summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/cfg
AgeCommit message (Collapse)Author
2020-10-08iwlwifi: bump FW API to 59 for AX devicesLuca Coelho
Start supporting API version 59 for AX devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.0359498107fe.I559b5140be6abbee5eb759ec6e5ca046f7178f8f@changeid
2020-10-08iwlwifi: pcie: fix the xtal latency value for a few qu devicesLuca Coelho
We were using 5 s for some qu devices, but their xtal stabilizes much faster than that. Reduce the value to 500 ms. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.d0e2253c282f.Icd2ff00adff52f6c96fb261c34fbf129ce67a00d@changeid
2020-10-08iwlwifi: pcie: fix xtal latency for 9560 devicesLuca Coelho
We were using a very high latency for all 9560 devices so they all would have time to stabilize. But this causes the system to be slighly slower, so we can use the best values for each device. This requires a new trans cfg struct for devices with longer latency and some adjustments to the other structs. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.34392f98fdb1.I3d3db14f6d1a8ecc547ca6afce8488816bd26081@changeid
2020-10-01iwlwifi: bump FW API to 57 for AX devicesLuca Coelho
Start supporting API version 57 for AX devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200930191738.f8660d41f62b.Iac1d5b3186e22956cfd000fd9dc5886a79617b78@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-01iwlwifi: add new cards for MA familyIhab Zhaika
add few PCI ID'S for ma with gf and mr in AX family. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200924162105.6add94c21abe.I1aa1c5e3c2c12ce82ed30429e0ad92225ece7ce3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-01iwlwifi: add new cards for AX201 familyIhab Zhaika
add few PCI ID'S for AX201 family including killer cards. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200911204056.21397978115f.Id2d95275a36a6bb6b226d12cb6c5a629334587db@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-05-29iwlwifi: bump FW API to 56 for AX devicesLuca Coelho
Start supporting API version 56 for AX devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200529092401.aabbc5b472ee.I88cb2c3d2d07e62eac3671335ff1fb80b73c5839@changeid
2020-05-08iwlwifi: use longer queues for 256-BAJohannes Berg
When we have 256 block-ack support, we may need to be very fast to provide a lot of frames to the hardware to transmit, but that cannot be guaranteed. Use a longer queue size to have more time, and the next possible queue size is 1024 since it must be a power of two. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200425130140.851866c7e4c4.I13fa678929431f1694fd202c1da40aa476ab70fe@changeid
2020-05-08iwlwifi: pcie: convert all AX101 devices to the device tablesLuca Coelho
Convert all Qu/Hr1 devices to the new device tables, by modifying the corresponding structures, adding a new name and generalizing the device recognition. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200424194456.ec0e04102d2c.Ia36f2c7bbf06cb6436424d40d6adb2376f2962ee@changeid
2020-05-08iwlwifi: pcie: remove occurrences of 22000 in the FW name definesLuca Coelho
We don't use the number 22000 for our devices anymore, so remove all occurrences of it in the FW name macros. While at it, add IWL_QU_B_HR_B to the list of firmwares used by the driver, which was missing. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200424194456.93cc41bdbb4d.Ib7599901888a2d050f851bd878a875f593f2e8e5@changeid
2020-05-08iwlwifi: pcie: convert QnJ with Hr to the device tableLuca Coelho
Convert all the occurrences of QnJ with Hr into a single entry in the PCI device table. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200424194456.21283ca79d82.I57a493c679a56fff11417afdaec76617711ff6a9@changeid
2020-05-08iwlwifi: bump FW API to 55 for AX devicesLuca Coelho
Start supporting API version 55 for AX devices. We skipped 54 because it won't be published. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200424182644.5b4628e18203.I626d3b19d84214a83cd92dc4ddf291903b0983aa@changeid
2020-04-24iwlwifi: pcie: add new structs for So devices with long latencyLuca Coelho
Some So devices have a longer wake latency. To support this properly, add new cfg structs for them so the driver will inform the FW about the need to use another xtal and use a higher wait value during state transitions. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.daf515618f57.I80e60006b108e1586e3c56669635c670597fe08d@changeid
2020-04-24iwlwifi: pcie: add new structure for Qu devices with medium latencyLuca Coelho
Some Qu devices require an intermediate amount of time to wake up and for LTR notifications, so add a new structure with the correct values for them and change the corresponding devices to use it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.d6df2bcee78f.Ie008b0c8f03340a466c1ef981bfd25359c9de90d@changeid
