summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/init.c
AgeCommit message (Collapse)Author
2014-04-09ath9k: Enable DFS only when ATH9K_DFS_CERTIFIEDJanusz Dziedzic
Add DFS interface combination only when CONFIG_ATH9K_DFS_CERTIFIED is set. In other case user can run CAC/beaconing without proper handling of pulse events (without radar detection activated). Reported-by: Cedric Voncken <cedric.voncken@acksys.fr> Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28ath9k: move ath9k_reload_chainmask_settings to commonOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28ath9k: move setup_ht_cap to common-initOleksij Rempel
and rename it to ath9k_cmn_setup_ht_cap Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28ath9k: move ath9k_init_channels_rates to common-initOleksij Rempel
and rename it to ath9k_cmn_init_channels_rates. sbands are move to ath_common as well. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-24ath9k: Enable U-APSD AP mode supportJouni Malinen
mac80211 handles the actual operations, so ath9k can just indicate support for this. Based on initial tests, this combination seems to work fine. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-02-12ath9k: Remove ath9k rate controlSujith Manoharan
There is no benefit in retaining the legacy rate control module in the driver codebase. It is known to be buggy and has less than optimal performance in real-world environments compared with minstrel. The only reason that it was kept when we made the switch to minstrel as default was that it showed higher throughput numbers in a clean/ideal environment. This is no longer the case and minstrel can push ath9k to the same throughput levels. In TCP, with 3-stream cards, more than 295 Mbps can be obtained in open air, with 2-stream cards, 210 Mbps is easily reached. To test performance issues, instead of using a broken rate control module, it is better to use the fixed-rate interface provided by mac80211 anyway. The ath9k RC has not received any bug fixes in years and is just bit-rotting away - this patch removes it. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12ath9k: move ath9k_process_rssi to common.cOleksij Rempel
we can reuse this fucntion on ath9k_htc. Now we will need to use common version last_rssi, so switch it too. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-04ath9k: Do not support PowerSave by defaultSujith Manoharan
Even though we make sure PowerSave is not enabled by default by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init, PS could be enabled by userspace based on various factors like battery usage etc. Since PS in ath9k is just broken and has been untested for years, remove support for it, but allow a user to explicitly enable it using a module parameter. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-13Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2014-01-07mac80211: remove channel_change_timeJohannes Berg
This value is no longer used by mac80211, and practically no driver ever set it to a correct value anyway, so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-03ath9k: Remove RX PollSujith Manoharan
This patch removes the convoluted and hacky method of monitoring for connectivity. We rely on mac80211's connection loss logic and doing it in the driver is not necessary. The HW check for MAC/BB hangs is also simplified, there is no need to have a separate work instance for it. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18ath9k: Use a subroutine for the AR9330 reset WARSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18ath9k: Remove unneeded ref. count initializationSujith Manoharan
The interrupt reference counter is always initialized in ath9k_start(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18ath9k: Cleanup ath9k.hSujith Manoharan
* Remove unused macros. * Move definitions to appropriate sections. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09ath9k: Use a separate TX gain table for WZR-HP-G450HSujith Manoharan
The Buffalo device WZR-HP-G450H uses the index 3 for TX gain, which is set to the high_power table currently. Later variants of the router use the same index, but instead refer to the low_ob_db gain table. This is not handled in the driver since there is no way to distinguish board revisions and the high_power table is used (incorrectly) for the newer variants. By default, devices based on AR9300 using the TX gain index 3 have to use the high_power table. To make sure that WZR-HP-G450H is not broken when the high_power table is updated, use a separate array based on information obtained from the platform data. The current situation where only the original variant of WZR-HP-G450H works properly stays unchanged. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09ath9k: enable dfs for mesh modeChun-Yeow Yeoh
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: optimize ath9k_flushFelix Fietkau
Instead of checking the queues in a loop with hardcoded sleep times inbetween, use a wait queue to trigger queue checks after the tx processing tasklet has run. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: use a timer to put hardware into full sleepFelix Fietkau
When operating in client mode, the short period of time between scanning and associating is often enough to put the hardware through several FULL-SLEEP <-> AWAKE transitions, each wakeup requiring a reset to fully recover the hardware. This is completely unnecessary and can easily be avoided by deferring the switch to full sleep. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Add an initialization routine for WoWSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Use CONFIG_ATH9K_WOWSujith Manoharan
Move the WoW code to wow.c and compile it conditionally based on CONFIG_ATH9K_WOW. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Identify Killer Wireless cardsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-11ath9k: Use correct PCIE initvals for AR9485Sujith Manoharan
Currently, the PLL is turned off for AR9485 when switching to a low power state, but AR9485 has an issue where the card will become unresponsive if left idle for a long time without any traffic. To fix this, force the PLL to always be on using a different initval array, ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1. This is done for most of the AR9485 based cards like HB125, WB225 etc. but certain models require the feature to be turned off. Identify such cards and use default values for them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-11ath9k: DFS radar use correct width enumJanusz Dziedzic
Use correct width enums when setup radar_detect_widths for DFS. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-07ath9k: enable DFS for IBSS modeSimon Wunderlich
