summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath11k/pci.c
AgeCommit message (Collapse)Author
2020-10-01ath11k: enable shadow register configuration and accessCarl Huang
To enable shadow register access, host needs to pass shadow register configuration to firmware via qmi message. Host also needs to update ring's HP or TP address to shadow register address. The write operation to shadow register will be forwarded to target register by hardware automatically, and the write operation to shadow register is permitted even when the target is in power save or sleep mode. Update the shadow config whenever power up happens. This feature is controlled by hw parameter supports_shadow_regs which is only enabled for QCA6390. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601544890-13450-3-git-send-email-kvalo@codeaurora.org
2020-10-01ath11k: read and write registers below unwindowed addressCarl Huang
For QCA6390, host can read and write registers below unwindowed address directly without programming the window register. For registers below bar0 + 4k - 32, host can read and write regardless of the power save state. Shadow registers are located below bar0 + 4K - 32. Before MHI power up, there is no need to wakeup MHI so ini_done is added to indicate it. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601544890-13450-2-git-send-email-kvalo@codeaurora.org
2020-10-01ath11k: pci: fix rmmod crashCarl Huang
For QCA6390 we first need to call free_irq() and only then disable_msi(). Otherwise a kernel BUG below will happen. Also free core, hal_srng and ce resources during ath11k_pci_remove(). [ 1089.425506] ------------[ cut here ]------------ [ 1089.425510] kernel BUG at drivers/pci/msi.c:375! [ 1089.425514] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI [ 1089.425517] CPU: 1 PID: 20539 Comm: rmmod Not tainted 5.9.0-rc5-wt-ath+ #198 [ 1089.425519] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0049.2018.0801.1601 08/01/2018 [ 1089.425523] RIP: 0010:free_msi_irqs+0x184/0x1b0 [ 1089.425526] Code: 14 85 c0 0f 84 cc fe ff ff 31 ed eb 0f 83 c5 01 39 6b 14 0f 86 bc fe ff ff 8b 7b 10 01 ef e8 c3 01 bf ff 48 83 78 70 00 74 e3 <0f> 0b 49 8d b5 b0 00 00 0 [ 1089.425528] RSP: 0018:ffffb128c0cf7dd0 EFLAGS: 00010282 [ 1089.425530] RAX: ffff947d67549000 RBX: ffff947cd2d25200 RCX: 0000000000000000 [ 1089.425532] RDX: ffff947d94a6f928 RSI: ffff947d94a6fa18 RDI: 0000000000000099 [ 1089.425533] RBP: 0000000000000000 R08: ffff947d67549000 R09: ffffffff86670050 [ 1089.425535] R10: 0000000000000000 R11: 0000000000000000 R12: ffff947d96c194f0 [ 1089.425537] R13: ffff947d96c19000 R14: 0000000000000000 R15: ffffffffc0225250 [ 1089.425539] FS: 00007f97c44ed700(0000) GS:ffff947d9c200000(0000) knlGS:0000000000000000 [ 1089.425541] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1089.425543] CR2: 00007f97c408d701 CR3: 0000000192bc0006 CR4: 00000000003706e0 [ 1089.425544] Call Trace: [ 1089.425549] ath11k_pci_remove+0x2b/0x90 [ath11k_pci] [ 1089.425553] pci_device_remove+0x36/0x90 [ 1089.425556] __device_release_driver+0x16c/0x220 [ 1089.425559] driver_detach+0xcf/0x110 [ 1089.425561] bus_remove_driver+0x4d/0xa2 [ 1089.425564] pci_unregister_driver+0x25/0xa0 [ 1089.425568] __do_sys_delete_module+0x163/0x240 [ 1089.425571] ? trace_hardirqs_on+0x1c/0x100 [ 1089.425575] do_syscall_64+0x33/0x40 [ 1089.425577] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1089.425579] RIP: 0033:0x7f97c401d9e7 [ 1089.425581] Code: 73 01 c3 48 8b 0d b1 c4 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c [ 1089.425583] RSP: 002b:00007fff1e0fb728 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 1089.425585] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f97c401d9e7 [ 1089.425587] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005585aad022e8 [ 1089.425589] RBP: 00005585aad02280 R08: 0000000000000000 R09: 1999999999999999 [ 1089.425591] R10: 0000000000000883 R11: 0000000000000206 R12: 00007fff1e0fb940 [ 1089.425592] R13: 00007fff1e0fd917 R14: 0000000000000000 R15: 00005585aad02280 [ 1089.425596] Modules linked in: ath11k_pci(-) ath11k qmi_helpers qrtr_mhi mhi qrtr ns nvme nvme_core [last unloaded: mhi] [ 1089.425603] ---[ end trace 2a81926cc0708a38 ]--- Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601463073-12106-3-git-send-email-kvalo@codeaurora.org
2020-10-01ath11k: pci: check TCSR_SOC_HW_VERSIONKalle Valo
There are different versions of QCA6390. Check TCSR_SOC_HW_VERSION to make sure that the device is hw2.0, all the rest are unsupported. This needs to be checked after ath11k_pci_claim() so move the whole switch choosing hw_ver. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601399736-3210-5-git-send-email-kvalo@codeaurora.org
2020-09-11ath11k: move target ce configs to hw_paramsAnilkumar Kolli
Move target CE config and target CE service config to hw_params. No functional changes. Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746cb685d9-6bedeccb-29a1-4d32-8664-fcfe7d105f4a-000000@us-west-2.amazonses.com
2020-08-31ath11k: fix missing error check on call to ath11k_pci_get_user_msi_assignmentColin Ian King
The return error check on the call to ath11k_pci_get_user_msi_assignment is missing. If an error does occur, num_vectors is still set to zero and later on a division by zero can occur when variable vector is being calculated. Fix this by adding an error check after the call. Addresses-Coverity: ("Division or modulo by zero") Fixes: d4ecb90b3857 ("ath11k: enable DP interrupt setup for QCA6390") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819111452.52419-1-colin.king@canonical.com
2020-08-18ath11k: reset MHI during power down and power upCarl Huang
For QCA6390, normal power up and power down can't bring MHI to a workable state. This happens especially in warm reboot and rmmod and insmod. Host needs to write a few registers to bring MHI to normal state. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeauroro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597555891-26112-10-git-send-email-kvalo@codeaurora.org
2020-08-18ath11k: enable DP interrupt setup for QCA6390Carl Huang
