Age | Commit message (Collapse) | Author |
|
Bz device reset flow changed, now the hardware (instead of
firmware) will reset the PCI bus etc., this can take up to
100ms.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802215208.df30875c6ff9.I962ed0f2c3358903dc6ba1abb65726ce5acbbd48@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Device startup changed in Bz, some register bits moved around.
Change the code accordingly.
The new Bz hardware changes also the way we wake it (grab NIC
access) and the way we disable bus mastering, update the driver
code accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802215208.00a137364a95.I059a2abac948965458862941ee7db6a2e1076fa6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
The real name isn't determined yet, but give them a new
name that isn't clashing with older devices.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802215208.46b86c8074b2.I94d58b8e622ca87658dc05b05483fb954d526eab@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
If we use spaces in the queue names, we get files with spaces in their
name in procfs, which is ugly. Remove the spaces.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.0ef8aedd4f9b.If527b9ae5bf8de8c6877d4b6a21ed8d81b0f877e@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
If the firmware crashes while we're waiting for the reset
handshake then it cannot possibly make progress anymore,
and we will just time out the wait. That's pointless, so
just stop waiting at that point.
Additionally, if it never acknowledges the reset handshake,
something went wrong.
Dump an error in both of these cases, but we need to do it
synchronously here since the device will be turned off.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.8b6a33544b4b.I55f97f70f8efa64db064a9207177a094c60ac8f1@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
In some cases it may be necessary to synchronously create
a firmware error report, add the necessary infrastructure
for this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.481b6642f0fc.I7c9c958408a285e3d19aceed2a5a3341cfc08382@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
When switching op-modes, or more generally when reconfiguring,
we might switch the RB size. In _iwl_pcie_rx_init() we have a
comment saying we must free all RBs since we might switch the
size, but this is actually too late: the switch has been done
and we'll free the buffers with the wrong size.
Fix this by always freeing the buffers, if any, at the start
of configure, instead of only after the size may have changed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.42d7c93279c4.I07f74e65aab0e3d965a81206fcb289dc92d74878@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
On 64-bit machines, struct iwl_rx_mem_buffer has a lot of
padding due to the use of pointers after the small items.
Move the list entry before them, and while at it also add
documentation for it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.6a62255b3df0.I47bb36530a3c2cdbd73454c796ce608ee2a32a6c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Add new so-jf devices to the driver.
Signed-off-by: Yaara Baruch <yaara.baruch@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210719144523.1c9a59fd2760.If5aef1942007828210f0f2c4a17985f63050bb45@changeid
|
|
Add new SoF JF devices to the driver.
Signed-off-by: Yaara Baruch <yaara.baruch@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210719144523.0545d8964ff2.I3498879d8c184e42b1578a64aa7b7c99a18b75fb@changeid
|
|
add new killer devices configurations.
Signed-off-by: ybaruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210621103449.4179f7191531.I3d5ed6b2b39fcd42863a679e21bda23a6c14253e@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
This new feature allows OEMs to set a special reduced power table in a
UEFI variable, which we use to tell the firmware to change the TX
power tables.
Read the variable and store it in a dram block to pass it to the
firmware. We do this as part of the PNVM loading flow.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210621103449.259a33ba5074.I2e0bb142d2a9c412547cba89b62dd077b328fdc4@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
In gen3, after firmware is alive, we no longer need the
firmware and image loader images, only the context info
itself and PRPH info/scratch need to remain.
Call iwl_pcie_ctxt_info_gen3_free() appropriately in the
alive callback (iwl_trans_pcie_gen2_fw_alive()) with a new
argument indicating whether it can free everything or only
partially.
The context info and PRPH scratch are also not needed after
PNVM load, but we don't have a good hook for freeing after
that, so keep them for now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.8230d91a46c1.Ia7db71e5e6265ca87363f1481eac1bc3bbebb15c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
After firmware alive, iwl_trans_pcie_gen2_fw_alive() is called
to free the context info. However, on gen3 that will then free
the context info with the wrong size.
Since we free this allocation later, let it stick around until
the device is stopped for now, freeing some of it earlier is a
separate change.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.afb63fb8cbc1.If4968db8e09f4ce2a1d27a6d750bca3d132d7d70@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
In the case of gen3 devices with image loader (IML) support,
we were leaking the IML DMA allocation and never freeing it.
Fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.07e117dbedb7.I7bb9ebbe0617656986c2a598ea5e827b533bd3b9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
The TR/CR tail data are meant to be per-queue-arrays, however,
we allocate them completely wrong (we have a separate allocation
per queue).
Looking at this more closely, it turns out that the hardware
never uses these - we have a separate free list per RX queue
and maintain a write pointer for that in a register, and the
RX itself is indicated in the RB status (rb_stts) DMA region.
Despite nothing using the tail pointers, the hardware will
unconditionally access them to write updates, even when we aren't
using CRs/TRs.
Give it dummy values that we never use/update so it can do that
without causing trouble.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210617110647.5f5764e04c46.I4d5de1929be048085767f1234a1e07b517ab6a2d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
"ubd" is really called "used_bd", fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210617100544.2d4b46c656bb.Iff9ee6a7e65d439169202911dad2cbea626fb887@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Identify and print out the RF module to be able to identify
(from logs and through debugfs) which one (and version) is
present on the system.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210617100544.cd1ef97b2c04.Iad42a59902a87a50b45b9ce88705863686a83b54@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
This is duplicated with CSR_HW_RFID_TYPE so just use the latter
for less typing/shorter lines.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.00b220f4ba53.I1fe216a46e7d9c1316d681daa293064f16ff1899@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Printing the interrupt index in our local array isn't very
useful in an error message, print the interrupt number (as
also shown in e.g. /proc/interrupts) instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.05bc5157e606.Ifb65b5ed2e5296fd8258c40c4287b5443b06d337@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Add support for AX231 radio modules, which we call Fm.
These modules can be used with the Ma family of devices
and above.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.c1fdd153d686.I7ee0485c52fb429de1fe171cb6dc0ae593a26788@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
pcim_iomap_table() might return NULL, so we shouldn't unconditionally
dereference the return value by taking the [0] entry.
Handle this better by checking for NULL first, and then separately
checking if the [0] entry is NULL.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.9aa4f0e3574a.I458b283f203d5f927f00be1bfbd4b8ebf11c5ae4@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
|
|
Analogically to what we did in 2800aadc18a6 ("iwlwifi: Fix softirq/hardirq
disabling in iwl_pcie_enqueue_hcmd()"), we must apply the same fix to
iwl_pcie_gen2_enqueue_hcmd(), as it's being called from exactly the same
contexts.
Reported-by: Heiner Kallweit <hkallweit1@gmail.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2104171112390.18270@cbobk.fhfr.pm
|
|
After the fix from Jiri that disabled local IRQs instead of
just BHs (necessary to fix an issue with submitting a command
with IRQs already disabled), there was still a situation in
which we could deep in there enable BHs, if the device config
sets the apmg_wake_up_wa configuration, which is true on all
7000 series devices.
To fix that, but not require reverting commit 1ed08f6fb5ae
("iwlwifi: remove flags argument for nic_access"), split up
nic access into a version with BH manipulation to use most
of the time, and without it for this specific case where the
local IRQs are already disabled.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210415164821.d0f2edda1651.I75f762e0bed38914d1300ea198b86dd449b4b206@changeid
|
|
Change ma product string name to the correct name,
and to reflect the CRF and not the CNV.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411132130.c05b4c55540f.I8dd0361b033f63658999ba53640949701b048f17@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
In a few PCIe devices we may have to swap out the configuration
after we allocate/initialise some parts of the device because
we only know the correct one after reading some registers. This
causes some things such as the byte-count table allocations to
be incorrect, since the configuration is swapped for one with a
bigger queue size.
Fix this by initialising most of the transport much later, only
after the configuration has finally been determined.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411132130.8f5db97db1e4.Ic622da559b586a04ca536a0ec49ed5ecf03a9354@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
The debug prints help in case we get timeout on waiting for
hw.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411124417.306e2e56d3e8.I72e2977abbb1fddf23b8476bedf6a183fe969ff5@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
The only difference between iwl_pcie_napi_poll_msix_shared() and
iwl_pcie_napi_poll_msix() is when we have a shared queue and nothing
in the rx queue. This case doesn't affect CPU performance, so we can
merge the two functions.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411124417.9d1b61ef53a5.I60b33d5379cf7c12f1de30fc3fd4cefc38220141@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
In case the device is stopped any usage of hw queues needs to be
reallocated in fw due to fw reset after device stop, so all driver
internal queue should also be freed, and if we don't free the next usage
would leak the old memory and get in recover flows
"iwlwifi 0000:00:03.0: dma_pool_destroy iwlwifi:bc" warning.
