summaryrefslogtreecommitdiff
path: root/drivers/net/phy
AgeCommit message (Collapse)Author
2019-08-14net: phy: realtek: add NBase-T PHY auto-detectionHeiner Kallweit
Realtek provided information on how the new NIC-integrated PHY's expose whether they support 2.5G/5G/10G. This allows to automatically differentiate 1Gbps and 2.5Gbps PHY's, and therefore allows to remove the fake PHY ID mechanism for RTL8125. So far RTL8125 supports 2.5Gbps only, but register layout for faster modes has been defined already, so let's use this information to be future-proof. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-13net: phy: consider AN_RESTART status when reading link statusHeiner Kallweit
After configuring and restarting aneg we immediately try to read the link status. On some systems the PHY may not yet have cleared the "aneg complete" and "link up" bits, resulting in a false link-up signal. See [0] for a report. Clause 22 and 45 both require the PHY to keep the AN_RESTART bit set until the PHY actually starts auto-negotiation. Let's consider this in the generic functions for reading link status. The commit marked as fixed is the first one where the patch applies cleanly. [0] https://marc.info/?t=156518400300003&r=1&w=2 Fixes: c1164bb1a631 ("net: phy: check PMAPMD link status only in genphy_c45_read_link") Tested-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-13net: phy: let phy_speed_down/up support speeds >1GbpsHeiner Kallweit
So far phy_speed_down/up can be used up to 1Gbps only. Remove this restriction by using new helper __phy_speed_down. New member adv_old in struct phy_device is used by phy_speed_up to restore the advertised modes before calling phy_speed_down. Don't simply advertise what is supported because a user may have intentionally removed modes from advertisement. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-13net: phy: add phy_speed_down_core and phy_resolve_min_speedHeiner Kallweit
phy_speed_down_core provides most of the functionality for phy_speed_down. It makes use of new helper phy_resolve_min_speed that is based on the sorting of the settings[] array. In certain cases it may be helpful to be able to exclude legacy half duplex modes, therefore prepare phy_resolve_min_speed() for it. v2: - rename __phy_speed_down to phy_speed_down_core Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-13net: phy: add __set_linkmode_max_speedHeiner Kallweit
We will need the functionality of __set_linkmode_max_speed also for linkmode bitmaps other than phydev->supported. Therefore split it. v2: - remove unused parameter from __set_linkmode_max_speed Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-12net: phy: at803x: stop switching phy delay config needlesslyAndré Draszik
This driver does a funny dance disabling and re-enabling RX and/or TX delays. In any of the RGMII-ID modes, it first disables the delays, just to re-enable them again right away. This looks like a needless exercise. Just enable the respective delays when in any of the relevant 'id' modes, and disable them otherwise. Also, remove comments which don't add anything that can't be seen by looking at the code. Signed-off-by: André Draszik <git@andred.net> CC: Andrew Lunn <andrew@lunn.ch> CC: Florian Fainelli <f.fainelli@gmail.com> CC: Heiner Kallweit <hkallweit1@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-11net: phy: realtek: add support for the 2.5Gbps PHY in RTL8125Heiner Kallweit
This adds support for the integrated 2.5Gbps PHY in Realtek RTL8125. Advertisement of 2.5Gbps mode is done via a vendor-specific register. Same applies to reading NBase-T link partner advertisement. Unfortunately this 2.5Gbps PHY shares the PHY ID with the integrated 1Gbps PHY's in other Realtek network chips and so far no method is known to differentiate them. As a workaround use a dedicated fake PHY ID that is set by the network driver by intercepting the MDIO PHY ID read. v2: - Create dedicated PHY driver and use a fake PHY ID that is injected by the network driver. Suggested by Andrew Lunn. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-11net: phy: add phy_modify_paged_changedHeiner Kallweit
Add helper function phy_modify_paged_changed, behavios is the same as for phy_modify_changed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-11net: phy: prepare phylib to deal with PHY's extending Clause 22Heiner Kallweit
The integrated PHY in 2.5Gbps chip RTL8125 is the first (known to me) PHY that uses standard Clause 22 for all modes up to 1Gbps and adds 2.5Gbps control using vendor-specific registers. To use phylib for the standard part little extensions are needed: - Move most of genphy_config_aneg to a new function __genphy_config_aneg that takes a parameter whether restarting auto-negotiation is needed (depending on whether content of vendor-specific advertisement register changed). - Don't clear phydev->lp_advertising in genphy_read_status so that we can set non-C22 mode flags before. Basically both changes mimic the behavior of the equivalent Clause 45 functions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-11net: phy: simplify genphy_config_advert by using the linkmode_adv_to_xxx_t ↵Heiner Kallweit
