summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath12k/wmi.c
AgeCommit message (Collapse)Author
2025-02-03wifi: ath12k: update the latest CSA counterAditya Kumar Singh
At present, the driver configures the firmware to send the Channel Switch (CS) count event only when the count reaches zero during a Channel Switch Announcement (CSA). For frames managed by the upper layer, where the driver does not update the counter, the CS count in these frames remains unchanged throughout the entire CSA period. This is because the upper layer is not aware of the latest ongoing count. Indicating same count value throughout the CSA time is wrong and could lead to connection instabilities. Fix this by configuring firmware to send CS count event for every count and then accordingly decrementing the count in mac80211. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20250124-ath12k_mlo_csa-v2-3-420c42fcfecf@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: fix handling of CSA offsets in beacon template commandAditya Kumar Singh
The driver is informed of the counter offsets in the beacon during CSA through the ieee80211_mutable_offsets structure. According to the documentation for the cntdwn_counter_offs member, "This array can contain zero values which should be ignored." However, the current implementation uses these values unconditionally, without checking for zeros. Whenever CSA is active, these offsets are guaranteed to be set. Therefore, add a check for CSA active status before setting the CSA switch count offsets. This ensures that the offsets are only set when CSA is active, preventing incorrect configurations. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20250124-ath12k_mlo_csa-v2-2-420c42fcfecf@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: update beacon template function to use arvif structureAditya Kumar Singh
The current code has ath12k_wmi_bcn_tmpl() accepting separate ar and vdev_id parameters. However, ath12k_link_vif structure can be used to derive both of these. Hence, simplify the function signature. Later change needs arvif pointer access within the function hence it is better if arvif is directly passed now. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20250124-ath12k_mlo_csa-v2-1-420c42fcfecf@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-28Merge tag 'ath-current-20250124' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath ath.git patch for v6.14-rc Fix an issue in the ath12k driver where 6 GHz operation no longer works with new firmware.
2025-01-26wifi: ath12k: Request pdev stats from firmwareRamya Gnanasekar
Add support to request pdev stats from firmware through WMI and print the information Sample Output: ------------- cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/fw_stats/pdev_stats ath12k PDEV stats ================= Channel noise floor -85 Channel TX power 126 TX frame count 0 RX frame count 8637 RX clear count 37424 Cycle count 4372024 PHY error count 0 soc drop count 0 ath12k PDEV TX stats ==================== HTT cookies queued 0 HTT cookies disp. 0 MSDU queued 0 MPDU queued 0 MSDUs dropped 0 Local enqued 0 Local freed 0 HW queued 0 PPDUs reaped 0 Num underruns 0 PPDUs cleaned 0 MPDUs requeued 0 Excessive retries 0 HW rate 0 Sched self triggers 0 Dropped due to SW retries 0 Illegal rate phy errors 0 PDEV continuous xretry 0 TX timeout 9 PDEV resets 0 Stateless TIDs alloc failures 0 PHY underrun 0 MPDU is more than txop limit 0 ath12k PDEV RX stats ==================== Mid PPDU route change 0 Tot. number of statuses 0 Extra frags on rings 0 0 Extra frags on rings 1 0 Extra frags on rings 2 0 Extra frags on rings 3 0 MSDUs delivered to HTT 0 MPDUs delivered to HTT 0 MSDUs delivered to stack 0 MPDUs delivered to stack 0 Oversized AMSUs 0 PHY errors 0 PHY errors drops 0 MPDU errors (FCS, MIC, ENC) 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250124185330.1244585-4-ramya.gnanasekar@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-26wifi: ath12k: Request beacon stats from firmwareRamya Gnanasekar
Add support to request and dump beacon statistics from firmware Sample output: ------------- cat /sys/kernel/debug/ath12k/pci-0000:06:00.0/mac0/fw_stats/beacon_stats ath12k Beacon stats (1) =================== VDEV ID 0 VDEV MAC address 00:03:7f:04:37:58 ================ Num of beacon tx success 20 Num of beacon tx failures 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250124185330.1244585-3-ramya.gnanasekar@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-26wifi: ath12k: Request vdev stats from firmwareRamya Gnanasekar
