summaryrefslogtreecommitdiff
path: root/drivers/net/phy
AgeCommit message (Collapse)Author
2022-09-20net: sfp: re-implement soft state polling setupRussell King (Oracle)
Re-implement the decision making for soft state polling. Instead of generating the soft state mask in sfp_soft_start_poll() by looking at which GPIOs are available, record their availability in sfp_sm_mod_probe() in sfp->state_hw_mask. This will then allow us to clear bits in sfp->state_hw_mask in module specific quirks when the hardware signals should not be used, thereby allowing us to switch to using the software state polling. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20net: phy: adin1100: add PHY IDs of adin1110/adin2111Alexandru Tachici
Add additional PHY IDs for the internal PHYs of adin1110 and adin2111. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-19net: phy: micrel: Cable Diag feature for lan8814 phyDivya Koppera
Support for Cable Diagnostics in lan8814 phy Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220909083123.30134-1-Divya.Koppera@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-15net: phy: spi_ks8895: switch to using gpiod APIDmitry Torokhov
This patch switches the driver away from legacy gpio/of_gpio API to gpiod API, and removes use of of_get_named_gpio_flags() which I want to make private to gpiolib. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220906204922.3789922-3-dmitry.torokhov@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-13net: phy: aquantia: wait for the suspend/resume operations to finishIoana Ciornei
The Aquantia datasheet notes that after issuing a Processor-Intensive MDIO operation, like changing the low-power state of the device, the driver should wait for the operation to finish before issuing a new MDIO command. The new aqr107_wait_processor_intensive_op() function is added which can be used after these kind of MDIO operations. At the moment, we are only adding it at the end of the suspend/resume calls. The issue was identified on a board featuring the AQR113C PHY, on which commands like 'ip link (..) up / down' issued without any delays between them would render the link on the PHY to remain down. The issue was easy to reproduce with a one-liner: $ ip link set dev ethX down; ip link set dev ethX up; \ ip link set dev ethX down; ip link set dev ethX up; Fixes: ac9e81c230eb ("net: phy: aquantia: add suspend / resume callbacks for AQR107 family") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220906130451.1483448-1-ioana.ciornei@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
drivers/net/ethernet/freescale/fec.h 7d650df99d52 ("net: fec: add pm_qos support on imx6q platform") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-08net: phy: lan87xx: change interrupt src of link_up to comm_readyArun Ramadoss
Currently phy link up/down interrupt is enabled using the LAN87xx_INTERRUPT_MASK register. In the lan87xx_read_status function, phy link is determined using the T1_MODE_STAT_REG register comm_ready bit. comm_ready bit is set using the loc_rcvr_status & rem_rcvr_status. Whenever the phy link is up, LAN87xx_INTERRUPT_SOURCE link_up bit is set first but comm_ready bit takes some time to set based on local and remote receiver status. As per the current implementation, interrupt is triggered using link_up but the comm_ready bit is still cleared in the read_status function. So, link is always down. Initially tested with the shared interrupt mechanism with switch and internal phy which is working, but after implementing interrupt controller it is not working. It can fixed either by updating the read_status function to read from LAN87XX_INTERRUPT_SOURCE register or enable the interrupt mask for comm_ready bit. But the validation team recommends the use of comm_ready for link detection. This patch fixes by enabling the comm_ready bit for link_up in the LAN87XX_INTERRUPT_MASK_2 register (MISC Bank) and link_down in LAN87xx_INTERRUPT_MASK register. Fixes: 8a1b415d70b7 ("net: phy: added ethtool master-slave configuration support") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220905152750.5079-1-arun.ramadoss@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-05net: phy: Add 1000BASE-KX interface modeSean Anderson
Add 1000BASE-KX interface mode. This 1G backplane ethernet as described in clause 70. Clause 73 autonegotiation is mandatory, and only full duplex operation is supported. Although at the PMA level this interface mode is identical to 1000BASE-X, it uses a different form of in-band autonegation. This justifies a separate interface mode, since the interface mode (along with the MLO_AN_* autonegotiation mode) sets the type of autonegotiation which will be used on a link. This results in more than just electrical differences between the link modes. With regard to 1000BASE-X, 1000BASE-KX holds a similar position to SGMII: same signaling, but different autonegotiation. PCS drivers (which typically handle in-band autonegotiation) may only support 1000BASE-X, and not 1000BASE-KX. Similarly, the phy mode is used to configure serdes phys with phy_set_mode_ext. Due to the different electrical standards (SFI or XFI vs Clause 70), they will likely want to use different configuration. Adding a phy interface mode for 1000BASE-KX helps simplify configuration in these areas. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-01Revert "net: phy: meson-gxl: improve link-up behavior"Heiner Kallweit
