summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath10k
AgeCommit message (Collapse)Author
2017-03-20ath10k: fix incorrect wlan_mac_base in qca6174_regsRyan Hsu
In the 'commit ebee76f7fa46 ("ath10k: allow setting coverage class")', it inherits the design and the address offset from ath9k, but the address is not applicable to QCA6174, which leads to a random crash while doing the resume() operation, since the set_coverage_class.ops will be called from ieee80211_reconfig() when resume() (if the wow is not configured). Fix the incorrect address offset here to avoid the random crash. Verified on QCA6174/hw3.0 with firmware WLAN.RM.4.4-00022-QCARMSWPZ-2. kvalo: this also seems to fix a regression with firmware restart. Fixes: ebee76f7fa46 ("ath10k: allow setting coverage class") Cc: <stable@vger.kernel.org> # v4.10 Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-03-02ath10k: search SMBIOS for OEM board file extensionWaldemar Rymarkiewicz
Board Data File (BDF) is loaded upon driver boot-up procedure. The right board data file is identified, among others, by device and sybsystem ids. The problem, however, can occur when the (default) board data file cannot fulfill with the vendor requirements and it is necessary to use a different board data file. To solve the issue QCA uses SMBIOS type 0xF8 to store Board Data File Name Extension to specify the extension/variant name. The driver will take the extension suffix into consideration and will load the right (non-default) board data file if necessary. If it is unnecessary to use extension board data file, please leave the SMBIOS field blank and default configuration will be used. Example: If a default board data file for a specific board is identified by a string "bus=pci,vendor=168c,device=003e,subsystem-vendor=1028, subsystem-device=0310" then the OEM specific data file, if used, could be identified by variant suffix: "bus=pci,vendor=168c,device=003e,subsystem-vendor=1028, subsystem-device=0310,variant=DE_1AB" If board data file name extension is set but board-2.bin does not contain board data file for the variant, the driver will fallback to the default board data file not to break backward compatibility. This was first applied in commit f2593cb1b291 ("ath10k: Search SMBIOS for OEM board file extension") but later reverted in commit 005c3490e9db ("Revert "ath10k: Search SMBIOS for OEM board file extension"". This patch is now otherwise the same as commit f2593cb1b291 except the regression fixed. Signed-off-by: Waldemar Rymarkiewicz <ext.waldemar.rymarkiewicz@tieto.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-21Revert "ath10k: Search SMBIOS for OEM board file extension"Kalle Valo
This reverts commit f2593cb1b29185d38db706cbcbe22ed538720ae1. Paul reported that this patch with older board-2.bin ath10k initialisation fails on Dell XPS 13: ath10k_pci 0000:3a:00.0: failed to fetch board data for bus=pci,vendor=168c, device=003e,subsystem-vendor=1a56,subsystem-device=1535,variant=RV_0520 from ath10k/QCA6174/hw3.0/board-2.bin The reason is that the older board-2.bin does not have the variant version of the image name and ath10k does not fallback to the older naming scheme. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=185621#c9 Fixes: f2593cb1b291 ("ath10k: Search SMBIOS for OEM board file extension") Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14ath10k: fix the garage chars in board file name creationRyan Hsu
The variant[] string will be valid only if the bdf_ext is set. The string memory needs to be null-terminated to avoid the undefined garbage appended by the subsequent board file name creation. ath10k_pci 0000:04:00.0: failed to fetch board data for "bus=pci,vendor=168c,device=003e,subsystem-vendor=168c,subsystem-device=3363��P�����" from ath10k/QCA6174/hw3.0/board-2.bin Fixes: f2593cb1b291 ("ath10k: Search SMBIOS for OEM board file extension") Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: convert warning about non-existent OTP board id to debug messageKalle Valo
