summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)Author
2025-07-10wifi: ath6kl: remove WARN on bad firmware inputJohannes Berg
[ Upstream commit e7417421d89358da071fd2930f91e67c7128fbff ] If the firmware gives bad input, that's nothing to do with the driver's stack at this point etc., so the WARN_ON() doesn't add any value. Additionally, this is one of the top syzbot reports now. Just print a message, and as an added bonus, print the sizes too. Reported-by: syzbot+92c6dd14aaa230be6855@syzkaller.appspotmail.com Tested-by: syzbot+92c6dd14aaa230be6855@syzkaller.appspotmail.com Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Link: https://patch.msgid.link/20250617114529.031a677a348e.I58bf1eb4ac16a82c546725ff010f3f0d2b0cca49@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-10wifi: ath12k: fix wrong handling of CCMP256 and GCMP ciphersRameshkumar Sundaram
[ Upstream commit f5d6b15d9503263d9425dcde9cc2fd401a32b0f2 ] Currently for CCMP256, GCMP128 and GCMP256 ciphers, in ath12k_install_key() IEEE80211_KEY_FLAG_GENERATE_IV_MGMT is not set and in ath12k_mac_mgmt_tx_wmi() a length of IEEE80211_CCMP_MIC_LEN is reserved for all ciphers. This results in unexpected drop of protected management frames in case either of above 3 ciphers is used. The reason is, without IEEE80211_KEY_FLAG_GENERATE_IV_MGMT set, mac80211 will not generate CCMP/GCMP headers in TX frame for ath12k. Also MIC length reserved is wrong and such frames are dropped by hardware. Fix this by setting IEEE80211_KEY_FLAG_GENERATE_IV_MGMT flag for above ciphers and by reserving proper MIC length for those ciphers. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250415195812.2633923-2-rameshkumar.sundaram@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-10wifi: ath12k: Handle error cases during extended skb allocationP Praneesh
[ Upstream commit 37a068fc9dc4feb8d76e8896bb33883d06c11a6b ] Currently, in the case of extended skb allocation, the buffer is freed before the DMA unmap operation. This premature deletion can result in skb->data corruption, as the memory region could be re-allocated for other purposes. Fix this issue by reordering the failure cases by calling dma_unmap_single() first, then followed by the corresponding kfree_skb(). This helps avoid data corruption in case of failures in dp_tx(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250411060154.1388159-2-praneesh.p@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-10wifi: ath12k: fix skb_ext_desc leak in ath12k_dp_tx() error pathNicolas Escande
[ Upstream commit 28a9972e0f0693cd4d08f431c992fa6be39c788c ] When vlan support was added, we missed that when ath12k_dp_prepare_htt_metadata() returns an error we also need to free the skb holding the metadata before going on with the cleanup process. Compile tested only. Fixes: 26dd8ccdba4d ("wifi: ath12k: dynamic VLAN support") Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250122160112.3234558-1-nico.escande@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Stable-dep-of: 37a068fc9dc4 ("wifi: ath12k: Handle error cases during extended skb allocation") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: carl9170: do not ping device which has failed to load firmwareDmitry Antipov
[ Upstream commit 15d25307692312cec4b57052da73387f91a2e870 ] Syzkaller reports [1, 2] crashes caused by an attempts to ping the device which has failed to load firmware. Since such a device doesn't pass 'ieee80211_register_hw()', an internal workqueue managed by 'ieee80211_queue_work()' is not yet created and an attempt to queue work on it causes null-ptr-deref. [1] https://syzkaller.appspot.com/bug?extid=9a4aec827829942045ff [2] https://syzkaller.appspot.com/bug?extid=0d8afba53e8fb2633217 Fixes: e4a668c59080 ("carl9170: fix spurious restart due to high latency") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Christian Lamparter <chunkeey@gmail.com> Link: https://patch.msgid.link/20250616181205.38883-1-dmantipov@yandex.ru Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath12k: Clear affinity hint before calling ath12k_pci_free_irq() in ↵Manivannan Sadhasivam
error path commit b43b1e2c52db77c872bd60d30cdcc72c47df70c7 upstream. If a shared IRQ is used by the driver due to platform limitation, then the IRQ affinity hint is set right after the allocation of IRQ vectors in ath12k_pci_msi_alloc(). This does no harm unless one of the functions requesting the IRQ fails and attempt to free the IRQ. This may end up with a warning from the IRQ core that is expecting the affinity hint to be cleared before freeing the IRQ: kernel/irq/manage.c: /* make sure affinity_hint is cleaned up */ if (WARN_ON_ONCE(desc->affinity_hint)) desc->affinity_hint = NULL; So to fix this issue, clear the IRQ affinity hint before calling ath12k_pci_free_irq() in the error path. The affinity will be cleared once again further down the error path due to code organization, but that does no harm. Fixes: a3012f206d07 ("wifi: ath12k: set IRQ affinity to CPU0 in case of one MSI vector") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20250225053447.16824-3-manivannan.sadhasivam@linaro.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Wenshan Lan <jetlan9@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27wifi: ath12k: Pass correct values of center freq1 and center freq2 for 160 MHzSuraj P Kizhakkethil
[ Upstream commit b1b01e46a3db5ad44d1e4691ba37c1e0832cd5cf ] Currently, for 160 MHz bandwidth, center frequency1 and center frequency2 are not passed correctly to the firmware. Set center frequency1 as the center frequency of the primary 80 MHz channel segment and center frequency2 as the center frequency of the 160 MHz channel and pass the values to the firmware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Suraj P Kizhakkethil <quic_surapk@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250304095315.3050325-2-quic_surapk@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath12k: fix incorrect CE addressesBalamurugan S
