summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath10k/pci.c
AgeCommit message (Collapse)Author
2023-08-30Merge tag 'pci-v6.6-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Add locking to read/modify/write PCIe Capability Register accessors for Link Control and Root Control - Use pci_dev_id() when possible instead of manually composing ID from dev->bus->number and dev->devfn Resource management: - Move prototypes for __weak sysfs resource files to linux/pci.h to fix 'no previous prototype' warnings - Make more I/O port accesses depend on HAS_IOPORT - Use devm_platform_get_and_ioremap_resource() instead of open-coding platform_get_resource() followed by devm_ioremap_resource() Power management: - Ensure devices are powered up while accessing VPD - If device is powered-up, keep it that way while polling for PME - Only read PCI_PM_CTRL register when available, to avoid reading the wrong register and corrupting dev->current_state Virtualization: - Avoid Secondary Bus Reset on NVIDIA T4 GPUs Error handling: - Remove unused pci_disable_pcie_error_reporting() - Unexport pci_enable_pcie_error_reporting(), used only by aer.c - Unexport pcie_port_bus_type, used only by PCI core VGA: - Simplify and clean up typos in VGA arbiter Apple PCIe controller driver: - Initialize pcie->nvecs (number of available MSIs) before use Broadcom iProc PCIe controller driver: - Use of_property_read_bool() instead of low-level accessors for boolean properties Broadcom STB PCIe controller driver: - Assert PERST# when probing BCM2711 because some bootloaders don't do it Freescale i.MX6 PCIe controller driver: - Add .host_deinit() callback so we can clean up things like regulators on probe failure or driver unload Freescale Layerscape PCIe controller driver: - Add support for link-down notification so the endpoint driver can process LINK_DOWN events - Add suspend/resume support, including manual PME_Turn_off/PME_TO_Ack handshake - Save Link Capabilities during probe so they can be restored when handling a link-up event, since the controller loses the Link Width and Link Speed values during reset Intel VMD host bridge driver: - Fix disable of bridge windows during domain reset; previously we cleared the base/limit registers, which actually left the windows enabled Marvell MVEBU PCIe controller driver: - Remove unused busn member Microchip PolarFlare PCIe controller driver: - Fix interrupt bit definitions so the SEC and DED interrupt handlers work correctly - Make driver buildable as a module - Read FPGA MSI configuration parameters from hardware instead of hard-coding them Microsoft Hyper-V host bridge driver: - To avoid a NULL pointer dereference, skip MSI restore after hibernate if MSI/MSI-X hasn't been enabled NVIDIA Tegra194 PCIe controller driver: - Revert 'PCI: tegra194: Enable support for 256 Byte payload' because Linux doesn't know how to reduce MPS from to 256 to 128 bytes for endpoints below a switch (because other devices below the switch might already be operating), which leads to 'Malformed TLP' errors Qualcomm PCIe controller driver: - Add DT and driver support for interconnect bandwidth voting for 'pcie-mem' and 'cpu-pcie' interconnects - Fix broken SDX65 'compatible' DT property - Configure controller so MHI bus master clock will be switched off while in ASPM L1.x states - Use alignment restriction from EPF core in EPF MHI driver - Add Endpoint eDMA support - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driver - Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup latency - Add sa8775p DT binding and driver support Rockchip PCIe controller driver: - Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the upper 32 bits SiFive FU740 PCIe controller driver: - Set the supported number of MSI vectors so we can use all available MSI interrupts Synopsys DesignWare PCIe controller driver: - Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and dw_pcie_resume_noirq()) to be called by controller driver suspend/resume ops, and a controller callback to send PME_Turn_Off MicroSemi Switchtec management driver: - Add support for PCIe Gen5 devices Miscellaneous: - Reorder and compress to reduce size of struct pci_dev - Fix race in DOE destroy_work_on_stack() - Add stubs to avoid casts between incompatible function types - Explicitly include correct DT includes to untangle headers" * tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits) PCI: qcom-ep: Add ICC bandwidth voting support dt-bindings: PCI: qcom: ep: Add interconnects path PCI: qcom-ep: Treat unknown IRQ events as an error dt-bindings: PCI: qcom: Fix SDX65 compatible PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API PCI: epf-mhi: Use iATU for small transfers PCI: epf-mhi: Add support for SM8450 PCI: epf-mhi: Add eDMA support PCI: qcom-ep: Add eDMA support PCI: epf-mhi: Make use of the alignment restriction from EPF core PCI/PM: Only read PCI_PM_CTRL register when available PCI: qcom: Add support for sa8775p SoC dt-bindings: PCI: qcom: Add sa8775p compatible PCI: qcom-ep: Pass alignment restriction to the EPF core PCI: Simplify pcie_capability_clear_and_set_word() control flow PCI: Tidy config space save/restore messages PCI: Fix code formatting inconsistencies PCI: Fix typos in docs and comments PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos PCI: Simplify pci_dev_driver() ...
2023-08-25Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v6.6. No major changes, only smaller fixes and cleanups this time.
