summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath10k/htt_rx.c
AgeCommit message (Collapse)Author
2019-04-23ath10k: htt: don't use txdone_fifo with SDIOAlagu Sankar
HTT High Latency (ATH10K_DEV_TYPE_HL) does not use txdone_fifo at all, we don't even initialise it by skipping ath10k_htt_tx_alloc_buf() in ath10k_htt_tx_start(). Because of this using QCA6174 SDIO ath10k_htt_rx_tx_compl_ind() will crash when it accesses unitialised txdone_fifo. So skip txdone_fifo when using High Latency mode. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1. Co-developed-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Alagu Sankar <alagusankar@silex-india.com> Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-08mac80211: make ieee80211_schedule_txq schedule empty TXQsFelix Fietkau
Currently there is no way for the driver to signal to mac80211 that it should schedule a TXQ even if there are no packets on the mac80211 part of that queue. This is problematic if the driver has an internal retry queue to deal with software A-MPDU retry. This patch changes the behavior of ieee80211_schedule_txq to always schedule the queue, as its only user (ath9k) seems to expect such behavior already: it calls this function on tx status and on powersave wakeup whenever its internal retry queue is not empty. Also add an extra argument to ieee80211_return_txq to get the same behavior. This fixes an issue on ath9k where tx queues with packets to retry (and no new packets in mac80211) would not get serviced. Fixes: 89cea7493a346 ("ath9k: Switch to mac80211 TXQ scheduling and airtime APIs") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-28ath10k: Fix the wrong calculation ht_idx and idx of rate table for tx_statsSurabhi Vishnoi
ht_idx (ht rate index) and idx (rate table index) are calculated based on mcs index. This mcs index used in the above calculation should be 0-9 for getting the correct ht_idx and idx. Currently the mcs index used for the above calculations is mcs index which can be 0-31 (in case of HT), leading to incorrect rate index and ht index values. Fix the issue by obtaining mcs value from the ratecode reported by firmware and use it for calculating ht_idx and idx (rate-table index). Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: e88975ca37d1 ("ath10k: dump tx stats in rate table format") Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28ath10k: Fix the wrong updation of SGI in tx_stats debugfsSurabhi Vishnoi
The SGI is updated wrongly in tx stats table in debugfs per sta entry. To know whether the packets/bytes are sent with SHORT GI, test whether the SGI bit(ATH10K_RATE_INFO_FLAGS_SGI_BIT) is set or not in the txrate flags. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: a904417fc876 ("ath10k: add extended per sta tx statistics support") Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28ath10k: Fix the incorrect updation of NSS data in tx statsSurabhi Vishnoi
The NSS data is updated incorrectly in the tx stats as the array indexing starts from zero. Fix the incorrect updation of NSS data in tx_stats by taking into consideration the array index starting from zero. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: a904417fc876 ("ath10k: add extended per sta tx statistics support") Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath10k: don't report unset rssi values to mac80211Alagu Sankar
The SDIO firmware does not provide RSSI value to the host, it's only set to zero. In that case don't report the value to mac80211. One risk here is that value zero might be a valid value with other firmware, currently there's no way to detect that. Without the fix, the rssi value indicated by iw changes between the actual value and -95. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00005-QCARMSWP-1. Co-developed-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Alagu Sankar <alagusankar@silex-india.com> Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath10k: add support for ack rssi value of data tx packetsAbhishek Ambure
