summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/main.c
AgeCommit message (Collapse)Author
2014-01-03ath9k: Fix "cc_lock" usageSujith Manoharan
IRQ save/restore is not required for the cycle counters since they are accessed only from softirq and process context. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Process BB watchdog events in the taskletSujith Manoharan
Move the BB processing code to the tasklet and avoid doing it in the ISR, there is no real benefit and this makes the ISR less heavy. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Remove RX PollSujith Manoharan
This patch removes the convoluted and hacky method of monitoring for connectivity. We rely on mac80211's connection loss logic and doing it in the driver is not necessary. The HW check for MAC/BB hangs is also simplified, there is no need to have a separate work instance for it. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Fix baseband watchdog resetSujith Manoharan
Do a HW reset only for required signatures. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Fix baseband watchdog interruptsSujith Manoharan
Program the required baseband watchdog interrupt mask to ensure that the correct watchdog interrupts are raised when the BB is hung for some reason. Also, use the capability HW_BB_WATCHDOG instead of relying on other flags. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Fix max AMPDU size calculationSujith Manoharan
The maximum A-MPDU size is calculated in ath_tx_aggr_start(), so there is no need to do it in node_attach() too. Also, make sure that the correct size is calculated as described in 8.4.2.58.3. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-19ath9k: call ath9k_set_tsfadjust from ath9k_beacon_configFelix Fietkau
Make that function and ath9k_allow_beacon_config static Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-19ath9k: move ath9k_debug_sync_cause out of ath9k_hwFelix Fietkau
ath9k_hw should not depend on any ath9k data structures like ath_softc Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18ath9k: properly preserve TSF across resetFelix Fietkau
The beacon code previously reset TSF on every configuration call, as some of the code was not prepared to properly calculate nexttbtt based on current TSF. This patch adds a common function for calculating nexttbtt and moves the TSF reset to driver start. This should improve AP mode compatibility with various stations that expect the TSF to not randomly jump due to hardware resets. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18ath9k_hw: clean up generic timer codeFelix Fietkau
- Use generic bitops instead of custom hackery - Move interrupt enable/disable logic from ath9k to ath9k_hw - Decouple ISR call from btcoex - Make the overflow callback optional (to prevent IRQ storms) Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-17ath9k_htc: properly set MAC address and BSSID maskMathy Vanhoef
Pick the MAC address of the first virtual interface as the new hardware MAC address. Set BSSID mask according to this MAC address. This fixes CVE-2013-4579. Signed-off-by: Mathy Vanhoef <vanhoefm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: optimize ath9k_flushFelix Fietkau
Instead of checking the queues in a loop with hardcoded sleep times inbetween, use a wait queue to trigger queue checks after the tx processing tasklet has run. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: use a timer to put hardware into full sleepFelix Fietkau
When operating in client mode, the short period of time between scanning and associating is often enough to put the hardware through several FULL-SLEEP <-> AWAKE transitions, each wakeup requiring a reset to fully recover the hardware. This is completely unnecessary and can easily be avoided by deferring the switch to full sleep. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Use CONFIG_ATH9K_WOWSujith Manoharan
Move the WoW code to wow.c and compile it conditionally based on CONFIG_ATH9K_WOW. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Fix TX99 config option usageSujith Manoharan
Use CONFIG_ATH9K_TX99 to properly enclose the tx99 code and make sure that it is not compiled as part of the driver when it is not selected. Move the tx99 code to a new file tx99.c and also add ATH9K_DEBUGFS as a dependency in Kconfig. This reduces the module size on platforms like OpenWrt where ATH9K_DEBUGFS is selected, but TX99 might be disabled. Cc: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/drv.c
2013-10-18ath9k: add TX99 supportLuis R. Rodriguez
TX99 support enables Specific Absorption Rate (SAR) testing. SAR is the unit of measurement for the amount of radio frequency(RF) absorbed by the body when using a wireless device. The RF exposure limits used are expressed in the terms of SAR, which is a measure of the electric and magnetic field strength and power density for transmitters operating at frequencies from 300 kHz to 100 GHz. Regulatory bodies around the world require that wireless device be evaluated to meet the RF exposure limits set forth in the governmental SAR regulations. In the examples below, for more bit rate options see the iw TX bitrate setting documentation: http://wireless.kernel.org/en/users/Documentation/iw#Modifying_transmit_bitrates Example usage: iw phy phy0 interface add moni0 type monitor ip link set dev moni0 up iw dev moni0 set channel 36 HT40+ iw set bitrates mcs-5 4 echo 10 > /sys/kernel/debug/ieee80211/phy0/ath9k/tx99_power echo 1 > /sys/kernel/debug/ieee80211/phy0/ath9k/tx99 Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: make ath9k_uses_beacons staticFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: move channel change code to ath_set_channelFelix Fietkau
