Age | Commit message (Collapse) | Author |
|
[ Upstream commit 2560db6ede1aaf162a73b2df43e0b6c5ed8819f7 ]
The call of of_get_child_by_name() will cause refcount incremented
for leds, if it succeeds, it should call of_node_put() to decrease
it, fix it.
Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240830022025.610844-1-ruanjinjie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 61c81872815f46006982bb80460c0c80a949b35b ]
If phydev->irq is set unconditionally, check
for valid interrupt handler or fall back to polling mode to prevent
nullptr exceptions in interrupt service routine.
Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240129135734.18975-2-andre.werner@systec-electronic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 32fa4366cc4da1c97b725a0066adf43c6b298f37 ]
read_poll_timeout inside phy_read_poll_timeout can set val negative
in some cases (for example, __mdiobus_read inside phy_read can return
-EOPNOTSUPP).
Supposedly, commit 4ec732951702 ("net: phylib: fix phy_read*_poll_timeout()")
should fix problems with wrong-signed vals, but I do not see how
as val is sent to phy_read as is and __val = phy_read (not val)
is checked for sign.
Change val type for signed to allow better error handling as done in other
phy_read_poll_timeout callers. This will not fix any error handling
by itself, but allows, for example, to modify cond with appropriate
sign check or check resulting val separately.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 014068dcb5b1 ("net: phy: genphy_loopback: add link speed configuration")
Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240315175052.8049-1-kiryushin@ancud.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4469c0c5b14a0919f5965c7ceac96b523eb57b79 ]
The phy_get_internal_delay function could try to access to an empty
array in the case that the driver is calling phy_get_internal_delay
without defining delay_values and rx-internal-delay-ps or
tx-internal-delay-ps is defined to 0 in the device-tree.
This will lead to "unable to handle kernel NULL pointer dereference at
virtual address 0". To avoid this kernel oops, the test should be delay
>= 0. As there is already delay < 0 test just before, the test could
only be size == 0.
Fixes: 92252eec913b ("net: phy: Add a helper to return the index for of the internal delay")
Co-developed-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Signed-off-by: Kévin L'hôpital <kevin.lhopital@savoirfairelinux.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b1dfc0f76231bbf395c59d20a2070684620d5d0f ]
Calling led_trigger_register() when attaching a PHY located on an SFP
module potentially (and practically) leads into a deadlock.
Fix this by not calling led_trigger_register() for PHYs localted on SFP
modules as such modules actually never got any LEDs.
======================================================
WARNING: possible circular locking dependency detected
6.7.0-rc4-next-20231208+ #0 Tainted: G O
------------------------------------------------------
kworker/u8:2/43 is trying to acquire lock:
ffffffc08108c4e8 (triggers_list_lock){++++}-{3:3}, at: led_trigger_register+0x4c/0x1a8
but task is already holding lock:
ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&sfp->sm_mutex){+.+.}-{3:3}:
__mutex_lock+0x88/0x7a0
mutex_lock_nested+0x20/0x28
cleanup_module+0x2ae0/0x3120 [sfp]
sfp_register_bus+0x5c/0x9c
sfp_register_socket+0x48/0xd4
cleanup_module+0x271c/0x3120 [sfp]
platform_probe+0x64/0xb8
really_probe+0x17c/0x3c0
__driver_probe_device+0x78/0x164
driver_probe_device+0x3c/0xd4
__driver_attach+0xec/0x1f0
bus_for_each_dev+0x60/0xa0
driver_attach+0x20/0x28
bus_add_driver+0x108/0x208
driver_register+0x5c/0x118
__platform_driver_register+0x24/0x2c
init_module+0x28/0xa7c [sfp]
do_one_initcall+0x70/0x2ec
do_init_module+0x54/0x1e4
load_module+0x1b78/0x1c8c
__do_sys_init_module+0x1bc/0x2cc
__arm64_sys_init_module+0x18/0x20
invoke_syscall.constprop.0+0x4c/0xdc
