summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek
AgeCommit message (Collapse)Author
2023-07-06wifi: mt76: mt7921e: fix init command fail with enabled deviceQuan Zhou
For some cases as below, we may encounter the unpreditable chip stats in driver probe() * The system reboot flow do not work properly, such as kernel oops while rebooting, and then the driver do not go back to default status at this moment. * Similar to the flow above. If the device was enabled in BIOS or UEFI, the system may switch to Linux without driver fully shutdown. To avoid the problem, force push the device back to default in probe() * mt7921e_mcu_fw_pmctrl() : return control privilege to chip side. * mt7921_wfsys_reset() : cleanup chip config before resource init. Error log [59007.600714] mt7921e 0000:02:00.0: ASIC revision: 79220010 [59010.889773] mt7921e 0000:02:00.0: Message 00000010 (seq 1) timeout [59010.889786] mt7921e 0000:02:00.0: Failed to get patch semaphore [59014.217839] mt7921e 0000:02:00.0: Message 00000010 (seq 2) timeout [59014.217852] mt7921e 0000:02:00.0: Failed to get patch semaphore [59017.545880] mt7921e 0000:02:00.0: Message 00000010 (seq 3) timeout [59017.545893] mt7921e 0000:02:00.0: Failed to get patch semaphore [59020.874086] mt7921e 0000:02:00.0: Message 00000010 (seq 4) timeout [59020.874099] mt7921e 0000:02:00.0: Failed to get patch semaphore [59024.202019] mt7921e 0000:02:00.0: Message 00000010 (seq 5) timeout [59024.202033] mt7921e 0000:02:00.0: Failed to get patch semaphore [59027.530082] mt7921e 0000:02:00.0: Message 00000010 (seq 6) timeout [59027.530096] mt7921e 0000:02:00.0: Failed to get patch semaphore [59030.857888] mt7921e 0000:02:00.0: Message 00000010 (seq 7) timeout [59030.857904] mt7921e 0000:02:00.0: Failed to get patch semaphore [59034.185946] mt7921e 0000:02:00.0: Message 00000010 (seq 8) timeout [59034.185961] mt7921e 0000:02:00.0: Failed to get patch semaphore [59037.514249] mt7921e 0000:02:00.0: Message 00000010 (seq 9) timeout [59037.514262] mt7921e 0000:02:00.0: Failed to get patch semaphore [59040.842362] mt7921e 0000:02:00.0: Message 00000010 (seq 10) timeout [59040.842375] mt7921e 0000:02:00.0: Failed to get patch semaphore [59040.923845] mt7921e 0000:02:00.0: hardware init failed Cc: stable@vger.kernel.org Fixes: 5c14a5f944b9 ("mt76: mt7921: introduce mt7921e support") Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Juan Martinez <juan.martinez@amd.com> Co-developed-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Message-ID: <39fcb7cee08d4ab940d38d82f21897483212483f.1688569385.git.deren.wu@mediatek.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15wifi: mt7601u: replace strlcpy() with strscpy()Azeem Shaikh
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). Direct replacement is safe here since DEV_ASSIGN is only used by TRACE macros and the return values are ignored. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230613003458.3538812-1-azeemshaikh38@gmail.com
2023-06-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/sched/sch_taprio.c d636fc5dd692 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping") dced11ef84fb ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()") net/ipv4/sysctl_net_ipv4.c e209fee4118f ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294") ccce324dabfe ("tcp: make the first N SYN RTO backoffs linear") https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-01wifi: mt76: mt7996: fix possible NULL pointer dereference in ↵Lorenzo Bianconi
mt7996_mac_write_txwi() Fix possible NULL pointer dereference on mvif pointer in mt7996_mac_write_txwi routine. Fixes: 15ee62e73705 ("wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/2637628a84f42ad6d7b774e706f041d5b45c8cb5.1685269638.git.lorenzo@kernel.org
2023-05-27wifi: mt76: mt7615: fix possible race in mt7615_mac_sta_pollLorenzo Bianconi
Grab sta_poll_lock spinlock in mt7615_mac_sta_poll routine in order to avoid possible races with mt7615_mac_add_txs() or mt7615_mac_fill_rx() removing msta pointer from sta_poll_list. Fixes: a621372a04ac ("mt76: mt7615: rework mt7615_mac_sta_poll for usb code") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/48b23404b759de4f1db2ef85975c72a4aeb1097c.1684938695.git.lorenzo@kernel.org
2023-05-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/freescale/fec_main.c 6ead9c98cafc ("net: fec: remove the xdp_return_frame when lack of tx BDs") 144470c88c5d ("net: fec: using the standard return codes when xdp xmit errors") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-12wifi: mt76: connac: fix stats->tx_bytes calculationRyder Lee
The stats->tx_bytes shall subtract retry byte from tx byte. Fixes: 43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/b3cd45596943cf5a06b2e08e2fe732ab0b51311b.1682285873.git.ryder.lee@mediatek.com
2023-05-12wifi: mt76: mt7996: fix endianness of MT_TXD6_TX_RATERyder Lee