In WCN3990, WMI_TLV_SERVICE_TX_DATA_MGMT_ACK_RSSI service Indicates that the firmware has the capability to send the RSSI value of the ACK for all data and management packets transmitted. If WMI_RSRC_CFG_FLAG_TX_ACK_RSSI is set in host capability then firmware sends RSSI value in "data" tx completion event. Host extracts ack rssi values of data packets from their tx completion event. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1 Signed-off-by: Abhishek Ambure <aambure@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-20ath10k: switch to use SPDX license identifiersKalle Valo
Use SPDX identifiers everywhere in ath10k. Makefile was incorrectly marked in commit b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license"), fix that as well. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-20ath10k: change 'unsigned long int' to 'unsigned long'Kalle Valo
Fixes checkpatch warnings: Prefer 'unsigned long' over 'unsigned long int' as the int is unnecessary Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-12ath10k: report tx airtime provided by fwManikanta Pubbisetty
If supported, update transmit airtime in mac80211 with the airtime values reported by the firmware. TX airtime of the PPDU is reported via HTT data TX completion indication message. A new service flag 'WMI_SERVICE_REPORT_AIRTIME' is added to advertise the firmware support. For firmwares which do not support this feature, TX airtime is calculated in the driver using TX bitrate. Hardwares tested : QCA9984 Firmwares tested : 10.4-3.6.1-00841 Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-12ath10k: report estimated frame transmit airtime to improve fairnessKan Yan
The airtime of a transmitted frame will be estimated from last used tx rate which the firmware reports with the peer stats feature (WMI_SERVICE_PEER_STATS). The airtime is computed on the tx path and it will be reported to mac80211 upon tx completion. This change is based on Kan's orginal commit in Chromium tree ("CHROMIUM: ath10k: Implementing airtime fairness based TX scheduler") ref: https://chromium-review.googlesource.com/588190 Tested on QCA4019 with firmware version 10.4-3.2.1.1-00015 Tested on QCA9984 with firmware version 10.4-3.9.0.1-00005 Signed-off-by: Kan Yan <kyan@google.com> [rmanohar@codeaurora.org: ported only the airtime computation] Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> [toke@redhat.com: Rebase to mac80211-next, add test note] Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-12ath10k: migrate to mac80211 txq schedulingToke Høiland-Jørgensen
ath10k maintains common txqs list for all stations. This txq management can be removed by migrating to mac80211 txq APIs and let mac80211 handle txqs reordering based on reported airtime. By doing this, txq fairness maintained in ath10k i.e processing N frames per txq is removed. By adapting to mac80211 APIs, ath10k will support mac80211 based airtime fairness algorithm. Tested on QCA4019 with firmware version 10.4-3.2.1.1-00015 Tested on QCA9984 with firmware version 10.4-3.9.0.1-00005 Tested-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-11ath10k: disable interface pause wow config for integrated chipsetGovind Singh
wow pause iface config controls the PCI D0/D3-WOW cases for pcie bus state. Firmware does not expects WOW_IFACE_PAUSE_ENABLED config for bus/link that cannot be suspended ex:snoc and does not trigger common subsystem shutdown. Disable interface pause wow config for integrated chipset(WCN3990) for correct WOW configuration in the firmware. Testing: Tested on WCN3990 HW. Tested FW: WLAN.HL.2.0-01192-QCAHLSWMTPLZ-1. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-07ath10k: fill tx_duration for each peer in Tx stats per STASurabhi Vishnoi
Firmware sends the tx_duration for each in HTT_T2H_MSG_TYPE_PEER_STATS msg. Fill the tx_duration sent by firmware in the tx stats information per STA. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1, WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1 Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20ath10k: fix peer stats null pointer dereferenceZhi Chen
