summaryrefslogtreecommitdiff
path: root/drivers/net/phy
AgeCommit message (Collapse)Author
2022-12-08net: phy: remove redundant "depends on" linesRandy Dunlap
Delete a few lines of "depends on PHYLIB" since they are inside an "if PHYLIB / endif # PHYLIB" block, i.e., they are redundant and the other 50+ drivers there don't use "depends on PHYLIB" since it is not needed. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Link: https://lore.kernel.org/r/20221207044257.30036-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-07net: phy: mxl-gpy: add MDINT workaroundMichael Walle
At least the GPY215B and GPY215C has a bug where it is still driving the interrupt line (MDINT) even after the interrupt status register is read and its bits are cleared. This will cause an interrupt storm. Although the MDINT is multiplexed with a GPIO pin and theoretically we could switch the pinmux to GPIO input mode, this isn't possible because the access to this register will stall exactly as long as the interrupt line is asserted. We exploit this very fact and just read a random internal register in our interrupt handler. This way, it will be delayed until the external interrupt line is released and an interrupt storm is avoided. The internal register access via the mailbox was deduced by looking at the downstream PHY API because the datasheet doesn't mention any of this. Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221205200453.3447866-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-06net: sfp: clean up i2c-bus property parsingRussell King (Oracle)
We currently have some complicated code in sfp_probe() which gets the I2C bus depending on whether the sfp node is DT or ACPI, and we use completely separate lookup functions. This could do with being in a separate function to make the code more readable, so move it to a new function, sfp_i2c_get(). We can also use fwnode_find_reference() to lookup the I2C bus fwnode before then decending into fwnode-type specific parsing. A future cleanup would be to move the fwnode-type specific parsing into the i2c layer, which is where it really should be. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1p1WGJ-0098wS-4w@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-06net: mdio: fix unbalanced fwnode reference count in mdio_device_release()Zeng Heng
There is warning report about of_node refcount leak while probing mdio device: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/soc@0/mdio@710700c0/ethernet@4 In of_mdiobus_register_device(), we increase fwnode refcount by fwnode_handle_get() before associating the of_node with mdio device, but it has never been decreased in normal path. Since that, in mdio_device_release(), it needs to call fwnode_handle_put() in addition instead of calling kfree() directly. After above, just calling mdio_device_free() in the error handle path of of_mdiobus_register_device() is enough to keep the refcount balanced. Fixes: a9049e0c513c ("mdio: Add support for mdio drivers.") Signed-off-by: Zeng Heng <zengheng4@huawei.com> Reviewed-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20221203073441.3885317-1-zengheng4@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-05net: phy: mxl-gpy: rename MMD_VEND1 macros to match datasheetMichael Walle
Rename the temperature sensors macros to match the names in the datasheet. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-30net: phy: Add link between phy dev and mac devXiaolei Wang
If the external phy used by current mac interface is managed by another mac interface, it means that this network port cannot work independently, especially when the system suspends and resumes, the following trace may appear, so we should create a device link between phy dev and mac dev. WARNING: CPU: 0 PID: 24 at drivers/net/phy/phy.c:983 phy_error+0x20/0x68 Modules linked in: CPU: 0 PID: 24 Comm: kworker/0:2 Not tainted 6.1.0-rc3-00011-g5aaef24b5c6d-dirty #34 Hardware name: Freescale i.MX6 SoloX (Device Tree) Workqueue: events_power_efficient phy_state_machine unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x68/0x90 dump_stack_lvl from __warn+0xb4/0x24c __warn from warn_slowpath_fmt+0x5c/0xd8 warn_slowpath_fmt from phy_error+0x20/0x68 phy_error from phy_state_machine+0x22c/0x23c phy_state_machine from process_one_work+0x288/0x744 process_one_work from worker_thread+0x3c/0x500 worker_thread from kthread+0xf0/0x114 kthread from ret_from_fork+0x14/0x28 Exception stack(0xf0951fb0 to 0xf0951ff8) Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221130021216.1052230-1-xiaolei.wang@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-28net: mdiobus: fix unbalanced node reference countYang Yingliang
I got the following report while doing device(mscc-miim) load test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/soc@0/mdio@7107009c/ethernet-phy@0 If the 'fwnode' is not an acpi node, the refcount is get in fwnode_mdiobus_phy_device_register(), but it has never been put when the device is freed in the normal path. So call fwnode_handle_put() in phy_device_release() to avoid leak. If it's an acpi node, it has never been get, but it's put in the error path, so call fwnode_handle_get() before phy_device_register() to keep get/put operation balanced. Fixes: bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221124150130.609420-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-28net: phylink: fix PHY validation with rate adaptionRussell King (Oracle)