Currently ath10k unncessarily warns about board id not available from OTP: ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1 ath10k_pci 0000:02:00.0: firmware ver 10.2.4.70.9-2 api 5 features no-p2p,raw-mode crc32 b8d50af5 ath10k_pci 0000:02:00.0: board id is not exist in otp, ignore it ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 ath10k_pci 0000:02:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 But not all boards have the board id in OTP so this is not a problem and no need to confuse the user with that info. So this can be safely changed to a debug message. Also fix grammar in the debug message. Fixes: d2e202c06ca4 ("ath10k: ignore configuring the incorrect board_id") Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: silence firmware file probing warningsMichal Kazior
Firmware files are versioned to prevent older driver instances to load unsupported firmware blobs. This is reflected with a fallback logic which attempts to load several firmware files. This however produced a lot of unnecessary warnings sometimes confusing users and leading them to rename firmware files making things even more confusing. Hence use request_firmware_direct() which does not produce extra warnings. This shouldn't really break anything because most modern systems don't rely on udev/hotplug helpers to load firmware files anymore. For example it was confirmed that LEDE does not user helper. This also fixes a 60 second delay per _each_ unexistent firmware/calibration file with distros which have CONFIG_FW_LOADER_USER_HELPER_FALLBACK enabled, RHEL being a notable example. Using ath10k with firmware-2.bin this might end up into a five minute delay in boot. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> [kvalo@qca.qualcomm.com: add more info to the commit log] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: add directory to board data error messageKalle Valo
This way user has a better idea what file exactly is missing. This is needed when we switch to using request_firmware_direct() which doesn't print any errors anymore. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: fetch firmware images in a loopErik Stromdahl
To make it easier to handle minimum and maximum firmware API numbers convert the firmware fetch functionality to a loop. If no firmware image is found print an error with minimum and maximum API numbers and the name of firmware directory. This is needed when we switch to using request_firmware_direct() which doesn't print any errors anymore. Also add a new function for creating the fw file name dynamically which makes it easier to add new bus support, for example SDIO and USB, later. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> [kvalo@qca.qualcomm.com: remove sdio/usb part, new error message, clarify commit log] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: fix napi crash during rmmod when probe firmware failsKalle Valo
This fixes the below crash when ath10k probe firmware fails, NAPI polling tries to access a rx ring resource which was never allocated. An easy way to reproduce this is easy to remove all the firmware files, load ath10k modules and ath10k will crash when calling 'rmmod ath10k_pci'. The fix is to call napi_enable() from ath10k_pci_hif_start() so that it matches with napi_disable() being called from ath10k_pci_hif_stop(). Big thanks to Mohammed Shafi Shajakhan who debugged this and provided first version of the fix. In this patch I just fix the actual problem in pci.c instead of having a workaround in core.c. BUG: unable to handle kernel NULL pointer dereference at (null) IP: __ath10k_htt_rx_ring_fill_n+0x19/0x230 [ath10k_core] __ath10k_htt_rx_ring_fill_n+0x19/0x230 [ath10k_core] Call Trace: [<ffffffffa113ec62>] ath10k_htt_rx_msdu_buff_replenish+0x42/0x90 [ath10k_core] [<ffffffffa113f393>] ath10k_htt_txrx_compl_task+0x433/0x17d0 [ath10k_core] [<ffffffff8114406d>] ? __wake_up_common+0x4d/0x80 [<ffffffff811349ec>] ? cpu_load_update+0xdc/0x150 [<ffffffffa119301d>] ? ath10k_pci_read32+0xd/0x10 [ath10k_pci] [<ffffffffa1195b17>] ath10k_pci_napi_poll+0x47/0x110 [ath10k_pci] [<ffffffff817863af>] net_rx_action+0x20f/0x370 Reported-by: Ben Greear <greearb@candelatech.com> Fixes: 3c97f5de1f28 ("ath10k: implement NAPI support") Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: fix commentAmadeusz Sławiński
