summaryrefslogtreecommitdiff
path: root/drivers/net/usb
AgeCommit message (Collapse)Author
2017-12-25r8152: fix the list rx_done may be used without initializationhayeswang
[ Upstream commit 98d068ab52b4b11d403995ed14154660797e7136 ] The list rx_done would be initialized when the linking on occurs. Therefore, if a napi is scheduled without any linking on before, the following kernel panic would happen. BUG: unable to handle kernel NULL pointer dereference at 000000000000008 IP: [<ffffffffc085efde>] r8152_poll+0xe1e/0x1210 [r8152] PGD 0 Oops: 0002 [#1] SMP Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16usbnet: fix alignment for frames with no ethernet headerBjørn Mork
[ Upstream commit a4abd7a80addb4a9547f7dfc7812566b60ec505c ] The qmi_wwan minidriver support a 'raw-ip' mode where frames are received without any ethernet header. This causes alignment issues because the skbs allocated by usbnet are "IP aligned". Fix by allowing minidrivers to disable the additional alignment offset. This is implemented using a per-device flag, since the same minidriver also supports 'ethernet' mode. Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode") Reported-and-tested-by: Jay Foster <jay@systech.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16net: qmi_wwan: add Quectel BG96 2c7c:0296Sebastian Sjoholm
[ Upstream commit f9409e7f086fa6c4623769b4b2f4f17a024d8143 ] Quectel BG96 is an Qualcomm MDM9206 based IoT modem, supporting both CAT-M and NB-IoT. Tested hardware is BG96 mounted on Quectel development board (EVB). The USB id is added to qmi_wwan.c to allow QMI communication with the BG96. Signed-off-by: Sebastian Sjoholm <ssjoholm@mac.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24net: usb: asix: fill null-ptr-deref in asix_suspendAndrey Konovalov
[ Upstream commit 8f5624629105589bcc23d0e51cc01bd8103d09a5 ] When asix_suspend() is called dev->driver_priv might not have been assigned a value, so we need to check that it's not NULL. Similar issue is present in asix_resume(), this patch fixes it as well. Found by syzkaller. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc4-43422-geccacdd69a8c #400 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006bb36300 task.stack: ffff88006bba8000 RIP: 0010:asix_suspend+0x76/0xc0 drivers/net/usb/asix_devices.c:629 RSP: 0018:ffff88006bbae718 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff880061ba3b80 RCX: 1ffff1000c34d644 RDX: 0000000000000001 RSI: 0000000000000402 RDI: 0000000000000008 RBP: ffff88006bbae738 R08: 1ffff1000d775cad R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800630a8b40 R13: 0000000000000000 R14: 0000000000000402 R15: ffff880061ba3b80 FS: 0000000000000000(0000) GS:ffff88006c600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff33cf89000 CR3: 0000000061c0a000 CR4: 00000000000006f0 Call Trace: usb_suspend_interface drivers/usb/core/driver.c:1209 usb_suspend_both+0x27f/0x7e0 drivers/usb/core/driver.c:1314 usb_runtime_suspend+0x41/0x120 drivers/usb/core/driver.c:1852 __rpm_callback+0x339/0xb60 drivers/base/power/runtime.c:334 rpm_callback+0x106/0x220 drivers/base/power/runtime.c:461 rpm_suspend+0x465/0x1980 drivers/base/power/runtime.c:596 __pm_runtime_suspend+0x11e/0x230 drivers/base/power/runtime.c:1009 pm_runtime_put_sync_autosuspend ./include/linux/pm_runtime.h:251 usb_new_device+0xa37/0x1020 drivers/usb/core/hub.c:2487 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Code: 8d 7c 24 20 48 89 fa 48 c1 ea 03 80 3c 02 00 75 5b 48 b8 00 00 00 00 00 fc ff df 4d 8b 6c 24 20 49 8d 7d 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 34 4d 8b 6d 08 4d 85 ed 74 0b e8 26 2b 51 fd 4c RIP: asix_suspend+0x76/0xc0 RSP: ffff88006bbae718 ---[ end trace dfc4f5649284342c ]--- Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24qmi_wwan: Add missing skb_reset_mac_header-callKristian Evensen
