summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/cfg/9000.c
AgeCommit message (Collapse)Author
2023-06-21wifi: iwlwifi: cfg: remove trailing dash from FW_PRE constantsJohannes Berg
We have the trailing dash here, but that complicates all the code. Simplify this by removing the dashes, adding them to the *_MODULE_FIRMWARE macros, and adjusting the code using this accordingly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230621130443.72240ca13b83.I1f4ed547f0964719ed98a3ef928080462d594491@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-08-26iwlwifi: read MAC address from correct place on BzJohannes Berg
On Bz devices, the MAC address CSRs changed from 0x380 to 0x30. Change the boolean configuration "mac_addr_from_csr" to hold the base address instead, and set it correctly for the different devices using this feature. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210802215208.928c7983f014.Ic5ba92d98946c1b4640280a05dcfd75119c0f0c0@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-06-22iwlwifi: add 9560 killer deviceybaruch
add new killer devices configurations. Signed-off-by: ybaruch <yaara.baruch@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210621103449.4179f7191531.I3d5ed6b2b39fcd42863a679e21bda23a6c14253e@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: add 160Mhz to killer 1550 nameybaruch
change the name of 1550 killer device to 160Mhz. Signed-off-by: ybaruch <yaara.baruch@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.b87618a26ff8.Icf1d9c150ec108f30ce0e72c18b9350da6ae5087@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-11iwlwifi: remove max_ht_ampdu_exponent config parameterJohannes Berg
This always has the same value, since we don't have any devices with different values; remove the parameter. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210171218.50d11cbb073f.Ia44d022a4c549eb5fe0254fb20c62aa8d0bba634@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-12-10iwlwifi: use SPDX tagsJohannes Berg
Use SPDX tags instead of the long copyright notices. Also cleanup some duplicate copyright notices and combine the years where possible. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-10-08iwlwifi: pcie: fix xtal latency for 9560 devicesLuca Coelho
We were using a very high latency for all 9560 devices so they all would have time to stabilize. But this causes the system to be slighly slower, so we can use the best values for each device. This requires a new trans cfg struct for devices with longer latency and some adjustments to the other structs. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.34392f98fdb1.I3d3db14f6d1a8ecc547ca6afce8488816bd26081@changeid
2020-03-27iwlwifi: move integrated, extra_phy and soc_latency to trans_cfgLuca Coelho
These values are selected based on the PCI device ID, so the decision to use them can be made early. By moving them to the trans_cfg, we avoid duplicating the large cfg structs for small pieces of data (sometimes a single boolean). This will also allow us to make more decisions based on, for instance, the SoC type in used. The trans_cfg concept changes a bit, because previously it was used only to boot the device before reading further characteristics and now it also contains more data that is associated with the device ID. Change-Id: Ib71b07ea9e322eb74571dc5e8aa58f17eece5c9c Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: remove redundant iwl9560_2ac_cfg structLuca Coelho
The iwl9560_2ac_cfg struct is used for PNJ devices and the configuration is the same as iwl9260_2ac_cfg, so we can remove the former to avoid redundancy. Change-Id: I17ac1802f00bd80006930b922a9fc21df60e3c16 Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-17iwlwifi: remove trans entries from COMMON 9260 macroLuca Coelho
These entries are decided at runtime using the new parameters now, so they are not needed in the macro that is reused in the configs. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.3387a6c8fdbe.I98284457f26c5695754964b28f0257a7dc7c6b1c@changeid
2020-03-17iwlwifi: move shared clock entries to new tableLuca Coelho
These devices can now also be fully differentiated by using the new parameters. Move them all to the new table format. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.11c65d195677.I8faf50b325282df4892520a3b21fbdedabbb64f0@changeid
2020-03-17iwlwifi: move pu devices to new tableLuca Coelho
All the pu devices can now be differentiated using the new parameters, so move them all to the new tables accordingly. This also includes removal of a few deprecated IDs and redundant cfg structs. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.e7dc61e665f3.I44dcf9195bb8cc9e8c8e3e87182e9185c819a99d@changeid
2020-03-17iwlwifi: remove 9260 devices with 0x1010 and 0x1210 subsytem IDsLuca Coelho
