summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-6000.c
AgeCommit message (Collapse)Author
2011-04-08iwlagn: remove un-necessary function pointerWey-Yi Guy
After driver split, no need to use function pointer for those event and register dump function. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-08iwlwifi: remove extranious macro from firmware defineroot
define of firmware filenames use extra macro to build the files name. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-07iwlagn: remove ISR opsJohannes Berg
The ISR (interrupt service routine) ops are now no longer necessary since they are the same for all devices this driver now handles. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: remove BSM clock settingJohannes Berg
Again, a 4965 specific code path that we no longer need in iwlagn. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: change Copyright to 2011Wey-Yi Guy
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: remove bootstrap codeJohannes Berg
Only 4965 had a bootstrap microcode image, so the agn driver can completely ignore that and we can remove some code from it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07iwlagn: clean up ucode loadingJohannes Berg
All agn devices behave the same, so there's no need to go through function pointers for any of the ucode loading functionality. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-25iwlagn: clean up TX aggregation codeJohannes Berg
Since the driver split, there's no need for function pointers any more for aggregation queue setup and teardown as all devices now share the same code. Simplify this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-03-25iwlagn: use 6030 configuration for 6035 seriesWey-Yi Guy
6035 series of devices should use the same uCode as 6030 series, change it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-28iwlwifi: move check health code into iwl-rx.cStanislaw Gruszka
Remove check_plcp_health and check_ack_health ops methods, they are unneeded after iwlegacy driver split. Merge check health code into to iwl-rx.c and make functions static. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville
Conflicts: drivers/bluetooth/ath3k.c drivers/bluetooth/btusb.c
2011-02-02iwlagn: overwrite EEPROM chain setting for 6250 devicesWey-Yi Guy
6250 2x2 devices have 2 tx chain and 2 rx chain. For some reason, the EEPROM contain incorrect information and indicate it only has single tx chain. overwrite it with .cfg parameter to make sure both chain 'A' and chain 'B' can be used for transmit and receive Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-31iwlwifi: always support idle mode for agn devicesWey-Yi Guy
For agn devices, always support idle mode which help power consumption in idle unassociated state. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-01-21iwlagn: remove reference to gen2a and gen2bWey-Yi Guy
Since 6005, 6030 and 6150 series are offical released, remove the reference to gen2x and use the product number instead. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-01-04iwlagn: fix scan tx antenna setting on 5Ghz bandStanislaw Gruszka
Looks that we do not set correctly antennas when scanning on 5Ghz band and when bluetooth is enabled, because priv->cfg->scan_tx_antennas[band] is only defined for IEEE80211_BAND_2GHZ. To fix we check band before limiting antennas to first one. This allow to remove hard coded cfg->scan_tx_antennas[band]. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13iwlagn: code clean up to remove duplicate codeWey-Yi Guy
Multiple devices use almost the same .cfg with minor differences. Use macro and remove the duplication. By doing this, reduce the chance for mistake while modify .cfg parameters Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-12-13iwlwifi: do not reload fw if WiMAX own the RFWey-Yi Guy
For WiFi/WiMAX combo devices, if WiMAX own the RF, WiFi driver try to access RF and fail. This is the W/A to To avoid WiFi keep reloading firmware and try to access RF again. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-12-13iwlagn: remove old EEPROM TX power readingJohannes Berg
This removes the old TX power reading code, it isn't necessary since the new code is able to read all the various EEPROM layouts due to relying on information contained in the EEPROM. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-12-13iwlagn: implement layout-agnostic EEPROM readingJohannes Berg
The current EEPROM reading code has some layout assumptions that now turned out to be false with some newer versions of the EEPROM. Luckily, we can avoid all such assumptions by using data in the EEPROM itself, so implement using that. However, for risk mitigation purposes, keep the old reading code for current hardware for now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-12-13iwlagn: rx antenna diversityWey-Yi Guy
For the new 1x1 devices, hw and uCode will support rx antenna diversity, but we need to indicate 1x1 device to AccessPoint to make sure it won't use MIMO. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-12-13iwlagn: change led compensation for 6005 and 6030 devicesWey-Yi Guy
For both 6005 and 6030 devices, change the led compensation to 57 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-12-06iwlwifi: jiffies based tx queues watchdogStanislaw Gruszka
This patch replace monitor/recover timer by watchdog based on time stamp. New code allow to discover hangs more precisely. Timeout values are currently doubled monitoring period values of previous timer. This have to be tuned based of firmware timing capabilities. Tested on 3945, 4965, 5300, 6300. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02iwlagn: remove structure name reference to gen2Wey-Yi Guy
Give the corresponding name for .cfg data structure Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-11-24iwlagn: Offical name for 100/130 deviceWey-Yi Guy
Change to offical name for 100 devices: "Intel(R) Centrino(R) Wireless-N 100" Change to offical name for 130 devices: "Intel(R) Centrino(R) Wireless-N 130" Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-11-24iwlagn: Offical name for 6000g2b deviceWey-Yi Guy
Change to offical name for 6000g2b devices: "Intel(R) Centrino(R) Wireless-N 1030" "Intel(R) Centrino(R) Advanced-N 6230" Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-11-24iwlagn: Offical name for 6000g2a deviceWey-Yi Guy
Change to offical name for 6000g2a devices: "Intel(R) Centrino(R) Advanced-N 6205" Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-11-24iwlagn: Offical name for 6050g2 deviceWey-Yi Guy
