summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm
AgeCommit message (Collapse)Author
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-03Merge branch 'timers/vdso' into timers/coreThomas Gleixner
so the hyper-v clocksource update can be applied.
2019-06-29iwlwifi: mvm: clear rfkill_safe_init_done when we start the firmwareEmmanuel Grumbach
Otherwise it'll stay set forever which is clearly buggy. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: mvm: delay GTK setting in FW in AP modeJohannes Berg
In AP (and IBSS) mode, we can only set GTKs to firmware after we have sent down the multicast station, but this we can only do after we've enabled beaconing, etc. However, during rfkill exit, hostapd will configure the keys before starting the AP, and cfg80211/mac80211 accept it happily. On earlier devices, this didn't bother us as GTK TX wasn't really handled in firmware, we just put the key material into the TX cmd and thus it only mattered when we actually transmitted a frame. On newer devices, however, the firmware needs to track all of this and that doesn't work if we add the key before the (multicast) sta it belongs to. To fix this, keep a list of keys to add during AP enable, and call the function there. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: mvm: remove MAC_FILTER_IN_11AX for AP modeLuca Coelho
The FW API was clarified saying that this flag should only be set in BSS client mode. Remove it from the MAC_CTXT command we send in AP and GO modes. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Fixes: 3b5ee8dd8bb1 ("iwlwifi: mvm: set MAC_FILTER_IN_11AX in AP mode") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg: debug recording stop and restart command removeShahar S Matityahu
The 0xF6 command used to start and stop the recording from 22560 devices was removed. This is causing an assert when the driver tries to alter the recording state. Remove the use of the command. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg: don't stop dbg recording before entering D3 from 9000 devicesShahar S Matityahu
From 9000 device family the FW automatically stops the debug recording and the driver should not stop it as well. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: mvm: make the usage of TWT configurableEmmanuel Grumbach
TWT is still very new and we expect issues. Make its usage configurable and disable it by default. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg: move trans debug fields to a separate structShahar S Matityahu
Unite iwl_trans debug related fields under iwl_trans_debug struct to increase readability and keep iwl_trans clean. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: mvm: Drop large non sta framesAndrei Otcheretianski
In some buggy scenarios we could possible attempt to transmit frames larger than maximum MSDU size. Since our devices don't know how to handle this, it may result in asserts, hangs etc. This can happen, for example, when we receive a large multicast frame and try to transmit it back to the air in AP mode. Since in a legal scenario this should never happen, drop such frames and warn about it. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: mvm: Add log information about SAR statusHaim Dreyfuss
Inform users when SAR status is changing. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: Add support for SAR South Korea limitationHaim Dreyfuss
South Korea is adding a more strict SAR limit called "Limb SAR". Currently, WGDS SAR offset group 3 is not used (not mapped to any country). In order to be able to comply with South Korea new restriction: - OEM will use WGDS SAR offset group 3 to South Korea limitation. - OEM will change WGDS revision to 1 (currently latest revision is 0) to notify that Korea Limb SAR applied. - Driver will read the WGDS table and pass the values to FW (as usual) - Driver will pass to FW an indication that Korea Limb SAR is applied in case table revision is 1. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: mvm: convert to FW AC when configuring MU EDCAShaul Triebitz
The AC numbers used by mac80211 differ from those used by the firmware. When setting MU EDCA params for each AC, use the correct FW AC numbers. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: mvm: correctly fill the ac array in the iwl_mac_ctx_cmdNaftali Goldstein
The indexes into the ac array in the iwl_mac_ctx_cmd are from the iwl_ac enum and not the txfs. The current code therefore puts the edca params in the wrong indexes of the array, causing wrong priority for data-streams of different ACs. Fix this. Note that this bug only occurs in NICs that use the new tx api, since in the old tx api the txf number is equal to the corresponding ac in the iwl_ac enum. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: remove some unnecessary NULL checksDan Carpenter