There was a race condition in SMP that an ath10k_peer was created but its member sta was null. Following are procedures of ath10k_peer creation and member sta access in peer statistics path. 1. Peer creation: ath10k_peer_create() =>ath10k_wmi_peer_create() =>ath10k_wait_for_peer_created() ... # another kernel path, RX from firmware ath10k_htt_t2h_msg_handler() =>ath10k_peer_map_event() =>wake_up() # ar->peer_map[id] = peer //add peer to map #wake up original path from waiting ... # peer->sta = sta //sta assignment 2. RX path of statistics ath10k_htt_t2h_msg_handler() =>ath10k_update_per_peer_tx_stats() =>ath10k_htt_fetch_peer_stats() # peer->sta //sta accessing Any access of peer->sta after peer was added to peer_map but before sta was assigned could cause a null pointer issue. And because these two steps are asynchronous, no proper lock can protect them. So both peer and sta need to be checked before access. Tested: QCA9984 with firmware ver 10.4-3.9.0.1-00005 Signed-off-by: Zhi Chen <zhichen@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20ath10k: fix warning due to msdu limit errorBhagavathi Perumal S
Some hardwares variants (QCA99x0) are limiting msdu deaggregation with some threshold value(default limit in QCA99x0 is 64 msdus), it was introduced to avoid excessive MSDU-deaggregation in error cases. When number of sub frames exceeds the limit, target hardware will send all msdus starting from present msdu in RAW format as a single msdu packet and it will be indicated with error status bit "RX_MSDU_END_INFO0_MSDU_LIMIT_ERR" set in rx descriptor. This msdu frame is a partial raw MSDU and does't have first msdu and ieee80211 header. It caused below warning message. [ 320.151332] ------------[ cut here ]------------ [ 320.155006] WARNING: CPU: 0 PID: 3 at drivers/net/wireless/ath/ath10k/htt_rx.c:1188 In our issue case, MSDU limit error happened due to FCS error and generated this warning message. This fixes the warning by handling the MSDU limit error. If msdu limit error happens, driver adds first MSDU's ieee80211 header and sets A-MSDU present bit in QOS header so that upper layer processes this frame if it is valid or drop it if FCS error set. And removed the warning message, hence partial msdus without first msdu is expected in msdu limit error cases. Tested on QCA9984, Firmware 10.4-3.6-00104 Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20ath10k: report tx rate using ieee80211_tx_rate_update()Anilkumar Kolli
Mesh path metric needs tx rate information from ieee80211_tx_status() call but in ath10k there is no mechanism to report tx rate information via ieee80211_tx_status(), the tx rate is only accessible via sta_statiscs() op. Per peer tx stats has tx rate info available, Tx rate is available to ath10k driver after every 4 PPDU sent in the air. For each PPDU, ath10k driver updates rate informattion to mac80211 using ieee80211_tx_rate_update(). Per peer txrate information is updated through per peer statistics and is available for QCA9888/QCA9984/QCA4019/QCA998X only Tested on QCA9984 with firmware-5.bin_10.4-3.5.3-00053 Tested on QCA998X with firmware-5.bin_10.2.4-1.0-00036 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20ath10k: add amsdu support for monitor modeYu Wang
When processing HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND, if the length of a msdu is larger than the tailroom of the rx skb, skb_over_panic issue will happen when calling skb_put. In monitor mode, amsdu will be handled in this path, and msdu_len of the first msdu_desc is the length of the entire amsdu, which might be larger than the maximum length of a skb, in such case, it will hit the issue upon. To fix this issue, process msdu list separately for monitor mode. Successfully tested with: QCA6174 (FW version: RM.4.4.1.c2-00057-QCARMSWP-1). Signed-off-by: Yu Wang <yyuwang@codeaurora.org> [kvalo@codeaurora.org: cosmetic cleanup] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-05ath10k: dump tx stats in rate table formatAnilkumar Kolli
