summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm/rx.c
AgeCommit message (Collapse)Author
2023-06-19wifi: iwlwifi: mvm: Validate tid is in valid range before using itAnjaneyulu
Validate tid is less then MAX TID when it is used to access corresponding arrays. Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123447.cea75e1f57e7.I03bc0a81d2c1bdbf4784c12c4c62b8538892ccba@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: don't drop unencrypted MCAST framesAyala Beker
MCAST frames are filtered out by the driver if we are not authorized yet. Fix it to filter out only protected frames. Fixes: 147eb05f24e6 ("iwlwifi: mvm: always tell the firmware to accept MCAST frames in BSS") Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.9cedcc27db60.I8fb7057981392660da482dd215e85c15946d3f4b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: sta preparation for MLOGregory Greenman
Split iwl_mvm_sta into general and link specific parts. As a first step, all link dependent parameters reside in deflink. The change was done mostly using the spatch below with some manual adjustments. @iwl_mvm_sta@ struct iwl_mvm_sta *s; identifier var = {sta_id, lq_sta, avg_energy}; @@ ( s-> - var + deflink.var ) Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230328104948.34eace06d583.I1f8c5e919a71b21030460fbdd220d42401b688b1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: vif preparation for MLOGregory Greenman
In MLO, some fields of iwl_mvm_vif should be defined in the context of a link. Define a separate structure for these fields and add a deflink object to hold it as part of iwl_mvm_vif. Non-MLO legacy code will use only deflink object while MLO related code will use the corresponding link from the link array. It follows the strategy applied in mac80211 for introducing MLO changes. The below spatch takes care of updating all driver code to access fields separated into MLD specific data structure via deflink (need to convert all references to the fields listed in var to deflink.var and also to take care of calls like iwl_mvm_vif_from_mac80211(vif)->field). @iwl_mld_vif@ struct iwl_mvm_vif *v; struct ieee80211_vif *vv; identifier fn; identifier var = {bssid, ap_sta_id, bcast_sta, mcast_sta, beacon_stats, smps_requests, probe_resp_data, he_ru_2mhz_block, cab_queue, phy_ctxt, queue_params}; @@ ( v-> - var + deflink.var | fn(vv)-> - var + deflink.var ) Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230328104948.4896576f0a9f.Ifaf0187c96b9fe52b24bd629331165831a877691@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: mvm: clean up duplicated definesMordechay Goodstein
VHT, HE and EHT rates use the same bits for NSS, so no need for defines per PHY version. Also use spatch to replace bit manipulation with FIELD_GET: @@ identifier rate; @@ -((rate & RATE_MCS_NSS_MSK) >> RATE_MCS_NSS_POS) +FIELD_GET(RATE_MCS_NSS_MSK, rate) Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.167ed9477aa8.Ibd8e71d31896e8d8f067ce4e3a6e9a0e86c78f3f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: reduce verbosity of some logging eventsGolan Ben Ami
These are cases in which we'd like to warn that something unexpected happened but they may not be errors. Reduce verbosity. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.5eea0f58a74f.Ifb6b35903a5a452a757bfe50b6a7e58b3fd2ef23@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-18iwlwifi: mvm: always tell the firmware to accept MCAST frames in BSSEmmanuel Grumbach
Make the firmware's life easier and always accept MCAST frames. If needed, drop them in the driver. We need to filter out MCAST frames in order not to have false positives in the decryption check. If we accept MCAST frames before we have the GKT installed, we'll end up complaining that we can't decrypt the frame. Implement the same filtering, but in the driver. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20220517120045.479956a46317.I21fac7ede9eca85a662671d694872898df884f0b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-18iwlwifi: mvm: fix off by one in iwl_mvm_stat_iterator_all_macs()Dan Carpenter
Change the comparison from ">" to ">=" to avoid accessing one element beyond the end of the ->per_mac_stats[] array. Fixes: 6324c173ff4a ("iwlwifi: mvm: add support for statistics update version 15") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220106071825.GA5836@kili Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: avoid void pointer arithmeticJohannes Berg
Avoid void pointer arithmetic since it's technically undefined and causes warnings in some places that use our code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220128153014.e349104ecd94.Iadc937f475158b9437becdfefb361a97e7eaa934@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-07iwlwifi: mvm: add support for statistics update version 15Mordechay Goodstein
The main changes are remove the respond from STATISTICS_CMD and sending it with STATISTICS_NOTIFICATION, and updating for all mac id's and phy id's in one notification. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.832c7b599202.If192dce8f51ec13005999c3ff96fe09a73cd8f91@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: update definitions due to new rate & flagsMiri Korenblit
As a part of preparing to the new rate & flags version Update the relevant definitions and use them. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.5862bf4f14c4.Ib476b5443faa085539b79d49a0aebd81a213b42f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Remove antenna c referencesMiri Korenblit
Since antenna c is not in use and won't be relevant after the new rate & flags, remove all it's references Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017113927.5e39106ec75b.I4281edc844f734bf9591396a5cc8009ad37ccda8@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-05iwlwifi: mvm: check more notification sizesJohannes Berg
