summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath12k
AgeCommit message (Collapse)Author
2025-07-10wifi: ath12k: fix wrong handling of CCMP256 and GCMP ciphersRameshkumar Sundaram
[ Upstream commit f5d6b15d9503263d9425dcde9cc2fd401a32b0f2 ] Currently for CCMP256, GCMP128 and GCMP256 ciphers, in ath12k_install_key() IEEE80211_KEY_FLAG_GENERATE_IV_MGMT is not set and in ath12k_mac_mgmt_tx_wmi() a length of IEEE80211_CCMP_MIC_LEN is reserved for all ciphers. This results in unexpected drop of protected management frames in case either of above 3 ciphers is used. The reason is, without IEEE80211_KEY_FLAG_GENERATE_IV_MGMT set, mac80211 will not generate CCMP/GCMP headers in TX frame for ath12k. Also MIC length reserved is wrong and such frames are dropped by hardware. Fix this by setting IEEE80211_KEY_FLAG_GENERATE_IV_MGMT flag for above ciphers and by reserving proper MIC length for those ciphers. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250415195812.2633923-2-rameshkumar.sundaram@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-10wifi: ath12k: Handle error cases during extended skb allocationP Praneesh
[ Upstream commit 37a068fc9dc4feb8d76e8896bb33883d06c11a6b ] Currently, in the case of extended skb allocation, the buffer is freed before the DMA unmap operation. This premature deletion can result in skb->data corruption, as the memory region could be re-allocated for other purposes. Fix this issue by reordering the failure cases by calling dma_unmap_single() first, then followed by the corresponding kfree_skb(). This helps avoid data corruption in case of failures in dp_tx(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250411060154.1388159-2-praneesh.p@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-10wifi: ath12k: fix skb_ext_desc leak in ath12k_dp_tx() error pathNicolas Escande
[ Upstream commit 28a9972e0f0693cd4d08f431c992fa6be39c788c ] When vlan support was added, we missed that when ath12k_dp_prepare_htt_metadata() returns an error we also need to free the skb holding the metadata before going on with the cleanup process. Compile tested only. Fixes: 26dd8ccdba4d ("wifi: ath12k: dynamic VLAN support") Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250122160112.3234558-1-nico.escande@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Stable-dep-of: 37a068fc9dc4 ("wifi: ath12k: Handle error cases during extended skb allocation") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath12k: Clear affinity hint before calling ath12k_pci_free_irq() in ↵Manivannan Sadhasivam
error path commit b43b1e2c52db77c872bd60d30cdcc72c47df70c7 upstream. If a shared IRQ is used by the driver due to platform limitation, then the IRQ affinity hint is set right after the allocation of IRQ vectors in ath12k_pci_msi_alloc(). This does no harm unless one of the functions requesting the IRQ fails and attempt to free the IRQ. This may end up with a warning from the IRQ core that is expecting the affinity hint to be cleared before freeing the IRQ: kernel/irq/manage.c: /* make sure affinity_hint is cleaned up */ if (WARN_ON_ONCE(desc->affinity_hint)) desc->affinity_hint = NULL; So to fix this issue, clear the IRQ affinity hint before calling ath12k_pci_free_irq() in the error path. The affinity will be cleared once again further down the error path due to code organization, but that does no harm. Fixes: a3012f206d07 ("wifi: ath12k: set IRQ affinity to CPU0 in case of one MSI vector") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20250225053447.16824-3-manivannan.sadhasivam@linaro.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Wenshan Lan <jetlan9@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27wifi: ath12k: Pass correct values of center freq1 and center freq2 for 160 MHzSuraj P Kizhakkethil
[ Upstream commit b1b01e46a3db5ad44d1e4691ba37c1e0832cd5cf ] Currently, for 160 MHz bandwidth, center frequency1 and center frequency2 are not passed correctly to the firmware. Set center frequency1 as the center frequency of the primary 80 MHz channel segment and center frequency2 as the center frequency of the 160 MHz channel and pass the values to the firmware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Suraj P Kizhakkethil <quic_surapk@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250304095315.3050325-2-quic_surapk@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath12k: fix incorrect CE addressesBalamurugan S
[ Upstream commit 60031d9c3589c7983fd1deb4a4c0bebf0929890e ] In the current ath12k implementation, the CE addresses CE_HOST_IE_ADDRESS and CE_HOST_IE_2_ADDRESS are incorrect. These values were inherited from ath11k, but ath12k does not currently use them. However, the Ath12k AHB support relies on these addresses. Therefore, correct the CE addresses for ath12k. Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Signed-off-by: Balamurugan S <quic_bselvara@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Link: https://patch.msgid.link/20250321-ath12k-ahb-v12-2-bb389ed76ae5@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath12k: fix link valid field initialization in the monitor RxHari Chandrakanthan
[ Upstream commit 2826139f9295821fe2b049318a1cc057ec003131 ] Currently, the link_valid field is not initialized in the monitor Rx path. This can result in random values for the link_valid and link_id leads to undefined behaviour in mac80211. Therefore, initialize the link_valid field in the monitor Rx path. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250324062518.2752822-2-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath12k: fix failed to set mhi state error during reboot with hardware ↵Aditya Kumar Singh