I wanted to take a look and it's apparently in other header Signed-off-by: Amadeusz Sławiński <amadeusz.slawinski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: use size_t for len variablesAmadeusz Sławiński
cleanup to consolidate type used for len variables Signed-off-by: Amadeusz Sławiński <amadeusz.slawinski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-14ath10k: remove ath10k_vif_to_arvif()Amadeusz Sławiński
it adds unnecessary level of indirection, while we just access structure field Signed-off-by: Amadeusz Sławiński <amadeusz.slawinski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-08ath10k: select WANT_DEV_COREDUMPJohannes Berg
This is necessary so that - if ath10k is the only driver using dev_coredump*() - the functionality is built into the kernel. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-08ath10k: remove unneeded semicolonWaldemar Rymarkiewicz
Remove redundant semicolon after switch statement. Signed-off-by: Waldemar Rymarkiewicz <ext.waldemar.rymarkiewicz@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath10k: fix reading sram contents for QCA4019Ashok Raj Nagarajan
With QCA4019 platform, SRAM address can be accessed directly from host but currently, we are assuming sram addresses cannot be accessed directly and hence we convert the addresses. While there, clean up growing hw checks during conversion of target CPU address to CE address. Now we have function pointer pertaining to different chips. Signed-off-by: Ashok Raj Nagarajan <arnagara@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath10k: fix boot failure in UTF mode/testmodeTamizh chelvam
Rx filter reset and the dynamic tx switch mode (EXT_RESOURCE_CFG) configuration are causing the following errors when UTF firmware is loaded to the target. Error message 1: [ 598.015629] ath10k_pci 0001:01:00.0: failed to ping firmware: -110 [ 598.020828] ath10k_pci 0001:01:00.0: failed to reset rx filter: -110 [ 598.141556] ath10k_pci 0001:01:00.0: failed to start core (testmode): -110 Error message 2: [ 668.615839] ath10k_ahb a000000.wifi: failed to send ext resource cfg command : -95 [ 668.618902] ath10k_ahb a000000.wifi: failed to start core (testmode): -95 Avoiding these configurations while bringing the target in testmode is solving the problem. Cc: stable@vger.kernel.org Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath10k: add debugfs support to get per peer tids log via tracingMaharaja Kennadyrajan
This patch provides support to get per peer tids log. echo 1 > /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/ XX:XX/peer_debug_trigger These logs will be the part of FWLOGS which we collect the logs via tracing interface. Here we will get the peer tigd logs only once(not repeatedly) when we write 1 to the debugfs file. Signed-off-by: Maharaja Kennadyrajan <c_mkenna@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath10k: few whitespace fixesKalle Valo
Fixes checkpatch warnings: drivers/net/wireless/ath/ath10k/pci.c:1593: Statements should start on a tabstop drivers/net/wireless/ath/ath10k/ce.c:962: Alignment should match open parenthesis Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath10k: use names in function definition argumentsKalle Valo
Fixes new checkpatch warnings: drivers/net/wireless/ath/ath10k/htt.h:1823: function definition argument 'struct sk_buff *' should also have an identifier name drivers/net/wireless/ath/ath10k/wmi.h:6607: function definition argument 'struct wmi_start_scan_arg *' should also have an identifier name Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-07ath10k: prefer unsigned int over just unsignedKalle Valo
