summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek
AgeCommit message (Collapse)Author
2025-01-13wifi: mt76: mt7915: Fix mesh scan on MT7916 DBDCNicolas Cavallari
commit c4f075582304 ("wifi: mt76: mt7915: fix command timeout in AP stop period") changes the behavior of mt7915_bss_info_changed() in mesh mode when enable_beacon becomes false: it calls mt7915_mcu_add_bss_info(..., false) and mt7915_mcu_add_sta(..., false) while the previous code didn't. These sends mcu commands that apparently confuse the firmware. This breaks scanning while in mesh mode on AsiaRF MT7916 DBDC-based cards: scanning works but no mesh frames get sent afterwards and the firmware seems to be hosed. It breaks on MT7916 DBDC but not on MT7915 DBDC. Fixes: c4f075582304 ("wifi: mt76: mt7915: fix command timeout in AP stop period") Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Link: https://patch.msgid.link/20240927085350.4594-1-nicolas.cavallari@green-communications.fr Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: mt7615: Convert comma to semicolonShen Lichuan
To ensure code clarity and prevent potential errors, it's advisable to employ the ';' as a statement separator, except when ',' are intentionally used for specific purposes. Signed-off-by: Shen Lichuan <shenlichuan@vivo.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patch.msgid.link/20240911034243.31596-1-shenlichuan@vivo.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: mt7925: fix off by one in mt7925_load_clc()Dan Carpenter
This comparison should be >= instead of > to prevent an out of bounds read and write. Fixes: 9679ca7326e5 ("wifi: mt76: mt7925: fix a potential array-index-out-of-bounds issue for clc") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/84bf5dd2-2fe3-4410-a7af-ae841e41082a@stanley.mountain Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: mt7921s: fix a potential firmware freeze during startupLeon Yen
The maximum command quota of the firmware may be exceeded because the command to retrieve the quota setting has not been taken into account. This patch considers not only the quota usage of the command retrieving quota settings but also limits the total quota usage. Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20240916060157.10157-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: mt792x: add P2P_DEVICE supportHao Zhang
Regist the NL80211_IFTYPE_P2P_DEVICE to support p2p device for mt792x chips Signed-off-by: Hao Zhang <hao.zhang.mediatek@gmail.com> Signed-off-by: allan.wang <allan.wang@mediatek.com> Signed-off-by: Ming Yen Hsieh <MingYen.Hsieh@mediatek.com> Link: https://patch.msgid.link/20240919081713.23787-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: mt7996: set correct background radar capabilityStanleyYP Wang
Some of the variants do not support background radar, so add a helper to report background radar capability. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/20240926032440.15978-3-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: mt7996: add support for more variantsShayne Chen
Current varaints supported: - mt7996 chipset: tri-band, 4+4+4 NSS, eFEM - mt7992 chipset: dual-band, 4+4 NSS, eFEM This patch adds support for the following variants: - mt7996 chipset: - tri-band, 4+4+4 NSS, iFEM - tri-band, 2+3+3 NSS, eFEM - tri-band, 2+3+3 NSS, iFEM - mt7992 chipset: - dual-band, 4+4 NSS, iFEM - dual-band, 4+4 NSS, with band0 iFEM and band1 eFEM - dual-band, 2+3 NSS, eFEM - dual-band, 2+3 NSS, iFEM Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/20240926032440.15978-2-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-13wifi: mt76: mt7996: extend flexibility of mt7996_mcu_get_eeprom()Shayne Chen
Support passing customized buffer pointer and length to mt7996_mcu_get_eeprom(). This is the preparation for adding more variants support which needs to prefetch FEM module from efuse, and also fixes potential OOB issue when reading the last efuse block. Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/20240926032440.15978-1-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-10wifi: mt76: mt7996: fix invalid interface combinationsShayne Chen
Setting beacon_int_min_gcd and NL80211_IFTYPE_ADHOC in the same interface combination is invalid, which will trigger the following warning trace and get error returned from wiphy_register(). [ 10.080325] Call trace: [ 10.082761] wiphy_register+0xc4/0x76c [cfg80211] [ 10.087465] ieee80211_register_hw+0x800/0xac4 [mac80211] [ 10.092868] mt76_register_device+0x16c/0x2c0 [mt76] [ 10.097829] mt7996_register_device+0x740/0x844 [mt7996e] Fix this by removing unused adhoc iftype. Fixes: 948f65249868 ("wifi: mt76: mt7996: advertize beacon_int_min_gcd") Reported-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Tested-By: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241007135133.5336-1-shayne.chen@mediatek.com
2024-12-04wifi: mac80211: get tx power per linkRameshkumar Sundaram
