summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek
AgeCommit message (Collapse)Author
2022-07-11mt76: mt7921: do not update pm states in case of errorLorenzo Bianconi
Do not update pm stats if mt7921e_mcu_fw_pmctrl routine returns an error. Fixes: 36873246f78a2 ("mt76: mt7921: add awake and doze time accounting") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7615: do not update pm stats in case of errorLorenzo Bianconi
Do not update pm stats if mt7615_mcu_fw_pmctrl returns an error. Fixes: abe912ae3cd42 ("mt76: mt7663: add awake and doze time accounting") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921s: remove unnecessary goto in mt7921s_mcu_drv_pmctrlLorenzo Bianconi
Get rid of unnecessary goto in mt7921s_mcu_drv_pmctrl routine. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: connac: move mt76_connac2_mac_fill_rx_rate in connac moduleLorenzo Bianconi
Rely on mt76_connac2_mac_fill_rx_rate routine in mt7921 driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: connac: move mt76_connac2_reverse_frag0_hdr_trans in mt76-connac moduleLorenzo Bianconi
mt76_connac2_reverse_frag0_hdr_trans routine is shared between mt7921 and mt7915e drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: connac: move HE radiotap parsing in connac moduleLorenzo Bianconi
HE radiotap parsing code is shared between connac2 devices. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: fix command timeout in AP stop periodDeren Wu
Due to AP stop improperly, mt7921 driver would face random command timeout by chip fw problem. Migrate AP start/stop process to .start_ap/.stop_ap and congiure BSS network settings in both hooks. The new flow is shown below. * AP start .start_ap() configure BSS network resource set BSS to connected state .bss_info_changed() enable fw beacon offload * AP stop .bss_info_changed() disable fw beacon offload (skip this command) .stop_ap() set BSS to disconnected state (beacon offload disabled automatically) destroy BSS network resource Fixes: 116c69603b01 ("mt76: mt7921: Add AP mode support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: not support beacon offload disable commandDeren Wu
Beacon disable flow would be handled in bss stop handler automatically. Force return -EOPNOTSUPP in disable case. Fixes: 116c69603b01 ("mt76: mt7921: Add AP mode support") Reviewed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: connac: move mt76_connac2_mac_add_txs_skb in connac moduleLorenzo Bianconi
Move mt76_connac2_mac_add_txs_skb in mt76-connac module since it is shared between connac2 devices (mt7921 and mt7915) Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: connac: move connac2_mac_write_txwi in mt76_connac moduleLorenzo Bianconi
mac_write_txwi code is shared between connac2 devices (mt7915 and mt7921). Move it in connac module. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: connac: move mac connac2 defs in mt76_connac2_mac.hLorenzo Bianconi
This is a preliminary patch to share connac2 mac txwi code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7915: rely on mt76_dev in mt7915_mac_write_txwi signatureLorenzo Bianconi
This is a preliminary patch to share txwi configuration code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: rely on mt76_dev in mt7921_mac_write_txwi signatureLorenzo Bianconi
This is a preliminary patch to share txwi configuration code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: enable the VHT extended NSS BW featureDeren Wu
According IEEE Std 802.11-2020, its definition is: Indicates whether the STA is capable of interpreting the Extended NSS BW Support subfield of the VHT Capabilities Information field. Some APs, such as Xiaomi AX6000, would check this one for BW settings. mt76 driver can get max BW capability only if the this field is confgured properly. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7663: rely on mt76_connac2_fw_trailerLorenzo Bianconi
Remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: connac: move mt76_connac2_load_patch in connac moduleLorenzo Bianconi
Move mt76_connac2_load_patch utility routine in mt76_connac module since it is shared between mt7921 and mt7915. This is a preliminary patch to support mt7902e driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: connac: move mt76_connac2_load_ram in connac moduleLorenzo Bianconi
Move mt76_connac2_load_ram utility routine in mt76_connac module since it is shared between mt7921 and mt7915. This is a preliminary patch to support mt7902e driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: move fw toggle in mt7921_load_firmwareLorenzo Bianconi
Move drv_own/fw_own toggle in mt7921_load_firmware. This change allow to reuse connac code to load patch for mt7921 driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: connac: move shared fw structures in connac moduleLorenzo Bianconi
Move mt76_connac2 fw structures in connac module since they are shared between mt7921 and mt7915 drivers. This is a preliminary patch to add mt7902e support. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: get rid of mt7921_mcu_exitLorenzo Bianconi
Run skb_queue_purge when needed. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: add missing bh-disable around rx napi scheduleLorenzo Bianconi