2023-08-25Fix nomenclature for USB and PCI wireless devicesAlan Stern
A mouse that uses a USB connection is called a "USB mouse" device (or "USB mouse" for short), not a "mouse USB" device. By analogy, a WiFi adapter that connects to the host computer via USB is a "USB wireless" device, not a "wireless USB" device. (The latter term more properly refers to a defunct Wireless USB specification, which described a technology for sending USB protocol messages over an ultra wideband radio link.) Similarly for a WiFi adapter card that plugs into a PCIe slot: It is a "PCIe wireless" device, not a "wireless PCIe" device. Rephrase the text in the kernel source where the word ordering is wrong. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/57da7c80-0e48-41b5-8427-884a02648f55@rowland.harvard.edu
2023-08-23wifi: ath10k: Fix a few spelling errorsJeff Johnson
Fix a few issues flagged by 'codespell'. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230822-ath_spelling-v1-1-8e2698759564@quicinc.com
2023-08-21wifi: ath10k: Use RMW accessors for changing LNKCTLIlpo Järvinen
Don't assume that only the driver would be accessing LNKCTL. ASPM policy changes can trigger write to LNKCTL outside of driver's control. Use RMW capability accessors which does proper locking to avoid losing concurrent updates to the register value. On restore, clear the ASPMC field properly. Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: 76d870ed09ab ("ath10k: enable ASPM") Link: https://lore.kernel.org/r/20230717120503.15276-11-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Kalle Valo <kvalo@kernel.org>
2023-04-12wifi: ath10k: Remove redundant pci_clear_masterCai Huoqing
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230323112613.7550-2-cai.huoqing@linux.dev
2022-11-17wifi: ath10k: Fix return value in ath10k_pci_init()Xiu Jianfeng
This driver is attempting to register to support two different buses. if either of these is successful then ath10k_pci_init() should return 0 so that hardware attached to the successful bus can be probed and supported. only if both of these are unsuccessful should ath10k_pci_init() return an errno. Fixes: 0b523ced9a3c ("ath10k: add basic skeleton to support ahb") Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221110061926.18163-1-xiujianfeng@huawei.com
2022-09-30Merge tag 'wireless-next-2022-09-30' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.1 Few stack changes and lots of driver changes in this round. brcmfmac has more activity as usual and it gets new hardware support. ath11k improves WCN6750 support and also other smaller features. And of course changes all over. Note: in early September wireless tree was merged to wireless-next to avoid some conflicts with mac80211 patches, this shouldn't cause any problems but wanted to mention anyway. Major changes: mac80211 - refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO) feature continues brcmfmac - support CYW43439 SDIO chipset - support BCM4378 on Apple platforms - support CYW89459 PCIe chipset rtw89 - more work to get rtw8852c supported - P2P support - support for enabling and disabling MSDU aggregation via nl80211 mt76 - tx status reporting improvements ath11k - cold boot calibration support on WCN6750 - Target Wake Time (TWT) debugfs support for STA interface - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - implement SRAM dump debugfs interface - enable threaded NAPI on all hardware - WoW support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz wcn36xx - add SNR from a received frame as a source of system entropy * tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits) wifi: rtl8xxxu: Improve rtl8xxxu_queue_select wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM wifi: rtl8xxxu: gen2: Enable 40 MHz channel width wifi: rtw89: 8852b: configure DLE mem wifi: rtw89: check DLE FIFO size with reserved size wifi: rtw89: mac: correct register of report IMR wifi: rtw89: pci: set power cut closed for 8852be wifi: rtw89: pci: add to do PCI auto calibration wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf wifi: rtw89: add DMA busy checking bits to chip info wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels wifi: rtw89: pci: mask out unsupported TX channels iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper wifi: iwlwifi: Track scan_cmd allocation size explicitly brcmfmac: Remove the call to "dtim_assoc" IOVAR brcmfmac: increase dcmd maximum buffer size brcmfmac: Support 89459 pcie brcmfmac: increase default max WOWL patterns to 16 cw1200: fix incorrect check to determine if no element is found in list ... ==================== Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-16wifi: ath10k: Fix miscellaneous spelling errorsJeff Johnson
Fix misspellings flagged by 'codespell'. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220909145300.19223-1-quic_jjohnson@quicinc.com
2022-05-02ath10k: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220429174643.196994-3-kuba@kernel.org
2021-07-02ath: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. While at it, some 'dma_set_mask()/dma_set_coherent_mask()' have been updated to a much less verbose 'dma_set_mask_and_coherent()'. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/9150bd6cde9ad592aff8ee3ad94dffa90b004e89.1624720959.git.christophe.jaillet@wanadoo.fr
2021-06-12ath10k: add missing error return code in ath10k_pci_probe()Yang Yingliang
When chip_id is not supported, the resources will be freed on path err_unsupported, these resources will also be freed when calling ath10k_pci_remove(), it will cause double free, so return -ENODEV when it doesn't support the device with wrong chip_id. Fixes: c0c378f9907c ("ath10k: remove target soc ps code") Fixes: 7505f7c3ec1d ("ath10k: create a chip revision whitelist") Fixes: f8914a14623a ("ath10k: restore QCA9880-AR1A (v1) detection") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210522105822.1091848-3-yangyingliang@huawei.com
2021-06-12ath10k: go to path err_unsupported when chip id is not supportedYang Yingliang
When chip id is not supported, it go to path err_unsupported to print the error message. Fixes: f8914a14623a ("ath10k: restore QCA9880-AR1A (v1) detection") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210522105822.1091848-2-yangyingliang@huawei.com