ML interfaces can have multiple affiliated links to it and hence there is a need to report tx power of specified link rather deflink. Add changes to report tx power of requested link from mac80211, also pass link id as an argument in get_tx_power op so that supported drivers can use it to report link's tx power. Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Link: https://patch.msgid.link/20241125083217.216095-3-quic_ramess@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-13Merge tag 'wireless-next-2024-11-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.13 Most likely the last -next pull request for v6.13. Most changes are in Realtek and Qualcomm drivers, otherwise not really anything noteworthy. Major changes: mac80211 * EHT 1024 aggregation size for transmissions ath12k * switch to using wiphy_lock() and remove ar->conf_mutex * firmware coredump collection support * add debugfs support for a multitude of statistics ath11k * dt: document WCN6855 hardware inputs ath9k * remove include/linux/ath9k_platform.h ath5k * Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support rtw88: * 8821au and 8812au USB adapters support rtw89 * thermal protection * firmware secure boot for WiFi 6 chip * tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits) Revert "wifi: iwlegacy: do not skip frames with bad FCS" wifi: mac80211: pass MBSSID config by reference wifi: mac80211: Support EHT 1024 aggregation size in TX net: rfkill: gpio: Add check for clk_enable() wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() wifi: Switch back to struct platform_driver::remove() wifi: ipw2x00: libipw_rx_any(): fix bad alignment wifi: brcmfmac: release 'root' node in all execution paths wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA wifi: iwlwifi: bump minimum API version in BZ/SC to 92 wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h wifi: iwlwifi: be less noisy if the NIC is dead in S3 wifi: iwlwifi: mvm: tell iwlmei when we finished suspending wifi: iwlwifi: allow fast resume on ax200 wifi: iwlwifi: mvm: support new initiator and responder command version wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency wifi: iwlwifi: mvm: MLO scan upon channel condition degradation wifi: iwlwifi: mvm: support new versions of the wowlan APIs wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif() ... ==================== Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11wifi: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/net/wireless to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. En passant several whitespace changes are done to make indentation consistent in the struct initializers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241106170706.38922-2-u.kleine-koenig@baylibre.com
2024-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.12-rc6). Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c cbe84e9ad5e2 ("wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd") 188a1bf89432 ("wifi: mac80211: re-order assigning channel in activate links") https://lore.kernel.org/all/20241028123621.7bbb131b@canb.auug.org.au/ net/mac80211/cfg.c c4382d5ca1af ("wifi: mac80211: update the right link for tx power") 8dd0498983ee ("wifi: mac80211: Fix setting txpower with emulate_chanctx") drivers/net/ethernet/intel/ice/ice_ptp_hw.h 6e58c3310622 ("ice: fix crash on probe for DPLL enabled E810 LOM") e4291b64e118 ("ice: Align E810T GPIO to other products") ebb2693f8fbd ("ice: Read SDP section from NVM for pin definitions") ac532f4f4251 ("ice: Cleanup unused declarations") https://lore.kernel.org/all/20241030120524.1ee1af18@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-25Merge tag 'wireless-2024-10-21' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless wireless fixes for v6.12-rc5 The first set of wireless fixes for v6.12. We have been busy and have not been able to send this earlier, so there are more fixes than usual. The fixes are all over, both in stack and in drivers, but nothing special really standing out.
2024-10-23wifi: mac80211: call rate_control_rate_update() for link STAJohannes Berg
In order to update the right link information, call the update rate_control_rate_update() with the right link_sta, and then pass that through to the driver's sta_rc_update() method. The software rate control still doesn't support it, but that'll be skipped by not having a rate control ref. Since it now operates on a link sta, rename the driver method. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.5851b6b5fd41.Ibdf50d96afa4b761dd9b9dfd54a1147e77a75329@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-09-18wifi: mt76: do not increase mcu skb refcount if retry is not supportedFelix Fietkau
If mcu_skb_prepare_msg is not implemented, incrementing skb refcount does not work for mcu message retry. In some cases (e.g. on SDIO), shared skbs can trigger a BUG_ON, crashing the system. Fix this by only incrementing refcount if retry is actually supported. Fixes: 3688c18b65ae ("wifi: mt76: mt7915: retry mcu messages") Closes: https://lore.kernel.org/r/d907b13a-f8be-4cb8-a0bb-560a21278041@notapiano/ Reported-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> #KernelCI Tested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240917110942.22077-1-nbd@nbd.name
2024-09-09Merge tag 'mt76-for-kvalo-2024-09-06' of https://github.com/nbd168/wirelessKalle Valo
mt76 patches for 6.12 - fixes - mt7915 .sta_state support - mt7915 hardware restart improvements
2024-09-06wifi: mt76: mt7925: replace chan config with extend txpower config for clcMing Yen Hsieh
Since MT792x_CLC_CHAN is currently not in use, we have added an extension for setting txpower to replace it. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20240819015334.14580-2-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7925: fix a potential array-index-out-of-bounds issue for clcMing Yen Hsieh
Due to the lack of checks on the clc array, if the firmware supports more clc configuration, it will cause illegal memory access. Cc: stable@vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20240819015334.14580-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7615: check devm_kasprintf() returned valueMa Ke
devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value. Found by code review. Cc: stable@vger.kernel.org Fixes: 0bb4e9187ea4 ("mt76: mt7615: fix hwmon temp sensor mem use-after-free") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://patch.msgid.link/20240905014753.353271-1-make24@iscas.ac.cn Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7925: convert comma to semicolonChen Ni
