Age | Commit message (Collapse) | Author |
|
There are two modes now, and we have two places checking
that must be in sync. Refactor the logic into a new small
helper function.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.ef6246f4b73b.I44820ec095634dd0bba3007465cf25e4ce1c77c6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
B step doesn't support full checksum yet, move to c step.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.697a9d74e84d.I6724874112692a04e29287cac9dad7140532557f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
IEEE80211_TX_CTL_NO_CCK_RATE indicates that CCK rates should not be
used, but is ignored by the driver. Fix it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413102635.a322d18b5eb1.Icc46027a03f90feffb6fab49a5d82e54829d3dd9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The link management queues associated with the broadcast stations
were forgotten and so the same queue was used with both broadcast
stations. This leads to lost frames and warnings on cleanup and
HW restart.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.0671fa976832.Id5aa9856fd5984e447f247e6d0c3979d9794a21a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For bcase/mcast tx frames use the link queue.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.ccd7218e4be2.I40f608a0441190cc26137b039f7cb7b065fd4e0c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For an MLD AP, use the correct link mcast or bcast station id.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.0cffa6c45242.I342e17e7bca87b7f05939eb2ebd36fc2aff0b49f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
vif->bss_conf is used in this function only when TLC is not offloaded,
so not in MLO flow. Simplify the related "if" condition and call
iwl_mvm_hwrate_to_tx_status() only for driver rate scale.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.c6826d5b5477.Ib56ec6025c0da3a381aaf88e71085ce9b96a9e65@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Split iwl_mvm_sta into general and link specific parts. As a first
step, all link dependent parameters reside in deflink.
The change was done mostly using the spatch below with some manual
adjustments.
@iwl_mvm_sta@
struct iwl_mvm_sta *s;
identifier var = {sta_id, lq_sta, avg_energy};
@@
(
s->
- var
+ deflink.var
)
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.34eace06d583.I1f8c5e919a71b21030460fbdd220d42401b688b1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In MLO, some fields of iwl_mvm_vif should be defined in the
context of a link. Define a separate structure for these fields and
add a deflink object to hold it as part of iwl_mvm_vif. Non-MLO legacy
code will use only deflink object while MLO related code will use the
corresponding link from the link array.
It follows the strategy applied in mac80211 for introducing MLO
changes.
The below spatch takes care of updating all driver code to access
fields separated into MLD specific data structure via deflink (need
to convert all references to the fields listed in var to deflink.var
and also to take care of calls like iwl_mvm_vif_from_mac80211(vif)->field).
@iwl_mld_vif@
struct iwl_mvm_vif *v;
struct ieee80211_vif *vv;
identifier fn;
identifier var = {bssid, ap_sta_id, bcast_sta, mcast_sta,
beacon_stats, smps_requests, probe_resp_data,
he_ru_2mhz_block, cab_queue, phy_ctxt,
queue_params};
@@
(
v->
- var
+ deflink.var
|
fn(vv)->
- var
+ deflink.var
)
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.4896576f0a9f.Ifaf0187c96b9fe52b24bd629331165831a877691@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For TM/FTM frames, report the hardware timestamps reported by the
fw as part of the RX/TX status. Since the fw reports the timestamps
in a dedicated notification (and not as part of the RX/TX status),
hold the frame until the fw timestamps notification is received.
Timestamping is enabled when a station is connected and disabled
when disconnected. For AP interface, only the first station will
have timestamping enabled since the fw only supports timestamping
for one peer.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.e0392d498101.I9bf12c8ecfb3f17253a13dc48a48647ddd6e7855@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
VHT, HE and EHT rates use the same bits for NSS, so no need for
defines per PHY version.
Also use spatch to replace bit manipulation with FIELD_GET:
@@
identifier rate;
@@
-((rate & RATE_MCS_NSS_MSK) >> RATE_MCS_NSS_POS)
+FIELD_GET(RATE_MCS_NSS_MSK, rate)
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230305124407.167ed9477aa8.Ibd8e71d31896e8d8f067ce4e3a6e9a0e86c78f3f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Non-QOS nullfunc frames should be sent on MGMT queue similarly to
the QOS nullfunc frames. It means that the corresponding TID should
remain IWL_MAX_TID_COUNT. Make the condition more strict, so the TID
won't be changed to IWL_TID_NON_QOS.
