summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/broadcom
AgeCommit message (Collapse)Author
2017-02-02brcmfmac: check brcmf_bus_get_memdump result for errorRafał Miłecki
This method may be unsupported (see: USB bus) or may just fail (see: SDIO bus). While at it rework logic in brcmf_sdio_bus_get_memdump function to avoid too many conditional code nesting levels. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-31brcmfmac: add .update_connect_params() callbackArend Van Spriel
Add support for the .update_connect_params() callback for roaming or subsequent (re)association. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-31brcmfmac: allow wowlan support to be per deviceArend Van Spriel
The wowlan support is (partially) determined dynamic by checking the device/firmware capabilities. So they can differ per device. So it is not possible to use a static global. Instead use the global as a template and use kmemdup(). When kmemdup() fails the template is used unmodified. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-31brcmfmac: fix handling firmware results for wowl netdetectArend Van Spriel
For wowl netdetect the event data changed for newer chips. This was recently fixed for scheduled scan, but same change is needed for wowl netdetect. Removing now pointles += operation from both result handlers. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-31brcmfmac: provide a value for struct wowlan_support::max_nd_match_setsArend Van Spriel
The driver advertises support for WOWLAN_NETDETECT but did not specify maximum amount of netdetect match sets. This was no issue due to a bug in nl80211. As that has been fixed, brcmfmac also needs fixing. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-28brcmfmac: drop duplicated core selection from brcmf_pcie_attachRafał Miłecki
It was left after reworking PCIe reset in commit 07fe2e38c7fd ("brcmfmac: Reset PCIE devices after recognition."). Cc: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-20brcmfmac: rename brcmf_bus_start function to brcmf_bus_startedRafał Miłecki
This intends to make init/attach process slightly easier to follow. What driver was doing in brcmf_bus_start wasn't bus specific at all and function brcmf_bus_stop wasn't undoing things done there. This function is supposed to be called by bus specific code when the bus is ready. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-20brcmfmac: drop brcmf_bus_detach and inline its codeRafał Miłecki
Driver used to call brcmf_bus_detach only from one place and it already contained a check for drvr not being NULL. We can get rid of this extra function, call brcmf_bus_stop directly and simplify the code. There also isn't brcmf_bus_attach function which one could expect so it looks more consistent this way. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-20brcmfmac: move brcmf_c_set_joinpref_default declaration to common.hRafał Miłecki
Function brcmf_c_set_joinpref_default is in common.c, so move it to the related header. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-20brcmfmac: drop unneeded function declarations from headersRafał Miłecki
Functions brcmf_c_prec_enq and brcmf_sdio_init don't exist so we really don't need their declarations. Function brcmf_parse_tlvs is used in cfg80211.c only so make it static and drop from header as well. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-20brcmfmac: fix incorrect event channel deductionGavin Li
brcmf_sdio_fromevntchan() was being called on the the data frame rather than the software header, causing some frames to be mischaracterized as on the event channel rather than the data channel. This fixes a major performance regression (due to dropped packets). With this patch the download speed jumped from 1Mbit/s back up to 40MBit/s due to the sheer amount of packets being incorrectly processed. Fixes: c56caa9db8ab ("brcmfmac: screening firmware event packet") Signed-off-by: Gavin Li <git@thegavinli.com> Cc: <stable@vger.kernel.org> # 4.7+ Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> [kvalo@codeaurora.org: improve commit logs based on email discussion] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-20brcmfmac: add support for BCM43455 with modalias sdio:c00v02D0dA9BFMartin Blumenstingl
BCM43455 is a more recent revision of the BCM4345. Some of the BCM43455 got a dedicated SDIO device ID which is currently not supported by brcmfmac. Adding the new sdio_device_id to brcmfmac is enough to get the BCM43455 supported because the chip itself is already supported (due to BCM4345 support in the driver). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-19brcmfmac: make brcmf_of_probe more genericRafał Miłecki
We may want to use Open Firmware for other devices than just SDIO ones. In future we may want to support more Broadcom properties so there is really no reason for such limitation. Call brcmf_of_probe for all kind of devices & move extra conditions to the body of that funcion. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-17brcmfmac: setup wiphy bands after registering it firstRafał Miłecki