Some notifications aren't handled by the general RX handler code, due to multi-queue. Add size checks for them explicitly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210117130510.1370c776cb31.Ic536bd1aee5368969fbf65db85b9b9b5dc9c6034@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-05iwlwifi: mvm: add notification size checksJohannes Berg
We shouldn't trust the firmware with the sizes (or contents) of notifications, accessing too much data could cause page faults if the data doesn't fit into the allocated space. This applies more on older NICs where multiple notifications can be in a single RX buffer. Add a general framework for checking a minimum size of any notification in the RX handlers and use it for most. Some RX handlers were already checking and I've moved the checks, some more complex checks I left and made them _NO_SIZE for the RX handlers. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210117130510.3e155d5e5f90.I2121fa4ac7cd7eb98970d84b793796646afa3eed@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-11iwlwifi: mvm: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly using the fallthrough pseudo-keyword as a replacement for a number of "fall through" markings. Notice that Clang doesn't recognize "fall through" comments as implicit fall-through. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201117135053.GA13248@embeddedor
2020-12-10iwlwifi: mvm: check that statistics TLV version match struct versionMordechay Goodstein
FW now puts in the struct version, the TLV version so we also check it to make sure it matches. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.bc1dfb56ffbd.I99d8085cccc8687805781ccc43e189dbcef0e63b@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: tighten RX MPDU bounds checksJohannes Berg
Previously, we added checks that the contained MPDU size is long enough, but really we should also check that the notification itself fits into the data. Add some checks for that. Also add unlikely() annotations on the previously added checks. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.51cc04cf1e3e.I7bfd6809f8f5feb75f79397646e6656e95688a0e@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: use SPDX tagsJohannes Berg
Use SPDX tags instead of the long copyright notices. Also cleanup some duplicate copyright notices and combine the years where possible. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: validate MPDU length against notification lengthJohannes Berg
The MPDU contained in a notification shouldn't be larger than the notification size itself is, validate this. Reported-by: Haggai Abramovsky <haggai.abramovsky@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.7c721ad37014.Id5746874ecfa208b60baa62691b2d9dc5dd4d89c@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: mvm: iterate active stations when updating statisticsMordechay Goodstein
Instead of enumerating all possible stations iterate only active ones. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.c049de5611b4.Ic35b8d1a328903195ec7cb887a9cb198b7d8f856@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-08iwlwifi: stats: add new api fields for statistics cmd/ntfyMordechay Goodstein
The new API uses TLV format for statistics to enable fast changes and debug on the fly. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.a45fd1a34a39.I7709305a6dc7b88d0c5119b12c9251fa6c740262@changeid
2020-10-08iwlwifi: mvm: get number of stations from TLVNathan Errera
FW is changing the max number of supported stations. To adapt to the change we get the max number from the TLV and act according to the new number. Signed-off-by: Nathan Errera <nathan.errera@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.863ab470babc.I393223392f36436663c4e66add03fefe77b74e60@changeid
2020-04-21iwlwifi: mvm: beacon statistics shouldn't go backwardsMordechay Goodstein
We reset statistics also in case that we didn't reassoc so in this cases keep last beacon counter. Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.1f9142751fbc.Ifbfd0f928a0a761110b8f4f2ca5483a61fb21131@changeid
2019-11-15iwlwifi: mvm: fix unaligned read of rx_pkt_statusWang Xuerui
This is present since the introduction of iwlmvm. Example stack trace on MIPS: [<ffffffffc0789328>] iwl_mvm_rx_rx_mpdu+0xa8/0xb88 [iwlmvm] [<ffffffffc0632b40>] iwl_pcie_rx_handle+0x420/0xc48 [iwlwifi] Tested with a Wireless AC 7265 for ~6 months, confirmed to fix the problem. No other unaligned accesses are spotted yet. Signed-off-by: Wang Xuerui <wangxuerui@qiniu.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-06iwlwifi: remove all the d0i3 referencesEmmanuel Grumbach
As part of the d0i3 removal. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-22timekeeping: Use proper clock specifier names in functionsJason A. Donenfeld
This makes boot uniformly boottime and tai uniformly clocktai, to address the remaining oversights. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/20190621203249.3909-2-Jason@zx2c4.com
2019-02-04iwlwifi: mvm: add fall through comments where neededLuca Coelho
Some switch-cases were missing a fall through comment, so the compiler may warn. Fix that by adding the comments where needed. In other cases there was more text in the comment, which the compiler doesn't recognize, so either remove the extra text or move it to a separate comment line as appropriate. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: mvm: fix firmware statistics usageEmmanuel Grumbach
The new (CDB) statistics API is used by non-CDB devices as well. Look at the right TLV flag to know which version of the statistics notification to use. To avoid confusion, remove the _cdb suffix from the structure name. While at it, remove a structure that was never used. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: 678d9b6dddea ("iwlwifi: mvm: update rx statistics cmd api") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: mvm: don't check if a pointer is set if it can't be unsetEmmanuel Grumbach
