summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt76x0
AgeCommit message (Collapse)Author
2020-09-24mt76: mt76x0: Move tables used only by init.c to their own header fileLee Jones
Taking the same approach as initvals_phy.h. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:218:35: warning: ‘mt76x0_dcoc_tab’ defined but not used [-Wunused-const-variable=] 218 | static const struct mt76_reg_pair mt76x0_dcoc_tab[] = { | ^~~~~~~~~~~~~~~ drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:86:35: warning: ‘mt76x0_bbp_init_tab’ defined but not used [-Wunused-const-variable=] 86 | static const struct mt76_reg_pair mt76x0_bbp_init_tab[] = { | ^~~~~~~~~~~~~~~~~~~ drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:48:35: warning: ‘mt76x0_mac_reg_table’ defined but not used [-Wunused-const-variable=] 48 | static const struct mt76_reg_pair mt76x0_mac_reg_table[] = { | ^~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:14:35: warning: ‘common_mac_reg_table’ defined but not used [-Wunused-const-variable=] 14 | static const struct mt76_reg_pair common_mac_reg_table[] = { | ^~~~~~~~~~~~~~~~~~~~ Cc: Felix Fietkau <nbd@nbd.name> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Stanislaw Gruszka <stf_xl@wp.pl> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: convert from tx tasklet to tx worker threadFelix Fietkau
This improves performance by allowing the scheduler to move the tx scheduling work to idle CPUs. Since tx scheduling work is very latency sensitive and kept short via AQL, sched_set_fifo_low is used to keep worker priority above normal tasks Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: set interrupt mask register to 0 before requesting irqFelix Fietkau
Avoids spurious interrupts in case the hardware was running already Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: move mt76 workqueue in common codeLorenzo Bianconi
Move mt76 workqueue from usb to common code in order to be reused adding low-power support for mt7663 chipset Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76x0: enable MCS 8 and MCS9Lorenzo Bianconi
Enable MCS8 and MCS9 for mt76x0{u,e} devices Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76x0: pci: add mt7610 PCI IDPawel Dembicki
Add mt7610 PCI id found on D-Link DWR-960 to pci_device_id table. Run-tested on D-Link DWR-960 with no-name half-size mPCIE card with mt7610e. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76x02: fix handling MCU timeouts during hw restartFelix Fietkau
If a MCU timeout occurs before a hw restart completes, another hw restart is scheduled, and the station state gets corrupted. To speed up dealing with that, do not issue any MCU commands after the first timeout, and defer handling timeouts until the reset has completed. Also ignore errors in MCU commands during start/config to avoid making user space fail on this condition. If it happens, another restart is scheduled quickly, and that usually recovers the hardware properly. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-03-17mt76: remove variable 'val' set but not usedChen Wandun
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/mediatek/mt76/mt76x0/phy.c: In function mt76x0_phy_rf_init: drivers/net/wireless/mediatek/mt76/mt76x0/phy.c:1158:5: warning: variable val set but not used [-Wunused-but-set-variable] Fixes: 10de7a8b4ab9 ("mt76x0: phy files") Signed-off-by: Chen Wandun <chenwandun@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: avoid extra RCU synchronization on station removalFelix Fietkau
Use sta_pre_rcu_remove callback to clear wcid pointer earlier Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76u: add {read/write}_extended utility routinesLorenzo Bianconi
Introduce extended utility routines to read/write data o usb bus. New devices (e.g. mt7663u) will rely on both upper and lower part of the register address. Add ext parameter to mt76u_init signature in order to reuse the code adding mt7663u support. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76u: move mcu buffer allocation in mt76x02u driversLorenzo Bianconi
Move mcu buffer allocation in mt76x2u/mt76x0u drivers since newer chipsets (e.g. mt7663u) does not rely on synchronous mcu communication Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76x02u: avoid overwrite max_tx_fragmentsLorenzo Bianconi
Starting from 'commit ee8040139ab1 ("mt76: do not overwrite max_tx_fragments if it has been set")' we can avoid overwriting max_tx_fragments for mt76x02u devices Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: add multiple wiphy support to mt76_get_min_avg_rssiFelix Fietkau
Allow tracking clients of both wiphys separately Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move txpower and antenna mask to struct mt76_phyFelix Fietkau
Adds multiple wiphy support to mt76_get_txpower Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move txpower_conf back to driver specific structsFelix Fietkau
Nothing in the core uses it Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move state from struct mt76_dev to mt76_phyFelix Fietkau
Allows keeping per-wiphy state separate Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move channel state to struct mt76_phyFelix Fietkau
Add support for an extra wiphy in mt76_set_channel and mt76_get_survey This is preparation for supporting multiple wiphys per device to support the concurrent dual-band feature of MT7615D Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: add support for an extra wiphy in the main tx pathFelix Fietkau