[ Upstream commit 0de0add10e587effa880c741c9413c874f16be91 ] When we receive a packet on a QMI device in raw IP mode, we should call skb_reset_mac_header() to ensure that skb->mac_header contains a valid offset in the packet. While it shouldn't really matter, the packets have no MAC header and the interface is configured as-such, it seems certain parts of the network stack expects a "good" value in skb->mac_header. Without the skb_reset_mac_header() call added in this patch, for example shaping traffic (using tc) triggers the following oops on the first received packet: [ 303.642957] skbuff: skb_under_panic: text:8f137918 len:177 put:67 head:8e4b0f00 data:8e4b0eff tail:0x8e4b0fb0 end:0x8e4b1520 dev:wwan0 [ 303.655045] Kernel bug detected[#1]: [ 303.658622] CPU: 1 PID: 1002 Comm: logd Not tainted 4.9.58 #0 [ 303.664339] task: 8fdf05e0 task.stack: 8f15c000 [ 303.668844] $ 0 : 00000000 00000001 0000007a 00000000 [ 303.674062] $ 4 : 8149a2fc 8149a2fc 8149ce20 00000000 [ 303.679284] $ 8 : 00000030 3878303a 31623465 20303235 [ 303.684510] $12 : ded731e3 2626a277 00000000 03bd0000 [ 303.689747] $16 : 8ef62b40 00000043 8f137918 804db5fc [ 303.694978] $20 : 00000001 00000004 8fc13800 00000003 [ 303.700215] $24 : 00000001 8024ab10 [ 303.705442] $28 : 8f15c000 8fc19cf0 00000043 802cc920 [ 303.710664] Hi : 00000000 [ 303.713533] Lo : 74e58000 [ 303.716436] epc : 802cc920 skb_panic+0x58/0x5c [ 303.721046] ra : 802cc920 skb_panic+0x58/0x5c [ 303.725639] Status: 11007c03 KERNEL EXL IE [ 303.729823] Cause : 50800024 (ExcCode 09) [ 303.733817] PrId : 0001992f (MIPS 1004Kc) [ 303.737892] Modules linked in: rt2800pci rt2800mmio rt2800lib qcserial ppp_async option usb_wwan rt2x00pci rt2x00mmio rt2x00lib rndis_host qmi_wwan ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 mt76x2i Process logd (pid: 1002, threadinfo=8f15c000, task=8fdf05e0, tls=77b3eee4) [ 303.962509] Stack : 00000000 80408990 8f137918 000000b1 00000043 8e4b0f00 8e4b0eff 8e4b0fb0 [ 303.970871] 8e4b1520 8fec1800 00000043 802cd2a4 6e000045 00000043 00000000 8ef62000 [ 303.979219] 8eef5d00 8ef62b40 8fea7300 8f137918 00000000 00000000 0002bb01 793e5664 [ 303.987568] 8ef08884 00000001 8fea7300 00000002 8fc19e80 8eef5d00 00000006 00000003 [ 303.995934] 00000000 8030ba90 00000003 77ab3fd0 8149dc80 8004d1bc 8f15c000 8f383700 [ 304.004324] ... [ 304.006767] Call Trace: [ 304.009241] [<802cc920>] skb_panic+0x58/0x5c [ 304.013504] [<802cd2a4>] skb_push+0x78/0x90 [ 304.017783] [<8f137918>] 0x8f137918 [ 304.021269] Code: 00602825 0c02a3b4 24842888 <000c000d> 8c870060 8c8200a0 0007382b 00070336 8c88005c [ 304.031034] [ 304.032805] ---[ end trace b778c482b3f0bda9 ]--- [ 304.041384] Kernel panic - not syncing: Fatal exception in interrupt [ 304.051975] Rebooting in 3 seconds.. While the oops is for a 4.9-kernel, I was able to trigger the same oops with net-next as of yesterday. Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode") Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24net: qmi_wwan: fix divide by 0 on bad descriptorsBjørn Mork
[ Upstream commit 7fd078337201cf7468f53c3d9ef81ff78cb6df3b ] A CDC Ethernet functional descriptor with wMaxSegmentSize = 0 will cause a divide error in usbnet_probe: divide error: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc8-44453-g1fdc1a82c34f #56 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006bef5c00 task.stack: ffff88006bf60000 RIP: 0010:usbnet_update_max_qlen+0x24d/0x390 drivers/net/usb/usbnet.c:355 RSP: 0018:ffff88006bf67508 EFLAGS: 00010246 RAX: 00000000000163c8 RBX: ffff8800621fce40 RCX: ffff8800621fcf34 RDX: 0000000000000000 RSI: ffffffff837ecb7a RDI: ffff8800621fcf34 RBP: ffff88006bf67520 R08: ffff88006bef5c00 R09: ffffed000c43f881 R10: ffffed000c43f880 R11: ffff8800621fc406 R12: 0000000000000003 R13: ffffffff85c71de0 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88006ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe9c0d6dac CR3: 00000000614f4000 CR4: 00000000000006f0 Call Trace: usbnet_probe+0x18b5/0x2790 drivers/net/usb/usbnet.c:1783 qmi_wwan_probe+0x133/0x220 drivers/net/usb/qmi_wwan.c:1338 usb_probe_interface+0x324/0x940 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x522/0x740 drivers/base/dd.c:557 Fix by simply ignoring the bogus descriptor, as it is optional for QMI devices anyway. Fixes: 423ce8caab7e ("net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24net: cdc_ether: fix divide by 0 on bad descriptorsBjørn Mork
