summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
AgeCommit message (Collapse)Author
2023-06-21wifi: iwlwifi: mvm: avoid baid size integer overflowJohannes Berg
Roee reported various hard-to-debug crashes with pings in EHT aggregation scenarios. Enabling KASAN showed that we access the BAID allocation out of bounds, and looking at the code a bit shows that since the reorder buffer entry (struct iwl_mvm_reorder_buf_entry) is 128 bytes if debug such as lockdep is enabled, then staring from an agg size 512 we overflow the size calculation, and allocate a much smaller structure than we should, causing slab corruption once we initialize this. Fix this by simply using u32 instead of u16. Reported-by: Roee Goldfiner <roee.h.goldfiner@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.f428c856030d.I2c2bb808e945adb71bc15f5b2bac2d8957ea90eb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: mvm: add EHT A-MPDU size exponent supportJohannes Berg
Add support for reading the EHT MAC capabilities A-MPDU size exponent field, as indicated by the draft spec. Also clarify the existing code a bit and add comments so it's clearer to understand what's going on here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.c5e00045d90f.I7520787fca8f8430a564adedf975d069ad8c5417@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: mvm: use min_t() for agg_sizeJohannes Berg
We can use min_t() for the agg_size and avoid spelling out the (firmware) limit twice. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.211768036c1f.I78b7eea32eaae20cc9f32869aa3f42814634ce9a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-14wifi: iwlwifi: mvm: allow ADD_STA not to be advertised by the firwmareEmmanuel Grumbach
Newest firmware don't advertise the version of ADD_STA because it has been replaced by another command. There are old firmware images that also don't advertise it. Replace all the checks with a new inline, and in that check for either MLD API or the ADD_STA command version. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230613155501.4b9305510223.I7cc143d87186f8441e9b8435cc550b76734c7eef@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-14wifi: iwlwifi: mvm: Handle return value for iwl_mvm_sta_initMukesh Sisodiya
sta_init function can fail and if it returns an error then driver should not send the request to fw to add a station. Fixes: 69aef848052b ("wifi: iwlwifi: mvm: refactor iwl_mvm_add_sta(), iwl_mvm_rm_sta()") Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230612184434.1ecd293539e8.I5ec6aab387bb2fe743a7402581beaeb9c801d31f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-07Merge wireless into wireless-nextJohannes Berg
There are a number of upcoming things in both the stack and drivers that would otherwise conflict, so merge wireless to wireless-next to be able to avoid those conflicts. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-06wifi: iwlwifi: mvm: remove useless codeJohannes Berg
Setting the station to -EBUSY was originally done under this lock, and the comment still refers to it. But this no longer happens because that was removed when DQA was removed. Remove the leftover code as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230524203151.30048b1cd0fd.Ie2c2ff6fd7c6e3ebf5b736de350dc15515970792@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-06wifi: iwlwifi: mvm: adjust csa notifications and commands to MLOGregory Greenman
In the following notifications and commands mac_id was replaced with link_id: * CANCEL_CHANNEL_SWITCH_CMD * CHANNEL_SWITCH_START_NOTIF * CHANNEL_SWITCH_ERROR_NOTIF The logic around was not changed, so only adjust handling mac/link id. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230524203151.6aa6e394f5fe.Ie9e78918511ca901f9f3966d774fa74a71a186e3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-06wifi: iwlwifi: mvm: support PASN for MLOAvraham Stern
When adding a PASN station, the non MLD API was used. This results in assert when operating as MLD. Fix it to use the MLD API when operating as MLD. For now, the default link is used for the added station. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230524203151.7c35dccc8a12.I7bc78cd16d7c750f42fdd60e07e839a860d279d2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: mvm: fix access to fw_id_to_mac_idGregory Greenman