[ Upstream commit 60031d9c3589c7983fd1deb4a4c0bebf0929890e ] In the current ath12k implementation, the CE addresses CE_HOST_IE_ADDRESS and CE_HOST_IE_2_ADDRESS are incorrect. These values were inherited from ath11k, but ath12k does not currently use them. However, the Ath12k AHB support relies on these addresses. Therefore, correct the CE addresses for ath12k. Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Signed-off-by: Balamurugan S <quic_bselvara@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Link: https://patch.msgid.link/20250321-ath12k-ahb-v12-2-bb389ed76ae5@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath12k: fix link valid field initialization in the monitor RxHari Chandrakanthan
[ Upstream commit 2826139f9295821fe2b049318a1cc057ec003131 ] Currently, the link_valid field is not initialized in the monitor Rx path. This can result in random values for the link_valid and link_id leads to undefined behaviour in mac80211. Therefore, initialize the link_valid field in the monitor Rx path. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250324062518.2752822-2-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath11k: determine PM policy based on machine modelBaochen Qiang
[ Upstream commit ce8669a27016354dfa8bf3c954255cb9f3583bae ] To handle the Lenovo unexpected wakeup issue [1], previously we revert commit 166a490f59ac ("wifi: ath11k: support hibernation"). So currently WLAN target is put into WoWLAN mode during suspend. This is a temporary solution as it does not work on machines where WLAN power is cut off. The thought here is that we do WoWLAN suspend on Lenovo machines while do non-WoWLAN suspend (which is done in the reverted commit) on other machines. This requires us to identify Lenovo machines from others. For that purpose, read board vendor and product name from DMI interface, match it against all known affected machines. If there is a match, choose WoWLAN suspend mode, else choose non-WoWLAN mode. Save the mode in ab for later reference. [1] https://bugzilla.kernel.org/show_bug.cgi?id=219196 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20250328-ath11k-bring-hibernation-back-v3-1-23405ae23431@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath12k: fix failed to set mhi state error during reboot with hardware ↵Aditya Kumar Singh
grouping [ Upstream commit dce7aec6b1f74b0a46b901ab8de1f7bd0515f733 ] With hardware grouping, during reboot, whenever a device is removed, it powers down itself and all its partner devices in the same group. Now this is done by all devices and hence there is multiple power down for devices and hence the following error messages can be seen: ath12k_pci 0002:01:00.0: failed to set mhi state POWER_OFF(3) in current mhi state (0x0) ath12k_pci 0002:01:00.0: failed to set mhi state: POWER_OFF(3) ath12k_pci 0002:01:00.0: failed to set mhi state DEINIT(1) in current mhi state (0x0) ath12k_pci 0002:01:00.0: failed to set mhi state: DEINIT(1) ath12k_pci 0003:01:00.0: failed to set mhi state POWER_OFF(3) in current mhi state (0x0) ath12k_pci 0003:01:00.0: failed to set mhi state: POWER_OFF(3) ath12k_pci 0003:01:00.0: failed to set mhi state DEINIT(1) in current mhi state (0x0) ath12k_pci 0003:01:00.0: failed to set mhi state: DEINIT(1) ath12k_pci 0004:01:00.0: failed to set mhi state POWER_OFF(3) in current mhi state (0x0) ath12k_pci 0004:01:00.0: failed to set mhi state: POWER_OFF(3) To prevent this, check if the ATH12K_PCI_FLAG_INIT_DONE flag is already set before powering down. If it is set, it indicates that another partner device has already performed the power down, and this device can skip this step. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-3-95e7bf048595@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath12k: using msdu end descriptor to check for rx multicast packetsSarika Sharma
[ Upstream commit cb7433cc5cd4d07175dbc41f5a19966e9fae48be ] Currently, the RX multicast broadcast packet check is performed using bit 15 from the info6 field of the MPDU start descriptor. This check can also be done using bit 9 from the info5 field of the MSDU end descriptor. However, in some scenarios multicast bit is not set when fetched from MPDU start descriptor. Therefore, checking the RX multicast broadcast packet from the MSDU end descriptor is more reliable as it is per MSDU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250411061523.859387-2-quic_sarishar@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath11k: Fix QMI memory reuse logicMuhammad Usama Anjum
[ Upstream commit cd2e7bae92bd7e65063ab8d04721d2b711ba4cbe ] Firmware requests 2 segments at first. The first segment is of 6799360 whose allocation fails due to dma remapping not available. The success is returned to firmware. Then firmware asks for 22 smaller segments instead of 2 big ones. Those get allocated successfully. At suspend/ hibernation time, these segments aren't freed as they will be reused by firmware after resuming. After resuming, the firmware asks for the 2 segments again with the first segment of 6799360 size. Since chunk->vaddr is not NULL, the type and size are compared with the previous type and size to know if it can be reused or not. Unfortunately, it is detected that it cannot be reused and this first smaller segment is freed. Then we continue to allocate 6799360 size memory which fails and ath11k_qmi_free_target_mem_chunk() is called which frees the second smaller segment as well. Later success is returned to firmware which asks for 22 smaller segments again. But as we had freed 2 segments already, we'll allocate the first 2 new smaller segments again and reuse the remaining 20. Hence 20 small segments are being reused instead of 22. Add skip logic when vaddr is set, but size/type don't match. Use the same skip and success logic as used when dma_alloc_coherent() fails. By skipping, the possibility of resume failure due to kernel failing to allocate memory for QMI can be avoided. kernel: ath11k_pci 0000:03:00.0: failed to allocate dma memory for qmi (524288 B type 1) ath11k_pci 0000:03:00.0: failed to allocate qmi target memory: -22 Tested-on: WCN6855 WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.6 Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20250428080242.466901-1-usama.anjum@collabora.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath12k: fix a possible dead lock caused by ab->base_lockBaochen Qiang
