summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/fw
AgeCommit message (Collapse)Author
2019-06-29iwlwifi: don't WARN when calling iwl_get_shared_mem_conf with RF-KillEmmanuel Grumbach
iwl_mvm_send_cmd returns 0 when the command won't be sent because RF-Kill is asserted. Do the same when we call iwl_get_shared_mem_conf since it is not sent through iwl_mvm_send_cmd but directly calls the transport layer. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg: debug recording stop and restart command removeShahar S Matityahu
The 0xF6 command used to start and stop the recording from 22560 devices was removed. This is causing an assert when the driver tries to alter the recording state. Remove the use of the command. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg_ini: fix debug monitor stop and restart in ini modeShahar S Matityahu
In ini debug mode the recording does not restart unless legacy monitor configuration is also given. Add dbg_ini_dest field to trans to indicate the debug monitor destination to solve this. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg: move trans debug fields to a separate structShahar S Matityahu
Unite iwl_trans debug related fields under iwl_trans_debug struct to increase readability and keep iwl_trans clean. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg_ini: remove redundant checking of ini modeShahar S Matityahu
There are several flows where the driver checks if it runs in ini mode. Some of these flows are no longer used in ini mode or there is another condition that check the ini mode in the same flow. Either way, those conditions are redundant. Remove the redundant conditions. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg_ini: enforce apply point early on buffer allocation tlvShahar S Matityahu
Apply buffer allocation TLV only if it is set to apply point IWL_FW_INI_APPLY_EARLY. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg: fix debug monitor stop and restart delaysShahar S Matityahu
The driver should delay only in recording stop flow between writing to DBGC_IN_SAMPLE register and DBGC_OUT_CTRL register. Any other delay is not needed. Change the following: 1. Remove any unnecessary delays in the flow 2. Increase the delay in the stop recording flow since 100 micro is not enough 3. Use usleep_range instead of delay since the driver is allowed to sleep in this flow. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Fixes: 5cfe79c8d92a ("iwlwifi: fw: stop and start debugging using host command") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: Add support for SAR South Korea limitationHaim Dreyfuss
South Korea is adding a more strict SAR limit called "Limb SAR". Currently, WGDS SAR offset group 3 is not used (not mapped to any country). In order to be able to comply with South Korea new restriction: - OEM will use WGDS SAR offset group 3 to South Korea limitation. - OEM will change WGDS revision to 1 (currently latest revision is 0) to notify that Korea Limb SAR applied. - Driver will read the WGDS table and pass the values to FW (as usual) - Driver will pass to FW an indication that Korea Limb SAR is applied in case table revision is 1. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: fw api: support adwell HB default APs number apiShahar S Matityahu
Support adaptive dwell high band default number of APs new api. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg_ini: implement dump info collectionShahar S Matityahu
The info struct contains data about the FW, HW, RF and the debug configuration. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg_ini: support debug info TLVShahar S Matityahu
Add support to debug info TLV. The TLV contains human readable naming of the FW image and the debug configuration. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg_ini: use different barker for ini dumpShahar S Matityahu
Use a different barker for ini dump to allow differentiation from legacy dump. Also it allows to remove INI_BIT from dump TLVs. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg_ini: add consecutive trigger firing supportShahar S Matityahu
When a dump trigger is fired, the driver sets IWL_FWRT_STATUS_DUMPING and aborts any consecutive dump collection. To allow consecutive triggers firing, use 5 dump workers and allocate them upon incoming dump collection requests. This functionality is needed since in ini debug mode each trigger may have entirely different memory regions to collect unlike the legacy mode in which all the triggers dump the same memory regions. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg_ini: abort region collection in case the size is 0Shahar S Matityahu
Allows to abort region collection in case the region size is 0. It is needed for future regions that their size might be 0. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: update CSI APIJohannes Berg
Update the CSI API to the new version supported by the firmware. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg_ini: dump headers cleanupShahar S Matityahu
Unite dump memory ranges under a single struct and add a specific header for each type of memory. Also, maintain a single version to all dump structures. This cleanup is also needed for the future addition of FW notification regions and others. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-29iwlwifi: dbg: allow dump collection in case of an early errorShahar S Matityahu
Improve the robustness of the dump collection flow in case of an early error: 1. in iwl_trans_pcie_sync_nmi, disable and enable interrupts only if they were already enabled 2. attempt to initiate dump collection in iwl_fw_dbg_error_collect only if the device is enabled 3. check Tx command queue was already allocated before trying to collect it Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-06-01iwlwifi: print fseq info upon fw assertShahar S Matityahu