RCU protected fw_id_to_mac_id can be initialized with either an error code or NULL. Thus, after dereferencing need to check the value with IS_ERR_OR_NULL() and not only that it is not NULL. Fix it. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.ec5f2880e81c.Ifa8c0f451df2835bde800f5c3670cc46238a3bd8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: mvm: always free dup_dataJohannes Berg
There are some assertions in the STA removal code that can fail, and in that case we may leak memory since we skip the freeing. Fix this by freeing the dup_data earlier in the function, we already have a check for when we free the station, and this we don't need to do it with and without MLD API, so it's a win all around. Fixes: a571f5f635ef ("iwlwifi: mvm: add duplicate packet detection per rx queue") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.173938681d72.Iff4b55fc52943825d6e3e28d78a24b155ea5cd22@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-20wifi: iwlwifi: mvm: prefer RCU_INIT_POINTER()Johannes Berg
For constant values we don't need rcu_assign_pointer(), use RCU_INIT_POINTER() instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230418122405.7b400d21a27f.Iccdef9d777677390a9881c88b06c0ed13a83d978@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: track station mask for BAIDsJohannes Berg
When we have MLO connections, a BAID applies to multiple firmware stations. Track the station mask instead of the station ID, getting rid of a few more deflink cases and preparing for handling link switching for BAIDs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.c08523808c34.I719b7bba499648d1495ed3e3a90889d4732ef15d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: fix shift-out-of-boundsAvraham Stern
The aux queue is initialized to IWL_MVM_INVALID_QUEUE. This is later used for a bitmask of the queue, which results in a shift-out-of-bounds. Fix it. Fixes: b85f7ebb2497 ("wifi: iwlwifi: mvm: avoid UB shift of snif_queue") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.c41a33c32898.Idc15f9eed005345a4137c28ef62efd80a405fad0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: convert TID to FW value on queue removeJohannes Berg
On queue remove, we should convert the TID value to the firmware value (8 -> 15) just like we do on queue add. Otherwise, the firmware will not be able to find the correct queue to remove. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.6651077eaec3.Ia6868c8fc1a92063609bb057b6a618726712d0bb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30Merge tag 'wireless-next-2023-03-30' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Major stack changes: * TC offload support for drivers below mac80211 * reduced neighbor report (RNR) handling for AP mode * mac80211 mesh fast-xmit and fast-rx support * support for another mesh A-MSDU format (seems nobody got the spec right) Major driver changes: Kalle moved the drivers that were just plain C files in drivers/net/wireless/ to legacy/ and virtual/ dirs. hwsim * multi-BSSID support * some FTM support ath11k * MU-MIMO parameters support * ack signal support for management packets rtl8xxxu * support for RTL8710BU aka RTL8188GU chips rtw89 * support for various newer firmware APIs ath10k * enabled threaded NAPI on WCN3990 iwlwifi * lots of work for multi-link/EHT (wifi7) * hardware timestamping support for some devices/firwmares * TX beacon protection on newer hardware * tag 'wireless-next-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (181 commits) wifi: clean up erroneously introduced file wifi: iwlwifi: mvm: correctly use link in iwl_mvm_sta_del() wifi: iwlwifi: separate AP link management queues wifi: iwlwifi: mvm: free probe_resp_data later wifi: iwlwifi: bump FW API to 75 for AX devices wifi: iwlwifi: mvm: move max_agg_bufsize into host TLC lq_sta wifi: iwlwifi: mvm: send full STA during HW restart wifi: iwlwifi: mvm: rework active links counting wifi: iwlwifi: mvm: update mac config when assigning chanctx wifi: iwlwifi: mvm: use the correct link queue wifi: iwlwifi: mvm: clean up mac_id vs. link_id in MLD sta wifi: iwlwifi: mvm: fix station link data leak wifi: iwlwifi: mvm: initialize max_rc_amsdu_len per-link wifi: iwlwifi: mvm: use appropriate link for rate selection wifi: iwlwifi: mvm: use the new lockdep-checking macros wifi: iwlwifi: mvm: remove chanctx WARN_ON wifi: iwlwifi: mvm: avoid sending MAC context for idle wifi: iwlwifi: mvm: remove only link-specific AP keys wifi: iwlwifi: mvm: skip inactive links wifi: iwlwifi: mvm: adjust iwl_mvm_scan_respect_p2p_go_iter() for MLO ... ==================== Link: https://lore.kernel.org/r/20230330205612.921134-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-30wifi: iwlwifi: mvm: correctly use link in iwl_mvm_sta_del()Johannes Berg
