summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c
AgeCommit message (Collapse)Author
2020-09-24mt76: convert from tx tasklet to tx worker threadFelix Fietkau
This improves performance by allowing the scheduler to move the tx scheduling work to idle CPUs. Since tx scheduling work is very latency sensitive and kept short via AQL, sched_set_fifo_low is used to keep worker priority above normal tasks Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt76x02: tune tx ring sizeFelix Fietkau
Increase data queue size to improve performance. Reduce PS/mgmt queue size Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: remove struct mt76_sw_queueFelix Fietkau
All members except for the struct mt76_queue pointer have been removed Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: remove swq from struct mt76_sw_queueFelix Fietkau
Since txq selection was moved to mac80211, it is no longer used Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt76x02: clean up and fix interrupt masking in the irq handlerFelix Fietkau
Only clear unmasked interrupts. If an interrupt is temporarily masked, its pending events need to be processed later, even if another interrupt happened in the mean time. Disable interrupts in one call before scheduling Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo
mt76 driver had major conflicts within mt7615 directory. To make it easier for every merge wireless-drivers to wireless-drivers-next and solve those conflicts.
2020-07-21mt76: vif_mask to struct mt76_phyFelix Fietkau
All drivers use this in pretty much the same way. Moving it to core helps with some checks for the upcoming testmode support Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-06-23mt76: mt76x02: do not access uninitialized NAPI structsFelix Fietkau
Fixes a crash on MMIO devices when running into the watchdog reset Fixes: d3377b78cec6 ("mt76: add HE phy modes and hardware queue") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200615181341.81871-1-nbd@nbd.name
2020-05-28mt76: only iterate over initialized rx queuesFelix Fietkau
Fixes the following reported crash: [ 2.361127] BUG: spinlock bad magic on CPU#0, modprobe/456 [ 2.361583] lock: 0xffffa1287525b3b8, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 2.362250] CPU: 0 PID: 456 Comm: modprobe Not tainted 4.14.177 #5 [ 2.362751] Hardware name: HP Meep/Meep, BIOS Google_Meep.11297.75.0 06/17/2019 [ 2.363343] Call Trace: [ 2.363552] dump_stack+0x97/0xdb [ 2.363826] ? spin_bug+0xa6/0xb3 [ 2.364096] do_raw_spin_lock+0x6a/0x9a [ 2.364417] mt76_dma_rx_fill+0x44/0x1de [mt76] [ 2.364787] ? mt76_dma_kick_queue+0x18/0x18 [mt76] [ 2.365184] mt76_dma_init+0x53/0x85 [mt76] [ 2.365532] mt7615_dma_init+0x3d7/0x546 [mt7615e] [ 2.365928] mt7615_register_device+0xe6/0x1a0 [mt7615e] [ 2.366364] mt7615_mmio_probe+0x14b/0x171 [mt7615e] [ 2.366771] mt7615_pci_probe+0x118/0x13b [mt7615e] [ 2.367169] pci_device_probe+0xaf/0x13d [ 2.367491] driver_probe_device+0x284/0x2ca [ 2.367840] __driver_attach+0x7a/0x9e [ 2.368146] ? driver_attach+0x1f/0x1f [ 2.368451] bus_for_each_dev+0xa0/0xdb [ 2.368765] bus_add_driver+0x132/0x204 [ 2.369078] driver_register+0x8e/0xcd [ 2.369384] do_one_initcall+0x160/0x257 [ 2.369706] ? 0xffffffffc0240000 [ 2.369980] do_init_module+0x60/0x1bb [ 2.370286] load_module+0x18c2/0x1a2b [ 2.370596] ? kernel_read_file+0x141/0x1b9 [ 2.370937] ? kernel_read_file_from_fd+0x46/0x71 [ 2.371320] SyS_finit_module+0xcc/0xf0 [ 2.371636] do_syscall_64+0x6b/0xf7 [ 2.371930] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 2.372344] RIP: 0033:0x7da218ae4199 [ 2.372637] RSP: 002b:00007fffd0608398 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 2.373252] RAX: ffffffffffffffda RBX: 00005a705449df90 RCX: 00007da218ae4199 [ 2.373833] RDX: 0000000000000000 RSI: 00005a7052e73bd8 RDI: 0000000000000006 [ 2.374411] RBP: 00007fffd06083e0 R08: 0000000000000000 R09: 00005a705449d540 [ 2.374989] R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000000 [ 2.375569] R13: 00005a705449def0 R14: 00005a7052e73bd8 R15: 0000000000000000 Reported-by: Sean Wang <sean.wang@mediatek.com> Fixes: d3377b78cec6 ("mt76: add HE phy modes and hardware queue") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: fix per-driver wcid range checks after wcid array size bumpFelix Fietkau
