summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
AgeCommit message (Collapse)Author
2024-06-28wifi: mac80211: remove DEAUTH_NEED_MGD_TX_PREPJohannes Berg
This flag is annoying because it puts a lot of logic into mac80211 that could just as well be in the driver (only iwlmvm uses it) and the implementation is also broken for MLO. Remove the flag in favour of calling drv_mgd_prepare_tx() without any conditions even for the deauth-while-assoc case. The drivers that implement it can take the appropriate actions, which for the only user of DEAUTH_NEED_MGD_TX_PREP (iwlmvm) is a bit more tricky than the implementation in mac80211 is anyway, and all others have no need and can just exit if info->was_assoc is set. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240627132527.94924bcc9c9e.I328a219e45f2e2724cd52e75bb9feee3bf21a463@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: fix prototype mismatch kernel-doc warningsJohannes Berg
Fix all the prototype mismatch and "wrong kernel-doc identifier" warnings, due to typos in or misformatting of the kernel-doc. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240625194805.6ec65cf9b88c.I7804114d7369f352e80a0e8430f7119af8e210de@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: mvm: remove init_dbg module parameterMiri Korenblit
This is no longer used Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20240625194805.17a1484f2485.I095c7482ac517111081f8ff40312b48ffdd7ff94@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID checkJohannes Berg
The lookup function iwl_mvm_rcu_fw_link_id_to_link_conf() is normally called with input from the firmware, so it should use IWL_FW_CHECK() instead of WARN_ON(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240625194805.4ea8fb7c47d4.I1c22af213f97f69bfc14674502511c1bc504adfb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: remove MVM prefix from scan APIDaniel Gabay
These are not MVM specific. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240625194805.09f672318944.Idffeab6a4dfc12effebd1c50815ae5c540afca74@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: mvm: rename 'pldr_sync'Johannes Berg
PLDR (product level device reset) is a Windows term, and is something the driver triggers there, AFAICT. Really what 'pldr_sync' here wants to capture is whether or not the firmware will/may do a product reset during initialization, which makes the device drop off the bus, requiring a rescan. If this is the case, obviously the init will fail/time out, so we don't want to report all kinds of errors etc., hence this tracking variable. Rename it to 'fw_product_reset' to capture the meaning better. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618194245.ccf849642af8.I01dded6b2393771b7baf8b4b17336784d987c7c2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: support fast resumeEmmanuel Grumbach
This will allow to suspend / resume the system without resetting the firmware. This will allow to reduce the resume time. In case the fast_resume fails, stop the device and bring it up from scratch. Raise the timeout for the D3_END notification since in some iterations, it took 240ms. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618194245.03b8d2801044.I613d17c712de7a0d611cde4e14f37ebbe0c3c964@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: fix iwl_mvm_get_valid_rx_ant()Daniel Gabay
Fix incorrect use of _tx_ valid ant data in the function. Fixes: 4ea1ed1d14d8 ("wifi: iwlwifi: mvm: support set_antenna()") Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618200104.b7c6a320c7dc.I3092eb5275056f2162b9694e583c310c38568b2a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: inform the low level if drv_stop() is a suspendEmmanuel Grumbach
This will allow the low level driver to take different actions for different flows. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: iwlwifi: mvm: use ROC for P2P device activitiesShaul Triebitz
This is the first step towards removing the P2P Device MAC. Use ROC (which uses the AUX MAC) for P2P Device discoveribility and action frames. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240605140556.8c90e457abbd.I8e340759ecb299e05b1809f3d8060429c6cbbd01@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-12wifi: iwlwifi: mvm: separate non-BSS/ROC EMLSR blockingJohannes Berg
