summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek
AgeCommit message (Collapse)Author
2023-04-20wifi: rtw88: add bitmap for dynamic port settingsPo-Hao Huang
In order to support multiple interfaces, multiple port settings will be required. Current code always uses port 0 and should be changed. Declare a bitmap with size equal to hardware port number to record the current usage. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230414121135.17828-2-pkshih@realtek.com
2023-04-20wifi: rtw89: mac: use regular int as return type of DLE buffer requestPing-Ke Shih
The function to request DLE (data link engine) buffer uses 'u16' as return value that mixes error code, so change it to 'int' as regular error code. Also, treat invalid register value (0xfff) as an error. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230414082228.30766-1-pkshih@realtek.com
2023-04-17wifi: rtw89: add support of concurrent modePo-Hao Huang
Add iface_combination declaration to enable concurrent mode. Only two interfaces under same frequency is supported currently. We limit the role combination to be STA + P2P or STA + AP only for now until new feature is requested. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230415035016.15788-2-pkshih@realtek.com
2023-04-17wifi: rtw89: Disallow power save with multiple stationsPo-Hao Huang
Power saving for more than one station is not supported currently. Disallow entering PS mode when we have more than one associated stations. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230415035016.15788-1-pkshih@realtek.com
2023-04-17wifi: rtw89: update statistics to FW for fine-tuning performancePo-Hao Huang
Since firmware can't have proper statistics, driver update the statistics periodically to firmware to assist in tuning performance. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230415034900.15679-5-pkshih@realtek.com
2023-04-17wifi: rtw89: use struct instead of macros to set H2C command of hardware scanPing-Ke Shih
Remove macros that set H2C data. Instead, use struct and le32_encode_bits() with mask definition to make it clean. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230415034900.15679-4-pkshih@realtek.com
2023-04-17wifi: rtw89: refine scan function after chanctxPo-Hao Huang
Since we can get the current channel definition each interface maps to, remove store_op function that is no longer required to make things simple. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230415034900.15679-3-pkshih@realtek.com
2023-04-17wifi: rtw89: prohibit enter IPS during HW scanChih-Kang Chang
Mac80211 core may ask driver to change to idle mode during HW scan, then H2C command for HW scan will send failed since chip is in idle mode. Therefore, We check the SCANNING flag before entering IPS to prevent this behavior. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230415034900.15679-2-pkshih@realtek.com
2023-04-17wifi: rtw89: coex: send more hardware module info to firmware for 8851BPing-Ke Shih
8851B has various hardware module types, so BT coexistence in firmware needs these information to make decision. Add them to make 8851B work well. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230412012831.10519-5-pkshih@realtek.com
2023-04-17wifi: rtw89: coex: Update function to get BT RSSI and hardware counterChing-Te Ku
Correct Bluetooth RSSI count method. The 6dB is the gap between hardware packet sampled value and real RSSI value. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230412012831.10519-4-pkshih@realtek.com
2023-04-17wifi: rtw89: coex: Add path control register to monitor listChing-Te Ku
Chips use similar hardware for path control, but could different path/antenna configuration. Add these register to monitor, if there are wrong settings, these register can help to debug. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230412012831.10519-3-pkshih@realtek.com
2023-04-17wifi: rtw89: coex: Enable Wi-Fi RX gain control for free run solutionChing-Te Ku
When Wi-Fi & Bluetooth are both busy at the same time, Wi-Fi need to enable RX gain to protect Wi-Fi RX RF ability. Without this configure the interference from Bluetooth will bring a big impact to Wi-Fi RX. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230412012831.10519-2-pkshih@realtek.com
