summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/broadcom
AgeCommit message (Collapse)Author
2017-12-02brcmfmac: change driver unbind order of the sdio function devicesArend Van Spriel
In the function brcmf_sdio_firmware_callback() the driver is unbound from the sdio function devices in the error path. However, the order in which it is done resulted in a use-after-free issue (see brcmf_ops_sdio_remove() in bcmsdh.c). Hence change the order and first unbind sdio function #2 device and then unbind sdio function #1 device. Cc: stable@vger.kernel.org # v4.12.x Fixes: 7a51461fc2da ("brcmfmac: unbind all devices upon failure in firmware callback") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-11-11brcmfmac: add CLM download supportChung-Hsien Hsu
The firmware for brcmfmac devices includes information regarding regulatory constraints. For certain devices this information is kept separately in a binary form that needs to be downloaded to the device. This patch adds support to download this so-called CLM blob file. It uses the same naming scheme as the other firmware files with extension of .clm_blob. The CLM blob file is optional. If the file does not exist, the download process will be bypassed. It will not affect the driver loading. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: move configuration of probe request IEsArend Van Spriel
The configuration of the IEs for probe requests was done in a P2P related function, which is not very obvious. Moving it to .scan callback function, ie. brcmf_cfg80211_scan(). Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: get rid of struct brcmf_cfg80211_info::active_scan fieldArend Van Spriel
The field struct brcmf_cfg80211_info::active_scan is set to true upon initializing the driver instance, but it is never changed so simply get rid of it. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: get rid of brcmf_cfg80211_escan() functionArend Van Spriel
The function brcmf_cfg80211_escan() is only called by brcmf_cfg80211_scan() so there is no reason to split in two function especially since the latter does not do an awful lot. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: use msecs_to_jiffies() instead of calculation using HZArend Van Spriel
Minor cleanup using provided macro to convert milliseconds interval to jiffies in brcmf_cfg80211_escan(). Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: cleanup brcmf_cfg80211_escan() functionArend Van Spriel
The function brcmf_cfg80211_escan() was always called with a non-null request parameter and null pointer for this_ssid parameter. Clean up the function removing the dead code path. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: disable packet filtering in promiscuous modeFranky Lin
Disable arp and nd offload to allow all packets sending to host. Reported-by: Phil Elwell <phil@raspberrypi.org> Tested-by: Phil Elwell <phil@raspberrypi.org> Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: handle FWHALT mailbox indicationArend Van Spriel
The firmware uses a mailbox to communicate to the host what is going on. In the driver we validate the bit received. Various people seen the following message: brcmfmac: brcmf_sdio_hostmail: Unknown mailbox data content: 0x40012 Bit 4 is cause of this message, but this actually indicates the firmware has halted. Handle this bit by giving a more meaningful error message. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-04Merge tag 'wireless-drivers-next-for-davem-2017-11-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.15 Mostly fixes this time, but also few new features. Major changes: wil6210 * remove ssid debugfs file rsi * add WOWLAN support for suspend, hibernate and shutdown states ath10k * add support for CCMP-256, GCMP and GCMP-256 ciphers on hardware where it's supported (QCA99x0 and QCA4019) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27brcmsmac: reindent split functionsArnd Bergmann
In the previous commit I left the indentation alone to help reviewing the patch, this one now runs the three new functions through 'indent -kr -8' with some manual fixups to avoid silliness. No changes other than whitespace are intended here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-27brcmsmac: split up wlc_phy_workarounds_nphyArnd Bergmann
The stack consumption in this driver is still relatively high, with one remaining warning if the warning level is lowered to 1536 bytes: drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:17135:1: error: the frame size of 1880 bytes is larger than 1536 bytes [-Werror=frame-larger-than=] The affected function is actually a collection of three separate implementations, and each of them is fairly large by itself. Splitting them up is done easily and improves readability at the same time. I'm leaving the original indentation to make the review easier. Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-20Merge tag 'wireless-drivers-next-for-davem-2017-10-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.15 The first pull request for 4.15, unusually late this time but still relatively small. Also includes merge from wireless-drivers to fix conflicts in iwlwifi. Major changes: rsi * add P2P mode support * sdio suspend and resume support iwlwifi * A fix and an addition for PCI devices for the A000 family * Dump PCI registers when an error occurs, to make it easier to debug rtlwifi * add support for 64 bit DMA, enabled with a module parameter * add module parameter to enable ASPM ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo
Mark Brown reported that there are conflicts in iwlwifi between the two trees so fix those now.