[ Upstream commit ef115c265a21e3c11deee7f73bd1061775a7bf20 ] spin_lock/spin_unlock are used in ath12k_reg_chan_list_event to acquire/release ab->base_lock. For now this is safe because that function is only called in soft IRQ context. But ath12k_reg_chan_list_event() will be called from process context in an upcoming patch, and this can result in a deadlock if ab->base_lock is acquired in process context and then soft IRQ occurs on the same CPU and tries to acquire that lock. Fix it by using spin_lock_bh and spin_unlock_bh instead. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-1-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath12k: fix macro definition HAL_RX_MSDU_PKT_LENGTH_GETKang Yang
[ Upstream commit a69bbf89d751ba2d6da21d773c4e29c91c5e53c4 ] Currently, HAL_RX_MSDU_PKT_LENGTH_GET uses u32_get_bits to obtain the MSDU length from the MSDU description. This is not right. Because all halphy descriptions are little endian. So use le32_get_bits for HAL_RX_MSDU_PKT_LENGTH_GET. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-9-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath12k: fix ring-buffer corruptionJohan Hovold
commit 6b67d2cf14ea997061f61e9c8afd4e1c0f22acb9 upstream. Users of the Lenovo ThinkPad X13s have reported that Wi-Fi sometimes breaks and the log fills up with errors like: ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1484, expected 1492 ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1460, expected 1484 which based on a quick look at the ath11k driver seemed to indicate some kind of ring-buffer corruption. Miaoqing Pan tracked it down to the host seeing the updated destination ring head pointer before the updated descriptor, and the error handling for that in turn leaves the ring buffer in an inconsistent state. While this has not yet been observed with ath12k, the ring-buffer implementation is very similar to the ath11k one and it suffers from the same bugs. Add the missing memory barrier to make sure that the descriptor is read after the head pointer to address the root cause of the corruption while fixing up the error handling in case there are ever any (ordering) bugs on the device side. Note that the READ_ONCE() are only needed to avoid compiler mischief in case the ring-buffer helpers are ever inlined. Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable@vger.kernel.org # 6.3 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218623 Link: https://lore.kernel.org/20250310010217.3845141-3-quic_miaoqing@quicinc.com Cc: Miaoqing Pan <quic_miaoqing@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Miaoqing Pan <quic_miaoqing@quicinc.com> Link: https://patch.msgid.link/20250321095219.19369-1-johan+linaro@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27wifi: ath11k: fix ring-buffer corruptionJohan Hovold
commit 6d037a372f817e9fcb56482f37917545596bd776 upstream. Users of the Lenovo ThinkPad X13s have reported that Wi-Fi sometimes breaks and the log fills up with errors like: ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1484, expected 1492 ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1460, expected 1484 which based on a quick look at the driver seemed to indicate some kind of ring-buffer corruption. Miaoqing Pan tracked it down to the host seeing the updated destination ring head pointer before the updated descriptor, and the error handling for that in turn leaves the ring buffer in an inconsistent state. Add the missing memory barrier to make sure that the descriptor is read after the head pointer to address the root cause of the corruption while fixing up the error handling in case there are ever any (ordering) bugs on the device side. Note that the READ_ONCE() are only needed to avoid compiler mischief in case the ring-buffer helpers are ever inlined. Tested-on: WCN6855 hw2.1 WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218623 Link: https://lore.kernel.org/20250310010217.3845141-3-quic_miaoqing@quicinc.com Cc: Miaoqing Pan <quic_miaoqing@quicinc.com> Cc: stable@vger.kernel.org # 5.6 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Miaoqing Pan <quic_miaoqing@quicinc.com> Tested-by: Steev Klimaszewski <steev@kali.org> Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Tested-by: Clayton Craft <clayton@craftyguy.net> Link: https://patch.msgid.link/20250321094916.19098-1-johan+linaro@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27wifi: ath11k: fix rx completion meta data corruptionJohan Hovold
commit ab52e3e44fe9b666281752e2481d11e25b0e3fdd upstream. Add the missing memory barrier to make sure that the REO dest ring descriptor is read after the head pointer to avoid using stale data on weakly ordered architectures like aarch64. This may fix the ring-buffer corruption worked around by commit f9fff67d2d7c ("wifi: ath11k: Fix SKB corruption in REO destination ring") by silently discarding data, and may possibly also address user reported errors like: ath11k_pci 0006:01:00.0: msdu_done bit in attention is not set Tested-on: WCN6855 hw2.1 WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Cc: stable@vger.kernel.org # 5.6 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218005 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Clayton Craft <clayton@craftyguy.net> Link: https://patch.msgid.link/20250321145302.4775-1-johan+linaro@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850Baochen Qiang