[ Upstream commit 2cb80187ba065d7decad7c6614e35e07aec8a974 ] Setting dev->hard_mtu to 0 will cause a divide error in usbnet_probe. Protect against devices with bogus CDC Ethernet functional descriptors by ignoring a zero wMaxSegmentSize. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15cdc_ncm: Set NTB format again after altsetting switch for Huawei devicesEnrico Mioso
commit 2b02c20ce0c28974b44e69a2e2f5ddc6a470ad6f upstream. Some firmwares in Huawei E3372H devices have been observed to switch back to NTB 32-bit format after altsetting switch. This patch implements a driver flag to check for the device settings and set NTB format to 16-bit again if needed. The flag has been activated for devices controlled by the huawei_cdc_ncm.c driver. V1->V2: - fixed broken error checks - some corrections to the commit message V2->V3: - variable name changes, to clarify what's happening - check (and possibly set) the NTB format later in the common bind code path Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Reported-and-tested-by: Christian Panton <christian@panton.org> Reviewed-by: Bjørn Mork <bjorn@mork.no> CC: Bjørn Mork <bjorn@mork.no> CC: Christian Panton <christian@panton.org> CC: linux-usb@vger.kernel.org CC: netdev@vger.kernel.org CC: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Porto Rio <porto.rio@gmx.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08usb: plusb: Add support for PL-27A1Roman Spychała
[ Upstream commit 6f2aee0c0de65013333bbc26fe50c9c7b09a37f7 ] This patch adds support for the PL-27A1 by adding the appropriate USB ID's. This chip is used in the goobay Active USB 3.0 Data Link and Unitek Y-3501 cables. Signed-off-by: Roman Spychała <roed@onet.eu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-24usb: qmi_wwan: add D-Link DWM-222 device IDHector Martin
commit bed9ff165960921303a100228585f2d1691b42eb upstream. Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06net: usb: asix_devices: add .reset_resume for USB PMPeter Chen
[ Upstream commit 63dfb0dac9055145db85ce764355aef2f563739a ] The USB core may call reset_resume when it fails to resume asix device. And USB core can recovery this abnormal resume at low level driver, the same .resume at asix driver can work too. Add .reset_resume can avoid disconnecting after backing from system resume, and NFS can still be mounted after this commit. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17r8152: avoid start_xmit to schedule napi when napi is disabledhayeswang
[ Upstream commit de9bf29dd6e4a8a874cb92f8901aed50a9d0b1d3 ] Stop the tx when the napi is disabled to prevent napi_schedule() is called. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17r8152: fix rtl8152_post_reset functionhayeswang
[ Upstream commit 2c561b2b728ca4013e76d6439bde2c137503745e ] The rtl8152_post_reset() should sumbit rx urb and interrupt transfer, otherwise the rx wouldn't work and the linking change couldn't be detected. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17r8152: re-schedule napi for txhayeswang
[ Upstream commit 248b213ad908b88db15941202ef7cb7eb137c1a0 ] Re-schedule napi after napi_complete() for tx, if it is necessay. In r8152_poll(), if the tx is completed after tx_bottom() and before napi_complete(), the scheduling of napi would be lost. Then, no one handles the next tx until the next napi_schedule() is called. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17r8152: check rx after napi is enabledhayeswang
[ Upstream commit 7489bdadb7d17d3c81e39b85688500f700beb790 ] Schedule the napi after napi_enable() for rx, if it is necessary. If the rx is completed when napi is disabled, the sheduling of napi would be lost. Then, no one handles the rx packet until next napi is scheduled. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17r8152: avoid start_xmit to call napi_schedule during autosuspendhayeswang
[ Upstream commit 26afec39306926654e9cd320f19bbf3685bb0997 ] Adjust the setting of the flag of SELECTIVE_SUSPEND to prevent start_xmit() from calling napi_schedule() directly during runtime suspend. After calling napi_disable() or clearing the flag of WORK_ENABLE, scheduling the napi is useless. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17sierra_net: Add support for IPv6 and Dual-Stack Link Sense IndicationsStefan Brüns