Link: https://lore.kernel.org/r/20230127002430.a05bf77c9e29.I06262424878232b46fecd58743c889e4c3216bbf@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
|
|
We see kernel crashes and lockups and KASAN errors related to ax210
firmware crashes. One of the KASAN dumps pointed at the tx path,
and it appears there is indeed a way to double-free an skb.
If iwl_mvm_tx_skb_sta returns non-zero, then the 'skb' sent into the
method will be freed. But, in case where we build TSO skb buffer,
the skb may also be freed in error case. So, return 0 in that particular
error case and do cleanup manually.
BUG: KASAN: use-after-free in __list_del_entry_valid+0x12/0x90
iwlwifi 0000:06:00.0: 0x00000000 | tsf hi
Read of size 8 at addr ffff88813cfa4ba0 by task btserver/9650
CPU: 4 PID: 9650 Comm: btserver Tainted: G W 5.19.8+ #5
iwlwifi 0000:06:00.0: 0x00000000 | time gp1
Hardware name: Default string Default string/SKYBAY, BIOS 5.12 02/19/2019
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x6d
print_report.cold.12+0xf2/0x684
iwlwifi 0000:06:00.0: 0x1D0915A8 | time gp2
? __list_del_entry_valid+0x12/0x90
kasan_report+0x8b/0x180
iwlwifi 0000:06:00.0: 0x00000001 | uCode revision type
? __list_del_entry_valid+0x12/0x90
__list_del_entry_valid+0x12/0x90
iwlwifi 0000:06:00.0: 0x00000048 | uCode version major
tcp_update_skb_after_send+0x5d/0x170
__tcp_transmit_skb+0xb61/0x15c0
iwlwifi 0000:06:00.0: 0xDAA05125 | uCode version minor
? __tcp_select_window+0x490/0x490
iwlwifi 0000:06:00.0: 0x00000420 | hw version
? trace_kmalloc_node+0x29/0xd0
? __kmalloc_node_track_caller+0x12a/0x260
? memset+0x1f/0x40
? __build_skb_around+0x125/0x150
? __alloc_skb+0x1d4/0x220
? skb_zerocopy_clone+0x55/0x230
iwlwifi 0000:06:00.0: 0x00489002 | board version
? kmalloc_reserve+0x80/0x80
? rcu_read_lock_bh_held+0x60/0xb0
tcp_write_xmit+0x3f1/0x24d0
iwlwifi 0000:06:00.0: 0x034E001C | hcmd
? __check_object_size+0x180/0x350
iwlwifi 0000:06:00.0: 0x24020000 | isr0
tcp_sendmsg_locked+0x8a9/0x1520
iwlwifi 0000:06:00.0: 0x01400000 | isr1
? tcp_sendpage+0x50/0x50
iwlwifi 0000:06:00.0: 0x48F0000A | isr2
? lock_release+0xb9/0x400
? tcp_sendmsg+0x14/0x40
iwlwifi 0000:06:00.0: 0x00C3080C | isr3
? lock_downgrade+0x390/0x390
? do_raw_spin_lock+0x114/0x1d0
iwlwifi 0000:06:00.0: 0x00200000 | isr4
? rwlock_bug.part.2+0x50/0x50
iwlwifi 0000:06:00.0: 0x034A001C | last cmd Id
? rwlock_bug.part.2+0x50/0x50
? lockdep_hardirqs_on_prepare+0xe/0x200
iwlwifi 0000:06:00.0: 0x0000C2F0 | wait_event
? __local_bh_enable_ip+0x87/0xe0
? inet_send_prepare+0x220/0x220
iwlwifi 0000:06:00.0: 0x000000C4 | l2p_control
tcp_sendmsg+0x22/0x40
sock_sendmsg+0x5f/0x70
iwlwifi 0000:06:00.0: 0x00010034 | l2p_duration
__sys_sendto+0x19d/0x250
iwlwifi 0000:06:00.0: 0x00000007 | l2p_mhvalid
? __ia32_sys_getpeername+0x40/0x40
iwlwifi 0000:06:00.0: 0x00000000 | l2p_addr_match
? rcu_read_lock_held_common+0x12/0x50
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_sched_held+0x5a/0xd0
? lock_release+0xb9/0x400
? lock_downgrade+0x390/0x390
? ktime_get+0x64/0x130
? ktime_get+0x8d/0x130
? rcu_read_lock_held_common+0x12/0x50
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_held_common+0x12/0x50
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? rcu_read_lock_bh_held+0xb0/0xb0
__x64_sys_sendto+0x6f/0x80
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f1d126e4531
Code: 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 35 80 0c 00 41 89 ca 8b 00 85 c0 75 1c 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 67 c3 66 0f 1f 44 00 00 55 48 83 ec 20 48 89
RSP: 002b:00007ffe21a679d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000000000000ffdc RCX: 00007f1d126e4531