2020-12-17ath10k: prevent deinitializing NAPI twiceWen Gong
It happened "Kernel panic - not syncing: hung_task: blocked tasks" when test simulate crash and ifconfig down/rmmod meanwhile. Test steps: 1.Test commands, either can reproduce the hang for PCIe, SDIO and SNOC. echo soft > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;sleep 0.05;ifconfig wlan0 down echo soft > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;rmmod ath10k_sdio echo hw-restart > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash;rmmod ath10k_pci 2. dmesg: [ 5622.548630] ath10k_sdio mmc1:0001:1: simulating soft firmware crash [ 5622.655995] ieee80211 phy0: Hardware restart was requested [ 5776.355164] INFO: task shill:1572 blocked for more than 122 seconds. [ 5776.355687] INFO: task kworker/1:2:24437 blocked for more than 122 seconds. [ 5776.359812] Kernel panic - not syncing: hung_task: blocked tasks [ 5776.359836] CPU: 1 PID: 55 Comm: khungtaskd Tainted: G W 4.19.86 #137 [ 5776.359846] Hardware name: MediaTek krane sku176 board (DT) [ 5776.359855] Call trace: [ 5776.359868] dump_backtrace+0x0/0x170 [ 5776.359881] show_stack+0x20/0x2c [ 5776.359896] dump_stack+0xd4/0x10c [ 5776.359916] panic+0x12c/0x29c [ 5776.359937] hung_task_panic+0x0/0x50 [ 5776.359953] kthread+0x120/0x130 [ 5776.359965] ret_from_fork+0x10/0x18 [ 5776.359986] SMP: stopping secondary CPUs [ 5776.360012] Kernel Offset: 0x141ea00000 from 0xffffff8008000000 [ 5776.360026] CPU features: 0x0,2188200c [ 5776.360035] Memory Limit: none command "ifconfig wlan0 down" or "rmmod ath10k_sdio" will be blocked callstack of ifconfig: [<0>] __switch_to+0x120/0x13c [<0>] msleep+0x28/0x38 [<0>] ath10k_sdio_hif_stop+0x24c/0x294 [ath10k_sdio] [<0>] ath10k_core_stop+0x50/0x78 [ath10k_core] [<0>] ath10k_halt+0x120/0x178 [ath10k_core] [<0>] ath10k_stop+0x4c/0x8c [ath10k_core] [<0>] drv_stop+0xe0/0x1e4 [mac80211] [<0>] ieee80211_stop_device+0x48/0x54 [mac80211] [<0>] ieee80211_do_stop+0x678/0x6f8 [mac80211] [<0>] ieee80211_stop+0x20/0x30 [mac80211] [<0>] __dev_close_many+0xb8/0x11c [<0>] __dev_change_flags+0xe0/0x1d0 [<0>] dev_change_flags+0x30/0x6c [<0>] devinet_ioctl+0x370/0x564 [<0>] inet_ioctl+0xdc/0x304 [<0>] sock_do_ioctl+0x50/0x288 [<0>] compat_sock_ioctl+0x1b4/0x1aac [<0>] __se_compat_sys_ioctl+0x100/0x26fc [<0>] __arm64_compat_sys_ioctl+0x20/0x2c [<0>] el0_svc_common+0xa4/0x154 [<0>] el0_svc_compat_handler+0x2c/0x38 [<0>] el0_svc_compat+0x8/0x18 [<0>] 0xffffffffffffffff callstack of rmmod: [<0>] __switch_to+0x120/0x13c [<0>] msleep+0x28/0x38 [<0>] ath10k_sdio_hif_stop+0x294/0x31c [ath10k_sdio] [<0>] ath10k_core_stop+0x50/0x78 [ath10k_core] [<0>] ath10k_halt+0x120/0x178 [ath10k_core] [<0>] ath10k_stop+0x4c/0x8c [ath10k_core] [<0>] drv_stop+0xe0/0x1e4 [mac80211] [<0>] ieee80211_stop_device+0x48/0x54 [mac80211] [<0>] ieee80211_do_stop+0x678/0x6f8 [mac80211] [<0>] ieee80211_stop+0x20/0x30 [mac80211] [<0>] __dev_close_many+0xb8/0x11c [<0>] dev_close_many+0x70/0x100 [<0>] dev_close+0x4c/0x80 [<0>] cfg80211_shutdown_all_interfaces+0x50/0xcc [cfg80211] [<0>] ieee80211_remove_interfaces+0x58/0x1a0 [mac80211] [<0>] ieee80211_unregister_hw+0x40/0x100 [mac80211] [<0>] ath10k_mac_unregister+0x1c/0x44 [ath10k_core] [<0>] ath10k_core_unregister+0x38/0x7c [ath10k_core] [<0>] ath10k_sdio_remove+0x8c/0xd0 [ath10k_sdio] [<0>] sdio_bus_remove+0x48/0x108 [<0>] device_release_driver_internal+0x138/0x1ec [<0>] driver_detach+0x6c/0xa8 [<0>] bus_remove_driver+0x78/0xa8 [<0>] driver_unregister+0x30/0x50 [<0>] sdio_unregister_driver+0x28/0x34 [<0>] cleanup_module+0x14/0x6bc [ath10k_sdio] [<0>] __arm64_sys_delete_module+0x1e0/0x22c [<0>] el0_svc_common+0xa4/0x154 [<0>] el0_svc_compat_handler+0x2c/0x38 [<0>] el0_svc_compat+0x8/0x18 [<0>] 0xffffffffffffffff SNOC: [ 647.156863] Call trace: [ 647.162166] [<ffffff80080855a4>] __switch_to+0x120/0x13c [ 647.164512] [<ffffff800899d8b8>] __schedule+0x5ec/0x798 [ 647.170062] [<ffffff800899dad8>] schedule+0x74/0x94 [ 647.175050] [<ffffff80089a0848>] schedule_timeout+0x314/0x42c [ 647.179874] [<ffffff80089a0a14>] schedule_timeout_uninterruptible+0x34/0x40 [ 647.185780] [<ffffff80082a494>] msleep+0x28/0x38 [ 647.192546] [<ffffff800117ec4c>] ath10k_snoc_hif_stop+0x4c/0x1e0 [ath10k_snoc] [ 647.197439] [<ffffff80010dfbd8>] ath10k_core_stop+0x50/0x7c [ath10k_core] [ 647.204652] [<ffffff80010c8f48>] ath10k_halt+0x114/0x16c [ath10k_core] [ 647.211420] [<ffffff80010cad68>] ath10k_stop+0x4c/0x88 [ath10k_core] [ 647.217865] [<ffffff8000fdbf54>] drv_stop+0x110/0x244 [mac80211] [ 647.224367] [<ffffff80010147ac>] ieee80211_stop_device+0x48/0x54 [mac80211] [ 647.230359] [<ffffff8000ff3eec>] ieee80211_do_stop+0x6a4/0x73c [mac80211] [ 647.237033] [<ffffff8000ff4500>] ieee80211_stop+0x20/0x30 [mac80211] [ 647.243942] [<ffffff80087e39b8>] __dev_close_many+0xa0/0xfc [ 647.250435] [<ffffff80087e3888>] dev_close_many+0x70/0x100 [ 647.255651] [<ffffff80087e3a60>] dev_close+0x4c/0x80 [ 647.261244] [<ffffff8000f1ba54>] cfg80211_shutdown_all_interfaces+0x44/0xcc [cfg80211] [ 647.266383] [<ffffff8000ff3fdc>] ieee80211_remove_interfaces+0x58/0x1b4 [mac80211] [ 647.274128] [<ffffff8000fda540>] ieee80211_unregister_hw+0x50/0x120 [mac80211] [ 647.281659] [<ffffff80010ca314>] ath10k_mac_unregister+0x1c/0x44 [ath10k_core] [ 647.288839] [<ffffff80010dfc94>] ath10k_core_unregister+0x48/0x90 [ath10k_core] [ 647.296027] [<ffffff800117e598>] ath10k_snoc_remove+0x5c/0x150 [ath10k_snoc] [ 647.303229] [<ffffff80085625fc>] platform_drv_remove+0x28/0x50 [ 647.310517] [<ffffff80085601a4>] device_release_driver_internal+0x114/0x1b8 [ 647.316257] [<ffffff80085602e4>] driver_detach+0x6c/0xa8 [ 647.323021] [<ffffff800855e5b8>] bus_remove_driver+0x78/0xa8 [ 647.328571] [<ffffff800856107c>] driver_unregister+0x30/0x50 [ 647.334213] [<ffffff8008562674>] platform_driver_unregister+0x1c/0x28 [ 647.339876] [<ffffff800117fefc>] cleanup_module+0x1c/0x120 [ath10k_snoc] [ 647.346196] [<ffffff8008143ab8>] SyS_delete_module+0x1dc/0x22c PCIe: [ 615.392770] rmmod D 0 3523 3458 0x00000080 [ 615.392777] Call Trace: [ 615.392784] __schedule+0x617/0x7d3 [ 