This patch adds the tx statistics pkts/bytes dump in rate table format. Dump format table is similar to http://mcsindex.com/ Tested on QCA9984/QCA4019/QCA988x Firmware: 10.4-3.5.3-00057 10.2.4-1.0-00037 command: cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan0/ stations/<MACADDR>/tx_stats Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13ath10k: htt: remove some dead codeDan Carpenter
We added an unnecessary condition here in commit a904417fc876 ("ath10k: add extended per sta tx statistics support"). "legacy_rate_idx" is a u8 so it can't be negative. The caller doesn't pass negatives either. I have deleted this code. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13ath10k: htt_rx: fix signedness bug in ath10k_update_per_peer_tx_statsGustavo A. R. Silva
Currently, the error handling for the call to function ath10k_get_legacy_rate_idx() doesn't work because *rate_idx* is of type u8 (8 bits, unsigned), which makes it impossible for it to hold a value less than 0. Fix this by changing the type of variable *rate_idx* to s8 (8 bits, signed). Addresses-Coverity-ID: 1473914 ("Unsigned compared against 0") Fixes: 0189dbd71cbd ("ath10k: get the legacy rate index to update the txrate table") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-04Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.20. Major changes: ath10k * retrieve MAC address from system firmware if provided * support extended board data download for dual-band QCA9984 * extended per sta tx statistics support via debugfs * average ack rssi support for data frames * speed up QCA6174 and QCA9377 firmware download using diag Copy Engine * HTT High Latency mode support needed by SDIO and USB support * get STA power save state via debugfs ath9k * add reset functionality for airtime station debugfs file
2018-09-06ath10k: htt: High latency RX supportErik Stromdahl
Special HTT RX handling for high latency interfaces. Since no DMA physical addresses are used in the RX ring config message (this is not supported by the high latency devices), no RX ring is allocated. All RX skb's are allocated by the driver and passed directly to mac80211 in the HTT RX indication handler. A nice side effect of this is that no huge buffer will be allocated with dma_alloc_coherent. On embedded systems with limited memory resources, the allocation of the RX ring is prone to fail. Some tweaks made to "make it work": Removal of protected bit in 802.11 header frame control field. The chipset seems to do hw decryption but the frame_control protected bit is still set. This is necessary for mac80211 not to drop the frame. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-06ath10k: add HTT RX HL opsErik Stromdahl
Initial (empty) HTT RX ops for high latency devices. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-06ath10k: average ack rssi support for data framesBalaji Pothunoori
Average ack rssi value is weighted average of ack rssi for no of msdu's has been sent. This feature is enabled by the host driver if firmware is capable. After receiving event from host, firmware allocates the necessary memory to store the ack_rssi for data packets during the init time. After each successful transmission, If tx completion status is OK and 24th bit is set in HTT message header then host will fetch the ack_rssi else host can ignore the ack_rssi field. Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-06ath10k: add extended per sta tx statistics supportAnilkumar Kolli
This patch adds per station tx statistics support. Per station tx stats include - pkts/bytes transmitted at all possible rates(mcs/nss/bw/gi). - ACK fails count - ampdu bytes/pkts transmitted at all possible rates(mcs/nss/bw/gi). - BA fails count Tested on QCA9984/QCA4019/QCA988x Firmware: 10.4-3.5.3-00057 10.2.4-1.0-00037 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-06ath10k: get the legacy rate index to update the txrate tableAnilkumar Kolli
Get the legacy rate index to update the pkts/bytes counter against each possible tx rate. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04wireless: remove unnecessary unlikely()Igor Stoppa