[ Upstream commit 7588a893cde5385ad308400ff167d29a29913b3a ] GCC_GCC_PCIE_HOT_RST is wrongly defined for WCN7850, causing kernel crash on some specific platforms. Since this register is divergent for WCN7850 and QCN9274, move it to register table to allow different definitions. Then correct the register address for WCN7850 to fix this issue. Note IPQ5332 is not affected as it is not PCIe based device. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reported-by: Parth Pancholi <parth.pancholi@toradex.com> Closes: https://lore.kernel.org/all/86899b2235a59c9134603beebe08f2bb0b244ea0.camel@gmail.com Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Tested-by: Parth Pancholi <parth.pancholi@toradex.com> Link: https://patch.msgid.link/20250523-ath12k-wrong-global-reset-addr-v1-1-3b06eb556196@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: refactor ath12k_hw_regs structureP Praneesh
[ Upstream commit 5257324583e32fd5bd6bbb6c82b4f5880b842f99 ] IPQ5332 device have different register address values for the below registers: HAL_TCL1_RING_BASE_LSB HAL_TCL1_RING_BASE_MSB HAL_TCL2_RING_BASE_LSB HAL_SEQ_WCSS_UMAC_CE0_SRC_REG HAL_SEQ_WCSS_UMAC_CE0_DST_REG HAL_SEQ_WCSS_UMAC_CE1_SRC_REG HAL_SEQ_WCSS_UMAC_CE1_DST_REG Hence, refactor ath12k_hw_regs structure to accommodate these changes in IPQ5332. Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Balamurugan S <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan S <quic_bselvara@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Link: https://patch.msgid.link/20250321-ath12k-ahb-v12-3-bb389ed76ae5@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Stable-dep-of: 7588a893cde5 ("wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath11k: validate ath11k_crypto_mode on top of ↵Rodrigo Gobbi
ath11k_core_qmi_firmware_ready [ Upstream commit b0d226a60856a1b765bb9a3848c7b2322fd08c47 ] if ath11k_crypto_mode is invalid (not ATH11K_CRYPT_MODE_SW/ATH11K_CRYPT_MODE_HW), ath11k_core_qmi_firmware_ready() will not undo some actions that was previously started/configured. Do the validation as soon as possible in order to avoid undoing actions in that case and also to fix the following smatch warning: drivers/net/wireless/ath/ath11k/core.c:2166 ath11k_core_qmi_firmware_ready() warn: missing unwind goto? Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202304151955.oqAetVFd-lkp@intel.com/ Fixes: aa2092a9bab3 ("ath11k: add raw mode and software crypto support") Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20250522200519.16858-1-rodrigo.gobbi.7@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath11k: move some firmware stats related functions outside of debugfsBaochen Qiang
[ Upstream commit 72610ed7d79da17ee09102534d6c696a4ea8a08e ] Commit b488c766442f ("ath11k: report rssi of each chain to mac80211 for QCA6390/WCN6855") and commit c3b39553fc77 ("ath11k: add signal report to mac80211 for QCA6390 and WCN6855") call debugfs functions in mac ops. Those functions are no-ops if CONFIG_ATH11K_DEBUGFS is not enabled, thus cause wrong status reported. Move them to mac.c. Besides, since WMI_REQUEST_RSSI_PER_CHAIN_STAT and WMI_REQUEST_VDEV_STAT stats could also be requested via mac ops, process them directly in ath11k_update_stats_event(). Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Fixes: b488c766442f ("ath11k: report rssi of each chain to mac80211 for QCA6390/WCN6855") Fixes: c3b39553fc77 ("ath11k: add signal report to mac80211 for QCA6390 and WCN6855") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250220082448.31039-5-quic_bqiang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath11k: don't wait when there is no vdev startedBaochen Qiang
[ Upstream commit 3b6d00fa883075dcaf49221538230e038a9c0b43 ] For WMI_REQUEST_VDEV_STAT request, firmware might split response into multiple events dut to buffer limit, hence currently in ath11k_debugfs_fw_stats_process() we wait until all events received. In case there is no vdev started, this results in that below condition would never get satisfied ((++ar->fw_stats.num_vdev_recvd) == total_vdevs_started) finally the requestor would be blocked until wait time out. The same applies to WMI_REQUEST_BCN_STAT request as well due to: ((++ar->fw_stats.num_bcn_recvd) == ar->num_started_vdevs) Change to check the number of started vdev first: if it is zero, finish wait directly; if not, follow the old way. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250220082448.31039-4-quic_bqiang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath11k: don't use static variables in ath11k_debugfs_fw_stats_process()Baochen Qiang
[ Upstream commit 2bcf73b2612dda7432f2c2eaad6679bd291791f2 ] Currently ath11k_debugfs_fw_stats_process() is using static variables to count firmware stat events. Taking num_vdev as an example, if for whatever reason ( say ar->num_started_vdevs is 0 or firmware bug etc.) the following condition (++num_vdev) == total_vdevs_started is not met, is_end is not set thus num_vdev won't be cleared. Next time when firmware stats is requested again, even if everything is working fine, we will fail due to the condition above will never be satisfied. The same applies to num_bcn as well. Change to use non-static counters so that we have a chance to clear them each time firmware stats is requested. Currently only ath11k_fw_stats_request() and ath11k_debugfs_fw_stats_request() are requesting firmware stats, so clear counters there. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Fixes: da3a9d3c1576 ("ath11k: refactor debugfs code into debugfs.c") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250220082448.31039-3-quic_bqiang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()Baochen Qiang