Read fseq info from FW registers and print it upon fw assert. The print is needed since the fseq version coming from the TLV might not be the actual version that is used. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-05Merge tag 'wireless-drivers-next-for-davem-2019-05-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.2 Most likely the last patchset of new feature for 5.2, and this time we have quite a lot of new features. Most obvious being rtw88 from Realtek which supports RTL8822BE and RTL8822CE 802.11ac devices. We have also new hardware support for existing drivers and improvements. There's one conflict in iwlwifi, my example conflict resolution below. Major changes: iwlwifi * bump the 20000-series FW API version * work on new hardware continues * RTT confidence indication support for Fine Timing Measurement (FTM) * an improvement in HE (802.11ax) rate-scaling * add command version parsing from the fimware TLVs * add support for a new WoWLAN patterns firmware API rsi * add support for rs9116 mwifiex * add support for SD8987 brcmfmac * add quirk for ACEPC T8 and T11 mini PCs rt2x00 * add RT3883 support qtnfmac * fix debugfs interface to support multiple cards rtw88 * new driver mt76 * share more code across drivers * add support for MT7615 chipset * rework DMA API * tx/rx performance optimizations * use NAPI for tx cleanup on mt76x02 * AP mode support for USB devices * USB stability fixes * tx power handling fixes for 76x2 * endian fixes Conflicts: There's a trivial conflict in drivers/net/wireless/intel/iwlwifi/fw/file.h, just leave IWL_UCODE_TLV_FW_FSEQ_VERSION to the file. 'git diff' output should be just empty: diff --cc drivers/net/wireless/intel/iwlwifi/fw/file.h index cd622af90077,b0671e16e1ce..000000000000 --- a/drivers/net/wireless/intel/iwlwifi/fw/file.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/file.h ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three trivial overlapping conflicts. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29iwlwifi: dbg_ini: check for valid region type during regions parsingShahar S Matityahu
Add region type checking during regions parsing to avoid attempts to parse unsupported or illegal region types. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-29iwlwifi: avoid allocating memory for region with disabled domainShahar S Matityahu
In iwl_fw_ini_get_trigger_len the driver allocates space for memory regions regardless of their domain and in iwl_fw_ini_dump_trigger the driver aborts trigger collection of disabled domain. This diff causes unneeded memory allocation and traling zeros in the dump file. Solve this behavior by enforcing domain checking in iwl_fw_ini_get_trigger_len Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-29iwlwifi: dbg: replace dump info device family with HW typeShahar S Matityahu
In the dump info, the driver sets device_family to IWL_FW_ERROR_DUMP_FAMILY_7 in case IWL_FW_ERROR_DUMP_FAMILY_7 is used or IWL_FW_ERROR_DUMP_FAMILY_8 otherwise. This information is misleading and incorrect since the driver sets the device family to 8 to any device that is from family 8 and later, e.g. device family 9 is represented as 8 in the dump. Also, the device family enum is known only to the driver and does not give any information to the FW developer Change the device family to HW type to give propper data about the nic in use. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-29iwlwifi: dbg_ini: add periodic trigger supportShahar S Matityahu
Allows to configure a periodic data collection Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-29iwlwifi: dbg_ini: add lmac and umac error tables dumping supportShahar S Matityahu
Add LMAC_ERROR_TABLE and UMAC_ERROR_TABLE region types and handle them in the same way as we handle DEVICE_MEMORY. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-29iwlwifi: parse command version TLVJohannes Berg
In newer firmware images there's a command version TLV that states, for each listed command or notification, which version of the command and/or notification structure is used. Read and keep this data to be able to use it in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-29iwlwifi: support fseq tlv and print fseq versionShahar S Matityahu
Support fseq tlv and print fseq version to dmesg. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-29iwlwifi: mvm: support v2 of the WoWLAN patterns commandLuca Coelho
Add new definitions for the WoWLAN patterns API version 2 and support for version 2 of the WoWLAN patterns command without implementing the new features. With this commit we only supporting the existing bitmask pattern match. Use the new version only if the TLV is set. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-19iwlwifi: dbg_ini: set dump bit only when trigger collection is certainShahar S Matityahu
In case the the trigger occurrences is zero or force_restart is set, the driver sets IWL_FWRT_STATUS_DUMPING without actually scheduling trigger collection. At this point no other dump collection can be performed. Solve this by setting IWL_FWRT_STATUS_DUMPING bit only when the driver is surely going to schedule dump collection Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-19iwlwifi: mvm: support rtt confidence indicationAvraham Stern
The range response notification API has changed to add a value that indicates the confidence of the rtt result. Support the new API and print the rtt confidence for debug. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-19iwlwifi: dbg: add lmac and umac PC registers to periphery dumpShahar S Matityahu