2023-04-17wifi: rtw89: fix power save function in WoWLAN modeChih-Kang Chang
In WoWLAN Mode, it's expected that WiFi chip could enter power save mode only after all setting is finished, but current wow_enter_lps function break the rule and may lead to WoWLAN function fail in low probability, so fix it. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230410053438.10682-2-pkshih@realtek.com
2023-04-17wifi: rtw89: support WoWLAN mode for 8852beChin-Yen Lee
To support WoWLAN mode for 8852be, we add one PLE quota setting and WoWLAN stub, which shows that supported WLAN events include receiving magic packet, rekey packet and deauth packet, and disconnecting from AP. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230410053438.10682-1-pkshih@realtek.com
2023-04-14wifi: rtl8xxxu: Support devices with 5-6 out endpointsBitterblue Smith
Handle them the same way as the devices with 3-4 USB out endpoints. This is needed for the RTL8192FU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/ef4bc66d-84f5-4021-efd7-1787d097519c@gmail.com
2023-04-14wifi: rtl8xxxu: Clean up some messy ifsBitterblue Smith
Add some new members to rtl8xxxu_fileops and use them instead of checking priv->rtl_chip. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/e24a5534-6e33-cfb9-0634-0caf4646513f@gmail.com
2023-04-14wifi: rtw89: fix crash due to null pointer of sta in AP modePing-Ke Shih
In AP mode, 'sta' could be NULL if sending broadcast/multicast packets, so we should check before accessing, or it causes crash: BUG: kernel NULL pointer dereference, address: 0000000000000004 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 2 PID: 92 Comm: kworker/u33:0 Tainted: G OE Workqueue: rtw89_tx_wq rtw89_core_txq_work [rtw89_core] RIP: 0010:rtw89_core_tx_update_desc_info+0x2cc/0x7d0 [rtw89_core] Code: e2 01 41 be 04 00 00 00 41 8b 84 c4 0c 01 00 00 75 0d 45 31 f6 ... RSP: 0018:ffffb4cf807afce0 EFLAGS: 00010297 RAX: 0000000000000001 RBX: ffffb4cf807afd48 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: ffffb4cf807afd30 R08: ffff9b28c1e59808 R09: ffff9b28c0297100 R10: 00000000052cf7c4 R11: 00000000052cf7c4 R12: ffff9b28c1602040 R13: ffff9b28c07b3000 R14: 0000000000000004 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9b2a73280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000004 CR3: 00000001ca410003 CR4: 00000000000606e0 Call Trace: <TASK> rtw89_core_tx_write+0x7c/0x100 [rtw89_core] rtw89_core_txq_work+0x1b4/0x530 [rtw89_core] process_one_work+0x222/0x3f0 worker_thread+0x50/0x3f0 kthread+0x16b/0x190 ? rescuer_thread+0x3a0/0x3a0 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> Fixes: e5307c9cd7ee ("wifi: rtw89: set data lowest rate according to AP supported rate") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230406093009.5869-1-pkshih@realtek.com
2023-04-14wifi: rtw89: correct 5 MHz mask settingEric Huang
Use primary channel index to determine which 5 MHz mask should be enable. This mask is used to prevent noise from channel edge to effect CCA threshold in wide bandwidth (>= 40 MHZ). Fixes: 1b00e9236a71 ("rtw89: 8852c: add set channel of BB part") Fixes: 6b0698984eb0 ("wifi: rtw89: 8852b: add chip_ops::set_channel") Cc: stable@vger.kernel.org Signed-off-by: Eric Huang <echuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230406072841.8308-1-pkshih@realtek.com
2023-04-14wifi: rtw89: 8851b: add tables for RFKPing-Ke Shih
These tables are used by RF calibrations to assist to configure PHY and RF registers. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230401142548.55466-4-pkshih@realtek.com
2023-04-14wifi: rtw89: 8851b: add BB and RF tables (2 of 2)Ping-Ke Shih
These tables contain BB and RF parameters that driver will load them into registers. It also contains TX power according to country, band, rate and so on. Increasing thermal can cause TX power degraded, so power tracking tables are defined to compensate TX power. Internal version of these tables: - HALBB_029_106_15 (V17) - HALRF_029_00_089 * Radio A 0x22 * NCTL 0x5 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230401142548.55466-3-pkshih@realtek.com
2023-04-14wifi: rtw89: 8851b: add BB and RF tables (1 of 2)Ping-Ke Shih