If non-BSS and remain-on-channel (ROC) blocking were to occur simultaneously, they'd step on each other's toes, unblocking when not yet supported. Disentangle these bits, and ROC doesn't need to use the non_bss_link() function then. Fixes: a1efeb823084 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240605140556.461fcf7b95bb.Id0d21dcb739d426ff15ec068b5df8abaab58884d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-10Merge tag 'wireless-next-2024-06-07' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 The first "new features" pull request for v6.11 with changes both in stack and in drivers. Nothing out of ordinary, except that we have two conflicts this time: net/mac80211/cfg.c https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au drivers/net/wireless/microchip/wilc1000/netdev.c https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au Major changes: cfg80211/mac80211 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers wilc1000 * read MAC address during probe to make it visible to user space iwlwifi * bump FW API to 91 for BZ/SC devices * report 64-bit radiotap timestamp * enable P2P low latency by default * handle Transmit Power Envelope (TPE) advertised by AP * start using guard() rtlwifi * RTL8192DU support ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets * tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits) wifi: ath12k: add hw_link_id in ath12k_pdev wifi: ath12k: add panic handler wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity() wifi: brcm80211: remove unused structs wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type) wifi: ath12k: do not process consecutive RDDM event dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() wifi: rtlwifi: handle return value of usb init TX/RX wifi: rtlwifi: Enable the new rtl8192du driver wifi: rtlwifi: Add rtl8192du/sw.c wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg wifi: rtlwifi: Add rtl8192du/dm.{c,h} wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h} wifi: rtlwifi: Add rtl8192du/rf.{c,h} wifi: rtlwifi: Add rtl8192du/trx.{c,h} wifi: rtlwifi: Add rtl8192du/phy.{c,h} wifi: rtlwifi: Add rtl8192du/hw.{c,h} wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU wifi: rtlwifi: Add rtl8192du/table.{c,h} ... Signed-off-by: Jakub Kicinski <kuba@kernel.org> ==================== Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29wifi: iwlwifi: mvm: always set the TWT IE offsetShaul Triebitz
In beacon template version 14, make sure to always set the TWT IE offset before sending the beacon template command, also in the debugfs inject_beacon_ie path. If the TWT IE does not exist, the offset will be set to zero. Fixes: bf0212fd8faa ("wifi: iwlwifi: mvm: add beacon template version 14") Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512152312.eb27175c345a.If30ef24aba10fe47fd42a7a9703eb8903035e294@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: handle TPE advertised by APJohannes Berg
6 GHz BSS SP client shall respect TX power limits advertised by the AP in TPE elements, send the data to the firmware using the AP_TX_POWER_CONSTRAINTS_CMD command, so do that. Co-developed-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240527190228.32f1e2e1447c.I58ac91c38585362aa42bb4a8a59c7d88e67bc40b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: add an option to use ptp clock for rx timestampAvraham Stern
Add a debugfs option to use the ptp clock time for rx device timestamps. This can be useful to e.g. synchronize multiple NICs or reporting the timestamp in the system clock instead of gp2. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240527190228.b197b4f3f9ed.I578ee916d5f517a2e3a89e890a8ea24065946427@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: iwlwifi: move code from iwl-eeprom-parse to dvmEmmanuel Grumbach
Move code that is DVM only to dvm. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512152312.9a1b6ef116e0.I217a513f544d5288a7760d265f51419e81abfd9d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: iwlwifi: mvm: add mvm-specific guardJohannes Berg
Add and use an mvm-specific guard for the mvm mutex. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512152312.7391425b3af2.I1b109f56753dd3f35602dd2c5cf6e1e35aee313d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: iwlwifi: mvm: don't track used links separatelyJohannes Berg
We track which link is using which FW link ID, so there really isn't a need to separately track which link IDs are in use. Remove that code and check the table when looking for a new link ID to use. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512072733.1a67d8af815f.Ie642c12dce3ab55c688abd9a25918569e83e558a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: iwlwifi: mvm: debugfs: add entry for setting maximum TXOP timeAvraham Stern
Add an entry for setting the maximum TXOP time in microseconds. The configured value can be read from the same entry. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.b8d17a9c1731.I57c33574a61edd68bd0ec1aa7009f31111fd7efe@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: exit EMLSR if secondary link is not usedMiri Korenblit
Exit EMLSR mode if the secondary link is not used enough for Rx/Tx Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240506095953.99ad1d71e9b9.Ide825433488ec809773efdc36937e3089d0012df@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: record and return channel survey informationBenjamin Berg