grouping [ Upstream commit dce7aec6b1f74b0a46b901ab8de1f7bd0515f733 ] With hardware grouping, during reboot, whenever a device is removed, it powers down itself and all its partner devices in the same group. Now this is done by all devices and hence there is multiple power down for devices and hence the following error messages can be seen: ath12k_pci 0002:01:00.0: failed to set mhi state POWER_OFF(3) in current mhi state (0x0) ath12k_pci 0002:01:00.0: failed to set mhi state: POWER_OFF(3) ath12k_pci 0002:01:00.0: failed to set mhi state DEINIT(1) in current mhi state (0x0) ath12k_pci 0002:01:00.0: failed to set mhi state: DEINIT(1) ath12k_pci 0003:01:00.0: failed to set mhi state POWER_OFF(3) in current mhi state (0x0) ath12k_pci 0003:01:00.0: failed to set mhi state: POWER_OFF(3) ath12k_pci 0003:01:00.0: failed to set mhi state DEINIT(1) in current mhi state (0x0) ath12k_pci 0003:01:00.0: failed to set mhi state: DEINIT(1) ath12k_pci 0004:01:00.0: failed to set mhi state POWER_OFF(3) in current mhi state (0x0) ath12k_pci 0004:01:00.0: failed to set mhi state: POWER_OFF(3) To prevent this, check if the ATH12K_PCI_FLAG_INIT_DONE flag is already set before powering down. If it is set, it indicates that another partner device has already performed the power down, and this device can skip this step. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-3-95e7bf048595@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath12k: using msdu end descriptor to check for rx multicast packetsSarika Sharma
[ Upstream commit cb7433cc5cd4d07175dbc41f5a19966e9fae48be ] Currently, the RX multicast broadcast packet check is performed using bit 15 from the info6 field of the MPDU start descriptor. This check can also be done using bit 9 from the info5 field of the MSDU end descriptor. However, in some scenarios multicast bit is not set when fetched from MPDU start descriptor. Therefore, checking the RX multicast broadcast packet from the MSDU end descriptor is more reliable as it is per MSDU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250411061523.859387-2-quic_sarishar@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath12k: fix a possible dead lock caused by ab->base_lockBaochen Qiang
[ Upstream commit ef115c265a21e3c11deee7f73bd1061775a7bf20 ] spin_lock/spin_unlock are used in ath12k_reg_chan_list_event to acquire/release ab->base_lock. For now this is safe because that function is only called in soft IRQ context. But ath12k_reg_chan_list_event() will be called from process context in an upcoming patch, and this can result in a deadlock if ab->base_lock is acquired in process context and then soft IRQ occurs on the same CPU and tries to acquire that lock. Fix it by using spin_lock_bh and spin_unlock_bh instead. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-1-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath12k: fix macro definition HAL_RX_MSDU_PKT_LENGTH_GETKang Yang
[ Upstream commit a69bbf89d751ba2d6da21d773c4e29c91c5e53c4 ] Currently, HAL_RX_MSDU_PKT_LENGTH_GET uses u32_get_bits to obtain the MSDU length from the MSDU description. This is not right. Because all halphy descriptions are little endian. So use le32_get_bits for HAL_RX_MSDU_PKT_LENGTH_GET. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-9-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27wifi: ath12k: fix ring-buffer corruptionJohan Hovold
commit 6b67d2cf14ea997061f61e9c8afd4e1c0f22acb9 upstream. Users of the Lenovo ThinkPad X13s have reported that Wi-Fi sometimes breaks and the log fills up with errors like: ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1484, expected 1492 ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1460, expected 1484 which based on a quick look at the ath11k driver seemed to indicate some kind of ring-buffer corruption. Miaoqing Pan tracked it down to the host seeing the updated destination ring head pointer before the updated descriptor, and the error handling for that in turn leaves the ring buffer in an inconsistent state. While this has not yet been observed with ath12k, the ring-buffer implementation is very similar to the ath11k one and it suffers from the same bugs. Add the missing memory barrier to make sure that the descriptor is read after the head pointer to address the root cause of the corruption while fixing up the error handling in case there are ever any (ordering) bugs on the device side. Note that the READ_ONCE() are only needed to avoid compiler mischief in case the ring-buffer helpers are ever inlined. Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable@vger.kernel.org # 6.3 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218623 Link: https://lore.kernel.org/20250310010217.3845141-3-quic_miaoqing@quicinc.com Cc: Miaoqing Pan <quic_miaoqing@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Miaoqing Pan <quic_miaoqing@quicinc.com> Link: https://patch.msgid.link/20250321095219.19369-1-johan+linaro@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850Baochen Qiang
[ Upstream commit 7588a893cde5385ad308400ff167d29a29913b3a ] GCC_GCC_PCIE_HOT_RST is wrongly defined for WCN7850, causing kernel crash on some specific platforms. Since this register is divergent for WCN7850 and QCN9274, move it to register table to allow different definitions. Then correct the register address for WCN7850 to fix this issue. Note IPQ5332 is not affected as it is not PCIe based device. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reported-by: Parth Pancholi <parth.pancholi@toradex.com> Closes: https://lore.kernel.org/all/86899b2235a59c9134603beebe08f2bb0b244ea0.camel@gmail.com Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Tested-by: Parth Pancholi <parth.pancholi@toradex.com> Link: https://patch.msgid.link/20250523-ath12k-wrong-global-reset-addr-v1-1-3b06eb556196@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: refactor ath12k_hw_regs structureP Praneesh
[ Upstream commit 5257324583e32fd5bd6bbb6c82b4f5880b842f99 ] IPQ5332 device have different register address values for the below registers: HAL_TCL1_RING_BASE_LSB HAL_TCL1_RING_BASE_MSB HAL_TCL2_RING_BASE_LSB HAL_SEQ_WCSS_UMAC_CE0_SRC_REG HAL_SEQ_WCSS_UMAC_CE0_DST_REG HAL_SEQ_WCSS_UMAC_CE1_SRC_REG HAL_SEQ_WCSS_UMAC_CE1_DST_REG Hence, refactor ath12k_hw_regs structure to accommodate these changes in IPQ5332. Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Balamurugan S <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan S <quic_bselvara@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Link: https://patch.msgid.link/20250321-ath12k-ahb-v12-3-bb389ed76ae5@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Stable-dep-of: 7588a893cde5 ("wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: fix memory leak in ath12k_service_ready_ext_eventRajat Soni