This is preparation for supporting multiple wiphys per device to support the concurrent dual-band feature of MT7615D Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-12-02mt76: mt76x0: fix default mac address overwriteLorenzo Bianconi
Current implementation always use default eeprom mac address to configure device registers even if it is updated using mt76_eeprom_override. Fix it initializing macaddr filed of mt76_dev data structure with eeprom mac address and running mt76_eeprom_override before mt76x02_mac_setaddr Fixes: d1bc9bf2072c ("mt76: mt76x0: eeprom: add support for MAC address from OF") Tested-by: Kevin Schmidt <kevin.patrick.schmidt@googlemail.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20mt76: move mt76_get_antenna in mt76_core moduleLorenzo Bianconi
Move mt76_get_antenna in mac80211.c in order to be reused by all drivers. Initialize .get_antenna function pointer for mt76x0, mt7603, mt7615 and mt76x2u drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20Revert "mt76: mt76x0e: don't use hw encryption for MT7630E"Stanislaw Gruszka
This reverts commit 34b0e9b767bfa09ae233ca0d6ceb299bf2e24600. Since commit 7bd0650be63c ("mt76: dma: fix buffer unmap with non-linear skbs") is no longer necessary to disable HW encryption for MT7630E. Disabling HW encryption helped previously because somehow fragmented skb's are not created if mac80211 encrypt frames, so buffer unmap bug of non-linear skbs was not triggered. Now since this bug is properly fixed by commit 7bd0650be63c ("mt76: dma: fix buffer unmap with non-linear skbs") , we can enable HW encryption back. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: use mt76_dev in mt76_is_{mmio,usb}Lorenzo Bianconi
Convert mt76_is_mmio and mt76_is_usb to rely on mt76_dev instead of mt76x02_dev since this is a property not strictly related to hw chipset and it will be more reusable Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76u: rely on a dedicated stats workqueueLorenzo Bianconi
rate controller and throughput are very sensitive to tx status timing. In order to improve performances when the system is heavily loaded, substitute stat_work delayed_work with a regular work_struct and create a mt76u dedicated workqueue for tx status reporting Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76u: rely on usb_interface instead of usb_devLorenzo Bianconi
usb drivers are supposed to communicate using usb_interface instead mt76x{0,2}u is now registering through usb_device. Fix it by passing usb_intf device to mt76_alloc_device routine. Fixes: 112f980ac8926 ("mt76usb: use usb_dev private data") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-By: Zero_Chaos <sidhayn@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x0: remove 350ms delay in mt76x0_phy_calibrateLorenzo Bianconi
Since mt76x0 does not save the phy calibration data it is not necessary to wait 350ms in mt76x0_phy_calibrate Tested-by: Sid Hayn <sidhayn@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x0: eeprom: add support for MAC address from OFPawel Dembicki
mt76x0e driver only supports MAC addresses from calibration data eeprom. Many routers however do not have a valid stock address set in this field. This patch makes it possible to take a MAC address from OF (e.g. from mtd). Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [adjusted for kernel submission] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x02: track approximate tx airtime for airtime fairness and surveyFelix Fietkau
Estimate by calculating duration for EWMA packet size + estimated A-MPDU length on tx status events Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x02: move MT_CH_TIME_CFG init to mt76x02_mac_cc_resetFelix Fietkau
Reduces code duplication and adds missing bits for USB variants Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: unify channel survey update codeFelix Fietkau
Host time is used to calculate the channel active time on mt7603 and mt7615. Use the same on mt76x02 and move the lock to core code to get rid of some duplicated code. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: track rx airtime for airtime fairness and surveyFelix Fietkau
Report total rx airtime for valid stations as BSS rx time in survey mt7615 is left out for now, it will be supported later by reading hardware counters instead of calculating airtime in software Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: rename mt76_driver_ops txwi_flags to drv_flags and include tx aligned4Felix Fietkau
This reduces the struct size and is useful for adding more flags later Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x02u: move mt76x02u_mac_start in mt76x02-usb moduleLorenzo Bianconi
Unify mt76x02u_mac_start between mt76x2u and mt76x0u since the code is shared between both drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x0u: reset counter starting the deviceLorenzo Bianconi
Remove mt76x02_mac_reset_counters from mt76x0_init_hardware since it will be run starting the device Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x02: move mac_reset_counter in mt76x02_lib moduleLorenzo Bianconi
Unify mac_reset_counter routine and move it in mt76x02_lib module since it is shared by all mt76x02 drivers (pci/usb) Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x0e: make array mt76x0_chan_map static const, makes object smallerColin Ian King
Don't populate the array mt76x0_chan_map on the stack but instead make it static const. Makes the object code smaller by 80 bytes. Before: text data bss dec hex filename 7685 1192 0 8877 22ad mediatek/mt76/mt76x0/eeprom.o After: text data bss dec hex filename 7541 1256 0 8797 225d mediatek/mt76/mt76x0/eeprom.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05mt76: mt76x0: remove unneeded return value on set channelStanislaw Gruszka