Both WARN_ON() and WARN_ON_ONCE() already contain unlikely(). Signed-off-by: Igor Stoppa <igor.stoppa@huawei.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Michal Kazior <michal.kazior@tieto.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: Linux Wireless Mailing List <linux-wireless@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-29ath10k: use locked skb_dequeue for rx completionsBob Copeland
In our environment we are occasionally seeing the following stack trace in ath10k: Unable to handle kernel paging request at virtual address 0000a800 pgd = c0204000 [0000a800] *pgd=00000000 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: dwc3 dwc3_of_simple phy_qcom_dwc3 nf_nat xt_connmark CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.31 #2 Hardware name: Generic DT based system task: c09f4f40 task.stack: c09ee000 PC is at kfree_skb_list+0x1c/0x2c LR is at skb_release_data+0x6c/0x108 pc : [<c065dcc4>] lr : [<c065da5c>] psr: 200f0113 sp : c09efb68 ip : c09efb80 fp : c09efb7c r10: 00000000 r9 : 00000000 r8 : 043fddd1 r7 : bf15d160 r6 : 00000000 r5 : d4ca2f00 r4 : ca7c6480 r3 : 000000a0 r2 : 01000000 r1 : c0a57470 r0 : 0000a800 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5787d Table: 56e6006a DAC: 00000051 Process swapper/0 (pid: 0, stack limit = 0xc09ee210) Stack: (0xc09efb68 to 0xc09f0000) fb60: ca7c6480 d4ca2f00 c09efb9c c09efb80 c065da5c c065dcb4 fb80: d4ca2f00 00000000 dcbf8400 bf15d160 c09efbb4 c09efba0 c065db28 c065d9fc fba0: d4ca2f00 00000000 c09efbcc c09efbb8 c065db48 c065db04 d4ca2f00 00000000 fbc0: c09efbe4 c09efbd0 c065ddd0 c065db38 d4ca2f00 00000000 c09efc64 c09efbe8 fbe0: bf09bd00 c065dd10 00000003 7fffffff c09efc24 dcbfc9c0 01200000 00000000 fc00: 00000000 00000000 ddb7e440 c09e9440 c09efc48 1d195000 c09efc7c c09efc28 fc20: c027bb68 c028aa00 ddb7e4f8 bf13231c ddb7e454 0004091f bf154571 d4ca2f00 fc40: dcbf8d00 ca7c5df6 bf154538 01200000 00000000 bf154538 c09efd1c c09efc68 fc60: bf132458 bf09bbbc ca7c5dec 00000041 bf154538 bf154539 000007bf bf154545 fc80: bf154538 bf154538 bf154538 bf154538 bf154538 00000000 00000000 000016c1 fca0: 00000001 c09efcb0 01200000 00000000 00000000 00000000 00000000 00000001 fcc0: bf154539 00000041 00000000 00000007 00000000 000000d0 ffffffff 3160ffff fce0: 9ad93e97 3e973160 7bf09ad9 0004091f d4ca2f00 c09efdb0 dcbf94e8 00000000 fd00: dcbf8d00 01200000 00000000 dcbf8d00 c09efd44 c09efd20 bf132544 bf132130 fd20: dcbf8d00 00000000 d4ca2f00 c09efdb0 00000001 d4ca2f00 c09efdec c09efd48 fd40: bf133630 bf1324d0 ca7c5cc0 000007c0 c09efd88 c09efd70 c0764230 c02277d8 fd60: 200f0113 ffffffff dcbf94c8 bf000000 dcbf93b0 dcbf8d00 00000040 dcbf945c fd80: dcbf94e8 00000000 c09efdcc 00000000 c09efd90 c09efd90 00000000 00000024 fda0: dcbf8d00 00000000 00000005 dcbf8d00 c09efdb0 c09efdb0 00000000 00000040 fdc0: c09efdec dcbf8d00 dcbfc9c0 c09ed140 00000040 00000000 00000100 00000040 fde0: c09efe14 c09efdf0 bf1739b4 bf132840 dcbfc9c0 ddb82140 c09ed140 1d195000 fe00: 00000001 00000100 c09efe64 c09efe18 c067136c bf173958 ddb7fac8 c09f0d00 fe20: 001df678 0000012c c09efe28 c09efe28 c09efe30 c09efe30 c0a7fb28 ffffe000 fe40: c09f008c 00000003 00000008 c0a598c0 00000100 c09f0080 c09efeb4 c09efe68 fe60: c02096e0 c0671278 c0494584 00000080 dd5c3300 c09f0d00 00000004 001df677 fe80: 0000000a 00200100 dd5c3300 00000000 00000000 c09eaa70 00000060 dd410800 fea0: c09ee000 00000000 c09efecc c09efeb8 c0227944 c02094c4 00000000 00000000 fec0: c09efef4 c09efed0 c0268b64 c02278ac de802000 c09f1b1c c09eff20 c0a16cc0 fee0: de803000 c09ee000 c09eff1c c09efef8 c020947c c0268ae0 c02103dc 600f0013 ff00: ffffffff c09eff54 ffffe000 c09ee000 c09eff7c c09eff20 c021448c c0209424 ff20: 00000001 00000000 00000000 c021ddc0 00000000 00000000 c09f1024 00000001 ff40: ffffe000 c09f1078 00000000 c09eff7c c09eff80 c09eff70 c02103ec c02103dc ff60: 600f0013 ffffffff 00000051 00000000 c09eff8c c09eff80 c0763cc4 c02103bc ff80: c09effa4 c09eff90 c025f0e4 c0763c98 c0a59040 c09f1000 c09effb4 c09effa8 ffa0: c075efe0 c025efd4 c09efff4 c09effb8 c097dcac c075ef7c ffffffff ffffffff