2017-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Just simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02brcmfmac: Delete redundant length checkKevin Cernekee
brcmf_fweh_process_event() sets event->datalen to the endian-swapped value of event_packet->msg.datalen, which is the same as emsg.datalen. This length is already validated in brcmf_fweh_process_event(), so there is no need to check it again upon dequeuing the event. Suggested-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-02brcmfmac: Avoid possible out-of-bounds readKevin Cernekee
In brcmf_p2p_notify_rx_mgmt_p2p_probereq(), chanspec is assigned before the length of rxframe is validated. This could lead to uninitialized data being accessed (but not printed). Since we already have a perfectly good endian-swapped copy of rxframe->chanspec in ch.chspec, and ch.chspec is not modified by decchspec(), avoid the extra assignment and use ch.chspec in the debug print. Suggested-by: Mattias Nissler <mnissler@chromium.org> Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-02brcmsmac: make some local variables 'static const' to reduce stack sizeArnd Bergmann
With KASAN and a couple of other patches applied, this driver is one of the few remaining ones that actually use more than 2048 bytes of kernel stack: broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function 'wlc_phy_workarounds_nphy_gainctrl': broadcom/brcm80211/brcmsmac/phy/phy_n.c:16065:1: warning: the frame size of 3264 bytes is larger than 2048 bytes [-Wframe-larger-than=] broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function 'wlc_phy_workarounds_nphy': broadcom/brcm80211/brcmsmac/phy/phy_n.c:17138:1: warning: the frame size of 2864 bytes is larger than 2048 bytes [-Wframe-larger-than=] Here, I'm reducing the stack size by marking as many local variables as 'static const' as I can without changing the actual code. This is the first of three patches to improve the stack usage in this driver. It would be good to have this backported to stabl kernels to get all drivers in 'allmodconfig' below the 2048 byte limit so we can turn on the frame warning again globally, but I realize that the patch is larger than the normal limit for stable backports. The other two patches do not need to be backported. Cc: <stable@vger.kernel.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-02brcmfmac: Add check for short event packetsKevin Cernekee
The length of the data in the received skb is currently passed into brcmf_fweh_process_event() as packet_len, but this value is not checked. event_packet should be followed by DATALEN bytes of additional event data. Ensure that the received packet actually contains at least DATALEN bytes of additional data, to avoid copying uninitialized memory into event->data. Cc: <stable@vger.kernel.org> # v3.8 Suggested-by: Mattias Nissler <mnissler@chromium.org> Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-25b43: make const arrays static, reduces object code sizeColin Ian King
Don't populate const arrays on the stack, instead make them static. Makes the object code smaller by over 60 bytes: Before: text data bss dec hex filename 14816 1296 0 16112 3ef0 b43/phy_ht.o After: text data bss dec hex filename 14551 1496 0 16047 3eaf b43/phy_ht.o (gcc 6.3.0, x86-64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-25brcmsmac: make const array ucode_ofdm_rates static, reduces object code sizeColin Ian King
Don't populate const array ucode_ofdm_rates on the stack, instead make it static. Makes the object code smaller by 100 bytes: Before: text data bss dec hex filename 39482 564 0 40046 9c6e phy_cmn.o After text data bss dec hex filename 39326 620 0 39946 9c0a phy_cmn.o (gcc 6.3.0, x86-64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-25brcmfmac: use setup_timer() helperAllen Pais
Use setup_timer function instead of initializing timer with the function and data fields. Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-21drivers: net: brcm80211: use setup_timer() helper.Allen Pais
Use setup_timer function instead of initializing timer with the function and data fields. Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20b43legacy: fix unitialized reads of ret by initializing the array to zeroColin Ian King