RDX: 0000000000010000 RSI: 000000000374acf0 RDI: 0000000000000014
RBP: 00007ffe21a67ac0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000010
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000
</TASK>
Allocated by task 9650:
kasan_save_stack+0x1c/0x40
__kasan_slab_alloc+0x6d/0x90
kmem_cache_alloc_node+0xf3/0x2b0
__alloc_skb+0x191/0x220
tcp_stream_alloc_skb+0x3f/0x330
tcp_sendmsg_locked+0x67c/0x1520
tcp_sendmsg+0x22/0x40
sock_sendmsg+0x5f/0x70
__sys_sendto+0x19d/0x250
__x64_sys_sendto+0x6f/0x80
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 9650:
kasan_save_stack+0x1c/0x40
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x102/0x170
kmem_cache_free+0xc8/0x3e0
iwl_mvm_mac_itxq_xmit+0x124/0x270 [iwlmvm]
ieee80211_queue_skb+0x874/0xd10 [mac80211]
ieee80211_xmit_fast+0xf80/0x1180 [mac80211]
__ieee80211_subif_start_xmit+0x287/0x680 [mac80211]
ieee80211_subif_start_xmit+0xcd/0x730 [mac80211]
dev_hard_start_xmit+0xf6/0x420
__dev_queue_xmit+0x165b/0x1b50
ip_finish_output2+0x66e/0xfb0
__ip_finish_output+0x487/0x6d0
ip_output+0x11c/0x350
__ip_queue_xmit+0x36b/0x9d0
__tcp_transmit_skb+0xb35/0x15c0
tcp_write_xmit+0x3f1/0x24d0
tcp_sendmsg_locked+0x8a9/0x1520
tcp_sendmsg+0x22/0x40
sock_sendmsg+0x5f/0x70
__sys_sendto+0x19d/0x250
__x64_sys_sendto+0x6f/0x80
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The buggy address belongs to the object at ffff88813cfa4b40
which belongs to the cache skbuff_fclone_cache of size 472
The buggy address is located 96 bytes inside of
472-byte region [ffff88813cfa4b40, ffff88813cfa4d18)
The buggy address belongs to the physical page:
page:ffffea0004f3e900 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88813cfa6c40 pfn:0x13cfa4
head:ffffea0004f3e900 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x5fff8000010200(slab|head|node=0|zone=2|lastcpupid=0x3fff)
raw: 005fff8000010200 ffffea0004656b08 ffffea0008e8cf08 ffff8881081a5240
raw: ffff88813cfa6c40 0000000000170015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88813cfa4a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88813cfa4b00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff88813cfa4b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88813cfa4c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88813cfa4c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes: 08f7d8b69aaf ("iwlwifi: mvm: bring back mvm GSO code")
Link: https://lore.kernel.org/linux-wireless/20220928193057.16132-1-greearb@candelatech.com/
Tested-by: Amol Jawale <amol.jawale@candelatech.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20221123225313.21b1ee31d666.I3b3ba184433dd2a544d91eeeda29b467021824ae@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
|
|
For Bz A-step hardware, the checksum offload is broken and
we need to use the old way, which is still there. Do that,
which requires taking the checksum capability bits out of
the IWL_DEVICE_BZ macro and listing them individually.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221102165239.6bc379f1b0b1.I204223f1b1c2fe26f414aea6679ef7fce681c33a@changeid
|
|
Devices with new Tx API have the IV introduced by the HW and it is not
present in the skb at all. Hence we don't need to tell
iwl_mvm_mei_tx_copy_to_csme to jump over 8 bytes to get to the ethernet
header.
Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221030191011.12dc42133502.Idd744ffeeb84b880eb497963ee02563cbb959a42@changeid
|
|
The A-MSDU data needs to be stored per-link and aggregated into a single
value for the station. Add a new struct ieee_80211_sta_aggregates in
order to store this data and a new function
ieee80211_sta_recalc_aggregates to update the current data for the STA.