Fixes new checkpatch warnings: drivers/net/wireless/ath/ath10k/htt.h:1639: Prefer 'unsigned int' to bare use of 'unsigned' drivers/net/wireless/ath/ath10k/htt.h:1660: Prefer 'unsigned int' to bare use of 'unsigned' Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-01Merge tag 'wireless-drivers-next-for-davem-2017-02-01' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.11 It's nice to see rt2x00 development has becoming active, for example adding support for a new chip version. Also wcn36xx has been converted to use the recently merged QCOM_SMD subsystem. Otherwise new features and fixes it lots of drivers. Major changes: iwlwifi * some more work in preparation for A000 family support * add support for radiotap timestamps * some work on our firmware debugging capabilities wcn36xx * convert to a proper QCOM_SMD driver (from the platform_driver interface) ath10k * VHT160 support * dump Copy Engine registers during firmware crash * search board file extension from SMBIOS wil6210 * add disable_ap_sme module parameter rt2x00 * support RT3352 with external PA * support for RT3352 with 20MHz crystal * add support for RT5350 WiSoC brcmfmac * add support for BCM43455 sdio device rtl8xxxu * add support for D-Link DWA-131 rev E1, TP-Link TL-WN822N v4 and others ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30drivers: net: generalize napi_complete_done()Eric Dumazet
napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27ath10k: Search SMBIOS for OEM board file extensionWaldemar Rymarkiewicz
Board Data File (BDF) is loaded upon driver boot-up procedure. The right board data file is identified, among others, by device and sybsystem ids. The problem, however, can occur when the (default) board data file cannot fulfill with the vendor requirements and it is necessary to use a different board data file. To solve the issue QCA uses SMBIOS type 0xF8 to store Board Data File Name Extension to specify the extension/variant name. The driver will take the extension suffix into consideration and will load the right (non-default) board data file if necessary. If it is unnecessary to use extension board data file, please leave the SMBIOS field blank and default configuration will be used. Example: If a default board data file for a specific board is identified by a string "bus=pci,vendor=168c,device=003e,subsystem-vendor=1028, subsystem-device=0310" then the OEM specific data file, if used, could be identified by variant suffix: "bus=pci,vendor=168c,device=003e,subsystem-vendor=1028, subsystem-device=0310,variant=DE_1AB" Signed-off-by: Waldemar Rymarkiewicz <ext.waldemar.rymarkiewicz@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-27ath10k: fix typo in addr calculationSrinivas Kandagatla
CORE_CTRL_ADDRESS is offset in register address space, it does not make sense to OR it to derive the final address. It looks like its a typo, so fix it. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-27ath10k: use dma_zalloc_coherent()Srinivas Kandagatla
use dma_zalloc_coherent() instead of dma_alloc_coherent and memset(). Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-27ath10k: remove multiple defines of DIAG_TRANSFER_LIMITSrinivas Kandagatla
DIAG_TRANSFER_LIMIT is redefined with same value and comments just below this entry, remove this duplicate entry. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-19ath10k: dump Copy Engine registers during firmware crashMohammed Shafi Shajakhan
Dump Copy Engine source and destination ring addresses. This is useful information to debug firmware crashes, assertes or hangs over long run assessing the Copy Engine Register status. This also enables dumping CE register status in debugfs Crash Dump file. Screenshot: ath10k_pci 0000:02:00.0: simulating hard firmware crash ath10k_pci 0000:02:00.0: firmware crashed! (uuid 84901ff5-d33c-456e-93ee-0165dea643cf) ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1 ath10k_pci 0000:02:00.0: firmware ver 10.2.4.70.59-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4159f498 ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 ath10k_pci 0000:02:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 ath10k_pci 0000:02:00.0: firmware register dump: ath10k_pci 0000:02:00.0: [00]: 0x4100016C 0x00000000 0x009A0F2A 0x00000000 ath10k_pci 0000:02:00.0: [04]: 0x00000000 0x00000000 0x00000000 0x00000000 ath10k_pci 0000:02:00.0: [08]: 0x00000000 0x00000000 0x00000000 0x00000000 ath10k_pci 0000:02:00.0: [12]: 0x00000000 0x00000000 0x00000000 0x00000000 ath10k_pci 0000:02:00.0: [16]: 0x00000000 0x00000000 0x00000000 