This function can be invoked for both MLO and non-MLO, so it must deal with multi-link correctly. Notable, on auth timeout, we'd otherwise get a warning due to the erroneous deflink usage in MLO cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230329100040.b85f6052d51a.Iedfef4b4c4f3ca557aebc0093fdc3f5cfb49b507@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: separate AP link management queuesJohannes Berg
The link management queues associated with the broadcast stations were forgotten and so the same queue was used with both broadcast stations. This leads to lost frames and warnings on cleanup and HW restart. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230329100040.0671fa976832.Id5aa9856fd5984e447f247e6d0c3979d9794a21a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: move max_agg_bufsize into host TLC lq_staGregory Greenman
This field is used only for host TLC, so it can reside inside the corresponding lq_sta struct. Also, TLC lq_sta is cleared in iwl_mvm_rs_rate_init() upon association, but max_agg_bufsize is set earlier in iwl_mvm_sta_init(). Thus, place this field in the persistent part of lq_sta to retain its value. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230329100040.d55361064e39.Ib79d30f27d94607d097f0192af2aacd455a17958@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: remove only link-specific AP keysJohannes Berg
When we remove the AP station, we iterate over the links and remove all the keys, however, the key iteration will return all keys for all links, so skip the ones that we don't need based on the link ID. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230329100039.e724878f502e.I66870d4629244b4b309be79e11cbbd384bdf93be@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: adjust iwl_mvm_sec_key_remove_ap to MLOGregory Greenman
It has to be done per link. We still don't support keys configuration for several links, but the single vif link can still point to a link different from deflink. For now handle the removal of keys for the default link. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230329100039.19d729cc4654.I4ebe8e3eb5fc00a994761f7c0ad40107382705ca@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()Gregory Greenman
Move code handling specific state transitions into separate handlers and adjust them for MLO. Adjust relevant callbacks as well. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230328104949.5a3f8a849723.I0670d20436858a1cd3c055e03c7528db81292811@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: unite sta_modify_disable_tx flowsMiri Korenblit
These flows are the same in both MLD API and the current API, except for the commands that are being sent during this flows. Instead of checking each time before calling these floews what API we use and then call the correct function, call always the old one, which in turn will call the new one in case we're using the MLD API. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230328104948.5692d8dea9be.Ib1882b2c2f0b0603abc4b7d4a0ecc45cd1fbf9a7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: add sta handling flows for MLD modeMiri Korenblit
In MLD mode we have a new STA cmd. As a result, it is also changes the flows of adding/updating/removing and handling state of a station. Add these flows. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230328104948.b5548cfd8fe3.I70f9c8f3c95e18d5c9af0a5681e0830893509531@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: sta preparation for MLOGregory Greenman