These devices don't exist anymore, so remove them from the tables. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.fef62aa45887.I302e32b7cfff7da0d920547fae60ad9f2296e052@changeid
2020-03-17iwlwifi: convert the 9260-1x1 device to use the new parametersLuca Coelho
The 9260-1x1 device can be differentiated using the PCI device ID. There is a single occurrence of this device, so continue relying on the device and subsystem device IDs. The name of this device was incorrect, so add a new string specifically for it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.4d74e1be7cac.Id27bd9c878b73cb771691cbe6082fd40e079b44d@changeid
2020-03-17iwlwifi: move TH1 devices to the new tableLuca Coelho
TH1 devices can now be fully differentiated by using the device parameters we have (particularly the RF_TYPE). Start using these parameters instead of hardcoding to specific subsystem device IDs. This also fixes the name of one of the TH1 devices that was erroneously using the 9260 struct and renames 9160 to 9162. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.18d4304b5454.Ib168d186da88393e9ec46f0fca523edb48d9138e@changeid
2020-03-17iwlwifi: map 9461 and 9462 using RF type and RF IDLuca Coelho
These devices can be differentiated depending on the RF type and RF ID. Change them to use these instead of relying on the subsystem device IDs. This also fixes some names that were not including 160MHz (as they should). Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.345de1efb3ec.Ib9221027a955188ea7c1ffca8a45bccd6c1e6a13@changeid
2020-03-17iwlwifi: add GNSS differentiation to the device tablesLuca Coelho
Devices that also include a GNSS module have different names, so add a new device option to differentiate them, according to the values we have in the modules section of the subsystem device ID. Additionally, convert the two applicable devices to use this value instead of hardcoded subsystem IDs. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.1f958e558d05.I45492bb57cbbeb4cc0ec84313bade4def7377a27@changeid
2020-03-17iwlwifi: combine 9260 cfgs that only change namesLuca Coelho
All the 0x2526 devices are now in the new table, so we can start reusing configurations and adding the strings independently to all of them, reusing them when possible. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.88e3d47c42a8.I1bd37ae0d0f9f79732f03badf84d7d063993b73e@changeid
2020-03-17iwlwifi: move the remaining 0x2526 configs to the new tableLuca Coelho
Now that we have the strings separate from the rest, we can move the remaining 0x2526 devices to the new table in preparation to reuse the configs. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.a7998f8d7507.I4be8776edb8c30416efc184c66f11add5eed06de@changeid
2020-01-04iwlwifi: add device name to device_infoLuca Coelho
We have a lot of mostly duplicated data structures that are repeated only because the device name string is different. To avoid this, move the string from the cfg to the trans structure and add it independently from the rest of the configuration to the PCI mapping tables. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-01-04iwlwifi: implement a new device configuration tableLuca Coelho
Add a new device table that contains information that can be checked at runtime in order to decide which configuration to use. This allows us to map the full cfg independently from the tran-specific configuration. This is the first step in creating the new table. Subsequent patches will add the possibility of checking different values at runtime in order to make the decision. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-12-23iwlwifi: remove CSR registers abstractionLuca Coelho
We needed this abstraction for some CSR registers for IWL_DEVICE_22560, but that has been removed, so we don't need the abstraction anymore. Remove it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-12-23iwlwifi: allocate more receive buffers for HE devicesJohannes Berg
For HE-capable devices, we need to allocate more receive buffers as there could be 256 frames aggregated into a single A-MPDU, and then they might contain A-MSDUs as well. Until 22000 family, the devices are able to put multiple frames into a single RB and the default RB size is 4k, but starting from AX210 family this is no longer true. On the other hand, those newer devices only use 2k receive buffers (by default). Modify the code and configuration to allocate an appropriate number of RBs depending on the device capabilities: * 4096 for AX210 HE devices, which use 2k buffers by default, * 2048 for 22000 family devices which use 4k buffers by default, * 512 for existing 9000 family devices, which doesn't really change anything since that's the default before this patch, * 512 also for AX210/22000 family devices that don't do HE. Theoretically, for devices lower than AX210, we wouldn't have to allocate that many RBs if the RB size was manually increased, but to support that the code got more complex, and it didn't really seem necessary as that's a use case for monitor mode only, where hopefully the wasted memory isn't really much of a concern. Note that AX210 devices actually support bigger than 12-bit VID, which is required here as we want to allocate 4096 buffers plus some for quick recycling, so adjust the code for that as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: add monitor dumping supportShahar S Matityahu
