summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath11k
AgeCommit message (Collapse)Author
2020-08-17ath11k: do not depend on ARCH_QCOM for ath11kCarl Huang
With only IPQ8074 supported ath11k was only usable on Qualcomm architectures. But now that we are adding QCA6390 PCI support to ath11k that's not the case anymore and it can be used on any architecture supporting PCI. So remove the dependency on ARCH_QCOM. After that there is also no need to depend on COMPILE_TEST. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597309466-19688-2-git-send-email-kvalo@codeaurora.org
2020-07-31cfg80211: invert HE BSS color 'disabled' to 'enabled'Johannes Berg
This is in fact 'disabled' in the spec, but there it's in a place where that actually makes sense. In our internal data structures, it doesn't really make sense, and in fact the previous commit just fixed a bug in that area. Make this safer by inverting the polarity from 'disabled' to 'enabled'. Link: https://lore.kernel.org/r/20200730130051.5d8399545bd9.Ie62fdcd1a6cd9c969315bc124084a494ca6c8df3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-06-23ath11k: remove define ATH11K_QMI_DEFAULT_CAL_FILE_NAMEKalle Valo
It's just a duplicate of ATH11K_DEFAULT_CAL_FILE. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592316055-24958-13-git-send-email-kvalo@codeaurora.org
2020-06-23ath11k: don't use defines in hw_paramsKalle Valo
These defines are not used anywhere else so to avoid extra indirection add the values directly to hw_params. No functional changes. Compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592316055-24958-12-git-send-email-kvalo@codeaurora.org
2020-06-23ath11k: qmi: cleanup info messagesKalle Valo
Use simplified format, just like ath10k uses, which is easier to read. Compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592316055-24958-11-git-send-email-kvalo@codeaurora.org
2020-06-23ath11k: remove useless info messagesKalle Valo
ath11k should not be spamming these to the logs. If these are important they should be debug messages, but I just remove them for now. Compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592316055-24958-10-git-send-email-kvalo@codeaurora.org
2020-06-23ath11k: change ath11k_core_fetch_board_data_api_n() to use ↵Kalle Valo
ath11k_core_create_firmware_path() Use the helper added in previous comment to create the full path, instead of doing it manually. No functional changes. Compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592316055-24958-9-git-send-email-kvalo@codeaurora.org
2020-06-23ath11k: don't use defines for hw specific firmware directoriesKalle Valo
The downside of using defines in struct ath11k_hw_params.fw.dir is that it's easy to get it wrong as the full path is not visible. So drop the use of defines and instead create the patch runtime using a static inline function ath11k_core_create_firmware_path(). Hopefully this reduces the chances of using incorrect firmware path. No functional changes. Compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592316055-24958-8-git-send-email-kvalo@codeaurora.org
2020-06-23ath11k: create a common function to request all firmware filesKalle Valo
To avoid duplicating the logic how the full firmware path is created create a common function ath11k_core_firmware_request() and convert also qmi.c to use it. Also remove a useless info print, it's more like a debug message anyway. No functional changes. Compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592316055-24958-7-git-send-email-kvalo@codeaurora.org
2020-06-23ath11k: Add bdf-addr in hw_paramsAnilkumar Kolli
bdf-addr is different for IPQ8074 and IPQ6018 so add it to hw_params. No functional changes. Compile tested only. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592316055-24958-6-git-send-email-kvalo@codeaurora.org
2020-06-23ath11k: add hw_ops for pdev id to hw_mac mappingAnilkumar Kolli
pdev_id to hw_mac is different for ipq8074 and ipq6018 Below table has the mapping pdev_id ipq8074 ipq6018 ------- ------- ------- 0 0 0 1 2 1 2 1 Not applicable No functional changes. Compile tested only. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592316055-24958-5-git-send-email-kvalo@codeaurora.org
2020-06-23ath11k: define max_radios in hw_paramsAnilkumar Kolli
IPQ6018 needs different value for max_radios so make it configurable via hw_params. No functional changes. Compile tested only. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592316055-24958-4-git-send-email-kvalo@codeaurora.org
2020-06-23ath11k: convert ath11k_hw_params to an arrayAnilkumar Kolli
Convert to ath11k_hw_params to an array to make it possible add new hardware in the future, for example IPQ6018 or QCA6390. No functional changes. Compile tested only. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592316055-24958-3-git-send-email-kvalo@codeaurora.org
2020-06-23ath11k: ahb: call ath11k_core_init() before irq configurationAnilkumar Kolli
This is needed to init .max_radios in hw_params and onfigure external interrupts for available pdev_ids. Compile tested only. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1592316055-24958-2-git-send-email-kvalo@codeaurora.org