These tables contain BB and RF parameters that driver will load them into registers. It also contains TX power according to country, band, rate and so on. Increasing thermal can cause TX power degraded, so power tracking tables are defined to compensate TX power. Internal version of these tables: - HALBB_029_106_15 (V17) - HALRF_029_00_089 * Radio A 0x22 * NCTL 0x5 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230401142548.55466-2-pkshih@realtek.com
2023-04-14wifi: rtw89: pci: update PCI related settings to support 8851BPing-Ke Shih
Many settings of 8851B are like 8852A or 8852B. Change them to proper settings as hardware design. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330133324.19538-5-pkshih@realtek.com
2023-04-14wifi: rtw89: mac: update MAC settings to support 8851bPing-Ke Shih
Many settings of 8851B are the same as 8852B or 8852A, like DLE (Data link engine), security engine and so on. Update them according to hardware design. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330133324.19538-4-pkshih@realtek.com
2023-04-14wifi: rtw89: 8851b: fix TX path to path A for one RF path chipPing-Ke Shih
For two RF paths chips, we normally set path B as main path by default. 8851B has single one RF path, so set TX path to A and set mapping of path B to 0. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330133324.19538-3-pkshih@realtek.com
2023-04-14wifi: rtw89: read version of analog hardwarePing-Ke Shih
The chip contains digital and analog parts, and each of them has its own version number. This is used by BT coexistence mechanism to make strategy decision for different analog version. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330133324.19538-2-pkshih@realtek.com
2023-04-14wifi: rtw89: use hardware CFO to improve performanceEric Huang
Turn on hardware CFO (central frequency offset) compensation based on IC capability, and improve digital CFO compensation accuracy by using more fixed points number. Signed-off-by: Eric Huang <echuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330132352.13647-1-pkshih@realtek.com
2023-04-14wifi: rtw89: support parameter tables by RFE typeZong-Zhe Yang
One chip can have different RFE (RF front end) types which we will judge at runtime. And, different RFE types may use different RF parameter tables. Though we didn't really meet this case previously, we are going to meet it on upcoming chip RTL8851B. So, this commit handles parameter tables for runtime RFE type. We now encapsulate rtw89_txpwr_rule_<2/5/6>ghz tables into rtw89_rfe_parms. Then, each chip defines its default parameter tables, and if needed, it can configure extra parameter tables by RFE type. Finally we determine runtime parameter tables by RFE type if one is configured. Otherwise, we use the default parameter tables. For now, we just move all settings under default parameter tables. We will configure parameter tables by RFE types in separate commits afterwards. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330080331.37155-1-pkshih@realtek.com
2023-04-14wifi: rtw89: add firmware format version to backward compatible with older ↵Ping-Ke Shih
drivers In the discuss threads [1] [2], new firmware format break user space because older drivers can't recognize new firmware format. To avoid this, the new format will be named rtw89/rtw8852b_fw-1.bin and only new driver try to load it. Old drivers only load original and understandable firmware rtw89/rtw8852b_fw.bin. More, new driver will be still backward compatible with old firmware, so original firmware can be used by new driver. If there is newer firmware format is introduced, rtw89/rtw8852b_fw-2.bin will be given. The same rules will be applied like above. So, we will have firmware like below in linux-firmware in the future. rtw89/rtw8852b_fw-2.bin rtw89/rtw8852b_fw-1.bin rtw89/rtw8852b_fw.bin After this patch, MODULE_FIRMWARE() of 8852A/B/C become rtw89/rtw8852a_fw.bin rtw89/rtw8852b_fw-1.bin rtw89/rtw8852c_fw.bin [1] https://lore.kernel.org/linux-wireless/df1ce994-3368-a57e-7078-8bdcccf4a1fd@gmail.com/T/#m24cb43be31a762d0ea70bf07f27ae96c59f6931b [2] https://bugzilla.kernel.org/show_bug.cgi?id=217207 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230320130606.20777-4-pkshih@realtek.com
2023-04-14wifi: rtw89: use schedule_work to request firmwarePing-Ke Shih