This reverts commit 2c87c6f9fbddc5b84d67b2fa3f432fcac6d99d93. Meanwhile it turned out that the following commit is the proper workaround for the issue that 2c87c6f9fbdd tries to address. a3a57bf07de2 ("net: stmmac: work around sporadic tx issue on link-up") It's nor clear why the to be reverted commit helped for one user, for others it didn't make a difference. Fixes: 2c87c6f9fbdd ("net: phy: meson-gxl: improve link-up behavior") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/8deeeddc-6b71-129b-1918-495a12dc11e3@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
tools/testing/selftests/net/.gitignore sort the net-next version and use it Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220830201457.7984-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: phy: smsc: use device-managed clock APIHeiner Kallweit
Simplify the code by using the device-managed clock API. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/b222be68-ba7e-999d-0a07-eca0ecedf74e@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-30net: phy: micrel: Make the GPIO to be non-exclusiveHoratiu Vultur
The same GPIO line can be shared by multiple phys for the coma mode pin. If that is the case then, all the other phys that share the same line will failed to be probed because the access to the gpio line is not non-exclusive. Fix this by making access to the gpio line to be nonexclusive using flag GPIOD_FLAGS_BIT_NONEXCLUSIVE. This allows all the other PHYs to be probed. Fixes: 738871b09250ee ("net: phy: micrel: add coma mode GPIO") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220830064055.2340403-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-26net: phylink: allow RGMII/RTBI in-band statusQingfang DENG
As per RGMII specification v2.0, section 3.4.1, RGMII/RTBI has an optional in-band status feature where the PHY's link status, speed and duplex mode can be passed to the MAC. Allow RGMII/RTBI to use in-band status. Signed-off-by: Qingfang DENG <dqfext@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c 21234e3a84c7 ("net/mlx5e: Fix use after free in mlx5e_fs_init()") c7eafc5ed068 ("net/mlx5e: Convert ethtool_steering member of flow_steering struct to pointer") https://lore.kernel.org/all/20220825104410.67d4709c@canb.auug.org.au/ https://lore.kernel.org/all/20220823055533.334471-1-saeed@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23net: phy: tja11xx: add interface mode and RMII REF_CLK supportWei Fang
Add below features support for both TJA1100 and TJA1101 cards: - Add MII and RMII mode support. - Add REF_CLK input/output support for RMII mode. Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-22net: phy: Don't WARN for PHY_READY state in mdio_bus_phy_resume()Xiaolei Wang
For some MAC drivers, they set the mac_managed_pm to true in its ->ndo_open() callback. So before the mac_managed_pm is set to true, we still want to leverage the mdio_bus_phy_suspend()/resume() for the phy device suspend and resume. In this case, the phy device is in PHY_READY, and we shouldn't warn about this. It also seems that the check of mac_managed_pm in WARN_ON is redundant since we already check this in the entry of mdio_bus_phy_resume(), so drop it. Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220819082451.1992102-1-xiaolei.wang@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-22net: phy: Add helper to derive the number of ports from a phy modeMaxime Chevallier
Some phy modes such as QSGMII multiplex several MAC<->PHY links on one single physical interface. QSGMII used to be the only one supported, but other modes such as QUSGMII also carry multiple links. This helper allows getting the number of links that are multiplexed on a given interface. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-22net: phy: Introduce QUSGMII PHY modeMaxime Chevallier
The QUSGMII mode is a derivative of Cisco's USXGMII standard. This standard is pretty similar to SGMII, but allows for faster speeds, and has the build-in bits for Quad and Octa variants (like QSGMII). The main difference with SGMII/QSGMII is that USXGMII/QUSGMII re-uses the preamble to carry various information, named 'Extensions'. As of today, the USXGMII standard only mentions the "PCH" extension, which is used to convey timestamps, allowing in-band signaling of PTP timestamps without having to modify the frame itself. This commit adds support for that mode. When no extension is in use, it behaves exactly like QSGMII, although it's not compatible with QSGMII. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-22net: phy: realtek: add support for RTL8211F(D)(I)-VD-CGClark Wang