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-19iwlwifi: dbg: add periphery memory dumping support to ax210 device familyShahar S Matityahu
Allows to dump periphery memory on ax210 devices. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-19iwlwifi: dbg_ini: add debug prints to the ini flowsShahar S Matityahu
Add debug prints to the ini flow and rewrite existing prints to provide more information Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-19iwlwifi: dbg_ini: support notification and dhc regions type parsingShahar S Matityahu
IWL_FW_INI_REGION_CSR and IWL_FW_INI_REGION_NOTIFICATION does not have memory addresses attached to them so the driver should skip them when parsing the region tlv. Also, instead of declearing what region types should skip the addition of the memory addresses, declare what regions have addition of memory addresses. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-19iwlwifi: unite macros with same meaningShaul Triebitz
TFD_*_SLOTS and IWL_*_QUEUE_SIZE both define the TX queue size (number of TFDs). Get rid of TFD_*_SLOTS and use only IWL_*_QUEUE_SIZE. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-18Merge tag 'wireless-drivers-next-for-davem-2019-04-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.2 Nothing really special standing out this time, iwlwifi being the most active driver. Major changes: iwlwifi * send NO_DATA events so they can be captured in radiotap * support for multiple BSSID * support for some new FW API versions * support new hardware * debugfs cleanups by Greg-KH qtnfmac * allow each MAC to specify its own regulatory rules ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18iwlwifi: dbg_ini: check debug TLV type explicitlyShahar S Matityahu
In ini debug TLVs bit 24 is set. The driver relies on it in the memory allocation for the debug configuration. This implementation is problematic in case of a new debug TLV that is not supported yet is added and uses bit 24. In such a scenario the driver allocate space without using it which causes errors in the apply point enabling flow. Solve it by explicitly checking if a given TLV is part of the list of the supported ini debug TLVs. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Fixes: f14cda6f3b31 ("iwlwifi: trans: parse and store debug ini TLVs") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: mvm: support HE context cmd API changeSara Sharon
Support API change to pass all mbssid parameters to the firmware. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg: fill radio registers data regardless of fifos data dumpingShahar S Matityahu
The driver calculates memory regions dump size, allocate memory and fills the data. The driver fills the radio registers data only if the memory size of the fifos is greater then zero, so in case the user masked out the fifos from the dump, the driver will skip filling the radio register data. Solve this by checking filling radio registers data independently from fifos data. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: apply rx fifo offset after reading the region registersShahar S Matityahu
The region registers comes in abolute value so read the registers before applying the rx fifo offset. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: remove redundant type argument from iwl_dump_ini_memShahar S Matityahu
Since iwl_dump_ini_mem receive struct iwl_fw_ini_region_cfg which holds the region type, there is no point to pass the type separately. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: remove redundant curly brackets from trigger collection flowShahar S Matityahu
remove redundant curly brackets from iwl_fw_ini_dump_trigger and iwl_fw_ini_get_trigger_len Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: add monitor header to smem monitorShahar S Matityahu
Add write pointer and cycle count registers to smem monitor header. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: fix the dram monitor header sizeShahar S Matityahu
Add sizeof(struct iwl_fw_ini_error_dump_range) to the header of the dram monitor. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: change memory range base address to u64Shahar S Matityahu
AX210 devices will use u64 for the base address to the DRAM monitor buffer. To support this, change the structure for all device families so both address sizes fit. Also move range_data_size to the top of the struct to ease the parsing of the memory range. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: add registers addresses in fifo dumpShahar S Matityahu
Add to the fifo dump the registers addresses. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: add region id to the region dumpShahar S Matityahu
Add the region id of the collected memory to the header of the memory region. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: add version to dump headerShahar S Matityahu
Add version to dump header to allow future changes of the dump struct, once the ini debug flow becomes operational, without breaking backwards compatibility. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: add memory offset to the base address of a memory regionShahar S Matityahu
Add the offset to the base address of a memory region to show the actual addresses being read. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: fix iwl_dump_ini_dev_mem_iter memory base addressShahar S Matityahu
The driver is using range->start_addr before assigning it a value. Set value into range->start_addr and then use it. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 18:47:43 +0000