functions Using linkmode_adv_to_mii_adv_t and linkmode_adv_to_mii_ctrl1000_t allows to simplify the code. In addition avoiding the conversion to the legacy u32 advertisement format allows to remove the warning. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Just minor overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06net: mdio-octeon: Fix Kconfig warnings and build errorsNathan Chancellor
After commit 171a9bae68c7 ("staging/octeon: Allow test build on !MIPS"), the following combination of configs cause a few Kconfig warnings and build errors (distilled from arm allyesconfig and Randy's randconfig builds): CONFIG_NETDEVICES=y CONFIG_STAGING=y CONFIG_COMPILE_TEST=y and CONFIG_OCTEON_ETHERNET as either a module or built-in. WARNING: unmet direct dependencies detected for MDIO_OCTEON Depends on [n]: NETDEVICES [=y] && MDIO_DEVICE [=y] && MDIO_BUS [=y] && 64BIT [=n] && HAS_IOMEM [=y] && OF_MDIO [=n] Selected by [y]: - OCTEON_ETHERNET [=y] && STAGING [=y] && (CAVIUM_OCTEON_SOC || COMPILE_TEST [=y]) && NETDEVICES [=y] In file included from ../drivers/net/phy/mdio-octeon.c:14: ../drivers/net/phy/mdio-cavium.h:111:36: error: implicit declaration of function ‘writeq’; did you mean ‘writel’? [-Werror=implicit-function-declaration] 111 | #define oct_mdio_writeq(val, addr) writeq(val, (void *)addr) | ^~~~~~ CONFIG_64BIT is not strictly necessary if the proper readq/writeq definitions are included from io-64-nonatomic-lo-hi.h. CONFIG_OF_MDIO is not needed when CONFIG_COMPILE_TEST is enabled because of commit f9dc9ac51610 ("of/mdio: Add dummy functions in of_mdio.h."). Fixes: 171a9bae68c7 ("staging/octeon: Allow test build on !MIPS") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Mark Brown <broonie@kernel.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02net: phy: fix race in genphy_update_linkHeiner Kallweit
In phy_start_aneg() autoneg is started, and immediately after that link and autoneg status are read. As reported in [0] it can happen that at time of this read the PHY has reset the "aneg complete" bit but not yet the "link up" bit, what can result in a false link-up detection. To fix this don't report link as up if we're in aneg mode and PHY doesn't signal "aneg complete". [0] https://marc.info/?t=156413509900003&r=1&w=2 Fixes: 4950c2ba49cc ("net: phy: fix autoneg mismatch case in genphy_read_status") Reported-by: liuyonglong <liuyonglong@huawei.com> Tested-by: liuyonglong <liuyonglong@huawei.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02net: phy: Add mdio-aspeedAndrew Jeffery
The AST2600 design separates the MDIO controllers from the MAC, which is where they were placed in the AST2400 and AST2500. Further, the register interface is reworked again, so now we have three possible different interface implementations, however this driver only supports the interface provided by the AST2600. The AST2400 and AST2500 will continue to be supported by the MDIO support embedded in the FTGMAC100 driver. The hardware supports both C22 and C45 mode, but for the moment only C22 support is implemented. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-01net: phy: xgene: use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31net: phy: phy_led_triggers: Fix a possible null-pointer dereference in ↵Jia-Ju Bai
phy_led_trigger_change_speed() In phy_led_trigger_change_speed(), there is an if statement on line 48 to check whether phy->last_triggered is NULL: if (!phy->last_triggered) When phy->last_triggered is NULL, it is used on line 52: led_trigger_event(&phy->last_triggered->trigger, LED_OFF); Thus, a possible null-pointer dereference may occur. To fix this bug, led_trigger_event(&phy->last_triggered->trigger, LED_OFF) is called when phy->last_triggered is not NULL. This bug is found by a static analysis tool STCheck written by the OSLAB group in Tsinghua University. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30net: phy: fixed_phy: print gpio error only if gpio node is presentHubert Feurstein
It is perfectly ok to not have an gpio attached to the fixed-link node. So the driver should not throw an error message when the gpio is missing. Fixes: 5468e82f7034 ("net: phy: fixed-phy: Drop GPIO from fixed_phy_add()") Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30drivers: Introduce device lookup variants by of_nodeSuzuki K Poulose