Tim Harvey reports that link modes which he does not expect to be supported are being advertised, and this is because of the workaround we have for PHYs that switch interface modes. Fix this up by checking whether rate matching will be used for the requested interface mode, and if rate matching will be used, perform validation only with the requested interface mode, rather than invoking this workaround. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-27net: phy: fix null-ptr-deref while probe() failedYang Yingliang
I got a null-ptr-deref report as following when doing fault injection test: BUG: kernel NULL pointer dereference, address: 0000000000000058 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G B N 6.1.0-rc3+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:klist_put+0x2d/0xd0 Call Trace: <TASK> klist_remove+0xf1/0x1c0 device_release_driver_internal+0x23e/0x2d0 bus_remove_device+0x1bd/0x240 device_del+0x357/0x770 phy_device_remove+0x11/0x30 mdiobus_unregister+0xa5/0x140 release_nodes+0x6a/0xa0 devres_release_all+0xf8/0x150 device_unbind_cleanup+0x19/0xd0 //probe path: phy_device_register() device_add() phy_connect phy_attach_direct() //set device driver probe() //it's failed, driver is not bound device_bind_driver() // probe failed, it's not called //remove path: phy_device_remove() device_del() device_release_driver_internal() __device_release_driver() //dev->drv is not NULL klist_remove() <- knode_driver is not added yet, cause null-ptr-deref In phy_attach_direct(), after setting the 'dev->driver', probe() fails, device_bind_driver() is not called, so the knode_driver->n_klist is not set, then it causes null-ptr-deref in __device_release_driver() while deleting device. Fix this by setting dev->driver to NULL in the error path in phy_attach_direct(). Fixes: e13934563db0 ("[PATCH] PHY Layer fixup") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-25net: phy: add Motorcomm YT8531S phy id.Frank
We added patch for motorcomm.c to support YT8531S. This patch has been tested on AM335x platform which has one YT8531S interface card and passed all test cases. The tested cases indluding: YT8531S UTP function with support of 10M/100M/1000M; YT8531S Fiber function with support of 100M/1000M; and YT8531S Combo function that supports auto detection of media type. Since most functions of YT8531S are similar to YT8521 and we reuse some codes for YT8521 in the patch file. Signed-off-by: Frank <Frank.Sae@motor-comm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21net: phy: at803x: fix error return code in at803x_probe()Wei Yongjun
Fix to return a negative error code from the ccr read error handling case instead of 0, as done elsewhere in this function. Fixes: 3265f4218878 ("net: phy: at803x: add fiber support") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221118103635.254256-1-weiyongjun@huaweicloud.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net: phy: mscc: macsec: do not copy encryption keysAntoine Tenart
Following 1b16b3fdf675 ("net: phy: mscc: macsec: clear encryption keys when freeing a flow"), go one step further and instead of calling memzero_explicit on the key when freeing a flow, simply not copy the key in the first place as it's only used when a new flow is set up. Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/linux/bpf.h 1f6e04a1c7b8 ("bpf: Fix offset calculation error in __copy_map_value and zero_map_value") aa3496accc41 ("bpf: Refactor kptr_off_tab into btf_record") f71b2f64177a ("bpf: Refactor map->off_arr handling") https://lore.kernel.org/all/20221114095000.67a73239@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18treewide: use get_random_u32_below() instead of deprecated functionJason A. Donenfeld
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-15net: phy: aquantia: add AQR112 and AQR412 PHY IDsVladimir Oltean
These are Gen3 Aquantia N-BASET PHYs which support 5GBASE-T, 2.5GBASE-T, 1000BASE-T and 100BASE-TX (not 10G); also EEE, Sync-E, PTP, PoE. The 112 is a single PHY package, the 412 is a quad PHY package. The system-side SERDES interface of these PHYs selects its protocol depending on the negotiated media side link speed. That protocol can be 1000BASE-X, 2500BASE-X, 10GBASE-R, SGMII, USXGMII. The configuration of which SERDES protocol to use for which link speed is made by firmware; even though it could be overwritten over MDIO by Linux, we assume that the firmware provisioning is ok for the board on which the driver probes. For cases when the system side runs at a fixed rate, we want phylib/phylink to detect the PAUSE rate matching ability of these PHYs, so we need to use the Aquantia rather than the generic C45 driver. This needs aqr107_read_status() -> aqr107_read_rate() to set phydev->rate_matching, as well as the aqr107_get_rate_matching() method. I am a bit unsure about the naming convention in the driver. Since AQR107 is a Gen2 PHY, I assume all functions prefixed with "aqr107_" rather than "aqr_" mean Gen2+ features. So I've reused this naming convention. I've tested PHY "SGMII" statistics as well as the .link_change_notify method, which prints: Aquantia AQR412 mdio_mux-0.4:00: Link partner is Aquantia PHY, FW 4.3, fast-retrain downshift advertised, fast reframe advertised Tested SERDES protocols are usxgmii and 2500base-x (the latter with PAUSE rate matching). Tested link modes are 100/1000/2500 Base-T (with Aquantia link partner and with other link partners). No notable events observed. The placement of these PHY IDs in the driver is right before AQR113C, a Gen4 PHY. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-15net: phy: marvell: add sleep time after enabling the loopback bitAminuddin Jamaluddin