To avoid sparse warning: sparse: warning: invalid assignment: |= sparse: left side has type restricted __le32 sparse: right side has type unsigned lon Fixes: 15ee62e73705 ("wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES support") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/16fa938373e3b145cb07a2c98d2428fea2abadba.1682285873.git.ryder.lee@mediatek.com
2023-05-05wifi: mt7601u: delete dead code checking debugfs returnsWang Jikai
Smatch reports that: drivers/net/wireless/mediatek/mt7601u/debugfs.c:130 mt7601u_init_debugfs() warn: 'dir' is an error pointer or valid". Debugfs code is not supposed to need error checking so instead of changing this to if (IS_ERR()) the correct thing is to just delete the dead code. Signed-off-by: Wang Jikai <wangjikai@hust.edu.cn> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421092200.24456-1-wangjikai@hust.edu.cn
2023-04-21Merge tag 'wireless-next-2023-04-21' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.4 Most likely the last -next pull request for v6.4. We have changes all over. rtw88 now supports SDIO bus and iwlwifi continues to work on Wi-Fi 7 support. Not much stack changes this time. Major changes: cfg80211/mac80211 - fix some Fine Time Measurement (FTM) frames not being bufferable - flush frames before key removal to avoid potential unencrypted transmission depending on the hardware design iwlwifi - preparation for Wi-Fi 7 EHT and multi-link support rtw88 - SDIO bus support - RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support rtw89 - framework firmware backwards compatibility brcmfmac - Cypress 43439 SDIO support mt76 - mt7921 P2P support - mt7996 mesh A-MSDU support - mt7996 EHT support - mt7996 coredump support wcn36xx - support for pronto v3 hardware ath11k - PCIe DeviceTree bindings - WCN6750: enable SAR support ath10k - convert DeviceTree bindings to YAML * tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits) wifi: rtw88: Update spelling in main.h wifi: airo: remove ISA_DMA_API dependency wifi: rtl8xxxu: Simplify setting the initial gain wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear} wifi: rtl8xxxu: Don't print the vendor/product/serial wifi: rtw88: Fix memory leak in rtw88_usb wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant wifi: rtw88: set pkg_type correctly for specific rtw8821c variants wifi: rtw88: rtw8821c: Fix rfe_option field width wifi: rtw88: usb: fix priority queue to endpoint mapping wifi: rtw88: 8822c: add iface combination wifi: rtw88: handle station mode concurrent scan with AP mode wifi: rtw88: prevent scan abort with other VIFs wifi: rtw88: refine reserved page flow for AP mode wifi: rtw88: disallow PS during AP mode wifi: rtw88: 8822c: extend reserved page number wifi: rtw88: add port switch for AP mode wifi: rtw88: add bitmap for dynamic port settings wifi: rtw89: mac: use regular int as return type of DLE buffer request wifi: mac80211: remove return value check of debugfs_create_dir() ... ==================== Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19wifi: mt76: mt7996: fill txd by host driverRyder Lee
The hardware SDO has issue to fill txd for the moment, so fallback to driver filling method. Fixes: 98686cd21624 (wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices) Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: set NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 on supported driversFelix Fietkau
Drivers that do not generate IV/PN in software can safely rekey PTK0 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: dma: use napi_build_skbFelix Fietkau
Improves performance by using bulk allocation Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7615: increase eeprom size for mt7663Felix Fietkau
mt7663 efuse has 0x600 bytes instead of 0x400. Increase the size in order to fix issues with incomplete calibration data Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable mesh HW amsdu/de-amsdu supportRyder Lee
This enables HW offloading amsdu/de-amsdu support for 802.11s mesh interface. Co-developed-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable configured beacon tx rateRyder Lee
The user is allowed to change beacon tx rate (HT/VHT/HE) from hostapd. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable BSS_CHANGED_MCAST_RATE supportRyder Lee
Similar to BSS_CHANGED_BASIC_RATES, this enables mcast rate configuration through fixed rate tables. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Change-Id: Ifc305e8c7de9a7df4ad5f856e2097d721a886aaa Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES supportRyder Lee