615.392791] ? __mod_timer+0x263/0x35c [ 615.392797] schedule+0x62/0x72 [ 615.392803] schedule_timeout+0x8d/0xf3 [ 615.392809] ? run_local_timers+0x6b/0x6b [ 615.392814] msleep+0x1b/0x22 [ 615.392824] ath10k_pci_hif_stop+0x68/0xd6 [ath10k_pci] [ 615.392844] ath10k_core_stop+0x44/0x67 [ath10k_core] [ 615.392859] ath10k_halt+0x102/0x153 [ath10k_core] [ 615.392873] ath10k_stop+0x38/0x75 [ath10k_core] [ 615.392893] drv_stop+0x9a/0x13c [mac80211] [ 615.392915] ieee80211_do_stop+0x772/0x7cd [mac80211] [ 615.392937] ieee80211_stop+0x1a/0x1e [mac80211] [ 615.392945] __dev_close_many+0x9e/0xf0 [ 615.392952] dev_close_many+0x62/0xe8 [ 615.392958] dev_close+0x54/0x7d [ 615.392975] cfg80211_shutdown_all_interfaces+0x6e/0xa5 [cfg80211] [ 615.393021] ieee80211_remove_interfaces+0x52/0x1aa [mac80211] [ 615.393049] ieee80211_unregister_hw+0x54/0x136 [mac80211] [ 615.393068] ath10k_mac_unregister+0x19/0x4a [ath10k_core] [ 615.393091] ath10k_core_unregister+0x39/0x7e [ath10k_core] [ 615.393104] ath10k_pci_remove+0x3d/0x7f [ath10k_pci] [ 615.393117] pci_device_remove+0x41/0xa6 [ 615.393129] device_release_driver_internal+0x123/0x1ec [ 615.393140] driver_detach+0x60/0x90 [ 615.393152] bus_remove_driver+0x72/0x9f [ 615.393164] pci_unregister_driver+0x1e/0x87 [ 615.393177] SyS_delete_module+0x1d7/0x277 [ 615.393188] do_syscall_64+0x6b/0xf7 [ 615.393199] entry_SYSCALL_64_after_hwframe+0x41/0xa6 The test command run simulate_fw_crash firstly and it call into ath10k_sdio_hif_stop from ath10k_core_restart, then napi_disable is called and bit NAPI_STATE_SCHED is set. After that, function ath10k_sdio_hif_stop is called again from ath10k_stop by command "ifconfig wlan0 down" or "rmmod ath10k_sdio", then command blocked. It is blocked by napi_synchronize, napi_disable will set bit with NAPI_STATE_SCHED, and then napi_synchronize will enter dead loop becuase bit NAPI_STATE_SCHED is set by napi_disable. function of napi_synchronize static inline void napi_synchronize(const struct napi_struct *n) { if (IS_ENABLED(CONFIG_SMP)) while (test_bit(NAPI_STATE_SCHED, &n->state)) msleep(1); else barrier(); } function of napi_disable void napi_disable(struct napi_struct *n) { might_sleep(); set_bit(NAPI_STATE_DISABLE, &n->state); while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) msleep(1); while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) msleep(1); hrtimer_cancel(&n->timer); clear_bit(NAPI_STATE_DISABLE, &n->state); } Add flag for it avoid the hang and crash. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 Tested-on: WCN3990 hw1.0 SNOC hw1.0 WLAN.HL.3.1-01307.1-QCAHLSWMTPL-2 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1598617348-2325-1-git-send-email-wgong@codeaurora.org
2020-12-12ath10k: add atomic protection for device recoveryWen Gong
When it has more than one restart_work queued meanwhile, the 2nd restart_work is very easy to break the 1st restart work and lead recovery fail. Add a flag to allow only one restart work running untill device successfully recovered. It already has flag ATH10K_FLAG_CRASH_FLUSH, but it can not use this flag again, because it is clear in ath10k_core_start. The function ieee80211_reconfig(called by ieee80211_restart_work) of mac80211 do many things and drv_start(call to ath10k_core_start) is 1st thing, when drv_start complete, it does not mean restart complete. So it add new flag and clear it in ath10k_reconfig_complete, because it is the last thing called from drv_reconfig_complete of function ieee80211_reconfig, after it, the restart process finished. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746bead6a0-d5e97c66-dedd-4b92-810e-c2e4840fafc9-000000@us-west-2.amazonses.com
2020-10-28ath10k: ath10k_pci_init_irq(): workaround for checkpatch fallthrough warningKalle Valo
Latest checkpatch complains about use of fall-through comment. But as this is a switch statement just reword the comment to workaround the problem. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1603802288-21158-2-git-send-email-kvalo@codeaurora.org
2020-08-18Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.10. Major changes: ath11k * add support for QCA6390 PCI devices wcn36xx * add support for TX ack ath9k * add support for NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 to improve PTK0 rekeying
2020-07-20ath10k: Fix NULL pointer dereference in AHB device probeHauke Mehrtens
This fixes a NULL pointer dereference in the probe path for AHB devices. There attr parameter in the ath10k_ce_alloc_pipe() function is not initialized, but accessed. This function is called by ath10k_pci_setup_resource() which is called by ath10k_ahb_probe(). The struct ath10k_pci is also used for AHB devices and not only for PCI devices. The initialization of the new members of struct ath10k_pci is moved to ath10k_pci_setup_resource() which is used by the PCI and the AHB code. This also fixes a use after free bug in ath10k_pci_remove() when ar_pci is accessed after ath10k_core_destroy() was called, which calls ieee80211_free_hw() and frees this memory. This fixes the following bug seen with backports-5.8-rc2 on OpenWrt on a IPQ4019 device: [ 11.117462] 8<--- cut here --- [ 11.117494] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 11.119510] pgd = f377fd58 [ 11.127657] [00000000] *pgd=8e9a0835, *pte=00000000, *ppte=00000000 [ 11.130206] Internal error: Oops: 17 [#1] SMP ARM [ 11.136339] Modules linked in: ath10k_pci(+) ath10k_core ath xt_state xt_nat xt_conntrack xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD pppox ppp_generic nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_multiport xt_mark xt_mac xt_limit xt_comment xt_TCPMSS xt_LOG slhc nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_filter ip_tables crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom gpio_button_hotplug [ 11.174355] CPU: 2 PID: 257 Comm: kmodloader Not tainted 5.4.51 #0 [ 11.196585] Hardware name: Generic DT based system [ 11.202746] PC is at ath10k_ce_alloc_pipe+0x58/0x180 [ath10k_core] [ 11.207459] LR is at ath10k_pci_alloc_pipes+0x94/0xc8 [ath10k_pci] [ 11.213600] pc : [<bf2c96cc>] lr : [<bf2fbf98>] psr: 80000013 [ 11.219760] sp : cea0dc90 ip : cf4001f0 fp : 00000001 [ 11.225923] r10: 