While doing a passive scan, the firmware will report per-channel survey information. This information is primarily useful for hostapd when doing an ACS (Automatic Channel Selection). Collect this information and add it to the result set when getting the survey information. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.9287591a5999.I54a3f9f6480d3694e67eea1cb4f5853beace2780@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Fix race in scan completionIlan Peer
The move of the scan complete notification handling to the wiphy worker introduced a race between scan complete notification and scan abort: - The wiphy lock is held, e.g., for rfkill handling etc. - Scan complete notification is received but not handled yet. - Scan abort is triggered, and scan abort is sent to the FW. Once the scan abort command is sent successfully, the flow synchronously waits for the scan complete notification. However, as the scan complete notification was already received but not processed yet, this hangs for a second and continues leaving the scan status in an inconsistent state. - Once scan complete handling is started (when the wiphy lock is not held) since the scan status is not an inconsistent state, a warning is issued and the scan complete notification is not handled. To fix this issue, switch back the scan complete notification to be asynchronously handling, and only move the link selection logic to a worker (which was the original reason for the move to use wiphy lock). While at it, refactor some prints to improve debug data. Fixes: 07bf5297d392 ("wifi: iwlwifi: mvm: Implement new link selection algorithm") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.1f484a86324b.I63ed445a47f144546948c74ae6df85587fdb4ce3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: add a debugfs for reading EMLSR blocking reasonsYedidya Benshimol
Add a reading for all active EMLSR blocking reasons for testing purposes. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.6d494a335e81.Ic0fa6a9636e3c1a3b1420e85e704a19d4a56e8d9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: Print EMLSR states nameDaniel Gabay
This is useful for debug instead of looking for the hex value. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.f3509cf652f2.Ic086b6b2132ffe249b3c4bdd24c673ce7fd1b614@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is activeYedidya Benshimol
When there's an active link in a non-station vif, the station vif is not allowed to enter EMLSR Note that blocking EMLSR by calling iwl_mvm_block_esr() we will schedule an exit from EMLSR worker, but the worker cannot run before the activation of the non-BSS link, as ieee80211_remain_on_channel already holds the wiphy mutex. Handle that by explicitly calling ieee80211_set_active_links() to leave EMLSR, and then doing iwl_mvm_block_esr() only for consistency and to avoid re-entering it before ready. Note that a call to ieee80211_set_active_links requires to release the mvm mutex, but that's ok since we still hold the wiphy lock. The only thing that might race here is the ESR_MODE_NOTIF, so this changes its handler to run under the wiphy lock. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.916193759f8a.Idf3a3caf5cdc3e69c81710b7ceb57e87f2de87e4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: exit EMLSR when CSA happensJohannes Berg
If CSA is happening, then exit EMLSR to keep the better link, which is the primary link unless that's doing the CSA with quiet. This is done because we can't transmit the OMN frame on a quiet link, but want to exit EMLSR during CSA for better beacon reception, so we can follow the switch accurately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.3ffff9577f08.I2620971fa5aef789e0d4a588def4c2621e8bed5b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Disable/enable EMLSR due to link's bandwidth/bandYedidya Benshimol
Enable EMLSR when bandwidth settings meet the criteria in both band and width, otherwise disable. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.4e473d4f7f5c.I3adf5619b60bfba8af0cd7eae9dac947419603b6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: consider FWs recommendation for EMLSRMiri Korenblit
FW sends a notification indicating whether activating EMLSR mode is recommended or not. Support the notification and enter EMLSR only if recommended. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.2fd3387882eb.I7a8a5b24658744ed732bfc03b1872c9298483d62@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Activate EMLSR based on traffic volumeMiri Korenblit
Adjust EMLSR activation to account for traffic levels. By tracking the number of RX/TX MPDUs, EMLSR will be activated only when traffic volume meets the required threshold. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.9480f99ac8fc.If9eb946e929a39e10fe5f4638bc8bc3f8976edf1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Always allow entering EMLSR from debugfsMiri Korenblit
