summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
AgeCommit message (Collapse)Author
2024-03-25wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctlyJohannes Berg
Clearly, I put this flag into the wrong place: devices using the code in mac80211.c only do not support EHT, so this isn't even relevant. Fix this by moving the code to the right function. Fixes: 32a5690e9acb ("wifi: iwlwifi: mvm: support wider-bandwidth OFDMA") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240320232419.0d5fb0e971e4.I3b67c5e0ddcbe6e58143ec0bc4e40dd6dba4f863@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iteratorBenjamin Berg
During HW restart only one link will be active initially and other links are only activated again later on. With only a single link EMLSR cannot be enabled and having it marked enabled confuses the internal state. Mark EMLSR as disabled in the cleanup iterator, it can be reenabled later one once this is possible. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240320232419.71eb622d6ce3.Ic4d50695b9bb332190dc712473096083aa96074b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: iwlwifi: mvm: don't support puncturing in 5 GHzJohannes Berg
This is simply not supported, so set the flag for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240319100755.f61448c4a43a.Ib740b341af0ca6c3e06cc9a0b04447a6635df7a8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: iwlwifi: mvm: support iwl_dev_tx_power_cmd_v8Emmanuel Grumbach
This just adds a __le32 that we (currently) don't use. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240319100755.29ff7a88ddac.I39cf2ff1d1ddf0fa62722538698dc7f21aaaf39e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: iwlwifi: mvm: Introduce internal MLO passive scanIlan Peer
Add a new scan type that can be used for internal MLO purposes, i.e., in case updated BSS information is required. Currently only passive scanning is supported. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240319100755.5ce3e756cf8f.I4a41065f6b3a6ec6c6e44e83bc97c277ff7c599e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: iwlwifi: mvm: advertise IEEE80211_HW_HANDLES_QUIET_CSAJohannes Berg
The firmware has handled quiet in CSA for a long time now, but it didn't really matter much. However, now with quiet CSA on a perhaps secondary link, we don't want mac80211 to stop queues, we can continue using a link that's not requiring quiet. Set the feature flag for MLO-capable devices indicating that we'll handle the quiet entirely in the driver/device. However, the firmware doesn't handle quiet in AP mode since we don't really expect to really be needing that (without radar detection), but - even for testing - make that work properly by simply not pulling from TXQs in this scenario. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240311081938.fa75403b5eaa.Ie3ff02215f810fcfefd6a22c481567f94f61c0c6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: iwlwifi: mvm: fix flushing during quiet CSAJohannes Berg
If, for any reason, we're going to attempt to flush the queues while quiet CSA is happening, this cannot succeed. This could be the case if for example mac80211 were to flush after TXing e.g. a deauth frame due to disconnecting during the CSA. In this case, drop the frames instead, the firmware won't let us do any transmissions and may also become unhappy if we're not going to disconnect quickly enough. Currently this doesn't happen as mac80211 stops queues, but we'll want to let mac80211 know not to stop queues for proper multi-link support during CSA, so we need to handle this case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240311081938.d5d629f32ea8.I86d9b849d92273542bfc2d9c671b66179e7ebb72@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: iwlwifi: mvm: Move beacon filtering to be per linkIlan Peer
As the FW statistics are per link context and not per MAC context. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240311081938.47bdecc68e73.Icc0eaebb35d119f8c538c068fbc8f874aac194c3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FWIlan Peer
In the non MLD firmware flows, although the deflink is used, the mapping of link ID to BSS configuration was missing, which causes flows that need this mapping to crash. Fix this by adding the link ID to BSS configuration mapping to non MLD flows as well. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240311081938.0b5c361e8f0c.Ib11f41815d2efa5d1ec57f855de4c8563142987b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: iwlwifi: mvm: disable MLO for the time beingJohannes Berg
MLO ended up not really fully stable yet, we want to make sure it works well with the ecosystem before enabling it. Thus, remove the flag, but set WIPHY_FLAG_DISABLE_WEXT so we don't get wireless extensions back until we enable MLO for this hardware. Cc: stable@vger.kernel.org Reviewed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240314110951.d6ad146df98d.I47127e4fdbdef89e4ccf7483641570ee7871d4e6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: mac80211: pass link conf to abort_channel_switchJohannes Berg
Pass the link conf to the abort_channel_switch driver method so the driver can handle things correctly. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240228095718.27f621106ddd.Iadd3d69b722ffe5934779a32a0e4e596a4e33ed4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: iwlwifi: mvm: support wider-bandwidth OFDMAJohannes Berg