2020-04-24iwlwifi: mvm: tell firmware about required LTR delayJohannes Berg
Some (integrated) devices need a longer LTR delay than the firmware would typically apply, tell it about that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.24276ae2ad61.I8831a538f75893d5cee47b4a81f4b9b7fd0e8bea@changeid
2020-04-24iwlwifi: update few product names in AX familyIhab Zhaika
update the product names of few structs in AX family. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.738dabad8732.I5673eaf8a016b8aa27ab8bab02121108fa723783@changeid
2020-04-24iwlwifi: add new cards for AX familyIhab Zhaika
add few PCI ID'S for AX family. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.5eae2261b70c.I0369619a562c4e4008e2f0a3afb9ed5d4c9b49d4@changeid
2020-03-27Merge tag 'wireless-drivers-next-2020-03-27' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.7 Third set of patches for v5.7. Nothing really special this time, business as usual. When pulling this to net-next there's again a conflict in: drivers/net/wireless/intel/iwlwifi/pcie/drv.c To solve this drop these three lines from the conflict (the first hunk from "HEAD") as the whole AX200 block was moved above in the same file: IWL_DEV_INFO(0x2723, 0x1653, iwl_ax200_cfg_cc, iwl_ax200_killer_1650w_name), IWL_DEV_INFO(0x2723, 0x1654, iwl_ax200_cfg_cc, iwl_ax200_killer_1650x_name), IWL_DEV_INFO(0x2723, IWL_CFG_ANY, iwl_ax200_cfg_cc, iwl_ax200_name), And keep all the __IWL_DEV_INFO() entries (the second hunk). In other words, take everything from wireless-drivers-next. When running 'git diff' after the resolution the output should be empty. Major changes: brcmfmac * add USB autosuspend support ath11k * handle RX fragments * enable PN offload * add support for HE BSS color iwlwifi * support new FW API version * support for EDCA measurements * new scan API features * enable new firmware debugging code ==================== Kalle gave me directions on how to resolve the iwlwifi conflict as follows: ==================== When pulling this to net-next there's again a conflict in: drivers/net/wireless/intel/iwlwifi/pcie/drv.c To solve this drop these three lines from the conflict (the first hunk from "HEAD") as the whole AX200 block was moved above in the same file: IWL_DEV_INFO(0x2723, 0x1653, iwl_ax200_cfg_cc, iwl_ax200_killer_1650w_name), IWL_DEV_INFO(0x2723, 0x1654, iwl_ax200_cfg_cc, iwl_ax200_killer_1650x_name), IWL_DEV_INFO(0x2723, IWL_CFG_ANY, iwl_ax200_cfg_cc, iwl_ax200_name), And keep all the __IWL_DEV_INFO() entries (the second hunk). In other words, take everything from wireless-drivers-next. When running 'git diff' after the resolution the output should be empty. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27iwlwifi: bump FW API to 53 for 22000 seriesLuca Coelho
Start supporting API version 53 for 22000 series. Change-Id: I5725e46394f3f53c3069723fd513cc53c7df383d Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: remove support for QnJ HR FPGALuca Coelho
We don't support the FPGA versions of this card combination anymore. Remove the cfg mangling that tries to load it and all the relevant structures. Change-Id: I190652101afcab682cfba873d062992f11efca32 Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: remove support for QnJ Hr STEP ALuca Coelho
We don't support QnJ HR STEP A anymore. Remove the structures we used for it. Change-Id: I0dfd88232bdc8ff2dd9c4368b8ed9a0c40c86bc8 Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: add trans_cfg for devices with long latencyLuca Coelho
A couple of SoCs, which can be recognized by PCI device IDs 0xA0F0 and 0x43F0, need a longer wait for the xtal to stabilize. To handle this, add a new trans_cfg structure for Qu devices with a larger xtal_latency value and apply them to the devices recognized by these IDs. Also add a flag that allows us to inform the FW that the low latency xtal should be used. Change-Id: I8a14c6af45ea14d8e7f1ef38a589158f38d0c0ea Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: remove unnecessary cfg mangling for Qu C and QuZ with JfLuca Coelho
Now that we identify the correct cfgs with the new tables for Qu step C and QuZ with Jf, we can remove the mangling we do later on. Change-Id: Ic01ce67db147e897ad2424f0e05a70a00d2c620e Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: convert QnJ with Jf devices to new config tableLuca Coelho
All the QnJ devices have a similar matching to the other Qu devices, but needs a different configuration. Convert the QnJ devices to the new table accordingly. Change-Id: If236ef3d0da3e605a3379922818f5897e0affd7e Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: convert all Qu with Jf devices to the new config tableLuca Coelho