Add support to request and print vdev stats from firmware through WMI. Sample output: ------------- cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/fw_stats/vdev_stats ath12k VDEV stats ================= VDEV ID 0 VDEV MAC address 00:03:7f:6c:9c:1a beacon snr 96 data snr 255 num rx frames 0 num rts fail 0 num rts success 0 num rx err 0 num rx discard 0 num tx not acked 0 num tx frames [00] 0 num tx frames [01] 0 num tx frames [02] 0 num tx frames [03] 2 num tx frames retries [00] 0 num tx frames retries [01] 0 num tx frames retries [02] 0 num tx frames retries [03] 0 num tx frames failures [00] 0 num tx frames failures [01] 0 num tx frames failures [02] 0 num tx frames failures [03] 0 tx rate history [00] 0x00000000 tx rate history [01] 0x00000000 tx rate history [02] 0x00000000 tx rate history [03] 0x00000000 tx rate history [04] 0x00000000 tx rate history [05] 0x00000000 tx rate history [06] 0x00000000 tx rate history [07] 0x00000000 tx rate history [08] 0x00000000 tx rate history [09] 0x00000000 beacon rssi history [00] 0 beacon rssi history [01] 0 beacon rssi history [02] 0 beacon rssi history [03] 0 beacon rssi history [04] 0 beacon rssi history [05] 0 beacon rssi history [06] 0 beacon rssi history [07] 0 beacon rssi history [08] 0 beacon rssi history [09] 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250124185330.1244585-2-ramya.gnanasekar@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-26wifi: ath12k: encode max Tx power in scan channel list commandSathishkumar Muruganandam
Currently, when sending the scan channel list command to the firmware, the maximum Tx power is not encoded in the reg2 member. This omission causes the firmware to be unaware of the host's maximum Tx power, leading to incorrect Tx power derivation at firmware level. To resolve this issue, encode the maximum Tx power in the scan channel list command before sending it to firmware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Link: https://patch.msgid.link/20250107-add_max_reg_pwr_in_scan_ch_list_cmd-v1-1-70d9963a21e4@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-26wifi: ath12k: report station mode signal strengthLingbo Kong
Currently, the signal strength of "iw dev xxx station dump" always show an invalid value. This is because signal strength is only set in ath12k_mgmt_rx_event() function, and not set for received data packet. So, change to get signal from firmware and report to mac80211. After that, "iw dev xxx station dump" show the correct signal strength. Such as: Station 00:03:7f:12:03:03 (on wlo1) inactive time: 36 ms rx bytes: 61571 rx packets: 336 tx bytes: 28204 tx packets: 205 tx retries: 49 tx failed: 0 beacon loss: 0 beacon rx: 83 rx drop misc: 66 signal: -24 dBm beacon signal avg: -22 dBm For WCN7850, the firmware supports db2dbm, so not need to add noise floor. For QCN9274, the firmware not support db2dbm, so need to add noise floor. This patch affects the station mode of WCN7850 and QCN9274. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Link: https://patch.msgid.link/20250115063537.35797-4-quic_lingbok@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-24wifi: ath12k: fix handling of 6 GHz rulesAditya Kumar Singh
In the US country code, to avoid including 6 GHz rules in the 5 GHz rules list, the number of 5 GHz rules is set to a default constant value of 4 (REG_US_5G_NUM_REG_RULES). However, if there are more than 4 valid 5 GHz rules, the current logic will bypass the legitimate 6 GHz rules. For example, if there are 5 valid 5 GHz rules and 1 valid 6 GHz rule, the current logic will only consider 4 of the 5 GHz rules, treating the last valid rule as a 6 GHz rule. Consequently, the actual 6 GHz rule is never processed, leading to the eventual disabling of 6 GHz channels. To fix this issue, instead of hardcoding the value to 4, use a helper function to determine the number of 6 GHz rules present in the 5 GHz rules list and ignore only those rules. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Cc: stable@vger.kernel.org Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250123-fix_6ghz_rules_handling-v1-1-d734bfa58ff4@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-22wifi: ath12k: add factory test mode supportAaradhana Sahu