To support wider-bandwidth OFDMA we need to configure the PHY context in the firmware, which will in turn configure the DSP accordingly. Pass the relevant information down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240218194912.ca666ede5dd6.I357972823d20e9045e2c97dbb7ac24fe9f5a6e41@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-15Merge wireless into wireless-nextJohannes Berg
There's a conflict already and some upcoming changes also depend on changes in wireless for being conflict- free, so pull wireless in to make all that easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-12wifi: iwlwifi: nvm: parse the VLP/AFC bit from regulatoryMukesh Sisodiya
6 GHz STA supports different power types as LPI, SP, VLP. and this information is provided by regulatory info. Add support in driver to parse the power type capability in regulatory info from FW and set it to the channel flags. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240208185302.9c6a4acabdb3.I501de5c0d86b9702bf61158a2e91c954a1da9a2a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: iwlwifi: mvm: remove flags for enable/disable beacon filterJohannes Berg
The flags argument to enable/disable beacon filtering functions is unused and always zero, so just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240206175739.2c739c1034a5.I8619949ad4ebd31593d10ece371ebdc6c48db98f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: iwlwifi: mvm: don't abort queue sync in CT-killJohannes Berg
CT kill should stop doing a lot of TX etc. to cool down the NIC, but we don't stop all commands from going to the NIC, and as such we shouldn't abort queue sync, since it can get confused if we do, warning that we do it twice at the same time etc. Only stop it when we'd also not send it in the first place. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240205211151.4e0745e2cd97.I311dc623ce68de6a2da3c21c8d84a387844f714a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: iwlwifi: mvm: define RX queue sync timeout as a macroShaul Triebitz
define the timeout on RX queues notification as a macro so it will be clearer. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240205211151.a6985ea87751.Iafb7ae13aa58d66512e4b3fa6c75149c75cbc305@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: iwlwifi: mvm: expand queue sync warning messagesJohannes Berg
It's a bit tricky to understand what's going on here, add more data to the warning messages to make that clearer. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240205211151.1df82a509636.I2f71811569a5c48eb166c4caa779af2d6160ad33@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: iwlwifi: mvm: Declare support for secure LTF measurementIlan Peer
Declare support for secure LTF measurement if the FW supports it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240204235836.f20d2437c06f.I479df8ab543db2d05c413119ad3eb3936cc86294@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: iwlwifi: mvm: advertise support for protected ranging negotiationAvraham Stern
Advertise support for protected ranging negotiation if the firmware supports it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240206135637.9bb7e13ad18c.I578af1c9836e91069ce318b265bd221f42955992@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: iwlwifi: mvm: remove EHT code from mac80211.cJohannes Berg
The code here is the pre-MLD API, but of course older FW that doesn't support MLD APIs cannot support EHT. Remove some code that shouldn't be there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240204235836.bde5a9d87759.I4c69dd94416f92b0f1f53dd57dafecbec643600d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: iwlwifi: mvm: fix a crash when we run out of stationsEmmanuel Grumbach
A DoS tool that injects loads of authentication frames made our AP crash. The iwl_mvm_is_dup() function couldn't find the per-queue dup_data which was not allocated. The root cause for that is that we ran out of stations in the firmware and we didn't really add the station to the firmware, yet we didn't return an error to mac80211. Mac80211 was thinking that we have the station and because of that, sta_info::uploaded was set to 1. This allowed ieee80211_find_sta_by_ifaddr() to return a valid station object, but that ieee80211_sta didn't have any iwl_mvm_sta object initialized and that caused the crash mentioned earlier when we got Rx on that station. Cc: stable@vger.kernel.org Fixes: 57974a55d995 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240206175739.1f76c44b2486.I6a00955e2842f15f0a089db2f834adb9d10fbe35@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: introduce 'channel request'Johannes Berg
