summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/brcm80211/brcmfmac
AgeCommit message (Collapse)Author
2014-01-06brcmfmac: add sdio drive strength programming for bcm4334 chipsetArend van Spriel
The table for BCM4334 SDIO drive strength programming was missing from the driver. Adding it with this patch set. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06brcmfmac: correct reporting HT40 support in wiphy htcapArend van Spriel
Using 'iw phy' only showed HT20 support in the HT capabilities info. This patch determines support for HT40 using a firmware query that is supposed to work for all supported devices. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06brcmfmac: cleanup helper functions in sdio probe pathArend van Spriel
Moving code from helper functions to the calling function as it makes code easier to read. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06brcmfmac: cleanup helper functions in sdio remove pathArend van Spriel
Two helper functions in the sdio remove path were very thin and only used once. So its code is moved to the calling function. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06brcmfmac: Limit control message length from host to device.Hante Meuleman
An control request or set message length is restricted to ETH frame length for the buffer from host to device. This is limitation is imposed by the firmware. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06brcmfmac: Remove some obsolete definitions and variables.Hante Meuleman
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06brcmfmac: rework SDIO register access functionsArend van Spriel
The logic in the SDIO register access functions was hard to read and contained a lot of conditional code path. This rework attempts to clean it up. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03net: wireless: brcm80211: Drop debug version with build date/timeJosh Triplett
The kernel already has this information, and individual drivers shouldn't duplicate that. This also eliminates the use of __DATE__ and __TIME__, which make the build non-deterministic. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2014-01-01Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-12-26wireless: slight optimization of addr comparedingtianhong
Use possibly more efficient ether_addr_equal or ether_addr_equal_unaligned instead of memcmp. Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19cfg80211: Add support for QoS mappingKyeyoon Park
This allows QoS mapping from external networks to be implemented as defined in IEEE Std 802.11-2012, 10.24.9. APs can use this to advertise DSCP ranges and exceptions for mapping frames to a specific UP over Wi-Fi. The payload of the QoS Map Set element (IEEE Std 802.11-2012, 8.4.2.97) is sent to the driver through the new NL80211_ATTR_QOS_MAP attribute to configure the local behavior either on the AP (based on local configuration) or on a station (based on information received from the AP). Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18brcmfmac: clarify struct brcmf_sdio_dev::func[0] referenceArend van Spriel
The struct brcmf_sdio_dev contains array of sdio functions that are used in the driver. However, during probe func[0] entry was assigned to the function 1 reference. This was corrected upon doing the actual I/O access. This patch makes it more clear by creating the func[0] entry properly and use it as is during I/O access. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: remove brcmf_sdio_disconnect() functionArend van Spriel
Instead of calling brcmf_sdio_disconnect() expose brcmf_sdio_remove() and call it directly. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: use consistent function names in dhd_sdio.cArend van Spriel
Functions in dhd_sdio.c that are called with struct brcmf_sdio instance are renamed consistently with brcmf_sdio_ prefix. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: Combine protocol push hdr and bus txdata.Hante Meuleman
For the transmission of data a protocol push hdr is performed followed by a bus txdata call. For the new protocol msgbuf this is not workable. Since they are already "loosely" coupled for bcdc protocol they are combined. This means that txdata will go "through" the protocol layer and a seperate protocol push hdr will not be needed anymore. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: Add definition of new protocol layer msgbuf.Hante Meuleman
A new protocol layer msgbuf will be added in the future. This change makes it possible to select the desired layer by the bus driver. USB and SDIO will select BCDC. At the moment nothing is being done with this information. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: Fix hex dump for FWIL.Hante Meuleman
The debug function brcmf_dbg_hex_dump API got changed and the information string should preferably contain a \n at the end of the string. Update the FWIL so debug output looks better. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: Move common BCDC code in single function.Hante Meuleman