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18ath9k: add TX99 supportLuis R. Rodriguez
TX99 support enables Specific Absorption Rate (SAR) testing. SAR is the unit of measurement for the amount of radio frequency(RF) absorbed by the body when using a wireless device. The RF exposure limits used are expressed in the terms of SAR, which is a measure of the electric and magnetic field strength and power density for transmitters operating at frequencies from 300 kHz to 100 GHz. Regulatory bodies around the world require that wireless device be evaluated to meet the RF exposure limits set forth in the governmental SAR regulations. In the examples below, for more bit rate options see the iw TX bitrate setting documentation: http://wireless.kernel.org/en/users/Documentation/iw#Modifying_transmit_bitrates Example usage: iw phy phy0 interface add moni0 type monitor ip link set dev moni0 up iw dev moni0 set channel 36 HT40+ iw set bitrates mcs-5 4 echo 10 > /sys/kernel/debug/ieee80211/phy0/ath9k/tx99_power echo 1 > /sys/kernel/debug/ieee80211/phy0/ath9k/tx99 Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18ath9k: dfs kill ath9k specyfic codeJanusz Dziedzic
Kill of using ath9k_hw_common() function in dfs detector code. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: remove sc->config.cabqReadyTimeFelix Fietkau
It is not exposed as a configuration option anyway Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: make ath9k_cmn_update_ichannel staticFelix Fietkau
Rework its wrapper function to make it more generic, using it as a replacement for previous calls to ath9k_cmn_update_ichannel. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14ath9k: use a separate data structure for rx buffersFelix Fietkau
There's no shared code for handling both rx and tx buffers, and tx buffers require a lot more metadata than rx buffers. Using a separate data structure for rx reduces memory usage and improves cache footprint. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Identify WB335 Antenna configurationSujith Manoharan
There are 2 types of WB335 cards, 1-antenna and 2-antenna. Identify them based on PCI subsystem IDs, this will be used for MCI/BTCOEX tweaks. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26ath9k: Identify CUS252 cardsSujith Manoharan
These cards are based on WB335/AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c net/mac80211/ibss.c
2013-08-26ath9k: Fix ASPM workaround usageSujith Manoharan
The PCIE Workaround register (AR_WA/0x4004) is used to handle various hardware quirks. For AR9002 chips, AR_WA_D3_L1_DISABLE is used to prevent the HW from automatically entering L1 state when D3 is enforced. AR_WA_D3_L1_DISABLE has to be enabled for a few AR9280 based cards, mark them based on their PCI subdevice/subvendor IDs and enforce it in ar9002_hw_configpcipowersave(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-22ath9k: Add antenna diversity tweak for CUS198Sujith Manoharan
This improves RX diversity and performance for AR9485. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-21mac80211: add a flag to indicate CCK support for HT clientsFelix Fietkau
brcm80211 cannot handle sending frames with CCK rates as part of an A-MPDU session. Other drivers may have issues too. Set the flag in all drivers that have been tested with CCK rates. This fixes a reported brcmsmac regression introduced in commit ef47a5e4f1aaf1d0e2e6875e34b2c9595897bef6 "mac80211/minstrel_ht: fix cck rate sampling" Cc: stable@vger.kernel.org # 3.10 Reported-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-16ath9k: enable CSA functionality in ath9kSimon Wunderlich
CSA is only enabled for one interface, but the same limitation applies for mac80211 too. It checks whether the beacon has been sent (different approaches for non-EDMA-enabled and EDMA-enabled devices), and completes the channel switch after that. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: announce that ath9k supports 5/10 MHzSimon Wunderlich
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: set 5/10 MHz supported channels and fix bitrateSimon Wunderlich
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath9k: use chandef instead of channel_typeSimon Wunderlich
To enable support for 5/10 MHz, some internal functions must be converted from using the (old) channel_type to chandef. This is a good chance to change all remaining occurences. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: Fix BTCOEX usage for RX diversitySujith Manoharan
BTCOEX has to be *disabled* for WLAN RX diversity to work on combo cards. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-05ath9k: Set SWCOM value for CUS198Sujith Manoharan
CUS198/CUS230 cards require a custom value to be programmed into the SWCOM register. Assign this during init time. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-05ath9k: Add a HW capability for WLAN/BT RX diversitySujith Manoharan
Make use of this capability to restrict the usage of the debugfs file and modparam using which this feature can be enabled. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-05ath9k: Cleanup WLAN/BT RX diversitySujith Manoharan
For single-chain WLAN+BT cards, the BT antenna can be used for WLAN RX when the BT interface is disabled. Rename the modparam "antenna_diversity" to "bt_ant_diversity" to clarify this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-05ath9k: Fix antenna diversity for CUS198Sujith Manoharan
CUS198/CUS230 need a few tweaks in the antenna diversity algorithm to accomodate RSSI variation. Add a couple of knobs to control low RSSI threshold and fast antenna diversity bias values. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24ath9k: Enable WoW only for supported modelsSujith Manoharan
Since platform support is required for WoW, identify and and enable Wow only for supported cards. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Add PCI IDs for CUS217Sujith Manoharan
CUS217 is a card based on AR9462. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Modify IDs to identify CUS230Sujith Manoharan
CUS198 and CUS230 are similar cards, both are AR9485 + xLNA solutions. But, the subsystem IDs differ - identify CUS230 explicitly to make things clearer. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-14ath9k: Add custom parameters for CUS198Sujith Manoharan
CUS198 is a card based on AR9485. There are differences between the base reference design HB125 and CUS198. Identify such cards based on the PCI subsystem IDs and set HW parameters appropriately. Addresses this bug - https://bugzilla.kernel.org/show_bug.cgi?id=49201 Cc: jkp@iki.fi Cc: gfmichaud@gmail.com Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/iwlwifi/mvm/mac80211.c
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 12:55:35 +0000