[ Upstream commit 89142d34d5602c7447827beb181fa06eb08b9d5c ] Currently, in ath12k_service_ready_ext_event(), svc_rdy_ext.mac_phy_caps is not freed in the failure case, causing a memory leak. The following trace is observed in kmemleak: unreferenced object 0xffff8b3eb5789c00 (size 1024): comm "softirq", pid 0, jiffies 4294942577 hex dump (first 32 bytes): 00 00 00 00 01 00 00 00 00 00 00 00 7b 00 00 10 ............{... 01 00 00 00 00 00 00 00 01 00 00 00 1f 38 00 00 .............8.. backtrace (crc 44e1c357): __kmalloc_noprof+0x30b/0x410 ath12k_wmi_mac_phy_caps_parse+0x84/0x100 [ath12k] ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k] ath12k_wmi_svc_rdy_ext_parse+0x308/0x4c0 [ath12k] ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k] ath12k_service_ready_ext_event.isra.0+0x44/0xd0 [ath12k] ath12k_wmi_op_rx+0x2eb/0xd70 [ath12k] ath12k_htc_rx_completion_handler+0x1f4/0x330 [ath12k] ath12k_ce_recv_process_cb+0x218/0x300 [ath12k] ath12k_pci_ce_workqueue+0x1b/0x30 [ath12k] process_one_work+0x219/0x680 bh_worker+0x198/0x1f0 tasklet_action+0x13/0x30 handle_softirqs+0xca/0x460 __irq_exit_rcu+0xbe/0x110 irq_exit_rcu+0x9/0x30 Free svc_rdy_ext.mac_phy_caps in the error case to fix this memory leak. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Rajat Soni <quic_rajson@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Link: https://patch.msgid.link/20250430-wmi-mem-leak-v1-1-fcc9b49c2ddc@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: fix node corruption in ar->arvifs listMaharaja Kennadyrajan
[ Upstream commit 823435bd23108d6f8be89ea2d025c0e2e3769c51 ] In current WLAN recovery code flow, ath12k_core_halt() only reinitializes the "arvifs" list head. This will cause the list node immediately following the list head to become an invalid list node. Because the prev of that node still points to the list head "arvifs", but the next of the list head "arvifs" no longer points to that list node. When a WLAN recovery occurs during the execution of a vif removal, and it happens before the spin_lock_bh(&ar->data_lock) in ath12k_mac_vdev_delete(), list_del() will detect the previously mentioned situation, thereby triggering a kernel panic. The fix is to remove and reinitialize all vif list nodes from the list head "arvifs" during WLAN halt. The reinitialization is to make the list nodes valid, ensuring that the list_del() in ath12k_mac_vdev_delete() can execute normally. Call trace: __list_del_entry_valid_or_report+0xd4/0x100 (P) ath12k_mac_remove_link_interface.isra.0+0xf8/0x2e4 [ath12k] ath12k_scan_vdev_clean_work+0x40/0x164 [ath12k] cfg80211_wiphy_work+0xfc/0x100 process_one_work+0x164/0x2d0 worker_thread+0x254/0x380 kthread+0xfc/0x100 ret_from_fork+0x10/0x20 The change is mostly copied from the ath11k patch: https://lore.kernel.org/all/20250320053145.3445187-1-quic_stonez@quicinc.com/ Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250416021724.2162519-1-maharaja.kennadyrajan@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: Fix the QoS control field offset to build QoS headerRamasamy Kaliappan
[ Upstream commit 8599d4cc4191c8c1af34207a8b9414acca4afb59 ] Currently, in the mac80211 layer, received EAPOL packets are dropped when the HT control field is present in the QoS header. This issue arises due to an incorrect QoS control field offset used to build the QoS header in the MSDU data, leading to a corrupted header in the mac80211 layer. This issue also applies to other frames that contain the QoS control field, such as QoS data or Null frames. To resolve this, use ieee80211_get_qos_ctl() to obtain the correct QoS control offset from the MSDU data. Additionally, ensure the QoS control header is copied in little-endian format within the MSDU data. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com> Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250415184102.2707300-1-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: Add MSDU length validation for TKIP MIC errorP Praneesh
[ Upstream commit 763216fe6c5df95d122c71ef34c342427c987820 ] In the WBM error path, while processing TKIP MIC errors, MSDU length is fetched from the hal_rx_desc's msdu_end. This MSDU length is directly passed to skb_put() without validation. In stress test scenarios, the WBM error ring may receive invalid descriptors, which could lead to an invalid MSDU length. To fix this, add a check to drop the skb when the calculated MSDU length is greater than the skb size. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250416021903.3178962-1-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: fix invalid access to memorySarika Sharma
[ Upstream commit 9f17747fbda6fca934854463873c4abf8061491d ] In ath12k_dp_rx_msdu_coalesce(), rxcb is fetched from skb and boolean is_continuation is part of rxcb. Currently, after freeing the skb, the rxcb->is_continuation accessed again which is wrong since the memory is already freed. This might lead use-after-free error. Hence, fix by locally defining bool is_continuation from rxcb, so that after freeing skb, is_continuation can be used. Compile tested only. Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250408045327.1632222-1-quic_sarishar@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: Fix buffer overflow in debugfsDan Carpenter
[ Upstream commit 8c7a5031a6b0d42e640fbd2d5d05f61f74e32dce ] If the user tries to write more than 32 bytes then it results in memory corruption. Fortunately, this is debugfs so it's limited to root users. Fixes: 3f73c24f28b3 ("wifi: ath12k: Add support to enable debugfs_htt_stats") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/35daefbd-d493-41d9-b192-96177d521b40@stanley.mountain Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: Fix WMI tag for EHT rate in peer assocRamya Gnanasekar
[ Upstream commit 1a0e65750b55d2cf5de4a9bf7d6d55718784bdb7 ] Incorrect WMI tag is used for EHT rate update from host to firmware while encoding peer assoc WMI. Correct the WMI tag used for EHT rate update from WMI_TAG_HE_RATE_SET to the proper tag. This ensures firmware does not mistakenly update HE rate during parsing. Found during code review. Compile tested only. Fixes: 5b70ec6036c1 ("wifi: ath12k: add WMI support for EHT peer") Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com> Link: https://patch.msgid.link/20250409152341.944628-1-ramya.gnanasekar@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: fix cleanup path after mhi initRaj Kumar Bhagat