Allow collecting monitor data in ini debug mode. Implement both SMEM and DRAM monitor regions dumping. For DRAM monitor, support DBGC1, DBGC2 and DBGC3 and support several DRAM fragments per DBGC. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06iwlwifi: separate elements from cfg that are needed by trans_allocLuca Coelho
In order to be able to select the cfg depending on the HW revision or on the RF ID, we need to set up the trans before selecting the cfg. To do so, move the elements from cfg that are needed by iwl_trans_alloc() to a separate struct at the top of the cfg, so it can be used by other cfg types as well, before selecting the rest of the configuration. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: add monitor header to smem monitorShahar S Matityahu
Add write pointer and cycle count registers to smem monitor header. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: bump FW API to 46 for 9000 and 22000 seriesJohannes Berg
Start supporting API version 46 where applicable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: bump FW API to 45 for 9000 and 22000 seriesLuca Coelho
Start supporting API version 45 where applicable. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-04iwlwifi: bump FW API to 44 for 9000 and 22000 seriesLuca Coelho
Start supporting API version 44 where applicable. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: update product name for 9260 and 9560Ihab Zhaika
update the product name for the some of the cards from the series of 9260 and 9560 Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: remove support for 9000 A-step devicesLuca Coelho
We don't support 9000 A-step devices anymore, so we can remove support for loading both the a0/a0 and a0/b0 FWs. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-20iwlwifi: bump the API version to 43 for 9000 and 22000Luca Coelho
Bump the API version to 43 for 9000 and 22000 devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-14iwlwifi: remove all unnecessary occurrences of nvm_calib_verLuca Coelho
Now that nvm_calib_ver is not checked in opmodes other than dvm, we can remove it from all irrelevant configurations. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: remove useless NVM_HW_SECTION_NUM_FAMILY_* macrosLuca Coelho
These macros are useless because each one of them is used only once and the element they are assigned to is already pretty clear about what they mean, "nvm_hw_section_num". Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: don't define OTP_LOW_IMAGE_SIZE per family, but per sizeLuca Coelho
Using OTP_LOW_IMAGE_SIZE_FAMILY_8000/9000/22000 only obfuscates the actual values, since these 3 are the same. Redefine the values per size so it's easier to understand and compare the different configurations. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: move common 9000 cfg parameters to common macroLuca Coelho
The ht_params, nvm_ver, nvm_calib_ver and max_ht_ampdu_exponent elements in 9000 devices are always the same. Move them to the common macro. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-06iwlwifi: bump firmware API version for 9000 and 22000 series devicesJohannes Berg
Bump the firmware API version to 41. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: add d3 debug data supportShahar S Matityahu
During d3, the firmware records debug data into internal buffer if debug data collection occurs, collect the data that was written to the buffer Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-05Merge tag 'wireless-drivers-next-for-davem-2018-08-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.19 This time a bigger pull request as we have two new Mediatek drivers MT76x2u (CONFIG_MT76x2U) and MT76x0U (CONFIG_MT76x0U). Also iwlwifi got support for the new IEEE 802.11ax standard, the successor for 802.11ac. And naturally smaller new features and bugfixes all over. Major changes: wcn36xx * fix WEP in client mode wil6210 * add support for Talyn-MB (Talyn ver 2.0) device * add support for enhanced DMA firmware feature iwlwifi * implement 802.11ax D2.0 * support for the new 22560 device family * new PCI IDs for 22000 and 22560 qtnfmac * implement cfg80211 power management callback * enable multiple SSIDs scan support * qtnfmac: implement basic WoWLAN support mt7601u * fall back to software encryption for hw unsupported ciphers * enable 802.11 Management Frame Protection (MFP) mt76 * support setting RTS threshold * add USB support * add support for MT76x2u devices * add support for MT76x0U devices mwifiex * allow user space to set all other IEs except WMM IE rsi * add firmware support for AP+BT dual mode ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-26iwlwifi: support multiple tfd queue max sizes for different devicesGolan Ben Ami