Split iwl_mvm_sta into general and link specific parts. As a first step, all link dependent parameters reside in deflink. The change was done mostly using the spatch below with some manual adjustments. @iwl_mvm_sta@ struct iwl_mvm_sta *s; identifier var = {sta_id, lq_sta, avg_energy}; @@ ( s-> - var + deflink.var ) Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230328104948.34eace06d583.I1f8c5e919a71b21030460fbdd220d42401b688b1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: vif preparation for MLOGregory Greenman
In MLO, some fields of iwl_mvm_vif should be defined in the context of a link. Define a separate structure for these fields and add a deflink object to hold it as part of iwl_mvm_vif. Non-MLO legacy code will use only deflink object while MLO related code will use the corresponding link from the link array. It follows the strategy applied in mac80211 for introducing MLO changes. The below spatch takes care of updating all driver code to access fields separated into MLD specific data structure via deflink (need to convert all references to the fields listed in var to deflink.var and also to take care of calls like iwl_mvm_vif_from_mac80211(vif)->field). @iwl_mld_vif@ struct iwl_mvm_vif *v; struct ieee80211_vif *vv; identifier fn; identifier var = {bssid, ap_sta_id, bcast_sta, mcast_sta, beacon_stats, smps_requests, probe_resp_data, he_ru_2mhz_block, cab_queue, phy_ctxt, queue_params}; @@ ( v-> - var + deflink.var | fn(vv)-> - var + deflink.var ) Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230328104948.4896576f0a9f.Ifaf0187c96b9fe52b24bd629331165831a877691@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-22wifi: iwlwifi: mvm: support enabling and disabling HW timestampingAvraham Stern
Instead of enabling HW timestamping by default every time a station is connected, disable it by default and enable it only upon request for a specific station. HW timestamping can be enabled for only one peer at a time. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230320122330.62b98fbf545b.I450c1017ada7900a71a63d879bb542a08e3166c8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-22wifi: iwlwifi: mvm: refactor iwl_mvm_add_sta(), iwl_mvm_rm_sta()Miri Korenblit
As we have a new MLD STA cmd, there will be a different function to add/remove a station in MLD mode. But both functions will share a common part. Put this part in a separate function which will be used later in adding/removing a sta in MLD mode. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230320122330.d01e0c9ccdc3.I5e9e27c3b363b36209a0ff960d2e59708e7ff0bf@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-22wifi: iwlwifi: mvm: remove not needed initializationsMiri Korenblit
In iwl_mvm_add_sta() we're initializing the new allocated mvm_sta. We are setting some fields to zero even though it was allocated with kzalloc, for the case of HW restart. But in such a case we will never get to this initializations due to the goto statement that we have in this case. Remove these initializations. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230320122330.c0b4d1e986a5.I6959bf1aca74c865e3c1edbf711f5fe8fb8c0c9f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-22wifi: iwlwifi: mvm: refactor iwl_mvm_sta_send_to_fw()Miri Korenblit
We have a new STA cmd as part of the new MLD API. There are some parts of sending the STA cmd which are common to both the old and the new one. Put this parts in functions which will later be used to send the new STA cmd. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230320122330.4da940bd7384.I3a66990fbffe9611b5e41f3686c2aff37ba2eb56@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-22wifi: iwlwifi: mvm: report hardware timestamps in RX/TX statusAvraham Stern
For TM/FTM frames, report the hardware timestamps reported by the fw as part of the RX/TX status. Since the fw reports the timestamps in a dedicated notification (and not as part of the RX/TX status), hold the frame until the fw timestamps notification is received. Timestamping is enabled when a station is connected and disabled when disconnected. For AP interface, only the first station will have timestamping enabled since the fw only supports timestamping for one peer. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230320122330.e0392d498101.I9bf12c8ecfb3f17253a13dc48a48647ddd6e7855@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-22wifi: iwlwifi: mvm: protect TXQ list manipulationJohannes Berg