Introduce wrappers for {bus/driver/class}_find_device() to locate devices by its of_node. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: devicetree@vger.kernel.org Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: linux-i2c@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-spi@vger.kernel.org Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: Alan Tull <atull@kernel.org> Cc: linux-fpga@vger.kernel.org Cc: Peter Rosin <peda@axentia.se> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Thor Thayer <thor.thayer@linux.intel.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Peter Rosin <peda@axentia.se> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> # I2C part Acked-by: Moritz Fischer <mdf@kernel.org> # For FPGA part Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20190723221838.12024-3-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-27net: phylink: Fix flow control for fixed-linkRené van Dorst
In phylink_parse_fixedlink() the pl->link_config.advertising bits are AND with pl->supported, pl->supported is zeroed and only the speed/duplex modes and MII bits are set. So pl->link_config.advertising always loses the flow control/pause bits. By setting Pause and Asym_Pause bits in pl->supported, the flow control work again when devicetree "pause" is set in fixes-link node and the MAC advertise that is supports pause. Results with this patch. Legend: - DT = 'Pause' is set in the fixed-link in devicetree. - validate() = ‘Yes’ means phylink_set(mask, Pause) is set in the validate(). - flow = results reported my link is Up line. +-----+------------+-------+ | DT | validate() | flow | +-----+------------+-------+ | Yes | Yes | rx/tx | | No | Yes | off | | Yes | No | off | +-----+------------+-------+ Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: René van Dorst <opensource@vdorst.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-24net: phy: mscc: initialize stats arrayAndreas Schwab
The memory allocated for the stats array may contain arbitrary data. Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.") Fixes: 00d70d8e0e78 ("net: phy: mscc: add support for VSC8574 PHY") Fixes: a5afc1678044 ("net: phy: mscc: add support for VSC8584 PHY") Fixes: f76178dc5218 ("net: phy: mscc: add ethtool statistics counters") Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-24net: phylink: don't start and stop SGMII PHYs in SFP modules twiceArseny Solokha
SFP modules connected using the SGMII interface have their own PHYs which are handled by the struct phylink's phydev field. On the other hand, for the modules connected using 1000Base-X interface that field is not set. Since commit ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") phylink_start() ends up setting the phydev field using the sfp-bus infrastructure, which eventually calls phy_start() on it, and then calling phy_start() again on the same phydev from phylink_start() itself. Similar call sequence holds for phylink_stop(), only in the reverse order. This results in WARNs during network interface bringup and shutdown when a copper SFP module is connected, as phy_start() and phy_stop() are called twice in a row for the same phy_device: % ip link set up dev eth0 ------------[ cut here ]------------ called from state UP WARNING: CPU: 1 PID: 155 at drivers/net/phy/phy.c:895 phy_start+0x74/0xc0 Modules linked in: CPU: 1 PID: 155 Comm: backend Not tainted 5.2.0+ #1 NIP: c0227bf0 LR: c0227bf0 CTR: c004d224 REGS: df547720 TRAP: 0700 Not tainted (5.2.0+) MSR: 00029000 <CE,EE,ME> CR: 24002822 XER: 00000000 GPR00: c0227bf0 df5477d8 df5d7080 00000014 df9d2370 df9d5ac4 1f4eb000 00000001 GPR08: c061fe58 00000000 00000000 df5477d8 0000003c 100c8768 00000000 00000000 GPR16: df486a00 c046f1c8 c046eea0 00000000 c046e904 c0239604 db68449c 00000000 GPR24: e9083204 00000000 00000001 db684460 e9083404 00000000 db6dce00 db6dcc00 NIP [c0227bf0] phy_start+0x74/0xc0 LR [c0227bf0] phy_start+0x74/0xc0 Call Trace: [df5477d8] [c0227bf0] phy_start+0x74/0xc0 (unreliable) [df5477e8] [c023cad0] startup_gfar+0x398/0x3f4 [df547828] [c023cf08] gfar_enet_open+0x364/0x374 [df547898] [c029d870] __dev_open+0xe4/0x140 [df5478c8] [c029db70] __dev_change_flags+0xf0/0x188 [df5478f8] [c029dc28] dev_change_flags+0x20/0x54 [df547918] [c02ae304] do_setlink+0x310/0x818 [df547a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0 [df547c28] [c02b222c] rtnl_newlink+0x48/0x68 [df547c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c [df547c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0 [df547cd8] [c02cba3c] netlink_unicast+0x114/0x19c [df547d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0 [df547d58] [c027b668] sock_sendmsg_nosec+0x20/0x40 [df547d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc [df547e98] [c027df7c] __sys_sendmsg+0x68/0x84 [df547ef8] [c027e430] sys_socketcall+0x1a0/0x204 [df547f38] [c000d1d8] ret_from_syscall+0x0/0x38 --- interrupt: c01 at 0xfd4e030 LR = 0xfd4e010 Instruction dump: 813f0188 38800000 2b890005 419d0014 3d40c046 5529103a 394aa208 7c8a482e 3c60c046 3863a1b8 4cc63182 4be009a1 <0fe00000> 48000030 3c60c046 3863a1d0 ---[ end trace d4c095aeaf6ea998 ]--- and % ip link set down dev eth0 ------------[ cut here ]------------ called from state HALTED WARNING: CPU: 1 PID: 184 at drivers/net/phy/phy.c:858 phy_stop+0x3c/0x88 <...