Sleep time is added to ensure the phy to be ready after loopback bit was set. This to prevent the phy loopback test from failing. Fixes: 020a45aff119 ("net: phy: marvell: add Marvell specific PHY loopback") Cc: <stable@vger.kernel.org> # 5.15.x Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Aminuddin Jamaluddin <aminuddin.jamaluddin@intel.com> Link: https://lore.kernel.org/r/20221114065302.10625-1-aminuddin.jamaluddin@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-11net: phy: dp83867: Fix SGMII FIFO depth for non OF devicesMichael Sit Wei Hong
Current driver code will read device tree node information, and set default values if there is no info provided. This is not done in non-OF devices leading to SGMII fifo depths being set to the smallest size. This patch sets the value to the default value of the PHY as stated in the PHY datasheet. Fixes: 4dc08dcc9f6f ("net: phy: dp83867: introduce critical chip default init for non-of platform") Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221110054938.925347-1-michael.wei.hong.sit@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/can/pch_can.c ae64438be192 ("can: dev: fix skb drop check") 1dd1b521be85 ("can: remove obsolete PCH CAN driver") https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-10net: phy: mscc: macsec: clear encryption keys when freeing a flowAntoine Tenart
Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after setting up offload") made sure to clean encryption keys from the stack after setting up offloading, but the MSCC PHY driver made a copy, kept it in the flow data and did not clear it when freeing a flow. Fix this. Fixes: 28c5107aa904 ("net: phy: mscc: macsec support") Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-09net: phy: dp83867: add TI PHY loopbackTan Tee Min
The existing genphy_loopback() is not working for TI DP83867 PHY as it will disable autoneg support while another side is still enabling autoneg. This is causing the link is not established and results in timeout error in genphy_loopback() function. Thus, based on TI PHY datasheet, introduce a TI PHY loopback function by just configuring BMCR_LOOPBACK(Bit-9) in MII_BMCR register (0x0). Tested working on TI DP83867 PHY for all speeds (10/100/1000Mbps). Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221108101527.612723-1-michael.wei.hong.sit@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-08ethtool: linkstate: add a statistic for PHY down eventsJakub Kicinski
The previous attempt to augment carrier_down (see Link) was not met with much enthusiasm so let's do the simple thing of exposing what some devices already maintain. Add a common ethtool statistic for link going down. Currently users have to maintain per-driver mapping to extract the right stat from the vendor-specific ethtool -S stats. carrier_down does not fit the bill because it counts a lot of software related false positives. Add the statistic to the extended link state API to steer vendors towards implementing all of it. Implement for bnxt and all Linux-controlled PHYs. mlx5 and (possibly) enic also have a counter for this but I leave the implementation to their maintainers. Link: https://lore.kernel.org/r/20220520004500.2250674-1-kuba@kernel.org Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20221104190125.684910-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-07net: remove explicit phylink_generic_validate() referencesRussell King (Oracle)
Virtually all conventional network drivers are now converted to use phylink_generic_validate() - only DSA drivers and fman_memac remain, so lets remove the necessity for network drivers to explicitly set this member, and default to phylink_generic_validate() when unset. This is possible as .validate must currently be set. Any remaining instances that have not been addressed by this patch can be fixed up later. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/E1or0FZ-001tRa-DI@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-07net: phy: fix yt8521 duplicated argument to & or |Frank
cocci warnings: (new ones prefixed by >>) >> drivers/net/phy/motorcomm.c:1122:8-35: duplicated argument to & or | drivers/net/phy/motorcomm.c:1126:8-35: duplicated argument to & or | drivers/net/phy/motorcomm.c:1130:8-34: duplicated argument to & or | drivers/net/phy/motorcomm.c:1134:8-34: duplicated argument to & or | The second YT8521_RC1R_GE_TX_DELAY_xx should be YT8521_RC1R_FE_TX_DELAY_xx. Fixes: 70479a40954c ("net: phy: Add driver for Motorcomm yt8521 gigabit ethernet phy") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Frank <Frank.Sae@motor-comm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-02net: mdio: fix undefined behavior in bit shift for __mdiobus_registerGaosheng Cui
Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c __mdiobus_register+0x49d/0x4e0 fixed_mdio_bus_init+0xd8/0x12d do_one_initcall+0x76/0x430 kernel_init_freeable+0x3b3/0x422 kernel_init+0x24/0x1e0 ret_from_fork+0x1f/0x30 </TASK> Fixes: 4fd5f812c23c ("phylib: allow incremental scanning of an mii bus") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221031132645.168421-1-cuigaosheng1@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-31net: phy: Add driver for Motorcomm yt8521 gigabit ethernet phyFrank
Add a driver for the motorcomm yt8521 gigabit ethernet phy. We have verified the driver on StarFive VisionFive development board, which is developed by Shanghai StarFive Technology Co., Ltd.. On the board, yt8521 gigabit ethernet phy works in utp mode, RGMII interface, supports 1000M/100M/10M speeds, and wol(magic package). Signed-off-by: Frank <Frank.Sae@motor-comm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-28net: phy: mxl-gpy: Add PHY Auto/MDI/MDI-X set driver for GPY211 chipsRaju Lakkaraju
Add support for MDI-X status and configuration for GPY211 chips Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-28net: phy: mxl-gpy: Change gpy_update_interface() function return typeRaju Lakkaraju
gpy_update_interface() is called from gpy_read_status() which does return error codes. gpy_read_status() would benefit from returning -EINVAL, etc. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-27net: dp83822: Print the SOR1 strap statusFabio Estevam
During the bring-up of the Ethernet PHY, it is very useful to see the bootstrap status information, as it can help identifying hardware bootstrap mistakes. Allow printing the SOR1 register, which contains the strap status to ease the bring-up. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221025120109.779337-1-festevam@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-26phylink: require valid state argument to phylink_validate_mask_caps()Jakub Kicinski
state is deferenced earlier in the function, the NULL check is pointless. Since we don't have any crash reports presumably it's safe to assume state is not NULL. Fixes: f392a1846489 ("net: phylink: provide phylink_validate_mask_caps() helper") Reviewed-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20221025185126.1720553-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-25net: phy: micrel: Add PHY Auto/MDI/MDI-X set driver for KSZ9131Raju Lakkaraju
Add support for MDI-X status and configuration for KSZ9131 chips Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24net: sfp: get rid of DM7052 hack when enabling high powerRussell King (Oracle)
Since we no longer mis-detect high-power mode with the DM7052 module, we no longer need the hack in sfp_module_enable_high_power(), and can now switch this to use sfp_modify_u8(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24net: sfp: add sfp_modify_u8() helperRussell King (Oracle)
Add a helper to modify bits in a single byte in memory space, and use it when updating the soft tx-disable flag in the module. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24net: sfp: provide a definition for the power level select bitRussell King (Oracle)
Provide a named definition for the power level select bit in the extended status register, rather than using BIT(0) in the code. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24net: sfp: ignore power level 3 prior to SFF-8472 Rev 11.4Russell King (Oracle)
Power level 3 was included in SFF-8472 revision 11.9, but this does not have a compliance code. Use revision 11.4 as the minimum compliance level instead. This should avoid any spurious indication of 2W modules. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24net: sfp: ignore power level 2 prior to SFF-8472 Rev 10.2Russell King (Oracle)
Power level 2 was introduced by SFF-8472 revision 10.2. Ignore the power declaration bit for modules that are not compliant with at least this revision. This should remove any spurious indication of 1.5W modules. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24net: sfp: check firmware provided max powerRussell King (Oracle)
Check that the firmware provided maximum power is at least 1W, which is the minimum power level for any SFP module. Now that we enforce the minimum of 1W, we can exit early from sfp_module_parse_power() if the module power is 1W or less. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24ethtool: Add support for 800Gbps link modesAmit Cohen
