summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mwifiex
AgeCommit message (Collapse)Author
2015-01-29mwifiex: channel switch support for mwifiexAvinash Patil
This patch adds cfg80211 channel_switch support for mwifiex. Upon receiving channel switch request, driver would parse channel switch announcement IE from beacon_data. If TX is blocked, netdev queues are stopped. IEs from csa_beacon are then parsed and set to FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: handle radar detect event from FWAvinash Patil
This patch adds support for radar_detected event from FW. Driver in turn would stop netdev queues to stop TX traffic and issue RADAR_DETECT event to cfg80211. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: support for channel report for radar detectionAvinash Patil
This patch adds support for channel report enabling. Channel report event happens if radar is detected on specified channel after driver has issued radar detect command within CAC time. Driver in turn sends RADAR_DETECTED event to cfg80211 to tell radar was detected within CAC time. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: add cfg80211 start_radar_detection handlerAvinash Patil
This patch adds support for cfg80211 start_radar_detection handler. Upon reception of start_radar_detection, driver prepares radar detect command to FW. Delayed work is queued for CAC time which sends radar detection finished event to cfg80211. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: separate function for parsing head and tail IEsAvinash Patil
Head & Tail IEs are supposed to be added to beacon and probe response. This patch adds separate function for parsing head and tail IEs from cfg80211_beacon_data and sets them to FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: refactor start_ap handlerAvinash Patil
Refactor mwifiex_cfg80211_start_ap by creating separate function to set AP channel and another for configuring other AP parameters and starting AP. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: update IEs after AP has startedAvinash Patil
This patch moves IE management routine to end of start_ap handler. IEs now would be updated after AP has started. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: store AP configuration in private structureAvinash Patil
Store AP configuration in private structure so that we know current AP configuration. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: do not send regulatory update while starting APAvinash Patil
When regulatory domain changes, cfg80211 already issues request to change regulatory domain to driver via reg_notifier. There is no need to set regulatory again during start_ap. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: support conversion to any virtual interface typeAvinash Patil
Currently, we support virtual interface type change from station<=>adhoc or station <=> p2p client/GO. This patch adds support to change virtual interface type to any of the type advertised in interface combinations. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: handle PS events on AP interface as wellAvinash Patil
This patch adds support to handle PS events on AP interface as well. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: manage virtual interface limits efficientlyAvinash Patil
Currently interface limits are checked by seeing if bss_mode for particular priv is set. If bss_mode is not set, interface creation is allowed. This patch adds framework to initializes maximum virtual interfaces supported during load time and check current number of interfaces created agains allowed interface limit during new virtual interface creation. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: add init parameter to init command routineAvinash Patil
FW initialization routine can also be called while changing virtual interface types. This patch adds bool parameter "init" to init command routine so as to differentiate between initialization during driver load and change virtual interface handler. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: store permanant mac address in adapter structureAvinash Patil
This would be used to set mac address while changing virtual interface to different types. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: do not declare wdev as pointerAvinash Patil
wdev is used even after del_virtual_interface handler in cfg80211 in nl80211_post_doit. Since we have freed wdev in handling of del_virtual_intf, this can result into crash while deleting interface. Avoid this be not declaring wdev which part of mwifiex_private structure but struct wireless_dev type. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: set wiphy params only onceAvinash Patil
RTS threshold, fragmentation threshold are per device properties. Setting them on any interface would be reflected for all other interfaces as well. This patch removes unnesessary command download per interface. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: remove redundant nick_name variableAvinash Patil
This is not used anywhere execpt initialization. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-27mwifiex: selectively choose ext_scan supportAvinash Patil
Some devices do not support extended scan. This patch adds support to enble ext_scan selectively. For SD/PCIe interfaces, deefine ext_scan_support as part of card structure and use it to initialize ext_scan in adapter during registering device. For USB interfaces, we initialize ext_scan during register_dev handler. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-27mwifiex: add support for USB8801Yogesh Ashok Powar
USB8801 is Marvell's 1x1 802.11bgn offering. Patch adds Device IDs support and defines TX buffer size. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-27mwifiex: add support for SD8801Yogesh Ashok Powar
SD8801 is Marvell's 1x1 802.11bgn offering. This patch adds Device IDs for SD8801 and also defines card structure which has definition for register offsets, buffer sizes etc. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Reviewed-by: James Cameron <quozl@laptop.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-27mwifiex: set netif carrier off in ndo_openJohannes Berg
This patch adds fix to set carrier state off during ndo_open. Carrier should be set to ON when device is ready to send data. In case of station/adhoc interface device is able to transfer data after successful association/join operation. For AP this would be after bss_active event. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23mwifiex: do not emit messages while holding spinlockAvinash Patil
Avoid printing dev_{warn/dbg} messages while holding spinlock. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23mwifiex: check driver status in connect and scan handlersAmitkumar Karwar
Ignore scan and connection requests from cfg80211 when driver unload is in process or previous command has timed out due to a firmware bug. This patch fixes corner case system crash issues. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-22Merge commit 'c1e140bf79d817d4a7aa9932eb98b0359c87af33' from mac80211-nextKalle Valo