The connac3 removes fixed rate fields to reduce txd size and introduces global rate tables (64 entries) for rate setting. Driver needs to fill the corresponding idx in MT_TXD6_TX_RATE while tx, and push mt76_rate into predifined table at bootup stage so that mvif->basic_rates_idx can immediately switch out once setting changes. spe_idx is also needed for fixed rate frames, and will be updated by future patches. Note that all table entries are shared across driver and firmware (i.e.TxBF), hence adding MT7996_BASIC_RATES_TBL to reflect mapping status. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: connac: add nss calculation into mt76_connac2_mac_tx_rate_val()Ryder Lee
Take nss calculation into account since this function always wrongly returns 0. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: connac: fix txd multicast rate settingRyder Lee
The vif->bss_conf.mcast_rate should be applied to multicast data frame only. Fixes: 182071cdd594 ("mt76: connac: move connac2_mac_write_txwi in mt76_connac module") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921e: stop chip reset worker in unregister hookQuan Zhou
If the chip reset worker is triggered during the remove process, the chip DMA may not be properly pushed back to the idle state. This can lead to corruption of the DMA flow due to the chip reset. Therefore, it is necessary to stop the chip reset before the DMA is finalized. To avoid resetting the chip after the reset worker is cancelled, use __mt7921_mcu_drv_pmctrl() instead of mt7921_mcu_drv_pmctrl(). It is safe to ignore the pm mutex because the pm worker and wake worker have already been cancelled. Fixes: 033ae79b3830 ("mt76: mt7921: refactor init.c to be bus independent") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Co-developed-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921e: improve reliability of dma resetQuan Zhou
The hardware team has advised the driver that it is necessary to first put WFDMA into an idle state before resetting the WFDMA. Otherwise, the WFDMA may enter an unknown state where it cannot be polled with the right state successfully. To ensure that the DMA can work properly while a stressful cold reboot test was being made, we have reordered the programming sequence in the driver based on the hardware team's guidance. The patch would modify the WFDMA disabling flow from "DMA reset -> disabling DMASHDL -> disabling WFDMA -> polling and waiting until DMA idle" to "disabling WFDMA -> polling and waiting for DMA idle -> disabling DMASHDL -> DMA reset. Where he polling and waiting until WFDMA is idle is coordinated with the operation of disabling WFDMA. Even while WFDMA is being disabled, it can still handle Tx/Rx requests. The additional polling allows sufficient time for WFDMA to process the last T/Rx request. When the idle state of WFDMA is reached, it is a reliable indication that DMASHDL is also idle to ensure it is safe to disable it and perform the DMA reset. Fixes: 0a1059d0f060 ("mt76: mt7921: move mt7921_dma_reset in dma.c") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Co-developed-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: fix missing unwind goto in `mt7921u_probe`Jiefeng Li
`mt7921u_dma_init` can only return zero or negative number according to its definition. When it returns non-zero number, there exists an error and this function should handle this error rather than return directly. Fixes: 0d2afe09fad5 ("mt76: mt7921: add mt7921u driver") Signed-off-by: Jiefeng Li <jiefeng_li@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17mt76: mt7921: fix kernel panic by accessing unallocated eeprom.dataSean Wang
The MT7921 driver no longer uses eeprom.data, but the relevant code has not been removed completely since commit 16d98b548365 ("mt76: mt7921: rely on mcu_get_nic_capability"). This could result in potential invalid memory access. To fix the kernel panic issue in mt7921, it is necessary to avoid accessing unallocated eeprom.data which can lead to invalid memory access. Furthermore, it is possible to entirely eliminate the mt7921_mcu_parse_eeprom function and solely depend on mt7921_mcu_parse_response to divide the RxD header. [2.702735] BUG: kernel NULL pointer dereference, address: 0000000000000550 [2.702740] #PF: supervisor write access in kernel mode [2.702741] #PF: error_code(0x0002) - not-present page [2.702743] PGD 0 P4D 0 [2.702747] Oops: 0002 [#1] PREEMPT SMP NOPTI [2.702755] RIP: 0010:mt7921_mcu_parse_response+0x147/0x170 [mt7921_common] [2.702758] RSP: 0018:ffffae7c00fef828 EFLAGS: 00010286 [2.702760] RAX: ffffa367f57be024 RBX: ffffa367cc7bf500 RCX: 0000000000000000 [2.702762] RDX: 0000000000000550 RSI: 0000000000000000 RDI: ffffa367cc7bf500 [2.702763] RBP: ffffae7c00fef840 R08: ffffa367cb167000 R09: 0000000000000005 [2.702764] R10: 0000000000000000 R11: ffffffffc04702e4 R12: ffffa367e8329f40 [2.702766] R13: 0000000000000000 R14: 0000000000000001 R15: ffffa367e8329f40 [2.702768] FS: 000079ee6cf20c40(0000) GS:ffffa36b2f940000(0000) knlGS:0000000000000000 [2.702769] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2.702775] CR2: 