During bands setup we disable all channels that firmware doesn't support in the current regulatory setup. If we do this before wiphy_register it will result in copying set flags (including IEEE80211_CHAN_DISABLED) to the orig_flags which is supposed to be persistent. We don't want this as regulatory change may result in enabling some channels. We shouldn't mess with orig_flags then (by changing them or ignoring them) so it's better to just take care of their proper values. This patch cleanups code a bit (by taking orig_flags more seriously) and allows further improvements like disabling really unavailable channels. We will need that e.g. if some frequencies should be disabled for good due to hardware setup (design). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-17brcmfmac: don't preset all channels as disabledRafał Miłecki
During init we take care of regulatory stuff by disabling all unavailable channels (see brcmf_construct_chaninfo) so this predisabling them is not really required (and this patch won't change any behavior). It will on the other hand allow more detailed runtime control over channels which is the main reason for this change. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-17brcmfmac: avoid writing channel out of allocated arrayRafał Miłecki
Our code was assigning number of channels to the index variable by default. If firmware reported channel we didn't predict this would result in using that initial index value and writing out of array. This never happened so far (we got a complete list of supported channels) but it means possible memory corruption so we should handle it anyway. This patch simply detects unexpected channel and ignores it. As we don't try to create new entry now, it's also safe to drop hw_value and center_freq assignment. For known channels we have these set anyway. I decided to fix this issue by assigning NULL or a target channel to the channel variable. This was one of possible ways, I prefefred this one as it also avoids using channel[index] over and over. Fixes: 58de92d2f95e ("brcmfmac: use static superset of channels for wiphy bands") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-02Merge tag 'wireless-drivers-next-for-davem-2017-01-02' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.11 The most notable change here is the inclusion of airtime fairness scheduling to ath9k. It prevents slow clients from hogging all the airtime and unfairly slowing down faster clients. Otherwise smaller changes and cleanup. Major changes: ath9k * cleanup eeprom endian handling * add airtime fairness scheduling ath10k * fix issues for new QCA9377 firmware version * support dev_coredump() for firmware crash dump * enable channel 169 on 5 GHz band ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-30brcmfmac: fix spelling mistakes on "Ivalid"Colin Ian King
Trivial fixes to spelling mistake "Ivalid" to "Invalid" in brcmf_err error messages. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-20brcmfmac: fix uninitialized field in scheduled scan ssid configurationArend Van Spriel
The scheduled scan ssid configuration in firmware has a flags field that was not initialized resulting in unexpected behaviour. Fixes: e3bdb7cc0300 ("brcmfmac: fix handling ssids in .sched_scan_start() callback") Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-20brcmfmac: fix memory leak in brcmf_cfg80211_attach()Arend Van Spriel
In brcmf_cfg80211_attach() there was one error path not properly handled as it leaked memory allocated in brcmf_btcoex_attach(). Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-16Makefile: drop -D__CHECK_ENDIAN__ from cflagsMichael S. Tsirkin
That's the default now, no need for makefiles to set it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
2016-12-02Merge tag 'wireless-drivers-next-for-davem-2016-12-01' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.10 Major changes: rsi * filter rx frames * configure tx power * make it possible to select antenna * support 802.11d brcmfmac * cleanup of scheduled scan code * support for bcm43341 chipset with different chip id * support rev6 of PCIe device interface ath10k * add spectral scan support for QCA6174 and QCA9377 families * show used tx bitrate with 10.4 firmware wil6210 * add power save mode support * add abort scan functionality * add support settings retry limit for short frames bcma * add Dell Inspiron 3148 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29brcmfmac: fix scheduled scan result handling for newer chipsArend Van Spriel
The scan results for scheduled scan as retrieved from the device have changed. A field has been added which is not needed. However, the appended info is. Luckily they are versioned so check that to find out the location of the appended data. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: use requested scan interval in scheduled scanArend Van Spriel
User-space can specify the interval for the scheduled scan. This interval is found in scheduled scan plan. The driver supports only one plan, which is legacy behaviour. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: remove restriction from .sched_scan_start() callbackArend Van Spriel