The u8 char array ret is not being initialized and elements outside the range start to end contain just garbage values from the stack. This results in a later scan of the array to read potentially uninitialized values. Fix this by initializing the array to zero. This seems to have been an issue since the very first commit. Detected by CoverityScan CID#139653 ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Michael Buesch <m@bues.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20b43: fix unitialized reads of ret by initializing the array to zeroColin Ian King
The u8 char array ret is not being initialized and elements outside the range start to end contain just garbage values from the stack. This results in a later scan of the array to read potentially uninitialized values. Fix this by initializing the array to zero. This seems to have been an issue since the very first commit. Detected by CoverityScan CID#139652 ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Michael Buesch <m@bues.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20brcmfmac: setup passive scan if requested by user-spaceArend Van Spriel
The driver was not properly configuring firmware with regard to the type of scan. It always performed an active scan even when user-space was requesting for passive scan, ie. the scan request was done without any SSIDs specified. Cc: stable@vger.kernel.org # v4.0.x Reported-by: Huang, Jiangyang <Jiangyang.Huang@itron.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20brcmfmac: add length check in brcmf_cfg80211_escan_handler()Arend Van Spriel
Upon handling the firmware notification for scans the length was checked properly and may result in corrupting kernel heap memory due to buffer overruns. This fix addresses CVE-2017-0786. Cc: stable@vger.kernel.org # v4.0.x Cc: Kevin Cernekee <cernekee@chromium.org> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-08brcmfmac: feature check for multi-scheduled scan fails on bcm4345 devicesIan W MORRISON
The firmware feature check introduced for multi-scheduled scan is also failing for bcm4345 devices resulting in a firmware crash. The reason for this crash has not yet been root cause so this patch avoids the feature check for those device as a short-term fix. Fixes: 9fe929aaace6 ("brcmfmac: add firmware feature detection for gscan feature") Cc: <stable@vger.kernel.org> # v4.13 Signed-off-by: Ian W MORRISON <ianwmorrison@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-31brcmfmac: Log chip id and revisionHans de Goede
For debugging some problems, it is useful to know the chip revision add a brcmf_info message logging this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo
Stephen Rothwell reported quite a few conflicts in iwlwifi between wireless-drivers and wireless-drivers-next. To avoid any problems later in other trees merge w-d to w-d-next to fix those conflicts early.
2017-08-14brcmfmac: feature check for multi-scheduled scan fails on bcm4343x devicesArend Van Spriel
The firmware feature check introduced for multi-scheduled scan turned out to be failing for bcm4343{0,1,8} devices resulting in a firmware crash. The reason for this crash has not yet been root cause so this patch avoids the feature check for those device as a short-term fix. Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reported-by: Ian Molton <ian@mnementh.co.uk> Fixes: 9fe929aaace6 ("brcmfmac: add firmware feature detection for gscan feature") Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-11brcm80211: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08brcmfmac: add setting carrier state ON for successful roamingChung-Hsien Hsu
After association, ping is not working when sweeping the channel at the AP side. It is caused by having incorrect carrier state (OFF) for the STA in successful roaming. This patch sets the carrier state ON for the case. Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08brcmfmac: fix wrong num_different_channels when mchan feature enabledWright Feng
When the device/firmware supports multi-channel, it can have P2P connection and regular connection with AP simultaneous. In this case, the num_different_channels in wiphy info was not correct when firmware supports multi-channel (The iw wiphy# info showed "#channels <= 1" in interface combinations). It caused association failed and error message "CTRL-EVENT-FREQ-CONFLICT error" in wpa_supplicant when P2P GO interface was running at the same time. The root cause is that the num_different_channels was always overridden to 1 in brcmf_setup_ifmodes even multi-channel was enabled. We correct the logic by moving num_different_channels setting forward. Signed-off-by: Wright Feng <wright.feng@cypress.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08brcmfmac: Add support for CYW4373 SDIO/USB chipsetChi-Hsien Lin