Change to offical name for 6050g2 devices: "Intel(R) Centrino(R) Wireless-N 6150" Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-11-24iwlwifi: use antenna information in EEPROMWey-Yi Guy
The valid tx/rx antenna information is part of EEPROM, so use it to configure the device. For few cases, the EEPROM did not reflect the correct antenna, but it is too late to modify the EEPROM, so overwrite with .cfg parameters Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-11-24iwlwifi: advance power management supportWey-Yi Guy
For 6000g2b and up, adding advance power management support for better power consumption Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-24iwlwifi: consider BT for power managementWey-Yi Guy
Check the BT PSPoll flag when fill PM command to uCode Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16iwlagn: use SKU information in the EEPROMWey-Yi Guy
EEPROM contain the SKU information for the device, use it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-11-16iwlwifi: change default led mode for different devicesWey-Yi Guy
Set the default led mode for different devices. For the newer devices such as 6000g2a, 6000g2b and newer, the default led mode is On/Off instead of blinking. The led_mode still can be control through module parameter 0: system default 1: On/Off 2: blinking Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-11-16iwlagn: support dynamic aggregation for BT coexWey-Yi Guy
Use dynamic aggregation threshold if bt traffic load is high to reduce the impact on aggregated frame. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-11-15iwlagn: enable shadow registerWey-Yi Guy
For 6000 series devices and up, enable automatic update MAC's register for better power usage in PSP mode Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15iwlwifi: put all the isr related function under opsWey-Yi Guy
There were two type of isr supported by iwlwifi devices. legacy isr - only used by legacy devices (3945 & 4965) ict isr - used by all new generation of iwlwifi devices Move all the isr related functions into ops, the ict type of isr supports only needed for newer devices. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15iwlagn: use 6000g2b uCode for 130 series devicesWey-Yi Guy
For 130 series device, 6000g2b uCode will be used, no need to have additional defines for 130 devices, so remove those. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15iwlagn: new RXON processing for modern devicesJohannes Berg
In order to simplify the flow, and make new enhancements easier, separate out the RXON processing for modern AGN (5000 and newer) from RXON processing for the older 3945 and 4965 devices. Avoid changing these old ones to avoid regressions and move their code to a new file (iwl-legacy.c). 4965 gets the commit_rxon that used to be common for all AGN devices, but with removed PAN support. The new RXON processing is more central and does more work in committing, so that it is easier to follow. To make it more evident what is split out for legacy, split the necessary operations for that into a new struct iwl_legacy_ops. Those parts that still exist in the new AGN code don't need to be parametrized. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15iwlwifi: make mac80211 ops a device configJohannes Berg
In the future, 4965 and modern AGN devices will need to have different mac80211 callbacks since they have different capabilities. Prepare for that by making the mac80211 operations a device config. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-14iwlagn: 6050 ops should be used;Wey-Yi Guy
For 6050 series of devices, 6050 ops should be used; One of the 6050 config still use 6000 ops, fix it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-14iwlgn: need longer tx queue stuck timer for coex devicesWey-Yi Guy
For BT/WiFi combo devices, need longer tx stuck queue timer, so those devices won't reload firmware too often. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlagn: add temperature offset calib for 6000g2Shanyu Zhao
6000g2 devices need to have temperature offset calibration. The runtime uCode needs to receive the calibration results just like BB and LO calibration. To do this, driver reads the offset value from NVM and send it to uCode after runtime uCode is alive. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove apm_ops.stopJohannes Berg
Since all devices share the same operation here, there's no need to call it indirectly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove set_pwr_src operationJohannes Berg
The set_pwr_src operation is only ever used from within the same sub-driver that it is declared in, so it can just be called directly instead of being an operation. Also, it is never called to set the power source to V_aux, so change the two functions accordingly (but keep the V_aux code for documentation purposes in a comment). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove set_ct_kill operationJohannes Berg
This operation is only ever called from set_hw_params, which is also already based on the config/ops, so that there's no need to have a separate set_ct_kill op and we can just call the right ct_threshold function. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove verify_signature eeprom operationJohannes Berg
All drivers share the same implementation, so there's no need to call this via a function pointer nor to export it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlagn: add define for MODULE_FIRMWAREWey-Yi Guy
Adding MODULE_FIRMWARE define for 130 series of devices Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlagn: fix module firmware name for 130 series deviceWey-Yi Guy
130 series device should use firmware name with 130 in it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlagn: define 130 series of WiFi/BT combo devicesWey-Yi Guy
add new structures and defines need to identify 130 devices. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlagn: reduce redundant parameter definitionsWey-Yi Guy
move paramater definitions to a device paramater structure only leaving the device name, which antennas are used and what firmware file to use in the iwl_cfg structure. this will not completely remove the redundancies but greatly reduce them for devices that only vary by name or antennas. the parameters that are more likely to change within a given device family are left in iwl_cfg. also separate bt param structure added to help reduce more. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-28iwlagn: API v5 for 6050 series deviceWey-Yi Guy
For 6050 series device, change the supported API version Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 00:30:10 +0000