In the .sched_scan_start() callback a condition was checked whether a normal scan was ongoing. However, there is no need for this check as it is ok to start the scheduled scan irrespective whether or not a normal scan is ongoing. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: use provided channels for scheduled scanArend Van Spriel
User-space can provide list of channels in the schedule scan request. This was ignored so all channels supported and allowed by the device were used. This patch configures the device to use the channels as listed in the request. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: move scheduled scan activation to pno source fileArend Van Spriel
Rework .sched_scan_start() callback moving actual configuration of the device in pno source file. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: split up brcmf_pno_config() functionArend Van Spriel
The brcmf_pno_config() function handles two configurations in firmware. Split it and have caller sort out what is needed. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: make internal escan more genericArend Van Spriel
For scheduled scan we initiate an escan in firmware to obtain more info missing from the scheduled scan notification we get from firmware. For upcoming functionality this is also required so make it a bit more generic. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: change prototype for brcmf_do_escan()Arend Van Spriel
Reduce the number of parameters as the removed ones can be obtained through struct brcmf_if parameter. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: fix handling ssids in .sched_scan_start() callbackArend Van Spriel
The ssids list in the scheduled scan request were not properly taken into account when configuring in firmware. The hidden bit was set for any ssid resulting in active scanning for all. Only set it for ssids that are in the ssids list. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: move pno helper functions in separate source fileArend Van Spriel
Introducing new source file for pno related functionality. Moving existing pno functions. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: add support for 43341 chipArend Van Spriel
This chip was already supported, but seems a device came up giving a different chip identifier. So adding that effectively mapping to the same firmware file as for 43340 chip. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29brcmfmac: add pcie host dongle interface rev6 supportFranky Lin
In rev6 of pcie host dongle interface protocol, host needs to maximum supported ring number from dongle shared memory and set up ring buffer and ring indices offset accordingly. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-27Merge tag 'wireless-drivers-next-for-davem-2016-11-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.10 Major changes: iwlwifi * finalize and enable dynamic queue allocation * use dev_coredumpmsg() to prevent locking the driver * small fix to pass the AID to the FW * use FW PS decisions with multi-queue ath9k * add device tree bindings * switch to use mac80211 intermediate software queues to reduce latency and fix bufferbloat wl18xx * allow scanning in AP mode ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25brcmsmac: fix array out-of-bounds access in qm_log10Tobias Regnery
I get the following UBSAN warning during boot on my laptop: ================================================================================ UBSAN: Undefined behaviour in drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_qmath.c:280:21 index 32 is out of range for type 's16 [32]' CPU: 0 PID: 879 Comm: NetworkManager Not tainted 4.9.0-rc4 #28 Hardware name: LENOVO Lenovo IdeaPad N581/INVALID, BIOS 5ECN96WW(V9.01) 03/14/2013 ffff8800b74a6478 ffffffff828e59d2 0000000041b58ab3 ffffffff8398330c ffffffff828e5920 ffff8800b74a64a0 ffff8800b74a6450 0000000000000020 1ffffffff845848c ffffed0016e94bf1 ffffffffc22c2460 000000006b9c0514 Call Trace: [<ffffffff828e59d2>] dump_stack+0xb2/0x110 [<ffffffff828e5920>] ? _atomic_dec_and_lock+0x150/0x150 [<ffffffff82968c9d>] ubsan_epilogue+0xd/0x4e [<ffffffff82969875>] __ubsan_handle_out_of_bounds+0xfa/0x13e [<ffffffff8296977b>] ? __ubsan_handle_shift_out_of_bounds+0x241/0x241 [<ffffffffc0d48379>] ? bcma_host_pci_read16+0x59/0xa0 [bcma] [<ffffffffc0d48388>] ? bcma_host_pci_read16+0x68/0xa0 [bcma] [<ffffffffc212ad78>] ? read_phy_reg+0xe8/0x180 [brcmsmac] [<ffffffffc2184714>] qm_log10+0x2e4/0x350 [brcmsmac] [<ffffffffc2142eb8>] wlc_phy_init_lcnphy+0x538/0x1f20 [brcmsmac] [<ffffffffc2142980>] ? wlc_lcnphy_periodic_cal+0x5c0/0x5c0 [brcmsmac] [<ffffffffc1ba0c93>] ? ieee80211_open+0xb3/0x110 [mac80211] [<ffffffff82f73a02>] ? sk_busy_loop+0x1e2/0x840 [<ffffffff82f7a6ce>] ? __dev_change_flags+0xae/0x220 ... The report is valid: doing the math in this function, with an input value N=63 the variable s16tableIndex gets a value of 31. This value is used as an index in the array log_table with 32 entries. But the next line is: s16errorApproximation = (s16) qm_mulu16(u16offset, (u16) (log_table[s16tableIndex + 1] - log_table[s16tableIndex])); With s16tableIndex + 1 we are trying an out-of-bounds access to the array. The log_table array provides log2 values in q.15 format and the above statement tries an error approximation with the next value. To fix this issue add the next value to the array and update the comment accordingly. Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-23brcmfmac: update beacon IE after bss up and clear when AP stoppedWright Feng