Add support to process factory test mode commands(FTM) for calibration. By default firmware start with MISSION mode and to process the FTM commands firmware needs to be restarted in FTM mode using module parameter ftm_mode. The pre-request is all the radios should be down before starting the test. All ath12k test mode interface related commands specified in enum ath_tm_cmd. When start command ATH_TM_CMD_TESTMODE_START is received, ar state is set to test Mode and FTM daemon sends test mode command to wifi driver via cfg80211. Wifi driver sends these command to firmware as wmi events. If it is segmented commands it will be broken down into multiple segments and encoded with TLV header else it is sent to firmware as it is. Firmware response via UTF events, wifi driver creates skb and send to cfg80211, cfg80211 sends firmware response to FTM daemon via netlink message. Command to boot in ftm mode insmod ath12k ftm_mode=1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Reviewed-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20250119083657.1937557-4-quic_aarasahu@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-22wifi: ath12k: export ath12k_wmi_tlv_hdr for testmodeAaradhana Sahu
Export ath12k_wmi_tlv_hdr() to further use in the testmode command processing. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Reviewed-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20250119083657.1937557-3-quic_aarasahu@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-07wifi: ath12k: set flag for mgmt no-ack frames in Tx completionRamya Gnanasekar
IEEE80211_TX_STAT_NOACK_TRANSMITTED flag signifies that frame was successfully transmitted without any errors when no-ack is requested. In WMI Tx management completion path, driver is not setting IEEE80211_TX_STAT_NOACK_TRANSMITTED flag for the frames with IEEE80211_TX_CTL_NO_ACK. Without this flag, the management frame statistics will not track such frames. Add IEEE80211_TX_STAT_NOACK_TRANSMITTED flag as part of the flags in skb transmit information when WMI is processing Tx completion for management frames. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241219190845.605116-1-quic_msinada@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-07wifi: ath12k: handle radar detection with MLOAditya Kumar Singh
ieee80211_radar_detected() expects the driver to pass a channel context configuration during MLO. This is used to identify exactly which link detected the radar. Add support to pass this to mac80211. Since the link arvif is not known in the WMI event, introduce a helper iterator API, ath12k_mac_get_any_chanctx_conf_iter(), to get the channel context configuration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241218-ath12k_mlo_dfs-v1-3-058e783bcfc7@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-07wifi: ath12k: rename CAC_RUNNING flagAditya Kumar Singh
Rename the flag ATH12K_CAC_RUNNING to ATH12K_FLAG_CAC_RUNNING to correct the naming inconsistency in the enum ath12k_dev_flags. No functionality changes. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241218-ath12k_mlo_dfs-v1-1-058e783bcfc7@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: advertise MLO support and capabilitiesRameshkumar Sundaram
Now everything in ath12k is in place and we can enable Multi-Link Operation (MLO) in the driver. For now it's only enabled for QCN9274 with firmware having ATH12K_FW_FEATURE_MLO feature bit set. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211154358.776279-8-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: add no-op without debug print in WMI Rx eventAditya Kumar Singh
Currently, certain WMI events are frequently received by the host. Since the host lacks the logic to process these events, the console is flooded with ‘Unknown eventid:’ debug messages. To address this, handle these events gracefully without printing debug messages. There is already a block of event IDs that are ignored with a debug print. However, this new type of event occurs more frequently, so no debug print is necessary, and handling it should be a no-op. While at it, re-arrange the code so that all Unknown event IDs are towards the end of the switch block. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211154358.776279-4-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: symmetrize scan vdev creation and deletion during HW scanAditya Kumar Singh