00000000 r9 : 00000018 r8 : ce4963b4 [ 11.231133] r7 : 00000000 r6 : ce491ea0 r5 : 00000000 r4 : ce4963b4 [ 11.236342] r3 : 0004a000 r2 : 0004a000 r1 : bf2d0d70 r0 : 00000006 [ 11.242942] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 11.249452] Control: 10c5387d Table: 8e9c006a DAC: 00000051 [ 11.256656] Process kmodloader (pid: 257, stack limit = 0xaba286ca) [ 11.262386] Stack: (0xcea0dc90 to 0xcea0e000) [ 11.268462] dc80: 00000000 ce49629c ce491ea0 ce4963bc [ 11.272984] dca0: ce495ea0 bf2fbf98 00000002 ce4963a8 ce495ea0 00000000 ce491ea0 cf95d800 [ 11.281142] dcc0: cf95d810 cf95d810 00000001 bf2fc854 00000000 cf95d800 bf300748 ce495ea0 [ 11.289304] dce0: ce491ea0 d1300000 cf95d800 bf2fde8c 00000000 00000001 ce49cea0 00000000 [ 11.297462] dd00: 00000000 00000000 bf3010a0 cf95d810 bf3010a0 c0b61580 00000000 00000000 [ 11.305624] dd20: bf3010a0 0000000b c0b04e48 c06110c8 c0b61588 cf95d810 c0b61580 c060f740 [ 11.313781] dd40: cf95d810 00000000 bf3010a0 00000000 00000000 ce49d2a4 bf301100 c060fc90 [ 11.321943] dd60: 00000000 bf3010a0 cf95d810 c060fcf0 cf95d810 bf3010a0 c060fc98 c060dca4 [ 11.330101] dd80: cf809d58 cf952cb4 bf3010a0 ce967900 c0b1f2c8 c060ec28 bf3007b8 bf301038 [ 11.338263] dda0: bf3010a0 bf3010a0 c0b2d4d4 ffffe000 bf304000 c0610278 c0b04e48 c0b2d4d4 [ 11.346422] ddc0: ffffe000 bf2fe2b4 c0b04e48 bf30403c c0b04e48 c0302764 8040003f 00000001 [ 11.354582] dde0: 38e38e39 ce513580 c0b2cb50 cf801e00 cffbc6ac ce513600 cf801e00 cffbc6ac [ 11.362740] de00: 8040003e ce49d280 00000001 c0428d54 00000001 cf801e00 cffbc6ac ce513580 [ 11.370900] de20: ce49d280 0e391998 bf301100 ce49d340 d12d2000 ce49d280 00000001 c0398c2c [ 11.379061] de40: 00000001 cea0df34 cea0df34 00000001 d12d2000 c039ae48 bf30110c 00007fff [ 11.387221] de60: bf301100 c0398044 cf804028 bf301148 c0397674 bf30126c c08ee5c0 c08ee70c [ 11.395380] de80: bf30110c c0b04e48 c08ee518 00000000 c08ee570 c0b04e48 ce513600 fffff000 [ 11.403540] dea0: 00000001 ce513580 0000000d 0000000d 00000000 00000000 00000000 00000000 [ 11.411698] dec0: 00000000 00000000 6e72656b 00006c65 00000000 00000000 00000000 00000000 [ 11.419858] dee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 11.428018] df00: 00000000 0e391998 00000000 0000c610 d12de610 00000000 0062c620 ffffe000 [ 11.436180] df20: 000129d1 00000051 00000000 c039b228 00000000 d12d7afd d12d8e80 d12d2000 [ 11.444337] df40: 0000c610 d12de0e8 d12ddfa8 d12dab74 00009000 00009570 00003a2c 00009cae [ 11.452498] df60: 00000000 00000000 00000000 00003a1c 0000001e 0000001f 00000018 00000000 [ 11.460656] df80: 00000010 00000000 00000000 00000000 00000003 00000080 c0301204 cea0c000 [ 11.468817] dfa0: 00000080 c0301000 00000000 00000000 00620010 0000c610 000129d1 00000014 [ 11.476975] dfc0: 00000000 00000000 00000003 00000080 0000c610 00000000 b6fc1d20 00000000 [ 11.485137] dfe0: bef0ad14 bef0acf8 00011e14 b6f74c94 60000010 00620010 00000000 00000000 [ 11.493390] [<bf2c96cc>] (ath10k_ce_alloc_pipe [ath10k_core]) from [<bf2fbf98>] (ath10k_pci_alloc_pipes+0x94/0xc8 [ath10k_pci]) [ 11.501498] [<bf2fbf98>] (ath10k_pci_alloc_pipes [ath10k_pci]) from [<bf2fc854>] (ath10k_pci_setup_resource+0xb8/0xf0 [ath10k_pci]) [ 11.512773] [<bf2fc854>] (ath10k_pci_setup_resource [ath10k_pci]) from [<bf2fde8c>] (ath10k_ahb_probe+0x32c/0x670 [ath10k_pci]) [ 11.524566] [<bf2fde8c>] (ath10k_ahb_probe [ath10k_pci]) from [<c06110c8>] (platform_drv_probe+0x34/0x70) [ 11.536016] [<c06110c8>] (platform_drv_probe) from [<c060f740>] (really_probe+0x1f0/0x358) [ 11.545729] [<c060f740>] (really_probe) from [<c060fc90>] (device_driver_attach+0x58/0x60) [ 11.553886] [<c060fc90>] (device_driver_attach) from [<c060fcf0>] (__driver_attach+0x58/0xcc) [ 11.562134] [<c060fcf0>] (__driver_attach) from [<c060dca4>] (bus_for_each_dev+0x68/0x8c) [ 11.570731] [<c060dca4>] (bus_for_each_dev) from [<c060ec28>] (bus_add_driver+0x1c8/0x1d8) [ 11.578886] [<c060ec28>] (bus_add_driver) from [<c0610278>] (driver_register+0x74/0x108) [ 11.587060] [<c0610278>] (driver_register) from [<bf2fe2b4>] (ath10k_ahb_init+0x18/0x38 [ath10k_pci]) [ 11.595320] [<bf2fe2b4>] (ath10k_ahb_init [ath10k_pci]) from [<bf30403c>] (init_module+0x3c/0x1000 [ath10k_pci]) [ 11.604432] [<bf30403c>] (init_module [ath10k_pci]) from [<c0302764>] (do_one_initcall+0x84/0x1d8) [ 11.614657] [<c0302764>] (do_one_initcall) from [<c0398c2c>] (do_init_module+0x5c/0x228) [ 11.623421] [<c0398c2c>] (do_init_module) from [<c039ae48>] (load_module+0x1fc8/0x224c) [ 11.631663] [<c039ae48>] (load_module) from [<c039b228>] (sys_init_module+0x15c/0x17c) [ 11.639390] [<c039b228>] (sys_init_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 11.647370] Exception stack(0xcea0dfa8 to 0xcea0dff0) [ 11.655615] dfa0: 00000000 00000000 00620010 0000c610 000129d1 00000014 [ 11.660569] dfc0: 00000000 00000000 00000003 00000080 0000c610 00000000 b6fc1d20 00000000 [ 11.668725] dfe0: bef0ad14 bef0acf8 00011e14 b6f74c94 [ 11.676886] Code: e1c321d4 e0433002 e0232397 e5843014 (e5953000) [ 11.681958] ---[ end trace 8f35917de2e76854 ]--- Fixes: 521fc37be3d8 ("ath10k: Avoid override CE5 configuration for QCA99X0 chipsets") Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq40xx/ map-ac2200] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200714205802.17688-1-hauke@hauke-m.de
2020-06-23ath10k: pci: fix memcpy size of bmi responseZekun Shen
A compromized ath10k peripheral is able to control the size argument of memcpy in ath10k_pci_hif_exchange_bmi_msg. The min result from previous line is not used as the size argument for memcpy. Instead, xfer.resp_len comes from untrusted stream dma input. The value comes from "nbytes" in ath10k_pci_bmi_recv_data, which is set inside _ath10k_ce_completed_recv_next_nolock with the line nbytes = __le16_to_cpu(sdesc.nbytes); sdesc is a stream dma region which device can write to. Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200616132544.17478-1-bruceshenzk@gmail.com
2020-05-05ath10k: Avoid override CE5 configuration for QCA99X0 chipsetsMaharaja Kennadyrajan