[ Upstream commit 5a70348e1187c5bf1cbd0ec51843f36befed1c2d ] If a context is configured as dualstack ("IPv4v6"), the modem indicates the context activation with a slightly different indication message. The dual-stack indication omits the link_type (IPv4/v6) and adds additional address fields. IPv6 LSIs are identical to IPv4 LSIs, but have a different link type. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17sierra_net: Skip validating irrelevant fields for IDLE LSIsStefan Brüns
[ Upstream commit 764895d3039e903dac3a70f219949efe43d036a0 ] When the context is deactivated, the link_type is set to 0xff, which triggers a warning message, and results in a wrong link status, as the LSI is ignored. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-07qmi_wwan: add another Lenovo EM74xx device IDBjørn Mork
[ Upstream commit 486181bcb3248e2f1977f4e69387a898234a4e1e ] In their infinite wisdom, and never ending quest for end user frustration, Lenovo has decided to use a new USB device ID for the wwan modules in their 2017 laptops. The actual hardware is still the Sierra Wireless EM7455 or EM7430, depending on region. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14net: usb: qmi_wwan: add Telit ME910 supportDaniele Palmas
[ Upstream commit 4c54dc0277d0d55a9248c43aebd31858f926a056 ] This patch adds support for Telit ME910 PID 0x1100. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-30qmi_wwan: add Dell DW5811eBjørn Mork
[ Upstream commit 6bd845d1cf98b45c634baacb8381436dad3c2dd0 ] This is a Dell branded Sierra Wireless EM7455. It is operating in MBIM mode by default, but can be configured to provide two QMI/RMNET functions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-18catc: Use heap buffer for memory size testBen Hutchings
[ Upstream commit 2d6a0e9de03ee658a9adc3bfb2f0ca55dff1e478 ] Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-18catc: Combine failure cleanup code in catc_probe()Ben Hutchings
[ Upstream commit d41149145f98fe26dcd0bfd1d6cc095e6e041418 ] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-18rtl8150: Use heap buffers for all register accessBen Hutchings
[ Upstream commit 7926aff5c57b577ab0f43364ff0c59d968f6a414 ] Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-18pegasus: Use heap buffers for all register accessBen Hutchings
[ Upstream commit 5593523f968bc86d42a035c6df47d5e0979b5ace ] Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") References: https://bugs.debian.org/852556 Reported-by: Lisandro Damián Nicanor Pérez Meyer <lisandro@debian.org> Tested-by: Lisandro Damián Nicanor Pérez Meyer <lisandro@debian.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-04qmi_wwan/cdc_ether: add device ID for HP lt2523 (Novatel E371) WWAN cardBjørn Mork
[ Upstream commit 5b9f57516337b523f7466a53939aaaea7b78141b ] Another rebranded Novatel E371. qmi_wwan should drive this device, while cdc_ether should ignore it. Even though the USB descriptors are plain CDC-ETHER that USB interface is a QMI interface. Ref commit 7fdb7846c9ca ("qmi_wwan/cdc_ether: add device IDs for Dell 5804 (Novatel E371) WWAN card") Cc: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-04r8152: don't execute runtime suspend if the tx is not emptyhayeswang
[ Upstream commit 6a0b76c04ec157c88ca943debf78a8ee58469f2d ] Runtime suspend shouldn't be executed if the tx queue is not empty, because the device is not idle. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-04r8152: fix the sw rx checksum is unavailablehayeswang
[ Upstream commit 19c0f40d4fca3a47b8f784a627f0467f0138ccc8 ] Fix the hw rx checksum is always enabled, and the user couldn't switch it to sw rx checksum. Note that the RTL_VER_01 only support sw rx checksum only. Besides, the hw rx checksum for RTL_VER_02 is disabled after commit b9a321b48af4 ("r8152: Fix broken RX checksums."). Re-enable it. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-15r8152: fix rx issue for runtime suspendhayeswang
[ Upstream commit 75dc692eda114cb234a46cb11893a9c3ea520934 ] Pause the rx and make sure the rx fifo is empty when the autosuspend occurs. If the rx data comes when the driver is canceling the rx urb, the host controller would stop getting the data from the device and continue it after next rx urb is submitted. That is, one continuing data is split into two different urb buffers. That let the driver take the data as a rx descriptor, and unexpected behavior happens. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-15r8152: split rtl8152_suspend functionhayeswang