[ Upstream commit 6177c97fb6f05bf0473a2806e3bece7e77693209 ] Currently, the 'err_pci_msi_free' label is misplaced, causing the cleanup sequence to be incorrect. Fix this by moving the 'err_pci_msi_free' label to the correct position after 'err_irq_affinity_cleanup'. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1 Fixes: a3012f206d07 ("wifi: ath12k: set IRQ affinity to CPU0 in case of one MSI vector") Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250403-ath12k-cleanup-v1-1-ad8f67b0e9cf@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: Fix invalid memory access while forming 802.11 headerP Praneesh
[ Upstream commit be908d2360341f8bbc982fff5a5e4f8030c17f74 ] While forming the 802.11 header from the rx descriptor, skb_push() is performed for the 802.11 header length and then calls ath12k_dp_rx_desc_get_dot11_hdr(). Since skb_push() moves the skb->data pointer backwards by the 802.11 header length, the rx descriptor points to a different memory area than intended, causing invalid information to be fetched from the rx descriptor. Also, when IV and ICV are not stripped from the given MSDU, mac80211 performs PN validation for these MSDUs, which requires the crypto header. Before forming the crypto header from the given rx descriptor, skb_push() is performed for the crypto header length, which overwrites the memory pointed to by the rx descriptor, causing invalid information to form the 802.11 header. Fix these issues by moving all rx descriptor accesses before the skb_push() operation which ensures the proper 802.11 headers are generated from the given rx descriptor and removing ath12k_dp_rxdesc_get_mpdu_frame_ctrl() for filling frame control, as this information is already fetched by ath12k_dp_rx_desc_get_dot11_hdr(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Co-developed-by: Karthikeyan Periyasamy <karthikeyan.periyasamy@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <karthikeyan.periyasamy@oss.qualcomm.com> Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com> Link: https://patch.msgid.link/20250402180543.2670947-1-praneesh.p@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19wifi: ath12k: Fix memory leak during vdev_id mismatchP Praneesh
[ Upstream commit 75ec94db880b1e4b4f9182885d60db0db6e2ee56 ] Currently driver enables vdev_id check as part of the bank configuration in ath12k_dp_tx_get_vdev_bank_config(). This check ensures that the vdev_id configured in the bank register aligns with the vdev_id in the packet's address search table within the firmware. If there is a mismatch, the firmware forwards the packet with the HTT status HAL_WBM_REL_HTT_TX_COMP_STATUS_VDEVID_MISMATCH. Since driver does not handle this vdev_id mismatch HTT status, the corresponding buffers are not freed properly, causing a memory leak. Fix this issue by adding handling to free the buffers when a vdev_id mismatch HTT status is encountered. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ- Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com> Link: https://patch.msgid.link/20250402174032.2651221-1-praneesh.p@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29wifi: ath12k: Fix end offset bit definition in monitor ring descriptorP Praneesh
[ Upstream commit 6788a666000d600bd8f2e9f991cad9cc805e7f01 ] End offset for the monitor destination ring descriptor is defined as 16 bits, while the firmware definition specifies only 12 bits. The remaining bits (bit 12 to bit 15) are reserved and may contain junk values, leading to invalid information retrieval. Fix this issue by updating the correct genmask values. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Link: https://patch.msgid.link/20241223060132.3506372-8-quic_ppranees@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29wifi: ath12k: Fetch regdb.bin file from board-2.binAaradhana Sahu
[ Upstream commit 24f587572acf7509127dbdfcbf1b681ef84eeba0 ] Currently, ath12k_core_fetch_regdb() finds regdb.bin file through board id's but in board-2.bin file regdb.bin file is present with default board id because of which regdb.bin is not fetched. Add support to fetch regdb.bin file from board-2.bin through default board id. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Reviewed-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20250116032835.118397-1-quic_aarasahu@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29wifi: ath12k: fix ath12k_hal_tx_cmd_ext_desc_setup() info1 overrideNicolas Escande
[ Upstream commit df11edfba49e5fb69f4c9e7cb76082b89c417f78 ] Since inception there is an obvious typo laying around in ath12k_hal_tx_cmd_ext_desc_setup(). Instead of initializing + adding flags to tcl_ext_cmd->info1, we initialize + override. This will be needed in the future to make broadcast frames work with ethernet encapsulation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250127071306.1454699-1-nico.escande@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29wifi: ath12k: Avoid napi_sync() before napi_enable()Avula Sri Charan
[ Upstream commit 268c73d470a5790a492a2fc2ded084b909d144f3 ] In case of MHI error a reset work will be queued which will try napi_disable() after napi_synchronize(). As the napi will be only enabled after qmi_firmware_ready event, trying napi_synchronize() before napi_enable() will result in indefinite sleep in case of a firmware crash in QMI init sequence. To avoid this, introduce napi_enabled flag to check if napi is enabled or not before calling napi_synchronize(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Avula Sri Charan <quic_asrichar@quicinc.com> Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250124090058.3194299-1-quic_tamizhr@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29wifi: ath12k: fix the ampdu id fetch in the HAL_RX_MPDU_START TLVP Praneesh
[ Upstream commit dff4f278ee1ef12d822b7ed2a1048d27037209bb ] Currently, ampdu id is update with peer id mask which is incorrect. Therefore, update the ampdu id with PPDU id mask value. Also move the ampdu_id field inside the user stats since it is a user id based statistics. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-7-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29wifi: ath12k: Improve BSS discovery with hidden SSID in 6 GHz bandRamasamy Kaliappan