Preparation for adding the scanning state machine to ath9k Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: make ath9k_cmn_update_ichannel staticFelix Fietkau
Rework its wrapper function to make it more generic, using it as a replacement for previous calls to ath9k_cmn_update_ichannel. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-07ath9k: fix tx queue scheduling after channel changesFelix Fietkau
Otherwise, if queues are full during a scan, tx scheduling does not resume after switching back to the home channel. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Handle FATAL interrupts correctlySujith Manoharan
When a FATAL interrupt is received, a full chip reset is required, which is done in the main tasklet. But since the reset routine is scheduled as a work item, make sure that interrupts are not enabled in the tasklet before the reset is done. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c net/mac80211/ibss.c
2013-08-22ath9k: Enable PLL fix only for AR9340/AR9330Sujith Manoharan
The PLL hang workaround is required only for AR9330 and AR9340. This issue was first observed on an AP121 and the WAR is enabled for AR9340 also (DB120 etc.), since it uses a PLL design identical to AR9330. This is not required for AR9485 and AR9550. Various bugs have been reported regarding this: https://bugzilla.redhat.com/show_bug.cgi?id=997217 https://bugzilla.redhat.com/show_bug.cgi?id=994648 Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: enable CSA functionality in ath9kSimon Wunderlich
CSA is only enabled for one interface, but the same limitation applies for mac80211 too. It checks whether the beacon has been sent (different approaches for non-EDMA-enabled and EDMA-enabled devices), and completes the channel switch after that. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: use chandef instead of channel_typeSimon Wunderlich
To enable support for 5/10 MHz, some internal functions must be converted from using the (old) channel_type to chandef. This is a good chance to change all remaining occurences. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-15ath9k: remove ath9k_sta_remove_debugfsFelix Fietkau
mac80211 uses debugfs_remove_recursive, so there's no need for the driver to do an explicit cleanup of its sta debugfs entry. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: use software queueing for multicast trafficFelix Fietkau
Create a per-vif dummy node entry for keeping the multicast software queues. This helps in setups with a lot of mulitcast traffic that could otherwise potentially drown out unicast traffic to stations. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: prepare queueing code for handling unaggregated trafficFelix Fietkau
- Allow ath_tx_get_tid_subframe to return non-AMPDU subframes. - Reset the tid paused state on aggregation stop - Initialize software queues even when HT is not supported Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-05ath9k: Remove ath_ant_comb_update()Sujith Manoharan
During a HW reset, the diversity config is programmed in the set_board_values() eeprom callback, there is no need to do it again by calling ath_ant_comb_update(). Fixed antenna support is not fully handled for 1-stream cards, it can be done later. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-16cfg80211/nl80211: rename packet pattern related structures and enumsAmitkumar Karwar
Currently packet patterns and it's enum/structures are used only for WoWLAN feature. As we intend to reuse them for new feature packet coalesce, they are renamed in this patch. Older names are kept for backward compatibility purpose. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-06-12ath9k: Fix noisefloor calibrationSujith Manoharan
The commits, "ath9k: Fix regression in channelwidth switch at the same channel" "ath9k: Fix invalid noisefloor reading due to channel update" attempted to fix noisefloor calibration when a channel switch happens due to HT20/HT40 bandwidth change. This is causing invalid readings resulting in messages like: "ath: phy16: NF[0] (-45) > MAX (-95), correcting to MAX". This results in an incorrect noise being used initially for reporting the signal level of received packets, until NF calibration is done and the history buffer is updated via the ANI timer, which happens much later. When a bandwidth change happens, it is appropriate to reset the internal history data for the channel. Do this correctly in the reset() routine by checking the "chanmode" variable. Cc: stable@vger.kernel.org Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12ath9k: implement support for .release_buffered_frames()Felix Fietkau
This adds support for PS-Poll and U-APSD driver-buffered frames (part of an aggregation session). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/Kconfig net/mac80211/iface.c