do_el0_svc+0x3c/0xbc
el0_svc+0x34/0x80
el0t_64_sync_handler+0xf8/0x124
el0t_64_sync+0x150/0x154
-> #2 (rtnl_mutex){+.+.}-{3:3}:
__mutex_lock+0x88/0x7a0
mutex_lock_nested+0x20/0x28
rtnl_lock+0x18/0x20
set_device_name+0x30/0x130
netdev_trig_activate+0x13c/0x1ac
led_trigger_set+0x118/0x234
led_trigger_write+0x104/0x17c
sysfs_kf_bin_write+0x64/0x80
kernfs_fop_write_iter+0x128/0x1b4
vfs_write+0x178/0x2a4
ksys_write+0x58/0xd4
__arm64_sys_write+0x18/0x20
invoke_syscall.constprop.0+0x4c/0xdc
do_el0_svc+0x3c/0xbc
el0_svc+0x34/0x80
el0t_64_sync_handler+0xf8/0x124
el0t_64_sync+0x150/0x154
-> #1 (&led_cdev->trigger_lock){++++}-{3:3}:
down_write+0x4c/0x13c
led_trigger_write+0xf8/0x17c
sysfs_kf_bin_write+0x64/0x80
kernfs_fop_write_iter+0x128/0x1b4
vfs_write+0x178/0x2a4
ksys_write+0x58/0xd4
__arm64_sys_write+0x18/0x20
invoke_syscall.constprop.0+0x4c/0xdc
do_el0_svc+0x3c/0xbc
el0_svc+0x34/0x80
el0t_64_sync_handler+0xf8/0x124
el0t_64_sync+0x150/0x154
-> #0 (triggers_list_lock){++++}-{3:3}:
__lock_acquire+0x12a0/0x2014
lock_acquire+0x100/0x2ac
down_write+0x4c/0x13c
led_trigger_register+0x4c/0x1a8
phy_led_triggers_register+0x9c/0x214
phy_attach_direct+0x154/0x36c
phylink_attach_phy+0x30/0x60
phylink_sfp_connect_phy+0x140/0x510
sfp_add_phy+0x34/0x50
init_module+0x15c/0xa7c [sfp]
cleanup_module+0x1d94/0x3120 [sfp]
cleanup_module+0x2bb4/0x3120 [sfp]
process_one_work+0x1f8/0x4ec
worker_thread+0x1e8/0x3d8
kthread+0x104/0x110
ret_from_fork+0x10/0x20
other info that might help us debug this:
Chain exists of:
triggers_list_lock --> rtnl_mutex --> &sfp->sm_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sfp->sm_mutex);
lock(rtnl_mutex);
lock(&sfp->sm_mutex);
lock(triggers_list_lock);
*** DEADLOCK ***
4 locks held by kworker/u8:2/43:
#0: ffffff80c000f938 ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
#1: ffffffc08214bde8 ((work_completion)(&(&sfp->timeout)->work)){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
#2: ffffffc0810902f8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x18/0x20
#3: ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]
stack backtrace:
CPU: 0 PID: 43 Comm: kworker/u8:2 Tainted: G O 6.7.0-rc4-next-20231208+ #0
Hardware name: Bananapi BPI-R4 (DT)
Workqueue: events_power_efficient cleanup_module [sfp]
Call trace:
dump_backtrace+0xa8/0x10c
show_stack+0x14/0x1c
dump_stack_lvl+0x5c/0xa0
dump_stack+0x14/0x1c
print_circular_bug+0x328/0x430
check_noncircular+0x124/0x134
__lock_acquire+0x12a0/0x2014
lock_acquire+0x100/0x2ac
down_write+0x4c/0x13c
led_trigger_register+0x4c/0x1a8
phy_led_triggers_register+0x9c/0x214
phy_attach_direct+0x154/0x36c
phylink_attach_phy+0x30/0x60
phylink_sfp_connect_phy+0x140/0x510
sfp_add_phy+0x34/0x50
init_module+0x15c/0xa7c [sfp]
cleanup_module+0x1d94/0x3120 [sfp]
cleanup_module+0x2bb4/0x3120 [sfp]
process_one_work+0x1f8/0x4ec
worker_thread+0x1e8/0x3d8
kthread+0x104/0x110
ret_from_fork+0x10/0x20
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
Link: https://lore.kernel.org/r/102a9dce38bdf00215735d04cd4704458273ad9c.1702339354.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/sfc/tc.c
fa165e194997 ("sfc: don't unregister flow_indr if it was never registered")
3bf969e88ada ("sfc: add MAE table machinery for conntrack table")
https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Uwe reports:
"Most PHYs signal WoL using an interrupt. So disabling interrupts [at
shutdown] breaks WoL at least on PHYs covered by the marvell driver."
Discussing with Ioana, the problem which was trying to be solved was:
"The board in question is a LS1021ATSN which has two AR8031 PHYs that
share an interrupt line. In case only one of the PHYs is probed and
there are pending interrupts on the PHY#2 an IRQ storm will happen
since there is no entity to clear the interrupt from PHY#2's registers.
PHY#1's driver will get stuck in .handle_interrupt() indefinitely."