Firmware doesn't update beacon/Probe Response vendor IEs correctly when bss is down, so we move brcmf_config_ap_mgmt_ie after BSS up. And host driver should clear IEs when AP stopped so that the IEs in host side will be synced with in firmware side. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-17brcmfmac: print name of connect status eventRafał Miłecki
This simplifies debugging. Format %s (%u) comes from similar debugging message in brcmf_fweh_event_worker. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09brcmfmac: proto: add callback for queuing TX dataRafał Miłecki
So far our core code was calling brcmf_fws_process_skb which wasn't a proper thing to do. If case of devices using msgbuf protocol fwsignal shouldn't be used. It was an unnecessary extra layer simply calling a protocol specifix txdata function. Please note we already have txdata callback, but it's used for calls between bcdc and fwsignal so it couldn't be simply used there. This makes core code more generic (instead of bcdc/fwsignal specific). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-10-27brcmfmac: avoid maybe-uninitialized warning in brcmf_cfg80211_start_apArnd Bergmann
A bugfix added a sanity check around the assignment and use of the 'is_11d' variable, which looks correct to me, but as the function is rather complex already, this confuses the compiler to the point where it can no longer figure out if the variable is always initialized correctly: brcm80211/brcmfmac/cfg80211.c: In function ‘brcmf_cfg80211_start_ap’: brcm80211/brcmfmac/cfg80211.c:4586:10: error: ‘is_11d’ may be used uninitialized in this function [-Werror=maybe-uninitialized] This adds an initialization for the newly introduced case in which the variable should not really be used, in order to make the warning go away. Fixes: b3589dfe0212 ("brcmfmac: ignore 11d configuration errors") Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-10-27wireless: deprecate WDS and disable by defaultJohannes Berg
The old WDS 4-addr frame support is very limited, e.g. * no encryption is possible on such links * it cannot support rate/HT/VHT negotiation * management APIs are very restricted These make the WDS legacy mode useless in practice. All of these are resolved by the 4-addr AP/client support, so there's also no reason to improve WDS in the future. Therefore, add a Kconfig option to disable legacy WDS. This gives people an "emergency valve" while they migrate to the better-supported 4-addr AP/client option; we plan to remove it (and the associated cfg80211/mac80211 code, which is the ultimate goal) in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-13cfg80211: pass struct to interface combination check/iterPurushottam Kushwaha
Move the growing parameter list to a structure for the interface combination check and iteration functions in cfg80211 and mac80211 to make the code easier to understand. Signed-off-by: Purushottam Kushwaha <pkushwah@qti.qualcomm.com> [edit commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) BBR TCP congestion control, from Neal Cardwell, Yuchung Cheng and co. at Google. https://lwn.net/Articles/701165/ 2) Do TCP Small Queues for retransmits, from Eric Dumazet. 3) Support collect_md mode for all IPV4 and IPV6 tunnels, from Alexei Starovoitov. 4) Allow cls_flower to classify packets in ip tunnels, from Amir Vadai. 5) Support DSA tagging in older mv88e6xxx switches, from Andrew Lunn. 6) Support GMAC protocol in iwlwifi mwm, from Ayala Beker. 7) Support ndo_poll_controller in mlx5, from Calvin Owens. 8) Move VRF processing to an output hook and allow l3mdev to be loopback, from David Ahern. 9) Support SOCK_DESTROY for UDP sockets. Also from David Ahern. 10) Congestion control in RXRPC, from David Howells. 11) Support geneve RX offload in ixgbe, from Emil Tantilov. 12) When hitting pressure for new incoming TCP data SKBs, perform a partial rathern than a full purge of the OFO queue (which could be huge). From Eric Dumazet. 13) Convert XFRM state and policy lookups to RCU, from Florian Westphal. 14) Support RX network flow classification to igb, from Gangfeng Huang. 15) Hardware offloading of eBPF in nfp driver, from Jakub Kicinski. 16) New skbmod packet action, from Jamal Hadi Salim. 17) Remove some inefficiencies in snmp proc output, from Jia He. 18) Add FIB notifications to properly propagate route changes to hardware which is doing forwarding offloading. From Jiri Pirko. 19) New dsa driver for qca8xxx chips, from John Crispin. 20) Implement RFC7559 ipv6 router solicitation backoff, from Maciej Żenczykowski. 21) Add L3 mode to ipvlan, from Mahesh Bandewar. 22) Support 802.1ad in mlx4, from Moshe Shemesh. 23) Support hardware LRO in mediatek driver, from Nelson Chang. 24) Add TC offloading to mlx5, from Or Gerlitz. 25) Convert various drivers to ethtool ksettings interfaces, from Philippe Reynes. 26) TX max rate limiting for cxgb4, from Rahul Lakkireddy. 