Note that in the non MLO case the pointer in ieee80211_sta will directly
reference the data in deflink.agg, which means that recalculation may be
skipped in that case.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
To add MLD, reuse the bss_conf structure later for per-link
information, so move some things into it that are per link.
Most transformations were done with the following spatch:
@@
expression sdata;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-sdata->vif.var
+sdata->vif.bss_conf.var
@@
struct ieee80211_vif *vif;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-vif->var
+vif->bss_conf.var
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently in mac80211 each STA object is represented
using sta_info datastructure with the associated
STA specific information and drivers access ieee80211_sta
part of it.
With MLO (Multi Link Operation) support being added
in 802.11be standard, though the association is logically
with a single Multi Link capable STA, at the physical level
communication can happen via different advertised
links (uniquely identified by Channel, operating class,
BSSID) and hence the need to handle multiple link
STA parameters within a composite sta_info object
called the MLD STA. The different link STA part of
MLD STA are identified using the link address which can
be same or different as the MLD STA address and unique
link id based on the link vif.
To support extension of such a model, the sta_info
datastructure is modified to hold multiple link STA
objects with link specific params currently within
sta_info moved to this new structure. Similarly this is
done for ieee80211_sta as well which will be accessed
within mac80211 as well as by drivers, hence trivial
driver changes are expected to support this.
For current non MLO supported drivers, only one link STA
is present and link information is accessed via 'deflink'
member.
For MLO drivers, we still need to define the APIs etc. to
get the correct link ID and access the correct part of
the station info.
Currently in mac80211, all link STA info are accessed directly
via deflink. These will be updated to access via link pointers
indexed by link id with MLO support patches, with link id
being 0 for non MLO supported cases.
Except for couple of macro related changes, below spatch takes
care of updating mac80211 and driver code to access to the
link STA info via deflink.
@ieee80211_sta@
struct ieee80211_sta *s;
struct sta_info *si;
identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr};
@@
(
s->
- var
+ deflink.var
|
si->sta.
- var
+ deflink.var
)
@sta_info@
struct sta_info *si;
identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth};
@@
(
si->
- var
+ deflink.var
)
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com
[remove MLO-drivers notes from commit message, not clear yet; run spatch]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
brcmfmac
* add BCM43454/6 support
rtw89
* add support for 160 MHz channels and 6 GHz band
* hardware scan support
iwlwifi
* support UHB TAS enablement via BIOS
* remove a bunch of W=1 warnings
* add support for channel switch offload
* support 32 Rx AMPDU sessions in newer devices
* add support for a couple of new devices
* add support for band disablement via BIOS
mt76
* mt7915 thermal management improvements
* SAR support for more mt76 drivers
* mt7986 wmac support on mt7915
ath11k
* debugfs interface to configure firmware debug log level
* debugfs interface to test Target Wake Time (TWT)
* provide 802.11ax High Efficiency (HE) data via radiotap
ath9k
* use hw_random API instead of directly dumping into random.c
wcn36xx
* fix wcn3660 to work on 5 GHz band
ath6kl
* add device ID for WLU5150-D81
cfg80211/mac80211
* initial EHT (from 802.11be) support
(EHT rates, 320 MHz, larger block-ack)
* support disconnect on HW restart
* tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits)
mac80211: Add support to trigger sta disconnect on hardware restart
mac80211: fix potential double free on mesh join
mac80211: correct legacy rates check in ieee80211_calc_rx_airtime
nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation
mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible
mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
rtw89: 8852c: process logic efuse map
rtw89: 8852c: process efuse of phycap
rtw89: support DAV efuse reading operation
rtw89: 8852c: add chip::dle_mem
rtw89: add page_regs to handle v1 chips
rtw89: add chip_info::{h2c,c2h}_reg to support more chips
rtw89: add hci_func_en_addr to support variant generation
rtw89: add power_{on/off}_func
rtw89: read chip version depends on chip ID
rtw89: pci: use a struct to describe all registers address related to DMA channel
rtw89: pci: add V1 of PCI channel address
rtw89: pci: add struct rtw89_pci_info
rtw89: 8852c: add 8852c empty files
MAINTAINERS: add devicetree bindings entry for mt76
...
====================
Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change a few places to not shadow variables.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220130115024.d53f2a7a9614.I7441559451d54b39dc0daeb4c31e5dce19d4d83e@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Most of this change is a continuation of commit 403ea939ea6a
("iwlwifi: dbg: Mark ucode tlv data as const") propagating the
(const) type qualifier for ucode based tlv data to avoid having
the impression that it is writeable.