Also warn about trying to reuse an internal allocated queue.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411124417.c72d2f0355c4.Ia3baff633b9b9109f88ab379ef0303aa152c16bf@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
After the removal of the software checksum code for the
A-MSDU path that we had for testing, the csum_skb variable
stuck around. Remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411124417.280f268ae679.Iad455b6c91e427c9f74963bbd3eb0ce743aaac53@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Debug message "firmware didn't ACK the reset - continue anyway\n"
in fw_reset_handshake() is classified as error, however this is not
an error as it is ignored. So, change it to info message for proper
classification of debug messages.
Signed-off-by: Ravi Darsi <ravi.darsi@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.449b3092c330.I515edcc41913ca7fbe4a4de923671d120d5618c6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
add new so-gf device to the driver.
Signed-off-by: ybaruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.d6b0c1f85a7e.I2098ca066607edc48336021ea2e5afdbf8196acf@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
add new killer devices configurations.
Signed-off-by: ybaruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.54967363d26d.I5d1a3d810cf6abace51ebb2630d62d891e9fd302@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
If we (for example) have a trans_cfg entry in the PCI IDs table,
but then don't find a full cfg entry for it in the info table,
we fall through to the code that treats the PCI ID table entry
as a full cfg entry. This obviously causes crashes later, e.g.
when trying to build the firmware name string.
Avoid such crashes by using the low bit of the pointer as a tag
for trans_cfg entries (automatically using a macro that checks
the type when assigning) and then checking that before trying to
use the data as a full entry - if it's just a partial entry at
that point, fail.
Since we're adding some macro magic, also check that the type is
in fact either struct iwl_cfg_trans_params or struct iwl_cfg,
failing compilation ("initializer element is not constant") if
it isn't.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.6f69fe6e4128.I921d4ae20ef5276716baeeeda0b001cf25b9b968@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
For simplicity we assume that msix has 2 IRQ lines one used for rx data
called msix_non_share, and another used for one bit flags messages
(alive, hw error, sw error, rx data flag) called msix_share.
Every time the FW has data to send it puts it on the RX queue and HW
turns on the flags in msix_share (inta_fw) indicating about rx data,
and HW sends an interrupt a bit later to the msix_non_share _unless_
the msix_shared RX data bit was cleared.
Currently in the code every time we get an msix_shared we clear all bits
including rx data queue bits.
So we can have a race
----------------------------------------------------
DRIVER | HW | FW
----------------------------------------------------
- send host cmd to FW | |
| | - handle message
| | and put a response
| | on the RX queue
| - RX flag on |
| | - send alive msix
| - alive flag on |
| - interrupt |
| msix_share driver |
- handle msix_shared | |
and clear all flags | |
bits | |
| - don't send an |
| interrupt on |
| msix_non_shared |
| (driver cleared) |
- driver timeout on | |
waiting for host cmd | |
respond | |
| |
----------------------------------------------------
The change is to clear only the msi_shared flags that are handled in
the msix_shared flow, which will cause the hardware to send an interrupt
on the msix_non_share line as well, when it has data.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.a1cdda2fa270.I02a82312679f4541f30bb8db8747a797dbb70ee7@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
change the step of iwlax210_2ax_cfg_so_jf_a0 to
iwlax210_2ax_cfg_so_jf_b0 as it is on the wcd_fw-dev
repository.
Signed-off-by: ybaruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.e9a9d1da76bc.Ie964f37872bbb88d1a02094134f9a2c38faad884@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Add support for different combinations of Bz
and CRFs.
Note: As of now we do not know the exact values
for ltr_delay and xtal_latency, so for now use the
worst case scenario values until the actual values
are clarified.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.caac8d996532.I6a22d6decb106cd50d7954b19236b69d685dcc39@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
We currently have a special, separate, code path to acquire NIC
access for the in-flight host-command workaround on 7000 series
hardware. However, the normal code path here has grown a number
of additional workarounds/semantics over time, such as reprobing
the device if things fail.
Rather than try to replicate any of this logic, call the normal
grab_nic_access logic for the workaround.