These pointers are an offset into the "sta" struct. They're assigned like this: const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap; They're not the first member of the struct (->supp_rates[] is first) so they can't be NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: d3: Use struct_size() helperGustavo A. R. Silva
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, change the following form: sizeof(*pattern_cmd) + wowlan->n_patterns * sizeof(struct iwlagn_wowlan_pattern) to : struct_size(pattern_cmd, patterns, wowlan->n_patterns) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: fw api: support adwell HB default APs number apiShahar S Matityahu
Support adaptive dwell high band default number of APs new api. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: mvm: remove multiple debugfs entriesMordechay Goodstein
Now that we have per station control over amsdu size no need for multiple entries, especially that the old one is misleading due to not setting it for all protocols as a limit. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg_ini: implement dump info collectionShahar S Matityahu
The info struct contains data about the FW, HW, RF and the debug configuration. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: mvm: add a debugfs entry to set a fixed size AMSDU for all TX packetsMordechay Goodstein
The current debugfs entry only limits the max AMSDU for TCP. Add a new debugfs entry to allow setting a fixed AMSDU size for all TX packets, including UDP and ICMP Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg_ini: add consecutive trigger firing supportShahar S Matityahu
When a dump trigger is fired, the driver sets IWL_FWRT_STATUS_DUMPING and aborts any consecutive dump collection. To allow consecutive triggers firing, use 5 dump workers and allocate them upon incoming dump collection requests. This functionality is needed since in ini debug mode each trigger may have entirely different memory regions to collect unlike the legacy mode in which all the triggers dump the same memory regions. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: iwl_mvm_tx_mpdu() must be called with BH disabledJiri Kosina
As iwl_mvm_tx_mpdu() is not disabling BH while obtaining iwl_mvm_sta->lock (which is being taken from BH context as well), it has to be always invoked with BH disabled. Make that clear in a comment. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-22timekeeping: Use proper clock specifier names in functionsJason A. Donenfeld
This makes boot uniformly boottime and tai uniformly clocktai, to address the remaining oversights. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/20190621203249.3909-2-Jason@zx2c4.com
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Lots of bug fixes here: 1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer. 2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John Crispin. 3) Use after free in psock backlog workqueue, from John Fastabend. 4) Fix source port matching in fdb peer flow rule of mlx5, from Raed Salem. 5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet. 6) Network header needs to be set for packet redirect in nfp, from John Hurley. 7) Fix udp zerocopy refcnt, from Willem de Bruijn. 8) Don't assume linear buffers in vxlan and geneve error handlers, from Stefano Brivio. 9) Fix TOS matching in mlxsw, from Jiri Pirko. 10) More SCTP cookie memory leak fixes, from Neil Horman. 11) Fix VLAN filtering in rtl8366, from Linus Walluij. 12) Various TCP SACK payload size and fragmentation memory limit fixes from Eric Dumazet. 13) Use after free in pneigh_get_next(), also from Eric Dumazet. 14) LAPB control block leak fix from Jeremy Sowden" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits) lapb: fixed leak of control-blocks. tipc: purge deferredq list for each grp member in tipc_group_delete ax25: fix inconsistent lock state in ax25_destroy_timer neigh: fix use-after-free read in pneigh_get_next tcp: fix compile error if !CONFIG_SYSCTL hv_sock: Suppress bogus "may be used uninitialized" warnings be2net: Fix number of Rx queues used for flow hashing net: handle 802.1P vlan 0 packets properly tcp: enforce tcp_min_snd_mss in tcp_mtu_probing() tcp: add tcp_min_snd_mss sysctl tcp: tcp_fragment() should apply sane memory limits tcp: limit payload size of sacked skbs Revert "net: phylink: set the autoneg state in phylink_phy_change" bpf: fix nested bpf tracepoints with per-cpu data bpf: Fix out of bounds memory access in bpf_sk_storage vsock/virtio: set SOCK_DONE on peer shutdown net: dsa: rtl8366: Fix up VLAN filtering net: phylink: set the autoneg state in phylink_phy_change net: add high_order_alloc_disable sysctl/static key tcp: add tcp_tx_skb_cache sysctl ...
