Age | Commit message (Collapse) | Author |
|
The iwl_pcie_alloc_fw_monitor_block() function has an argument
that's only ever hard-coded to 11, remove it and hard-code the
value into the function itself with a comment.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.737c153e8259.Ibe6250ca812cfa2f00ac47e5e0d1595c6b9b4875@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When we restart the firmware, we shouldn't keep old debug data
around. Since the "allocate" function might not reallocate the
memory block (it's only freed when we unbind from the device),
clear the memory to have a clean slate for debug data.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.73c32255a132.Ibd7101dcd285b01ee879fddfbf52c30d49ced3c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for C0 version of MAC and RF for BZ and GL devices.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.90ad8aab8a03.I86d1675095f0e4f5286d9b7c2b00a0220f524472@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The hardware, depending on which part fails or times out,
returns 0xA5A5A5A. or 0x5A5A5A5. with the lowest 4 bits
encoding some further reason/status. However, mostly we
don't really need to care about the exact reasons, so
unify the checks for this to avoid hardcoding those magic
values all over the driver.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.3e2959741a38.I1c297a53787b87e4e2b8f296c041921338573f4d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Replace the field reduce_power_dram with a struct that holds data about
the reduced-power tables drams regions. Generalize load_payloads_segments()
to work for both pnvm tables and reduction power tables.
Make required adjustments in the data structures.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.6fe66958f049.I85d80682229fc02fe354462cc9da40937558f30c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Generalize the parsing, loading, and setting of the power-reduce
tables, in order to support allocation of several DRAM payloads
in the future.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.564f1eead99b.Iaba653b21dc09aafc72b9bbb3928abddce0db50a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Take the part that copies the tables into DRAM, out of the method
that sets the prph_scratch to make the code cleaner. Each of the
operations will get more complex in the future when it will also
support larger power-reduce tables images.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.7695684dc848.I13626cd318e5d68efec9618b2045f52788bff114@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Save the pnvm payloads in several DRAM segments (not only in one as
used to). In addition, allocate a FW structure in DRAM that holds the
segments' addresses and forward its address to the FW. It's done when
FW has the capability to handle pnvm images this way (helps to process
large pnvm images).
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.dbdad8995ce1.I986213527982637042532de3851a1bd8a11be87a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for fragmented pnvm images, depending on the FW capability.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.c49bfaf435a9.I0278312e7c3355b224cd870d4f8cf6578d12f03e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Change the field pnvm_dram to an array that describes many regions
and add a counter to the number of pnvm regions that were allocated
in DRAM.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.bb206d71bf45.I627640701757bb2f234f8e18a3afbd6af1206658@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Take the part that is copying the pnvm image into DRAM, out of the
the method that sets the prph_scratch. Makes the code cleaner since
those 2 operations don't always happen together (loading should happen
only once while setting can happen more than once).
In addition, each operation will get more complex in the future when
it will support also larger pnvm images.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.4c0728239fd6.Ibc30a9fbdb6123dadbe2dbb89318dbd5ec01080a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Generalize iwl_pnvm_parse(). This saves us from copying each payload
twice (first in the parsing and later when copying it to the dram).
Moreover, its more compatible for handling larger pnvm tables in
the future (in which payloads won't be concatenated).
The main changes are:
1. Take out the concatenating of the payloads from the parsing level
2. Start using iwl_pnvm_image structure that will hold pointers to
payloads that should be delivered to fw, their sizes and number.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230606103519.06c02f380b6f.I03a3030fca194aa0c4bc2ecd18531f8914e98cfd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The 100ms shouldn't be needed, only 10ms. However after
reset we should have 10ms as well for these devices.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230531194629.9a5627c1ff18.Ifcfbccd5458bd9ebd496aa834284fb0facfcaaef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
trans_pcie->rba.alloc_wq only hosts a single work item and thus doesn't need
explicit concurrency limit. Let's use the default @max_active. This doesn't
cost anything and clearly expresses that @max_active doesn't matter.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Berg <johannes.berg@intel.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Gregory Greenman <gregory.greenman@intel.com>
Cc: Avraham Stern <avraham.stern@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mordechay Goodstein <mordechay.goodstein@intel.com>
Cc: "Haim, Dreyfuss" <haim.dreyfuss@intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
|
|
Add support for B0 version of MAC of MR device
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230418122405.5dca1ea7a0cf.I87932e1e216a1940eeae8824071ecb777f4c034f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since we didn't reset t to 0, only the first iteration of the loop
did checked the ready bit several times.
From the second iteration and on, we just tested the bit once and
continued to the next iteration.