The BCDC functions query_dcmd and set_dcmd both create a msgbuf to be sent to dongle this code is very similar and for optimisation best put in a function. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: reduce function parameters in sdio send/receive callsArend van Spriel
The SDIO send and receive functions in bcmsdh.c are always called with the same parameters. For the driver there is no use-case to call them otherwise so remove those parameters from function prototypes. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: use consistent function names in bcmsdh.cArend van Spriel
Functions in bcmsdh.c that are called with struct brcmf_sdio_dev instance are renamed consistently with brcmf_sdiod_ prefix. Also removing brcmf_sdioh_attach/detach() functions and merge it with brcmf_sdiod_probe/remove(). Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: remove brcmf_sdio_wdtimer_enable() functionArend van Spriel
Instead of using the brcmf_sdio_wdtimer_enable() function call brcmf_sdbrcm_wd_timer() directly. Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: get rid of some void pointer parametersArend van Spriel
In sdio code a couple of functions use a void pointer as argument type although it should be struct brcmf_sdio. Changing the functions to have proper type checking. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: remove regs parameter from sdio probe functionsArend van Spriel
The chip recognition requires a base address that was provided to it during the probe. However, the address is a fixed define value so it is unnecessary to pass through the probe functions. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: remove brcmf_sdio_regrw_helper() from header fileArend van Spriel
Make brcmf_sdio_regrw_helper() static removing its use outside of the bcmsdh.c source file. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: use sdio functions to enable/disable F2Arend van Spriel
Instead of catching CCCR_IOEx register in F0 write access to determine whether F2 state needs to change do it with direct call to sdio_[enable/disable]_func(). Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: remove unused struct brcmf_sdio_dev::func_cis_ptr attributeArend van Spriel
During the SDIO probe the func_cis_ptr attribute in struct brcmf_sdio_dev is being determined, but it is never used after that. Removing it also obsoletes two functions in bcmsdh.c. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: remove unnecessary function prototypesArend van Spriel
With the merge of bcmsdh.c and bcmsdh_mmc.c several function prototypes are no longer necessary and can be removed. Consequence is reordering some of the functions. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: combine bcmsdh source files into oneArend van Spriel
The driver has four files specific to SDIO host interface handling. This commit reduces that by merging two closely related source files. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18brcmfmac: add missing curly braces in brcmf_fws_txstatus_suppressed()Arend van Spriel
The 0-day testing from Fenguang Wu issued the following warning: tree: git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git master head: 4b074b07625f603d40d4d04937f8874a00415dc4 commit: 1e86d69662d7d86360624f74bbe1b5fa1b8ffb13 [33/59] brcmfmac: Update fwsignal to fix out of order tx. >> drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1393:2-56: code aligned with following code on line 1394 vim +1393 drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c 84bcc0c3 1387 } 84bcc0c3 1388 84bcc0c3 1389 entry->generation = genbit; 84bcc0c3 1390 2747e5f7 1391 ret = brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb); 2747e5f7 1392 if (ret == 0) 1e86d696 @1393 brcmf_skb_htod_tag_set_field(skb, GENERATION, .. 1e86d696 @1394 brcmf_skbcb(skb)->htod_seq = seq; 1e86d696 1395 if (brcmf_skb_htod_seq_get_field(skb, FROMFW)) { 1e86d696 1396 brcmf_skb_htod_seq_set_field(skb, .. 1e86d696 1397 brcmf_skb_htod_seq_set_field(skb, .. This warning is valid and the if statement needs curly braces here. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/Kconfig net/mac80211/util.c
2013-12-02Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-12-02brcmfmac: expose chip information through debugfsArend van Spriel
Adding the debugfs file <debugfs_mnt>/brcmfmac/<devid>/chipinfo which contains the chip number and revision. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: move firmware event related defines to fweh.hArend van Spriel
The dhd.h file contained a number of definitions that are related to events received from the firmware. Those are processed and dispatched in the driver by fweh. Hence the definitions are moved to its include file. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: remove some unused definitionsArend van Spriel
Removing WLC_PHY_TYPE and some BRCMF_E_.* definitions as these are not used in the driver sources. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: Use consistent naming for BCDC.Hante Meuleman