Since we are going to load more than one firmware and some are not presented or optional, using asynchronous API request_firmware_nowait() will become complicated. Also, we want to use firmware_request_nowarn() to avoid warning messages when loading optional files. So, use schedule_work to be simpler. To abstract loading a firmware or file, define a struct rtw89_fw_req_info containing a struct firmware and a completion to ensure this firmware is loaded completely. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230320130606.20777-3-pkshih@realtek.com
2023-04-14wifi: rtw89: fw: use generic flow to set/check featuresZong-Zhe Yang
In early feature bitmap obtained from rtw89_early_fw_feature_recognize(), the bits needed to check get increased. It's more friendly to work with RTW89_CHK_FW_FEATURE(). So, we concentrate the flow of iterating FW feature configures and calling RTW89_SET_FW_FEATURE() for various uses. And then, we adjust rtw89_early_fw_feature_recognize() for RTW89_CHK_FW_FEATURE(). Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230320130606.20777-2-pkshih@realtek.com
2023-04-14wifi: rtw89: fix authentication fail during scanPo-Hao Huang
We used to store operating channel info after associated. However, scan might happen before that. Without switching back to operating channel, authentication or association might fail. Therefore, we switch back to operating channel when the scanning vif's BSSID is non-zero, which implies connected or during attempt to connect. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230411124832.14965-6-pkshih@realtek.com
2023-04-14wifi: rtw89: add flag check for power statePo-Hao Huang
Use POWER_ON flag to make sure power on/off is symmetric. Since both remain_on_channel and hw_scan both alter the power state, this makes sure that we don't enter/leave IPS mode twice. Also, replace IPS related functions with inline function that does similar logic so we can track it more easily. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230411124832.14965-5-pkshih@realtek.com
2023-04-14wifi: rtw89: add ieee80211::remain_on_channel opsPo-Hao Huang
Add support of remain on channel ops. Since channel context is required to enable multi-channel concurrent(MCC) and the current ROC in mac80211 don't support more than 1 channel context, add this to let P2P and other protocols relying on this work as expected. The off-channel duration and cancel timing is purely controlled by upper layers. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230411124832.14965-4-pkshih@realtek.com
2023-04-14wifi: rtw89: add function to wait for completion of TX skbsPo-Hao Huang
Allocate a per-skb completion to track those skbs we are interested in and wait for them to complete transmission with TX status. Normally, the completion object is freed by wait side, but it could be timeout result that complete side should free the object instead. Add a owner field with RCU to determine which side should free the object. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230411124832.14965-3-pkshih@realtek.com
2023-04-14wifi: rtw89: 8852c: add beacon filter and CQM supportPo-Hao Huang
Adding this supports beacon filter and connection quality monitor. To make host CPU wake up less, let firmware perform signal monitoring and beacon processing, then notify driver upon signal changes or beacon loss. This feature needs firmware 0.27.56 or newer to support it. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230411124832.14965-2-pkshih@realtek.com
2023-04-12wifi: rtw88: Add support for the SDIO based RTL8821CS chipsetMartin Blumenstingl
Wire up RTL8821CS chipset support using the new rtw88 SDIO HCI code as well as the existing RTL8821C chipset code. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-10-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: Add support for the SDIO based RTL8822CS chipsetMartin Blumenstingl
Wire up RTL8822CS chipset support using the new rtw88 SDIO HCI code as well as the existing RTL8822C chipset code. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-9-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: Add support for the SDIO based RTL8822BS chipsetJernej Skrabec
Wire up RTL8822BS chipset support using the new rtw88 SDIO HCI code as well as the existing RTL8822B chipset code. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-8-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: main: Reserve 8 bytes of extra TX headroom for SDIO cardsMartin Blumenstingl