Some recent upstream debugging uncovered the fact that in iwlwifi, the TXQ list manipulation is racy. Introduce a new state bit for when the TXQ is completely ready and can be used without locking, and if that's not set yet acquire the lock to check everything correctly. Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Tested-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-22wifi: iwlwifi: mvm: fix mvmtxq->stopped handlingJohannes Berg
This could race if the queue is redirected while full, then the flushing internally would start it while it's not yet usable again. Fix it by using two state bits instead of just one. Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Tested-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-15wifi: iwlwifi: mvm: Add a remove_interface() callback for mld modeMiri Korenblit
As the MLD mode and its new APIs are introduced, we've decided to add a new ieee80211_ops dedicated for MLD callbacks. Add the MLD remove_interface() callback which uses the new MLD APIs. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230314194113.b87c5c0a4b6b.I631173a73d6ffd7232aa539ea8b356a222fac398@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-15wifi: iwlwifi: mvm: add support for the new STA related commandsMiri Korenblit
As a part of the new MLD FW API changes, we have new commands for STA related operations (add/remove/aux/disable tx). Add structures and enum definitions, along with part of the functions that sends this commands. This functions will be in used and more will be added in the next patches. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230314194113.132873ce015c.I7b12a77e5be066730762e6ceeeaa7190293c3df1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-15wifi: iwlwifi: mvm: avoid sta lookup in queue allocJohannes Berg
In FW restart scenarios, we allocate the queues from the iwl_mvm_realloc_queues_after_restart() function, but that is called before we insert the station ID into our map (mvm->fw_id_to_mac_id). However, in all cases where we're actually allocating a queue for a "real" (not bcast, aux, ...) station we have the sta pointer already, so just pass it along to use it instead of looking it up. This fixes an issue where after restart we only allocated a queue of size 16 (due to the ordering issue described above), and thus never got good throughput again since no aggregates could be formed on transmit. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230314194113.4d70868003e8.I3476fee5c12f5b1af2be5e2f38a9df7d66d02b62@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-12-25treewide: Convert del_timer*() to timer_shutdown*()Steven Rostedt (Google)
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-07wifi: iwlwifi: modify new queue allocation commandJohannes Berg
Follow a new firmware API changes and update the queue allocation command in the remove/modify cases to take the station mask and TID instead of the queue ID. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221205102808.2925b38d3929.Ib8467711590c1969817c3321509eb131f4230e15@changeid
2022-11-10wifi: iwlwifi: mvm: support new key APIJohannes Berg
In order to support MLD, the key API is also changing to have station masks instead of just the station ID etc. Change the driver to support this, and add the new code in a new file so it's more clearly separated. For now this isn't separated at the mac80211 ops level, which we wanted to do, but we're calling these functions in a place when pre-start keys are installed in iwl_mvm_start_ap_ibss(), and the function has some glue logic to mac80211. We may want to change that later. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20221102165239.ed9ccd814abc.Iacc7360de68807fbac19e5b67c86504b39cc15df@changeid
2022-10-11wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue (other ↵Jose Ignacio Tornos Martinez