Add support for CYW4373 SDIO/USB chipset. CYW4373 is a 1x1 dual-band 11ac chipset with 20/40/80Mhz channel support. It's a WiFi/BT combo device. Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08brcmfmac: set wpa_auth to WPA_AUTH_DISABLED in AP/OPEN security modeWright Feng
When setting wpa_auth to WPA_AUTH_NONE(1) in AP mode with WEP security, firmware will set privacy bit and add WPA OUI in VENDOR IE in beacon and probe response. The security type in softAP beacons confuse the supplicant in client side, and the user client will see [WPA-?] in supplicant scan result. So we set WPA_AUTH_DISABLED in softAP mode with OPEN security. Signed-off-by: Wright Feng <wright.feng@cypress.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-07Merge tag 'wireless-drivers-next-for-davem-2017-08-07' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.14 The first wireless-drivers-next pull request for 4.14. I'm submitting this unusally late in the cycle as my vacation postponed this. But even if this is late there's not still that much new features, mostly cleanup or fixes. Major changes: ath10k * preparation for wcn3990 support iwlwifi * Reorganization of the code into separate directories continues qtnfmac * regulatory support updates * add get_channel, dump_survey and channel_switch cfg80211 handlers ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two minor conflicts in virtio_net driver (bug fix overlapping addition of a helper) and MAINTAINERS (new driver edit overlapping revamp of PHY entry). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-28brcmfmac: constify pci_device_idArvind Yadav
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-27brcmfmac: fix memleak due to calling brcmf_sdiod_sgtable_alloc() twiceArend Van Spriel
Due to a bugfix in wireless tree and the commit mentioned below a merge was needed which went haywire. So the submitted change resulted in the function brcmf_sdiod_sgtable_alloc() being called twice during the probe thus leaking the memory of the first call. Cc: stable@vger.kernel.org # 4.6.x Fixes: 4d7928959832 ("brcmfmac: switch to new platform data") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-27brcmfmac: Don't grow SKB by negative sizeDaniel Stone
The commit to rework the headroom check in start_xmit() now calls pxskb_expand_head() unconditionally if the header is CoW. Unfortunately, it does so with the delta between the extant headroom and the header length, which may be negative if there is already sufficient headroom. pskb_expand_head() does allow for size being 0, in which case it just copies, so clamp the header delta to zero. Opening Chrome (and all my tabs) on a PCIE device was enough to reliably hit this. Fixes: 270a6c1f65fe ("brcmfmac: rework headroom check in .start_xmit()") Signed-off-by: Daniel Stone <daniels@collabora.com> Cc: Arend Van Spriel <arend.vanspriel@broadcom.com> Cc: James Hughes <james.hughes@raspberrypi.org> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Cc: Franky Lin <franky.lin@broadcom.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-25drivers/net: Fix ptr_ret.cocci warnings.Tonghao Zhang
we can use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR 1. drivers/net/appletalk/ipddp.c 2. drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21brcmfmac: fix regression in brcmf_sdio_txpkt_hdalign()Arend Van Spriel
Recent change in brcmf_sdio_txpkt_hdalign() changed the behavior and now always returns 0. This resulted in a regression which basically renders the device useless. Fixes: 270a6c1f65fe ("brcmfmac: rework headroom check in .start_xmit()") Reported-by: S. Gilles <sgilles@math.umd.edu> Tested-by: S. Gilles <sgilles@math.umd.edu> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-12brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx()Arend van Spriel
The lower level nl80211 code in cfg80211 ensures that "len" is between 25 and NL80211_ATTR_FRAME (2304). We subtract DOT11_MGMT_HDR_LEN (24) from "len" so thats's max of 2280. However, the action_frame->data[] buffer is only BRCMF_FIL_ACTION_FRAME_SIZE (1800) bytes long so this memcpy() can overflow. memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN], le16_to_cpu(action_frame->len)); Cc: stable@vger.kernel.org # 3.9.x Fixes: 18e2f61db3b70 ("brcmfmac: P2P action frame tx.") Reported-by: "freenerguo(郭大兴)" <freenerguo@tencent.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 14:33:13 +0000