For SDIO host controllers with DMA support the TX buffer physical memory address need to be aligned at an 8-byte boundary. Reserve 8 bytes of extra TX headroom so we can align the data without re-allocating the transmit buffer. While here, also remove the TODO comment regarding extra headroom for USB and SDIO. For SDIO the extra headroom is now handled and for USB it was not needed so far. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-6-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: main: Add the {cpwm,rpwm}_addr for SDIO based chipsetsMartin Blumenstingl
Initialize the rpwm_addr and cpwm_addr for power-saving support on SDIO based chipsets. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-5-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: mac: Support SDIO specific bits in the power on sequenceMartin Blumenstingl
Add the code specific to SDIO HCI in the MAC power on sequence. This is based on the RTL8822BS and RTL8822CS vendor drivers. Co-developed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-4-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsetsMartin Blumenstingl
Add a sub-driver for SDIO based chipsets which implements the following functionality: - register accessors for 8, 16 and 32 bits for all states of the card (including usage of 4x 8 bit access for one 32 bit buffer if the card is not fully powered on yet - or if it's fully powered on then 1x 32 bit access is used) - checking whether there's space in the TX FIFO queue to transmit data - transfers from the host to the device for actual network traffic, reserved pages (for firmware download) and H2C (host-to-card) transfers - receiving data from the device - deep power saving state The transmit path is optimized so DMA-capable SDIO host controllers can directly use the buffers provided because the buffer's physical addresses are 8 byte aligned. The receive path is prepared to support RX aggregation where the chipset combines multiple MAC frames into one bigger buffer to reduce SDIO transfer overhead. Co-developed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-3-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: Clear RTW_FLAG_POWERON early in rtw_mac_power_switch()Martin Blumenstingl
The SDIO HCI implementation needs to know when the MAC is powered on. This is needed because 32-bit register access has to be split into 4x 8-bit register access when the MAC is not fully powered on or while powering off. When the MAC is powered on 32-bit register access can be used to reduce the number of transfers but splitting into 4x 8-bit register access still works in that case. During the power on sequence is how RTW_FLAG_POWERON is only set when the power on sequence has completed successfully. During power off however RTW_FLAG_POWERON is set. This means that the upcoming SDIO HCI implementation does not know that it has to use 4x 8-bit register accessors. Clear the RTW_FLAG_POWERON flag early when powering off the MAC so the whole power off sequence is processed with RTW_FLAG_POWERON unset. This will make it possible to use the RTW_FLAG_POWERON flag in the upcoming SDIO HCI implementation. Note that a failure in rtw_pwr_seq_parser() while applying chip->pwr_off_seq can theoretically result in the RTW_FLAG_POWERON flag being cleared while the chip is still powered on. However, depending on when the failure occurs in the power off sequence the chip may be on or off. Even the original approach of clearing RTW_FLAG_POWERON only when the power off sequence has been applied successfully could end up in some corner case where the chip is powered off but RTW_FLAG_POWERON was not cleared. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-2-martin.blumenstingl@googlemail.com
2023-04-03wifi: rtw89: Remove redundant pci_clear_masterCai Huoqing
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230323112613.7550-5-cai.huoqing@linux.dev
2023-04-03wifi: rtw89: fix potential race condition between napi_init and napi_enablePing-Ke Shih