We used to have many versions of statistics notification coming from the firmware. In one of the cleanup patches, we forgot to clean the code that checks if data->general is set. Since it is always set, remove the check. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-06iwlwifi: dbg: group trigger condition to helper functionSara Sharon
The triplet of get trigger, is trigger enabled and is trigger stopped repeats itself. Group them in a function to avoid code duplication. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: remove all occurrences of the FSF address paragraphLuca Coelho
The Free Software Foundation address is superfluous and causes checkpatch to issue a warning when present. Remove all paragraphs with FSF's address to prevent that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: detect U-APSD breaking aggregationJohannes Berg
Try to detect that the AP is not using aggregation even when there's enough traffic to make it worthwhile; if this is the case and U-APSD is enabled then assume the AP is broken (like so many) and doesn't enable aggregation when U-APSD is used. In this case, disconnect from the AP and blacklist U-APSD for a potential new connection to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: add traffic condition monitoring (TCM)Luca Coelho
Traffic condition monitor gathers data about the traffic load and other conditions and can be used to make decisions regarding latency, throughput etc. This patch introduces the code and data structures to collect this data for future use. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-20iwlwifi: mvm: support RX flags API changeSara Sharon
Latest firmware calculates both phases of the TKIP field, so the TTAK ok flag is not needed and deprecated. Support this API change. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-05iwlwifi: mvm: rs: introduce new API for rate scalingGregory Greenman
New devices will have rate scaling algorithm running in the firmware. With this feature, the driver's responsiblity is to provide an initial configuration and to handle notifications regarding recent rates and some other parameters. Debugfs hooks will be still available for reading the current rate/statistics and setting a fixed rate. The old API is supported so far, though both APIs cannot be used simultaneously. This is the first patch in the series. It adds a new TLV specifying FW support for the new API and updates lq_sta to support two types of rate scaling. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-25iwlwifi: mvm: check for short GI only for OFDMSara Sharon
This bit will be used in CCK to indicate short preamble. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo
Mark Brown reported that there are conflicts in iwlwifi between the two trees so fix those now.
2017-10-06iwlwifi: mvm: warn on invalid statistics sizeJohannes Berg
Getting the wrong statistics size is a problem, having a warning will help us catch it quicker during firmware/driver development. In released firmware/driver versions, we obviously make sure this won't happen. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-06iwlwifi: mvm: do not print security error in monitor modeShaul Triebitz
In monitor mode we are not expected to decrypt encrypted packets (not having the keys). Hence we are expected to get an unknown rx security status. Keeping the print in monitor mode causes a print for each captured packet flooding the dmesg. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: refactor firmware debug codeJohannes Berg
Split out the firmware debug code to be more general, so that it can be used by different subdrivers. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-29iwlwifi: mvm: update rx statistics cmd apiLiad Kaufman
The API has changed - update the code. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28Merge tag 'mac80211-next-for-davem-2017-04-28' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Another set of patches for -next: * API support for concurrent scheduled scan requests * API changes for roaming reporting * BSS max idle support in mac80211 * API changes for TX status reporting in mac80211 * API changes for RX rate reporting in mac80211 * rewrite monitor logic to prepare for BPF filters * bugfix for rare devices without 2.4 GHz support * a bugfix for recent DFS changes * some further cleanups The API changes are actually at a nice time, since it's typically quiet just before the merge window, and trees can be synchronized easily during it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28mac80211: rename ieee80211_rx_status::vht_nss to just nssJohannes Berg
This field will need to be used again for HE, so rename it now. Again, mostly done with this spatch: @@ expression status; @@ -status->vht_nss +status->nss @@ expression status; @@ -status.vht_nss +status.nss Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: separate encoding/bandwidth from flagsJohannes Berg
We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: clean up rate encoding bits in RX statusJohannes Berg
In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-25iwlwifi: mvm: support new rate flagsSara Sharon
Rates were changed to adapt to HE. Change is backward compatible. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19iwlwifi: mvm: dump frames early on invalid rateSara Sharon
Currently when rate isn't found (invalid rate or CCK rate in high band) driver is assigning rate -1, which causes mac80211 to dump it later with the cryptic rate value of 0xFF. Instead, warn early and dump the frame in mvm. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19iwlwifi: mvm: remove unnecessary label in iwl_mvm_handle_rx_statistics()Luca Coelho
The "invalid" label was a bit ugly and unnecessary. Remove it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19iwlwifi: mvm: move new API code to the endGoodstein, Mordechay
By moving all the code that depends on the new API we avoid unnecessary indentation in the code. Signed-off-by: Mordechai Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 00:25:30 +0000