As the exisiting CE configurations are defined in global, there are the chances of QCA99X0 family chipsets CE configurations are getting changed by the ath10k_pci_override_ce_config() function. The override will be hit and CE5 configurations will be changed, when the user bring up the QCA99X0 chipsets along with QCA6174 or QCA9377 chipset. (Bring up QCA99X0 family chipsets after QCA6174 or QCA9377). Hence, fixing this issue by moving the global CE configuration to radio specific CE configuration. Tested hardware: QCA9888 & QCA6174 Tested firmware: 10.4-3.10-00047 & WLAN.RM.4.4.1.c3-00058 Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1587649759-14381-1-git-send-email-mkenna@codeaurora.org
2020-04-06ath10k: Fix the race condition in firmware dump work queueMaharaja Kennadyrajan
There is a race condition, when the user writes 'hw-restart' and 'hard' in the simulate_fw_crash debugfs file without any delay. In the above scenario, the firmware dump work queue(scheduled by 'hard') should be handled gracefully, while the target is in the 'hw-restart'. Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00044 Co-developed-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585213077-28439-1-git-send-email-mkenna@codeaurora.org
2020-01-26ath10k: pci: Fix comment on ath10k_pci_dump_memory_sramBryan O'Donoghue
The description of ath10k_pci_dump_memory_sram() is inaccurate, an error can never be returned, it is always the length. Update the comment to reflect. Fixes: 219cc084c6706 ("ath10k: add memory dump support QCA9984") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26ath10k: pci: Only dump ATH10K_MEM_REGION_TYPE_IOREG when safeBryan O'Donoghue
ath10k_pci_dump_memory_reg() will try to access memory of type ATH10K_MEM_REGION_TYPE_IOREG however, if a hardware restart is in progress this can crash a system. Individual ioread32() time has been observed to jump from 15-20 ticks to > 80k ticks followed by a secure-watchdog bite and a system reset. Work around this corner case by only issuing the read transaction when the driver state is ATH10K_STATE_ON. Tested-on: QCA9988 PCI 10.4-3.9.0.2-00044 Fixes: 219cc084c6706 ("ath10k: add memory dump support QCA9984") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-02ath10k: restore QCA9880-AR1A (v1) detectionChristian Lamparter
This patch restores the old behavior that read the chip_id on the QCA988x before resetting the chip. This needs to be done in this order since the unsupported QCA988x AR1A chips fall off the bus when resetted. Otherwise the next MMIO Op after the reset causes a BUS ERROR and panic. Cc: stable@vger.kernel.org Fixes: 1a7fecb766c8 ("ath10k: reset chip before reading chip_id in probe") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-17ath10k: use ath10k_pci_soc_ functions for all warm_reset instancesTomislav Požega
Use ath10k_pci_soc_read32 / ath10k_pci_soc_write32 functions for the rest of warm_reset functions. Until now these have been used only for ath10k_pci_warm_reset_si0, but since they already exist it makes sense to simplify code a bit. Runtime tested with QCA9862. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-28ath10k: pci: remove unnecessary castsKalle Valo
Fixes checkpatch warnings: drivers/net/wireless/ath/ath10k/pci.c:926: unnecessary cast may hide bugs, see http://c-faq.com/malloc/mallocnocast.html drivers/net/wireless/ath/ath10k/pci.c:1072: unnecessary cast may hide bugs, see http://c-faq.com/malloc/mallocnocast.html While at it, also remove unnecessary initialisation of data_buf variable in both cases. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25ath10k: fix fw crash by moving chip reset after napi disabledMiaoqing Pan
On SMP platform, when continuously running wifi up/down, the napi poll can be scheduled during chip reset, which will call ath10k_pci_has_fw_crashed() to check the fw status. But in the reset period, the value from FW_INDICATOR_ADDRESS register will return 0xdeadbeef, which also be treated as fw crash. Fix the issue by moving chip reset after napi disabled. ath10k_pci 0000:01:00.0: firmware crashed! (guid 73b30611-5b1e-4bdd-90b4-64c81eb947b6) ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 ath10k_pci 0000:01:00.0: failed to get memcpy hi address for firmware address 4: -16 ath10k_pci 0000:01:00.0: failed to read firmware dump area: -16 ath10k_pci 0000:01:00.0: Copy Engine register dump: ath10k_pci 0000:01:00.0: [00]: 0x0004a000 0 0 0 0 ath10k_pci 0000:01:00.0: [01]: 0x0004a400 0 0 0 0 ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 0 0 ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 0 ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 0 ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 0 ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 0 ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 0 1 0 ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 0 0 ath10k_pci 0000:01:00.0: [09]: 0x0004c400 0 0 0 0 ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 0 ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 0 Tested HW: QCA9984,QCA9887,WCN3990 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-27Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 5.3. Major changes: ath10k * enable SDIO support, first one being QCA6174 hw3.2
2019-04-29ath10k: perform crash dump collection in workqueueBrian Norris
Commit 25733c4e67df ("ath10k: pci: use mutex for diagnostic window CE polling") introduced a regression where we try to sleep (grab a mutex) in an atomic context: [ 233.602619] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254 [ 233.602626] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0 [ 233.602636] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.1.0-rc2 #4 [ 233.602642] Hardware name: Google Scarlet (DT) [ 233.602647] Call trace: [ 233.602663] dump_backtrace+0x0/0x11c [ 233.602672] show_stack+0x20/0x28 [ 233.602681] dump_stack+0x98/0xbc [ 233.602690] ___might_sleep+0x154/0x16c [ 233.602696] __might_sleep+0x78/0x88 [ 233.602704] mutex_lock+0x2c/0x5c [ 233.602717] ath10k_pci_diag_read_mem+0x68/0x21c [ath10k_pci] [ 233.602725] ath10k_pci_diag_read32+0x48/0x74 [ath10k_pci] [ 233.602733] ath10k_pci_dump_registers+0x5c/0x16c [ath10k_pci] [ 233.602741] ath10k_pci_fw_crashed_dump+0xb8/0x548 [ath10k_pci] [ 233.602749] ath10k_pci_napi_poll+0x60/0x128 [ath10k_pci] [ 233.602757] net_rx_action+0x140/0x388 [ 233.602766] __do_softirq+0x1b0/0x35c [...] ath10k_pci_fw_crashed_dump() is called from NAPI contexts, and firmware memory dumps are retrieved using the diag memory interface. A simple reproduction case is to run this on QCA6174A / WLAN.RM.4.4.1-00132-QCARMSWP-1, which happens to be a way to b0rk the firmware: dd if=/sys/kernel/debug/ieee80211/phy0/ath10k/mem_value bs=4K count=1 of=/dev/null (NB: simulated firmware crashes, via debugfs, don't trigger firmware dumps.) The fix is to move the crash-dump into a workqueue context, and avoid relying on 'data_lock' for most mutual exclusion. We only keep using it here for protecting 'fw_crash_counter', while the rest of the coredump buffers are protected by a new 'dump_mutex'. I've tested the above with simulated firmware crashes (debugfs 'reset' file), real firmware crashes (the 'dd' command above), and a variety of reboot and suspend/resume configurations on QCA6174A. Reported here: http://lkml.kernel.org/linux-wireless/20190325202706.GA68720@google.com Fixes: 25733c4e67df ("ath10k: pci: use mutex for diagnostic window CE polling") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-23ath10k: initialise struct ath10k_bus params to zeroKalle Valo
This way we don't need to set every variable and give them to default, which is zero. This is also safer in case we forgot to initalise a new field in some of the bus modules. Compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-20ath10k: switch to use SPDX license identifiersKalle Valo
Use SPDX identifiers everywhere in ath10k. Makefile was incorrectly marked in commit b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license"), fix that as well. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-11ath10k: enable Factory Test Mode for WCN3990Rakesh Pillai
The support to put WCN3990 firmware into Factory test mode is not present currently. The WCN3990 firmware can operate in Factory test mode based on the mode it receives in the wlan enable message from the host driver. When the host driver is started in testmode send the operating mode as UTF mode, to the WCN3990 firmware, in the wlan enable message to start the firmware in Factory test mode. Tested on: WCN3990 Tested FW: WLAN.HL.2.0-01192-QCAHLSWMTPLZ-1. Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-11ath10k: pci: use mutex for diagnostic window CE pollingBrian Norris
The DIAG copy engine is only used via polling, but it holds a spinlock with softirqs disabled. Each iteration of our read/write loops can theoretically take 20ms (two 10ms timeout loops), and this loop can be run an unbounded number of times while holding the spinlock -- dependent on the request size given by the caller. As of commit 39501ea64116 ("ath10k: download firmware via diag Copy Engine for QCA6174 and QCA9377."), we transfer large chunks of firmware memory using this mechanism. With large enough firmware segments, this becomes an exceedingly long period for disabling soft IRQs. For example, with a 500KiB firmware segment, in testing QCA6174A, I see 200 loop iterations of about 50-100us each, which can total about 10-20ms. In reality, we don't really need to block softirqs for this duration. The DIAG CE is only used in polling mode, and we only need to hold ce_lock to make sure any CE bookkeeping is done without screwing up another CE. Otherwise, we only need to ensure exclusion between ath10k_pci_diag_{read,write}_mem() contexts. This patch moves to use fine-grained locking for the shared ce_lock, while adding a new mutex just to ensure mutual exclusion of diag read/write operations. Tested on QCA6174A, firmware version WLAN.RM.4.4.1-00132-QCARMSWPZ-1. Fixes: 39501ea64116 ("ath10k: download firmware via diag Copy Engine for QCA6174 and QCA9377.") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-11ath10k: disable interface pause wow config for integrated chipsetGovind Singh
wow pause iface config controls the PCI D0/D3-WOW cases for pcie bus state. Firmware does not expects WOW_IFACE_PAUSE_ENABLED config for bus/link that cannot be suspended ex:snoc and does not trigger common subsystem shutdown. Disable interface pause wow config for integrated chipset(WCN3990) for correct WOW configuration in the firmware. Testing: Tested on WCN3990 HW. Tested FW: WLAN.HL.2.0-01192-QCAHLSWMTPLZ-1. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-08Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 5.1. Major changes: ath10k * change QMI interface to support the new (and backwards incompatible) interface from HL3.1 and used in recent HL2.0 branch firmware releases ath * add new country codes for US
2019-02-04ath10k: fix S5 power consumption issue for QCA9377Yu Wang
After system entering S5 (shut down but system still providing power to QCA9377) on Ubuntu platform, power consumption of QCA9377 is 69mA, which is too high. The root cause is pci_soft_reset is not set for QCA9377 during pci probe. To fix this issue, set 'pci_soft_reset' to 'th10k_pci_warm_reset', and then the power consumption drops to a normal value(10mA). Verified on Dell Ubuntu platform with firmware: WLAN.TF.1.0-00002-QCATFSWPZ-5 Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-10-13ath10k: allocate small size dma memory in ath10k_pci_diag_write_memCarl Huang
ath10k_pci_diag_write_mem may allocate big size of the dma memory based on the parameter nbytes. Take firmware diag download as example, the biggest size is about 500K. In some systems, the allocation is likely to fail because it can't acquire such a large contiguous dma memory. The fix is to allocate a small size dma memory. In the loop, driver copies the data to the allocated dma memory and writes to the destination until all the data is written. Tested with QCA6174 PCI with firmware-6.bin_WLAN.RM.4.4.1-00119-QCARMSWP-1, this also affects QCA9377 PCI. Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chomium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-06ath10k: add device type enum to ath10k_bus_paramsErik Stromdahl