ffc0: 00000000 c097d6c4 00000000 c09c1a28 c0a59294 c09f101c c09c1a24 c09f61c0 ffe0: 4220406a 512f04d0 00000000 c09efff8 4220807c c097d95c 00000000 00000000 [<c065dcc4>] (kfree_skb_list) from [<c065da5c>] (skb_release_data+0x6c/0x108) [<c065da5c>] (skb_release_data) from [<c065db28>] (skb_release_all+0x30/0x34) [<c065db28>] (skb_release_all) from [<c065db48>] (__kfree_skb+0x1c/0x9c) [<c065db48>] (__kfree_skb) from [<c065ddd0>] (consume_skb+0xcc/0xd8) [<c065ddd0>] (consume_skb) from [<bf09bd00>] (ieee80211_rx_napi+0x150/0x82c [mac80211]) [<bf09bd00>] (ieee80211_rx_napi [mac80211]) from [<bf132458>] (ath10k_htt_t2h_msg_handler+0x15e8/0x19c4 [ath10k_core]) [<bf132458>] (ath10k_htt_t2h_msg_handler [ath10k_core]) from [<bf132544>] (ath10k_htt_t2h_msg_handler+0x16d4/0x19c4 [ath10k_core]) [<bf132544>] (ath10k_htt_t2h_msg_handler [ath10k_core]) from [<bf133630>] (ath10k_htt_txrx_compl_task+0xdfc/0x12cc [ath10k_core]) [<bf133630>] (ath10k_htt_txrx_compl_task [ath10k_core]) from [<bf1739b4>] (ath10k_pci_napi_poll+0x68/0xf4 [ath10k_pci]) [<bf1739b4>] (ath10k_pci_napi_poll [ath10k_pci]) from [<c067136c>] (net_rx_action+0x100/0x33c) [<c067136c>] (net_rx_action) from [<c02096e0>] (__do_softirq+0x228/0x31c) [<c02096e0>] (__do_softirq) from [<c0227944>] (irq_exit+0xa4/0x114) The trace points to a corrupt skb inside kfree_skb(), seemingly because one of the shared skb queues is getting corrupted. Most of the skb queues ath10k uses are local to a single call stack, but three are shared among multiple codepaths: - rx_msdus_q, - rx_in_ord_compl_q, and - tx_fetch_ind_q Of the three, the first two are manipulated using the unlocked skb_queue functions without any additional lock protecting them. Use the locked variants of skb_queue_* functions to protect these manipulations. Signed-off-by: Bob Copeland <bobcopeland@fb.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-28ath10k: protect ath10k_htt_rx_ring_free with rx_ring.lockBen Greear
While debugging driver crashes related to a buggy firmware crashing under load, I noticed that ath10k_htt_rx_ring_free could be called without being under lock. I'm not sure if this is the root cause of the crash or not, but it seems prudent to protect it. Originally tested on 4.16+ kernel with ath10k-ct 10.4 firmware running on 9984 NIC. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-19ath10k: add inlined wrappers for htt rx opsErik Stromdahl
Added for the same reason as the TX wrappers. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-19ath10k: Add tx ack signal support for management framesVenkateswara Naralasetty
This patch add support to get RSSI from acknowledgment frames for transmitted management frames. hardware_used: QCA4019, QCA9984. firmware version: 10.4-3.5.3-00052. Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: fix recent bandwidth conversion bugChristian Lamparter
The commit "cfg80211: make RATE_INFO_BW_20 the default" changed the index of RATE_INFO_BW_20, but the updates to ath10k missed the special bandwidth calculation case in ath10k_update_per_peer_tx_stats(). This will fix below warning, WARNING: CPU: 0 PID: 609 at net/wireless/util.c:1254 cfg80211_calculate_bitrate+0x174/0x220 invalid rate bw=1, mcs=9, nss=2 (unwind_backtrace) from (cfg80211_calculate_bitrate+0x174/0x220) (cfg80211_calculate_bitrate) from (nl80211_put_sta_rate+0x44/0x1dc)from (nl80211_put_sta_rate) from (nl80211_send_station+0x388/0xaf0) (nl80211_get_station+0xa8/0xec) [ end trace da8257d6a850e91a ] Fixes: 842be75c77cb ("cfg80211: make RATE_INFO_BW_20 the default") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-26ath10k: add sta rx packet stats per tidVasanthakumar Thiagarajan
Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-27ath10k: update copyright yearKalle Valo
Update year for Qualcomm Atheros, Inc. copyrights. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add paddrs_ring_64 support for 64bit targetGovind Singh
