summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c
AgeCommit message (Collapse)Author
2019-04-29iwlwifi: mvm: limit TLC according to our HE capabilitiesLiad Kaufman
Instead of setting the TLC config command according to the rates the peer supports, make sure that we aren't also limited by our own rates, so take the minimum between the peer's supported RX rates and our supported TX rates. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-19iwlwifi: rs: consider LDPC capability in case of HEGregory Greenman
When building TLC configuration command, consider in case of HE, if LDPC support is turned on in our capabilities. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: mvm: set max amsdu for TLC offloadMordechay Goodstein
mac80211 sets max amsdu to min supported ht vs vht but TLC only works with one mode so we can set to the exact mode used (vht/ht) and enable larger amsdu sizes for vht. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: mvm: support mac80211 AMSDUSara Sharon
Support getting mac80211 building AMSDUs for us. Remove GSO support from mvm - we don't need it anymore. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: mvm: fix wrong DCM TLC configShaul Triebitz
When configuring TLC DCM flag: 1. check the peer's RX DCM capabilities (since we TX) 2. do not set DCM_NSS_2 since we do not support it Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Fixes: 423584dd8060 ("iwlwifi: rs-fw: support dcm") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11iwlwifi: fw: do not set sgi bits for HE connectionNaftali Goldstein
If the association supports HE, HT/VHT rates will never be used for Tx and therefore there's no need to set the sgi-per-channel-width-support bits, so don't set them in this case. Fixes: 110b32f065f3 ("iwlwifi: mvm: rs: add basic implementation of the new RS API handlers") Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: rs-fw: support dcmNaftali Goldstein
Add flags to the tlc_cfg_cmd for signaling peer support for receiving Dual Carrier Modulation at BPSK (MCS 0), and set them according to peer capabilities. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: rs-fw: enable STBC in he correctlyNaftali Goldstein
In the HE phy capabilities IE there are 2 bits to signal support for STBC in bandwidths of 80Mhz or less, and of 160Mhz. Use these bits to determine STBC support if this IE exists. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: always init rs_fw with 20MHz bandwidth ratesNaftali Goldstein
As with the non-offloaded rs case, during assoc on the ap side the phy context is set to 20MHz until authorization of a client that supports wider channel-widths. Support this by sending the initial tlc_config_cmd with max supported channel width of 20MHz until authorization succeeds. Fixes: 6b7a5aea71b3 ("iwlwifi: mvm: always init rs with 20mhz bandwidth rates") Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: add support for IEEE802.11axLuca Coelho
Add support for the HE in the iwlwifi driver conforming with P802.11ax_D2.0. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: update rs-fw APINaftali Goldstein
Update rs-fw API to match changes in FW. Specifically, the TLC_MNG_NOTIF_REQ_CMD command and TLC_MNG_AMSDU_ENABLE_NOTIF notification are removed, the A-MSDU related info is received from FW via the TLC_MNG_UPDATE_NOTIF, and the TLC_MNG_CONFIG_CMD uses version 2 of its data structure. Additionally, constify some arguments in a couple of functions. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: support offload of AMSDU rate controlGregory Greenman
Support the new APIs and activate AMSDU based on the offloaded TLC decisions. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: mvm: take RCU lock before dereferencingSara Sharon
RCU isn't properly locked. Fixes: 46d372af9935 ("iwlwifi: mvm: rs: new rate scale API - add FW notifications") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-08iwlwifi: mvm: fix wrong #ifdef that uses a macro from backportsLuca Coelho
I accidentally pushed a patch with CPTCFG (which is used in the backports project) to the rs-fw.c file. Fix that to use CONFIG instead. Fixes: 9f66a397c877 ("iwlwifi: mvm: rs: add ops for the new rate scaling in the FW") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-05iwlwifi: mvm: rs: new rate scale API - add FW notificationsGregory Greenman
This patch sends to the FW notification configuration command and handles the update responses. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-05iwlwifi: mvm: rs: add basic implementation of the new RS API handlersGregory Greenman
This patch adds rate scaling configuration command and implements a few other handlers. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-05iwlwifi: mvm: rs: add ops for the new rate scaling in the FWGregory Greenman
This patch introduces a new instance of rate_control_ops for the new API (adding only empty stubs here and the subsequent patches in the series will fill in the implementation). The decision which API to use is done during the register step according to FW TLV. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>