> Call Trace: [df581788] [c0228450] phy_stop+0x3c/0x88 (unreliable) [df581798] [c022d548] sfp_sm_phy_detach+0x1c/0x44 [df5817a8] [c022e8cc] sfp_sm_event+0x4b0/0x87c [df581848] [c022f04c] sfp_upstream_stop+0x34/0x44 [df581858] [c0225608] phylink_stop+0x7c/0xe4 [df581868] [c023c57c] stop_gfar+0x7c/0x94 [df581888] [c023c5b8] gfar_close+0x24/0x94 [df5818a8] [c0298688] __dev_close_many+0xdc/0xf8 [df5818c8] [c029db58] __dev_change_flags+0xd8/0x188 [df5818f8] [c029dc28] dev_change_flags+0x20/0x54 [df581918] [c02ae304] do_setlink+0x310/0x818 [df581a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0 [df581c28] [c02b222c] rtnl_newlink+0x48/0x68 [df581c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c [df581c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0 [df581cd8] [c02cba3c] netlink_unicast+0x114/0x19c [df581d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0 [df581d58] [c027b668] sock_sendmsg_nosec+0x20/0x40 [df581d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc [df581e98] [c027df7c] __sys_sendmsg+0x68/0x84 [df581ef8] [c027e430] sys_socketcall+0x1a0/0x204 [df581f38] [c000d1d8] ret_from_syscall+0x0/0x38 <...> ---[ end trace d4c095aeaf6ea999 ]--- SFP modules with the 1000Base-X interface are not affected. Place explicit calls to phy_start() and phy_stop() before enabling or after disabling an attached SFP module, where phydev is not yet set (or is already unset), so they will be made only from the inside of sfp-bus, if needed. Fixes: 217962615662 ("net: phy: warn if phy_start is called from invalid state") Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21net: phy: sfp: hwmon: Fix scaling of RX powerAndrew Lunn
The RX power read from the SFP uses units of 0.1uW. This must be scaled to units of uW for HWMON. This requires a divide by 10, not the current 100. With this change in place, sensors(1) and ethtool -m agree: sff2-isa-0000 Adapter: ISA adapter in0: +3.23 V temp1: +33.1 C power1: 270.00 uW power2: 200.00 uW curr1: +0.01 A Laser output power : 0.2743 mW / -5.62 dBm Receiver signal average optical power : 0.2014 mW / -6.96 dBm Reported-by: chris.healy@zii.aero Signed-off-by: Andrew Lunn <andrew@lunn.ch> Fixes: 1323061a018a ("net: phy: sfp: Add HWMON support for module sensors") Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-12net: phy: make exported variables non-staticDenis Efremov
The variables phy_basic_ports_array, phy_fibre_port_array and phy_all_ports_features_array are declared static and marked EXPORT_SYMBOL_GPL(), which is at best an odd combination. Because the variables were decided to be a part of API, this commit removes the static attributes and adds the declarations to the header. Fixes: 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08net: phy: Make use of linkmode_mod_bit helperFuqian Huang
linkmode_mod_bit is introduced as a helper function to set/clear bits in a linkmode. Replace the if else code structure with a call to the helper linkmode_mod_bit. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15Revert "net: phylink: set the autoneg state in phylink_phy_change"David S. Miller
This reverts commit ef7bfa84725d891bbdb88707ed55b2cbf94942bb. Russell King espressed some strong opposition to this change, explaining that this is trying to make phylink behave outside of how it has been designed. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15net: phylink: set the autoneg state in phylink_phy_changeIoana Ciornei
The phy_state field of phylink should carry only valid information especially when this can be passed to the .mac_config callback. Update the an_enabled field with the autoneg state in the phylink_phy_change function. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: phy: sfp: clean up a conditionDan Carpenter
The acpi_node_get_property_reference() doesn't return ACPI error codes, it just returns regular negative kernel error codes. This patch doesn't affect run time, it's just a clean up. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Ruslan Babayev <ruslan@babayev.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: phy: Add more 1000BaseX support detectionRobert Hancock
Commit "net: phy: Add detection of 1000BaseX link mode support" added support for not filtering out 1000BaseX mode from the PHY's supported modes in genphy_config_init, but we have to make a similar change in genphy_read_abilities in order to actually detect it as a supported mode in the first place. Add this in. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-09net: phy: broadcom: Add genphy_suspend and genphy_resume for BCM5464Vladimir Oltean
