summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mwifiex/main.h
AgeCommit message (Collapse)Author
2015-01-29mwifiex: add init parameter to init command routineAvinash Patil
FW initialization routine can also be called while changing virtual interface types. This patch adds bool parameter "init" to init command routine so as to differentiate between initialization during driver load and change virtual interface handler. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: store permanant mac address in adapter structureAvinash Patil
This would be used to set mac address while changing virtual interface to different types. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: do not declare wdev as pointerAvinash Patil
wdev is used even after del_virtual_interface handler in cfg80211 in nl80211_post_doit. Since we have freed wdev in handling of del_virtual_intf, this can result into crash while deleting interface. Avoid this be not declaring wdev which part of mwifiex_private structure but struct wireless_dev type. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: remove redundant nick_name variableAvinash Patil
This is not used anywhere execpt initialization. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: add wakeup timer based recovery mechanismAmitkumar Karwar
If host fails to wakeup the firmware, we will trigger card reset after 3 second timeout. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: remove redundant flag MWIFIEX_HW_STATUS_FW_READYAmitkumar Karwar
This flag is never set but checked at two places. We will get rid of this code. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: save sdio register values before firmware dumpXinming Hu
This patch saves sdio registers value before firmware dump, this can be used to find out reason for FW dump. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: save driver information to file when firmware dumpXinming Hu
This patch adds support to dump driver information to a file when firmware dump happens. This information can be used to root casue FW crash. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: add rx histogram statistics supportXinming Hu
This patch add a new debugfs item histogram used for reporting rx data packet statitics(rx rate, snr, noise floor, signal strenth) to userspace. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: report tdls peers in debugfsXinming Hu
This patch add provision to show TDLS peer table in debugfs file. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-05mwifiex: delete peer station's RA list upon deauthenticationAvinash Patil
This patch adds support to delete peer station's RA lists upon station deautheticate event on AP interface. Patch also decrements TX pending count upon removing packets from RA list. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-25mwifiex: add Tx status support for ACTION framesAmitkumar Karwar
ACK status (0/1) for ACTION frames is informed to cfg80211. We will extend existing logic used for EAPOL frames. The cfg80211 API is different here. Also, we need to explicitly free cloned skb. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-25mwifiex: add Tx status support for EAPOL packetsAmitkumar Karwar
Firmware notifies the driver through event if EAPOL data packet has been acked or not. We will inform this status to userspace listening on a socket. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-19Merge commit '4e6ce4dc7ce71d0886908d55129d5d6482a27ff9' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-11-17mwifiex: add auto TDLS supportAvinash Patil
This patch adds auto TDLS support to mwifiex. Auto TDLS functionality works as follows: 1. Whenever userspace application has triggered TDLS connection with any peer, driver would store this peer mac address details in its database. 2. After this driver whenever driver receives packet on direct link, it would store rssi and timestamp in peer information. 3. Whenever a packet is to be transmitted to non-AP peer in station mode, driver would check if TDLS link can be established by looking at peer RSSI information. Driver would initiate TDLS setup in such cases. 4. Periodic timer is used for updating peer information. 5. Auto TDLS peer list & timer are cleared during disconnection or driver unload. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17mwifiex: module load parameter for interface creationAvinash Patil
This patch adds module load parameter driver_mode for mwifiex which would enable driver to create AP or P2P client interface while loading module. driver_mode is bitmap of interface modes for station, AP and P2P client. Station interface is created by default and is unaffected by driver_mode parameter. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11mwifiex: fix out of memory issue observed for USB chipsetsAmitkumar Karwar
On some platforms, system goes out of memory during heavy Rx traffic with our USB chipsets. In case of SDIO/PCIe, after receiving 50 packets in Rx queue we stop processing interrupts till packets pending fall below low threshold i.e 20. We don't have similar logic for USB, so if host platform is slow, we would hit a case where firmware keeps on pushing packets at high speed than driver/kernel can process. We will stop submitting URBs for Rx data when pending packet count reaches high threshold and restart them when enough packets are consumed to solve the problem. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=85071 Reported-by: Marek Belisko <marek.belisko@gmail.com> Tested-by: Marek Belisko <marek.belisko@gmail.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11mwifiex: remove data_complete handlerAvinash Patil
This patch removes redundant data complete handler. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11mwifiex: rx workqueue support for USB interfaceAvinash Patil