[ Upstream commit 9f6e82d11bb9692a90d20b10f87345598945c803 ] We get report [1] that CPU is running a hot loop in ath11k_debugfs_fw_stats_request(): 94.60% 0.00% i3status [kernel.kallsyms] [k] do_syscall_64 | --94.60%--do_syscall_64 | --94.55%--__sys_sendmsg ___sys_sendmsg ____sys_sendmsg netlink_sendmsg netlink_unicast genl_rcv netlink_rcv_skb genl_rcv_msg | --94.55%--genl_family_rcv_msg_dumpit __netlink_dump_start netlink_dump genl_dumpit nl80211_dump_station | --94.55%--ieee80211_dump_station sta_set_sinfo | --94.55%--ath11k_mac_op_sta_statistics ath11k_debugfs_get_fw_stats | --94.55%--ath11k_debugfs_fw_stats_request | |--41.73%--_raw_spin_lock_bh | |--22.74%--__local_bh_enable_ip | |--9.22%--_raw_spin_unlock_bh | --6.66%--srso_alias_safe_ret This is because, if for whatever reason ar->fw_stats_done is not set by ath11k_update_stats_event(), ath11k_debugfs_fw_stats_request() won't yield CPU before an up to 3s timeout. Change to completion mechanism to avoid CPU burning. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Reported-by: Yury Vostrikov <mon@unformed.ru> Closes: https://lore.kernel.org/all/7324ac7a-8b7a-42a5-aa19-de52138ff638@app.fastmail.com/ # [1] Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250220082448.31039-2-quic_bqiang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath11k: convert timeouts to secs_to_jiffies()Easwar Hariharan
[ Upstream commit b29425972c5234a59b6fb634125420ed74266377 ] Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced secs_to_jiffies(). As the value here is a multiple of 1000, use secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication. This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with the following Coccinelle rules: @@ constant C; @@ - msecs_to_jiffies(C * 1000) + secs_to_jiffies(C) @@ constant C; @@ - msecs_to_jiffies(C * MSEC_PER_SEC) + secs_to_jiffies(C) Link: https://lkml.kernel.org/r/20241210-converge-secs-to-jiffies-v3-14-ddfefd7e9f2a@linux.microsoft.com Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andrew Lunn <andrew+netdev@lunn.ch> Cc: Anna-Maria Behnsen <anna-maria@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Daniel Mack <daniel@zonque.org> Cc: David Airlie <airlied@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Fainelli <florian.fainelli@broadcom.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: James Smart <james.smart@broadcom.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Jeff Johnson <jjohnson@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jeroen de Borst <jeroendb@google.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Jozsef Kadlecsik <kadlec@netfilter.org> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kalle Valo <kvalo@kernel.org> Cc: Louis Peens <louis.peens@corigine.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Naveen N Rao <naveen@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Nicolas Palix <nicolas.palix@imag.fr> Cc: Oded Gabbay <ogabbay@kernel.org> Cc: Ofir Bitton <obitton@habana.ai> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Praveen Kaligineedi <pkaligineedi@google.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Scott Branden <sbranden@broadcom.com> Cc: Shailend Chand <shailend@google.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: Simon Horman <horms@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Takashi Iwai <tiwai@suse.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Xiubo Li <xiubli@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Stable-dep-of: 9f6e82d11bb9 ("wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19ath10k: snoc: fix unbalanced IRQ enable in crash recoveryCaleb Connolly
[ Upstream commit 1650d32b92b01db03a1a95d69ee74fcbc34d4b00 ] In ath10k_snoc_hif_stop() we skip disabling the IRQs in the crash recovery flow, but we still unconditionally call enable again in ath10k_snoc_hif_start(). We can't check the ATH10K_FLAG_CRASH_FLUSH bit since it is cleared before hif_start() is called, so instead check the ATH10K_SNOC_FLAG_RECOVERY flag and skip enabling the IRQs during crash recovery. This fixes unbalanced IRQ enable splats that happen after recovering from a crash. Fixes: 0e622f67e041 ("ath10k: add support for WCN3990 firmware crash recovery") Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Link: https://patch.msgid.link/20250318205043.1043148-1-caleb.connolly@linaro.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath9k_htc: Abort software beacon handling if disabledToke Høiland-Jørgensen
[ Upstream commit ac4e317a95a1092b5da5b9918b7118759342641c ] A malicious USB device can send a WMI_SWBA_EVENTID event from an ath9k_htc-managed device before beaconing has been enabled. This causes a device-by-zero error in the driver, leading to either a crash or an out of bounds read. Prevent this by aborting the handling in ath9k_htc_swba() if beacons are not enabled. Reported-by: Robert Morris <rtm@csail.mit.edu> Closes: https://lore.kernel.org/r/88967.1743099372@localhost Fixes: 832f6a18fc2a ("ath9k_htc: Add beacon slots") Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20250402112217.58533-1-toke@toke.dk Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: fix memory leak in ath12k_service_ready_ext_eventRajat Soni
[ Upstream commit 89142d34d5602c7447827beb181fa06eb08b9d5c ] Currently, in ath12k_service_ready_ext_event(), svc_rdy_ext.mac_phy_caps is not freed in the failure case, causing a memory leak. The following trace is observed in kmemleak: unreferenced object 0xffff8b3eb5789c00 (size 1024): comm "softirq", pid 0, jiffies 4294942577 hex dump (first 32 bytes): 00 00 00 00 01 00 00 00 00 00 00 00 7b 00 00 10 ............{... 01 00 00 00 00 00 00 00 01 00 00 00 1f 38 00 00 .............8.. backtrace (crc 44e1c357): __kmalloc_noprof+0x30b/0x410 ath12k_wmi_mac_phy_caps_parse+0x84/0x100 [ath12k] ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k] ath12k_wmi_svc_rdy_ext_parse+0x308/0x4c0 [ath12k] ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k] ath12k_service_ready_ext_event.isra.0+0x44/0xd0 [ath12k] ath12k_wmi_op_rx+0x2eb/0xd70 [ath12k] ath12k_htc_rx_completion_handler+0x1f4/0x330 [ath12k] ath12k_ce_recv_process_cb+0x218/0x300 [ath12k] ath12k_pci_ce_workqueue+0x1b/0x30 [ath12k] process_one_work+0x219/0x680 bh_worker+0x198/0x1f0 tasklet_action+0x13/0x30 handle_softirqs+0xca/0x460 __irq_exit_rcu+0xbe/0x110 irq_exit_rcu+0x9/0x30 Free svc_rdy_ext.mac_phy_caps in the error case to fix this memory leak. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Rajat Soni <quic_rajson@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Link: https://patch.msgid.link/20250430-wmi-mem-leak-v1-1-fcc9b49c2ddc@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: fix node corruption in ar->arvifs listMaharaja Kennadyrajan