RTL8211F(D)(I)-VD-CG is the pin-to-pin upgrade chip from RTL8211F(D)(I)-CG. Add new PHY ID for this chip. It does not support RTL8211F_PHYCR2 anymore, so remove the w/r operation of this register. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-18net: phy: at803x: add disable hibernation mode supportWei Fang
When the cable is unplugged, the Atheros AR803x PHYs will enter hibernation mode after about 10 seconds if the hibernation mode is enabled and will not provide any clock to the MAC. But for some MACs, this feature might cause unexpected issues due to the logic of MACs. Taking SYNP MAC (stmmac) as an example, if the cable is unplugged and the "eth0" interface is down, the AR803x PHY will enter hibernation mode. Then perform the "ifconfig eth0 up" operation, the stmmac can't be able to complete the software reset operation and fail to init it's own DMA. Therefore, the "eth0" interface is failed to ifconfig up. Why does it cause this issue? The truth is that the software reset operation of the stmmac is designed to depend on the RX_CLK of PHY. So, this patch offers an option for the user to determine whether to disable the hibernation mode of AR803x PHYs. Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17net: sfp: use simplified HWMON_CHANNEL_INFO macroBeniamin Sandu
This makes the code look cleaner and easier to read. Signed-off-by: Beniamin Sandu <beniaminsandu@gmail.com> Link: https://lore.kernel.org/r/20220813204658.848372-1-beniaminsandu@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17net: phy: broadcom: Implement suspend/resume for AC131 and BCM5241Florian Fainelli
Implement the suspend/resume procedure for the Broadcom AC131 and BCM5241 type of PHYs (10/100 only) by entering the standard power down followed by the proprietary standby mode in the auxiliary mode 4 shadow register. On resume, the PHY software reset is enough to make it come out of standby mode so we can utilize brcm_fet_config_init() as the resume hook. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08net: phy: dp83867: fix get nvmem cell failNikita Shubin
If CONFIG_NVMEM is not set of_nvmem_cell_get, of_nvmem_device_get functions will return ERR_PTR(-EOPNOTSUPP) and "failed to get nvmem cell io_impedance_ctrl" error would be reported despite "io_impedance_ctrl" is completely missing in Device Tree and we should use default values. Check -EOPNOTSUPP togather with -ENOENT to avoid this situation. Fixes: 5c2d0a6a0701 ("net: phy: dp83867: implement support for io_impedance_ctrl nvmem cell") Signed-off-by: Nikita Shubin <n.shubin@yadro.com> Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220805084843.24542-1-nikita.shubin@maquefel.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-08net: phy: c45 baset1: do not skip aneg configuration if clock role is not ↵Oleksij Rempel
specified In case master/slave clock role is not specified (which is default), the aneg registers will not be written. The visible impact of this is missing pause advertisement. So, rework genphy_c45_baset1_an_config_aneg() to be able to write advertisement registers even if clock role is unknown. Fixes: 3da8ffd8545f ("net: phy: Add 10BASE-T1L support in phy-c45") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220805073159.908643-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-03net: phy: Warn about incorrect mdio_bus_phy_resume() stateFlorian Fainelli
Calling mdio_bus_phy_resume() with neither the PHY state machine set to PHY_HALTED nor phydev->mac_managed_pm set to true is a good indication that we can produce a race condition looking like this: CPU0 CPU1 bcmgenet_resume -> phy_resume -> phy_init_hw -> phy_start -> phy_resume phy_start_aneg() mdio_bus_phy_resume -> phy_resume -> phy_write(..., BMCR_RESET) -> usleep() -> phy_read() with the phy_resume() function triggering a PHY behavior that might have to be worked around with (see bf8bfc4336f7 ("net: phy: broadcom: Fix brcm_fet_config_init()") for instance) that ultimately leads to an error reading from the PHY. Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220801233403.258871-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-13net: phy: mxl-gpy: print firmware in human readable formMichael Walle
Now having a major and a minor number, also print the firmware in human readable form "major.minor". Still keep the 4-digit hexadecimal representation because that form is used in the firmware changelog documents. Also, drop the "release" string assuming that most common case, but make it clearer that the user is running a test version. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13net: phy: mxl-gpy: rename the FW type field nameMichael Walle
Align the firmware field name with the reference manual where it is called "major". Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13net: phy: mxl-gpy: cache PHY firmware versionMichael Walle