All drivers before MT7915 have a limit of 128 WCID entries. Stop relying on ARRAY_SIZE(dev->mt76.wcid), since it no longer reflects that limit. Fixes: 49e649c3e0a6 ("mt76: adjust wcid size to support new 802.11ax generation") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt76x02: fix handling MCU timeouts during hw restartFelix Fietkau
If a MCU timeout occurs before a hw restart completes, another hw restart is scheduled, and the station state gets corrupted. To speed up dealing with that, do not issue any MCU commands after the first timeout, and defer handling timeouts until the reset has completed. Also ignore errors in MCU commands during start/config to avoid making user space fail on this condition. If it happens, another restart is scheduled quickly, and that usually recovers the hardware properly. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-03-17mt76: mt76x02: reset MCU timeout counter earlier in watchdog resetFelix Fietkau
Ensure that MCU commands issued right after hardware reset are not dropped and treated as failed. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: Introduce mt76_mcu data structureLorenzo Bianconi
Introduce mt76_mcu data structure to contain common fields between mt76u_mcu and mt76e_mcu. Initialize mcu common fields in mt76_alloc_device(). Rely on mt76_mcu in mt76_mcu_rx_event and in mt76_mcu_get_response in order to reuse them in usb code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: avoid extra RCU synchronization on station removalFelix Fietkau
Use sta_pre_rcu_remove callback to clear wcid pointer earlier Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move dev_irq tracepoint in mt76 moduleLorenzo Bianconi
Move dev_irq tracepoint in common code in order to be reused by mt7603 and mt7615 drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76x02: split beaconingMarkus Theil
Sending beacons to the hardware always happens in batches. In order to speed up beacon processing on usb devices, this patch splits out common code an calls it only once. Beacons are sequentially written into the beacon memory area, by tracking its usage with the dev->beacon_data_count. For MBSS support and buffered traffic dev->beacon_data_count is used to create the bypass mask. The code is also adapted for the mmio part of the driver, but should not have any performance implication there. MBSS tests were performed with AVM AC860 USB NIC with temporary support for 5 BSS'. Different combinations of active vifs were created and brought up. Afterwards connection and data transfer was tested for the announced BSS'. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move state from struct mt76_dev to mt76_phyFelix Fietkau
Allows keeping per-wiphy state separate Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: keep a set of software tx queues per phyFelix Fietkau
Allows tracking tx scheduling separately per phy Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: add support for an extra wiphy in the main tx pathFelix Fietkau
This is preparation for supporting multiple wiphys per device to support the concurrent dual-band feature of MT7615D Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x2: move mt76x02_mac_reset_counters in mt76x02_mac_startLorenzo Bianconi
Move mt76x02_mac_reset_counters in mt76x02_mac_start and get rid of mt76x2_mac_start since it is just a wrapper for mt76x02_mac_start Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: switch to SPDX tag instead of verbose boilerplate textRyder Lee
No functional change intended. Add SPDX identifiers to all remaining files in /mt76. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x02: fix some checkpatch warningsRyder Lee
This fixes the following checkpatch warnings: ERROR: code indent should use tabs where possible CHECK: Alignment should match open parenthesis CHECK: No space is necessary after a cast CHECK: Please don't use multiple blank lines CHECK: Avoid precedence issues in macro WARNING: Statements should start on a tabstop WARNING: Unnecessary space before function pointer arguments Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: move netif_napi_del in mt76_dma_cleanupLorenzo Bianconi