0000000000000550 CR3: 00000001233c6004 CR4: 0000000000770ee0 [2.702776] PKRU: 55555554 [2.702777] Call Trace: [2.702782] mt76_mcu_skb_send_and_get_msg+0xc3/0x11e [mt76 <HASH:1bc4 5>] [2.702785] mt7921_run_firmware+0x241/0x853 [mt7921_common <HASH:6a2f 6>] [2.702789] mt7921e_mcu_init+0x2b/0x56 [mt7921e <HASH:d290 7>] [2.702792] mt7921_register_device+0x2eb/0x5a5 [mt7921_common <HASH:6a2f 6>] [2.702795] ? mt7921_irq_tasklet+0x1d4/0x1d4 [mt7921e <HASH:d290 7>] [2.702797] mt7921_pci_probe+0x2d6/0x319 [mt7921e <HASH:d290 7>] [2.702799] pci_device_probe+0x9f/0x12a Fixes: 16d98b548365 ("mt76: mt7921: rely on mcu_get_nic_capability") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: move mcu_uni_event and mcu_reg_event in common codeLorenzo Bianconi
mcu_uni_event and mcu_reg_event structs are shared between mt7921 and mt7615 drivers, so move them in connac lib. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: enable coredump supportRyder Lee
Host triggered and catastrophic event triggered firmware core dumping for basic firmware issues triage, including state reporting, function calltrace and MCU memory dump. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: add full system reset knobs into debugfsRyder Lee
Add testing points into debugfs to trigger firmware assert and enable full system recovery. Also rename knob "fw_ser" to a clear-cut name "sys_recovery". Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: enable full system reset supportBo Jiao
Add mt7996_reset() and refactor mt7996_mac_reset_work() to support full system recovery. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: enable p2p supportSean Wang
Introduce p2p-go/p2p-client support to mt7921 driver CONNECTION_P2P_GC/GO is not supported with the current firmware so we added mt76_dev to mt76_connac_mcu_sta_basic_tlv signature to use CONNECTION_INFRA_STA/AP instead for p2p-client and p2p-go respectively to make it work. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: Replace fake flex-arrays with flexible-array membersGustavo A. R. Silva
Zero-length arrays as fake flexible arrays are deprecated and we are moving towards adopting C99 flexible-array members instead. Address the following warnings found with GCC-13 and -fstrict-flex-arrays=3 enabled: drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:266:25: warning: array subscript 0 is outside array bounds of ‘struct mt7921_asar_dyn_limit_v2[0]’ [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:263:25: warning: array subscript 0 is outside array bounds of ‘struct mt7921_asar_dyn_limit[0]’ [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:223:28: warning: array subscript <unknown> is outside array bounds of ‘struct mt7921_asar_geo_limit_v2[0]’ [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:220:28: warning: array subscript <unknown> is outside array bounds of ‘struct mt7921_asar_geo_limit[0]’ [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:334:37: warning: array subscript i is outside array bounds of ‘u8[0]’ {aka ‘unsigned char[]’} [-Warray-bounds=] Notice that the DECLARE_FLEX_ARRAY() helper allows for flexible-array members in unions. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/21 Link: https://github.com/KSPP/linux/issues/272 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: Replace zero-length array with flexible-array memberGustavo A. R. Silva
Zero-length arrays are deprecated [1] and have to be replaced by C99 flexible-array members. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help to make progress towards globally enabling -fstrict-flex-arrays=3 [2] Link: https://github.com/KSPP/linux/issues/78 [1] Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [2] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: add Netgear AXE3000 (A8000) supportReese Russell
Issue: Though the Netgear AXE3000 (A8000) is based on the mt7921 chipset because of the unique USB VID:PID combination this device does not initialize/register. Thus making it not plug and play. Fix: Adds support for the Netgear AXE3000 (A8000) based on the Mediatek mt7921au chipset. The method of action is adding the USD VID/PID pair to the mt7921u_device_table[] array. Notes: A retail sample of the Netgear AXE3000 (A8000) yeilds the following from lsusb D 0846:9060 NetGear, Inc. Wireless_Device. This pair 0846:9060 VID:PID has been reported by other users on Github. Signed-off-by: Reese Russell <git@qrsnap.io> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7915: drop redundant prefix of mt7915_txpower_puts()Ryder Lee
Just a cosmetic patch to drop redundant prefix for txpower ouput text. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: fix 6GHz high channel not be scannedMing Yen Hsieh