Patch "ath9k: Fix no-ack frame status" needs these mac80211 patches: commit 5cf16616e152dd5c274a65954c77f64892d025a8 Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> Date: Wed Dec 10 21:26:11 2014 +0530 mac80211: Fix accounting of multicast frames commit 6b127c71fbdd3daacfd8b9f80b8e6ebfb70a889e Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> Date: Wed Dec 10 21:26:10 2014 +0530 mac80211: Move IEEE80211_TX_CTL_PS_RESPONSE Conflicts: drivers/net/wireless/ath/wil6210/cfg80211.c drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c
2015-01-15cfg80211: change bandwidth reporting to explicit fieldJohannes Berg
For some reason, we made the bandwidth separate flags, which is rather confusing - a single rate cannot have different bandwidths at the same time. Change this to no longer be flags but use a separate field for the bandwidth ('bw') instead. While at it, add support for 5 and 10 MHz rates - these are reported as regular legacy rates with their real bitrate, but tagged as 5/10 now to make it easier to distinguish them. In the nl80211 API, the flags are preserved, but the code now can also clearly only set a single one of the flags. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-08cfg80211: remove enum station_info_flagsJohannes Berg
This is really just duplicating the list of information that's already available in the nl80211 attribute, so remove the list. Two small changes are needed: * remove STATION_INFO_ASSOC_REQ_IES complete, but the length (assoc_req_ies_len) can be used instead * add NL80211_STA_INFO_RX_DROP_MISC which exists internally but not in nl80211 yet This gets rid of the duplicate maintenance of the two lists. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-08cfg80211: remove "channel" from survey namesJohannes Berg
All of the survey data is (currently) per channel anyway, so having the word "channel" in the name does nothing. In the next patch I'll introduce global data to the survey, where the word "channel" is actually confusing. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-07mwifiex: tdls: Use setup_timerJulia Lawall
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07mwifiex: 11n_rxreorder: Use setup_timerJulia Lawall
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07mwifiex: main: Use setup_timerJulia Lawall
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: Add support for wowlan disconnectMaithili Hinge
This patch adds support for wowlan disconnect. Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: Move code for wowlan magic-packet and patterns to a functionMaithili Hinge
This patch moves code for wowlan magic-packet and patterns to a function mwifiex_set_mef_filter. Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: Increase priority of firmware download messageAmitkumar Karwar
When driver is loaded, it is important to know if FW was already active or it is freshly downloaded. This patch increases the priority of these messages. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: do not release lock during list_for_each_entry_safe()Amitkumar Karwar
As we are releasing the lock, during next iteration we may end up getting page fault if other thread has already deleted that node. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: wakeup pending wait queuesAmitkumar Karwar
Wakeup pending wait queues in unload path. This will help to avoid soft lockup issues in corner cases. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: add wakeup timer based recovery mechanismAmitkumar Karwar
If host fails to wakeup the firmware, we will trigger card reset after 3 second timeout. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: increase delay during card resetMarc Yang
200ms is the requirement to allow VDD1.1 and VDD1.8 to drop to have proper reset. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: Adjust calling place of mwifiex_terminate_workqueueMarc Yang
Workqueue needs to be flushed early when removing card, otherwise soft lockup issue may happen because main_process is triggered by interrupt while card is being removed. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: remove redundant flag MWIFIEX_HW_STATUS_FW_READYAmitkumar Karwar
This flag is never set but checked at two places. We will get rid of this code. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: get supported BA stream info from FWAvinash Patil
This patch adds support to get number of BA streams supported information from FW. Some newer chips(e.g. 8897 series) support 4 BA streams for TX; so driver should not disallow BA stream setup just after 2 streams have been established. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: make tx packet 64 byte DMA alignedXinming Hu
This patch adds support for DMA alignment of 64 bytes for TX packets. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: do not send key material cmd when delete wep keyXinming Hu
This patch fixes memory corruption reported by community developer. "Memory corruption occurs in mwifiex_ret_802_11_key_material_v1() when a short command response is received without a key length causing non initialised memory to be interpreted as the key length resulting in a memcpy() overwriting the part of the driver's private data structure beyond the key area." For v1 key material API firmwares, there is no need to send command to delete WEP key. WEP encryption/decryption is controlled by mac_control command. This patch avoids sending key material command in del_key case. Reported-by: Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: enable -D__CHECK_ENDIAN__ for sparse by defaultAvinash Patil
Enable the endian checks by default. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: module parameter for deep sleep configurationAvinash Patil
This patch adds module parameter for auto deepsleep configuration. By default, module_param is 0 and auto deep sleep is enabled. If mwifiex driver is loaded with disable_auto_ds=1, deep sleep configuration would not be downloaded to FW and FW would not enter deepsleep upon initializing. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: save sdio register values before firmware dumpXinming Hu
This patch saves sdio registers value before firmware dump, this can be used to find out reason for FW dump. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: save driver information to file when firmware dumpXinming Hu
This patch adds support to dump driver information to a file when firmware dump happens. This information can be used to root casue FW crash. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: move debug_data dump function to common utililty fileXinming Hu
mwifiex_debug_info also need be save to file when firmware dump happens. Move its dump implementation function to commmon utilility file, thus it can be reused in firmware dump function. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: move pm_wakeup_card_complete definition to usb.cXinming Hu
Move mwifiex_pm_wakeup_card_complete handler to source file. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: add rx histogram statistics supportXinming Hu
This patch add a new debugfs item histogram used for reporting rx data packet statitics(rx rate, snr, noise floor, signal strenth) to userspace. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: add bcn_rcv_cnt and bcn_miss_cnt in getlog debugfsXinming Hu
This patch add receive beacon count and miss beacon count statistics in debugfs getlog item. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 12:35:47 +0000