cases) BUGs like this are still reproducible: [ 31.509616] list_add corruption. prev->next should be next (ffff8f8644242300), but was ffff8f86493fd300. (prev=ffff8f86493fd300). [ 31.521544] ------------[ cut here ]------------ [ 31.526248] kernel BUG at lib/list_debug.c:30! [ 31.530781] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 31.535831] CPU: 1 PID: 626 Comm: wpa_supplicant Not tainted 6.0.0+ #7 [ 31.542450] Hardware name: Dell Inc. Inspiron 660s/0478VN , BIOS A07 08/24/2012 [ 31.550484] RIP: 0010:__list_add_valid.cold+0x3a/0x5b [ 31.555537] Code: f2 4c 89 c1 48 89 fe 48 c7 c7 28 20 69 89 e8 4c e3 fd ff 0f 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 d0 1f 69 89 e8 35 e3 fd ff <0f> 0b 4c 89 c1 48 c7 c7 78 1f 69 89 e8 24 e3 fd ff 0f 0b 48 c7 c7 [ 31.574605] RSP: 0018:ffff9f6f00dc3748 EFLAGS: 00010286 [ 31.579990] RAX: 0000000000000075 RBX: ffff8f8644242080 RCX: 0000000000000000 [ 31.587155] RDX: 0000000000000201 RSI: ffffffff8967862d RDI: 00000000ffffffff [ 31.594482] RBP: ffff8f86493fd2e8 R08: 0000000000000000 R09: 00000000ffffdfff [ 31.601735] R10: ffff9f6f00dc3608 R11: ffffffff89f46128 R12: ffff8f86493fd300 [ 31.608986] R13: ffff8f86493fd300 R14: ffff8f8644242300 R15: ffff8f8643dd3f2c [ 31.616151] FS: 00007f3bb9a707c0(0000) GS:ffff8f865a300000(0000) knlGS:0000000000000000 [ 31.624447] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 31.630286] CR2: 00007fe3647d5600 CR3: 00000001125a6002 CR4: 00000000000606e0 [ 31.637539] Call Trace: [ 31.639936] <TASK> [ 31.642143] iwl_mvm_mac_wake_tx_queue+0x71/0x90 [iwlmvm] [ 31.647569] ieee80211_queue_skb+0x4b6/0x720 [mac80211] ... So, it is necessary to extend the applied solution with commit 14a3aacf517a9 ("iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue") to all other cases where the station queues are invalidated and the related lists are not emptied. Because, otherwise as before, if some new element is added later to the list in iwl_mvm_mac_wake_tx_queue, it can match with the old one and produce the same commented BUG. That is, in order to avoid this problem completely, we must also remove the related lists for the other cases when station queues are invalidated. Fixes: cfbc6c4c5b91c ("iwlwifi: mvm: support mac80211 TXQs model") Reported-by: Petr Stourac <pstourac@redhat.com> Tested-by: Petr Stourac <pstourac@redhat.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221010081611.145027-1-jtornosm@redhat.com
2022-09-06wifi: mac80211: make smps_mode per-linkBenjamin Berg
The SMPS power save mode needs to be per-link rather than being shared for all links. As such, move it into struct ieee80211_link_sta. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-27wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queueJose Ignacio Tornos Martinez
After successfull station association, if station queues are disabled for some reason, the related lists are not emptied. So if some new element is added to the list in iwl_mvm_mac_wake_tx_queue, it can match with the old one and produce a BUG like this: [ 46.535263] list_add corruption. prev->next should be next (ffff94c1c318a360), but was 0000000000000000. (prev=ffff94c1d02d3388). [ 46.535283] ------------[ cut here ]------------ [ 46.535284] kernel BUG at lib/list_debug.c:26! [ 46.535290] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 46.585304] CPU: 0 PID: 623 Comm: wpa_supplicant Not tainted 5.19.0-rc3+ #1 [ 46.592380] Hardware name: Dell Inc. Inspiron 660s/0478VN , BIOS A07 08/24/2012 [ 46.600336] RIP: 0010:__list_add_valid.cold+0x3d/0x3f [ 46.605475] Code: f2 4c 89 c1 48 89 fe 48 c7 c7 c8 40 67 93 e8 20 cc fd ff 0f 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 70 40 67 93 e8 09 cc fd ff <0f> 0b 48 89 fe 48 c7 c7 00 41 67 93 e8 f8 cb fd ff 0f 0b 48 89 d1 [ 46.624469] RSP: 0018:ffffb20800ab76d8 EFLAGS: 00010286 [ 46.629854] RAX: 0000000000000075 RBX: ffff94c1c318a0e0 RCX: 0000000000000000 [ 46.637105] RDX: 0000000000000201 RSI: ffffffff9365e100 RDI: 00000000ffffffff [ 46.644356] RBP: ffff94c1c5f43370 R08: 0000000000000075 R09: 3064316334396666 [ 46.651607] R10: 3364323064316334 R11: 39666666663d7665 R12: ffff94c1c5f43388 [ 46.658857] R13: ffff94c1d02d3388 R14: ffff94c1c318a360 R15: ffff94c1cf2289c0 [ 46.666108] FS: 00007f65634ff7c0(0000) GS:ffff94c1da200000(0000) knlGS:0000000000000000 [ 46.674331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 46.680170] CR2: 00007f7dfe984460 CR3: 000000010e894003 CR4: 00000000000606f0 [ 46.687422] Call Trace: [ 46.689906] <TASK> [ 46.691950] iwl_mvm_mac_wake_tx_queue+0xec/0x15c [iwlmvm] [ 46.697601] ieee80211_queue_skb+0x4b3/0x720 [mac80211] [ 46.702973] ? sta_info_get+0x46/0x60 [mac80211] [ 46.707703] ieee80211_tx+0xad/0x110 [mac80211] [ 46.712355] __ieee80211_tx_skb_tid_band+0x71/0x90 [mac80211] ... In order to avoid this problem, we must also remove the related lists when station queues are disabled. Fixes: cfbc6c4c5b91c ("iwlwifi: mvm: support mac80211 TXQs model") Reported-by: Takayuki Nagata <tnagata@redhat.com> Reported-by: Petr Stourac <pstourac@redhat.com> Tested-by: Petr Stourac <pstourac@redhat.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220719153542.81466-1-jtornosm@redhat.com
