summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek
AgeCommit message (Collapse)Author
2020-02-12rtw88: 8822c: modify rf protection settingChien-Hsun Liao
According to some experiments, the original RF register protection setting of 8822c cannot perfectly make sure that there is no hardware PI write (direct) during direct write. Modify the setting so that the hardware block of PI would be turned off via rtw8822c_rstb_3wire() during the direct write, to avoid RF register racing. Note that 8822b uses SIPI write (indirect), so 8822b does not have such problem. Signed-off-by: Chien-Hsun Liao <ben.liao@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-02-12rtw88: Use secondary channel offset enumerationPing-Ke Shih
The hardware value of secondary channel offset isn't very intuitive. This commit adds enumeration, so we can easier to check the logic with the suffix of enumeration name, likes _UPPER or _LOWER. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-02-12rtw88: Use kfree_skb() instead of kfree()Dan Carpenter
sk_buff structs need to be freed with kfree_skb(), not kfree(). Fixes: b6c12908a33e ("rtw88: Add wowlan net-detect support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-02-12rtw88: 8822c: update power sequence to v16Tzu-En Huang
Fix switching xtal mode leads to BT USB error issue. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-02-12rtw88: add ciphers to suppress error messagePing-Ke Shih
Though hardware isn't implement CCMP-256, GCMP and GCMP-256, it's possible to fallback to use software de-/en-cryption implemented by mac80211. Without adding these chipers, kernel log will show something if we connect to a WPA3 enterprise AP, likes wlan0: failed to set key (1, ff:ff:ff:ff:ff:ff) to hardware (-524) Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-02-12rtw88: avoid holding mutex for cancel_delayed_work_sync()Yan-Hsuan Chuang
Driver could possibly be dead-locked while canceling works with *_sync() with mutex lock held. Those cancel_delayed_work_sync() functions will wait until the work is done, but if we hold the lock, they will never acquire the lock. To prevent this, simply release the lock and acquire again after the works have been canceled. And to avoid the works being queued again, check if the device is at RTW_FLAG_RUNNING state, otherwise just return and do nothing. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-02-12rtw88: move rtw_enter_ips() to the last when configPing-Ke Shih
When driver is coming up, mac80211 will set changed as ~0 (0xffffffff), and driver could enter IDLE state (power off) before switching channel or other config event. So move rtw_enter_ips() to the last, to make sure the driver completed the config events before going to IDLE state. So, moves leave/enter IPS config to be first/last one according to flag IEEE80211_CONF_IDLE. If there're more configureations we want to add in the future, they must locate between leave/enter IPS. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-02-12rtw88: pci: 8822c should set clock delay to zeroYan-Hsuan Chuang
Since RTL8822CE has enabled reference clock auto calibration, there is no need to add any clock delay for covering the timing gap of the reference clock. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-02-12rtw88: add rtw_read8_mask and rtw_read16_maskYan-Hsuan Chuang
Both are missing but could be used sometimes. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-02-12rtw88: remove unused parameter vif in rtw_lps_pg_info_get()Yan-Hsuan Chuang
vif is not used, remove it Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-02-03rtw88: Fix return value of rtw_wow_check_fw_statusChin-Yen Lee
Clang warns that ret is used uninitialzed. And we found that actually the return type should be "int" instead of "bool". Fixes: 44bc17f7f5b3 ("rtw88: support wowlan feature for 8822c") Link: https://github.com/ClangBuiltLinux/linux/issues/850 Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: btcoex: fix spelling mistake "initilized" -> "initialized"Colin Ian King
There is a spelling mistake in one of the fields in the btc_coexist struct, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8723ae: remove unused variablesYueHaibing
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/dm.c:16:18: warning: ofdmswing_table defined but not used [-Wunused-const-variable=] drivers/net/wireless/realtek/rtlwifi/rtl8723ae/dm.c:56:17: warning: cckswing_table_ch1ch13 defined but not used [-Wunused-const-variable=] drivers/net/wireless/realtek/rtlwifi/rtl8723ae/dm.c:92:17: warning: cckswing_table_ch14 defined but not used [-Wunused-const-variable=] These variable is never used, so remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8192ee: remove unused variablesYueHaibing
drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:15:18: warning: ofdmswing_table defined but not used [-Wunused-const-variable=] drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:61:17: warning: cckswing_table_ch1ch13 defined but not used [-Wunused-const-variable=] drivers/net/wireless/realtek/rtlwifi/rtl8192ee/dm.c:97:17: warning: cckswing_table_ch14 defined but not used [-Wunused-const-variable=] These variable is never used, so remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8821ae: remove unused variablesYueHaibing
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:142:17: warning: cckswing_table_ch1ch13 defined but not used [-Wunused-const-variable=] drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:178:17: warning: cckswing_table_ch14 defined but not used [-Wunused-const-variable=] drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:96:18: warning: ofdmswing_table defined but not used [-Wunused-const-variable=] These variable is never used, so remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8188ee: remove redundant assignment to variable condColin Ian King