Further confirmation that "the two AR8031 PHYs are on the same MDIO
bus."
With WoL using interrupts to wake the system, in such a case, the
system will begin booting with an asserted interrupt. Thus, we need to
cope with an interrupt asserted during boot.
Solve this instead by disabling interrupts during PHY probe. This will
ensure in Ioana's situation that both PHYs of the same type sharing an
interrupt line on a common MDIO bus will have their interrupt outputs
disabled when the driver probes the device, but before we hook in any
interrupt handlers - thus avoiding the interrupt storm.
A better fix would be for platform firmware to disable the interrupting
devices at source during boot, before control is handed to the kernel.
Fixes: e2f016cf7751 ("net: phy: add a shutdown procedure")
Link: 20230804071757.383971-1-u.kleine-koenig@pengutronix.de
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Linux LEDs can be requested to perform hardware accelerated blinking
to indicate link, RX, TX etc. Pass the rules for blinking to the PHY
driver, if it implements the ops needed to determine if a given
pattern can be offloaded, to offload it, and what the current offload
is. Additionally implement the op needed to get what device the LED is
for.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-3-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move marking the PHY as being on a SFP module into the SFP code between
getting the PHY device (and thus initialising the phy_device structure)
and registering the discovered device.
This means that PHY drivers can use phy_on_sfp() in their match and
get_features methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qRaga-001vKt-8X@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net/core/dev_ioctl.c (built-in code) will want to call phy_mii_ioctl()
for hardware timestamping purposes. This is not directly possible,
because phy_mii_ioctl() is a symbol provided under CONFIG_PHYLIB.
Do something similar to what was done in DSA in commit 5a17818682cf
("net: dsa: replace NETDEV_PRE_CHANGE_HWTSTAMP notifier with a stub"),
and arrange some indirect calls to phy_mii_ioctl() through a stub
structure containing function pointers, that's provided by phylib as
built-in even when CONFIG_PHYLIB=m, and which phy_init() populates at
runtime (module insertion).
Note: maybe the ownership of the ethtool_phy_ops singleton is backwards,
and the methods exposed by that should be later merged into phylib_stubs.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-12-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
caller
phy_init() and phy_exit() will have to do more stuff under rtnl_lock()
in a future change. Since rtnl_unlock() -> netdev_run_todo() does a lot
of stuff under the hood, it's a pity to lock and unlock the rtnetlink
mutex twice in a row.
Change the calling convention such that the only caller of
ethtool_set_ethtool_phy_ops(), phy_device.c, provides a context where
the rtnl_mutex is already acquired.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-11-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mdio_bus_init() and phy_driver_register() both have error paths, and if
those are ever hit, ethtool will have a stale pointer to the
phy_ethtool_phy_ops stub structure, which references memory from a
module that failed to load (phylib).
It is probably hard to force an error in this code path even manually,
but the error teardown path of phy_init() should be the same as
phy_exit(), which is now simply not the case.
Fixes: 55d8f053ce1b ("net: phy: Register ethtool PHY operations")
Link: https://lore.kernel.org/netdev/ZLaiJ4G6TaJYGJyU@shell.armlinux.org.uk/
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230720000231.1939689-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
tools/testing/selftests/net/fcnal-test.sh
d7a2fc1437f7 ("selftests: net: fcnal-test: check if FIPS mode is enabled")
dd017c72dde6 ("selftests: fcnal: Test SO_DONTROUTE on TCP sockets.")
https://lore.kernel.org/all/5007b52c-dd16-dbf6-8d64-b9701bfa498b@tessares.net/
https://lore.kernel.org/all/20230619105427.4a0df9b3@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the core is left to remove the LEDs via devm_, it is performed too
late, after the PHY driver is removed from the PHY. This results in
dereferencing a NULL pointer when the LED core tries to turn the LED
off before destroying the LED.
Manually unregister the LEDs at a safe point in phy_remove.
Cc: stable@vger.kernel.org
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are several places which open code comparing PHY IDs. Provide a
couple of helpers to assist with this, using a slightly simpler test
than the original:
- phy_id_compare() compares two arbitary PHY IDs and a mask of the
significant bits in the ID.
- phydev_id_compare() compares the bound phydev with the specified
PHY ID, using the bound driver's mask.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A few PHY drivers are currently attempting to not suspend the PHY when
Wake-on-LAN is enabled, however that code is not currently executing at
all due to an early check in phy_suspend().
This prevents PHY drivers from making an appropriate decisions and put
the hardware into a low power state if desired.