We allways return 0 from mt76x0_phy_set_channel(), no need to pass return value upward. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x0: remove redundant chandef copyStanislaw Gruszka
We set dev->mt76.chandef in mt76_set_channel() already. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: add default implementation for mt76_sw_scan/mt76_sw_scan_completeLorenzo Bianconi
Introduce a default implementation for mt76_sw_scan and mt76_sw_scan_complete in mt76 module and remove duplicated code since most of the drivers share the same implementation Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x02u: enable survey supportLorenzo Bianconi
Introduce channel survey support for mt76x2u and mt76x0u drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x02: introduce mt76x02_pre_tbtt_enable and mt76x02_beacon_enable ↵Lorenzo Bianconi
macros Improve code readability introducing mt76x02_pre_tbtt_enable and mt76x02_beacon_enable utility macros Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: switch to SPDX tag instead of verbose boilerplate textRyder Lee
No functional change intended. Add SPDX identifiers to all remaining files in /mt76. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x02: fix some checkpatch warningsRyder Lee
This fixes the following checkpatch warnings: ERROR: code indent should use tabs where possible CHECK: Alignment should match open parenthesis CHECK: No space is necessary after a cast CHECK: Please don't use multiple blank lines CHECK: Avoid precedence issues in macro WARNING: Statements should start on a tabstop WARNING: Unnecessary space before function pointer arguments Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: Add paragraphs to describe the config symbols fullyRyder Lee
Update the help text to fix a checkpatch warning: WARNING: please write a paragraph that describes the config symbol fully Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x0u: add support to TP-Link T2UHPLorenzo Bianconi
Introduce support to TP-Link T2UHP https://wikidevi.com/wiki/TP-LINK_Archer_T2UHP Tested-by: Sid Hayn <sidhayn@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-03mt76: mt76x0e: disable 5GHz band for MT7630EStanislaw Gruszka
MT7630E hardware does support 5GHz, but we do not properly configure phy for 5GHz channels. Scanning at this band not only do not show any APs but also can hang the firmware. Since vendor reference driver do not support 5GHz we don't know how properly configure 5GHz channels. So disable this band for MT7630E . Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03mt76: mt76x0e: don't use hw encryption for MT7630EStanislaw Gruszka
Since 41634aa8d6db ("mt76: only schedule txqs from the tx tasklet") I can observe firmware hangs on MT7630E on station mode: tx stop functioning after minor activity (rx keep working) and on module unload device fail to stop with messages: [ 5446.141413] mt76x0e 0000:06:00.0: TX DMA did not stop [ 5449.176764] mt76x0e 0000:06:00.0: TX DMA did not stop Loading module again results in failure to associate with AP. Only machine power off / power on cycle can make device work again. It's unclear why commit 41634aa8d6db causes the problem, but it is related to HW encryption. Since issue is a firmware hang, that is super hard to debug, just disable HW encryption as fix for the issue. Fixes: 41634aa8d6db ("mt76: only schedule txqs from the tx tasklet") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-20mt76: mt76x0u: do not reset radio on resumeStanislaw Gruszka
On some machines mt76x0u firmware can hung during resume, what result on messages like below: [ 475.480062] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 475.990066] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 475.990075] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 476.500003] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 476.500012] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.010046] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 477.010055] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.529997] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 477.530006] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.824907] mt76x0 1-8:1.0: Error: send MCU cmd failed:-71 [ 477.824916] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.825029] usb 1-8: USB disconnect, device number 6 and possible whole system freeze. This can be avoided, if we do not perform mt76x0_chip_onoff() reset. Cc: stable@vger.kernel.org Fixes: 134b2d0d1fcf ("mt76x0: init files") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-30Merge tag 'mt76-for-kvalo-2019-06-27' of https://github.com/nbd168/wirelessKalle Valo
mt76 patches for 5.3 * use NAPI polling for tx cleanup on mt7603/mt7615 * various fixes for mt7615 * unify some code between mt7603 and mt7615 * fix locking issues on mt76x02 * add support for toggling edcca on mt7603 * fix reading target tx power with ext PA on mt7603/mt7615 * fix initalizing channel maximum power * fix rate control / tx status reporting issues on mt76x02/mt7603 * add support for eeprom calibration data from mtd on mt7615 * support configuring tx power on mt7615 * fix external PA support on mt76x0 * per-chain signal reporting on mt7615 * rx/tx buffer fixes for USB devices
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 17:18:58 +0000