Variable cond is being assigned with a value that is never read, it is assigned a new value later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: use shorter delay time to poll PS stateYan-Hsuan Chuang
When TX packet arrives, driver should leave deep PS state to make sure the DMA is working. After requested to leave deep PS state, driver needs to poll the PS state to check if the mode has been changed successfully. The driver used to check the state of the hardware every 20 msecs, which means upon the first failure of state check, the CPU is delayed 20 msecs for next check. This is harmful for some time-sensitive applications such as media players. So, use shorter delay time each check from 20 msecs to 100 usecs. The state should be changed in several tries. But we still need to reserve ~15 msecs in total in case of the state just took too long to be changed successfully. If the states of driver and the hardware is not synchronized, the power state could be locked forever, which mean we could never enter/leave the PS state. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: fix potential NULL skb access in TX ISRYan-Hsuan Chuang
Sometimes the TX queue may be empty and we could possible dequeue a NULL pointer, crash the kernel. If the skb is NULL then there is nothing to do, just leave the ISR. And the TX queue should not be empty here, so print an error to see if there is anything wrong for DMA ring. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: use true,false for bool variablezhengbin
Fixes coccicheck warning: drivers/net/wireless/realtek/rtw88/phy.c:1437:1-24: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8821ae: Make functions static & rm sw.hAmadeusz Sławiński
Some of functions which were exposed in sw.h, are only used in sw.c, so just make them static. This makes sw.h unnecessary, so remove it. Signed-off-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8723be: Make functions static & rm sw.hAmadeusz Sławiński
Some of functions which were exposed in sw.h, are only used in sw.c, so just make them static. This makes sw.h unnecessary, so remove it. Signed-off-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8723ae: Make functions static & rm sw.hAmadeusz Sławiński
Some of functions which were exposed in sw.h, are only used in sw.c, so just make them static. This makes sw.h unnecessary, so remove it. Signed-off-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8192se: Remove sw.h headerAmadeusz Sławiński
It has one define, which is already defined in include from reg.h. All the declared functions are not implemented anywhere, sw.c has ones with similar names which are already static. Signed-off-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8192ee: Make functions static & rm sw.hAmadeusz Sławiński
Some of functions which were exposed in sw.h, are only used in sw.c, so just make them static. This makes sw.h unnecessary, so remove it. Signed-off-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8192cu: Remove sw.h headerAmadeusz Sławiński
It has one define, which is already defined in include from reg.h. All functions are declared in their own headers and included in *.c files belonging to them. This makes sw.h unnecessary, so we can remove it. Signed-off-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8192ce: Make functions static & rm sw.hAmadeusz Sławiński
Some of functions which were exposed in sw.h, are only used in sw.c, so just make them static. The rtl92c_init_var_map function is not defined anywhere, while declared in sw.h. Two other functions are also declared in phy.h (which is included in sw.c) and their definitions are in phy.c Overall sw.h is unnecessary and can be removed. Signed-off-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8188ee: Make functions static & rm sw.hAmadeusz Sławiński
Some of functions which were exposed in sw.h, are only used in sw.c, so just make them static. This makes sw.h unnecessary, so remove it. Signed-off-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtlwifi: rtl8192cu: Fix typoAmadeusz Sławiński
Replace USB_VENDER_ID_REALTEK with USB_VENDOR_ID_REALTEK. Signed-off-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: change max_num_of_tx_queue() definition to inline in pci.hZong-Zhe Yang
It's more reasonable to define max_num_of_tx_queue() as an inline function. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: assign NULL to skb after being kfree()'edYan-Hsuan Chuang
Should assign NULL to skb after kfree(), in case of driver trying to free the same skb again. This could happen if driver failed to allocate an skb when building reserved page. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: use rtw_hci_stop() instead of rtwdev->hci.ops->stop()Chin-Yen Lee
Fix typo, should use rtw_hci_stop() Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: remove unused vif pointer in struct rtw_vifYan-Hsuan Chuang
As driver can easily get vif with container_of(), we can just remove it. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: remove unused variable 'in_lps'Yan-Hsuan Chuang
Unused, will not be used neither, because the hardware/firmware can only support one vif for LPS currnetly. If there's more than one vif, than driver will never enter LPS. So remove it. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: remove unused spinlockTzu-En Huang
dm_lock is never used. Thus, remove this redundant spinlock. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: 8822c: update power sequence to v15Tzu-En Huang