0x009A0F2A ath10k_pci 0000:02:00.0: [20]: 0x00000000 0x00401930 0x00000000 0x00000000 ath10k_pci 0000:02:00.0: [24]: 0x00000000 0x00000000 0x00000000 0x00000000 ath10k_pci 0000:02:00.0: [28]: 0x00000000 0x00000000 0x00000000 0x00000000 ath10k_pci 0000:02:00.0: [32]: 0x00000000 0x00000000 0x00000000 0x00000000 ath10k_pci 0000:02:00.0: [36]: 0x00000000 0x00000000 0x00000000 0x00000000 ath10k_pci 0000:02:00.0: [40]: 0x00000000 0x00000000 0x00000000 0x00000000 ath10k_pci 0000:02:00.0: [44]: 0x00000000 0x00000000 0x00000000 0x00000000 ath10k_pci 0000:02:00.0: [48]: 0x00000000 0x00000000 0x00000000 0x00000000 ath10k_pci 0000:02:00.0: [52]: 0x00000000 0x00000000 0x00000000 0x00000000 ath10k_pci 0000:02:00.0: [56]: 0x00000000 0x00000000 0x00000000 0x00000000 ath10k_pci 0000:02:00.0: Copy Engine register dump: ath10k_pci 0000:02:00.0: [00]: 0x00057400 7 7 3 3 ath10k_pci 0000:02:00.0: [01]: 0x00057800 18 18 85 86 ath10k_pci 0000:02:00.0: [02]: 0x00057c00 49 49 48 49 ath10k_pci 0000:02:00.0: [03]: 0x00058000 16 16 17 16 ath10k_pci 0000:02:00.0: [04]: 0x00058400 4 4 44 4 ath10k_pci 0000:02:00.0: [05]: 0x00058800 12 12 11 12 ath10k_pci 0000:02:00.0: [06]: 0x00058c00 3 3 3 3 ath10k_pci 0000:02:00.0: [07]: 0x00059000 0 0 0 0 ieee80211 phy0: Hardware restart was requested ath10k_pci 0000:02:00.0: device successfully recovered Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> [kvalo@qca.qualcomm.com: simplify the implementation] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-19ath10k: fix per station tx bit rate reportingMohammed Shafi Shajakhan
Not clearing the previous tx bit rate status results in a ambigous tx bit rate reporting to mac80211/cfg80211, for example the previous bit rate status would have been marked as legacy rate , while the current rate would have been an HT/VHT rate with the tx bit rate flags set and this results in exporting tx bitrate as legacy rate but with HT/VHT rate flags set, fix this by clearing the tx bitrate status for each event. This also fixes the below warning when we do: iw dev wlan#N station dump WARNING: net/wireless/util.c:1222 cfg80211 [<c022f104>] (warn_slowpath_null) from [<bf3b9adc>] (cfg80211_calculate_bitrate+0x110/0x1f4 [cfg80211]) [<bf3b9adc>] (cfg80211_calculate_bitrate [cfg80211]) from [<bf3dcd54>] (nl80211_put_sta_rate+0x44/0x1dc [cfg80211]) [<bf3dcd54>] (nl80211_put_sta_rate [cfg80211]) from [<bf3cbc34>] (nl80211_set_interface+0x724/0xd70 [cfg80211]) [<bf3cbc34>] (nl80211_set_interface [cfg80211]) from [<bf3d0a18>] (nl80211_dump_station+0xdc/0x100 [cfg80211]) [<bf3d0a18>] (nl80211_dump_station [cfg80211]) Fixes: cec17c382140 ("ath10k: add per peer htt tx stats support for 10.4") Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-19ath10k: prevent sta pointer rcu violationMichal Kazior
Station pointers are RCU protected so driver must be extra careful if it tries to store them internally for later use outside of the RCU section it obtained it in. It was possible for station teardown to race with some htt events. The possible outcome could be a use-after-free and a crash. Only peer-flow-control capable firmware was affected (so hardware-wise qca99x0 and qca4019). This could be done in sta_state() itself via explicit synchronize_net() call but there's already a convenient sta_pre_rcu_remove() op that can be hooked up to avoid extra rcu stall. The peer->sta pointer itself can't be set to NULL/ERR_PTR because it is later used in sta_state() for extra sanity checks. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-14Merge tag 'mac80211-next-for-davem-2017-01-13' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== For 4.11, we seem to have more than in the past few releases: * socket owner support for connections, so when the wifi manager (e.g. wpa_supplicant) is killed, connections are torn down - wpa_supplicant is critical to managing certain operations, and can opt in to this where applicable * minstrel & minstrel_ht updates to be more efficient (time and space) * set wifi_acked/wifi_acked_valid for skb->destructor use in the kernel, which was already available to userspace * don't indicate new mesh peers that might be used if there's no room to add them * multicast-to-unicast support in mac80211, for better medium usage (since unicast frames can use *much* higher rates, by ~3 orders of magnitude) * add API to read channel (frequency) limitations from DT * add infrastructure to allow randomizing public action frames for MAC address privacy (still requires driver support) * many cleanups and small improvements/fixes across the board ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-13ath10k: fix tx legacy rate reportingMohammed Shafi Shajakhan