In order to allow the PHY drivers to opt into getting their ->suspend
routine to be called, add a PHY_ALWAYS_CALL_SUSPEND bit which can be
set. A boolean that tracks whether the PHY or the attached MAC has
Wake-on-LAN enabled is also provided for convenience.
If phydev::wol_enabled then the PHY shall not prevent its own
Wake-on-LAN detection logic from working and shall not prevent the
Ethernet MAC from receiving packets for matching.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'reg' is always encoded in 32 bits, thus it has to be read using the
function with the corresponding bit width.
Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230424141648.317944-1-alexander.stein@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The CONFIG_PHYLIB symbol is selected by a number of device drivers that
need PHY support, but it now has a dependency on CONFIG_LEDS_CLASS,
which may not be enabled, causing build failures.
Avoid the risk of missing and circular dependencies by guarding the
phylib LED support itself in another Kconfig symbol that can only be
enabled if the dependency is met.
This could be made a hidden symbol and always enabled when both CONFIG_OF
and CONFIG_LEDS_CLASS are reachable from the phylib, but there may be an
advantage in having users see this option when they have a misconfigured
kernel without built-in LED support.
Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230420084624.3005701-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Linux LEDs can be requested to perform hardware accelerated
blinking. Pass this to the PHY driver, if it implements the op.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Linux LEDs can be software controlled via the brightness file in /sys.
LED drivers need to implement a brightness_set function which the core
will call. Implement an intermediary in phy_device, which will call
into the phy driver if it implements the necessary function.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define common binding parsing for all PHY drivers with LEDs using
phylib. Parse the DT as part of the phy_probe and add LEDs to the
linux LED class infrastructure. For the moment, provide a dummy
brightness function, which will later be replaced with a call into the
PHY driver. This allows testing since the LED core might otherwise
reject an LED whose brightness cannot be set.
Add a dependency on LED_CLASS. It either needs to be built in, or not
enabled, since a modular build can result in linker errors.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Conflicts:
drivers/net/ethernet/mediatek/mtk_ppe.c
3fbe4d8c0e53 ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")
924531326e2d ("net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
fwnode_get_phy_node() does not motify the fwnode structure, so make
the argument const,
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 899a3cbbf77a ("net: phy: remove states PHY_STARTING and
PHY_PENDING") missed to update a comment in phy_probe. Remove
superfluous "Description:" prefix while we are here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20230314124856.44878-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The locking in phy_probe() and phy_remove() does very little to prevent
any races with e.g. phy_attach_direct(), but instead causes lockdep ABBA
warnings. Remove it.
======================================================
WARNING: possible circular locking dependency detected
6.2.0-dirty #1108 Tainted: G W E
------------------------------------------------------
ip/415 is trying to acquire lock:
ffff5c268f81ef50 (&dev->lock){+.+.}-{3:3}, at: phy_attach_direct+0x17c/0x3a0 [libphy]
but task is already holding lock:
ffffaef6496cb518 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x154/0x560
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (rtnl_mutex){+.+.}-{3:3}:
__lock_acquire+0x35c/0x6c0
lock_acquire.part.0+0xcc/0x220
lock_acquire+0x68/0x84
__mutex_lock+0x8c/0x414
mutex_lock_nested+0x34/0x40
rtnl_lock+0x24/0x30
sfp_bus_add_upstream+0x34/0x150
phy_sfp_probe+0x4c/0x94 [libphy]
mv3310_probe+0x148/0x184 [marvell10g]
phy_probe+0x8c/0x200 [libphy]
call_driver_probe+0xbc/0x15c
really_probe+0xc0/0x320
__driver_probe_device+0x84/0x120
driver_probe_device+0x44/0x120
__device_attach_driver+0xc4/0x160
bus_for_each_drv+0x80/0xe0
__device_attach+0xb0/0x1f0
device_initial_probe+0x1c/0x2c
bus_probe_device+0xa4/0xb0
device_add+0x360/0x53c
phy_device_register+0x60/0xa4 [libphy]
fwnode_mdiobus_phy_device_register+0xc0/0x190 [fwnode_mdio]
fwnode_mdiobus_register_phy+0x160/0xd80 [fwnode_mdio]
of_mdiobus_register+0x140/0x340 [of_mdio]
orion_mdio_probe+0x298/0x3c0 [mvmdio]