Currently, the hardware scan is initiated in the driver on scan link (15). After mapping to the appropriate radio based on the scan frequency, the vdev is created and the scan begins. However, the vdev is only deleted when channel assignment is about to occur after the scan. Additionally, it is also deleted if a new scan is requested on the same interface but the underlying radio differs in the new request. This imbalance leads to various hardware scan issues, especially when a non-MLO and MLO combination exists. In such cases, the latter tries to skip the scan and proceed with channel assignment while the former is still scanning, causing a firmware assert. To address this issue, symmetrize the scan vdev creation and deletion during hardware scan operations. This means creating a vdev when the scan starts and deleting it once the scan is completed or aborted. While at this, add a few debug prints in scan handling and a few empty lines for better code read. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211154358.776279-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: enable MLO setup and teardown from coreKarthikeyan Periyasamy
In case of multi device group abstraction, host has to exchange the multi-link operation commands such as setup and ready to firmware before registering the device group to mac80211. The multi-link operation commands - setup, ready and teardown are necessary for many commands such as WMI_PEER_ASSOC_CMD, WMI_BCN_TMPL_CMD in case of multi-link interfaces. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211153432.775335-8-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-16wifi: ath12k: Add MLO WMI setup and teardown functionsBhagavathi Perumal S
In case of multi device group abstraction, host has to exchange the MLO commands such as setup, teardown and ready to firmware. Once multi device group is ready, host has to exchange MLO setup command with partner devices link information and followed by MLO ready command to firmware. During deinit, MLO teardown command should be sent to firmware. Firmware would send MLO setup complete and MLO teardown complete to host for MLO setup command and MLO teardown command respectively. Added WMI helper functions for the MLO setup, ready and teardown command and the handling for corresponding event from firmware. Add appropriate WMI tag, command id and event id to parse the event and send request. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241211153432.775335-7-kvalo@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-11wifi: ath12k: Off by one in ath12k_wmi_process_csa_switch_count_event()Dan Carpenter
The ahvif->vif->link_conf[] array has IEEE80211_MLD_MAX_NUM_LINKS elements so this should be >= instead of > to avoid an out of bounds access. Fixes: 3952657848c0 ("wifi: ath12k: Use mac80211 vif's link_conf instead of bss_conf") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/755becb1-819b-484d-8fac-9a2db53ced1b@stanley.mountain Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-11-25wifi: ath12k: Use mac80211 vif's link_conf instead of bss_confSriram R
Currently mac80211 vif's bss_conf is used to fetch any vif related configurations in driver but with MLO multiple links are affiliated to a vif and corresponding link configs are present in vif->link_conf[]. Fetch link_conf for corresponding link from vif and use the same for configurations. Add ath12k_mac_get_link_bss_conf() helper to fetch link_conf from arvif. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241121155806.1862733-8-kvalo@kernel.org
2024-11-06wifi: ath12k: Add MLO peer assoc command supportSriram R
Add changes to send MLO peer assoc command with partner link details and primary umac details. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-9-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: add multi-link flag in peer create commandSriram R
Driver should indicate to firmware whether a peer is multi-link or not in peer create command using multi-link flag. Add changes to support WMI_TAG_MLO_PEER_CREATE_PARAMS in WMI_PEER_CREATE_CMDID. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-7-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-06wifi: ath12k: MLO vdev bringup changesSriram R
Add changes to add the link vdevs dynamically whenever a channel is assigned from mac80211 for a link vdev. During vdev create, update ML address of the vdev to firmware using the new WMI parameter (WMI_TAG_MLO_VDEV_CREATE_PARAMS). During vdev start, notify the firmware that this link vdev is newly added and also indicate all its known partners so that the firmware can take necessary actions to internally update the partners on the new link being added. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20241101151705.165987-3-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-16wifi: ath12k: prepare vif data structure for MLO handlingSriram R
To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-09-19wifi: ath12k: make read-only array svc_id static constColin Ian King