EMLSR can't be activated from mac80211. Except for the debugfs, which is intended for testing purposes. Currently we don't allow entering EMLSR from debugfs if EMLSR is blocked, i.e. if mvmvif::esr_disable_reason is not 0. But we need a way to activate EMLSR regardless of the vif being blocked, for testing. Remove the check of esr_disable_reason Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.bc3c24d9e0e6.Iad60e22a0d7e2b2b989051e1140b6dc98bef7bcc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: trigger link selection after exiting EMLSRMiri Korenblit
If the reason for exiting EMLSR was a blocking reason, wait for the corresponding unblocking event: - if there is an ongoing scan - do nothing. Link selection will be triggered at the end of it. - If more than 30 seconds passed since the exit, trigger MLO scan, which will trigger link selection - If less then 30 seconds passed since exit, reuse the latest link selection result If the reason for exiting EMLSR was an exit reason (IWL_MVM_EXIT_*), schedule MLO scan in 30 seconds. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Link: https://msgid.link/20240505091420.6a808c4ae8f5.Ia79605838eb6deee9358bec633ef537f2653db92@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: cleanup EMLSR when BT is active handlingMiri Korenblit
BT Coex disables EMLSR only for a 2.4 GHz link, but doesn't block the vif from using EMLSR with a different link pair. In addition, storing it in mvmvif:disable_esr_reason requires extracting the BT Coex bit before checking if EMLSR is blocked or not for a specific vif. Therefore, change the BT Coex bit to be an exit reason and not a blocker. On link selection, EMLSR mode will be re-calculated for the 2.4 GHz link instead of checking that bit. While at it, move the relevant function declarations to the EMLSR functions area in mvm.h Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.a2e93b67c895.I183a0039ef076613144648cc46fbe9ab3d47c574@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: Don't allow EMLSR when the RSSI is lowMiri Korenblit
If the RSSI of a link is low enough, don't use it for EMLSR. If EMLSR is already active and the RSSI of one of the links gets low, exit EMLSR by deactivating that link. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.73263c000263.Ieb2b18855a2719b5e18ad2fa8a3e855ca4e23938@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: disable EMLSR when we suspend with wowlanYedidya Benshimol
We can't be an EMLSR while suspended with wowlan. De-activate the secondary link upon wowlan entring. Set the blocking reason upon suspension and clear it upon resume. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.6ea884b3f095.I84233cb1c79ba538defafb8ddb983c47f04a400a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: get periodic statistics in EMLSRMiri Korenblit
In EMLSR we need to track the RSSI of both links, and exit if the RSSI of one of the links got too low. For that request the FW to send statistics every 5 seconds when in EMLSR. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.6e19d596d77f.Ica2a75a031b1bced0dc2e18c5d365b5eb0d3ec07@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: don't recompute EMLSR mode in can_activate_linksMiri Korenblit
mac80211 invokes the driver callback drv_can_activate_links() from ieee80211_set_active_links to verify it can activate the desired link combination. However, ieee80211_set_active_links is called with more than one link in 2 cases: - After driver's link selection decided to enter EMLSR - From debugfs, for testing purposes. For both cases there is no need to recompute all the considerations determining whether to activate EMLSR. Instead, only check if the vif is not blocked for EMLSR. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.202cf5a9ef2c.I65e4698b730a8652ad8d1c01420aabb41a1d04fd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: implement EMLSR prevention mechanism.Miri Korenblit
Address scenarios where repeated entry and exit from EMLSR occur, such as encountering missed beacons on a specific link, while still discovering that link during a scan. To mitigate this, introduce the EMLSR prevention mechanism, which operates as follows: - On each exit from EMLSR event, record the timestamp and the exit reason. - If two consecutive exits happen for the same reason within a 400-second window, enforce a 300-second EMLSR prevention. - If a third exit for the same reason occurs within 400 seconds from the second exit, enforce an extended EMLSR prevention of 600 seconds. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.d820ee98b300.I6406db40cf25eabdba602afd783466473b909216@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: exit EMLSR upon missed beaconMiri Korenblit
In case of more than 6 missed beacons on one of the links, exit EMLSR by deactivating that link. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.f9111c79cb53.Ie95ea60149a9bc4367f6b338b37c8635051351ba@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: init vif works only onceJohannes Berg