This puts the quad PHY ports in power-down mode when the PHY transitions to the PHY_HALTED state. It is likely that all the other PHYs support the BMCR_PDOWN bit, but I only have the BCM5464R to test. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-09net: sfp: add mutex to prevent concurrent state checksRobert Hancock
sfp_check_state can potentially be called by both a threaded IRQ handler and delayed work. If it is concurrently called, it could result in incorrect state management. Add a st_mutex to protect the state - this lock gets taken outside of code that checks and handle state changes, and the existing sm_mutex nests inside of it. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-09net: sfp: Stop SFP polling and interrupt handling during shutdownRobert Hancock
SFP device polling can cause problems during the shutdown process if the parent devices of the network controller have been shut down already. This problem was seen on the iMX6 platform with PCIe devices, where accessing the device after the bus is shut down causes a hang. Free any acquired GPIO interrupts and stop all delayed work in the SFP driver during the shutdown process, so that we ensure that no pending operations are still occurring after the SFP shutdown completes. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-09net: phy: rename Asix Electronics PHY driverMichael Schmitz
[Resent to net instead of net-next - may clash with Anders Roxell's patch series addressing duplicate module names] Commit 31dd83b96641 ("net-next: phy: new Asix Electronics PHY driver") introduced a new PHY driver drivers/net/phy/asix.c that causes a module name conflict with a pre-existiting driver (drivers/net/usb/asix.c). The PHY driver is used by the X-Surf 100 ethernet card driver, and loaded by that driver via its PHY ID. A rename of the driver looks unproblematic. Rename PHY driver to ax88796b.c in order to resolve name conflict. Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Fixes: 31dd83b96641 ("net-next: phy: new Asix Electronics PHY driver") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-06net: phy: Add detection of 1000BaseX link mode supportRobert Hancock
Add 1000BaseX to the link modes which are detected based on the MII_ESTATUS register as per 802.3 Clause 22. This allows PHYs which support 1000BaseX to work properly with drivers using phylink. Previously 1000BaseX support was not detected, and if that was the only mode the PHY indicated support for, phylink would refuse to attach it due to the list of supported modes being empty. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05net: phy: remove state PHY_FORCINGHeiner Kallweit
In the early days of phylib we had a functionality that changed to the next lower speed in fixed mode if no link was established after a certain period of time. This functionality has been removed years ago, and state PHY_FORCING isn't needed any longer. Instead we can go from UP to RUNNING or NOLINK directly (same as in autoneg mode). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-04net: phylink: avoid reducing support maskRussell King
Avoid reducing the support mask as a result of the interface type selected for SFP modules, or when setting the link settings through ethtool - this should only change when the supported link modes of the hardware combination change. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-03net: sfp: read eeprom in maximum 16 byte incrementsRussell King
Some SFP modules do not like reads longer than 16 bytes, so read the EEPROM in chunks of 16 bytes at a time. This behaviour is not specified in the SFP MSAs, which specifies: "The serial interface uses the 2-wire serial CMOS E2PROM protocol defined for the ATMEL AT24C01A/02/04 family of components." and "As long as the SFP+ receives an acknowledge, it shall serially clock out sequential data words. The sequence is terminated when the host responds with a NACK and a STOP instead of an acknowledge." We must avoid breaking a read across a 16-bit quantity in the diagnostic page, thankfully all 16-bit quantities in that page are naturally aligned. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-31net: sfp: remove sfp-bus use of netdevsRussell King
The sfp-bus code now no longer has any use for the network device structure, so remove its use. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-31net: sfp: add mandatory attach/detach methods for sfp busesRussell King
Add attach and detach methods for SFP buses, which will allow us to get rid of the netdev storage in sfp-bus. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-31net: phy: allow Clause 45 access via mii ioctlRussell King