Don't populate the read-only array svc_id on the stack at run time, instead make it static const. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240912144456.591494-1-colin.i.king@gmail.com
2024-09-06wifi: mac80211: handle ieee80211_radar_detected() for MLOAditya Kumar Singh
Currently DFS works under assumption there could be only one channel context in the hardware. Hence, drivers just calls the function ieee80211_radar_detected() passing the hardware structure. However, with MLO, this obviously will not work since number of channel contexts will be more than one and hence drivers would need to pass the channel information as well on which the radar is detected. Also, when radar is detected in one of the links, other link's CAC should not be cancelled. Hence, in order to support DFS with MLO, do the following changes - * Add channel context conf pointer as an argument to the function ieee80211_radar_detected(). During MLO, drivers would have to pass on which channel context conf radar is detected. Otherwise, drivers could just pass NULL. * ieee80211_radar_detected() will iterate over all channel contexts present and * if channel context conf is passed, only mark that as radar detected * if NULL is passed, then mark all channel contexts as radar detected * Then as usual, schedule the radar detected work. * In the worker, go over all the contexts again and for all such context which is marked with radar detected, cancel the ongoing CAC by calling ieee80211_dfs_cac_cancel() and then notify cfg80211 via cfg80211_radar_event(). * To cancel the CAC, pass the channel context as well where radar is detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is canceled only on the links using the provided context, leaving other links unaffected. This would also help in scenarios where there is split phy 5 GHz radio, which is capable of DFS channels in both lower and upper band. In this case, simultaneous radars can be detected. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-07wifi: ath12k: fix BSS chan info request WMI commandP Praneesh
Currently, the firmware returns incorrect pdev_id information in WMI_PDEV_BSS_CHAN_INFO_EVENTID, leading to incorrect filling of the pdev's survey information. To prevent this issue, when requesting BSS channel information through WMI_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, firmware expects pdev_id as one of the arguments in this WMI command. Add pdev_id to the struct wmi_pdev_bss_chan_info_req_cmd and fill it during ath12k_wmi_pdev_bss_chan_info_request(). This resolves the issue of sending the correct pdev_id in WMI_PDEV_BSS_CHAN_INFO_EVENTID. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240331183232.2158756-2-quic_kathirve@quicinc.com
2024-06-26wifi: ath12k: fix peer metadata parsingKarthikeyan Periyasamy
Currently, the Rx data path only supports parsing peer metadata of version zero. However, the QCN9274 platform configures the peer metadata version as V1B. When V1B peer metadata is parsed using the version zero logic, invalid data is populated, causing valid packets to be dropped. To address this issue, refactor the peer metadata version and add the version based parsing to populate the data from peer metadata correctly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: 287033810990 ("wifi: ath12k: add support for peer meta data version") Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240624145418.2043461-1-quic_periyasa@quicinc.com
2024-06-24wifi: ath12k: handle keepalive during WoWLAN suspend and resumeBaochen Qiang
With WoWLAN enabled and after sleeping for a rather long time, we are seeing that with some APs, it is not able to wake up the STA though the correct wake up pattern has been configured. This is because the host doesn't send keepalive command to firmware, thus firmware will not send any packet to the AP and after a specific time the AP kicks out the STA. So enable keepalive before going to suspend and disable it after resume back. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240604055407.12506-9-quic_bqiang@quicinc.com
2024-06-24wifi: ath12k: support GTK rekey offloadBaochen Qiang
Host sets GTK related info to firmware before WoW is enabled, and gets rekey replay_count and then disables GTK rekey when WoW quits. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240604055407.12506-8-quic_bqiang@quicinc.com
2024-06-24wifi: ath12k: support ARP and NS offloadBaochen Qiang