This patch adds RX workqueue support for USB interfaces. Currently rx_pending is applicable for cmd/events and Rx data in USB interface. Let's use it only for Rx data. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-31mwifiex: channel statistics support for mwifiexAvinash Patil
This patch adds support to record channel statistics during scan. With extended scan, scan results are returned as events from FW while channel statistics are part of scan command response. We store these channel statistics in adapter. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Xinmin Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30mwifiex: restart rxreorder timer correctlyMarc Yang
During 11n RX reordering, if there is a hole in RX table, driver will not send packets to kernel until the rxreorder timer expires or the table is full. However, currently driver always restarts rxreorder timer when receiving a packet, which causes the timer hardly to expire. So while connected with to 11n AP in a busy environment, ping packets may get blocked for about 30 seconds. This patch fixes this timer restarting by ensuring rxreorder timer would only be restarted either timer is not set or start_win has changed. Signed-off-by: Chin-Ran Lo <crlo@marvell.com> Signed-off-by: Plus Chen <pchen@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30mwifiex: remove unnecessary rx_q lockAvinash Patil
SKB lists have their own lock. So this lock is not needed. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30mwifiex: add more dump information for PCIe interfaceAmitkumar Karwar
We will now dump MAC, APU, CIU, ICU firmware memory segments also for PCIe interface. Following is the updated userspace script which reads firmware dump information. mwifiex_pcie_fw_dump.sh: #!/bin/bash ethtool --set-dump mlan0 0 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/ITCM.log ethtool --set-dump mlan0 1 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/DTCM.log ethtool --set-dump mlan0 2 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/SQRAM.log ethtool --set-dump mlan0 3 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/IRAM.log ethtool --set-dump mlan0 4 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/APU.log ethtool --set-dump mlan0 5 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/CIU.log ethtool --set-dump mlan0 6 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/ICU.log ethtool --set-dump mlan0 7 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/MAC.log Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15mwifiex: add rx workqueue supportAvinash Patil
This patch adds RX work queue support to mwifiex. Packets received are queued to internal queue which are then processed by scheduling a work item for RX process. RX work is enabled only on SMP systems. Reviewed-by: James Cameron <quozl@laptop.org> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15mwifiex: remove low priority scan handlingAmitkumar Karwar
We have a logic in driver to delay or abort low priority scan to serve Tx traffic effectively. With scan channel gap support added, firmware now allows driver to send Tx data while scan operation is in progress. Hence low priority scan handling in driver is not required now. This patch removes related code. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15mwifiex: remove redundant variable report_scan_resultAmitkumar Karwar
This variable is never used, get rid of it. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15mwifiex: bring in scan channel gap featureAvinash Patil
With scan channel gap when any station/AP is active, FW comes back to connected channel for any pending data transfter after scanning each channel. We set scan channel gap TLV to FW in scan command when any of the interface is active. This enables scan channel gap in FW. Also when scan channel gap is enabled, we would scan maximum channels allowed by FW. Scan channel gap is supported only on FW with V15 FW API. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28mwifiex: rename macro and variables related to API revisionAmitkumar Karwar
We will remove 'fw' prefix from these variable and macro names and make them generic. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: update Copyright to 2014Xinming Hu
This patch updates mwifiex Copyright to 2014. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: add hscfg to debugfsXinming Hu
Some SDIO controllers do not support MMC_PM_KEEP_POWER properly. To test host sleep feature without putting the system into sleep we need to simulate host sleep configuration & handshake between driver and firmware using customized parameters. This patch adds hscfg debugfs item, with which user could change host sleep parameters for debugging. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: use generic 'iface_work' workqueue for SDIO interfaceAmitkumar Karwar
Existing dedicated card_reset work queue is replaced with the interface specific workqueue pointer provided by mwifiex module. Also new work flag is added for card reset task. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: add firmware dump feature for PCIeAmitkumar Karwar
Firmware dump feature is added for PCIe based chipsets which can be used with the help of ethtool commands. 1) Trigger firmware dump operation: ethtool --set-dump mlan0 0xff When the operation is completed, udev event will be sent to trigger external application. 2) Following udev rule can be used to get the data from ethtool: DRIVER=="mwifiex_pcie", ACTION=="change", RUN+="/sbin/mwifiex_pcie_fw_dump.sh" mwifiex_pcie_fw_dump.sh: #!/bin/bash ethtool --set-dump mlan0 0 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/ITCM.log ethtool --set-dump mlan0 1 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/DTCM.log ethtool --set-dump mlan0 2 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/SQRAM.log ethtool --set-dump mlan0 3 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/IRAM.log Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29mwifiex: use time_after()Manuel Schölling