This changes the spinlock to _bh, but that's OK since it's just
redundant, we already have soft-IRQs disabled when we get here,
and so didn't (have to) do it again. Since it's only for commands
there's however no point in making the code more complex just to
not use _bh here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.d196fc6ffb23.Idc1ce3ce9fed9178beee7e5409bc669f79b06a0d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Most devices don't set the apmg_wake_up_wa flag, so we don't do
anything for them. Avoid taking the spinlock for every command
unless the device needs this workaround.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.1ab60af3f318.I51cc202f68a2a953223e70c3e8610343412961b6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
We have a new type of device that has a different MAC ID, but is
otherwise identical to So devices. Add rules to match this new ID
accordingly.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.4feea3560def.I2b6ef794c2073a18779dd40fb53f8c942d1ab42d@changeid
|
|
Add this specific Samsung AX201 sku to driver so it can be
detected and initialized successfully.
Signed-off-by: Matt Chen <matt.chen@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.30b622037714.Id9fd709cf1c8261c097bbfd7453f6476077dcafc@changeid
|
|
As the context info gen3 code is only called for >=AX210 devices
(from iwl_trans_pcie_gen2_start_fw()) the code there to set LTR
on 22000 devices cannot actually do anything (22000 < AX210).
Fix this by moving the LTR code to iwl_trans_pcie_gen2_start_fw()
where it can handle both devices. This then requires that we kick
the firmware only after that rather than doing it from the context
info code.
Note that this again had a dead branch in gen3 code, which I've
removed here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: ed0022da8bd9 ("iwlwifi: pcie: set LTR on more devices")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.675486178ed1.Ib61463aba6920645059e366dcdca4c4c77f0ff58@changeid
|
|
It's possible for iwl_pcie_enqueue_hcmd() to be called with hard IRQs
disabled (e.g. from LED core). We can't enable BHs in such a situation.
Turn the unconditional BH-enable/BH-disable code into
hardirq-disable/conditional-enable.
This fixes the warning below.
WARNING: CPU: 1 PID: 1139 at kernel/softirq.c:178 __local_bh_enable_ip+0xa5/0xf0
CPU: 1 PID: 1139 Comm: NetworkManager Not tainted 5.12.0-rc1-00004-gb4ded168af79 #7
Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017
RIP: 0010:__local_bh_enable_ip+0xa5/0xf0
Code: f7 69 e8 ee 23 14 00 fb 66 0f 1f 44 00 00 65 8b 05 f0 f4 f7 69 85 c0 74 3f 48 83 c4 08 5b c3 65 8b 05 9b fe f7 69 85 c0 75 8e <0f> 0b eb 8a 48 89 3c 24 e8 4e 20 14 00 48 8b 3c 24 eb 91 e8 13 4e
RSP: 0018:ffffafd580b13298 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000201 RCX: 0000000000000000
RDX: 0000000000000003 RSI: 0000000000000201 RDI: ffffffffc1272389
RBP: ffff96517ae4c018 R08: 0000000000000001 R09: 0000000000000000
R10: ffffafd580b13178 R11: 0000000000000001 R12: ffff96517b060000
R13: 0000000000000000 R14: ffffffff80000000 R15: 0000000000000001
FS: 00007fc604ebefc0(0000) GS:ffff965267480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055fb3fef13b2 CR3: 0000000109112004 CR4: 00000000003706e0
Call Trace:
? _raw_spin_unlock_bh+0x1f/0x30
iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi]
iwl_trans_txq_send_hcmd+0x6c/0x430 [iwlwifi]
iwl_trans_send_cmd+0x88/0x170 [iwlwifi]
? lock_acquire+0x277/0x3d0
iwl_mvm_send_cmd+0x32/0x80 [iwlmvm]
iwl_mvm_led_set+0xc2/0xe0 [iwlmvm]
? led_trigger_event+0x46/0x70
led_trigger_event+0x46/0x70
ieee80211_do_open+0x5c5/0xa20 [mac80211]
ieee80211_open+0x67/0x90 [mac80211]
__dev_open+0xd4/0x150
__dev_change_flags+0x19e/0x1f0
dev_change_flags+0x23/0x60