2019-06-14mac80211: call rate_control_send_low() internallyJohannes Berg
There's no rate control algorithm that *doesn't* want to call it internally, and calling it internally will let us modify its behaviour in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 322Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details the full gnu general public license is included in this distribution in the file called license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 29 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000435.438503728@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-01iwlwifi: mvm: change TLC config cmd sent by rs to be asyncLior Cohen
The TLC_MNG_CONFIG sync cmd sent by the rs leads to a kernel warning of sleeping while in rcu read-side critical section. The fix is to change the command to be ASYNC (not blocking for the response anymore). Signed-off-by: Lior Cohen <lior2.cohen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-01iwlwifi: print fseq info upon fw assertShahar S Matityahu
Read fseq info from FW registers and print it upon fw assert. The print is needed since the fseq version coming from the TLV might not be the actual version that is used. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-01iwlwifi: fix load in rfkill flow for unified firmwareEmmanuel Grumbach
When we have a single image (same firmware image for INIT and OPERATIONAL), we couldn't load the driver and register to the stack if we had hardware RF-Kill asserted. Fix this. This required a few changes: 1) Run the firmware as part of the INIT phase even if its ucode_type is not IWL_UCODE_INIT. 2) Send the commands that are sent to the unified image in INIT flow even in RF-Kill. 3) Don't ask the transport to stop the hardware upon RF-Kill interrupt if the RF-Kill is asserted. 4) Allow the RF-Kill interrupt to take us out of L1A so that the RF-Kill interrupt will be received by the host (to enable the radio). Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-01iwlwifi: mvm: remove d3_sram debugfs fileJohannes Berg
This debugfs file is really old, and cannot work properly since the unified image support. Rather than trying to make it work, which is difficult now due to multiple images (LMAC/UMAC etc.) just remove it - we no longer need it since we properly do a FW coredump even in D3 cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-05Merge tag 'wireless-drivers-next-for-davem-2019-05-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.2 Most likely the last patchset of new feature for 5.2, and this time we have quite a lot of new features. Most obvious being rtw88 from Realtek which supports RTL8822BE and RTL8822CE 802.11ac devices. We have also new hardware support for existing drivers and improvements. There's one conflict in iwlwifi, my example conflict resolution below. Major changes: iwlwifi * bump the 20000-series FW API version * work on new hardware continues * RTT confidence indication support for Fine Timing Measurement (FTM) * an improvement in HE (802.11ax) rate-scaling * add command version parsing from the fimware TLVs * add support for a new WoWLAN patterns firmware API rsi * add support for rs9116 mwifiex * add support for SD8987 brcmfmac * add quirk for ACEPC T8 and T11 mini PCs rt2x00 * add RT3883 support qtnfmac * fix debugfs interface to support multiple cards rtw88 * new driver mt76 * share more code across drivers * add support for MT7615 chipset * rework DMA API * tx/rx performance optimizations * use NAPI for tx cleanup on mt76x02 * AP mode support for USB devices * USB stability fixes * tx power handling fixes for 76x2 * endian fixes Conflicts: There's a trivial conflict in drivers/net/wireless/intel/iwlwifi/fw/file.h, just leave IWL_UCODE_TLV_FW_FSEQ_VERSION to the file. 'git diff' output should be just empty: diff --cc drivers/net/wireless/intel/iwlwifi/fw/file.h index cd622af90077,b0671e16e1ce..000000000000 --- a/drivers/net/wireless/intel/iwlwifi/fw/file.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/file.h ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three trivial overlapping conflicts. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29iwlwifi: dbg_ini: add periodic trigger supportShahar S Matityahu
Allows to configure a periodic data collection Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-29iwlwifi: mvm: Don't sleep in RX pathAndrei Otcheretianski
Don't use cancel_delayed_work_sync() inside the channel switch notifications as they are handled synchronously as part of the RX path. Fix that by replacing it with cancel_delayed_work(). This should be safe as we don't really care whether the work is already started and in such case we would disconnect anyway. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-29iwlwifi: mvm: limit TLC according to our HE capabilitiesLiad Kaufman
Instead of setting the TLC config command according to the rates the peer supports, make sure that we aren't also limited by our own rates, so take the minimum between the peer's supported RX rates and our supported TX rates. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-29iwlwifi: mvm: report FTM start time TSF when applicableAvraham Stern
When the interface that is requesting an FTM measurement is connected to a BSS, it is possible that the FTM request was originated by an RRM request from the AP. In this case the station needs to report the measurement start time in terms of the TSF of the AP. Since there is no indication in the FTM request itself if the TSF is needed, always report the TSF if the station is associated. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-29iwlwifi: mvm: support v2 of the WoWLAN patterns commandLuca Coelho
Add new definitions for the WoWLAN patterns API version 2 and support for version 2 of the WoWLAN patterns command without implementing the new features. With this commit we only supporting the existing bitmask pattern match. Use the new version only if the TLV is set. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-28iwlwifi: mvm: fix merge damage in iwl_mvm_vif_dbgfs_register()Luca Coelho