Cache the firmware version during probe. There is no need to read the firmware version on every autonegotiation. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13net: phy: mxl-gpy: fix version reportingMichael Walle
The commit 09ce6b20103b ("net: phy: mxl-gpy: add temperature sensor") will overwrite the return value and the reported version will be wrong. Fix it. Fixes: 09ce6b20103b ("net: phy: mxl-gpy: add temperature sensor") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-08net: phylink: fix SGMII inband autoneg enableRussell King (Oracle)
When we are operating in SGMII inband mode, it implies that there is a PHY connected, and the ethtool advertisement for autoneg applies to the PHY, not the SGMII link. When in 1000base-X mode, then this applies to the 802.3z link and needs to be applied to the PCS. Fix this. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1o9Ng2-005Qbe-3H@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-04net: phy: broadcom: Add support for BCM53128 internal PHYsKurt Kanzenbach
Add support for BCM53128 internal PHYs. These support interrupts as well as statistics. Therefore, enable the Broadcom PHY driver for them. Tested on BCM53128 switch using the mainline b53 DSA driver. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02net: phy: micrel: Adding LED feature for LAN8814 PHYDivya Koppera
LED support for extended mode where LED 1: Enhanced Mode 5 (10M/1000M/Activity) LED 2: Enhanced Mode 4 (100M/1000M/Activity) By default it supports KSZ9031 LED mode Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.c 9c5de246c1db ("net: sparx5: mdb add/del handle non-sparx5 devices") fbb89d02e33a ("net: sparx5: Allow mdb entries to both CPU and ports") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30net: phylink: fix NULL pl->pcs dereference during phylink_pcs_poll_startVladimir Oltean
The current link mode of the phylink instance may not require an attached PCS. However, phylink_major_config() unconditionally dereferences this potentially NULL pointer when restarting the link poll timer, which will panic the kernel. Fix the problem by checking whether a PCS exists in phylink_pcs_poll_start(), otherwise do nothing. The code prior to the blamed patch also only looked at pcs->poll within an "if (pcs)" block. Fixes: bfac8c490d60 ("net: phylink: disable PCS polling over major configuration") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by: Gerhard Engleder <gerhard@engleder-embedded.com> Tested-by: Michael Walle <michael@walle.cc> # on kontron-kbox-a-230-ls Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> # on sam9x60ek Link: https://lore.kernel.org/r/20220629193358.4007923-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30net: sfp: fix memory leak in sfp_probe()Jianglei Nie
sfp_probe() allocates a memory chunk from sfp with sfp_alloc(). When devm_add_action() fails, sfp is not freed, which leads to a memory leak. We should use devm_add_action_or_reset() instead of devm_add_action(). Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220629075550.2152003-1-niejianglei2021@163.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-29net: phy: ax88772a: fix lost pause advertisement configurationOleksij Rempel
In case of asix_ax88772a_link_change_notify() workaround, we run soft reset which will automatically clear MII_ADVERTISE configuration. The PHYlib framework do not know about changed configuration state of the PHY, so we need use phy_init_hw() to reinit PHY configuration. Fixes: dde258469257 ("net: usb/phy: asix: add support for ax88772A/C PHYs") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220628114349.3929928-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-29net: phy: Don't trigger state machine while in suspendLukas Wunner
Upon system sleep, mdio_bus_phy_suspend() stops the phy_state_machine(), but subsequent interrupts may retrigger it: They may have been left enabled to facilitate wakeup and are not quiesced until the ->suspend_noirq() phase. Unwanted interrupts may hence occur between mdio_bus_phy_suspend() and dpm_suspend_noirq(), as well as between dpm_resume_noirq() and mdio_bus_phy_resume(). Retriggering the phy_state_machine() through an interrupt is not only undesirable for the reason given in mdio_bus_phy_suspend() (freezing it midway with phydev->lock held), but also because the PHY may be inaccessible after it's suspended: Accesses to USB-attached PHYs are blocked once usb_suspend_both() clears the can_submit flag and PHYs on PCI network cards may become inaccessible upon suspend as well. Amend phy_interrupt() to avoid triggering the state machine if the PHY is suspended. Signal wakeup instead if the attached net_device or its parent has been configured as a wakeup source. (Those conditions are identical to mdio_bus_phy_may_suspend().) Postpone handling of the interrupt until the PHY has resumed. Before stopping the phy_state_machine() in mdio_bus_phy_suspend(), wait for a concurrent phy_interrupt() to run to completion. That is necessary because phy_interrupt() may have checked the PHY's suspend status before the system sleep transition commenced and it may thus retrigger the state machine after it was stopped. Likewise, after re-enabling interrupt handling in mdio_bus_phy_resume(), wait for a concurrent phy_interrupt() to complete to ensure that interrupts which it postponed are properly rerun. The issue was exposed by commit 1ce8b37241ed ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling"), but has existed since forever. Fixes: 541cd3ee00a4 ("phylib: Fix deadlock on resume") Link: https://lore.kernel.org/netdev/a5315a8a-32c2-962f-f696-de9a26d30091@samsung.com/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable@vger.kernel.org # v2.6.33+ Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/b7f386d04e9b5b0e2738f0125743e30676f309ef.1656410895.git.lukas@wunner.