The other part of the change preserves the (const) type qualifier
over casts and function calls where it was previously lost.
Both changes are needed to avoid compile time errors on system with
more strict error settings, in this case found with clang on FreeBSD.
Sponsored by: The FreeBSD Foundation
Signed-off-by: Bjoern A. Zeeb <bz@FreeBSD.ORG>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
[fix double word in commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153014.3230c41312fc.I0032c597984834258d5a79b97052ed83dbe53b80@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Instead of taking the group/command separately, make the function
take a combined command ID. In many cases, this allows us to pass
an existing command ID (e.g. cmd.id), or introduce a new variable
for it, so that we don't use the command ID twice.
This way, we can also use LONG_GROUP implicitly, so we don't need
to spell that out for many commands.
Apart from mvm.h, fw/img.{c,h} changes and some copyright and
indentation updates, this was done with spatch:
@@
identifier cmd;
expression fw, G, C, def;
@@
struct iwl_host_cmd cmd = {
.id = WIDE_ID(G, C),
...
};
...
-iwl_fw_lookup_cmd_ver(fw, G, C, def)
+iwl_fw_lookup_cmd_ver(fw, cmd.id, def)
@@
identifier cmd;
expression fw, C, def;
@@
struct iwl_host_cmd cmd = {
.id = C,
...
};
...
-iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def)
+iwl_fw_lookup_cmd_ver(fw, cmd.id, def)
@@
identifier func;
expression fw, G, C, mvm, flags, cmd, size, def;
type rettype;
@@
rettype func(...)
{
+u32 cmd_id = WIDE_ID(G, C);
...
-iwl_fw_lookup_cmd_ver(fw, G, C, def)
+iwl_fw_lookup_cmd_ver(fw, cmd_id, def)
...
-iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(G, C), flags, cmd, size)
+iwl_mvm_send_cmd_pdu(mvm, cmd_id, flags, cmd, size)
...
}
@@
identifier func;
expression fw, G, C, mvm, flags, cmd, size, def;
type rettype;
@@
rettype func(...)
{
+u32 cmd_id = C;
...
-iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def)
+iwl_fw_lookup_cmd_ver(fw, cmd_id, def)
...
-iwl_mvm_send_cmd_pdu(mvm, C, flags, cmd, size)
+iwl_mvm_send_cmd_pdu(mvm, cmd_id, flags, cmd, size)
...
}
@@
expression fw, C, def;
@@
-iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def)
+iwl_fw_lookup_cmd_ver(fw, C, def)
@@
expression fw, C, G, def;
@@
-iwl_fw_lookup_cmd_ver(fw, G, C, def)
+iwl_fw_lookup_cmd_ver(fw, WIDE_ID(G, C), def)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153014.c4ac213cef5c.I6fd9a4fcbcf16ef3a3ae20a2b08ee54ebe06f96f@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
The recent fix for NULL sta in iwl_mvm_get_tx_rate() still has a call
of iwl_mvm_sta_from_mac80211() that may be called with NULL sta.
Although this practically only points to the address and the actual
access doesn't happen due to the conditional evaluation at a later
point, it looks a bit flaky.
This patch drops the temporary variable above and evaluates
iwm_mvm_sta_from_mac80211() directly for avoiding confusions.
Fixes: d599f714b73e ("iwlwifi: mvm: don't crash on invalid rate w/o STA")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220121114024.10454-1-tiwai@suse.de
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
We're checking the FW version of TX_CMD in order to decide whether to
convert rate_n_flags from the old format to the new one. If the API
is smaller or equal to 6 we should convert it. Currently we're
converting if the API version is greater than 6. Fix it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Fixes: dc52fac37c87 ("iwlwifi: mvm: Support new TX_RSP and COMPRESSED_BA_RES versions")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128142706.a264ac51d106.I228ba1317cdcbfef931c09d280d701fcad9048d2@changeid
|
|
Support TX checksum offload for Bz devices, where we have full
checksum offload (NETIF_F_HW_CSUM) and the hardware doesn't
need to parse the IP headers or anything.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.c0f44c98b36d.I75a688f3ac80cbe824c459ece4bb67843b9fce76@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Isolate the entire calculation of the offload_assist field used
for HW checksumming to the iwl_mvm_tx_csum function.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.796ae29c90d9.Icb2f07905bebd9ed4537ca4c453069211ea71799@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If we get to the WARN_ONCE(..., "Got a HT rate (...)", ...)