It's dangerous to re-initialize works repeatedly, especially delayed ones that have an associated timer, and even more so if they're not necessarily canceled inbetween. This can be the case for these workers here during FW restart scenarios, so make sure to initialize it only once. While at it, also ensure it is cancelled correctly. Fixes: f67806140220 ("iwlwifi: mvm: disconnect in case of bad channel switch parameters") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.ddf8eece5eac.I4164f5c9c444b64a9abbaab14c23858713778e35@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: Add helper functions to update EMLSR statusMiri Korenblit
There are reasons for which we need to exit EMLSR, but not to block it completely, and there are reasons for which we need to block EMLSR. For both reason types we have the enum iwl_mvm_esr_state, when the blocking reasons are stored in the `mvmvif::esr_disable_reason` bitmap. This change introduces the APIs to use in the different cases: - iwl_mvm_exit_esr - will exit from EMLSR mode. - iwl_mvm_block_esr - will update the bitmap and exit EMLSR, to be used for the blocking reasons only. - iwl_mvm_unblock_esr - will update the bitmap. To be used for the blocking reasons only. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.d54142a75876.I552926065521f5f848c37b0bd845494bd7865fb7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: Implement new link selection algorithmMiri Korenblit
Replaces the current logic with a new algorithm based on the link grading introduced in a previous patch. The new selection algorithm will be invoked upon successful scan to ensure it has the necessary updated data it needs. This update delegates the selection logic as the primary link determiner in EMLSR mode, storing it in mvmvif to avoid repeated calculations, as the result may vary. Additionally, includes tests for iwl_mvm_valid_link_pair to validate link pairs for EMLSR. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.309fb1b3fe44.I5baf0c293c89a5a28bd1a6386bf9ca6d2bf61ab8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: move EMLSR/links codeMiri Korenblit
The functions that are link related, so they should be in link.c and not in mld-mac80211.c. Move them. Also move the different prototypes to the right place in mvm.h Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.e7c368256fa0.I6b15805a7c8a75d1814f1a829601daf4d3788731@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: check if EMLSR is allowed before selecting linksMiri Korenblit
Currenty iwl_mvm_mld_select_links() doesn't fully check that EMLSR is allowed before selecting the 2 best links. Although it will fail in ieee80211_set_active_links(), it is preferred to avoid the redundent calculations. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.3578a93feb1a.I1cd91608bb73fbe19b8dfdf90e14ce40b98c3430@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: don't always disable EMLSR due to BT coexMiri Korenblit
2.4 GHz/LB (low band) link can't be used in an EMLSR links pair when BT is on. But EMLSR is still allowed for a pair of links which none of them operates in LB. In the existing code, EMLSR will always be disabled if one of the usable links is in LB (and BT is on). Move this check to the code that verifies a specific pair of links, and only if one of these links operates on LB - disable EMLSR. Fixes: 10159a45666b ("wifi: iwlwifi: disable eSR when BT is active") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.2841006b5cc4.I45ffd583f593daa950322852ceb9454cbf497e24@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: calculate EMLSR mode after connectionMiri Korenblit
The function iwl_mvm_can_enter_esr() is (among others) calculating if EMLSR mode is disabled due to BT coex by calling iwl_mvm_bt_coex_calculate_esr_mode(), then stores the decision in mvmvif::esr_disable_reason. But there is no need to calculate this every time iwl_mvm_can_enter_esr is called. Fix this by calculating it once after authorization, and in iwl_mvm_can_enter_esr only check mvmvif::esr_disable_reason. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.a767e243366e.I3b32d36cda23f67dc103a28a9bdccb0039d22574@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: implement link gradingMiri Korenblit
For selecting what link(s) out of the usable ones to activate, calculate a grade for a given link. Calculation of a link grade is done as follows: 1. get the estimated throughput according to the RSSI of the link, this will be the base grade 2. get the channel load from the BSS Load Element, subtracting the load caused by us. Apply the factor on the grade. 3. puncturing factor: calculate the percentage of the punctured subchannels (out of the total subchannels). Apply this on the grade. The link grading will be used by the link selection mechanism in a later patch. Also add KUnit tests for it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.a6799dbd5643.If137ca6dc443606c7d8c99ec1fc38b325003a7c1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: introduce esr_disable_reasonEmmanuel Grumbach