When I rebased Greg's patch, I accidentally left the old if block that was already there. Remove it. Fixes: 154d4899e411 ("iwlwifi: mvm: properly check debugfs dentry before using it") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-28iwlwifi: mvm: check for length correctness in iwl_mvm_create_skb()Luca Coelho
We don't check for the validity of the lengths in the packet received from the firmware. If the MPDU length received in the rx descriptor is too short to contain the header length and the crypt length together, we may end up trying to copy a negative number of bytes (headlen - hdrlen < 0) which will underflow and cause us to try to copy a huge amount of data. This causes oopses such as this one: BUG: unable to handle kernel paging request at ffff896be2970000 PGD 5e201067 P4D 5e201067 PUD 5e205067 PMD 16110d063 PTE 8000000162970161 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 1824 Comm: irq/134-iwlwifi Not tainted 4.19.33-04308-geea41cf4930f #1 Hardware name: [...] RIP: 0010:memcpy_erms+0x6/0x10 Code: 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe RSP: 0018:ffffa4630196fc60 EFLAGS: 00010287 RAX: ffff896be2924618 RBX: ffff896bc8ecc600 RCX: 00000000fffb4610 RDX: 00000000fffffff8 RSI: ffff896a835e2a38 RDI: ffff896be2970000 RBP: ffffa4630196fd30 R08: ffff896bc8ecc600 R09: ffff896a83597000 R10: ffff896bd6998400 R11: 000000000200407f R12: ffff896a83597050 R13: 00000000fffffff8 R14: 0000000000000010 R15: ffff896a83597038 FS: 0000000000000000(0000) GS:ffff896be8280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff896be2970000 CR3: 000000005dc12002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: iwl_mvm_rx_mpdu_mq+0xb51/0x121b [iwlmvm] iwl_pcie_rx_handle+0x58c/0xa89 [iwlwifi] iwl_pcie_irq_rx_msix_handler+0xd9/0x12a [iwlwifi] irq_thread_fn+0x24/0x49 irq_thread+0xb0/0x122 kthread+0x138/0x140 ret_from_fork+0x1f/0x40 Fix that by checking the lengths for correctness and trigger a warning to show that we have received wrong data. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-27netlink: make validation more configurable for future strictnessJohannes Berg
We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19iwlwifi: mvm: Change an 'else if' into an 'else' in iwl_mvm_send_add_bcast_staNathan Chancellor
When building with -Wsometimes-uninitialized, Clang warns: drivers/net/wireless/intel/iwlwifi/mvm/sta.c:2114:12: warning: variable 'queue' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] Clang can't evaluate at this point that WARN(1, ...) always returns true because __ret_warn_on is defined as !!(condition), which isn't immediately evaluated as 1. Change this branch to else so that it's clear to Clang that we intend to bail out here. Link: https://github.com/ClangBuiltLinux/linux/issues/399 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> [added a few more braces] Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-19iwlwifi: mvm: support rtt confidence indicationAvraham Stern
The range response notification API has changed to add a value that indicates the confidence of the rtt result. Support the new API and print the rtt confidence for debug. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-19iwlwifi: rs: consider LDPC capability in case of HEGregory Greenman
When building TLC configuration command, consider in case of HE, if LDPC support is turned on in our capabilities. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-19iwlwifi: mvm: set 512 TX queue slots for AX210 devicesShaul Triebitz
AX210 devices support 256 BA (256 MPDUs in an AMPDU). The firmware requires that the number of TFDs will be minimum twice as big as the BA size (2 * 256 = 512). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-18Merge tag 'wireless-drivers-next-for-davem-2019-04-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.2 Nothing really special standing out this time, iwlwifi being the most active driver. Major changes: iwlwifi * send NO_DATA events so they can be captured in radiotap * support for multiple BSSID * support for some new FW API versions * support new hardware * debugfs cleanups by Greg-KH qtnfmac * allow each MAC to specify its own regulatory rules ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18iwlwifi: mvm: properly check debugfs dentry before using itGreg Kroah-Hartman
debugfs can now report an error code if something went wrong instead of just NULL. So if the return value is to be used as a "real" dentry, it needs to be checked if it is an error before dereferencing it. This is now happening because of ff9fb72bc077 ("debugfs: return error values, not NULL"). If multiple iwlwifi devices are in the system, this can cause problems when the driver attempts to create the main debugfs directory again. Later on in the code we fail horribly by trying to dereference a pointer that is an error value. Reported-by: Laura Abbott <labbott@redhat.com> Reported-by: Gabriel Ramirez <gabriello.ramirez@gmail.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Intel Linux Wireless <linuxwifi@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: stable <stable@vger.kernel.org> # 5.0 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-18iwlwifi: mvm: don't attempt debug collection in rfkillJohannes Berg
If we fail to initialize because rfkill is enabled, then trying to do debug collection currently just fails. Prevent that in the high-level code, although we should probably also fix the lower level code to do things more carefully. It's not 100% clear that it fixes this commit, as the original dump code at the time might've been more careful. In any case, we don't really need to dump anything in this expected scenario. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 7125648074e8 ("iwlwifi: add fw dump upon RT ucode start failure") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: mvm: support HE context cmd API changeSara Sharon
Support API change to pass all mbssid parameters to the firmware. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: mvm: use correct GP2 register address for 22000 familyAvraham Stern
The device time register address has changed for 22000 devices. Add a util function for getting the GP2 time and use the correct register address depending on the device family. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 09:32:09 +0000