Support ARP and NS offload in WoW state. Tested this way: put machine A with QCA6390 to WoW state, ping/ping6 machine A from another machine B, check sniffer to see any ARP response and Neighbor Advertisement from machine A. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240604055407.12506-7-quic_bqiang@quicinc.com
2024-06-24wifi: ath12k: implement hardware data filterBaochen Qiang
Host needs to set hardware data filter before entering WoW to let firmware drop needless broadcast/multicast frames to avoid frequent wakeup. Host clears hardware data filter when leaving WoW. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240604055407.12506-6-quic_bqiang@quicinc.com
2024-06-24wifi: ath12k: add WoW net-detect functionalityBaochen Qiang
Implement net-detect feature by setting flag WIPHY_WOWLAN_NET_DETECT if firmware supports this feature. Driver sets the related PNO configuration to firmware before entering WoW and firmware then scans periodically and wakes up host if a specific SSID is found. Note that firmware crashes if we enable it for both P2P vdev and station vdev simultaneously because firmware can only support one vdev at a time. Since there is rare scenario for a P2P vdev to do net-detect, skip it for P2P vdevs. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240604055407.12506-5-quic_bqiang@quicinc.com
2024-06-24wifi: ath12k: add basic WoW functionalitiesBaochen Qiang
Implement basic WoW functionalities such as magic-packet, disconnect and pattern. The logic is very similar to ath11k. When WoW is configured, ath12k_core_suspend and ath12k_core_resume are skipped (by checking ar->state) as we are not allowed to power cycle firmware. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240604055407.12506-4-quic_bqiang@quicinc.com
2024-06-24wifi: ath12k: implement WoW enable and wakeup commandsBaochen Qiang
Implement WoW enable and WoW wakeup commands which are needed for suspend/resume. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240604055407.12506-3-quic_bqiang@quicinc.com
2024-06-03wifi: ath12k: add hw_link_id in ath12k_pdevKarthikeyan Periyasamy
Currently, hw_link_id is sent in WMI service ready event but it is not parsed anywhere. But, in future, for multi-link operation, this parameter would be needed by many WMI commands such as WMI beacon template (WMI_BCN_TMPL_CMDID), WMI vdev start for Multi-link virtual AP interfaces (WMI_VDEV_START_REQUEST_CMDID), WMI peer assoc command (WMI_PEER_ASSOC_CMDID) for Multi-link peer and so on. Hence, add changes to parse and store the hw_link_id received in WMI service ready event in ath12k_pdev structure. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240529054955.4105240-1-quic_hprem@quicinc.com
2024-05-16wifi: ath12k: add EMA beacon supportAloka Dixit
Add new function ath12k_mac_setup_bcn_tmpl_ema() which retrieves a list of EMA (Enhanced Multi-BSSID Advertisements) beacon templates from mac80211 and sends all to firmware. Add support to send EMA configurations to firmware by adding a new parameter 'ema_params' in struct wmi_bcn_tmpl_cmd. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-9-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: add MBSSID beacon supportAloka Dixit
- A single beacon template is used for one multiple BSSID group as only one interface from group transmits the beacons. But firmware requires the host to send this template each time a nontransmitted interface is brought up. Hence, modify existing logic to retrieve the template from vif context of the transmitting interface. Also, firmware crashes if host sends a template for a nontransmitted interface which is already up, add a check to avoid this. - Set rsnie_present and wpaie_present fields for nontransmitted VAPs. - Send offset to the multiple BSSID element in the beacon template firmware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-8-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: configure MBSSID parameters in AP modeAloka Dixit
Include MBSSID parameters in WMI vdev up operation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-6-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: create a structure for WMI vdev up parametersAloka Dixit
Host needs to send multiple BSSID configurations to firmware for each vdev in ath12k_wmi_vdev_up() for AP mode. This function accepts individual input parameters hence any new argument will require changes to all callers. Most of these will use default value (0 or NULL). Create a structure for the function arguments and include objects with all members initialized to zero to minimize future changes. Tested-on : QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-5-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: configure MBSSID params in vdev create/startAloka Dixit