2020-06-16ath11k: rename default board fileAnilkumar Kolli
Rename default BDF to make it consistent with board-2.bin naming. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591709581-18039-4-git-send-email-akolli@codeaurora.org
2020-06-16ath11k: update firmware files read pathAnilkumar Kolli
We need this so that all hardware versions can coexist and it's easier to manage everything then all hardware directories are under ath11k directory. Copy ath11k firmware files to /lib/firmware/ath11k/IPQ8074/hw2.0/ Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591709581-18039-3-git-send-email-akolli@codeaurora.org
2020-06-15Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.9. Major changes: ath11k * add 6G band support * add spectral scan support
2020-06-15ath11k: fix wmi peer flags in peer assoc commandVenkateswara Naralasetty
Currently need ptk/gtk wmi peer flags in wmi peer assoc cmd are set based on the rsnie and wpaie of the bss from the bss list. Since this bss list is not updated with current BSSID for AP mode, we may not find bss from the bss list. Which results in ptk/gtk peer flags are not set in the wmi peer assoc cmd. Due to this EAPOL frames are going in data rates instead of management rates. Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591771841-25503-1-git-send-email-vnaralas@codeaurora.org
2020-06-15ath11k: Add support for ring backpressure statsSriram R
Add support for collecting and dumping the ring backpressure stats via debugfs. Stats are dumped only if events are received for the specific ring. Below command can be used to obtain these stats as part of soc dp stats. cat /sys/kernel/debug/ath11k/ipq8074/soc_dp_stats Sample Output - When No stats available: Backpressure Stats ================== No Ring Backpressure stats received Sample Output - When ring bp stats available for specific ring Backpressure Stats ================== Ring: REO2SW1_RING count: 1 hp: 2 tp: 2 seen before: 4ms Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01213-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591768308-32005-3-git-send-email-srirrama@codeaurora.org
2020-06-15ath11k: Add dp tx err statsSriram R
Add support for dp tx error stats which logs tx failure reasons due to ring full condition, etc. This stats is added in soc_dp_stats which was earlier used as soc_rx_stats so that all dp related info are logged in same file. Below is an example usage, root@OpenWrt:/# cat /sys/kernel/debug/ath11k/ipq8074/soc_dp_stats SOC RX STATS: err ring pkts: 0 Invalid RBM: 0 <snip> SOC TX STATS: Ring Full Failures: ring0: 4 ring1: 3 ring2: 5 Misc Transmit Failures: 2 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01213-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591768308-32005-2-git-send-email-srirrama@codeaurora.org
2020-06-15ath11k: removing redundant reo unlock followed by immediate lockSowmiya Sree Elavalagan
Removed reo cmd lock and unlock which was acquiring the lock immediately after unlock. Done for code clean up. Signed-off-by: Sowmiya Sree Elavalagan <ssreeela@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591713432-26426-1-git-send-email-ssreeela@codeaurora.org
2020-06-15ath11k: add support for spectral scanKarthikeyan Periyasamy
spectral scan control interface is exposed through debugfs eentry. Relayfs is used to collect the spectral data. These interfaces are similar to ath10k spectral. spectral debugfs interfaces are below, echo background > /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan_ctl echo trigger > /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan_ctl iw dev wlan0 scan echo disable > /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan_ctl cat /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan0 > fft_samples.dump Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591688014-26441-2-git-send-email-periyasa@codeaurora.org
2020-06-15ath11k: Add direct buffer ring supportKarthikeyan Periyasamy
Add direct buffer ring (dbring) with helper API, which is used by the spectral scan. Initialise the direct buffer ring based on the dma ring capability, which get announced in the wmi service ready extended event. This ring is slightly changed from data path rings. Compare to data path ring this ring shares the hp and tp address to firmware though WMI commands. Also the replenish buffer size is derived from firmware announcement. driver receive indication through WMI event WMI_PDEV_DMA_RING_BUF_RELEASE_EVENTID. Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591688014-26441-1-git-send-email-periyasa@codeaurora.org
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-11ath11k: build HE 6 GHz capabilityRajkumar Manoharan
Build 6 GHz band capability from HT and VHT capabilities reported by firmware. Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591057888-2862-1-git-send-email-rmanohar@codeaurora.org
2020-06-11ath11k: Add support for 6g scan hintPradeep Kumar Chitrapu
Add support for 6Ghz short ssid and bssid hint mechanism as part of scan command. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603001724.12161-9-pradeepc@codeaurora.org