Replace comma between expressions with semicolons. Using a ',' in place of a ';' can have unintended side effects. Although that is not the case here, it is seems best to use ';' unless ',' is intended. Found by inspection. No functional change intended. Compile tested only. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://patch.msgid.link/20240904075213.1352976-1-nichen@iscas.ac.cn Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7925: fix a potential association failure upon resumingMichael Lo
In multi-channel scenarios, the granted channel must be aborted before suspending. Otherwise, the firmware will be put into a wrong state, resulting in an association failure after resuming. With this patch, the granted channel will be aborted before suspending if necessary. Cc: stable@vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Michael Lo <michael.lo@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20240902090054.15806-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: Avoid multiple -Wflex-array-member-not-at-end warningsGustavo A. R. Silva
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. So, in order to avoid ending up with a flexible-array member in the middle of multiple other structs, we use the `struct_group_tagged()` helper to create a new tagged `struct mt76_connac2_mcu_rxd_hdr`. This structure groups together all the members of the flexible `struct mt76_connac2_mcu_rxd` except the flexible array. As a result, the array is effectively separated from the rest of the members without modifying the memory layout of the flexible structure. We then change the type of the middle struct members currently causing trouble from `struct mt76_connac2_mcu_rxd` to `struct mt76_connac2_mcu_rxd_hdr`. We also want to ensure that when new members need to be added to the flexible structure, they are always included within the newly created tagged struct. For this, we use `static_assert()`. This ensures that the memory layout for both the flexible structure and the new tagged struct is the same after any changes. This approach avoids having to implement `struct mt76_connac2_mcu_rxd_hdr` as a completely separate structure, thus preventing having to maintain two independent but basically identical structures, closing the door to potential bugs in the future. So, with these changes, fix the following warnings: drivers/net/wireless/mediatek/mt76/mt7915/mcu.h:32:37: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/mediatek/mt76/mt7915/mcu.h:40:37: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/mediatek/mt76/mt7915/mcu.h:49:37: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/mediatek/mt76/mt7915/mcu.h:58:37: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://patch.msgid.link/Zr5KsZugaEXrApQJ@elsanto Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7921: Check devm_kasprintf() returned valueMa Ke
devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value. Found by code review. Cc: stable@vger.kernel.org Fixes: 6ae39b7c7ed4 ("wifi: mt76: mt7921: Support temp sensor") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Reviwed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://patch.msgid.link/20240903014455.4144536-1-make24@iscas.ac.cn Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7915: check devm_kasprintf() returned valueMa Ke
devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value. Found by code review. Cc: stable@vger.kernel.org Fixes: 6ae39b7c7ed4 ("wifi: mt76: mt7921: Support temp sensor") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://patch.msgid.link/20240903014955.4145423-1-make24@iscas.ac.cn Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7915: avoid long MCU command timeouts during SERFelix Fietkau
Immediately abort MCU commands when firmware requests DMA restart. Link: https://patch.msgid.link/20240827093011.18621-24-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7996: fix uninitialized TLV dataFelix Fietkau
Use skb_put_zero instead of skb_put Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Link: https://patch.msgid.link/20240827093011.18621-23-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7915: always query station rx rate from firmwareFelix Fietkau
When offloading is enabled, the software rx path may not have the latest rate information. Link: https://patch.msgid.link/20240827093011.18621-22-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7915: fix rx filter setting for bfee functionalityHoward Hsu
Fix rx filter setting to prevent dropping NDPA frames. Without this change, bfee functionality may behave abnormally. Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Link: https://patch.msgid.link/20240827093011.18621-21-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: shrink mt76_queue_bufFelix Fietkau
Reuse one bit from the length field for skip_unmap Link: https://patch.msgid.link/20240827093011.18621-20-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7915: improve hardware restart reliabilityFelix Fietkau
- use reconfig_complete to restart mac_work / queues - reset full wtbl after firmware init - clear wcid and vif mask to avoid leak - fix sta poll list corruption Link: https://patch.msgid.link/20240827093011.18621-19-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: connac: move mt7615_mcu_del_wtbl_all to connacFelix Fietkau
Preparation for reusing it in mt7915 Link: https://patch.msgid.link/20240827093011.18621-18-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7915: hold dev->mt76.mutex while disabling tx workerFelix Fietkau
Prevent racing against other functions disabling the same worker Link: https://patch.msgid.link/20240827093011.18621-17-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7915: add dummy HW offload of IEEE 802.11 fragmentationBenjamin Lin