2022-06-20wifi: mac80211: move interface config to new structJohannes Berg
We'll use bss_conf for per-link configuration later, so move out all the non-link-specific data out into a new struct ieee80211_vif_cfg used in the vif. Some adjustments were done with the following spatch: @@ expression sdata; struct ieee80211_vif *vifp; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ ( -sdata->vif.bss_conf.var +sdata->vif.cfg.var | -vifp->bss_conf.var +vifp->cfg.var ) @bss_conf@ struct ieee80211_bss_conf *bss_conf; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ -bss_conf->var +vif_cfg->var (though more manual fixups were needed, e.g. replacing "vif_cfg->" by "vif->cfg." in many files.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-22wifi: iwlwifi: use unsigned to silence a GCC 12 warningJakub Kicinski
GCC 12 says: drivers/net/wireless/intel/iwlwifi/mvm/sta.c:1076:37: warning: array subscript -1 is below array bounds of ‘struct iwl_mvm_tid_data[9]’ [-Warray-bounds] 1076 | if (mvmsta->tid_data[tid].state != IWL_AGG_OFF) | ~~~~~~~~~~~~~~~~^~~~~ Whatever, tid is a bit from for_each_set_bit(), it's clearly unsigned. Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11mac80211: prepare sta handling for MLO supportSriram R
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-18iwlwifi: mvm: update BAID allocation command againJohannes Berg
Due to some issues found in integration, the command now has the (old) station mask and TID in modify/remove instead of the BAID, adjust accordingly. Since we don't use modify yet (and never will with v1 of the API), just add v1 remove inside the existing union, and use that, this way we don't have to duplicate everything, only the remove code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220210181930.bc424f15cc4b.I06d9acae11dc69b2500666f497017a3fd4e2acd5@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: support new queue allocation commandJohannes Berg
Newer firmware versions will support a new queue allocation command, in order to deal with MLD where multiple stations are used for a single queue. Add support for the new command. This requires some refactoring of the queue allocation API, which now gets - the station mask instead of the station ID - the flags without the "enable" flag, since that's no longer used in the new API Additionally, this new API now requires that we remove queues before removing a station, the firmware will no longer do that internally. Also add support for that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220210181930.acbf22ac2b66.I2bf38578c5ca1f7ffb2011a782f772db92fc4965@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: mvm: remove iwl_mvm_disable_txq() flags argumentJohannes Berg
It's always zero, just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220210181930.dc67b3c04d0f.I5fbc552812ab91f2c4b158eee39f63c44575db1b@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: remove command ID argument from queue allocationJohannes Berg
The command ID here is always hard-coded to the same, so we can remove it. In the future we actually need to make this configurable, but that doesn't need to be on each call, it can be done through the transport configuration. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220210181930.8b352828f767.Ice4c91d8ea3e207914104e72801b87cd7f409ba7@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: mvm: make iwl_mvm_reconfig_scd() staticJohannes Berg
There's no need to have this in a different place, it's only used in a single C file (sta.c). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220205112029.699b4b9c2232.I0d7970d800a51fee5135946ee03a7d9e8a811893@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 03:50:34 +0000