Reported-and-tested-by: Lorenzo Zolfanelli <lorenzo@zolfa.nl>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216452
Fixes: 289e5501c314 ("iwlwifi: fix the preparation of the card")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.615b683ab9c8.Ic52c3229d3345b0064fa34263293db095d88daf8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When rx/tx queues are being freed, on a different CPU there could be
still rx flow running. Call napi_synchronize() to prevent such a race.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Co-developed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://lore.kernel.org/r/20230416154301.5171ee44dcc1.Iff18718540da412e084e7d8266447d40730600ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
An integer overflow occurs in the iwl_write_to_user_buf() function,
which is called by the iwl_dbgfs_monitor_data_read() function.
static bool iwl_write_to_user_buf(char __user *user_buf, ssize_t count,
void *buf, ssize_t *size,
ssize_t *bytes_copied)
{
int buf_size_left = count - *bytes_copied;
buf_size_left = buf_size_left - (buf_size_left % sizeof(u32));
if (*size > buf_size_left)
*size = buf_size_left;
If the user passes a SIZE_MAX value to the "ssize_t count" parameter,
the ssize_t count parameter is assigned to "int buf_size_left".
Then compare "*size" with "buf_size_left" . Here, "buf_size_left" is a
negative number, so "*size" is assigned "buf_size_left" and goes into
the third argument of the copy_to_user function, causing a heap overflow.
This is not a security vulnerability because iwl_dbgfs_monitor_data_read()
is a debugfs operation with 0400 privileges.
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.2d80ace81532.Iecfba549e0e0be21bbb0324675392e42e75bd5ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for a new PCI device ID 0x272b once registering with PCIe.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.56342664110d.I5aa6f2858fdcf69fdea4f1a873115a48bd43764e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add RF step id handling and handle for BZ device.
Read CNV Aux register and uses for no OTP case.
Add missing rf support for Bz/Bnj device and correct/add
the mapping for rf-type if OTP not present.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.8f2e2fff7bbc.Iee5554178bc5f134dcc28591db0968e619afbdca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
It is possible that iwl_pci_probe() will fail and free the trans,
then afterwards iwl_pci_remove() will be called and crash by trying
to access trans which is already freed, fix it.
iwlwifi 0000:01:00.0: Detected crf-id 0xa5a5a5a2, cnv-id 0xa5a5a5a2
wfpm id 0xa5a5a5a2
iwlwifi 0000:01:00.0: Can't find a correct rfid for crf id 0x5a2
...
BUG: kernel NULL pointer dereference, address: 0000000000000028
...
RIP: 0010:iwl_pci_remove+0x12/0x30 [iwlwifi]
pci_device_remove+0x3e/0xb0
device_release_driver_internal+0x103/0x1f0
driver_detach+0x4c/0x90
bus_remove_driver+0x5c/0xd0
driver_unregister+0x31/0x50
pci_unregister_driver+0x40/0x90
iwl_pci_unregister_driver+0x15/0x20 [iwlwifi]
__exit_compat+0x9/0x98 [iwlwifi]
__x64_sys_delete_module+0x147/0x260
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.082f6e21341b.I0db21d7fa9a828d571ca886713bd0b5d0b6e1e5c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
On 22000 and AX210 devices, there's a ROM bug that causes it to
set invalid LTR settings. On 22000 and AX210 non-integrated we
can fix up these settings from the driver (as done in the code
here), but on AX210 integrated these registers are not available
to the driver.
Attempt to work around the issue by spinning while the IML is
being loaded, the IML will then reprogram the LTR values itself
after it's loaded, so only the brief IML load (which the ROM is
doing) is affected.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.aaa0a4339984.If08da23e960b6236f8c05c06fc8b26041ac89f1e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the IPC registers are used for sleep control, setting
the IPC sleep bit already triggers an interrupt to the fw, so
there is no need to also set the doorbell. Setting also the
doorbell triggers the sleep interrupt twice which lead to
an assert.
Fixes: af08571d3925 ("iwlwifi: pcie: support Bz suspend/resume trigger")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.b5f2f6e44d38.I4cb5b6ad4914db47a714e731c4c8b4db679cabce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Correction in config data is done for loading the ucode.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.879b654c8d83.I7dbea9f411a0b6f47908c4ad6321c7e55cbeb636@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
update the device configuration for HR1 device for SO and SOF device.
QuZ device configuration is corrected to support specific CRF.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.86f08520323f.Ieccb50de47f877b85732000a0d67b645eeeb0c2a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There're two identical entries for ax1650 device in
iwl_dev_info_table. Remove one of the duplicate entries.