22560 devices tfd queue max size is 2^16. Allow a configurable max size in the driver for supporting different devices. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-25iwlwifi: add more card IDs for 9000 seriesEmmanuel Grumbach
Add new device IDs for the 9000 series. Cc: stable@vger.kernel.org # 4.14 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30iwlwifi: fix non_shared_ant for 9000 devicesErel Geron
The non-shared antenna was wrong for 9000 device series. Fix it to ANT_B for correct antenna preference by coex in MVM driver. Fixes: 89374fe60bfb ("iwlwifi: Add new PCI IDs for 9260 and 5165 series") Signed-off-by: Erel Geron <erelx.geron@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: cfg: remove unnecessary cfg data in non-dvm devicesLuca Coelho
The max_data_size and max_inst_size values are only needed for DVM devices. Remove the assignment to those fields in 7000 and newer families so we can also remove the otherwise unnecessary inclusion of iwl-agn.h headers. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: allow different csr flags for different device familiesGolan Ben Ami
Different device families may have different flag values for passing a message to the fw (i.e. SW_RESET). In order to keep the code readable, and avoid conditioning upon the family, store a value for each flag, which indicates the bit that needs to be enabled. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28iwlwifi: bump the max API version for 9000 and 22000 devicesEmmanuel Grumbach
We are now ready to load 38.ucode Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-16iwlwifi: add shared clock PHY config flag for some devicesLuca Coelho
Some devices use a shared clock which is very sensitive to variations and cause trouble in some situations. We need to set a bit in the phy configuration to indicate that to the FW. To make this generic, add a extra_phy_config_flags element to the device configuration and OR it into the phy_cfg before sending it to the firmware. And also create a set of configurations for devices that use shared clocks and need this extra bit to be set. Fixes: c62446d2b028 ("iwlwifi: add new 9460 series PCI IDs") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-05iwlwifi: bump FW API to 36 for 8000 and upLuca Coelho
Load version 36 of the API for these devices, if available. We skipped version 35. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-16iwlwifi: fix firmware names for 9000 and A000 series hwThomas Backlund
iwlwifi 9000 and a0000 series hw contains an extra dash in firmware file name as seeen in modinfo output for kernel 4.14: firmware: iwlwifi-9260-th-b0-jf-b0--34.ucode firmware: iwlwifi-9260-th-a0-jf-a0--34.ucode firmware: iwlwifi-9000-pu-a0-jf-b0--34.ucode firmware: iwlwifi-9000-pu-a0-jf-a0--34.ucode firmware: iwlwifi-QuQnj-a0-hr-a0--34.ucode firmware: iwlwifi-QuQnj-a0-jf-b0--34.ucode firmware: iwlwifi-QuQnj-f0-hr-a0--34.ucode firmware: iwlwifi-Qu-a0-jf-b0--34.ucode firmware: iwlwifi-Qu-a0-hr-a0--34.ucode Fix that by dropping the extra adding of '"-"'. Signed-off-by: Thomas Backlund <tmb@mageia.org> Cc: stable@vger.kernel.org # 4.13 Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-16iwlwifi: fix PCI IDs and configuration mapping for 9000 seriesLuca Coelho
A lot of PCI IDs were missing and there were some problems with the configuration and firmware selection for devices on the 9000 series. Fix the firmware selection by adding files for the B-steps; add configuration for some integrated devices; and add a bunch of PCI IDs (mostly for integrated devices) that were missing from the driver's list. Without this patch, a lot of devices will not be recognized or will try to load the wrong firmware file. Cc: stable@vger.kernel.org # 4.13 Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-18iwlwifi: define minimum valid address for umac_error_event_table in cfgLuca Coelho
We now have two different minimum valid values for umac_error_event_table. To avoid hardcoding the minimum value in the driver, add a value to cfg where it can be read from. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 07:23:37 +0000