napi_schedule() can call __raise_softirq_irqoff(), which can perform softirq handling, so it must not be called in a pure process context with BH enabled. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7615: add missing bh-disable around rx napi scheduleFelix Fietkau
napi_schedule() can call __raise_softirq_irqoff(), which can perform softirq handling, so it must not be called in a pure process context with BH enabled. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7915: add missing bh-disable around tx napi enable/scheduleFelix Fietkau
napi_schedule() can call __raise_softirq_irqoff(), which can perform softirq handling, so it must not be called in a pure process context with BH enabled. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921s: fix firmware download random failYN Chen
To avoid racing problems in chip, mt7921s should reacquire drv-own after firmware semaphore is released. Fixes: 78b217580c509 ("mt76: mt7921s: fix bus hang with wrong privilege") Signed-off-by: YN Chen <yn.chen@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: add PATCH_FINISH_REQ cmd response handlingYN Chen
add new case to fetch the return value of PATCH_FINISH_REQ Signed-off-by: YN Chen <yn.chen@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: add DBDC rxq handlings into mac_reset_workRyder Lee
Enable/disable rx napi for DBDC. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7915: add more ethtool statsRyder Lee
Add channel time and MAC ready stats. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: introduce ACPI SAR config in tx powerDeren Wu
Add new function mt7921_set_tx_sar_pwr() to update SAR power from .set_sar_specs and ACPI setting. Both settings would be merged into mt76_freq_range_power for final tx power value. Reviewed-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7921: introduce ACPI SAR supportDeren Wu
In ACPI SAR enabled device, mt7921 should read power limit in ACPI config. The limit value would be applied to regular tx power settings in mt76. Two major functionalities added: 1. Get SAR power table through ACPI. 2. Read power in Dynamic/Geo SAR table for tx power limit. Table note MTDS: Dynamic SAR table MTGS: Geo SAR table MTCL: Country List table (for 6GHz support) Reviewed-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: add 6 GHz band support in mt76_sar_freq_rangesDeren Wu
Add new frequencies support in mt76_sar_freq_ranges[] * 5945 - 6165 * 6165 - 6405 * 6405 - 6525 * 6525 - 6705 * 6705 - 6865 * 6865 - 7125 Reviewed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7915: fix endian bug in mt7915_rf_regval_set()Dan Carpenter
This code is supposed to set a u32 value, but casting will not work on big endian systems. Fixes: 0a17329ae9c1 ("mt76: mt7915: add debugfs knob for RF registers read/write") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt76x02u: fix possible memory leak in __mt76x02u_mcu_send_msgLorenzo Bianconi
Free the skb if mt76u_bulk_msg fails in __mt76x02u_mcu_send_msg routine. Fixes: 4c89ff2c74e39 ("mt76: split __mt76u_mcu_send_msg and mt76u_mcu_send_msg routines") Co-developed-by: Gergo Koteles <soyer@irl.hu> Signed-off-by: Gergo Koteles <soyer@irl.hu> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-07-11mt76: mt7915: fix endianness in mt7915_rf_regval_getLorenzo Bianconi
Fix the following sparse warning in mt7915_rf_regval_get routine: drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c:979:16: warning: cast to restricted __le32 Fixes: 0a17329ae9c1f ("mt76: mt7915: add debugfs knob for RF registers read/write") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-06-20wifi: mac80211: return a beacon for a specific linkShaul Triebitz
Pass the link id through to the get_beacon and return the beacon for a specific link id. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: split bss_info_changed methodJohannes Berg
Split the bss_info_changed method to vif_cfg_changed and link_info_changed, with the latter getting a link ID. Also change the 'changed' parameter to u64 already, we know we need that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move interface config to new structJohannes Berg
We'll use bss_conf for per-link configuration later, so move out all the non-link-specific data out into a new struct ieee80211_vif_cfg used in the vif. Some adjustments were done with the following spatch: @@ expression sdata; struct ieee80211_vif *vifp; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ ( -sdata->vif.bss_conf.var +sdata->vif.cfg.var | -vifp->bss_conf.var +vifp->cfg.var ) @bss_conf@ struct ieee80211_bss_conf *bss_conf; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ -bss_conf->var +vif_cfg->var (though more manual fixups were needed, e.g. replacing "vif_cfg->" by "vif->cfg." in many files.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move some future per-link data to bss_confJohannes Berg
To add MLD, reuse the bss_conf structure later for per-link information, so move some things into it that are per link. Most transformations were done with the following spatch: @@ expression sdata; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -sdata->vif.var +sdata->vif.bss_conf.var @@ struct ieee80211_vif *vif; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -vif->var +vif->bss_conf.var Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-03Merge tag 'usb-5.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...