Fixes: 953e66a7238b ("iwlwifi: add new ax1650 killer device")
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230410140721.897683-2-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add missing rf support for spacific rf for BnJ device
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.eeb7ebb9ed87.I30c3938221aeb6f6ba2c84b1a77eea54c9dd3ba1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add missing rf support for Bz device and B-Step for BnJ device
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230314194113.14c373dcfe15.I96b96a8b149ac181e962f4b82e0d15b172823d0f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Support new HW step of BnJ-Fm4 device
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230305124407.bb0591c59898.If04d7a45707ba008981f8c8ea7f7f107880f146c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add missing RF name extraction for MsP device from hardware rf-id.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230305124406.ae831f21ec55.Iad71cc30f9930f7ebe079d210ebe6c968a159273@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Read the STEP equalizer parameters from the BIOS during init
and transfer it to the firmware.
This table provides values to configure an equalizer at the transmitter
that can be used to compensate for PCB channel attenuation.
Signed-off-by: Ayala Barazani <ayala.barazani@intel.com>
Link: https://lore.kernel.org/r/20230127002430.f25f871c5e17.I8390ab916c8f681229433ebc576ed37a594c6d30@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
|
|
Read and store crf and cdb id details to make it
available during driver's lifetime
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221205102808.888b30780128.Ic8c4c088a75a0d7092d6301ef3760a118a06d819@changeid
|
|
When doing the PLDR flow, the fw goes through a re-read and needs
PCI re-enumeration in order to recover. In this case, skip the mac
start retry and fw dumps as all the fw and registers are invalid
until the PCI re-enumeration.
In addition, print the register that shows the re-read counter
when loading the fw.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Link: https://lore.kernel.org/r/20221123225313.9ae77968961e.Ie06e886cef4b5921b65dacb7724db1276bed38cb@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.1
Few stack changes and lots of driver changes in this round. brcmfmac
has more activity as usual and it gets new hardware support. ath11k
improves WCN6750 support and also other smaller features. And of
course changes all over.
Note: in early September wireless tree was merged to wireless-next to
avoid some conflicts with mac80211 patches, this shouldn't cause any
problems but wanted to mention anyway.
Major changes:
mac80211
- refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO)
feature continues
brcmfmac
- support CYW43439 SDIO chipset
- support BCM4378 on Apple platforms
- support CYW89459 PCIe chipset
rtw89
- more work to get rtw8852c supported
- P2P support
- support for enabling and disabling MSDU aggregation via nl80211
mt76
- tx status reporting improvements
ath11k
- cold boot calibration support on WCN6750
- Target Wake Time (TWT) debugfs support for STA interface
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- implement SRAM dump debugfs interface
- enable threaded NAPI on all hardware
- WoW support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
wcn36xx
- add SNR from a received frame as a source of system entropy
* tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits)
wifi: rtl8xxxu: Improve rtl8xxxu_queue_select
wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM
wifi: rtl8xxxu: gen2: Enable 40 MHz channel width
wifi: rtw89: 8852b: configure DLE mem
wifi: rtw89: check DLE FIFO size with reserved size
wifi: rtw89: mac: correct register of report IMR
wifi: rtw89: pci: set power cut closed for 8852be
wifi: rtw89: pci: add to do PCI auto calibration
wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf
wifi: rtw89: add DMA busy checking bits to chip info
wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels
wifi: rtw89: pci: mask out unsupported TX channels
iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
wifi: iwlwifi: Track scan_cmd allocation size explicitly
brcmfmac: Remove the call to "dtim_assoc" IOVAR
brcmfmac: increase dcmd maximum buffer size
brcmfmac: Support 89459 pcie
brcmfmac: increase default max WOWL patterns to 16
cw1200: fix incorrect check to determine if no element is found in list
...
====================
Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We tell driver developers to always pass NAPI_POLL_WEIGHT
as the weight to netif_napi_add(). This may be confusing
to newcomers, drop the weight argument, those who really
need to tweak the weight can use netif_napi_add_weight().
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN
Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support in BZ-FM and BZ-GL devices. Adjust current structs
steps to differ between the new devices.
Signed-off-by: Yaara Baruch <yaara.baruch@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.0b7fc8487039.I984dcb58272e2f38c835e7aaa7e1ac646bc2f65e@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
|
|
At least mips64 has ist own CAUSE macro, so rename ours to
IWL_CAUSE to fix build issues.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: c1918196427b ("iwlwifi: pcie: simplify MSI-X cause mapping")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220523220300.682be2029361.I283200b18da589a975a284073dca8ed001ee107a@changeid
|
|
We're currently manually encoding a calculation here since the HW
just maps all the bits of specific registers to specific offsets,
which led to the bug fixed here previously with the Bz SW_ERROR
interrupt.