Configure multiple BSSID flags and vdev_id of the transmited profile in vdev create/start commands depending on the service bit WMI_TLV_SERVICE_MBSS_PARAM_IN_VDEV_START_SUPPORT. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-3-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: advertise driver capabilities for MBSSID and EMAAloka Dixit
Advertise the driver support for multiple BSSID (MBSSID) and enhanced multi-BSSID advertisements (EMA) by setting extended capabilities. Configure mbssid_max_interfaces and ema_max_profile_periodicity fields in structure wiphy which are used to advertise maximum number of interfaces and profile periodicity supported by the driver. Add new WMI fields to configure maximum vdev count supported for MBSSID and profile periodicity in case of EMA. Set WMI_RSRC_CFG_FLAGS2_CALC_NEXT_DTIM_COUNT_SET flag to allow firmware to track and update the DTIM counts for each nontransmitted profile. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508202912.11902-2-quic_alokad@quicinc.com
2024-05-16wifi: ath12k: Correct 6 GHz frequency value in rx statusPradeep Kumar Chitrapu
The frequency in the rx status is currently being filled incorrectly for the 6 GHz band. The channel number received is invalid in this case, resulting in packet drops. Fix this issue by correcting the frequency calculation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508173655.22191-3-quic_pradeepc@quicinc.com
2024-05-13wifi: ath12k: fix misspelling of "dma" in num_rxmda_per_pdevJeff Johnson
The ath12k_hw_params member num_rxmda_per_pdev contains a misspelling of "dma" so fix it. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240504-ath12k_dp_rxdma_ring_sel_config_wcn7850-ret-v1-1-44d2843a2857@quicinc.com
2024-05-13wifi: ath12k: avoid double SW2HW_MACID conversionKarthikeyan Periyasamy
Currently, ath12k_wmi_pdev_dma_ring_cfg() fails due to an invalid pdev_id parameter passed to the WMI_PDEV_DMA_RING_CFG_REQ_CMDID WMI command. This invalid pdev_id is caused by a double conversion of the MAC ID. Since the the caller of ath12k_wmi_pdev_dma_ring_cfg() already performs the MAC ID conversion, it is unnecessary to do it again within the function. To fix this, remove the software (SW) to hardware (HW) MAC ID conversion from ath12k_wmi_pdev_dma_ring_cfg() to avoid this redundant conversion. Found in code review. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240506173017.597715-1-quic_periyasa@quicinc.com
2024-04-24wifi: ath12k: add support to handle beacon miss for WCN7850Kang Yang
When AP goes down or too far away without indication to STA, beacon miss will be detected. Then for WCN7850's firmware, it will use roam event to send beacon miss to host. If STA doesn't handle the beacon miss, will keep the fake connection and unable to roam. So add support for WCN7850 to trigger disconnection from AP when receiving this event from firmware. It has to be noted that beacon miss event notification for QCN9274 to be handled in a separate patch as it uses STA kickout WMI event to notify beacon miss and the current STA kickout event is processed as low_ack. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Reviewed-by: Nicolas Escande <nico.escande@gmail.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240412094447.2063-1-quic_kangyang@quicinc.com
2024-04-23wifi: ath12k: ACPI SAR supportLingbo Kong
In order to enable ACPI SAR (Specific Absorption Rate), ath12k gets SAR and GEO offset tables from ACPI and sends the data to firmware using WMI_PDEV_SET_BIOS_SAR_TABLE_CMDID and WMI_PDEV_SET_BIOS_GEO_TABLE_CMDID commands. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240422033054.979-3-quic_lingbok@quicinc.com
2024-04-23wifi: ath12k: ACPI TAS supportLingbo Kong
Currently, ath12k does not support Time-Average-SAR (TAS). In order to enable TAS read the tables from ACPI and send them to the firmware using WMI_PDEV_SET_BIOS_INTERFACE_CMDID command. Besides, ath12k registers an ACPI event callback so that ACPI can notify ath12k to get the updated SAR power table and sends it to the firmware when the device state is changed. ACPI is only enabled for WCN7850 using struct ath12k_hw_params::acpi_guid field. Most likely QCN9274 will never support ACPI as the chip is not used in laptops. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240422033054.979-2-quic_lingbok@quicinc.com