Currently, CONNAC2 series do not support encryption for fragmented Tx frames. Therefore, add dummy function mt7915_set_frag_threshold() to prevent SW IEEE 802.11 fragmentation. Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Link: https://patch.msgid.link/20240827093011.18621-16-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7915: reset the device after MCU timeoutFelix Fietkau
On MT7915, MCU hangs do not trigger watchdog interrupts, so they can only be detected through MCU message timeouts. Ensure that the hardware gets restarted when that happens in order to prevent a permanent stuck state. Link: https://patch.msgid.link/20240827093011.18621-15-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7915: retry mcu messagesFelix Fietkau
In some cases MCU messages can get lost. Instead of failing completely, attempt to recover by re-sending them. Link: https://patch.msgid.link/20240827093011.18621-14-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7915: set MT76_MCU_RESET early in mt7915_mac_full_resetFelix Fietkau
This avoids running into unnecessary timeouts waiting for MCU responses Link: https://patch.msgid.link/20240827093011.18621-13-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7915: use mac80211 .sta_state opFelix Fietkau
Allows adding stations before assoc, though they are not passed to the firmware yet at that point. Link: https://patch.msgid.link/20240827093011.18621-12-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: change .sta_assoc callback to .sta_eventFelix Fietkau
Also report auth/disassoc events, in order to give the driver more control over handling the station state. Link: https://patch.msgid.link/20240827093011.18621-11-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: connac: add support for passing connection state directlyFelix Fietkau
Preparation for improvements to sta handling. No functional changes. Link: https://patch.msgid.link/20240827093011.18621-10-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: connac: add support for IEEE 802.11 fragmentationBenjamin Lin
Add fragmentation index into TXD.DW2 to support IEEE 802.11 fragmentation. Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Link: https://patch.msgid.link/20240827093011.18621-9-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7915: allocate vif wcid in the same range as stationsFelix Fietkau
Reduces the amount of unnecessary WTBL bank switching, while still reserving WTBL entries for vifs. Link: https://patch.msgid.link/20240827093011.18621-8-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7915: disable tx worker during tx BA session enable/disableFelix Fietkau
Avoids firmware race condition. Link: https://patch.msgid.link/20240827093011.18621-7-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: add separate tx scheduling queue for off-channel txFelix Fietkau
Ensure that packets are not sent out to the wrong channel Link: https://patch.msgid.link/20240827093011.18621-6-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mac80211: handle ieee80211_radar_detected() for MLOAditya Kumar Singh
Currently DFS works under assumption there could be only one channel context in the hardware. Hence, drivers just calls the function ieee80211_radar_detected() passing the hardware structure. However, with MLO, this obviously will not work since number of channel contexts will be more than one and hence drivers would need to pass the channel information as well on which the radar is detected. Also, when radar is detected in one of the links, other link's CAC should not be cancelled. Hence, in order to support DFS with MLO, do the following changes - * Add channel context conf pointer as an argument to the function ieee80211_radar_detected(). During MLO, drivers would have to pass on which channel context conf radar is detected. Otherwise, drivers could just pass NULL. * ieee80211_radar_detected() will iterate over all channel contexts present and * if channel context conf is passed, only mark that as radar detected * if NULL is passed, then mark all channel contexts as radar detected * Then as usual, schedule the radar detected work. * In the worker, go over all the contexts again and for all such context which is marked with radar detected, cancel the ongoing CAC by calling ieee80211_dfs_cac_cancel() and then notify cfg80211 via cfg80211_radar_event(). * To cancel the CAC, pass the channel context as well where radar is detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is canceled only on the links using the provided context, leaving other links unaffected. This would also help in scenarios where there is split phy 5 GHz radio, which is capable of DFS channels in both lower and upper band. In this case, simultaneous radars can be detected. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: mt76: partially move channel change code to coreFelix Fietkau
This allows the core code to change the channel. Code deduplication and preparation for adding scanning code to the core. Link: https://patch.msgid.link/20240828063422.44813-1-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: fix mt76_get_rateFelix Fietkau
Do not assume that the first phy has 2 GHz support. Check sband->band instead of accessing dev->phy.sband_2g. Link: https://patch.msgid.link/20240827093011.18621-4-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7603: initialize chainmaskFelix Fietkau
Fixes reported tx power by accounting for the combined output Link: https://patch.msgid.link/20240827093011.18621-3-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: mt7603: fix reading target power from eepromFelix Fietkau
If the ext-PA target power is unset, fall back to the standard EEPROM value. Link: https://patch.msgid.link/20240827093011.18621-2-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 15:49:55 +0000