[ Upstream commit 27d38bdfd416f4db70e09c3bef3b030c86fd235a ] Currently, sometimes, the station is unable to identify the configured AP SSID in its scan results when the AP is not broadcasting its name publicly and has a hidden SSID. Currently, channel dwell time for an ath12k station is 30 ms. Sometimes, station can send broadcast probe request to AP close to the end of dwell time. In some of these cases, before AP sends a response to the received probe request, the dwell time on the station side would come to an end. So, the station will move to scan next channel and will not be able to acknowledge the unicast probe response. Resolve this issue by increasing station's channel dwell time to 70 ms, so that the it remains on the same channel for a longer period. This would increase the station's chance of receiving probe response from the AP. The station will then send a response acknowledgment back to the AP, thus leading to successful scan and BSS discovery. With an increased dwell time, scan would take longer than it takes now. But, this fix is an improvement for hidden SSID scan issue. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250207060005.153835-1-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29wifi: ath12k: Report proper tx completion status to mac80211Vinith Kumar R
[ Upstream commit d2d9c9b8de725e1006d3aa3d18678a732f5d3584 ] Currently Tx completion for few exception packets are received from firmware and the tx status updated to mac80211. The tx status values of HAL_WBM_REL_HTT_TX_COMP_STATUS_DROP and HAL_WBM_REL_HTT_TX_COMP_STATUS_TTL are considered as tx failure and reported as tx failure to mac80211. But these failure status is due to internal firmware tx drop and these packets were not tried to transmit in the air. In case of mesh this invalid tx status report might trigger mpath broken issue due to increase in mpath fail average. So do not report these tx status as tx failure instead free the skb by calling ieee80211_free_txskb(), and that will be accounted as dropped frame. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com> Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241122173432.2064858-1-quic_tamizhr@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-25wifi: ath12k: Fix invalid entry fetch in ath12k_dp_mon_srng_processP Praneesh
commit 63fdc4509bcf483e79548de6bc08bf3c8e504bb3 upstream. Currently, ath12k_dp_mon_srng_process uses ath12k_hal_srng_src_get_next_entry to fetch the next entry from the destination ring. This is incorrect because ath12k_hal_srng_src_get_next_entry is intended for source rings, not destination rings. This leads to invalid entry fetches, causing potential data corruption or crashes due to accessing incorrect memory locations. This happens because the source ring and destination ring have different handling mechanisms and using the wrong function results in incorrect pointer arithmetic and ring management. To fix this issue, replace the call to ath12k_hal_srng_src_get_next_entry with ath12k_hal_srng_dst_get_next_entry in ath12k_dp_mon_srng_process. This ensures that the correct function is used for fetching entries from the destination ring, preventing invalid memory accesses. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Link: https://patch.msgid.link/20241223060132.3506372-7-quic_ppranees@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-25Revert "wifi: ath12k: Fix invalid entry fetch in ath12k_dp_mon_srng_process"Alexander Tsoy
This reverts commit 535b666118f6ddeae90a480a146c061796d37022 which is commit 63fdc4509bcf483e79548de6bc08bf3c8e504bb3 upstream as it was backported incorrectly. A subsequent commit will re-backport the original patch. Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-20wifi: ath12k: Fix invalid data access in ath12k_dp_rx_h_undecap_nwifiManish Dharanenthiran
[ Upstream commit 9a0dddfb30f120db3851627935851d262e4e7acb ] In certain cases, hardware might provide packets with a length greater than the maximum native Wi-Fi header length. This can lead to accessing and modifying fields in the header within the ath12k_dp_rx_h_undecap_nwifi function for DP_RX_DECAP_TYPE_NATIVE_WIFI decap type and potentially resulting in invalid data access and memory corruption. Add a sanity check before processing the SKB to prevent invalid data access in the undecap native Wi-Fi function for the DP_RX_DECAP_TYPE_NATIVE_WIFI decap type. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manish Dharanenthiran <quic_mdharane@quicinc.com> Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com> Link: https://patch.msgid.link/20250211090302.4105141-1-tamizh.raja@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20wifi: ath12k: Fix invalid entry fetch in ath12k_dp_mon_srng_processP Praneesh
[ Upstream commit 63fdc4509bcf483e79548de6bc08bf3c8e504bb3 ] Currently, ath12k_dp_mon_srng_process uses ath12k_hal_srng_src_get_next_entry to fetch the next entry from the destination ring. This is incorrect because ath12k_hal_srng_src_get_next_entry is intended for source rings, not destination rings. This leads to invalid entry fetches, causing potential data corruption or crashes due to accessing incorrect memory locations. This happens because the source ring and destination ring have different handling mechanisms and using the wrong function results in incorrect pointer arithmetic and ring management. To fix this issue, replace the call to ath12k_hal_srng_src_get_next_entry with ath12k_hal_srng_dst_get_next_entry in ath12k_dp_mon_srng_process. This ensures that the correct function is used for fetching entries from the destination ring, preventing invalid memory accesses. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Link: https://patch.msgid.link/20241223060132.3506372-7-quic_ppranees@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-20wifi: ath12k: fix memory leak in ath12k_pci_remove()Miaoqing Pan