The BCDC protocol layer is using a mix of naming of CDC, BDC and BCDC. Use the name BCDC consistenly over all functions, defines and variables. This patch does not change code functionality. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: move firmware command code definitionsArend van Spriel
Move the command codes to the firmware interface module as that makes a bit more sense. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: move firmware related structures to fwil_types.hArend van Spriel
The firmware control interface is provided by fwil source file, but a number of structures used to communicate with the firmware still resided in dhd.h. The patch moves them to fwil_types.h. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: remove unnecessary EXPORT_SYMBOL() usageArend van Spriel
In bcmsdh.c the functions brcmf_sdio_probe() and brcmf_sdio_remove() were exported, but that is not needed. The functions are linked into the driver module, which is the only one needing to call these. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: provide firmware version in ethtool driver infoArend van Spriel
Knowing the firmware version is pretty useful information when looking at issues. It is retrieved during initialization so store it in driver data structure to fill the ethtool driver info when requested. Reviewed-by: Hante Meuleman <meuleman@brodcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: Dynamically register a protocol layer.Hante Meuleman
BCDC is the default protocol layer and being called directly. This patch installs the functions for this layer dynamically. This allows new protocols to be added and selected dynamically depending on the hw capabilties. As currently only BCDC is supported this is always the installed protocol. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: remove redundant ioctl handlersArend van Spriel
The ioctl() entry points were empty except for handling SIOC_ETHTOOL but that has been obsoleted in favor of struct ethtool_ops. Cleaning up removing the ioctl() handlers. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: use platform specific alignment in SDIOArend van Spriel
The SDIO part of the brcmfmac driver uses a static define BRCMF_SDALIGN to align buffers used for SDIO transfers. This patch replaces it by using alignment derived from the platform specific data. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: determine alignment values during probeArend van Spriel
The alignment values were being determined for each transmit and receive depending on platform data. Instead determine these once during the probe. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: removed dhd_proto.h.Hante Meuleman
dhd_proto.h was cleaned up and prototypes were moved to dhd.h. dhd_proto.h was removed. This is a step in cleaning and restucturing protocol layer. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: rename dhd_cdc to bcdcHante Meuleman
dhd_cdc is renamed to bcdc. This is a step in cleaning and restructuring protocol layer. This is done so new protocols can be added in the future. This step only renames the source files. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> [arend@broadcom.com: use 'git mv' to do the rename] Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: add host tx glomming supportFranky Lin
New WiFi full dongle supports receiving chained packets in one command through the SDIO bus. This patch adds the support on the host side to send chained packets. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: add firmware and nvram file name for bcm4339Franky Lin
Add firmware/nvram file name for bcm4339 so fmac can actually be functional with the chip. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: fix driver build issue when CONFIG_BRCMDBG is not setArend van Spriel
When CONFIG_BRCMDBG is not set we get the following build issue: CC [M] drivers/net/wireless/brcm80211/brcmfmac/fwsignal.o drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c: In function ‘brcmf_fws_hdrpush’: drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:852:18: error: ‘BRCMF_FWS_TYPE_SEQ_LEN’ undeclared The define BRCMF_FWS_TYPE_SEQ_LEN was introduced by: commit 6918f38e4ed4e0493a90a4331e0033bdfc806e00 Author: Hante Meuleman <meuleman@broadcom.com> Date: Wed Oct 23 14:58:51 2013 +0200 brcmfmac: Update fwsignal to fix out of order tx. Unfortunately, it was put in conditional part of the source file under #ifdef DEBUG. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: determine sd host controller related variable earlierArend van Spriel
The commit "eb9c174 brcmfmac: determine host controller related variables during probe" was not implemented correctly as the information is already needed in brcmf_sdbrcm_probe(). This patch moves it to brcmf_sdioh_attach() instead. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 09:07:59 +0000