QCA6390 uses MSI interrupt, so need to configure msi_add and msi_data to dp srngs. As there are so many DP srngs, so need to group them. Each group shares one MSI interrupt. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597555891-26112-2-git-send-email-kvalo@codeaurora.org
2020-08-18ath11k: disable CE interrupt before hif startCarl Huang
Disable CE interrupt otherwise interrupt may come before host initialized related context. This also fixes unbalanced interrupt enablement. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597576599-8857-9-git-send-email-kvalo@codeaurora.org
2020-08-18ath11k: ce: remove CE_COUNT() macroKalle Valo
This macro is evil as it's accesses ab variable in a hidden way. It's better for readibility to access ab->hw_params.ce_count directly. This is done in a separate patch to keep the patches simple. No functional changes. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597576599-8857-6-git-send-email-kvalo@codeaurora.org
2020-08-18ath11k: ce: support different CE configurationsCarl Huang
QCA6390 uses only 9 Copy Engines while IPQ8074 may use 12, make it possible to change CE configuration dynamically via hw_params. The defines for host_ce_config_wlan and CE_COUNT are temporary solutions, they will be removed in the following patches to keep things simple. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597576599-8857-4-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: setup ce tasklet for control pathGovind Singh
CE srng is used for control path and CE srng processing is done using tasklet bottom half. Setup ce tasklet initialization and scheduling for control path. Needed for PCI support. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597389030-13887-7-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: configure copy engine msi address in CE srngGovind Singh
Fill msi base address and msi data to be programmed in CE srang. This is used by the srng to generate the msi interrupt. Needed for PCI support. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597389030-13887-6-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: pci: add read32() and write32() hif operationsGovind Singh
Add support for bus read/write/window selection operations for reading hardware memory. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597389030-13887-5-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: fill appropriate QMI service instance id for QCA6390Govind Singh
QMI service instance id is used for qmi service lookup, IPQ8074 and QCA6390 uses different instance id for service lookup. Fill appropriate QMI service instance id for respective targets. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597389030-13887-4-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: add board file support for PCI devicesGovind Singh
PCI devices like QCA6390 load the board file differently, add support for that and the method is chosen using bus_params variables. Add support to create board name for different targets. This board name is used to parse the board data from board-2.bin for ahb/pci based targets. As struct target_mem_chunk::vaddr was changed from 'u32' to 'u32 *' in ath11k_qmi_assign_target_mem_chunk() vaddr assignments were changed to NULL to avoid a compilation warning. IPQ8074 does not use the vaddr field for anything so that change does not affect functionality. At the moment this only supports board files with BIN type. Support for ELF type, which seems to be more popular on QCA6390 devices, needs to be added later. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597389030-13887-3-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: add support for m3 firmwareGovind Singh
PCI devices like QCA6390 have a separate firmware image for the m3 micro-controller. Add support to load the firmware using m3.bin file. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597389030-13887-2-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: use remoteproc only with AHB devicesGovind Singh
QCA6390 and other PCI devices use MHI based firmware loading and do not use remoteproc, so enable it only for AHB devices. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597309466-19688-11-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: pci: add HAL, CE and core initialisationGovind Singh
Define CE pipe/qmi config and setup pci irq for the same. Call ath11k_core_init(). Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597309466-19688-10-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: register MHI controller device for QCA6390Govind Singh
Modem Host Interface (MHI) is a communication protocol to communicate with external Qualcomm modems and Wi-Fi chipsets over high speed peripheral buses. Even though MHI doesn’t dictate underlying physical layer, protocol and MHI stack is structured for PCI based devices. Register directly with MHI subsystem as a MHI device driver for firmware download to QCA6390. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597309466-19688-9-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: implement ath11k_core_pre_init()Kalle Valo
This is needed to initialise hw_params before MHI registration starts. MHI needs location of firmware directory and that's delivered via hw_params. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597309466-19688-8-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: pci: add MSI config initialisationGovind Singh
QCA6390 uses PCI MSI for CE/MHI/DP interrupt. Add MSI vector mapping and MSI enable/disable operations. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597309466-19688-7-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: pci: setup resourcesGovind Singh
Add support for setting up pci region and dma mask. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597309466-19688-6-git-send-email-kvalo@codeaurora.org
2020-08-17ath11k: add simple PCI client driver for QCA6390 chipsetGovind Singh
QCA6390 is a PCI based 11ax chipset, split AHB into own kernel module ath11k_ahb.ko and add ath11k_pci.ko for PCI devices. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597309466-19688-5-git-send-email-kvalo@codeaurora.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 13:19:31 +0000