Update card enable power sequence flow, to fix CMD11 fail after reboot and wrong PLL clock. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: fix TX secondary channel offset of 40M if current bw is 20M or 40MPing-Ke Shih
TX secondary channel offset is valid only if current bandwidth is 80M, otherwise leave this value as zero. The wrong value of txsc40 causes MAC unpredictable behavior. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: fix rate mask for 1SS chipPing-Ke Shih
The rate mask is used to tell firmware the supported rate depends on negotiation. We loop 2 times for all VHT/HT 2SS rate mask first, and then only keep the part according to chip's NSS. This commit fixes the logic error of '&' operations for VHT/HT rate, and we should run this logic before adding legacy rate. To access HT MCS map, index 0/1 represent MCS 0-7/8-15 respectively. Use NL80211_BAND_xxx is incorrect, so fix it as well. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: Add wowlan net-detect supportChin-Yen Lee
Net-detect is an option of wowlan to allow the device to be woken up from suspend mode when configured network is detected. When user enables net-detect and lets the device enter suspend state, wowlan firmware will periodically scan until beacon or probe response of configured networks are received. Between two scans, wowlan firmware keeps wifi chip in idle mode to reduce power consumption. If configured networks are detected, wowlan firmware will trigger resume process. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: Add wowlan pattern match supportChin-Yen Lee
Pattern match is an option of wowlan to allow the device to be woken up from suspend mode when receiving packets matched user-designed patterns. The patterns are written into hardware cam in suspend flow if users have set up them. If packets matched designed pattern are received, wowlan firmware will get an interrupt and then wake up the device. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: support wowlan feature for 8822cChin-Yen Lee
Wake on WLAN(wowlan) is a feature which allows devices to be woken up from suspend state through wlan events. When user enables wowlan feature and then let the device enter suspend state, wowlan firmware will be loaded by the driver and periodically monitors wifi packets. Power consumption of wifi chip will be reduced in this state. If wowlan firmware detects that specific wlan event happens, it will issue wakeup signal to trigger resume process. Driver will load normal firmware and let wifi chip return to the original state. Currently supported wlan events include receiving magic packet, rekey packet and deauth packet, and disconnecting from AP. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: load wowlan firmware if wowlan is supportedChin-Yen Lee
Driver used to download normal firmware only, but some devices support wowlan and require to download wowlan firmware when system suspends. So modify rtw_load_firmware() and its callback to allow driver to download both normal and wowlan firmware. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: add interface config for 8822cYan-Hsuan Chuang
Some devices need to configure interface/HCI related reigsters in power on flow. Add interface_cfg for HCI for the settings. The driver only supports RTL8822BE/RTL8822CE now, and since RTL8822BE does not need to configure PCIE, the configuration is only added for RTL8822CE. Without it, some of the RTL8822CE device can crash and disconnected to host in suspend/wowlan mode. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: pci: reset dma when reset pci trx ringChin-Yen Lee
When PCI trx rings are reset, the DMA engine should also be reset. Otherswise, the rx_tag of rx flow is not synchronous to hw. Remove DMA reset when rtw_pci_start() as we added it in rtw_pci_setup(). Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26rtw88: pci: reset ring index when release skbs in tx ringChin-Yen Lee
When skbs queued for each TX ring are relased in PCI stop flow, the ring index should be reset at the same time. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192de: use generic rtl_signal_scale_mappingMichael Straube
Function _rtl92de_signal_scale_mapping is identical to the generic version rtl_signal_scale_mapping. Remove _rtl92de_signal_scale_mapping and use the generic function. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192cu: use generic rtl_signal_scale_mappingMichael Straube
Function _rtl92c_signal_scale_mapping is identical to the generic version rtl_signal_scale_mapping. Remove _rtl92c_signal_scale_mapping and use the generic function. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192ce: use generic rtl_signal_scale_mappingMichael Straube
Function _rtl92ce_signal_scale_mapping is identical to the generic version rtl_signal_scale_mapping. Remove _rtl92ce_signal_scale_mapping and use the generic function. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192de: use generic rtl_query_rxpwrpercentageMichael Straube
Function _rtl92d_query_rxpwrpercentage is identical to the generic version rtl_query_rxpwrpercentage. Remove _rtl92d_query_rxpwrpercentage and use the generic function. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192cu: use generic rtl_query_rxpwrpercentageMichael Straube
Function _rtl92c_query_rxpwrpercentage is identical to the generic version rtl_query_rxpwrpercentage. Remove _rtl92c_query_rxpwrpercentage and use the generic function. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rtlwifi: rtl8192ce: use generic rtl_query_rxpwrpercentageMichael Straube
Function _rtl92c_query_rxpwrpercentage is identical to the generic version rtl_query_rxpwrpercentage. Remove _rtl92c_query_rxpwrpercentage and use the generic function. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>