Tx legacy rate is reported 10 fold, as below iw dev wlan#N station dump | grep "tx bitrate" tx bitrate: 240.0 MBit/s This is because by mistake we multiply by the hardware reported rate twice by 10, fix this. Fixes: cec17c382140 ("ath10k: add per peer htt tx stats support for 10.4") Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-13ath10k: fix wifi connectivity and warning in rx with channel 169Mohammed Shafi Shajakhan
In countries where basic operation of channel 169 is allowed, this fixes the below WARN_ON_ONCE in Rx and fixes the station connectivity failure in channel 169 as the packet is dropped in the driver as the current check limits to channel 165. As of now all the packets beyond channel 165 is dropped, fix this by extending the range to channel 169. Call trace: drivers/net/wireless/ath/ath10k/wmi.c:1505 ath10k_wmi_event_mgmt_rx+0x278/0x440 [ath10k_core]() Call Trace: [<c158f812>] ? printk+0x2d/0x2f [<c105a182>] warn_slowpath_common+0x72/0xa0 [<f8b67b58>] ? ath10k_wmi_event_mgmt_rx+0x278/0x440 [<f8b67b58>] ? ath10k_wmi_event_mgmt_rx+0x278/0x440 [<c105a1d2>] warn_slowpath_null+0x22/0x30 [<f8b67b58>] ath10k_wmi_event_mgmt_rx+0x278/0x440 [<f8b0e72b>] ? ath10k_pci_sleep+0x8b/0xb0 [ath10k_pci] [<f8b6ac63>] ath10k_wmi_10_2_op_rx+0xf3/0x3b0 [<f8b6495e>] ath10k_wmi_process_rx+0x1e/0x60 [<f8b5f077>] ath10k_htc_rx_completion_handler+0x347/0x4d0 [ath10k_core] [<f8b11dc3>] ? ath10k_ce_completed_recv_next+0x53/0x70 [ath10k_pci] [<f8b0f921>] ath10k_pci_ce_recv_data+0x171/0x1d0 [ath10k_pci] [<f8b0ec69>] ? ath10k_pci_write32+0x39/0x80 [ath10k_pci] [<f8b120bc>] ath10k_ce_per_engine_service+0x5c/0xa0 [ath10k_pci] [<f8b1215f>] ath10k_ce_per_engine_service_any+0x5f/0x70 [ath10k_pci] [<c1060dc0>] ? local_bh_enable_ip+0x90/0x90 [<f8b1048b>] ath10k_pci_tasklet+0x1b/0x50 [ath10k_pci] Fixes: 34c30b0a5e97 ("ath10k: enable advertising support for channel 169, 5Ghz") Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-13ath10k: add accounting for the extended peer statisticsChristian Lamparter
The 10.4 firmware adds extended peer information to the firmware's statistics payload. This additional info is stored as a separate data field and the elements are stored in their own "peers_extd" list. These elements can pile up in the same way as the peer information elements. This is because the ath10k_wmi_10_4_op_pull_fw_stats() function tries to pull the same amount (num_peer_stats) for every statistic data unit. Fixes: 4a49ae94a448faa ("ath10k: fix 10.4 extended peer stats update") Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-13ath10k: add VHT160 supportSebastian Gottschall
This patch adds full VHT160 support for QCA9984 chipsets Tested on Netgear R7800. 80+80 is possible, but disabled so far since it seems to contain glitches like missing vht station flags (this may be firmware or mac80211 related). Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> [kvalo@qca.qualcomm.com: refactoring and fix few warnings] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-13ath10k: refactor ath10k_peer_assoc_h_phymode()Kalle Valo
When adding VHT160 support to ath10k_peer_assoc_h_phymode() the VHT mode selection code becomes too complex. Simplify it by refactoring the vht part to a separate function. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-12ath10k: htc: simplified credit distributionErik Stromdahl
Simplified transmit credit distribution code somewhat. Since the WMI control service will get assigned all credits there is no need for having a credit_allocation array in struct ath10k_htc. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-12ath10k: htc: removal of unused struct membersErik Stromdahl