Allow userspace to generate Clause 45 MII access cycles via phylib. This is useful for tools such as mii-diag to be able to inspect Clause 45 PHYs. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-31net: phylink: support for link gpio interruptRussell King
Add support for using GPIO interrupts with a fixed-link GPIO rather than polling the GPIO every second and invoking the phylink resolution. This avoids unnecessary calls to mac_config(). Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-31net: phylink: remove netdev from phylink mii ioctl emulationRussell King
The netdev used in the phylink ioctl emulation is never used, so let's remove it. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The phylink conflict was between a bug fix by Russell King to make sure we have a consistent PHY interface mode, and a change in net-next to pull some code in phylink_resolve() into the helper functions phylink_mac_link_{up,down}() On the dp83867 side it's mostly overlapping changes, with the 'net' side removing a condition that was supposed to trigger for RGMII but because of how it was coded never actually could trigger. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30net: phy: export phy_queue_state_machineHeiner Kallweit
We face the issue that link change interrupt and link status may be reported by different PHY layers. As a result the link change interrupt may occur before the link status changes. Export phy_queue_state_machine to allow PHY drivers to specify a delay between link status change interrupt and link status check. v2: - change jiffies parameter type to unsigned long Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30net: phy: add callback for custom interrupt handler to struct phy_driverHeiner Kallweit
The phylib interrupt handler handles link change events only currently. However PHY drivers may want to use other interrupt sources too, e.g. to report temperature monitoring events. Therefore add a callback to struct phy_driver allowing PHY drivers to implement a custom interrupt handler. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Suggested-by: Russell King - ARM Linux admin <linux@armlinux.org.uk> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30net: phy: enable interrupts when PHY is attached alreadyHeiner Kallweit
This patch is a step towards allowing PHY drivers to handle more interrupt sources than just link change. E.g. several PHY's have built-in temperature monitoring and can raise an interrupt if a temperature threshold is exceeded. We may be interested in such interrupts also if the phylib state machine isn't started. Therefore move enabling interrupts to phy_request_interrupt(). v2: - patch added to series Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30net: phy: sfp: enable i2c-bus detection on ACPI based systemsRuslan Babayev
Lookup I2C adapter using the "i2c-bus" device property on ACPI based systems similar to how it's done with DT. An example DSD describing an SFP on an ACPI based system: Device (SFP0) { Name (_HID, "PRP0001") Name (_CRS, ResourceTemplate() { GpioIo(Exclusive, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.PCI0.RP01.GPIO", 0, ResourceConsumer) { 0, 1, 2, 3, 4 } }) Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "compatible", "sff,sfp" }, Package () { "i2c-bus", \_SB.PCI0.RP01.I2C.MUX.CH0 }, Package () { "maximum-power-milliwatt", 1000 }, Package () { "tx-disable-gpios", Package () { ^SFP0, 0, 0, 1} }, Package () { "reset-gpio", Package () { ^SFP0, 0, 1, 1} }, Package () { "mod-def0-gpios", Package () { ^SFP0, 0, 2, 1} }, Package () { "tx-fault-gpios", Package () { ^SFP0, 0, 3, 0} }, Package () { "los-gpios", Package () { ^SFP0, 0, 4, 1} }, }, }) } Device (PHY0) { Name (_HID, "PRP0001") Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "compatible", "ethernet-phy-ieee802.3-c45" }, Package () { "sfp", \_SB.PCI0.RP01.SFP0 }, Package () { "managed", "in-band-status" }, Package () { "phy-mode", "sgmii" }, }, }) } Signed-off-by: Ruslan Babayev <ruslan@babayev.com> Cc: xe-linux-external@cisco.com Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29net: phy: tja11xx: Switch to HWMON_CHANNEL_INFO()Marek Vasut
The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: linux-hwmon@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29net: phylink: Add phylink_{printk, err, warn, info, dbg} macrosIoana Ciornei
With the latest addition to the PHYLINK infrastructure, we are faced with a decision on when to print necessary info using the struct net_device and when with the struct device. Add a series of macros that encapsulate this decision and replace all uses of netdev_err&co with phylink_err. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 01:17:29 +0000