Move netif_napi_del in mt76_dma_cleanup routine since it is done by all drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25mt76: move tx_napi in mt76_devLorenzo Bianconi
Move tx_napi in mt76_dev data structure in order to implement concurrency between tx scheduling and tx cleanup in mt7603 and mt7615 drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: do not enable/disable pre_tbtt_tasklet in scan_start/scan_completeLorenzo Bianconi
Do not enable/disable pre_tbtt_tasklet tasklet in mt76x02_sw_scan/mt76x02_sw_scan_complete since it is already done setting the operating channel. Do run tbtt_tasklet while the device is offchannel Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: move pre_tbtt_tasklet in mt76_devLorenzo Bianconi
Move pre_tbtt_tasklet tasklet in mt76_dev data structure since it is used by all drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: move beacon_mask in mt76_devLorenzo Bianconi
Move beacon_mask in mt76_dev data structure since it is used by all drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: mt76x02: mt76x02_poll_tx() can be statickbuild test robot
Fixes: ec7d2d74760a ("mt76: mt76x02: use napi polling for tx cleanup") Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: introduce mt76_mcu_restart macroLorenzo Bianconi
Use common function wrapper in mt76x02_watchdog_reset Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: mt76x02: remove irqsave/restore in locking for tx status fifoFelix Fietkau
Use a separate lock and spin_trylock to avoid disabling interrupts. Should improve performance and latency Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: mt76x02: use napi polling for tx cleanupFelix Fietkau
This allows tx scheduling and tx cleanup to run concurrently Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: set txwi_size according to the driver valueLorenzo Bianconi
Dynamically allocate txwi since new chipsets will use longer txwi descriptors Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: only schedule txqs from the tx taskletFelix Fietkau
Reduces lock contention from the tx path and improves performance Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: move tx tasklet to struct mt76_devFelix Fietkau
Allows it to be scheduled from core code Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: use readl/writel instead of ioread32/iowrite32Felix Fietkau
Switching to readl/writel is faster because it gets rid of an unnecessary wrapper with extra checks. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76x02: make beacon slots bigger for USBStanislaw Gruszka
Since we sent PS buffered frames via beacon memory we need to make beacon slots bigger. That imply we will also need to decrease number of slots as beacon SRAM memory is limited to 8kB. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76x02: generalize some mmio beaconing functionsStanislaw Gruszka
Move some TBTT mmio functions to mt76x02_beacon.c and create new ones in order to be reused by USB pre-TBTT. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76x02: introduce beacon_opsStanislaw Gruszka
Enabling/disableing TBTT and beacon will be diffrent for USB. Introduce beacon_ops to encapsulate that and implement it for MMIO. USB implementation is noop for now. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76x02: introduce mt76x02_beacon.cStanislaw Gruszka
Move most of beaconing code into separate file and separate beacon initialization for USB and MMIO as pre TBTT implementation for USB will be different. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: dma: add static qualifier to mt76_dma_tx_queue_skbLorenzo Bianconi
As already done for mt76_dma_tx_queue_skb_raw, add static qualifier to mt76_dma_tx_queue_skb and introduce mt76_tx_queue_skb in order to run mt76_dma_tx_queue_skb in driver code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: introduce mt76_sw_queue data structureLorenzo Bianconi