[ Upstream commit 823435bd23108d6f8be89ea2d025c0e2e3769c51 ] In current WLAN recovery code flow, ath12k_core_halt() only reinitializes the "arvifs" list head. This will cause the list node immediately following the list head to become an invalid list node. Because the prev of that node still points to the list head "arvifs", but the next of the list head "arvifs" no longer points to that list node. When a WLAN recovery occurs during the execution of a vif removal, and it happens before the spin_lock_bh(&ar->data_lock) in ath12k_mac_vdev_delete(), list_del() will detect the previously mentioned situation, thereby triggering a kernel panic. The fix is to remove and reinitialize all vif list nodes from the list head "arvifs" during WLAN halt. The reinitialization is to make the list nodes valid, ensuring that the list_del() in ath12k_mac_vdev_delete() can execute normally. Call trace: __list_del_entry_valid_or_report+0xd4/0x100 (P) ath12k_mac_remove_link_interface.isra.0+0xf8/0x2e4 [ath12k] ath12k_scan_vdev_clean_work+0x40/0x164 [ath12k] cfg80211_wiphy_work+0xfc/0x100 process_one_work+0x164/0x2d0 worker_thread+0x254/0x380 kthread+0xfc/0x100 ret_from_fork+0x10/0x20 The change is mostly copied from the ath11k patch: https://lore.kernel.org/all/20250320053145.3445187-1-quic_stonez@quicinc.com/ Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250416021724.2162519-1-maharaja.kennadyrajan@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: Fix the QoS control field offset to build QoS headerRamasamy Kaliappan
[ Upstream commit 8599d4cc4191c8c1af34207a8b9414acca4afb59 ] Currently, in the mac80211 layer, received EAPOL packets are dropped when the HT control field is present in the QoS header. This issue arises due to an incorrect QoS control field offset used to build the QoS header in the MSDU data, leading to a corrupted header in the mac80211 layer. This issue also applies to other frames that contain the QoS control field, such as QoS data or Null frames. To resolve this, use ieee80211_get_qos_ctl() to obtain the correct QoS control offset from the MSDU data. Additionally, ensure the QoS control header is copied in little-endian format within the MSDU data. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com> Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250415184102.2707300-1-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: Add MSDU length validation for TKIP MIC errorP Praneesh
[ Upstream commit 763216fe6c5df95d122c71ef34c342427c987820 ] In the WBM error path, while processing TKIP MIC errors, MSDU length is fetched from the hal_rx_desc's msdu_end. This MSDU length is directly passed to skb_put() without validation. In stress test scenarios, the WBM error ring may receive invalid descriptors, which could lead to an invalid MSDU length. To fix this, add a check to drop the skb when the calculated MSDU length is greater than the skb size. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250416021903.3178962-1-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: fix invalid access to memorySarika Sharma
[ Upstream commit 9f17747fbda6fca934854463873c4abf8061491d ] In ath12k_dp_rx_msdu_coalesce(), rxcb is fetched from skb and boolean is_continuation is part of rxcb. Currently, after freeing the skb, the rxcb->is_continuation accessed again which is wrong since the memory is already freed. This might lead use-after-free error. Hence, fix by locally defining bool is_continuation from rxcb, so that after freeing skb, is_continuation can be used. Compile tested only. Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250408045327.1632222-1-quic_sarishar@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: Fix buffer overflow in debugfsDan Carpenter
[ Upstream commit 8c7a5031a6b0d42e640fbd2d5d05f61f74e32dce ] If the user tries to write more than 32 bytes then it results in memory corruption. Fortunately, this is debugfs so it's limited to root users. Fixes: 3f73c24f28b3 ("wifi: ath12k: Add support to enable debugfs_htt_stats") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/35daefbd-d493-41d9-b192-96177d521b40@stanley.mountain Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: Fix WMI tag for EHT rate in peer assocRamya Gnanasekar
[ Upstream commit 1a0e65750b55d2cf5de4a9bf7d6d55718784bdb7 ] Incorrect WMI tag is used for EHT rate update from host to firmware while encoding peer assoc WMI. Correct the WMI tag used for EHT rate update from WMI_TAG_HE_RATE_SET to the proper tag. This ensures firmware does not mistakenly update HE rate during parsing. Found during code review. Compile tested only. Fixes: 5b70ec6036c1 ("wifi: ath12k: add WMI support for EHT peer") Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com> Link: https://patch.msgid.link/20250409152341.944628-1-ramya.gnanasekar@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: fix cleanup path after mhi initRaj Kumar Bhagat
[ Upstream commit 6177c97fb6f05bf0473a2806e3bece7e77693209 ] Currently, the 'err_pci_msi_free' label is misplaced, causing the cleanup sequence to be incorrect. Fix this by moving the 'err_pci_msi_free' label to the correct position after 'err_irq_affinity_cleanup'. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1 Fixes: a3012f206d07 ("wifi: ath12k: set IRQ affinity to CPU0 in case of one MSI vector") Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250403-ath12k-cleanup-v1-1-ad8f67b0e9cf@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: Fix invalid memory access while forming 802.11 headerP Praneesh