paddrs_ring_64 holds the physical device address of the rx buffers that host SW provides for the MAC HW to fill. Since this field is used in rx ring setup and rx ring replenish in rx data path. Define separate methods for handling 64 bit ring paddr and attach them dynamically based on target_64bit hw param flag. Use u64 type while popping paddr from the rx hash table for 64bit target. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add hw param for rx ring size supportGovind Singh
WCN3990 uses larger ring size in comparison to existing ring size value. Add rx ring size hw param for supporting different rx ring size across multiple target. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add support for 64 bit HTT in-order indication msgGovind Singh
WCN3990 target use 64bit msdu address in htt in-order indication message. Add support for 64 bit msdu address in HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND message. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-14ath10k: add per peer tx stats support for 10.2.4Anilkumar Kolli
10.2.4 firmware branch (used in QCA988X) does not support HTT_10_4_T2H_MSG_TYPE_PEER_STATS and that's why ath10k does not provide tranmission rate statistics to user space, instead it just shows hardcoded 6 Mbit/s. But pktlog firmware facility provides per peer tx statistics. The firmware sends one pktlog event for every four PPDUs per peer, which include: * successful number of packets and bytes transmitted * number of packets and bytes dropped * retried number of packets and bytes * rate info per ppdu Firmware supports WMI_SERVICE_PEER_STATS, pktlog is enabled through ATH10K_FLAG_PEER_STATS, which is nowadays enabled by default in ath10k. This patch does not impact throughput. Tested on QCA9880 with firmware version 10.2.4.70.48. This should also work with firmware branch 10.2.4-1.0-00029 Parse peer stats from pktlog packets and update the tx rate information per STA. This way user space can query about transmit rate with iw: $iw wlan0 station dump Station 3c:a9:f4:72:bb:a4 (on wlan1) inactive time: 8210 ms rx bytes: 9166 rx packets: 44 tx bytes: 1105 tx packets: 9 tx retries: 0 tx failed: 1 rx drop misc: 3 signal: -75 [-75, -87, -88] dBm signal avg: -75 [-75, -85, -88] dBm tx bitrate: 39.0 MBit/s MCS 10 rx bitrate: 26.0 MBit/s MCS 3 rx duration: 23250 us authorized: yes authenticated: yes associated: yes preamble: short WMM/WME: yes MFP: no TDLS peer: no DTIM period: 2 beacon interval:100 short preamble: yes short slot time:yes connected time: 22 seconds Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-14ath10k: unify rx processing in napi_pollRajkumar Manoharan
With current NAPI implementation, NAPI poll can deliver more frames to net core than allotted budget. This may cause warning in napi_poll. Remaining quota is not accounted, while processing amsdus in rx_in_ord_ind and rx_ind queue. Adding num_msdus at last can not prevent delivering more frames to net core. With this change, all amdus from both in_ord_ind and rx_ind queues are processed and enqueued into common skb list instead of delivering into mac80211. Later msdus from common queue are dequeued and delivered depends on quota availability. This change also simplifies the rx processing in napi poll routine. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-11-20ath10k: fix data rx for CCMP-256, GCMP and GCMP-256 in raw modeVasanthakumar Thiagarajan
Make sure 16-byte mic is removed from the rx data packet tail when CCMP-256, GCMP and GCMP-256 ciphers are used in raw decap mode. This fixed rx traffic failures in those ciphers in raw mode. Split the helper returning crypto tail length into two, one to get the ICV length and other to get the mic lengh for the cipher to make it clean. Fixes: 2ea9f12cefe4 ("ath10k: add new cipher suite support") Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-11-04Merge tag 'wireless-drivers-next-for-davem-2017-11-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.15 Mostly fixes this time, but also few new features. Major changes: wil6210 * remove ssid debugfs file rsi * add WOWLAN support for suspend, hibernate and shutdown states ath10k * add support for CCMP-256, GCMP and GCMP-256 ciphers on hardware where it's supported (QCA99x0 and QCA4019) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-30Revert "ath10k: fix napi_poll budget overflow"Kalle Valo