Add new generic iwl_trans structures for these devices and apply the correct cfg depending on the device characteristics. Since we have to match Qu with IWL_CONFIG_ANY, we also need to move the Hr devices to the new table, but for now we keep matching on PCI device and subsystem device IDs. Change-Id: I14e9146a99621ff11ce50bc746a4b88af508fee0 Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: move integrated, extra_phy and soc_latency to trans_cfgLuca Coelho
These values are selected based on the PCI device ID, so the decision to use them can be made early. By moving them to the trans_cfg, we avoid duplicating the large cfg structs for small pieces of data (sometimes a single boolean). This will also allow us to make more decisions based on, for instance, the SoC type in used. The trans_cfg concept changes a bit, because previously it was used only to boot the device before reading further characteristics and now it also contains more data that is associated with the device ID. Change-Id: Ib71b07ea9e322eb74571dc5e8aa58f17eece5c9c Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: remove redundant iwl9560_2ac_cfg structLuca Coelho
The iwl9560_2ac_cfg struct is used for PNJ devices and the configuration is the same as iwl9260_2ac_cfg, so we can remove the former to avoid redundancy. Change-Id: I17ac1802f00bd80006930b922a9fc21df60e3c16 Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17iwlwifi: move AX200 devices to the new tableLuca Coelho
Move the AX200 devices to the new table and add the appropriate cfg struct and strings. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.fdfa5f31b8b1.Idfd28829d9f3820de06d3bba8fa66048b8d0d0b0@changeid
2020-03-17iwlwifi: remove trans entries from COMMON 9260 macroLuca Coelho
These entries are decided at runtime using the new parameters now, so they are not needed in the macro that is reused in the configs. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.3387a6c8fdbe.I98284457f26c5695754964b28f0257a7dc7c6b1c@changeid
2020-03-17iwlwifi: move shared clock entries to new tableLuca Coelho
These devices can now also be fully differentiated by using the new parameters. Move them all to the new table format. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.11c65d195677.I8faf50b325282df4892520a3b21fbdedabbb64f0@changeid
2020-03-17iwlwifi: move pu devices to new tableLuca Coelho
All the pu devices can now be differentiated using the new parameters, so move them all to the new tables accordingly. This also includes removal of a few deprecated IDs and redundant cfg structs. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.e7dc61e665f3.I44dcf9195bb8cc9e8c8e3e87182e9185c819a99d@changeid
2020-03-17iwlwifi: remove 9260 devices with 0x1010 and 0x1210 subsytem IDsLuca Coelho
These devices don't exist anymore, so remove them from the tables. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.fef62aa45887.I302e32b7cfff7da0d920547fae60ad9f2296e052@changeid
2020-03-17iwlwifi: convert the 9260-1x1 device to use the new parametersLuca Coelho
The 9260-1x1 device can be differentiated using the PCI device ID. There is a single occurrence of this device, so continue relying on the device and subsystem device IDs. The name of this device was incorrect, so add a new string specifically for it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.4d74e1be7cac.Id27bd9c878b73cb771691cbe6082fd40e079b44d@changeid
2020-03-17iwlwifi: move TH1 devices to the new tableLuca Coelho
TH1 devices can now be fully differentiated by using the device parameters we have (particularly the RF_TYPE). Start using these parameters instead of hardcoding to specific subsystem device IDs. This also fixes the name of one of the TH1 devices that was erroneously using the 9260 struct and renames 9160 to 9162. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.18d4304b5454.Ib168d186da88393e9ec46f0fca523edb48d9138e@changeid
2020-03-17iwlwifi: map 9461 and 9462 using RF type and RF IDLuca Coelho
These devices can be differentiated depending on the RF type and RF ID. Change them to use these instead of relying on the subsystem device IDs. This also fixes some names that were not including 160MHz (as they should). Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.345de1efb3ec.Ib9221027a955188ea7c1ffca8a45bccd6c1e6a13@changeid
2020-03-17iwlwifi: add GNSS differentiation to the device tablesLuca Coelho
Devices that also include a GNSS module have different names, so add a new device option to differentiate them, according to the values we have in the modules section of the subsystem device ID. Additionally, convert the two applicable devices to use this value instead of hardcoded subsystem IDs. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.1f958e558d05.I45492bb57cbbeb4cc0ec84313bade4def7377a27@changeid
2020-03-17iwlwifi: combine 9260 cfgs that only change namesLuca Coelho
All the 0x2526 devices are now in the new table, so we can start reusing configurations and adding the strings independently to all of them, reusing them when possible. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.88e3d47c42a8.I1bd37ae0d0f9f79732f03badf84d7d063993b73e@changeid