[ Upstream commit be908d2360341f8bbc982fff5a5e4f8030c17f74 ] While forming the 802.11 header from the rx descriptor, skb_push() is performed for the 802.11 header length and then calls ath12k_dp_rx_desc_get_dot11_hdr(). Since skb_push() moves the skb->data pointer backwards by the 802.11 header length, the rx descriptor points to a different memory area than intended, causing invalid information to be fetched from the rx descriptor. Also, when IV and ICV are not stripped from the given MSDU, mac80211 performs PN validation for these MSDUs, which requires the crypto header. Before forming the crypto header from the given rx descriptor, skb_push() is performed for the crypto header length, which overwrites the memory pointed to by the rx descriptor, causing invalid information to form the 802.11 header. Fix these issues by moving all rx descriptor accesses before the skb_push() operation which ensures the proper 802.11 headers are generated from the given rx descriptor and removing ath12k_dp_rxdesc_get_mpdu_frame_ctrl() for filling frame control, as this information is already fetched by ath12k_dp_rx_desc_get_dot11_hdr(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Co-developed-by: Karthikeyan Periyasamy <karthikeyan.periyasamy@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <karthikeyan.periyasamy@oss.qualcomm.com> Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com> Link: https://patch.msgid.link/20250402180543.2670947-1-praneesh.p@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: Fix memory leak during vdev_id mismatchP Praneesh
[ Upstream commit 75ec94db880b1e4b4f9182885d60db0db6e2ee56 ] Currently driver enables vdev_id check as part of the bank configuration in ath12k_dp_tx_get_vdev_bank_config(). This check ensures that the vdev_id configured in the bank register aligns with the vdev_id in the packet's address search table within the firmware. If there is a mismatch, the firmware forwards the packet with the HTT status HAL_WBM_REL_HTT_TX_COMP_STATUS_VDEVID_MISMATCH. Since driver does not handle this vdev_id mismatch HTT status, the corresponding buffers are not freed properly, causing a memory leak. Fix this issue by adding handling to free the buffers when a vdev_id mismatch HTT status is encountered. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ- Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com> Link: https://patch.msgid.link/20250402174032.2651221-1-praneesh.p@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath11k: fix node corruption in ar->arvifs listStone Zhang
[ Upstream commit 31e98e277ae47f56632e4d663b1d4fd12ba33ea8 ] In current WLAN recovery code flow, ath11k_core_halt() only reinitializes the "arvifs" list head. This will cause the list node immediately following the list head to become an invalid list node. Because the prev of that node still points to the list head "arvifs", but the next of the list head "arvifs" no longer points to that list node. When a WLAN recovery occurs during the execution of a vif removal, and it happens before the spin_lock_bh(&ar->data_lock) in ath11k_mac_op_remove_interface(), list_del() will detect the previously mentioned situation, thereby triggering a kernel panic. The fix is to remove and reinitialize all vif list nodes from the list head "arvifs" during WLAN halt. The reinitialization is to make the list nodes valid, ensuring that the list_del() in ath11k_mac_op_remove_interface() can execute normally. Call trace: __list_del_entry_valid_or_report+0xb8/0xd0 ath11k_mac_op_remove_interface+0xb0/0x27c [ath11k] drv_remove_interface+0x48/0x194 [mac80211] ieee80211_do_stop+0x6e0/0x844 [mac80211] ieee80211_stop+0x44/0x17c [mac80211] __dev_close_many+0xac/0x150 __dev_change_flags+0x194/0x234 dev_change_flags+0x24/0x6c devinet_ioctl+0x3a0/0x670 inet_ioctl+0x200/0x248 sock_do_ioctl+0x60/0x118 sock_ioctl+0x274/0x35c __arm64_sys_ioctl+0xac/0xf0 invoke_syscall+0x48/0x114 ... Tested-on: QCA6698AQ hw2.1 PCI WLAN.HSP.1.1-04591-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Stone Zhang <quic_stonez@quicinc.com> Link: https://patch.msgid.link/20250320053145.3445187-1-quic_stonez@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29wifi: ath11k: Use dma_alloc_noncoherent for rx_tid buffer allocationP Praneesh
[ Upstream commit eeadc6baf8b3dcd32787cc84f0473dc2a2850370 ] Currently, the driver allocates cacheable DMA buffers for the rx_tid structure using kzalloc() and dma_map_single(). These buffers are long-lived and can persist for the lifetime of the peer, which is not advisable. Instead of using kzalloc() and dma_map_single() for allocating cacheable DMA buffers, utilize the dma_alloc_noncoherent() helper for the allocation of long-lived cacheable DMA buffers, such as the peer's rx_tid. Since dma_alloc_noncoherent() returns unaligned physical and virtual addresses, align them internally before use within the driver. This ensures proper allocation of non-coherent memory through the kernel helper. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Link: https://patch.msgid.link/20250119164219.647059-3-quic_ppranees@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29wifi: ath12k: Fix end offset bit definition in monitor ring descriptorP Praneesh
[ Upstream commit 6788a666000d600bd8f2e9f991cad9cc805e7f01 ] End offset for the monitor destination ring descriptor is defined as 16 bits, while the firmware definition specifies only 12 bits. The remaining bits (bit 12 to bit 15) are reserved and may contain junk values, leading to invalid information retrieval. Fix this issue by updating the correct genmask values. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Link: https://patch.msgid.link/20241223060132.3506372-8-quic_ppranees@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29wifi: ath12k: Fetch regdb.bin file from board-2.binAaradhana Sahu
[ Upstream commit 24f587572acf7509127dbdfcbf1b681ef84eeba0 ] Currently, ath12k_core_fetch_regdb() finds regdb.bin file through board id's but in board-2.bin file regdb.bin file is present with default board id because of which regdb.bin is not fetched. Add support to fetch regdb.bin file from board-2.bin through default board id. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Reviewed-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20250116032835.118397-1-quic_aarasahu@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29wifi: ath9k: return by of_get_mac_addressRosen Penev