do_setlink+0x30d/0x1230
? lock_is_held_type+0xb4/0x120
? __nla_validate_parse.part.7+0x57/0xcb0
? __lock_acquire+0x2e1/0x1a50
__rtnl_newlink+0x560/0x910
? __lock_acquire+0x2e1/0x1a50
? __lock_acquire+0x2e1/0x1a50
? lock_acquire+0x277/0x3d0
? sock_def_readable+0x5/0x290
? lock_is_held_type+0xb4/0x120
? find_held_lock+0x2d/0x90
? sock_def_readable+0xb3/0x290
? lock_release+0x166/0x2a0
? lock_is_held_type+0x90/0x120
rtnl_newlink+0x47/0x70
rtnetlink_rcv_msg+0x25c/0x470
? netlink_deliver_tap+0x97/0x3e0
? validate_linkmsg+0x350/0x350
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1b2/0x280
netlink_sendmsg+0x336/0x450
sock_sendmsg+0x5b/0x60
____sys_sendmsg+0x1ed/0x250
? copy_msghdr_from_user+0x5c/0x90
___sys_sendmsg+0x88/0xd0
? lock_is_held_type+0xb4/0x120
? find_held_lock+0x2d/0x90
? lock_release+0x166/0x2a0
? __fget_files+0xfe/0x1d0
? __sys_sendmsg+0x5e/0xa0
__sys_sendmsg+0x5e/0xa0
? lockdep_hardirqs_on_prepare+0xd9/0x170
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fc605c9572d
Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 da ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 2e ef ff ff 48
RSP: 002b:00007fffc83789f0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000055ef468570c0 RCX: 00007fc605c9572d
RDX: 0000000000000000 RSI: 00007fffc8378a30 RDI: 000000000000000c
RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
R13: 00007fffc8378b80 R14: 00007fffc8378b7c R15: 0000000000000000
irq event stamp: 170785
hardirqs last enabled at (170783): [<ffffffff9609a8c2>] __local_bh_enable_ip+0x82/0xf0
hardirqs last disabled at (170784): [<ffffffff96a8613d>] _raw_read_lock_irqsave+0x8d/0x90
softirqs last enabled at (170782): [<ffffffffc1272389>] iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi]
softirqs last disabled at (170785): [<ffffffffc1271ec6>] iwl_pcie_enqueue_hcmd+0x116/0xa00 [iwlwifi]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-rc3
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2103021125430.12405@cbobk.fhfr.pm
|
|
warning in iwl_pcie_rx_handle())
We can't call netif_napi_add() with rxq-lock held, as there is a potential
for deadlock as spotted by lockdep (see below). rxq->lock is not
protecting anything over the netif_napi_add() codepath anyway, so let's
drop it just before calling into NAPI.
========================================================
WARNING: possible irq lock inversion dependency detected
5.12.0-rc1-00002-gbada49429032 #5 Not tainted
--------------------------------------------------------
irq/136-iwlwifi/565 just changed the state of lock:
ffff89f28433b0b0 (&rxq->lock){+.-.}-{2:2}, at: iwl_pcie_rx_handle+0x7f/0x960 [iwlwifi]
but this lock took another, SOFTIRQ-unsafe lock in the past:
(napi_hash_lock){+.+.}-{2:2}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(napi_hash_lock);
local_irq_disable();
lock(&rxq->lock);
lock(napi_hash_lock);
<Interrupt>
lock(&rxq->lock);
*** DEADLOCK ***
1 lock held by irq/136-iwlwifi/565:
#0: ffff89f2b1440170 (sync_cmd_lockdep_map){+.+.}-{0:0}, at: iwl_pcie_irq_handler+0x5/0xb30
the shortest dependencies between 2nd lock and 1st lock:
-> (napi_hash_lock){+.+.}-{2:2} {
HARDIRQ-ON-W at:
lock_acquire+0x277/0x3d0
_raw_spin_lock+0x2c/0x40
netif_napi_add+0x14b/0x270
e1000_probe+0x2fe/0xee0 [e1000e]
local_pci_probe+0x42/0x90
pci_device_probe+0x10b/0x1c0
really_probe+0xef/0x4b0
driver_probe_device+0xde/0x150
device_driver_attach+0x4f/0x60
__driver_attach+0x9c/0x140
bus_for_each_dev+0x79/0xc0
bus_add_driver+0x18d/0x220
driver_register+0x5b/0xf0
do_one_initcall+0x5b/0x300
do_init_module+0x5b/0x21c
load_module+0x1dae/0x22c0
__do_sys_finit_module+0xad/0x110
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
SOFTIRQ-ON-W at:
lock_acquire+0x277/0x3d0
_raw_spin_lock+0x2c/0x40
netif_napi_add+0x14b/0x270