2020-06-11ath11k: Send multiple scan_chan_list messages if requiredPradeep Kumar Chitrapu
With addition of 6Ghz channels, it is possible that wmi buffer size can exceed the maximum wmi buffer size. So iterate over the channel list, and send multiple messages till channel list is empty. Also mark PSC channel flag for 6GHz channels accordingly. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603001724.12161-8-pradeepc@codeaurora.org
2020-06-11ath11k: Add 6G scan dwell time parameter in scan request commandPradeep Kumar Chitrapu
Add 6G scan active and passive dwell time parameter to scan request. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603001724.12161-7-pradeepc@codeaurora.org
2020-06-11ath11k: set psc channel flag when sending channel list to firmware.Pradeep Kumar Chitrapu
If 6 ghz channel is a Preferred Scanning Channel(PSC), mark the channel flag accordingly when updating channel list to firmware. This will be used when making scanning decision in 6GHz channels. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603001724.12161-6-pradeepc@codeaurora.org
2020-06-11ath11k: extend peer_assoc_cmd for 6GHz bandPradeep Kumar Chitrapu
This adds support required for configuring min_data_rate of 6GHz oper IE and peer_he_caps_6ghz in peer assoc command. The Minimum Rate field indicates the minimum rate, in units of 1 Mb/s, that the non-AP STA is allowed to use for sending PPDUs as defined in IEEE P802.11ax™/D6.0. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603001724.12161-5-pradeepc@codeaurora.org
2020-06-11ath11k: Use freq instead of channel number in rx pathPradeep Kumar Chitrapu
As 6GHz cahnnel numbers overlap with those of 5GHz and 2GHz bands, it is necessary to use frequency when determining the band info in rx path. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603001724.12161-4-pradeepc@codeaurora.org
2020-06-11ath11k: add support for 6GHz radio in driverPradeep Kumar Chitrapu
This patch adds 6GHz band support and mac80211 registration for the 6G phy radio. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603001724.12161-3-pradeepc@codeaurora.org
2020-06-11ath11k: add 6G frequency list supported by driverPradeep Kumar Chitrapu
This patch adds support for 6GHz frequency listing. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200603001724.12161-2-pradeepc@codeaurora.org
2020-05-30ath11k: clear DCM max constellation tx valueMuna Sinada
According to 11ax spec. draft 4.0. DCM Max Constellation Tx data field should be set to "Reserved" for an AP, therefore bit is cleared. Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1590707417-29672-1-git-send-email-msinada@codeaurora.org
2020-05-30ath11k: reset trigger frame MAC padding durationMuna Sinada
The value was 3 and it's reserved value. Corrected to maintain fw defaults. Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1590706483-27609-1-git-send-email-msinada@codeaurora.org
2020-05-29Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.8. Major changes: ath10k * SDIO and SNOC are not experimental anymore
2020-05-26Merge tag 'mac80211-next-for-net-next-2020-04-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== One batch of changes, containing: * hwsim improvements from Jouni and myself, to be able to test more scenarios easily * some more HE (802.11ax) support * some initial S1G (sub 1 GHz) work for fractional MHz channels * some (action) frame registration updates to help DPP support * along with other various improvements/fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-19ath11k: Fix some resource leaks in error path in 'ath11k_thermal_register()'Christophe JAILLET
If 'thermal_cooling_device_register()' fails, we must undo what has been allocated so far. So we must go to 'err_thermal_destroy' instead of returning directly In case of error in 'ath11k_thermal_register()', the previous 'thermal_cooling_device_register()' call must also be undone. Move the 'ar->thermal.cdev = cdev' a few lines above in order for this to be done in 'ath11k_thermal_unregister()' which is called in the error handling path. Fixes: 2a63bbca06b2 ("ath11k: add thermal cooling device support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200513201454.258111-1-christophe.jaillet@wanadoo.fr
2020-05-13ath11k: fix htt stats module not handle multiple skbsPradeep Kumar Chitrapu
HTT EXT stats comes in stream of TLVs spanning over multiple messages. Currently completion is being sent for each message which is creating a race where stats_req is being accessed for filling in second message after the memory is already freed in release operation. Fix this by issuing completion once all the messages are received and processed. Driver knows this info from DONE bit set in htt msg. Also fix locking required for htt stats. Co-developed-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1589221074-28778-1-git-send-email-pradeepc@codeaurora.org
2020-05-12ath11k: convert to devm_platform_get_and_ioremap_resourceWei Yongjun
Use the helper function that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200508075323.81128-1-weiyongjun1@huawei.com
2020-05-12ath11k: remove redundant initialization of pointer infoColin Ian King