[ Upstream commit 1b24394ed5c8a8d8f7b9e3aa9044c31495d46f2e ] Kmemleak reported this error: unreferenced object 0xffff1c165cec3060 (size 32): comm "insmod", pid 560, jiffies 4296964570 (age 235.596s) backtrace: [<000000005434db68>] __kmem_cache_alloc_node+0x1f4/0x2c0 [<000000001203b155>] kmalloc_trace+0x40/0x88 [<0000000028adc9c8>] _request_firmware+0xb8/0x608 [<00000000cad1aef7>] firmware_request_nowarn+0x50/0x80 [<000000005011a682>] local_pci_probe+0x48/0xd0 [<00000000077cd295>] pci_device_probe+0xb4/0x200 [<0000000087184c94>] really_probe+0x150/0x2c0 The firmware memory was allocated in ath12k_pci_probe(), but not freed in ath12k_pci_remove() in case ATH12K_FLAG_QMI_FAIL bit is set. So call ath12k_fw_unmap() to free the memory. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.2.0-02280-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250123080226.1116479-1-quic_miaoqing@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21wifi: ath12k: fix handling of 6 GHz rulesAditya Kumar Singh
commit 64a1ba4072b34af1b76bf15fca5c2075b8cc4d64 upstream. In the US country code, to avoid including 6 GHz rules in the 5 GHz rules list, the number of 5 GHz rules is set to a default constant value of 4 (REG_US_5G_NUM_REG_RULES). However, if there are more than 4 valid 5 GHz rules, the current logic will bypass the legitimate 6 GHz rules. For example, if there are 5 valid 5 GHz rules and 1 valid 6 GHz rule, the current logic will only consider 4 of the 5 GHz rules, treating the last valid rule as a 6 GHz rule. Consequently, the actual 6 GHz rule is never processed, leading to the eventual disabling of 6 GHz channels. To fix this issue, instead of hardcoding the value to 4, use a helper function to determine the number of 6 GHz rules present in the 5 GHz rules list and ignore only those rules. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Cc: stable@vger.kernel.org Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250123-fix_6ghz_rules_handling-v1-1-d734bfa58ff4@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-08wifi: ath12k: fix tx power, max reg power update to firmwareSathishkumar Muruganandam
[ Upstream commit 3540bba855b4b422e8b977d11aa8173ccb4f089d ] Currently, when the vdev start WMI cmd is sent from host, vdev related parameters such as max_reg_power, max_power, and max_antenna_gain are multiplied by 2 before being sent to the firmware. This is incorrect because the firmware uses 1 dBm steps for power calculations. This leads to incorrect power values being used in the firmware and radio, potentially causing incorrect behavior. Fix the update of max_reg_power, max_power, and max_antenna_gain values in the ath12k_mac_vdev_start_restart function, ensuring accurate power settings in the firmware by sending these values as-is, without multiplication. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by: Santhosh Ramesh <quic_santrame@quicinc.com> Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240909073049.3423035-1-quic_santrame@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14wifi: ath12k: fix atomic calls in ath12k_mac_op_set_bitrate_mask()Kalle Valo
[ Upstream commit 8fac3266c68a8e647240b8ac8d0b82f1821edf85 ] When I try to manually set bitrates: iw wlan0 set bitrates legacy-2.4 1 I get sleeping from invalid context error, see below. Fix that by switching to use recently introduced ieee80211_iterate_stations_mtx(). Do note that WCN6855 firmware is still crashing, I'm not sure if that firmware even supports bitrate WMI commands and should we consider disabling ath12k_mac_op_set_bitrate_mask() for WCN6855? But that's for another patch. BUG: sleeping function called from invalid context at drivers/net/wireless/ath/ath12k/wmi.c:420 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 2236, name: iw preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 3 locks held by iw/2236: #0: ffffffffabc6f1d8 (cb_lock){++++}-{3:3}, at: genl_rcv+0x14/0x40 #1: ffff888138410810 (&rdev->wiphy.mtx){+.+.}-{3:3}, at: nl80211_pre_doit+0x54d/0x800 [cfg80211] #2: ffffffffab2cfaa0 (rcu_read_lock){....}-{1:2}, at: ieee80211_iterate_stations_atomic+0x2f/0x200 [mac80211] CPU: 3 UID: 0 PID: 2236 Comm: iw Not tainted 6.11.0-rc7-wt-ath+ #1772 Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 Call Trace: <TASK> dump_stack_lvl+0xa4/0xe0 dump_stack+0x10/0x20 __might_resched+0x363/0x5a0 ? __alloc_skb+0x165/0x340 __might_sleep+0xad/0x160 ath12k_wmi_cmd_send+0xb1/0x3d0 [ath12k] ? ath12k_wmi_init_wcn7850+0xa40/0xa40 [ath12k] ? __netdev_alloc_skb+0x45/0x7b0 ? __asan_memset+0x39/0x40 ? ath12k_wmi_alloc_skb+0xf0/0x150 [ath12k] ? reacquire_held_locks+0x4d0/0x4d0 ath12k_wmi_set_peer_param+0x340/0x5b0 [ath12k] ath12k_mac_disable_peer_fixed_rate+0xa3/0x110 [ath12k] ? ath12k_mac_vdev_stop+0x4f0/0x4f0 [ath12k] ieee80211_iterate_stations_atomic+0xd4/0x200 [mac80211] ath12k_mac_op_set_bitrate_mask+0x5d2/0x1080 [ath12k] ? ath12k_mac_vif_chan+0x320/0x320 [ath12k] drv_set_bitrate_mask+0x267/0x470 [mac80211] ieee80211_set_bitrate_mask+0x4cc/0x8a0 [mac80211] ? __this_cpu_preempt_check+0x13/0x20 nl80211_set_tx_bitrate_mask+0x2bc/0x530 [cfg80211] ? nl80211_parse_tx_bitrate_mask+0x2320/0x2320 [cfg80211] ? trace_contention_end+0xef/0x140 ? rtnl_unlock+0x9/0x10 ? nl80211_pre_doit+0x557/0x800 [cfg80211] genl_family_rcv_msg_doit+0x1f0/0x2e0 ? genl_family_rcv_msg_attrs_parse.isra.0+0x250/0x250 ? ns_capable+0x57/0xd0 genl_family_rcv_msg+0x34c/0x600 ? genl_family_rcv_msg_dumpit+0x310/0x310 ? __lock_acquire+0xc62/0x1de0 ? he_set_mcs_mask.isra.0+0x8d0/0x8d0 [cfg80211] ? nl80211_parse_tx_bitrate_mask+0x2320/0x2320 [cfg80211] ? cfg80211_external_auth_request+0x690/0x690 [cfg80211] genl_rcv_msg+0xa0/0x130 netlink_rcv_skb+0x14c/0x400 ? genl_family_rcv_msg+0x600/0x600 ? netlink_ack+0xd70/0xd70 ? rwsem_optimistic_spin+0x4f0/0x4f0 ? genl_rcv+0x14/0x40 ? down_read_killable+0x580/0x580 ? netlink_deliver_tap+0x13e/0x350 ? __this_cpu_preempt_check+0x13/0x20 genl_rcv+0x23/0x40 netlink_unicast+0x45e/0x790 ? netlink_attachskb+0x7f0/0x7f0 netlink_sendmsg+0x7eb/0xdb0 ? netlink_unicast+0x790/0x790 ? __this_cpu_preempt_check+0x13/0x20 ? selinux_socket_sendmsg+0x31/0x40 ? netlink_unicast+0x790/0x790 __sock_sendmsg+0xc9/0x160 ____sys_sendmsg+0x620/0x990 ? kernel_sendmsg+0x30/0x30 ? __copy_msghdr+0x410/0x410 ? __kasan_check_read+0x11/0x20 ? mark_lock+0xe6/0x1470 ___sys_sendmsg+0xe9/0x170 ? copy_msghdr_from_user+0x120/0x120 ? __lock_acquire+0xc62/0x1de0 ? do_fault_around+0x2c6/0x4e0 ? do_user_addr_fault+0x8c1/0xde0 ? reacquire_held_locks+0x220/0x4d0 ? do_user_addr_fault+0x8c1/0xde0 ? __kasan_check_read+0x11/0x20 ? __fdget+0x4e/0x1d0 ? sockfd_lookup_light+0x1a/0x170 __sys_sendmsg+0xd2/0x180 ? __sys_sendmsg_sock+0x20/0x20 ? reacquire_held_locks+0x4d0/0x4d0 ? debug_smp_processor_id+0x17/0x20 __x64_sys_sendmsg+0x72/0xb0 ? lockdep_hardirqs_on+0x7d/0x100 x64_sys_call+0x894/0x9f0 do_syscall_64+0x64/0x130 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f230fe04807 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RSP: 002b:00007ffe996a7ea8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000556f9f9c3390 RCX: 00007f230fe04807 RDX: 0000000000000000 RSI: 00007ffe996a7ee0 RDI: 0000000000000003 RBP: 0000556f9f9c88c0 R08: 0000000000000002 R09: 0000000000000000 R10: 0000556f965ca190 R11: 0000000000000246 R12: 0000556f9f9c8780 R13: 00007ffe996a7ee0 R14: 0000556f9f9c87d0 R15: 0000556f9f9c88c0 </TASK> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241007165932.78081-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05wifi: ath12k: fix crash when unbindingJose Ignacio Tornos Martinez
commit 1304446f67863385dc4c914b6e0194f6664ee764 upstream. If there is an error during some initialization related to firmware, the function ath12k_dp_cc_cleanup is called to release resources. However this is released again when the device is unbinded (ath12k_pci), and we get: BUG: kernel NULL pointer dereference, address: 0000000000000020 at RIP: 0010:ath12k_dp_cc_cleanup.part.0+0xb6/0x500 [ath12k] Call Trace: ath12k_dp_cc_cleanup ath12k_dp_free ath12k_core_deinit ath12k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set to NULL the released structure in ath12k_dp_cc_cleanup at the end. cc: stable@vger.kernel.org Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Link: https://patch.msgid.link/20241017181004.199589-2-jtornosm@redhat.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-05wifi: ath12k: fix warning when unbindingJose Ignacio Tornos Martinez
commit ca68ce0d9f4bcd032fd1334441175ae399642a06 upstream. If there is an error during some initialization related to firmware, the buffers dp->tx_ring[i].tx_status are released. However this is released again when the device is unbinded (ath12k_pci), and we get: WARNING: CPU: 0 PID: 2098 at mm/slub.c:4689 free_large_kmalloc+0x4d/0x80 Call Trace: free_large_kmalloc ath12k_dp_free ath12k_core_deinit ath12k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set the buffers to NULL after releasing in order to avoid the double free. cc: stable@vger.kernel.org Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Link: https://patch.msgid.link/20241017181004.199589-3-jtornosm@redhat.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-05wifi: ath12k: fix one more memcpy size errorArnd Bergmann
[ Upstream commit 19c23eb61fa4c802e6e0aaf74d6f7dcbe99f0ba3 ] A previous patch addressed a fortified-memcpy warning on older compilers, but there is still a warning on gcc-14 in some configurations: In file included from include/linux/string.h:390, from drivers/net/wireless/ath/ath12k/wow.c:7: drivers/net/wireless/ath/ath12k/wow.c: In function 'ath12k_wow_convert_8023_to_80211.isra': include/linux/fortify-string.h:114:33: error: '__builtin_memcpy' accessing 18446744073709551610 or more bytes at offsets 0 and 0 overlaps 9223372036854775797 bytes at offset -9223372036854775803 [-Werror=restrict] include/linux/fortify-string.h:679:26: note: in expansion of macro '__fortify_memcpy_chk' 679 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \ | ^~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath12k/wow.c:199:25: note: in expansion of macro 'memcpy' 199 | memcpy(pat + a3_ofs - pkt_ofs, | ^~~~~~ Address this the same way as the other two, using size_add(). Fixes: b49991d83bba ("wifi: ath12k: fix build vs old compiler") Fixes: 4a3c212eee0e ("wifi: ath12k: add basic WoW functionalities") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241004095420.637091-1-arnd@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05wifi: ath12k: fix use-after-free in ath12k_dp_cc_cleanup()Rameshkumar Sundaram
[ Upstream commit bdb281103373fd80eb5c91cede1e115ba270b4e9 ] During ath12k module removal, in ath12k_core_deinit(), ath12k_mac_destroy() un-registers ah->hw from mac80211 and frees the ah->hw as well as all the ar's in it. After this ath12k_core_soc_destroy()-> ath12k_dp_free()-> ath12k_dp_cc_cleanup() tries to access one of the freed ar's from pending skb. This is because during mac destroy, driver failed to flush few data packets, which were accessed later in ath12k_dp_cc_cleanup() and freed, but using ar from the packet led to this use-after-free. BUG: KASAN: use-after-free in ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] Write of size 4 at addr ffff888150bd3514 by task modprobe/8926 CPU: 0 UID: 0 PID: 8926 Comm: modprobe Not tainted 6.11.0-rc2-wt-ath+ #1746 Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 Call Trace: <TASK> dump_stack_lvl+0x7d/0xe0 print_address_description.constprop.0+0x33/0x3a0 print_report+0xb5/0x260 ? kasan_addr_to_slab+0x24/0x80 kasan_report+0xd8/0x110 ? ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] ? ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] kasan_check_range+0xf3/0x1a0 __kasan_check_write+0x14/0x20 ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] ath12k_dp_free+0x178/0x420 [ath12k] ath12k_core_stop+0x176/0x200 [ath12k] ath12k_core_deinit+0x13f/0x210 [ath12k] ath12k_pci_remove+0xad/0x1c0 [ath12k] pci_device_remove+0x9b/0x1b0 device_remove+0xbf/0x150 device_release_driver_internal+0x3c3/0x580 ? __kasan_check_read+0x11/0x20 driver_detach+0xc4/0x190 bus_remove_driver+0x130/0x2a0 driver_unregister+0x68/0x90 pci_unregister_driver+0x24/0x240 ? find_module_all+0x13e/0x1e0 ath12k_pci_exit+0x10/0x20 [ath12k] __do_sys_delete_module+0x32c/0x580 ? module_flags+0x2f0/0x2f0 ? kmem_cache_free+0xf0/0x410 ? __fput+0x56f/0xab0 ? __fput+0x56f/0xab0 ? debug_smp_processor_id+0x17/0x20 __x64_sys_delete_module+0x4f/0x70 x64_sys_call+0x522/0x9f0 do_syscall_64+0x64/0x130 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f8182c6ac8b Commit 24de1b7b231c ("wifi: ath12k: fix flush failure in recovery scenarios") added the change to decrement the pending packets count in case of recovery which make sense as ah->hw as well all ar's in it are intact during recovery, but during core deinit there is no use in decrementing packets count or waking up the empty waitq as the module is going to be removed also ar's from pending skb's can't be used and the packets should just be released back. To fix this, avoid accessing ar from skb->cb when driver is being unregistered. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: 24de1b7b231c ("wifi: ath12k: fix flush failure in recovery scenarios") Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241001092652.3134334-1-quic_ramess@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05wifi: ath12k: Skip Rx TID cleanup for self peerRamya Gnanasekar