Introduce mt76_sw_queue data structure in order to support new chipsets (e.g. mt7615) that have a shared hardware queue for all traffic identifiers. mt76_sw_queue will be used to track outstanding packets Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: remove mt76_queue dependency from tx_queue_skb function pointerLorenzo Bianconi
Remove mt76_queue dependency from tx_queue_skb function pointer and rely on mt76_tx_qid instead. This is a preliminary patch to introduce mt76_sw_queue support Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: dma: move mt76x02_init_{tx,rx}_queue in mt76 moduleLorenzo Bianconi
Move mt76x02_init_tx_queue and mt76x02_init_rx_queue in mt76 module in order to be reused adding support for mt7603 driver and remove duplicated code. Squash mt76x02_init_tx_queue and mt76x02_init_rx_queue in mt76_dma_alloc_queue Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-05-01mt76: mmio: move mt76x02_set_irq_mask in mt76 moduleLorenzo Bianconi
Move mt76x02_set_irq_mask in mt76 module in order to be reused adding support for mt7603 driver and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-03-19mt76: fix schedule while atomic in mt76x02_reset_stateLorenzo Bianconi
Fix following schedule while atomic in mt76x02_reset_state since synchronize_rcu is run inside a RCU section [44036.944222] mt76x2e 0000:06:00.0: MCU message 31 (seq 3) timed out [44036.944281] BUG: sleeping function called from invalid context at kernel/rcu/tree_exp.h:818 [44036.944284] in_atomic(): 1, irqs_disabled(): 0, pid: 28066, name: kworker/u4:1 [44036.944287] INFO: lockdep is turned off. [44036.944292] CPU: 1 PID: 28066 Comm: kworker/u4:1 Tainted: G W 5.0.0-rc7-wdn-t1+ #7 [44036.944294] Hardware name: Dell Inc. Studio XPS 1340/0K183D, BIOS A11 09/08/2009 [44036.944305] Workqueue: phy1 mt76x02_wdt_work [mt76x02_lib] [44036.944308] Call Trace: [44036.944317] dump_stack+0x67/0x90 [44036.944322] ___might_sleep.cold.88+0x9f/0xaf [44036.944327] rcu_blocking_is_gp+0x13/0x50 [44036.944330] synchronize_rcu+0x17/0x80 [44036.944337] mt76_sta_state+0x138/0x1d0 [mt76] [44036.944349] mt76x02_wdt_work+0x1c9/0x610 [mt76x02_lib] [44036.944355] process_one_work+0x2a5/0x620 [44036.944361] worker_thread+0x35/0x3e0 [44036.944368] kthread+0x11c/0x140 [44036.944376] ret_from_fork+0x3a/0x50 [44036.944384] BUG: scheduling while atomic: kworker/u4:1/28066/0x00000002 [44036.944387] INFO: lockdep is turned off. [44036.944389] Modules linked in: cmac ctr ccm af_packet snd_hda_codec_hdmi Introduce __mt76_sta_remove in order to run sta_remove without holding dev->mutex. Move __mt76_sta_remove outside of RCU section in mt76x02_reset_state Fixes: e4ebb8b403d1 ("mt76: mt76x2: implement full device restart on watchdog reset") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-03-07mt76: mt76x2: implement full device restart on watchdog resetFelix Fietkau
Restart the firmware and re-initialize the MAC to be able to recover from more kinds of hang states Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-26mt76: mt76x02: issue watchdog reset on MCU request timeoutFelix Fietkau
MCU request timeout usually indicates that the device is no longer responsive, and it usually does not recover without a reset Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-02-26mt76: mt76x02: fix beacon timer drift adjustmentFelix Fietkau
Check the count before incrementing it to match vendor code behavior. This defers the adjustment by one more tick, which should improve accuracy Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-01-17mt76: add channel switch announcement supportFelix Fietkau
Use the appropriate mac80211 callbacks after beacon transmission Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-01-11mt76: mmio: introduce mt76x02_check_tx_hang watchdogLorenzo Bianconi
Port mt76x02_check_tx_hang watchdog from vendor driver in order to perform a device reset when tx mac/dma logic hangs. Tx mac/dma stuck has been observed when the device is heavy loaded or in a noisy environment. Moreover introduce wdt delayed work in order to run tx_hang watchdog. For the moment run mt76x02_check_tx_hang watchdog just on mt76x2 devices since the issue has not been observed on mt76x0 driver yet Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 08:40:30 +0000