This will maintain a bitmap of reasons for which we want to avoid enabling EMLSR. For now, we have a single reason: BT coexistence, but we will add soon more reasons. Make it a bitmap to make it easier to manage. Since we'll impact the parameters that impact the enablement / disablement of EMLSR from several places, introduce a generic function that takes into account the current state and execute the decision that must be taken. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.94c3590c6f27.I6a190da5025d0523ef483ffac0c64e26675041e6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: move phy band to nl80211 band helperBenjamin Berg
This function is useful in other places, so move it in order to share it. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240415114847.8e456d6c599e.Ibaa76864b30c990bfc35d886ec1344d513a96d14@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-03Merge tag 'wireless-next-2024-04-03' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.10 The first "new features" pull request for v6.10 with changes both in stack and in drivers. The big thing in this pull request is that wireless subsystem is now almost free of sparse warnings. There's only one warning left in ath11k which was introduced in v6.9-rc1 and will be fixed via the wireless tree. Realtek drivers continue to improve, now we have support for RTL8922AE and RTL8723CS devices. ath11k also has long waited support for P2P. This time we have a small conflict in iwlwifi, Stephen has an example merge resolution which should help with fixing the conflict: https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/ Major changes: rtw89 * RTL8922AE Wi-Fi 7 PCI device support rtw88 * RTL8723CS SDIO device support iwlwifi * don't support puncturing in 5 GHz * support monitor mode on passive channels * BZ-W device support * P2P with HE/EHT support ath11k * P2P support for QCA6390, WCN6855 and QCA2066 * tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (122 commits) wifi: mt76: mt7915: workaround dubious x | !y warning wifi: mwl8k: Avoid -Wflex-array-member-not-at-end warnings wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warnings wifi: iwlwifi: mvm: fix check in iwl_mvm_sta_fw_id_mask net: rfkill: gpio: Convert to platform remove callback returning void wifi: mac80211: use kvcalloc() for codel vars wifi: iwlwifi: reconfigure TLC during HW restart wifi: iwlwifi: mvm: don't change BA sessions during restart wifi: iwlwifi: mvm: select STA mask only for active links wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctly wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD cmd v9 wifi: iwlwifi: mvm: Declare HE/EHT capabilities support for P2P interfaces wifi: iwlwifi: mvm: Remove outdated comment wifi: iwlwifi: add support for BZ_W wifi: iwlwifi: Print a specific device name. wifi: iwlwifi: remove wrong CRF_IDs wifi: iwlwifi: remove devices that never came out wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iterator wifi: iwlwifi: mvm: fix active link counting during recovery wifi: iwlwifi: mvm: assign link STA ID lookups during restart ... ==================== Link: https://lore.kernel.org/r/20240403093625.CF515C433C7@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-27Merge tag 'wireless-2024-03-27' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.9-rc2 The first fixes for v6.9. Ping-Ke Shih now maintains a separate tree for Realtek drivers, document that in the MAINTAINERS. Plenty of fixes for both to stack and iwlwifi. Our kunit tests were working only on um architecture but that's fixed now. * tag 'wireless-2024-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (21 commits) MAINTAINERS: wifi: mwifiex: add Francesco as reviewer kunit: fix wireless test dependencies wifi: iwlwifi: mvm: include link ID when releasing frames wifi: iwlwifi: mvm: handle debugfs names more carefully wifi: iwlwifi: mvm: guard against invalid STA ID on removal wifi: iwlwifi: read txq->read_ptr under lock wifi: iwlwifi: fw: don't always use FW dump trig wifi: iwlwifi: mvm: rfi: fix potential response leaks wifi: mac80211: correctly set active links upon TTLM wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW wifi: iwlwifi: mvm: consider having one active link wifi: iwlwifi: mvm: pick the version of SESSION_PROTECTION_NOTIF wifi: mac80211: fix prep_connection error path wifi: cfg80211: fix rdev_dump_mpp() arguments order wifi: iwlwifi: mvm: disable MLO for the time being wifi: cfg80211: add a flag to disable wireless extensions wifi: mac80211: fix ieee80211_bss_*_flags kernel-doc wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes wifi: mac80211: fix mlme_link_id_dbg() MAINTAINERS: wifi: add git tree for Realtek WiFi drivers ... ==================== Link: https://lore.kernel.org/r/20240327191346.1A1EAC433C7@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 02:55:41 +0000