[ Upstream commit 8fb280616878b81c0790a0c33acbeec59c5711f4 ] Split rtl8152_suspend() into rtl8152_system_suspend() and rtl8152_rumtime_suspend(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-08NET: usb: cdc_mbim: add quirk for supporting Telit LE922ADaniele Palmas
Telit LE922A MBIM based composition does not work properly with altsetting toggle done in cdc_ncm_bind_common. This patch adds CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE quirk to avoid this procedure that, instead, is mandatory for other modems. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: usb: set error code when usb_alloc_urb failsPan Bian
In function lan78xx_probe(), variable ret takes the errno code on failures. However, when the call to usb_alloc_urb() fails, its value will keeps 0. 0 indicates success in the context, which is inconsistent with the execution result. This patch fixes the bug, assigning "-ENOMEM" to ret when usb_alloc_urb() returns a NULL pointer. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188771 Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02NET: usb: qmi_wwan: add support for Telit LE922A PID 0x1040Daniele Palmas
This patch adds support for PID 0x1040 of Telit LE922A. The qmi adapter requires to have DTR set for proper working, so QMI_WWAN_QUIRK_DTR has been enabled. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02cdc_ether: Fix handling connection notificationKristian Evensen
Commit bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling") introduced a work-around in usbnet_cdc_status() for devices that exported cdc carrier on twice on connect. Before the commit, this behavior caused the link state to be incorrect. It was assumed that all CDC Ethernet devices would either export this behavior, or send one off and then one on notification (which seems to be the default behavior). Unfortunately, it turns out multiple devices sends a connection notification multiple times per second (via an interrupt), even when connection state does not change. This has been observed with several different USB LAN dongles (at least), for example 13b1:0041 (Linksys). After bfe9b9d2df66, the link state has been set as down and then up for each notification. This has caused a flood of Netlink NEWLINK messages and syslog to be flooded with messages similar to: cdc_ether 2-1:2.0 eth1: kevent 12 may have been dropped This commit fixes the behavior by reverting usbnet_cdc_status() to how it was before bfe9b9d2df66. The work-around has been moved to a separate status-function which is only called when a known, affect device is detected. v1->v2: * Do not open-code netif_carrier_ok() (thanks Henning Schild). * Call netif_carrier_off() instead of usb_link_change(). This prevents calling schedule_work() twice without giving the work queue a chance to be processed (thanks Bjørn Mork). Fixes: bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling") Reported-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01net: asix: Fix AX88772_suspend() USB vendor commands failure issuesallan
The change fixes AX88772_suspend() USB vendor commands failure issues. Signed-off-by: Allan Chou <allan@asix.com.tw> Tested-by: Allan Chou <allan@asix.com.tw> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13r8152: Fix error path in open functionGuenter Roeck