Add support for 800Gbps speed, link modes of 100Gbps per lane. As mentioned in slide 21 in IEEE documentation [1], all adopted 802.3df copper and optical PMDs baselines using 100G/lane will be supported. Add the relevant PMDs which are mentioned in slide 5 in IEEE documentation [1] and were approved on 10-2022 [2]: BP - KR8 Cu Cable - CR8 MMF 50m - VR8 MMF 100m - SR8 SMF 500m - DR8 SMF 2km - DR8-2 [1]: https://www.ieee802.org/3/df/public/22_10/22_1004/shrikhande_3df_01a_221004.pdf [2]: https://ieee802.org/3/df/KeyMotions_3df_221005.pdf Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-20Merge tag 'net-6.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter. Current release - regressions: - revert "net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}" - revert "net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()" - dsa: uninitialized variable in dsa_slave_netdevice_event() - eth: sunhme: uninitialized variable in happy_meal_init() Current release - new code bugs: - eth: octeontx2: fix resource not freed after malloc Previous releases - regressions: - sched: fix return value of qdisc ingress handling on success - sched: fix race condition in qdisc_graft() - udp: update reuse->has_conns under reuseport_lock. - tls: strp: make sure the TCP skbs do not have overlapping data - hsr: avoid possible NULL deref in skb_clone() - tipc: fix an information leak in tipc_topsrv_kern_subscr - phylink: add mac_managed_pm in phylink_config structure - eth: i40e: fix DMA mappings leak - eth: hyperv: fix a RX-path warning - eth: mtk: fix memory leaks Previous releases - always broken: - sched: cake: fix null pointer access issue when cake_init() fails" * tag 'net-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits) net: phy: dp83822: disable MDI crossover status change interrupt net: sched: fix race condition in qdisc_graft() net: hns: fix possible memory leak in hnae_ae_register() wwan_hwsim: fix possible memory leak in wwan_hwsim_dev_new() sfc: include vport_id in filter spec hash and equal() genetlink: fix kdoc warnings selftests: add selftest for chaining of tc ingress handling to egress net: Fix return value of qdisc ingress handling on success net: sched: sfb: fix null pointer access issue when sfb_init() fails Revert "net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()" net: sched: cake: fix null pointer access issue when cake_init() fails ethernet: marvell: octeontx2 Fix resource not freed after malloc netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces. ionic: catch NULL pointer issue on reconfig net: hsr: avoid possible NULL deref in skb_clone() bnxt_en: fix memory leak in bnxt_nvm_test() ip6mr: fix UAF issue in ip6mr_sk_done() when addrconf_init_net() failed udp: Update reuse->has_conns under reuseport_lock. net: ethernet: mediatek: ppe: Remove the unused function mtk_foe_entry_usable() ...
2022-10-19net: phy: dp83822: disable MDI crossover status change interruptFelix Riemann
If the cable is disconnected the PHY seems to toggle between MDI and MDI-X modes. With the MDI crossover status interrupt active this causes roughly 10 interrupts per second. As the crossover status isn't checked by the driver, the interrupt can be disabled to reduce the interrupt load. Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission") Signed-off-by: Felix Riemann <felix.riemann@sma.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221018104755.30025-1-svc.sw.rte.linux@sma.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-19net: phylink: provide phylink_validate_mask_caps() helperRussell King (Oracle)
Provide a helper that restricts the link modes according to the phylink capabilities. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [rebased on net-next/master and added documentation] Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-16Merge tag 'random-6.1-rc1-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1
2022-10-15net: phylink: add mac_managed_pm in phylink_config structureShenwei Wang
The recent commit 'commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")' requires the MAC driver explicitly tell the phy driver who is managing the PM, otherwise you will see warning during resume stage. Add a boolean property in the phylink_config structure so that the MAC driver can use it to tell the PHY driver if it wants to manage the PM. Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-15net: phy: dp83867: Extend RX strap quirk for SGMII modeHarini Katakam
When RX strap in HW is not set to MODE 3 or 4, bit 7 and 8 in CF4 register should be set. The former is already handled in dp83867_config_init; add the latter in SGMII specific initialization. Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Signed-off-by: Harini Katakam <harini.katakam@amd.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-12net: phy: micrel: Fixes FIELD_GET assertionDivya Koppera
FIELD_GET() must only be used with a mask that is a compile-time constant. Mark the functions as __always_inline to avoid the problem. Fixes: 21b688dabecb6a ("net: phy: micrel: Cable Diag feature for lan8814 phy") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com> Link: https://lore.kernel.org/r/20221011095437.12580-1-Divya.Koppera@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-10net: sfp: fill also 5gbase-r and 25gbase-r modes in sfp_parse_support()Marek Behún
Fill in also 5gbase-r and 25gbase-r PHY interface modes into the phy_interface_t bitmap in sfp_parse_support(). Fixes: fd580c983031 ("net: sfp: augment SFP parsing with phy_interface_t bitmap") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20221007084844.20352-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 13:07:34 +0000