Add dev_type parameter to struct ath10k_bus_params. The dev type specifies if the device is a high latency device (usb and sdio) or low latency device (pci, ahb and snoc) The setup of high latency chips is sometimes different than for chips using low latency interfaces. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-06ath10k: add struct ath10k_bus_paramsErik Stromdahl
This struct is used as argument to ath10k_core_register in order to make it easier to add more bus parameters in the future. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-06ath10k: support to access target space below 1M for qca6174 and qca9377Carl Huang
To download firmware via diag interface, driver needs to write the target memory space below 1M. It means the bit20 should be zero for the converted address if the target memory space is below 1M. Otherwise, bit20 is one if the target address is larger or equal to 1M space. As downloading firmware via diag interface is only required for qca6174 and qca9377, a new specific function is introduced to convert the target address to ce address: ath10k_pci_qca6174_targ_cpu_to_ce_addri(). This function supports to convert any target address to ce address. It's tested with QCA6174 hw3.2 and firmware-6.bin_WLAN.RM.4.4.1-00111-QCARMSWP-1. QCA9377 is also affected. Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-06ath10k: optimize pci diag mem read & write operationsCarl Huang
Delay 1ms is too long for both diag read and write operations. This is observed when writing a big memory buffer to target or reading a big memory buffer from target. Take writing/reading 512k bytes as example, the delay itself is 256ms as the maximum length of every write/read is 2k size. Reduce the delay to 50us for read and write operations. Take the ath10k_pci_targ_cpu_to_ce_addr() out of loop and put it in the beginning of the loop for ath10k_pci_diag_read_mem(). The ath10k_pci_targ_cpu_to_ce_addr() is to convert the address from target cpu's perspective to CE's perspective, so it makes no sense to convert a CE's perspective address again in the loop. It's a wrong implementation but happens to work. If the target address is below 1M space, then the convert in the loop from the second time becomes wrong because the previously converted address is larger than 1M. The counterpart ath10k_pci_diag_write_mem() has the correct implementation. With this change, ath10k_pci_diage_read_mem() works correctly no matter the target address is below 1M or above 1M. It's tested with QCA6174 hw3.2 and firmware-6.bin_WLAN.RM.4.4.1-00111-QCARMSWP-1. QCA9377 is also affected. Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-06ath10k: enable pktlog for WCN3990 targetGovind Singh
WCN3990 target uses separate htc service for pktlog. Add pktlog service request and support for pktlog rx path handling. Testing: Tested on WCN3990 and QCA6174 HW. Tested FW: WLAN.HL.2.0-01192-QCAHLSWMTPLZ-1, WLAN.RM.4.4.1-00109-QCARMSWPZ-1 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-06ath10k: introduce CE_ATTR_POLL attribute for polling pipeGovind Singh
Existing copy engine interrupt enable logic assumes that last CE is using polling mode and due to this interrupt for last copy engine are always disabled. WCN3990 uses last CE for pktlog and interrupt remains disabled with existing logic. To mitigate this issue, introduce CE_ATTR_POLL flag and control the interrupt based on the flag which can be set in ce_attr. Testing: Tested on WCN3990 and QCA6174 HW. Tested FW: WLAN.HL.2.0-01192-QCAHLSWMTPLZ-1, WLAN.RM.4.4.1-00109-QCARMSWPZ-1 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-24ath10k: fix kernel panic by moving pci flush after napi_disableTamizh chelvam
When continuously running wifi up/down sequence, the napi poll can be scheduled after the CE buffers being freed by ath10k_pci_flush Steps: In a certain condition, during wifi down below scenario might occur. ath10k_stop->ath10k_hif_stop->napi_schedule->ath10k_pci_flush->napi_poll(napi_synchronize). In the above scenario, CE buffer entries will be freed up and become NULL in ath10k_pci_flush. And the napi_poll has been invoked after the flush process and it will try to get the skb from the CE buffer entry and perform some action on that. Since the CE buffer already cleaned by pci flush this action will create NULL pointer dereference and trigger below kernel panic. Unable to handle kernel NULL pointer dereference at virtual address 0000005c PC is at ath10k_pci_htt_rx_cb+0x64/0x3ec [ath10k_pci] ath10k_pci_htt_rx_cb [ath10k_pci] ath10k_ce_per_engine_service+0x74/0xc4 [ath10k_pci] ath10k_ce_per_engine_service [ath10k_pci] ath10k_ce_per_engine_service_any+0x74/0x80 [ath10k_pci] ath10k_ce_per_engine_service_any [ath10k_pci] ath10k_pci_napi_poll+0x48/0xec [ath10k_pci] ath10k_pci_napi_poll [ath10k_pci] net_rx_action+0xac/0x160 net_rx_action __do_softirq+0xdc/0x208 __do_softirq irq_exit+0x84/0xe0 irq_exit __handle_domain_irq+0x80/0xa0 __handle_domain_irq gic_handle_irq+0x38/0x5c gic_handle_irq __irq_usr+0x44/0x60 Tested on QCA4019 and firmware version 10.4.3.2.1.1-00010 Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19ath10k: modify hif tx paddr to dma_addr_t typeGovind Singh
Change type of hif sg tx paddr to dma_addr_t for supporting target having addressing mode greater than 32 bit. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: add memory dump support QCA9984Anilkumar Kolli
QCA9984/QCA99X0/QCA4019 chipsets have 8 memory regions, dump all of them to the firmware coredump file. Some of the regions need to be read using ioread() so add new region types for them. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> [kvalo: refactoring etc] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: refactor ath10k_pci_dump_memory() in preparation for QCA9984 supportKalle Valo
As QCA9984 needs two region types refactor the code to make it easier add the new types. No functional changes. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: add FW API 6 firmware image for QCA9377Ryan Hsu
Firmware WLAN.TF.2.1-00014-QCARMSWP-1 now supports reading the board ID information and also required 9 IRAM bank, which older ath10k version don't have the support will fail to be enabled, so in order to maintain the backward compatibility, we need to update the FW API to 6. Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 20:57:35 +0000