summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/wil6210/txrx.h
AgeCommit message (Collapse)Author
2019-10-31wil6210: add SPDX license identifiersLior David
Change all files to add SPDX license identifiers and remove license text. This is only an administrative change, there is no change in actual license or copyright for any file. Signed-off-by: Lior David <liord@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-12wil6210: fix PTK re-key raceAhmad Masri
Fix a race between cfg80211 add_key call and transmitting of 4/4 EAP packet. In case the transmit is delayed until after the add key takes place, message 4/4 will be encrypted with the new key, and the receiver side (AP) will drop it due to MIC error. Wil6210 will monitor and look for the transmitted packet 4/4 eap key. In case add_key takes place before the transmission completed, then wil6210 will let the FW store the key and wil6210 will notify the FW to use the PTK key only after 4/4 eap packet transmission was completed. Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-12wil6210: add wil_netif_rx() helper functionDedy Lansky
Move common part of wil_netif_rx_any into new helper function and add support for non-gro receive using netif_rx_ni. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28wil6210: accessing 802.3 addresses via utility functionsAhmad Masri
Rearrange the code by having functions to access 802.3 header members, source and destination addresses. Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28wil6210: support up to 20 stations in AP modeAhmad Masri
New FW added support for upto 20 clients in AP mode. Change the driver to support this as well. FW reports it's max supported associations in WMI_READY_EVENT. Some WMI commands/events use cidxtid field which is limited to 16 cids. Use new cid/tid fields instead. For Rx packets cid from rx descriptor is limited to 3 bits (0..7), to find the real cid, compare transmitter address with the stored stations mac address in the driver sta array. EDMA FW still supports 8 stations. Extending the support to 20 stations will come later. Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28wil6210: remove rtap_include_phy_info module paramMaya Erez
Due to a HW issue in PHY info collection rtap_include_phy_info is not in use, hence can be removed. Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-31wil6210: add TX latency statisticsDedy Lansky
Collect statistics of TX latency. The latency is measured from the time the HW gets aware of new SKB to transmit until the HW indicates tx complete for this SKB. The statistics are shown via new "tx_latency" debugfs. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-31wil6210: Rx multicast packets duplicate detectionDedy Lansky
Store the last received multicast sequence number (SN) part of the TID info. Drop Rx multicast packets with retry bit set which their SN is equal to the last received. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-02wil6210: add support for enhanced DMA RX data flowsGidon Studinski
Enhanced DMA RX data path is handled using a single RX descriptor ring for all VIFs. Multiple RX status rings are supported, to allow RSS and multi MSI support. The driver gets the RX completions via the RX status rings. The RX status message includes the completed RX buffer ID, which points to the allocated SKB. The enhanced DMA RX data flow supports RX chaining, where multiple SKBs are merged into a single packet. Enhanced DMA HW supports RX HW reorder offload, enabled by default for Talyn-MB. amsdu_en debugfs entry was added to allow control MSDU aggregation. Use the following command to disable AMSDU (enabled by default): echo 0 > amsdu_en Signed-off-by: Gidon Studinski <gidons@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-02wil6210: add support for enhanced DMA TX data flowsMaya Erez
The enhanced DMA TX data path is handled using a descriptor ring per connection and a single status ring. The driver gets TX completions via the TX status ring. Each status message points to the completed descriptor ring and includes the number of completed descriptors in this ring. Non TSO enhanced DMA TX descriptors are similar to legacy DMA TX descriptors, hence the same transmit function can be used. However, enhanced DMA TSO frames division is performed by the HW, hence a new function is added to handle enhanced DMA TSO. Signed-off-by: Gidon Studinski <gidons@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-02wil6210: initialize TX and RX enhanced DMA ringsGidon Studinski