2013-06-03ath9k: Enable WoW only for AR9462Sujith Manoharan
The only card with which WoW has been tested and verified is AR9462. Do not enable it for all cards since WoW is really quirky and needs to be tested properly with each chip. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-29Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-05-22ath9k: Do not use local_bh_disable in ampdu_actionSujith Manoharan
This was added during the early conversion of ampdu_action to a sleeping callback. There is no need to do this - instead, use the normal mutex that is acquired for all callbacks. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22ath9k: Use bitops for scan flagSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22ath9k: Remove MAC_DEBUGSujith Manoharan
This option has not been enabled by default in any distribution, has never been enabled in OpenWrt and no developer has asked for this information in a bug report. Dumping pages of random values doesn't help debugging, remove this option (along with the vmalloc() abuse). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22ath9k: prevent aggregation session deadlocksFelix Fietkau
Waiting for all subframes of an existing aggregation session to drain before allowing mac80211 to start a new one is fragile and deadlocks caused by this behavior have been observed. Since mac80211 has proper synchronization for aggregation session start/stop handling, a better approach to session handling is to simply allow mac80211 to start a new session at any time. This requires changing the code to discard any packets outside of the BlockAck window in the A-MPDU software retry code. This patch implements the above and also simplifies the code. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k: fix aggregation stop/flush handlingFelix Fietkau
When aggregation stop is requested, don't run the mac80211 aggregation stop callback yet, while the session is still blocked. Also, when aggregation flush is requested, don't run the callback at all. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-08ath9k: Fix beacon reconfigurationSujith Manoharan
When a reset or a channel-change happens, for managed mode, the HW beacon timers have to be programmed after the TSF has been synchronized. This is handled via the sync flags. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-03ath9k: fix key allocation error handling for powersave keysFelix Fietkau
If no keycache slots are available, ath_key_config can return -ENOSPC. If the key index is not checked for errors, it can lead to logspam that looks like this: "ath: wiphy0: keyreset: keycache entry 228 out of range" This can cause follow-up errors if the invalid keycache index gets used for tx. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22ath9k: always set common->macaddr to the MAC adress of a virtual interfaceFelix Fietkau
In some cases it can be useful to change the MAC address of a virtual interface to something that's completely different from the EEPROM stored MAC address. In this case it is a bad idea to use the EEPROM MAC address for calculating the BSSID mask, as that would make it too wide. In one case a few devices have been observed to send ACKs for many packets on the channel not directed at them, which results in a neat Denial of Service attack on the channel. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/ath/carl9170/debug.c drivers/net/wireless/ath/carl9170/main.c net/mac80211/ieee80211_i.h
2013-04-10Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/rt2x00/rt2x00pci.c
2013-04-08ath9k: add support for DFS master modeZefir Kurtisi
These are the remaining knobs in ath9k to support DFS: * mark AR9280 and AR9580 as DFS tested * synchronize DFS regulatory domain to reg notifyer * set required RX filter flags for radar detection * process radar PHY errors at DFS detector * notify DFS master on radar detection DFS support requires CONFIG_ATH9K_DFS_CERTIFIED to be set. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03ath9k: Re-enable interrupts after a channel change failureRobert Shade
ath_complete_reset will not be called if ath9k_hw_reset is unsuccessful, so we need to re-enable intertupts to balence the previous ath_prepare_reset call. Also schedule a reset as a best effort method to recover the chip from whatever state caused the channel change failure. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=55771 Signed-off-by: Robert Shade <robert.shade@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chanKarl Beldan
Drivers that don't use chanctxes cannot perform VHT association because they still use a "backward compatibility" pair of {ieee80211_channel, nl80211_channel_type} in ieee80211_conf and ieee80211_local. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> [fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-18mac80211: pass queue bitmap to flush operationJohannes Berg
There are a number of situations in which mac80211 only really needs to flush queues for one virtual interface, and in fact during this frames might be transmitted on other virtual interfaces. Calculate and pass a queue bitmap to the driver so it knows which queues to flush. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 16:26:14 +0000