summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm/ftm-responder.c
AgeCommit message (Collapse)Author
2023-06-14wifi: iwlwifi: mvm: FTM responder MLO supportAvraham Stern
Add a link configuration parameter to FTM responder start instead of using the default link. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230612184434.b367f9bd19b8.I158c71998f39a6c15463ff5ae30129da8ad46d22@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: make HLTK configuration for PASN station optionalAvraham Stern
When secure LTF is not used, the HLTK is not derived during the PASN authentication. Make the HLTK optional when adding a PASN station. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.a57f7f3b59bd.Ifa88afb51a2516156153ac321d81556e295036c2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: vif preparation for MLOGregory Greenman
In MLO, some fields of iwl_mvm_vif should be defined in the context of a link. Define a separate structure for these fields and add a deflink object to hold it as part of iwl_mvm_vif. Non-MLO legacy code will use only deflink object while MLO related code will use the corresponding link from the link array. It follows the strategy applied in mac80211 for introducing MLO changes. The below spatch takes care of updating all driver code to access fields separated into MLD specific data structure via deflink (need to convert all references to the fields listed in var to deflink.var and also to take care of calls like iwl_mvm_vif_from_mac80211(vif)->field). @iwl_mld_vif@ struct iwl_mvm_vif *v; struct ieee80211_vif *vv; identifier fn; identifier var = {bssid, ap_sta_id, bcast_sta, mcast_sta, beacon_stats, smps_requests, probe_resp_data, he_ru_2mhz_block, cab_queue, phy_ctxt, queue_params}; @@ ( v-> - var + deflink.var | fn(vv)-> - var + deflink.var ) Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230328104948.4896576f0a9f.Ifaf0187c96b9fe52b24bd629331165831a877691@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move some future per-link data to bss_confJohannes Berg
To add MLD, reuse the bss_conf structure later for per-link information, so move some things into it that are per link. Most transformations were done with the following spatch: @@ expression sdata; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -sdata->vif.var +sdata->vif.bss_conf.var @@ struct ieee80211_vif *vif; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -vif->var +vif->bss_conf.var Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-18iwlwifi: make iwl_fw_lookup_cmd_ver() take a cmd_idJohannes Berg
Instead of taking the group/command separately, make the function take a combined command ID. In many cases, this allows us to pass an existing command ID (e.g. cmd.id), or introduce a new variable for it, so that we don't use the command ID twice. This way, we can also use LONG_GROUP implicitly, so we don't need to spell that out for many commands. Apart from mvm.h, fw/img.{c,h} changes and some copyright and indentation updates, this was done with spatch: @@ identifier cmd; expression fw, G, C, def; @@ struct iwl_host_cmd cmd = { .id = WIDE_ID(G, C), ... }; ... -iwl_fw_lookup_cmd_ver(fw, G, C, def) +iwl_fw_lookup_cmd_ver(fw, cmd.id, def) @@ identifier cmd; expression fw, C, def; @@ struct iwl_host_cmd cmd = { .id = C, ... }; ... -iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def) +iwl_fw_lookup_cmd_ver(fw, cmd.id, def) @@ identifier func; expression fw, G, C, mvm, flags, cmd, size, def; type rettype; @@ rettype func(...) { +u32 cmd_id = WIDE_ID(G, C); ... -iwl_fw_lookup_cmd_ver(fw, G, C, def) +iwl_fw_lookup_cmd_ver(fw, cmd_id, def) ... -iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(G, C), flags, cmd, size) +iwl_mvm_send_cmd_pdu(mvm, cmd_id, flags, cmd, size) ... } @@ identifier func; expression fw, G, C, mvm, flags, cmd, size, def; type rettype; @@ rettype func(...) { +u32 cmd_id = C; ... -iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def) +iwl_fw_lookup_cmd_ver(fw, cmd_id, def) ... -iwl_mvm_send_cmd_pdu(mvm, C, flags, cmd, size) +iwl_mvm_send_cmd_pdu(mvm, cmd_id, flags, cmd, size) ... } @@ expression fw, C, def; @@ -iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def) +iwl_fw_lookup_cmd_ver(fw, C, def) @@ expression fw, C, G, def; @@ -iwl_fw_lookup_cmd_ver(fw, G, C, def) +iwl_fw_lookup_cmd_ver(fw, WIDE_ID(G, C), def) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220128153014.c4ac213cef5c.I6fd9a4fcbcf16ef3a3ae20a2b08ee54ebe06f96f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-02-18iwlwifi: prefer WIDE_ID() over iwl_cmd_id()Johannes Berg
The order of arguments for iwl_cmd_id() is confusing, and the version is always 0 and thus a useless argument. Prefer the WIDE_ID() macro (which needs to be a macro due to use in switch cases etc.) over the iwl_cmd_id() function. Obviously done with spatch: @@ expression G, C; @@ -iwl_cmd_id(C, G, 0) +WIDE_ID(G, C) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220128153014.cc4f9d1a2e9b.Ieb023cd773ea22e819d1ef1c37ae857ecc1a839d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: add support for 160Mhz in ranging measurementsAvraham Stern