For channel contexts, mac80211 currently uses the cfg80211 chandef struct (control channel, center freq(s), width) to define towards drivers and internally how these behave. In fact, there are _two_ such structs used, where the min_def can reduce bandwidth according to the stations connected. Unfortunately, with EHT this is longer be sufficient, at least not for all hardware. EHT requires that non-AP STAs that are connected to an AP with a lower bandwidth than it (the AP) advertises (e.g. 160 MHz STA connected to 320 MHz AP) still be able to receive downlink OFDMA and respond to trigger frames for uplink OFDMA that specify the position and bandwidth for the non-AP STA relative to the channel the AP is using. Therefore, they need to be aware of this, and at least for some hardware (e.g. Intel) this awareness is in the hardware. As a result, use of the "same" channel may need to be split over two channel contexts where they differ by the AP being used. As a first step, introduce a concept of a channel request ('chanreq') for each interface, to control the context it requests. This step does nothing but reorganise the code, so that later the AP's chandef can be added to the request in order to handle the EHT case described above. Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08Merge wireless into wireless-nextJohannes Berg
There are some changes coming to wireless-next that will otherwise cause conflicts, pull wireless in first to be able to resolve that when applying the individual changes rather than having to do merge resolution later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: mvm: make functions publicShaul Triebitz
In the following patch, iwl_mvm_roc_duration_and_delay and iwl_mvm_roc_add_cmd will be called also from time-event.c. Move then there (where they more belong) and make then public. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240201155157.3edafc4d59aa.Ic68e90758bcad9ae00e0aa602101842dac60e1a1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: mvm: refactor duplicate chanctx conditionJohannes Berg
Refactor the check for using a chanctx's def vs. min_def, to have the same in both places and reuse it later. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240129211905.6fcde4051adf.I343934874612d21727ed167accaa967958b2c25b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: mvm: support SPP A-MSDUsJohannes Berg
If the firmware has the necessary support, enable SPP A-MSDUs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240129211905.15e4570e471f.I87cf284d3b19bb9f5558f0f33afaace6d6492acb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: mvm: fix the TLC command after ADD_STAEmmanuel Grumbach
ADD_STA resets the link quality data inside the firmware. This is not supposed to happen and has been fixed for newer devices. For older devices (AX201 and down), this makes us send frames with rates that are not in the TLC table. Fixes: 5a86dcb4a908 ("wifi: iwlwifi: mvm: update station's MFP flag after association") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240129211905.1deca7eaff14.I597abd7aab36fdab4aa8311a48c98a3d5bd433ba@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: mvm: add support for TID to link mapping neg requestAyala Beker
Add support for handling TID to link mapping negotiation request and decide whether to accept it or not. Accept the request if all TIDs are mapped to the same link set, otherwise reject it. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240129211905.aab9819c378d.Icf6b79a362763e2e8b85959471f303b586617242@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: mvm: initialize rates in FW earlierJohannes Berg
When connecting to an AP, we currently initialize the rate control only after associating. Since we now use firmware to assign rates to auth/assoc frames rather than using the data in the station and the firmware doesn't know, they're transmitted using low mandatory rates. However, if the AP advertised only higher supported rates we want to use them to be nicer (it still must receive mandatory rates though), so send the information to the firmware earlier to have it know about it and be able to use it. Fixes: 499d02790495 ("wifi: iwlwifi: Use FW rate for non-data frames") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240128084842.ed7ab1c859c2.I4b4d4fc3905c8d8470fc0fee4648f25c950c9bb7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26wifi: iwlwifi: mvm: skip adding debugfs symlink for reconfigBenjamin Berg
The function to add an interface may be called without a previous removal if the HW is being reconfigured. As such, only add the symlink if the hardware is not being reconfigured due to a HW_RESTART. Fixes: c36235acb34f ("wifi: iwlwifi: mvm: rework debugfs handling") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240123200528.314395eacda4.I5823e962c3c3674b942383733debd10b3fe903e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26wifi: iwlwifi: add support for a wiphy_work rx handlerMiri Korenblit
The wiphy_work infra ensures that the entire worker will run with the wiphy mutex. It is useful to have RX handlers running as a wiphy_work, when we don't want the handler to run in parallel with mac80211 work (to avoid races). For example - BT notification can disable eSR starting from the next patch. In ieee80211_set_active_links we first check that eSR is allowed, (drv_can_activate_links) and then activate it. If the BT notif was received after drv_can_activate_links (which returned true), and before the activation - eSR will be activated when it shouldn't. If BT notif is handled with the wiphy mutex, it can't run in parallel to ieee80211_set_active_links, which also holds that mutex. Add the necessary infrastructure here, for use in the next commit. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240123200528.ce83d16cdec8.I35ef53fa23f58b9ec17924099238b61deafcecd7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26wifi: iwlwifi: remove retry loops in startJohannes Berg