Pointer info is being assigned twice, once at the start of the function and secondly when it is just about to be accessed. Remove the redundant initialization and keep the original assignment to info that is close to the memcpy that uses it. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200507164318.56570-1-colin.king@canonical.com
2020-05-11ath11k: Remove bus layer includes from upper layerGovind Singh
Bus level header files needs to be abstracted by upper layer. Remove bus layer includes by adding appropriate header files. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200506094400.4740-4-govinds@codeaurora.org
2020-05-11ath11k: Add drv private for bus opaque structGovind Singh
Add drv private opaque structure to have bus level structure for multibus support. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200506094400.4740-3-govinds@codeaurora.org
2020-05-11ath11k: Add support for multibus supportGovind Singh
Current design supports only AHB interface for 11ax chipset. Refactor the code by adding hif layer for bus level abstraction to support PCI based device. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200506094400.4740-2-govinds@codeaurora.org
2020-05-11ath11k: remove stale monitor status descriptorMiles Hu
The driver is not handling monitor status descriptor whenever the done bit of status descriptor is not set by hardware. This leave a stale entry in monitor status ring and flooding warning message. Fix that by removing the descriptor and move forward to next one in monitor status ring. Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1588642063-6950-1-git-send-email-rmanohar@codeaurora.org
2020-05-07Merge tag 'wireless-drivers-next-2020-05-07' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.8 First set of patches for v5.8. Changes all over, ath10k apparently seeing most new features this time. rtw88 also had lots of changes due to preparation for new hardware support. In this pull request there's also a new macro to include/linux/iopoll: read_poll_timeout_atomic(). This is needed by rtw88 for atomic polling. Major changes: ath11k * add debugfs file for testing ADDBA and DELBA * add 802.11 encapsulation offload on hardware support * add htt_peer_stats_reset debugfs file ath10k * enable VHT160 and VHT80+80 modes * enable radar detection in secondary segment * sdio: disable TX complete indication to improve throughput * sdio: decrease power consumption * sdio: add HTT TX bundle support to increase throughput * sdio: add rx bitrate reporting ath9k * improvements to AR9002 calibration logic carl9170 * remove buggy P2P_GO support p54usb * add support for AirVasT USB stick rtw88 * add support for antenna configuration ti wlcore * add support for AES_CMAC cipher iwlwifi * support for a few new FW API versions * new hw configs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06ath11k: Replace zero-length array with flexible-arrayGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200504201224.GA32282@embeddedor
2020-05-06ath11k: fix kernel panic by freeing the msdu received with invalid lengthTamizh Chelvam
In certain scenario host receives the packets with invalid length which causes below kernel panic. Free up those msdus to avoid this kernel panic. 2270.028121: <6> task: ffffffc0008306d0 ti: ffffffc0008306d0 task.ti: ffffffc0008306d0 2270.035247: <2> PC is at skb_panic+0x40/0x44 2270.042784: <2> LR is at skb_panic+0x40/0x44 2270.521775: <2> [<ffffffc0004a06e0>] skb_panic+0x40/0x44 2270.524039: <2> [<ffffffc0004a1278>] skb_put+0x54/0x5c 2270.529264: <2> [<ffffffbffcc373a8>] ath11k_dp_process_rx_err+0x320/0x5b0 [ath11k] 2270.533860: <2> [<ffffffbffcc30b68>] ath11k_dp_service_srng+0x80/0x268 [ath11k] 2270.541063: <2> [<ffffffbffcc1d554>] ath11k_hal_rx_reo_ent_buf_paddr_get+0x200/0xb64 [ath11k] 2270.547917: <2> [<ffffffc0004b1f74>] net_rx_action+0xf8/0x274 2270.556247: <2> [<ffffffc000099df4>] __do_softirq+0x128/0x228 2270.561625: <2> [<ffffffc00009a130>] irq_exit+0x84/0xcc 2270.567008: <2> [<ffffffc0000cfb28>] __handle_domain_irq+0x8c/0xb0 2270.571695: <2> [<ffffffc000082484>] gic_handle_irq+0x6c/0xbc Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1588611568-20791-1-git-send-email-tamizhr@codeaurora.org
2020-05-06ath11k: Add support to reset htt peer statsAshok Raj Nagarajan
This patch add supports to reset the per peer htt stats. Usage: echo 1 > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/stations/<peer MAC addr>/htt_peer_stats_reset While doing so, sync the wmi services between FW and host. Signed-off-by: Ashok Raj Nagarajan <arnagara@codeaurora.org> Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1588610147-20231-1-git-send-email-tamizhr@codeaurora.org
2020-05-06ath11k: add tx hw 802.11 encapsulation offloading supportJohn Crispin
This patch adds support for ethernet rxtx mode to the driver. The feature is enabled via a new module parameter. If enabled to driver will enable the feature on a per vif basis if all other requirements were met. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200430152814.18481-1-john@phrozen.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 11:19:46 +0000