Enhanced DMA design includes the following rings: - Single RX descriptor ring is used for all VIFs - Multiple RX status rings are supported, to allow RSS - TX descriptor ring is allocated per connection - A single TX status ring is used for all TX descriptor rings This patch initializes and frees the above descriptor and status rings. The RX SKBs are handled by a new entity of RX buffers manager, which handles RX buffers, each one points to an allocated SKB. During Rx completion processing, the driver extracts a buffer ID which is used as an index to the buffers array. After the SKB is freed the buffer is moved from the 'active' list to the 'free' list, indicating it can be used for another descriptor. During Rx refill, SKBs are allocated and attached to 'free' buffers. Those buffers are attached to new descriptors and moved to the 'active' list. New debugfs entries were added to allow edma configuration: Run the following command to configure the number of status rings: echo NUM_OF_STATUS_RINGS > num_rx_status_rings Run the following command to use extended RX status message for additional debug fields from HW: echo 0 > compressed_rx_status Run the following command to control the size of the TX status ring: echo TX_STATUS_RING_ORDER > tx_status_ring_order The status ring size will be 1 << tx_status_ring_order Run the following command to control the size of the RX status ring: echo RX_STATUS_RING_ORDER > rx_status_ring_order Due to HW constrains RX sring order should be bigger than RX ring order The status ring size will be 1 << rx_status_ring_order Run the following command to change the number of RX buffer IDs: echo RX_BUFF_ID_COUNT > rx_buff_id_count Signed-off-by: Gidon Studinski <gidons@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-02wil6210: add support for enhanced DMA structuresGidon Studinski
In enhanced DMA the vrings are handled internally by the FW and are not exposed to the driver. Instead, the driver handles descriptor rings, which are mapped by the FW to vrings. The completions of the TX and RX descriptors are notified to the driver using status rings. Each status ring descriptor includes information of the completed descriptors and the ring id of their descriptor ring. This patch changes struct vring to generic wil_ring to allow its reuse for enhanced DMA descriptor rings and adds the descriptor and status rings specific descriptors. The vring debugfs entries have changed as follows: - dbg_vring_index has changed to dbg_ring_index - vrings has changed to rings - vring_idle_trsh has changed to ring_idle_trsh - vring_index has changed to ring_index Signed-off-by: Gidon Studinski <gidons@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-27wil6210: multiple VIFs support for connections and data pathLior David
Track the connection status per-VIF. The data path code is also updated to support multiple VIFs. This includes RX and TX VRING management, NAPI poll loops, RX reordering and related code. Power management code used to check if the main interface is up or based on connection state of the main interface, adapt this code to take all VIFs into account. Signed-off-by: Lior David <liord@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-07wil6210: replay attack detectionVladimir Kondratiev
Check PN for encrypted frames. Maintain PN data for Rx keys, pairwise per TID and group. Print PN's in the debugfs "stations" entry, like: [0] 04:ce:14:0a:3c:3d connected [ 0] ([32] 0 TU) 0x0fe [____________________________|___] total 252 drop 0 (dup 0 + old 0) last 0x000 [ 0] PN [0+]000000000000 [1-]000000000000 [2-]000000000000 [3-]000000000000 [GR] PN [0-]000000000000 [1+]000000000000 [2+]000000000000 [3-]000000000000 Rx invalid frame: non-data 0, short 0, large 0, replay 0 Rx/MCS: 0 110 65 65 65 0 12 0 0 0 0 0 0 [1] 00:00:00:00:00:00 unused [2] 00:00:00:00:00:00 unused [3] 00:00:00:00:00:00 unused [4] 00:00:00:00:00:00 unused [5] 00:00:00:00:00:00 unused [6] 00:00:00:00:00:00 unused [7] 00:00:00:00:00:00 unused Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-09wil6210: support BAR (BlockAck Req)Vladimir Kondratiev
BAR frames delivered to the host via Rx path; whole BAR frame get delivered. Advance sequence in the reorder buffer and release old frames, as per IEEE802.11 spec. Firmware will reply to BAR, driver responsibility is only reorder buffer management. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-06wil6210: TSO implementationVladimir Kondratiev
Driver report supported TSO (v4 & v6) and IP checksum offload in addition to previously supported features. In data path skbs are checked for non-zero gso_size, and when detected sent to additional function for processing TSO SKBs. Since HW does not fully support TSO, additional effort is required from the driver. Driver partitions the data into mss sized descriptors which are then DMAed to the HW. Signed-off-by: Vladimir Shulman <QCA_shulmanv@QCA.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-05-04wil6210: update Rx descriptor fieldsVladimir Kondratiev
Rx descriptor fields accordingly to the updated hardware documentation Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-01-15wil6210: Tx/Rx descriptors documentationVladimir Kondratiev
Sync documentation for the Tx/Rx descriptors with the firmware/hardware documentation. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: fix reordering for MCASTVladimir Kondratiev