2020-03-17iwlwifi: move the remaining 0x2526 configs to the new tableLuca Coelho
Now that we have the strings separate from the rest, we can move the remaining 0x2526 devices to the new table in preparation to reuse the configs. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.a7998f8d7507.I4be8776edb8c30416efc184c66f11add5eed06de@changeid
2020-03-06iwlwifi: cfg: use antenna diversity with all AX101 devicesLuca Coelho
We were erroneously only setting the tx_with_siso_diversity flag in the Qu B-step configurations for AX101 devices, though we should do it on all configurations. Add the flag to the other two configurations, namely Qu C-step and QuZ. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200306151129.1cd986ef467c.Idc0b111475ae3d38b68ae062613c080b574e33e1@changeid
2020-01-04iwlwifi: add device name to device_infoLuca Coelho
We have a lot of mostly duplicated data structures that are repeated only because the device name string is different. To avoid this, move the string from the cfg to the trans structure and add it independently from the rest of the configuration to the PCI mapping tables. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-01-04iwlwifi: implement a new device configuration tableLuca Coelho
Add a new device table that contains information that can be checked at runtime in order to decide which configuration to use. This allows us to map the full cfg independently from the tran-specific configuration. This is the first step in creating the new table. Subsequent patches will add the possibility of checking different values at runtime in order to make the decision. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-01-04iwlwifi: add new iwlax411 struct for type SoSnjOren Givon
Add new struct for SoSnj and add uhb support for ax411 structs. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-12-23iwlwifi: remove CSR registers abstractionLuca Coelho
We needed this abstraction for some CSR registers for IWL_DEVICE_22560, but that has been removed, so we don't need the abstraction anymore. Remove it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-12-23iwlwifi: remove some outdated iwl22000 configurationsLuca Coelho
A few configuration structures were either not referenced anymore or assigned to devices IDs that were not in use anymore. Remove them. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-12-23iwlwifi: allocate more receive buffers for HE devicesJohannes Berg
For HE-capable devices, we need to allocate more receive buffers as there could be 256 frames aggregated into a single A-MPDU, and then they might contain A-MSDUs as well. Until 22000 family, the devices are able to put multiple frames into a single RB and the default RB size is 4k, but starting from AX210 family this is no longer true. On the other hand, those newer devices only use 2k receive buffers (by default). Modify the code and configuration to allocate an appropriate number of RBs depending on the device capabilities: * 4096 for AX210 HE devices, which use 2k buffers by default, * 2048 for 22000 family devices which use 4k buffers by default, * 512 for existing 9000 family devices, which doesn't really change anything since that's the default before this patch, * 512 also for AX210/22000 family devices that don't do HE. Theoretically, for devices lower than AX210, we wouldn't have to allocate that many RBs if the RB size was manually increased, but to support that the code got more complex, and it didn't really seem necessary as that's a use case for monitor mode only, where hopefully the wasted memory isn't really much of a concern. Note that AX210 devices actually support bigger than 12-bit VID, which is required here as we want to allocate 4096 buffers plus some for quick recycling, so adjust the code for that as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-20iwlwifi: bump FW API to 52 for 22000 seriesLuca Coelho
Start supporting API version 52 for 22000 series. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-11-15iwlwifi: 22000: fix some indentationJohannes Berg
Somehow two tabs snuck into this file where just one should be used, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: remove IWL_DEVICE_22560/IWL_DEVICE_FAMILY_22560Johannes Berg
This is dead code, nothing uses the IWL_DEVICE_22560 macro and thus nothing every uses IWL_DEVICE_FAMILY_22560. Remove it all. While at it, remove some code and definitions used only in this case, and clean up some comments/names that still refer to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: bump FW API to 51 for 22000 seriesLuca Coelho
Start supporting API version 51 for 22000 series. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 21:57:34 +0000