[ Upstream commit dfffb317519f88534bb82797f055f0a2fd867e7b ] When using nvmem, ath9k could potentially be loaded before nvmem, which loads after mtd. This is an issue if DT contains an nvmem mac address. If nvmem is not ready in time for ath9k, -EPROBE_DEFER is returned. Pass it to _probe so that ath9k can properly grab a potentially present MAC address. Signed-off-by: Rosen Penev <rosenp@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20241105222326.194417-1-rosenp@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29wifi: ath12k: fix ath12k_hal_tx_cmd_ext_desc_setup() info1 overrideNicolas Escande
[ Upstream commit df11edfba49e5fb69f4c9e7cb76082b89c417f78 ] Since inception there is an obvious typo laying around in ath12k_hal_tx_cmd_ext_desc_setup(). Instead of initializing + adding flags to tcl_ext_cmd->info1, we initialize + override. This will be needed in the future to make broadcast frames work with ethernet encapsulation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250127071306.1454699-1-nico.escande@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29wifi: ath12k: Avoid napi_sync() before napi_enable()Avula Sri Charan
[ Upstream commit 268c73d470a5790a492a2fc2ded084b909d144f3 ] In case of MHI error a reset work will be queued which will try napi_disable() after napi_synchronize(). As the napi will be only enabled after qmi_firmware_ready event, trying napi_synchronize() before napi_enable() will result in indefinite sleep in case of a firmware crash in QMI init sequence. To avoid this, introduce napi_enabled flag to check if napi is enabled or not before calling napi_synchronize(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Avula Sri Charan <quic_asrichar@quicinc.com> Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250124090058.3194299-1-quic_tamizhr@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29wifi: ath12k: fix the ampdu id fetch in the HAL_RX_MPDU_START TLVP Praneesh
[ Upstream commit dff4f278ee1ef12d822b7ed2a1048d27037209bb ] Currently, ampdu id is update with peer id mask which is incorrect. Therefore, update the ampdu id with PPDU id mask value. Also move the ampdu_id field inside the user stats since it is a user id based statistics. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-7-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29wifi: ath12k: Improve BSS discovery with hidden SSID in 6 GHz bandRamasamy Kaliappan
[ Upstream commit 27d38bdfd416f4db70e09c3bef3b030c86fd235a ] Currently, sometimes, the station is unable to identify the configured AP SSID in its scan results when the AP is not broadcasting its name publicly and has a hidden SSID. Currently, channel dwell time for an ath12k station is 30 ms. Sometimes, station can send broadcast probe request to AP close to the end of dwell time. In some of these cases, before AP sends a response to the received probe request, the dwell time on the station side would come to an end. So, the station will move to scan next channel and will not be able to acknowledge the unicast probe response. Resolve this issue by increasing station's channel dwell time to 70 ms, so that the it remains on the same channel for a longer period. This would increase the station's chance of receiving probe response from the AP. The station will then send a response acknowledgment back to the AP, thus leading to successful scan and BSS discovery. With an increased dwell time, scan would take longer than it takes now. But, this fix is an improvement for hidden SSID scan issue. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250207060005.153835-1-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29wifi: ath12k: Report proper tx completion status to mac80211Vinith Kumar R
[ Upstream commit d2d9c9b8de725e1006d3aa3d18678a732f5d3584 ] Currently Tx completion for few exception packets are received from firmware and the tx status updated to mac80211. The tx status values of HAL_WBM_REL_HTT_TX_COMP_STATUS_DROP and HAL_WBM_REL_HTT_TX_COMP_STATUS_TTL are considered as tx failure and reported as tx failure to mac80211. But these failure status is due to internal firmware tx drop and these packets were not tried to transmit in the air. In case of mesh this invalid tx status report might trigger mpath broken issue due to increase in mpath fail average. So do not report these tx status as tx failure instead free the skb by calling ieee80211_free_txskb(), and that will be accounted as dropped frame. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com> Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241122173432.2064858-1-quic_tamizhr@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-25wifi: ath12k: Fix invalid entry fetch in ath12k_dp_mon_srng_processP Praneesh
commit 63fdc4509bcf483e79548de6bc08bf3c8e504bb3 upstream. Currently, ath12k_dp_mon_srng_process uses ath12k_hal_srng_src_get_next_entry to fetch the next entry from the destination ring. This is incorrect because ath12k_hal_srng_src_get_next_entry is intended for source rings, not destination rings. This leads to invalid entry fetches, causing potential data corruption or crashes due to accessing incorrect memory locations. This happens because the source ring and destination ring have different handling mechanisms and using the wrong function results in incorrect pointer arithmetic and ring management. To fix this issue, replace the call to ath12k_hal_srng_src_get_next_entry with ath12k_hal_srng_dst_get_next_entry in ath12k_dp_mon_srng_process. This ensures that the correct function is used for fetching entries from the destination ring, preventing invalid memory accesses. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Link: https://patch.msgid.link/20241223060132.3506372-7-quic_ppranees@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-25Revert "wifi: ath12k: Fix invalid entry fetch in ath12k_dp_mon_srng_process"Alexander Tsoy
This reverts commit 535b666118f6ddeae90a480a146c061796d37022 which is commit 63fdc4509bcf483e79548de6bc08bf3c8e504bb3 upstream as it was backported incorrectly. A subsequent commit will re-backport the original patch. Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 01:02:54 +0000