In the reordering block, Ethernet DA was checked for MCAST, this is wrong. Check instead MCAST indication from 802.11 MAC header. Hardware saves this into Rx descriptor. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: fix max. MPDU sizeVladimir Kondratiev
When configuring Tx/Rx VRING's, driver need to specify max. MPDU size It should take into account all overhead introduced by 802.3->208.11 transformation. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-10-30wil6210: Add support for large packetsVladimir Kondratiev
It is possible to configure driver using mtu_max module parameter by setting it to value in range of 68..7920 inclusive. This is sub-optimal performance-wise in case packet is larger than 1 page. mtu_max default value is 2228. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: enlarge TX/RX buffer lengthVladimir Kondratiev
HW supports upto 2304 packet size on the air. HW is responsible for adding (Tx) or removing (Rx) the following headers: 802.11 hdr: 26B SNAP: 8B CRC: 4B Security (optional): 24B HW adds max 62B to the payload passed from driver. It means driver can use max packet size of 2304-62 = 2242B Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11wil6210: coding style fixesVladimir Kondratiev
- parentheses, indentation, typos - seq_puts() instead of seq_printf() with single argument - sizeof(var) vs. sizeof(type) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-25wil6210: update copyright year 2014Vladimir Kondratiev
Fix Copyright headers in all files changed in 2014, to mention 2014 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: Block ACKVladimir Kondratiev
When running multiple connections, hardware can't do BACK reordering and it should be done on the host. Model after mac80211's implementation. Drop RCU for now; to be re-added when BACK will be stabilized BACK handshaking is not implemented yet in the hardware, pretend it was done to support the way FW operating Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22wil6210: Enable TCP/UDP checksum HW offloadKirshenbaum Erez
Add support for TCP and UDP HW checksum offloading. RX chain is allways configured for offload mode. In case of checksum error in RX path the DMA L4 error bit(5) will be set to 1 and driver will drop the packet. TX checksum offloading is configrable (ethtool -K). TX descriptors are configured for checksum offload according to the SKB protocol type (TCP/UDP, IPV4/6), Upon mismatch drop the TX packet (checksum required but not TCP/UDP IPV4/6 type). Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24wil6210: add HW write-back option in TX descriptorKirshenbaum Erez
Map BIT 9 in TX DMA DWARD 0 as HW write back option. We must turn on this option in the last TX descriptor, this is required for old HW compatability. This option indicate to HW that WB is required for this descriptor. Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22wil6210: fix remaining use of non-cached copy of tx/rx descriptorsVladimir Kondratiev
- Introduce common code for Tx/Rx descriptor physical address set/parse - Fix endianness for address fields - consistent descriptor naming: '_d' for non-cached memory, 'd' for cached copy - wil_tx_desc_map now modify cached copy, no need for 'volatile' Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22wil6210: 'length' in Tx/Rx descriptors is little endianVladimir Kondratiev
Hardware uses little endian for the Tx/Rx descriptors field 'length', do appropriate conversions Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22wil6210: more Rx descriptor accessor functionsVladimir Kondratiev
Helpers to fetch various fields from the Rx descriptor Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22wil6210: Use cached copy of Rx descriptorVladimir Kondratiev
Rx descriptors stored in non-cacheable memory area for DMA. Non-cacheable memory causes long access time from CPU. Copy rx descriptor to the skb->cb, and use this copy. It provides faster memory access, and will be usefull to keep Rx information for later processing (BACK reorder) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-04wireless: add new wil6210 802.11ad 60GHz driverVladimir Kondratiev
This adds support for the 60 GHz 802.11ad Wilocity card through a new driver, wil6210. Wilocity implemented the firmware, QCA maintains the device driver. Currently supported: - STA: with security - AP: limited to 1 connected STA, security disabled - Monitor: due to a hardware/firmware limitation either control or non-control frames are monitored Using a STA and AP with this drive, one can assemble a fully functional BSS. Throughput of 1.2Gbps is achieved with iperf. The wil6210 cards have on-board flash memory for the firmware, the cards comes pre-flashed and no firmware download is required. For more details see: http://wireless.kernel.org/en/users/Drivers/wil6210 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 21:44:43 +0000