mt76 scan command only support 64 channels currently. If the channel count is larger than 64(for 2+5+6GHz), some channels will not be scanned. Hence change the scan type to full channel scan in case of the command cannot include proper list for chip. Fixes: 399090ef9605 ("mt76: mt76_connac: move hw_scan and sched_scan routine in mt76_connac_mcu module") Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Isaac Konikoff <konikofi@candelatech.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921e: fix probe timeout after rebootQuan Zhou
In system warm reboot scene, due to the polling timeout(now 1000us) is too short to wait dma idle in time, it may make driver probe fail with error code -ETIMEDOUT. Meanwhile, we also found the dma may take around 70ms to enter idle state. Change the polling idle timeout to 100ms to avoid the probabilistic probe fail. Tested pass with 5000 times warm reboot on x86 platform. [4.477496] pci 0000:01:00.0: attach allowed to drvr mt7921e [internal device] [4.478306] mt7921e 0000:01:00.0: ASIC revision: 79610010 [4.480063] mt7921e: probe of 0000:01:00.0 failed with error -110 Fixes: 0a1059d0f060 ("mt76: mt7921: move mt7921_dma_reset in dma.c") Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: move shared mac definitions in mt76_connac2_mac.hLorenzo Bianconi
Move some mac shared definitions between mt7996, mt7921 and mt7915 in mt76_connac2_mac.h. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: get rid of eeprom.hLorenzo Bianconi
eeprom.h is mostly empty for mt7921, so get rid of it. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: add mt76_connac_gen_ppe_thresh utility routineLorenzo Bianconi
gen_ppe_thresh routine is shared between mt7615, mt7915, mt7921 and mt7996 so move it in mt76_connac module. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: get rid of unused sta_ps callbacksLorenzo Bianconi
sta_ps callback is just an empty stub for most of the drivers, so get rid of them. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: add mt76_connac_irq_enable utility routineLorenzo Bianconi
Most of connac based drivers (mt7921, mt7615, mt7663) share the same code to enable interrupts. Move it in mt76_connac module. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: move irq_tasklet in mt76_dev structLorenzo Bianconi
irq_tasklet struct is used by most of the drivers (e.g. mt7915, mt7921, mt7615, mt7663 and mt7996) so move it in common code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921e: Set memory space enable in PCI_COMMAND if unsetMario Limonciello
When the BIOS has been configured for Fast Boot, systems with mt7921e have non-functional wifi. Turning on Fast boot caused both bus master enable and memory space enable bits in PCI_COMMAND not to get configured. The mt7921 driver already sets bus master enable, but explicitly check and set memory access enable as well to fix this problem. Tested-by: Anson Tsao <anson.tsao@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: use driver flags rather than mac80211 flags to mcuNeil Chen
FIF_* flags from mac80211 is not ABI. mt7921 should not pass it into mcu directly. Remap FIF_* to driver defined flags as mcu command input. Fixes: c222f77fd421 ("wifi: mt76: mt7921: fix rx filter incorrect by drv/fw inconsistent") Signed-off-by: Neil Chen <yn.chen@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: introduce mt7921_get_mac80211_ops utility routineLorenzo Bianconi
Since the fw offload capability check is shared between pci,usb and sdio devices, move it in common init code and reduce code duplication. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: fix eeprom tx path bitfieldsStanleyYP Wang
Swap the tx path bitfields of band1 and band2 to read correct setting. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: remove mt7996_mcu_set_pm()Peter Chiu
Currently using BSS_INFO_PS command will sometimes cause packet drop in hw rx queue. Temporarily remove this function until finding the cause. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: init mpdu density capPeter Chiu
Init mpdu density based on the hardware capability to prevent rx drop. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: fix pointer calculation in ie countdown eventPeter Chiu
Fix the tail and data pointers. The rxd->len in mt7996_mcu_rxd does not include the length of general rxd. It only includes the length of firmware event rxd. Use skb->length to get the correct length. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: remove unused eeprom band selectionShayne Chen
Tri-band chipsets support one band on each a-die, so remove the unused definition of eeprom band selection. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: let non-bufferable MMPDUs use correct hw queueShayne Chen
Pass qid into mt7996_mac_write_txwi() to let the tx descriptor of non-bufferable MMPDUs be filled with correct hw queue index. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 23:02:10 +0000