There's either the pldr_sync case, in which case we didn't want or do the retry loops anyway, or things will just continue to fail. Remove the retry loop that was added in a previous attempt to address the issue that was later (though still a bit broken) addressed by the pldr_sync case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240123200528.f80a88a18799.I48f21eda090f4cc675f40e99eef69a986d21b500@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: replace ENOTSUPP with EOPNOTSUPPAndrei Otcheretianski
ENOTSUPP isn't a standard error code, don't use it. Replace with EOPNOTSUPP instead. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.a69f4347b5f8.I88429d5de8251287ec0b58ff26a588465b9049a5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: disallow puncturing in US/CanadaJohannes Berg
For now, this isn't allowed. The API to mac80211 isn't great for this, but we need to change the API to move puncturing into the chanctx/chandef, and will do it better then. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.38955b68b429.I0c4ae99179b271648a747a51eb04853504c7952c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: Allow DFS concurrent operationAndrei Otcheretianski
AX210 devices allow concurrent P2P operation on DFS channels. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.dc39b33bf507.I04dfda24d73091fb75701279d10ac400314de488@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: implement new firmware API for statisticsAnjaneyulu
The new firmware API uses a new command and notification, the command configures in which statistics types driver is interested and the notification is sent periodically. An additional change in the API is that most of the statistics data is accumulated and reported by the firmware per MLO link. Implement new command and notification handlers and adjust to per-link statistics. Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231022173519.8cc7df0ebff2.If1dcb57145841c5b3c68ed112bbfcd0201f7acc3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: fix regdb initializationGregory Greenman
In order to get regulatory domain, driver sends MCC_UPDATE_CMD to the FW. One of the parameters in the response is the status which can tell if the regdomain has changed or not. When iwl_mvm_init_mcc() is called during iwl_op_mode_mvm_start(), then sband is still NULL and channel parameters (i.e. chan->flags) cannot be initialized. When, further in the flow, iwl_mvm_update_mcc() is called during iwl_mvm_up(), it first checks if the regdomain has changed and then skips the update if it remains the same. But, since channel parameters weren't initialized yet, the update should be forced in this codepath. Fix that by adding a corresponding parameter to iwl_mvm_init_fw_regd(). Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.78b2c5b891b0.Iac49d52e0bfc0317372015607c63ea9276bbb188@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: disable multi rx queue for 9000Emmanuel Grumbach
Multi rx queue allows to spread the load of the Rx streams on different CPUs. 9000 series required complex synchronization mechanisms from the driver side since the hardware / firmware is not able to provide information about duplicate packets and timeouts inside the reordering buffer. Users have complained that for newer devices, all those synchronization mechanisms have caused spurious packet drops. Those packet drops disappeared if we simplify the code, but unfortunately, we can't have RSS enabled on 9000 series without this complex code. Remove support for RSS on 9000 so that we can make the code much simpler for newer devices and fix the bugs for them. The down side of this patch is a that all the Rx path will be routed to a single CPU, but this has never been an issue, the modern CPUs are just fast enough to cope with all the traffic. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.2917eb8b7af9.Iddd7dcf335387ba46fcbbb6067ef4ff9cd3755a7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: remove set_tim callback for MLD opsJohannes Berg
In new firmware, we don't need this any more and it won't be called any more by mac80211, since powersave handling is all done by firmware. Remove it from the MLD ops. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.1a1ded96ffc2.Ie49d3004acdd6299fb84346c76b2b2b2f195196b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: make time_events MLO awareMiri Korenblit
As session protection API is moving to be per link instead of per mac, move the time events to be per link too. Since there is only one concurrent time event per mac, it feels unnecessary to have the time_event as a member of iwl_mvm_link_info. (That way we will have to iterate over all links each time we want to clear a time event, and also we will need mac80211 to tell us the link id when mgd_tx_complete() is called.) So leave this as a member of iwl_mvm_vif, but add the link id to the time_event structure. The link id in time_event will only be maintained and used for: 1. When SESSION_PROTECTION_CMD is supported (before it, we don't have MLO) 2. For time_events of types SESSION_PROTECT_CONF_ASSOC, SESSION_PROTECT_CONF_P2P_DEVICE_DISCOV, and SESSION_PROTECT_CONF_P2P_GO_NEGOTIATION (not for aux roc/ Hot Spot time_events). For P2P, non-MLO connections, and pre-MLD API, deflink id, meaning 0, will be used Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.21496bcacb18.I79d037325b4fae4c12a22d9477e53fc9c537ad46@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: fix iwl_mvm_mac_flush_sta()Johannes Berg