To be future-proof and for better readability the time comparisons are modified to use time_after() instead of plain, error-prone math. Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville
2014-05-19cfg80211: constify MAC addresses in cfg80211 opsJohannes Berg
This propagates through all the drivers and mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-24Revert "mwifiex: add firmware dump feature for PCIe"John W. Linville
This reverts commit e050c76fcf49599c5b98e4614392dc87c69123a6. I'm not sure what crack pipe I was using when I merged this... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: add firmware dump feature for PCIeAmitkumar Karwar
Firmware dump feature is added for PCIe based chipsets. Separate file will be created at /var/log/fw_dump_* for each memory segment. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: add fw_dump debugfs fileAmitkumar Karwar
This option be useful to dump firmware memory for debugging purpose. Actual code to dump firmware momory for SDIO and PCIe chipsets will be added later. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: remove redundant 'fw_load' completion structureAmitkumar Karwar
'add_remove_card_sem' semaphore already takes care of synchronization for driver load and unload threads. Hence there won't be a case when unload thread is waiting on 'wait_for_completion(fw_load)'. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27mwifiex: cancel pending commands during host sleepAmitkumar Karwar
Sometimes we may end up downloading other commands when host sleep is configured. This patch makes sure that pending commands are cancelled and we stop queueing further commands during host sleep. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-14mwifiex: add AMSDU inside AMPDU supportAmitkumar Karwar
Currently AMPDU aggregation is preferred over AMSDU. AMSDU aggregation is performed only if AMPDU streams in firmware are full. This patch adds simultaneous AMSDU and AMPDU aggregation support. This mechanism helps to improve throughput. AMSDU is enabled only for 8897 chipsets which supports 4K transmit buffer. User can disable AMSDU using 'disable_tx_amsdu' module parameter. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-14mwifiex: add VHT MCS rate configuration supportAmitkumar Karwar
During Tx rate configuration, newer firmware V15 expects bitmap for VHT MCS rates as well. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-14mwifiex: extract firmware API version numberAmitkumar Karwar
The firmware API version number will be used for future patches to support different firmware API specs. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwifiex: update MCS information as per antenna settingsAmitkumar Karwar
Even if the device is changed to 1X1 mode, data is sent with higher MCS rates after association. This patch fixes the problem by updating MCS information field in HT capability when antenna setting changes so that correct information will be advertised in association and probe request. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwifiex: replace num_cmd_timeout with is_cmd_timedoutAmitkumar Karwar
Command timeout happens when firmware goes into bad state. There is no chance that next command will be successful after this. Hence we will maintain a flag instead of count. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwifiex: get rid of extra num_cmd_timeout variableAmitkumar Karwar
We already have one in mwifiex_adapter structure. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwifiex: stop AP at shutdown timeAmitkumar Karwar
Deauth is sent to AP when the device is acting as station at shutdown time. Similarly we should stop AP operation also. mwifiex_deauthenticate() takes care closing the connection based on provided interface type. Add a new function to simplify the code. Reported-by: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwifiex: remove global variable cmd_wait_q_requiredBing Zhao
There is a race condition while queuing synchronous command and asynchronous command requested from different threads, because the wait_q_enabled flag is set based on a global variable cmd_wait_q_required. The issue is fixed by removing this global variable and using a unified function with an argument 'sync' passed into the function. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwifiex: Track BA sequence number resetPaul Stewart
Some stations reset the sequence number for traffic-ids (TIDs) as they initiate a block-ACK session. In order to detect such behavior, mwifiex must note the starting sequence number given during the ADDBA request. If the first received sequence number after the ADDBA falls outside the receive window for this TID but after the the ADDBA starting sequence number, we can assume that this AP has reset its sequence number during the ADDBA. In this case we must adjust the input window backward to incorporate this received sequence number instead of ignoring it. Otherwise, we could fail to successfully retrieve an arbitrarily large number of downstream frames at the beginning of the block-ACK session. Signed-off-by: Paul Stewart <pstew@chromium.org> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: add key material v2 supportAvinash Patil
This patch adds key material V2 support to mwifiex. Newer FW supports this feature and FW KEY API version is used to determine which command structure needs to be used. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 17:16:24 +0000