A race condition can happen if netdev is registered, but NAPI isn't initialized yet, and meanwhile user space starts the netdev that will enable NAPI. Then, it hits BUG_ON(): kernel BUG at net/core/dev.c:6423! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 417 Comm: iwd Not tainted 6.2.7-slab-dirty #3 eb0f5a8a9d91 Hardware name: LENOVO 21DL/LNVNB161216, BIOS JPCN20WW(V1.06) 09/20/2022 RIP: 0010:napi_enable+0x3f/0x50 Code: 48 89 c2 48 83 e2 f6 f6 81 89 08 00 00 02 74 0d 48 83 ... RSP: 0018:ffffada1414f3548 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa01425802080 RCX: 0000000000000000 RDX: 00000000000002ff RSI: ffffada14e50c614 RDI: ffffa01425808dc0 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000100 R12: ffffa01425808f58 R13: 0000000000000000 R14: ffffa01423498940 R15: 0000000000000001 FS: 00007f5577c0a740(0000) GS:ffffa0169fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5577a19972 CR3: 0000000125a7a000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> rtw89_pci_ops_start+0x1c/0x70 [rtw89_pci 6cbc75429515c181cbc386478d5cfb32ffc5a0f8] rtw89_core_start+0xbe/0x160 [rtw89_core fe07ecb874820b6d778370d4acb6ef8a37847f22] rtw89_ops_start+0x26/0x40 [rtw89_core fe07ecb874820b6d778370d4acb6ef8a37847f22] drv_start+0x42/0x100 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2] ieee80211_do_open+0x311/0x7d0 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2] ieee80211_open+0x6a/0x90 [mac80211 c07fa22af8c3cf3f7d7ab3884ca990784d72e2d2] __dev_open+0xe0/0x180 __dev_change_flags+0x1da/0x250 dev_change_flags+0x26/0x70 do_setlink+0x37c/0x12c0 ? ep_poll_callback+0x246/0x290 ? __nla_validate_parse+0x61/0xd00 ? __wake_up_common_lock+0x8f/0xd0 To fix this, follow Jonas' suggestion to switch the order of these functions and move register netdev to be the last step of PCI probe. Also, correct the error handling of rtw89_core_register_hw(). Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver") Cc: stable@vger.kernel.org Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Link: https://lore.kernel.org/linux-wireless/CAOiHx=n7EwK2B9CnBR07FVA=sEzFagb8TkS4XC_qBNq8OwcYUg@mail.gmail.com/T/#t Suggested-by: Jonas Gorski <jonas.gorski@gmail.com> Tested-by: Larry Finger<Larry.Finger@lwfinger.net> Reviewed-by: Larry Finger<Larry.Finger@lwfinger.net> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230323082839.20474-1-pkshih@realtek.com
2023-04-03wifi: rtw89: config EDCCA threshold during scan to prevent TX failedChih-Kang Chang
Need to configure EDCCA threshold to default value before scan, and recall original value after scan to prevent probe request can't be sent out. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230322060238.43922-1-pkshih@realtek.com
2023-04-03wifi: rtw89: fix incorrect channel info during scan due to ppdu_sts filteringChih-Kang Chang
We use ppdu_sts to obtain channel information from hardware, to ensure that the scan results have correct channel information. However, some of ppdu_sts that is filtered by the to_self check is also needed for the scan results. Therefore, we modify the filter part in front of CFO count. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230320093112.30466-3-pkshih@realtek.com
2023-04-03wifi: rtw89: remove superfluous H2C of join_infoChin-Yen Lee
We find that when starting WoWLAN, the second join_info H2C is unnecessary and leads WoWLAN not enter power save mode if using new firmware, so remove it. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230320093112.30466-2-pkshih@realtek.com
2023-04-03wifi: rtw89: set data lowest rate according to AP supported rateChih-Kang Chang
By default the driver uses the 1M and 6M rate (0x0) for data frames in 2 GHz and 5/6 GHz bands respectively. But the rate that might not AP supported. Therefore, We modify the data lowest rate according to the lowest of AP supported rate. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230320093112.30466-1-pkshih@realtek.com
2023-04-03wifi: rtw89: add counters of register-based H2C/C2HPing-Ke Shih
The register-based H2C/C2H are used to exchange information between driver and firmware, but only apply to narrow area because its data size is smaller than regular packet-based H2C/C2H. This kind of H2C/C2H must be paired. To identify if any H2C/C2H is missing, update counters to help diagnose this kind of problems. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230316063956.71687-1-pkshih@realtek.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 11:02:27 +0000