Clean up the code to only know about the mapping offset (-16 or
16 depending on the register) to avoid such issues in the future.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220517120044.19abe9a4d171.I934356911277f9b2a955808763f317986f69a461@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
brcmfmac
* add BCM43454/6 support
rtw89
* add support for 160 MHz channels and 6 GHz band
* hardware scan support
iwlwifi
* support UHB TAS enablement via BIOS
* remove a bunch of W=1 warnings
* add support for channel switch offload
* support 32 Rx AMPDU sessions in newer devices
* add support for a couple of new devices
* add support for band disablement via BIOS
mt76
* mt7915 thermal management improvements
* SAR support for more mt76 drivers
* mt7986 wmac support on mt7915
ath11k
* debugfs interface to configure firmware debug log level
* debugfs interface to test Target Wake Time (TWT)
* provide 802.11ax High Efficiency (HE) data via radiotap
ath9k
* use hw_random API instead of directly dumping into random.c
wcn36xx
* fix wcn3660 to work on 5 GHz band
ath6kl
* add device ID for WLU5150-D81
cfg80211/mac80211
* initial EHT (from 802.11be) support
(EHT rates, 320 MHz, larger block-ack)
* support disconnect on HW restart
* tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits)
mac80211: Add support to trigger sta disconnect on hardware restart
mac80211: fix potential double free on mesh join
mac80211: correct legacy rates check in ieee80211_calc_rx_airtime
nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation
mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible
mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
rtw89: 8852c: process logic efuse map
rtw89: 8852c: process efuse of phycap
rtw89: support DAV efuse reading operation
rtw89: 8852c: add chip::dle_mem
rtw89: add page_regs to handle v1 chips
rtw89: add chip_info::{h2c,c2h}_reg to support more chips
rtw89: add hci_func_en_addr to support variant generation
rtw89: add power_{on/off}_func
rtw89: read chip version depends on chip ID
rtw89: pci: use a struct to describe all registers address related to DMA channel
rtw89: pci: add V1 of PCI channel address
rtw89: pci: add struct rtw89_pci_info
rtw89: 8852c: add 8852c empty files
MAINTAINERS: add devicetree bindings entry for mt76
...
====================
Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to also update the IVAR location, since we've shifted
the bit.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 571836a02c7b ("iwlwifi: pcie: update sw error interrupt for BZ family")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.bcfb28484e50.I921df6b5134785d7eeb0c934e4a43157c582fa79@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Driver needs to enable IMR which is needed for debug on
certain platforms, so add a device config flag to set it.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.0b96b2760503.I08bc741c8c497a2edbe4784cdab6abd8d04c62f3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Delete the redundant word 'the'.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20211216085756.11053-1-wangxiang@cdjrlc.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Newer firmware versions will support a new queue allocation
command, in order to deal with MLD where multiple stations
are used for a single queue. Add support for the new command.
This requires some refactoring of the queue allocation API,
which now gets
- the station mask instead of the station ID
- the flags without the "enable" flag, since that's no longer
used in the new API
Additionally, this new API now requires that we remove queues
before removing a station, the firmware will no longer do that
internally. Also add support for that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220210181930.acbf22ac2b66.I2bf38578c5ca1f7ffb2011a782f772db92fc4965@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
The device was defined under Ma instead of So, and add 2 missing
killer devices from the 211 family.
Signed-off-by: Yaara Baruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220210181930.02142c6f0579.Ic480a0cc08625e74a8449262aeebb1813edf9979@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
It is yet unclear if the WARNING really points to a real problem,
but for sure the stack dump doesn't help fixing it.
Just use a regular error print instead.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220205112029.a79e733a12f7.I8189344294222be0589fa43cc70fdf38e3057045@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Adapt rx queue write pointer for Bz family.
The register has moved to the same one as Tx.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220204122220.57bd62a4365c.I873aa9b3d13abf5633a4963c55c3a09a833254f0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
The Bz devices got a new completion descriptor again since
we only ever really used 4 out of 32 bytes anyway. Adjust
the code to deal with that. Note that the intention was to
reduce the size, but the hardware was implemented wrongly.
While at it, do some cleanups and remove the union to simplify
the code, clean up iwl_pcie_free_bd_size() to no longer need
an argument and add iwl_pcie_used_bd_size() with the logic to
selct completion descriptor size.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220204122220.bef461a04110.I90c8885550fa54eb0aaa4363d322f50e301175a6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
If the device is malfunctioning and reports too short rx descriptor
length, iwl_rx_packet_payload_len() will underflow, eventually resulting
in accessing memory out of bounds and other bad things. Prevent this.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220130115024.ea00b52c6f25.I8b79b14f1af8b6f2f579f97b397b9e005fe446b1@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Add support for BZ-U and BZ-L HW
with GF, GF4, MR, FM and FM4 RF modules
Signed-off-by: Mike Golant <michael.golant@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220130115024.da218b81e88d.I5aa958baef1691d443b9f6e42f7b68514e89f0dc@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Support debug collection of the platform IMR memory region,
where data is copied by FW during d3 state
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.715f04ecc635.Ib89a6caa06c1324c1c0dd3f9f4cf7407f2857155@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|