here with a NULL sta, then we crash because mvmsta is bad
and we try to dereference it. Fix that by printing -1 as the
state if no station was given.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 6761a718263a ("iwlwifi: mvm: add explicit check for non-data frames in get Tx rate")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20211203140410.1a1541d7dcb5.I606c746e11447fe168cf046376b70b04e278c3b4@changeid
|
|
iwlmei needs to know about the follwing events:
* Association
* De-association
* Country Code change
* SW Rfkill change
* SAR table changes
iwlmei can take the device away from us, so report the new
rfkill type when this happens.
Advertise the required data from the CSME firmware to the
usersapce: mostly, the AP that the CSME firmware is currently
associated to in case there is an active link protection
session.
Generate the HOST_ASSOC / HOST_DISSASSOC messages.
Don't support WPA1 (non-RSNA) for now.
Don't support shared wep either.
We can then determine the AUTH parameter by checking the AKM.
Feed the cipher from the key installation.
SW Rfkill will be implemented later when cfg80211 will
allow us to read the SW Rfkill state.
Co-Developed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
v7: Ayala added her signed-off
remove pointless function declaration
fix a bug due to merge conflict in the HOST_ASSOC message
v8: leave a print if we have a SAP connection on a device we do
not support (yet)
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211112062814.7502-4-emmanuel.grumbach@intel.com
|
|
Evidently, it's possible to hit this issue, so reduce the
noise from it by just having it print a (rate-limited)
message instead. We don't really know yet why we hit it,
but there's no value in having a WARN_ON() here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.8d503387b523.Id2c82d023df5128e553b28c935d30df4d9411917@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
As part of the new rate_n_flags, a new version of this
structures was added in the FW. Add support for this new
version and for the new rate_n_flags in this API.
Both these APIs were updated in one patch since they are
using the same functions.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.a28e7a92f558.I19f72735c674f815c6e7c11cecfad6230b4510ef@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
As part of the new rate_n_flags, tx_cmd API has changed.
Add support for these changes.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.26efa51624b1.Ic96ae4d81b3ff07fb514df2b5f6a8e470e4d3778@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
As a part of preparing to the new rate & flags version
Update the relevant definitions and use them.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.5862bf4f14c4.Ib476b5443faa085539b79d49a0aebd81a213b42f@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Since antenna c is not in use and won't be relevant after the new rate &
flags, remove all it's references
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.5e39106ec75b.I4281edc844f734bf9591396a5cc8009ad37ccda8@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Sending nulldata packets is important for sw AP link probing and detecting
4-address mode links. The checks that dropped these packets were apparently
added to work around an iwlwifi firmware bug with multi-TID aggregation.
Fixes: 41cbb0f5a295 ("mac80211: add support for HE")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210619101517.90806-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Control field is set by mac80211 only if case rate is not offloaded to
hw.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210135352.f845c4387eed.I30c4d26698bae1f5f8c396da80a545baa145e2ad@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
iwlwifi patches intended for v5.12
* Check FW notification sizes for robustness;
* Improvements in the NAPI implementation;
* Implement a workaround for CCA-EXT;
* Add new FW API support;
* Fix a CSA bug;
* Implement PHY integration version parsing;
* A bit of refactoring;
* One more CSA bug fix, this time in the AP side;
* Support for new So devices and a bit of reorg;
* Per Platform Antenna Gain (PPAG) fixes and improvements;
* Improvements in the debug framework;
* Some other clean-ups and small fixes.
# gpg: Signature made Fri 05 Feb 2021 12:04:21 PM EET using RSA key ID 1A3CC5FA
# gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>"
# gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"
|
|
This helps collect on any tx failure fw data to better understand what
went wrong.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210131201908.719de818c09a.I2788e6a4c411aa414eaa67e6b7b21d90ccd9d0c1@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
In roaming flows and during reassociation, its possible that data frames
such as EAPOLs for 4 way handshake/ 802.1x authentication are initially set
to higher MCS rate. Though these are pruned down to a lower legacy rate
before sending to the FW, driver also emits a kernel warning - intended for
non-data frames. Add checks to avoid such warnings for data frames, while
also enhancing the debug data printed.