If usb_submit_urb() called from the open function fails, the following crash may be observed. r8152 8-1:1.0 eth0: intr_urb submit failed: -19 ... r8152 8-1:1.0 eth0: v1.08.3 Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b7b pgd = ffffffc0e7305000 [6b6b6b6b6b6b6b7b] *pgd=0000000000000000, *pud=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP ... PC is at notifier_chain_register+0x2c/0x58 LR is at blocking_notifier_chain_register+0x54/0x70 ... Call trace: [<ffffffc0002407f8>] notifier_chain_register+0x2c/0x58 [<ffffffc000240bdc>] blocking_notifier_chain_register+0x54/0x70 [<ffffffc00026991c>] register_pm_notifier+0x24/0x2c [<ffffffbffc183200>] rtl8152_open+0x3dc/0x3f8 [r8152] [<ffffffc000808000>] __dev_open+0xac/0x104 [<ffffffc0008082f8>] __dev_change_flags+0xb0/0x148 [<ffffffc0008083c4>] dev_change_flags+0x34/0x70 [<ffffffc000818344>] do_setlink+0x2c8/0x888 [<ffffffc0008199d4>] rtnl_newlink+0x328/0x644 [<ffffffc000819e98>] rtnetlink_rcv_msg+0x1a8/0x1d4 [<ffffffc0008373c8>] netlink_rcv_skb+0x68/0xd0 [<ffffffc000817990>] rtnetlink_rcv+0x2c/0x3c [<ffffffc000836d1c>] netlink_unicast+0x16c/0x234 [<ffffffc00083720c>] netlink_sendmsg+0x340/0x364 [<ffffffc0007e85d0>] sock_sendmsg+0x48/0x60 [<ffffffc0007e9c30>] SyS_sendto+0xe0/0x120 [<ffffffc0007e9cb0>] SyS_send+0x40/0x4c [<ffffffc000203e34>] el0_svc_naked+0x24/0x28 Clean up error handling to avoid registering the notifier if the open function is going to fail. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09Net Driver: Add Cypress GX3 VID=04b4 PID=3610.Allan Chou
Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller (Vendor=04b4 ProdID=3610). Patch verified on x64 linux kernel 4.7.4, 4.8.6, 4.9-rc4 systems with the Kensington SD4600P USB-C Universal Dock with Power, which uses the Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller. A similar patch was signed-off and tested-by Allan Chou <allan@asix.com.tw> on 2015-12-01. Allan verified his similar patch on x86 Linux kernel 4.1.6 system with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller. Tested-by: Allan Chou <allan@asix.com.tw> Tested-by: Chris Roth <chris.roth@usask.ca> Tested-by: Artjom Simon <artjom.simon@gmail.com> Signed-off-by: Allan Chou <allan@asix.com.tw> Signed-off-by: Chris Roth <chris.roth@usask.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30r8152: Fix broken RX checksums.Mark Lord
The r8152 driver has been broken since (approx) 3.16.xx when support was added for hardware RX checksums on newer chip versions. Symptoms include random segfaults and silent data corruption over NFS. The hardware checksum logig does not work on the VER_02 dongles I have here when used with a slow embedded system CPU. Google reveals others reporting similar issues on Raspberry Pi. So, disable hardware RX checksum support for VER_02, and fix an obvious coding error for IPV6 checksums in the same function. Because this bug results in silent data corruption, it is a good candidate for back-porting to -stable >= 3.16.xx. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27kalmia: avoid potential uninitialized variable useArnd Bergmann
The kalmia_send_init_packet() returns zero or a negative return code, but gcc has no way of knowing that there cannot be a positive return code, so it determines that copying the ethernet address at the end of kalmia_bind() will access uninitialized data: drivers/net/usb/kalmia.c: In function ‘kalmia_bind’: arch/x86/include/asm/string_32.h:78:22: error: ‘*((void *)&ethernet_addr+4)’ may be used uninitialized in this function [-Werror=maybe-uninitialized] *((short *)to + 2) = *((short *)from + 2); ^ drivers/net/usb/kalmia.c:138:5: note: ‘*((void *)&ethernet_addr+4)’ was declared here This warning is harmless, but for consistency, we should make the check for the return code match what the driver does everywhere else and just progate it, which then gets rid of the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14net: asix: Avoid looping when the device does not respondGuenter Roeck
Check answers from USB stack and avoid re-sending the request multiple times if the device does not respond. This fixes the following problem, observed with a probably flaky adapter. [62108.732707] usb 1-3: new high-speed USB device number 5 using xhci_hcd [62108.914421] usb 1-3: New USB device found, idVendor=0b95, idProduct=7720 [62108.914463] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [62108.914476] usb 1-3: Product: AX88x72A [62108.914486] usb 1-3: Manufacturer: ASIX Elec. Corp. [62108.914495] usb 1-3: SerialNumber: 000001 [62114.109109] asix 1-3:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -110 [62114.109139] asix 1-3:1.0 (unnamed net_device) (uninitialized): Failed to send software reset: ffffff92 [62119.109048] asix 1-3:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -110 ... Since the USB timeout is 5 seconds, and the operation is retried 30 times, this results in [62278.180353] INFO: task mtpd:1725 blocked for more than 120 seconds. [62278.180373] Tainted: G W 3.18.0-13298-g94ace9e #1 [62278.180383] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ... [62278.180957] kworker/2:0 D 0000000000000000 0 5744 2 0x00000000 [62278.180978] Workqueue: usb_hub_wq hub_event [62278.181029] ffff880177f833b8 0000000000000046 ffff88017fd00000 ffff88017b126d80 [62278.181048] ffff880177f83fd8 ffff880065a71b60 0000000000013340 ffff880065a71b60 [62278.181065] 0000000000000286 0000000103b1c199 0000000000001388 0000000000000002 [62278.181081] Call Trace: [62278.181092] [<ffffffff8e0971fd>] ? console_conditional_schedule+0x2c/0x2c [62278.181105] [<ffffffff8e094f7b>] schedule+0x69/0x6b [62278.181117] [<ffffffff8e0972e0>] schedule_timeout+0xe3/0x11d [62278.181133] [<ffffffff8daadb1b>] ? trace_timer_start+0x51/0x51 [62278.181146] [<ffffffff8e095a05>] do_wait_for_common+0x12f/0x16c [62278.181162] [<ffffffff8da856a7>] ? wake_up_process+0x39/0x39 [62278.181174] [<ffffffff8e095aee>] wait_for_common+0x52/0x6d [62278.181187] [<ffffffff8e095b3b>] wait_for_completion_timeout+0x13/0x15 [62278.181201] [<ffffffff8de676ce>] usb_start_wait_urb+0x93/0xf1 [62278.181214] [<ffffffff8de6780d>] usb_control_msg+0xe1/0x11d [62278.181230] [<ffffffffc037d629>] usbnet_write_cmd+0x9c/0xc6 [usbnet] [62278.181286] [<ffffffffc03af793>] asix_write_cmd+0x4e/0x7e [asix] [62278.181300] [<ffffffffc03afb41>] asix_set_sw_mii+0x25/0x4e [asix] [62278.181314] [<ffffffffc03b001d>] asix_mdio_read+0x51/0x109 [asix] ... Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13qmi_wwan: add support for Quectel EC21 and EC25Bjørn Mork
The Quectel EC21 and EC25 need the same "set DTR" request as devices based on the MDM9230 chipset, but has no USB3 support. Our best guess is that the "set DTR" functionality depends on chipset and/or baseband firmware generation. But USB3 is still an optional feature. Since we cannot enable this unconditionally for all older devices, and there doesn't appear to be anything we can use in the USB descriptors to identify these chips, we are forced to use a device specific quirk flag. Reported-and-tested-by: Sebastian Sjoholm <sebastian.sjoholm@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2016-09-21r8152: disable ALDPS and EEE before setting PHYhayeswang
Disable ALDPS and EEE to avoid the possible failure when setting the PHY. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21r8152: remove r8153_enable_eeehayeswang
Remove r8153_enable_eee(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21r8152: move PHY settings to hw_phy_cfghayeswang
Move the PHY relative settings together to hw_phy_cfg(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21r8152: move enabling PHYhayeswang
Move enabling PHY to init(), otherwise some other settings may fail. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21r8152: move some functionshayeswang
Move the following functions forward. r8152_mmd_indirect() r8152_mmd_read() r8152_mmd_write() r8152_eee_en() r8152b_enable_eee() r8153_eee_en() r8153_enable_eee() r8152b_enable_fc() r8153_aldps_en() Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-07kaweth: remove obsolete debugging statementsOliver Neukum
SOme statements in the driver only served to inform which functions were entered. Ftrace can do that just as good without needing memory. Remove the statements. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06lan78xx: mark symbols static where possibleBaoyou Xie
We get a few warnings when building kernel with W=1: drivers/net/usb/lan78xx.c:1182:6: warning: no previous prototype for 'lan78xx_defer_kevent' [-Wmissing-prototypes] drivers/net/usb/lan78xx.c:1409:5: warning: no previous prototype for 'lan78xx_nway_reset' [-Wmissing-prototypes] drivers/net/usb/lan78xx.c:2000:5: warning: no previous prototype for 'lan78xx_set_mac_addr' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06hso: Convert printk to pr_<level>Joe Perches
Use a more common logging style Miscellanea: o Add pr_fmt to prefix each output message o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 05:03:53 +0000