Removed tx_credits_per_max_message and tx_credit_size from struct ath10k_htc_ep since they are not used anywhere in the code. They are just written, never read. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-01-02Merge tag 'wireless-drivers-next-for-davem-2017-01-02' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.11 The most notable change here is the inclusion of airtime fairness scheduling to ath9k. It prevents slow clients from hogging all the airtime and unfairly slowing down faster clients. Otherwise smaller changes and cleanup. Major changes: ath9k * cleanup eeprom endian handling * add airtime fairness scheduling ath10k * fix issues for new QCA9377 firmware version * support dev_coredump() for firmware crash dump * enable channel 169 on 5 GHz band ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-30ath10k: enable advertising support for channel 169, 5GhzMohammed Shafi Shajakhan
Enable advertising support for channel 169, 5Ghz so that based on the regulatory domain(country code) this channel shall be active for use. For example in countries like India this channel shall be available for use with latest regulatory updates Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-30ath10k: Remove passing unused argument for ath10k_mac_txMohammed Shafi Shajakhan
'ath10k_mac_tx' does not seems to use the per station table entry pointer 'sta' (struct ieee80211_sta), hence remove passing this unused argument Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-30ath10k: ignore configuring the incorrect board_idRyan Hsu
With command to get board_id from otp, in the case of following boot get otp board id result 0x00000000 board_id 0 chip_id 0 boot using board name 'bus=pci,bmi-chip-id=0,bmi-board-id=0" ... failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=0 from ath10k/QCA6174/hw3.0/board-2.bin The invalid board_id=0 will be used as index to search in the board-2.bin. Ignore the case with board_id=0, as it means the otp is not carrying the board id information. Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-30ath10k: recal the txpower when removing interfaceRyan Hsu
The txpower is being recalculated when adding interface to make sure txpower won't overshoot the spec, and when removing the interface, the txpower should again to be recalculated to restore the correct value from the active interface list. Following is one of the scenario vdev0 is created as STA and connected: txpower:23 vdev1 is created as P2P_DEVICE for control interface: txpower:0 vdev2 is created as p2p go/gc interface: txpower is 21 So the vdev2@txpower:21 will be set to firmware when vdev2 is created. When we tear down the vdev2, the txpower needs to be recalculated to re-set it to vdev0@txpower:23 as vdev0/vdev1 are the active interface. ath10k_pci mac vdev 0 peer create 8c:fd:f0:01:62:98 ath10k_pci mac vdev_id 0 txpower 23 ... (adding interface) ath10k_pci mac vdev create 2 (add interface) type 1 subtype 3 ath10k_pci mac vdev_id 2 txpower 21 ath10k_pci mac txpower 21 ... (removing interface) ath10k_pci mac vdev 2 delete (remove interface) ath10k_pci vdev 1 txpower 0 ath10k_pci vdev 0 txpower 23 ath10k_pci mac txpower 23 Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-30ath10k: support dev_coredump for crash dumpArun Khandavalli
Whenever firmware crashes, and both CONFIG_ATH10K_DEBUGFS and CONFIG_ALLOW_DEV_COREDUMP are enabled, dump information about the crash via a devcoredump device. Dump can be read from userspace for further analysis from: /sys/class/devcoredump/devcd*/data As until now we have provided the firmware crash dump file via fw_crash_dump debugfs keep it still available but deprecate and a warning print that the user should switch to using dev_coredump. Future improvement would be not to depend on CONFIG_ATH10K_DEBUGFS, as there might be systems which want to get the firmware crash dump but not enable debugfs. How to handle memory consumption is also something which needs to be taken into account. Signed-off-by: Arun Khandavalli <akhandav@qti.qualcomm.com> [kvalo@qca.qualcomm.com: rebase, fixes, improve commit log] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-30ath10k: fix incorrect txpower set by P2P_DEVICE interfaceRyan Hsu