Signed-off-by: Krishnanand Prabhu <krishnanand.prabhu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210117164916.d9ded010c4ce.Ie1d5a33d7175c0bcb35c10b5729748646671da31@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
In the new api all the flush in the FW is done before we
get the response and in the response we only get the updated
read pointer and all queued packets don't get anymore rx_tx
per packet to free the queued packet, so driver needs to free
all queued packets on flushed queue at once after flush response.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210117130510.4bd0eca8c0ef.I1601aad2eb2cc83f6f73b8ca52be57bb9fd626ab@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
We shouldn't trust the firmware with the sizes (or contents)
of notifications, accessing too much data could cause page
faults if the data doesn't fit into the allocated space. This
applies more on older NICs where multiple notifications can
be in a single RX buffer.
Add a general framework for checking a minimum size of any
notification in the RX handlers and use it for most. Some RX
handlers were already checking and I've moved the checks,
some more complex checks I left and made them _NO_SIZE for
the RX handlers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210117130510.3e155d5e5f90.I2121fa4ac7cd7eb98970d84b793796646afa3eed@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
net/core/tso.c got recent support for USO, and this broke iwlfifi
because the driver implemented a limited form of GSO.
Providing ->gso_type allows for skb_is_gso_tcp() to provide
a correct result.
Fixes: 3d5b459ba0e3 ("net: tso: add UDP segmentation support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Ben Greear <greearb@candelatech.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209913
Link: https://lore.kernel.org/r/20210125150949.619309-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly using the fallthrough pseudo-keyword as a
replacement for a number of "fall through" markings.
Notice that Clang doesn't recognize "fall through" comments as
implicit fall-through.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201117135053.GA13248@embeddedor
|
|
Use SPDX tags instead of the long copyright notices. Also cleanup
some duplicate copyright notices and combine the years where possible.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
This was a hack done to test the data path of devices that
didn't support well CSUM offload in Tx. This is not needed
anymore.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.6c9fc9fb48d5.I2aaebf90e6fe81860105d049a8d35746fa8d86c2@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
As some functions need to check which lmac id to use, add
a new function to find the lmac id instead of open coding it
in every function.
Signed-off-by: Nathan Errera <nathan.errera@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201008180656.ac3b43e97aa8.I308f8ed2238e32d5eef9c35ad7962f0e8b9c1902@changeid
|
|
As part of changes made to properly support auxiliary activities in CDB
NICs, an aux sta will be added when using hot spot 2.0 and will need
to be removed when roc flow is done.
In order to do so, prepare the roc_done_wk to work synchronously as the
rm_aux_sta is a SYNC command.
Since now all of th iwl_mvm_flush_sta function are using it sync,
removed the flag argument from the function.
Signed-off-by: Nathan Errera <nathan.errera@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201008180656.71b441c8b682.Ia1d216cb680308b91d6da9f73e23ae9f4baac79f@changeid
|
|
FW is changing the max number of supported stations. To adapt to the
change we get the max number from the TLV and act according to the new
number.
Signed-off-by: Nathan Errera <nathan.errera@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201008180656.863ab470babc.I393223392f36436663c4e66add03fefe77b74e60@changeid
|
|
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlwifi/mvm/tx.c:1379: warning: Function parameter or member 'rate_n_flags' not described in 'iwl_mvm_hwrate_to_tx_status'
drivers/net/wireless/intel/iwlwifi/mvm/tx.c:1379: warning: Function parameter or member 'info' not described in 'iwl_mvm_hwrate_to_tx_status'
drivers/net/wireless/intel/iwlwifi/mvm/tx.c:1431: warning: Function parameter or member 'mvm' not described in 'iwl_mvm_get_scd_ssn'
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200910065431.657636-14-lee.jones@linaro.org
|
|
The the driver prevents new Tx from being sent during the remove-station
flow is by invalidating the fw_id_to_mac_id rcu of that station.
However, if there was any Tx still in-flight (tx-cmd was sent but the
ba-notif wasn't received yet) the ba-response to those frames is simply
ignored without actually reclaiming anything. This later causes the
driver to think that that some of the station's queues aren't empty when
in practice they are which causes errors in the station remove flow.
Fix this by performing the tx-reclaim also if the rcu is invalid. any DB
that can't be updated due to this is not very important at this stage
since the station is about to be removed soon anyways.
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200926002540.72c604b4eda9.I21e75b31a9401870d18747355d4f4305b2fe1db8@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|