27) NAPI support for ath10k, from Rajkumar Manoharan. 28) Support XDP in mlx5, from Rana Shahout and Saeed Mahameed. 29) UDP replicast support in TIPC, from Richard Alpe. 30) Per-queue statistics for qed driver, from Sudarsana Reddy Kalluru. 31) Support BQL in thunderx driver, from Sunil Goutham. 32) TSO support in alx driver, from Tobias Regnery. 33) Add stream parser engine and use it in kcm. 34) Support async DHCP replies in ipconfig module, from Uwe Kleine-König. 35) DSA port fast aging for mv88e6xxx driver, from Vivien Didelot. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1715 commits) mlxsw: switchx2: Fix misuse of hard_header_len mlxsw: spectrum: Fix misuse of hard_header_len net/faraday: Stop NCSI device on shutdown net/ncsi: Introduce ncsi_stop_dev() net/ncsi: Rework the channel monitoring net/ncsi: Allow to extend NCSI request properties net/ncsi: Rework request index allocation net/ncsi: Don't probe on the reserved channel ID (0x1f) net/ncsi: Introduce NCSI_RESERVED_CHANNEL net/ncsi: Avoid unused-value build warning from ia64-linux-gcc net: Add netdev all_adj_list refcnt propagation to fix panic net: phy: Add Edge-rate driver for Microsemi PHYs. vmxnet3: Wake queue from reset work i40e: avoid NULL pointer dereference and recursive errors on early PCI error qed: Add RoCE ll2 & GSI support qed: Add support for memory registeration verbs qed: Add support for QP verbs qed: PD,PKEY and CQ verb support qed: Add support for RoCE hw init qede: Add qedr framework ...
2016-10-03Merge tag 'driver-core-4.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here are the "big" driver core patches for 4.9-rc1. Also in here are a number of debugfs fixes that cropped up due to the changes that happened in 4.8 for that filesystem. Overall, nothing major, just a few fixes and cleanups. All of these have been in linux-next with no reported issues" * tag 'driver-core-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (23 commits) drivers: dma-coherent: Move spinlock in dma_alloc_from_coherent() drivers: dma-coherent: Fix DMA coherent size for less than page MAINTAINERS: extend firmware_class maintainer list debugfs: propagate release() call result driver-core: platform: Catch errors from calls to irq_get_irq_data sysfs print name of undiscoverable attribute group carl9170: fix debugfs crashes b43legacy: fix debugfs crash b43: fix debugfs crash debugfs: introduce a public file_operations accessor device core: Remove deprecated create_singlethread_workqueue drivers/base dmam_declare_coherent_memory leaks platform: don't return 0 from platform_get_irq[_byname]() on error cpu: clean up register_cpu func dma-mapping: use vma_pages(). drivers: dma-coherent: use vma_pages(). attribute_container: Fix typo base: soc: make it explicitly non-modular drivers: base: dma-mapping: page align the size when unmap_kernel_range platform driver: fix use-after-free in platform_device_del() ...
2016-09-27brcmfmac: use correct skb freeing helper when deleting flowringRafał Miłecki
Flowrings contain skbs waiting for transmission that were passed to us by netif. It means we checked every one of them looking for 802.1x Ethernet type. When deleting flowring we have to use freeing function that will check for 802.1x type as well. Freeing skbs without a proper check was leading to counter not being properly decreased. This was triggering a WARNING every time brcmf_netdev_wait_pend8021x was called. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arend van Spriel <arend@broadcom.com> Cc: stable@vger.kernel.org # 4.5+ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-27brcmfmac: replace WARNING on timeout with a simple error messageRafał Miłecki
Even with timeout increased to 950 ms we get WARNINGs from time to time. It mostly happens on A-MPDU stalls (e.g. when station goes out of range). It may take up to 5-10 secods for the firmware to recover and for that time it doesn't process packets. It's still useful to have a message on time out as it may indicate some firmware problem and incorrect key update. Raising a WARNING however wasn't really that necessary, it doesn't point to any driver bug anymore and backtrace wasn't much useful. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: drop unused fields from struct brcmf_pubRafał Miłecki
They seem to be there from the first day. We calculate these values but never use them. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: fix memory leak in brcmf_fill_bss_paramRafał Miłecki
This function is called from get_station callback which means that every time user space was getting/dumping station(s) we were leaking 2 KiB. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Fixes: 1f0dc59a6de ("brcmfmac: rework .get_station() callback") Cc: stable@vger.kernel.org # 4.2+ Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: simplify mapping of auth typeHante Meuleman
The 802.11 standard only has four valid auth type configurations of which our firmware only supports two, ie. Open System and Shared Key. Simplify the mapping falling back to automatic for other types specified by user-space. Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>