Add support for 160Mhz bandwidth in ranging measurements for initiator and responder. Advertise 160Mhz in the supported bandwidths for ranging. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017113927.32a13ac0f4d4.I883492648518cc5067a2f91b7ecf8bfa55f6876a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-08-26iwlwifi: mvm: add support for responder config command version 9Avraham Stern
This version adds the following configuration options: 1. Enable/disable setting the session id in the FTM frame 2. Set the BSS color for the responder 3. Set the minimum and maximum time between measurements for non trigger based NDP ranging. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.0a10d43f3d7f.Ice4112c1910cf94babd1c2d492a3a3de9f7ee6cb@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: responder: support responder config command version 8Avraham Stern
Version 8 add NDP ranging parameters configuration, as well as enable/disable NDP ranging and LMR feedback. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.ce9570d755d3.Ic81cb8da9aecbbc9edff468cb4ffbb741418cc73@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: use SPDX tagsJohannes Berg
Use SPDX tags instead of the long copyright notices. Also cleanup some duplicate copyright notices and combine the years where possible. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-08iwlwifi: mvm: avoid possible NULL pointer dereferenceAvraham Stern
When adding a PASN station, the station is added to the list only if a TK is configured. Otherwise the station pointer should not be used. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.b8a493c168a7.Ie9a0f9dfd9e9c58c603dd06e45151119467a7804@changeid
2020-10-01iwlwifi: mvm: responder: allow to set only the HLTK for an associated stationAvraham Stern
For secure ranging with an associated station, the driver only needs to set the HLTK. There is no need to add an internal station for PMF since the FW will use the existing station which already has the TK installed. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200930161256.fcebaa5c9bc8.Ic584cc47fee717d0bdb43965798dbdf45d89910a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-01iwlwifi: mvm: location: set the HLTK when PASN station is addedAvraham Stern
When a PASN station is added, set the HLTK to FW. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200930161256.1c7a59fd3164.I68005f0015ad04e53d0239e2d2ee85d5ffdeaa37@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-01iwlwifi: mvm: add support for responder dynamic config command version 3Avraham Stern
Version 3 of the dynamic config command adds support for configuring the HLTK for secure ranging with a station. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200928121852.f54be85420dd.I39b498fbbbc2f6eed6ce1f77b0f59f7a72fab343@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-01iwlwifi: fw: add default value for iwl_fw_lookup_cmd_verMordechay Goodstein
For new APIs this avoids checking every return if it's IWL_FW_CMD_VER_UNKNOWN (99) or it's lower than the new API value Done with spatch: -iwl_fw_lookup_cmd_ver(E1, E2, E3) +iwl_fw_lookup_cmd_ver(E1, E2, E3, IWL_FW_CMD_VER_UNKNOWN) Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200928121852.70bec6eb8008.I6ea78553801d33f7ed10fcd2e4be4ba781fe469a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-01iwlwifi: mvm: add an option to add PASN stationAvraham Stern
A FTM responder may do PASN authentication with unassociated stations to allow secure ranging. In this case, the driver will add an internal station and install the TK so the FW will accept protected FTM request frames from this station and will send a protected FTM response frame. In addition, the driver needs to configure the HLTK to the FW so the FW can derive the secure LTF bits. This is left for a later patch since it is not yet supported by the FW. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200911204056.c915b44ad7dd.I72ef7f9753964555561c27ec503241105eddb14e@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-04-24iwlwifi: move API version lookup to common codeMordechay Goodstein
The API version lookup is parsed from a TLV and should be in shared code make make it reusable across all opmodes. Also change the function names from mvm to fw, since this is not mvm-specific anymore. Additionally, since this function is not just a single line of code, it shouldn't be inline. Convert them to actual functions. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200421133326.cf94672dfcdb.I5ede9cc25ee8de7b8d2b5c574f917a18971da734@changeid
2019-12-23iwlwifi: mvm: add support for responder config command version 7Avraham Stern
The new API requires the driver to config the supported frame format (legacy, HT, VHT etc.). Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: mvm: support FTM responderJohannes Berg
Add support for FTM responder for hardware/firmware combinations that advertise support for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 22:53:08 +0000