Thorsten reported on <fa6e3ee2-91b5-a54b-afe3-87f30aac7a48@leemhuis.info> that commit c9353bf483d3 made ath10k unstable with QCA6174 on his Dell XPS13 (9360) with an error message: ath10k_pci 0000:3a:00.0: failed to extract amsdu: -11 It only seemed to happen with certain APs, not all, but when it happened the only way to get ath10k working was to switch the wifi off and on with a hotkey. As this commit made things even worse (a warning vs breaking the whole connection) let's revert the commit for now and while the issue is being fixed. Link: http://lists.infradead.org/pipermail/ath10k/2017-October/010227.html Reported-by: Thorsten Leemhuis <linux@leemhuis.info> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-10-30ath10k: rebuild crypto header in rx data framesVasanthakumar Thiagarajan
Rx data frames notified through HTT_T2H_MSG_TYPE_RX_IND and HTT_T2H_MSG_TYPE_RX_FRAG_IND expect PN/TSC check to be done on host (mac80211) rather than firmware. Rebuild cipher header in every received data frames (that are notified through those HTT interfaces) from the rx_hdr_status tlv available in the rx descriptor of the first msdu. Skip setting RX_FLAG_IV_STRIPPED flag for the packets which requires mac80211 PN/TSC check support and set appropriate RX_FLAG for stripped crypto tail. Hw QCA988X, QCA9887, QCA99X0, QCA9984, QCA9888 and QCA4019 currently need the rebuilding of cipher header to perform PN/TSC check for replay attack. Please note that removing crypto tail for CCMP-256, GCMP and GCMP-256 ciphers in raw mode needs to be fixed. Since Rx with these ciphers in raw mode does not work in the current form even without this patch and removing crypto tail for these chipers needs clean up, raw mode related issues in CCMP-256, GCMP and GCMP-256 can be addressed in follow up patches. Tested-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-10-27ath: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-31ath10k: fix napi_poll budget overflowRyan Hsu
In napi_poll, the budget number is used to control the amount of packets we should handle per poll to balance the resource in the system. In the list of the amsdu packets reception, we check if there is budget count left and handle the complete list of the packets, that it will have chances the very last list will over the budget leftover. So adding one more parameter - budget_left, this would help while traversing the list to avoid handling more than the budget given. Reported-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Fix-suggested-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Link: https://lkml.kernel.org/r/26670dce-4dd2-f8e4-0e14-90d74257e739@virtuozzo.com Signed-off-by: Ryan Hsu <ryanhsu@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08ath10k: ath10k_htt_rx_amsdu_allowed() use ath10k_dbg()Gabriel Craciunescu
Each time we get disconnected from AP we get flooded with messages like: ... ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)! <until ratelimit kicks in> ath10k_warn: 155 callbacks suppressed ... Use ath10k_dbg() here too. Signed-off-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-03ath10k: set a-mpdu receiver reference numberMatthias Frei
Set the a-mpdu reference number in ath10k to make it accessible in the receivers radiotap header. Implemented as in ath9k. The reference number is needed for troubleshooting and research at the receivers site (e.g. to identify mpdu's that were aggregated in an a-mpdu) Signed-off-by: Matthias Frei <mf@frei.media> [kvalo@qca.qualcomm.com: fix checkpatch warning, commit log cleanup] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-16ath10k: add per chain RSSI reportingNorik Dzhandzhapanyan
Report per chain RSSI to mac80211. Signed-off-by: Norik Dzhandzhapanyan <norikd@gmail.com> [kvalo@qca.qualcomm.com: fix conflicts and style] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 15:07:35 +0000