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28net: phylink: disable PCS polling over major configurationRussell King (Oracle)
While we are performing a major configuration, there is no point having the PCS polling timer running. Stop it before we begin preparing for the configuration change, and restart it only once we've successfully completed the change. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28net: phylink: remove pcs_ops memberRussell King (Oracle)
Remove the pcs_ops member from struct phylink, using the one stored in struct phylink_pcs instead. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-24net: dp83822: disable rx error interruptEnguerrand de Ribaucourt
Some RX errors, notably when disconnecting the cable, increase the RCSR register. Once half full (0x7fff), an interrupt flood is generated. I measured ~3k/s interrupts even after the RX errors transfer was stopped. Since we don't read and clear the RCSR register, we should disable this interrupt. Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission") Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-24net: dp83822: disable false carrier interruptEnguerrand de Ribaucourt
When unplugging an Ethernet cable, false carrier events were produced by the PHY at a very high rate. Once the false carrier counter full, an interrupt was triggered every few clock cycles until the cable was replugged. This resulted in approximately 10k/s interrupts. Since the false carrier counter (FCSCR) is never used, we can safely disable this interrupt. In addition to improving performance, this also solved MDIO read timeouts I was randomly encountering with an i.MX8 fec MAC because of the interrupt flood. The interrupt count and MDIO timeout fix were tested on a v5.4.110 kernel. Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission") Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-24net: phylink: add QSGMII support to phylink_mii_c22_pcs_encode_advertisement()Russell King (Oracle)
The QSGMII MAC-to-PHY reply is the same as the SGMII MAC-to-PHY reply. Add support for this to phylink_mii_c22_pcs_encode_advertisement(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-23net: phy: mxl-gpy: add temperature sensorMichael Walle
The GPY115 and GPY2xx PHYs contain an integrated temperature sensor. It accuracy is +/- 5°C. Add support for it. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220622141716.3517645-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-23net: phy: nxp-tja11xx: use devm_hwmon_sanitize_name()Michael Walle
Instead of open-coding the bad characters replacement in the hwmon name, use the new devm_hwmon_sanitize_name(). Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-23net: sfp: use hwmon_sanitize_name()Michael Walle
Instead of open-coding the bad characters replacement in the hwmon name, use the new hwmon_sanitize_name(). Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-23net: phy: Add support for 1PPS out and external timestampsJonathan Lemon
The perout function is used to generate a 1PPS signal, synchronized to the PHC. This is accomplished by a using the hardware oneshot functionality, which is reset by a timer. The external timestamp function is set up for a 1PPS input pulse, and uses a timer to poll for temestamps. Both functions use the SYNC_OUT/SYNC_IN1 pin, so cannot run simultaneously. Co-developed-by: Lasse Johnsen <l@ssejohnsen.me> Signed-off-by: Lasse Johnsen <l@ssejohnsen.me> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-23net: phy: broadcom: Add PTP support for some Broadcom PHYs.Jonathan Lemon
This adds PTP support for BCM54210E Broadcom PHYs, in particular, the BCM54213PE, as used in the Rasperry PI CM4. It has only been tested on that hardware. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-23net: phy: broadcom: Add Broadcom PTP hooks to bcm-phy-libJonathan Lemon
Add 'struct bcm_ptp_private' to bcm54xx_phy_priv which points to an optional PTP structure attached to the PHY. This is allocated on probe if PHY PTP support is configured, and if the driver supports PTP for the specified PHY. Add the bcm_ptp_probe(), bcm_ptp_config_init() and bcn_ptp_stop() API functions to the bcm-phy library. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 19:16:26 +0000