2022-05-16Merge tag 'mt76-for-kvalo-2022-05-12' of https://github.com/nbd168/wirelessKalle Valo
mt76 patches for 5.19 - tx locking improvements - wireless ethernet dispatch support for flow offload - non-standard VHT MCS10-11 support - fixes - runtime PM improvements - mt7921 AP mode support - mt7921 ipv6 NS offload support
2022-05-16mac80211: extend current rate control tx status APIJonas Jelonek
This patch adds the new struct ieee80211_rate_status and replaces 'struct rate_info *rate' in ieee80211_tx_status with pointer and length annotation. The struct ieee80211_rate_status allows to: (1) receive tx power status feedback for transmit power control (TPC) per packet or packet retry (2) dynamic mapping of wifi chip specific multi-rate retry (mrr) chains with different lengths (3) increase the limit of annotatable rate indices to support IEEE802.11ac rate sets and beyond ieee80211_tx_info, control and status buffer, and ieee80211_tx_rate cannot be used to achieve these goals due to fixed size limitations. Our new struct contains a struct rate_info to annotate the rate that was used, retry count of the rate and tx power. It is intended for all information related to RC and TPC that needs to be passed from driver to mac80211 and its RC/TPC algorithms like Minstrel_HT. It corresponds to one stage in an mrr. Multiple subsequent instances of this struct can be included in struct ieee80211_tx_status via a pointer and a length variable. Those instances can be allocated on-stack. The former reference to a single instance of struct rate_info is replaced with our new annotation. An extension is introduced to struct ieee80211_hw. There are two new members called 'tx_power_levels' and 'max_txpwr_levels_idx' acting as a tx power level table. When a wifi device is registered, the driver shall supply all supported power levels in this list. This allows to support several quirks like differing power steps in power level ranges or alike. TPC can use this for algorithm and thus be designed more abstract instead of handling all possible step widths individually. Further mandatory changes in status.c, mt76 and ath11k drivers due to the removal of 'struct rate_info *rate' are also included. status.c already uses the information in ieee80211_tx_status->rate in radiotap, this is now changed to use ieee80211_rate_status->rate_idx. mt76 driver already uses struct rate_info to pass the tx rate to status path. The new members of the ieee80211_tx_status are set to NULL and 0 because the previously passed rate is not relevant to rate control and accurate information is passed via tx_info->status.rates. For ath11k, the txrate can be passed via this struct because ath11k uses firmware RC and thus the information does not interfere with software RC. Compile-Tested: current wireless-next tree with all flags on Tested-on: Xiaomi 4A Gigabit (MediaTek MT7603E, MT7612E) with OpenWrt Linux 5.10.113 Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com> Link: https://lore.kernel.org/r/20220509173958.1398201-2-jelonek.jonas@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-13mt76: mt7921: add ipv6 NS offload supportDeren Wu
Add ipv6 NS offload for WoWLAN state. Tested in this way: 1. Put device-A into WoW state. 2. ping6 from device-B to device-A. 3. In sniffer, see Neighbour advertisement from device-A. Reviewed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: add gfp to mt76_mcu_msg_alloc signatureLorenzo Bianconi
Introduce __mt76_mcu_msg_alloc utility routine in order to specify gfp flags for mcu message allocation. Acked-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: add more statistics from fw_util debugfs knobsRyder Lee
Print out exception state and program counters of WA/WM MCUs. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: improve error handling for fw_debug knobsRyder Lee
In case fw.debug_wm/wa might be unavailable. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7615/mt7915: do reset_work with mt76's work queueBo Jiao
reset_work may be blocked when mcu message timeout occurs Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: add support for 6G in-band discoveryMeiChia Chiu
Add offloading FILS discovery and unsolicited broadcast probe response support. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: add Wireless Ethernet Dispatch supportFelix Fietkau
This is used to support hardware flow offloading from Ethernet to WLAN Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: make number of tokens configurable dynamicallyFelix Fietkau
Preparation for adding Wireless Ethernet Dispatch support Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: add support for overriding the device used for DMA mappingFelix Fietkau
WED support requires using non-coherent DMA, whereas the PCI device might be configured for coherent DMA. The WED driver will take care of changing the PCI HIF coherent IO setting on attach. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: dma: add wrapper macro for accessing queue registersFelix Fietkau
Preparation for adding indirection used for Wireless Ethernet Dispatch support Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 10:51:49 +0000