Ath10k reports the phy capability that supports P2P_DEVICE interface. When we use the P2P supported wpa_supplicant to start connection, it'll create two interfaces, one is wlan0 (vdev_id=0) and one is P2P_DEVICE p2p-dev-wlan0 which is for p2p control channel (vdev_id=1). ath10k_pci mac vdev create 0 (add interface) type 2 subtype 0 ath10k_add_interface: vdev_id: 0, txpower: 0, bss_power: 0 ... ath10k_pci mac vdev create 1 (add interface) type 2 subtype 1 ath10k_add_interface: vdev_id: 1, txpower: 0, bss_power: 0 And the txpower in per vif bss_conf will only be set to valid tx power when the interface is assigned with channel_ctx. But this P2P_DEVICE interface will never be used for any connection, so that the uninitialized bss_conf.txpower=0 is assinged to the arvif->txpower when interface created. Since the txpower configuration is firmware per physical interface. So the smallest txpower of all vifs will be the one limit the tx power of the physical device, that causing the low txpower issue on other active interfaces. wlan0: Limiting TX power to 21 (24 - 3) dBm ath10k_pci mac vdev_id 0 txpower 21 ath10k_mac_txpower_recalc: vdev_id: 1, txpower: 0 ath10k_mac_txpower_recalc: vdev_id: 0, txpower: 21 ath10k_pci mac txpower 0 This issue only happens when we use the wpa_supplicant that supports P2P or if we use the iw tool to create the control P2P_DEVICE interface. Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-30ath10k: fix potential memory leak in ath10k_wmi_tlv_op_pull_fw_stats()Christian Lamparter
ath10k_wmi_tlv_op_pull_fw_stats() uses tb = ath10k_wmi_tlv_parse_alloc(...) function, which allocates memory. If any of the three error-paths are taken, this tb needs to be freed. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-29ath10k: add debug trace to rts/cts set functionBartosz Markowski
Align it with the cts protection call. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-29ath10k: set CTS protection VDEV param only if VDEV is upBartosz Markowski
The cts protection vdev parameter, in new QCA9377 TF2.0 firmware, requires bss peer to be created for the STATION vdev type. bss peer is being allocated by the firmware after vdev_start/_up commands. mac80211 may call the cts protection setup at any time, so the we needs to track the situation and defer the cts configuration to prevent firmware asserts, like below: [00]: 0x05020001 0x000015B3 0x0099ACE2 0x00955B31 [04]: 0x0099ACE2 0x00060730 0x00000004 0x00000000 [08]: 0x0044C754 0x00412C10 0x00000000 0x00409C54 [12]: 0x00000009 0x00000000 0x00952F6C 0x00952F77 [16]: 0x00952CC4 0x00910712 0x00000000 0x00000000 [20]: 0x4099ACE2 0x0040E858 0x00421254 0x004127F4 [24]: 0x8099B9B2 0x0040E8B8 0x00000000 0xC099ACE2 [28]: 0x800B75CB 0x0040E8F8 0x00000007 0x00005008 [32]: 0x809B048A 0x0040E958 0x00000010 0x00433B10 [36]: 0x809AFBBC 0x0040E9A8 0x0042BB74 0x0042BBBC [40]: 0x8091D252 0x0040E9C8 0x0042BBBC 0x00000001 [44]: 0x809FFA45 0x0040EA78 0x0043D3E4 0x0042C2C8 [48]: 0x809FCEF4 0x0040EA98 0x0043D3E4 0x00000001 [52]: 0x80911210 0x0040EAE8 0x00000010 0x004041D0 [56]: 0x80911154 0x0040EB28 0x00400000 0x00000000 Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-29ath10k: decrease num of peers supportBartosz Markowski
The correct number for QCA9377 chip is 33 VDEVs. This impacts also QCA6174 chip and it's max VDEV number. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-29ath10k: override CE5 config for QCA9377Bartosz Markowski
Similarly to QCA6174, QCA9377 requires the CE5 configuration to be available for other feature. Use the ath10k_pci_override_ce_config() for it as well. This is required for TF2.0 firmware. Previous FW revisions were working fine without this patch. Fixes: a70587b3389a ("ath10k: configure copy engine 5 for HTT messages") Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-29ath10k: fix IRAM banks number for QCA9377Bartosz Markowski
QCA9377 firmware shall alloc 4 IRAM banks Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 20:17:56 +0000