e1000_probe+0x2fe/0xee0 [e1000e]
local_pci_probe+0x42/0x90
pci_device_probe+0x10b/0x1c0
really_probe+0xef/0x4b0
driver_probe_device+0xde/0x150
device_driver_attach+0x4f/0x60
__driver_attach+0x9c/0x140
bus_for_each_dev+0x79/0xc0
bus_add_driver+0x18d/0x220
driver_register+0x5b/0xf0
do_one_initcall+0x5b/0x300
do_init_module+0x5b/0x21c
load_module+0x1dae/0x22c0
__do_sys_finit_module+0xad/0x110
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
INITIAL USE at:
lock_acquire+0x277/0x3d0
_raw_spin_lock+0x2c/0x40
netif_napi_add+0x14b/0x270
e1000_probe+0x2fe/0xee0 [e1000e]
local_pci_probe+0x42/0x90
pci_device_probe+0x10b/0x1c0
really_probe+0xef/0x4b0
driver_probe_device+0xde/0x150
device_driver_attach+0x4f/0x60
__driver_attach+0x9c/0x140
bus_for_each_dev+0x79/0xc0
bus_add_driver+0x18d/0x220
driver_register+0x5b/0xf0
do_one_initcall+0x5b/0x300
do_init_module+0x5b/0x21c
load_module+0x1dae/0x22c0
__do_sys_finit_module+0xad/0x110
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
}
... key at: [<ffffffffae84ef38>] napi_hash_lock+0x18/0x40
... acquired at:
_raw_spin_lock+0x2c/0x40
netif_napi_add+0x14b/0x270
_iwl_pcie_rx_init+0x1f4/0x710 [iwlwifi]
iwl_pcie_rx_init+0x1b/0x3b0 [iwlwifi]
iwl_trans_pcie_start_fw+0x2ac/0x6a0 [iwlwifi]
iwl_mvm_load_ucode_wait_alive+0x116/0x460 [iwlmvm]
iwl_run_init_mvm_ucode+0xa4/0x3a0 [iwlmvm]
iwl_op_mode_mvm_start+0x9ed/0xbf0 [iwlmvm]
_iwl_op_mode_start.isra.4+0x42/0x80 [iwlwifi]
iwl_opmode_register+0x71/0xe0 [iwlwifi]
iwl_mvm_init+0x34/0x1000 [iwlmvm]
do_one_initcall+0x5b/0x300
do_init_module+0x5b/0x21c
load_module+0x1dae/0x22c0
__do_sys_finit_module+0xad/0x110
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
[ ... lockdep output trimmed .... ]
Fixes: 25edc8f259c7106 ("iwlwifi: pcie: properly implement NAPI")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2103021134060.12405@cbobk.fhfr.pm
|
|
Randy reported an error on his randconfig builds:
ERROR: modpost: "iwl_so_trans_cfg" [drivers/net/wireless/intel/iwlwifi/iwlwifi.ko] undefined!
The problem was that when CONFIG_IWLMVM was disabled we were still accessing
iwl_so_trans_cfg. Fix it by moving IS_ENABLED() check before the access.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 930be4e76f26 ("iwlwifi: add support for SnJ with Jf devices")
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1614236661-20274-1-git-send-email-kvalo@codeaurora.org
|
|
Move fw reset timeout to a FW_RESET_TIMEOUT macro
for better readability.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210172142.f71c99f461ff.If32fe0afed277ec99ba0d7e2615c27a8a80a0d29@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
When the interface goes up, we have already loaded the PNVM during
init, so we don't load it anymore. But we still need to set the PNVM
values in the context so that the FW can load it again.
Call set_pnvm when the PNVM is already loaded and change the
trans_pcie implementation to accept a second call to set_pnvm when we
have already allocated and, in this case, only set the values without
allocating again.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210172142.622546a3566f.I659a8b9aa944d213c4ba446e142d74f3f6db9c64@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
WARNING is better than crashing. Since this happened to me,
be on the safe side.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.d4651427fcda.I1bcecb73676d039e2521309c07fc6b6314a90546@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Add support for AX201 and AX211 radio modules, which we call HR2 and
GF, respectively. These modules can be used with the Ma family of
devices and above.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.f8e3080ce633.I7377b421b031796730daf809c4024a3c3ef95fa8@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|