[ Upstream commit 1a0c640ce1cdcde3eb131a0c1e70ca1ed7cf27cb ] During peer create, dp setup for the peer is done where Rx TID is updated for all the TIDs. Peer object for self peer will not go through dp setup. When core halts, dp cleanup is done for all the peers. While cleanup, rx_tid::ab is accessed which causes below stack trace for self peer. WARNING: CPU: 6 PID: 12297 at drivers/net/wireless/ath/ath12k/dp_rx.c:851 Call Trace: __warn+0x7b/0x1a0 ath12k_dp_rx_frags_cleanup+0xd2/0xe0 [ath12k] report_bug+0x10b/0x200 handle_bug+0x3f/0x70 exc_invalid_op+0x13/0x60 asm_exc_invalid_op+0x16/0x20 ath12k_dp_rx_frags_cleanup+0xd2/0xe0 [ath12k] ath12k_dp_rx_frags_cleanup+0xca/0xe0 [ath12k] ath12k_dp_rx_peer_tid_cleanup+0x39/0xa0 [ath12k] ath12k_mac_peer_cleanup_all+0x61/0x100 [ath12k] ath12k_core_halt+0x3b/0x100 [ath12k] ath12k_core_reset+0x494/0x4c0 [ath12k] sta object in peer will be updated when remote peer is created. Hence use peer::sta to detect the self peer and skip the cleanup. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240905042851.2282306-1-quic_rgnanase@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-09Merge tag 'ath-next-20240909' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath ath.git patches for v6.12 This is once again a fairly light pull request since ath12k is still working on MLO-related changes, and the other drivers are mostly in maintenance mode. ath12k * Fix a frame-larger-than warning seen with debug builds * Fix flex-array-member-not-at-end warnings ath11k * Fix flex-array-member-not-at-end warnings ath9k * Fix a syzbot-reported issue on USB-based devices
2024-09-06wifi: mac80211: handle ieee80211_radar_detected() for MLOAditya Kumar Singh
Currently DFS works under assumption there could be only one channel context in the hardware. Hence, drivers just calls the function ieee80211_radar_detected() passing the hardware structure. However, with MLO, this obviously will not work since number of channel contexts will be more than one and hence drivers would need to pass the channel information as well on which the radar is detected. Also, when radar is detected in one of the links, other link's CAC should not be cancelled. Hence, in order to support DFS with MLO, do the following changes - * Add channel context conf pointer as an argument to the function ieee80211_radar_detected(). During MLO, drivers would have to pass on which channel context conf radar is detected. Otherwise, drivers could just pass NULL. * ieee80211_radar_detected() will iterate over all channel contexts present and * if channel context conf is passed, only mark that as radar detected * if NULL is passed, then mark all channel contexts as radar detected * Then as usual, schedule the radar detected work. * In the worker, go over all the contexts again and for all such context which is marked with radar detected, cancel the ongoing CAC by calling ieee80211_dfs_cac_cancel() and then notify cfg80211 via cfg80211_radar_event(). * To cancel the CAC, pass the channel context as well where radar is detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is canceled only on the links using the provided context, leaving other links unaffected. This would also help in scenarios where there is split phy 5 GHz radio, which is capable of DFS channels in both lower and upper band. In this case, simultaneous radars can be detected. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-05wifi: ath12k: Avoid -Wflex-array-member-not-at-end warningsGustavo A. R. Silva
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. Move the conflicting declaration to the end of the structure. Notice that `struct ieee80211_chanctx_conf` is a flexible structure --a structure that contains a flexible-array member. Also, remove an unused structure. Fix the following warnings: drivers/net/wireless/ath/ath12k/core.h:290:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/ath/ath12k/dp.h:1499:24: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/ZrZEuxJihMzAaTVh@cute
2024-09-04Merge tag 'wireless-next-2024-09-04' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== pull-request: wireless-next-2024-09-04 here's a pull request to net-next tree, more info below. Please let me know if there are any problems. ==================== Conflicts: drivers/net/wireless/ath/ath12k/hw.c 38055789d151 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850") 8be12629b428 ("wifi: ath12k: restore ASPM for supported hardwares only") https://lore.kernel.org/87msldyj97.fsf@kernel.org Link: https://patch.msgid.link/20240904153205.64C11C4CEC2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-15wifi: ath12k: fix the stack frame size warning in ath12k_mac_op_hw_scanMiaoqing Pan
Fix the following W=1 kernel build warning: drivers/net/wireless/ath/ath12k/mac.c: In function ‘ath12k_mac_op_hw_scan’: drivers/net/wireless/ath/ath12k/mac.c:3806:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240809015841.2671448-1-quic_miaoqing@quicinc.com
2024-08-13Merge tag 'ath-next-20240812' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath ath.git patches for v6.12 This is a fairly light pull request since ath12k is still working on MLO-related changes, and the other drivers are mostly in maintenance mode with a few cleanups and bug fixes. Major changes: ath12k * DebugFS support for transmit DE stats * Make ASPM support hardware-dependent * Align BSS Channel information command and message with firmware ath11k * Use work queue for beacon tx events ath9k * Use devm for gpio_request_one * Use unmanaged PCI functions in ath9k_pci_owl_loader()
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 17:28:13 +0000