When I implemented iwl_mvm_mac_flush_sta() I completely botched it; it basically always happens after the iwl_mvm_sta_pre_rcu_remove() call, and that already clears mvm->fw_id_to_mac_id[] entries, so we cannot rely on those at iwl_mvm_mac_flush_sta() time. This means it never did anything. Fix this by just going through the station IDs and now with the new API for iwl_mvm_flush_sta(), call those. Fixes: a6cc6ccb1c8a ("wifi: iwlwifi: mvm: support new flush_sta method") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.0b5878e93118.I1093e60163052e7be64d2b01424097cd6a272979@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: change iwl_mvm_flush_sta() APIJohannes Berg
This API is type unsafe and needs an extra parameter to know what kind of station was passed, so it has two, but really it only needs two values. Just pass the values instead of doing this type-unsafe dance, which will also make it better to use for multi-link. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.aeb3bf4204cd.I5b0e6d64a67455784bc8fbdaf9ceaf03699d9ce1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: fix the PHY context resolution for p2p deviceEmmanuel Grumbach
We seem to have an issue in case we had a BSS and a P2P device on channel 1 and then, the P2P device gets an ROC on channel 6. We would change the channel of the PHY context to channel 6 even if the BSS was using that same PHY context. Revamp that code and don't try to change a PHY context, it doesn't mean much for the firmware anyway. Just remove it and allocate a new one. This makes the logic easier to follow. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.4bc8b90d7be0.I1232dca3fe007362ec0ae0cf1d96217f2544e0d2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: fold the ref++ into iwl_mvm_phy_ctxt_addEmmanuel Grumbach
When we want to add a phy_ctxt, we need to increase the ref. Note that all the WARN_ONs are already in place: * We check that we don't add a context with ref != 0 * We check that we don't modify a context with ref = 0 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.c19c07746b26.I5b0cbe0760811631a320218a10b88870b5bf0897@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: don't add dummy phy contextEmmanuel Grumbach
From its very first stages of development, iwlmvm added all the PHY context immediately upon firmware boot. Then, all we needed to do is to modify the contexts. This was fine if the addition of a PHY context that we don't need is free. This was true until now. Newer devices will run calibrations upon the addition of a PHY context. Change the way we work with PHY context in iwlmvm. Fortunately, we already have all the ref counting in place so that it is not very hard to do. Also, since we now remove the PHY context before the link is removed (but after it has been de-activated of course), it'll confuse the firmware if we put the late phy_id into the LINK command that removes the link. Change this to put an invalid phy_id just like we do when we add a link that has no PHY context yet. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.55a1a78719be.I2032a7d227b57f4fc4370a2793476d47538404fd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: cleanup MLO and non-MLO unification codeMiri Korenblit
bss_info_changed() callback of mac80211 was originally in both MLD and non-MLD API. Therefore, we extracted the common part to a function which receives a callback structure with the mode-specific (non-MLO\MLO) ops. Eventually, for MLO API, bss_info_changed() callback was split into 2 callbacks: link_info_changed() and vif_cfg_changed() so it is no longer in use for MLO, only for non-MLO. Remove the code that uses the mode-specific callback structure. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.b65fbcdb9295.I2a64a6f1178ee0466755d728addc77acbb2ed6f4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: implement ROC version 3Shaul Triebitz
Define the new API for ROC command and notification. Use ROC version 3 command and notificaiton for hotspot. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.0cff02aecc16.If0a89ddc6b2339988ff51efa6709d4a883569969@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: Fix unreachable code pathIlan Peer
Fix unreachable code path that was introduced in the P2P Device linking refactoring. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.39d76eeea781.I2dc1fc6152a2cd4cf68827f4d3bf83e2293d3dfb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: Don't always bind/link the P2P Device interfaceIlan Peer
It is not necessary to keep the P2P Device bound/linked to a PHY context when there is no active ROC. Modify the P2P Device flows so the binding/linking would be done only while ROC is active. With this change the switch_phy_ctxt() is no longer needed so remove it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.c5b83b4bf9de.Ia80daf3ba0b5fec7d0919247fcbdbdb58bddf02b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 18:27:14 +0000