platform_probe+0x70/0xe0
call_driver_probe+0x34/0x15c
really_probe+0xc0/0x320
__driver_probe_device+0x84/0x120
driver_probe_device+0x44/0x120
__driver_attach+0x104/0x210
bus_for_each_dev+0x78/0xdc
driver_attach+0x2c/0x3c
bus_add_driver+0x184/0x240
driver_register+0x80/0x13c
__platform_driver_register+0x30/0x3c
xt_compat_calc_jump+0x28/0xa4 [x_tables]
do_one_initcall+0x50/0x1b0
do_init_module+0x50/0x1fc
load_module+0x684/0x744
__do_sys_finit_module+0xc4/0x140
__arm64_sys_finit_module+0x28/0x34
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x6c/0x1b0
do_el0_svc+0x34/0x44
el0_svc+0x48/0xf0
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x1a0/0x1a4
-> #0 (&dev->lock){+.+.}-{3:3}:
check_prev_add+0xb4/0xc80
validate_chain+0x414/0x47c
__lock_acquire+0x35c/0x6c0
lock_acquire.part.0+0xcc/0x220
lock_acquire+0x68/0x84
__mutex_lock+0x8c/0x414
mutex_lock_nested+0x34/0x40
phy_attach_direct+0x17c/0x3a0 [libphy]
phylink_fwnode_phy_connect.part.0+0x70/0xe4 [phylink]
phylink_fwnode_phy_connect+0x48/0x60 [phylink]
mvpp2_open+0xec/0x2e0 [mvpp2]
__dev_open+0x104/0x214
__dev_change_flags+0x1d4/0x254
dev_change_flags+0x2c/0x7c
do_setlink+0x254/0xa50
__rtnl_newlink+0x430/0x514
rtnl_newlink+0x58/0x8c
rtnetlink_rcv_msg+0x17c/0x560
netlink_rcv_skb+0x64/0x150
rtnetlink_rcv+0x20/0x30
netlink_unicast+0x1d4/0x2b4
netlink_sendmsg+0x1a4/0x400
____sys_sendmsg+0x228/0x290
___sys_sendmsg+0x88/0xec
__sys_sendmsg+0x70/0xd0
__arm64_sys_sendmsg+0x2c/0x40
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x6c/0x1b0
do_el0_svc+0x34/0x44
el0_svc+0x48/0xf0
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x1a0/0x1a4
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(rtnl_mutex);
lock(&dev->lock);
lock(rtnl_mutex);
lock(&dev->lock);
*** DEADLOCK ***
Fixes: 298e54fa810e ("net: phy: add core phylib sfp support")
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If genphy_c45_read_eee_adv() fails then we need to do a reset and unlock
the &phydev->lock mutex before returning.
Fixes: 3eeca4e199ce ("net: phy: do not force EEE support")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/Y/x/6kHCjnQHqOpF@kili
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With following patches:
commit 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()")
commit 5827b168125d ("net: phy: c45: migrate to genphy_c45_write_eee_adv()")
we set the advertisement to potentially supported values. This behavior
may introduce new regressions on systems where EEE was disabled by
default (BIOS or boot loader configuration or by other ways.)
At same time, with this patches, we would overwrite EEE advertisement
configuration made over ethtool.
To avoid this issues, we need to cache initial and ethtool advertisement
configuration and store it for later use.
Fixes: 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()")
Fixes: 5827b168125d ("net: phy: c45: migrate to genphy_c45_write_eee_adv()")
Fixes: 022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add new genphy_c45_an_config_eee_aneg() function and replace some of
genphy_c45_write_eee_adv() calls. This will be needed by the next patch.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A PHY driver can use a static integer value to indicate what link mode
features it supports, i.e, its abilities.. This is the old way, but
useful when dynamically determining the devices features does not
work, e.g. support of fibre.
EEE support has been moved into phydev->supported_eee. This needs to
be set otherwise the code assumes EEE is not supported. It is normally
set as part of reading the devices abilities. However if a static
integer value was used, the dynamic reading of the abilities is not
performed. Add a call to genphy_c45_read_eee_abilities() to read the
EEE abilities.
Fixes: 8b68710a3121 ("net: phy: start using genphy_c45_ethtool_get/set_eee()")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Migrate from genphy_config_eee_advert() to genphy_c45_write_eee_adv().
It should work as before except write operation to the EEE adv registers
will be done only if some EEE abilities was detected.
If some driver will have a regression, related driver should provide own
.get_features callback. See micrel.c:ksz9477_get_features() as example.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add generic function for EEE abilities defined by IEEE 802.3
specification. For now following registers are supported:
- IEEE 802.3-2018 45.2.3.10 EEE control and capability 1 (Register 3.20)
- IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register
(Register 1.2295)
Since I was not able to find any flag signaling support of these
registers, we should detect link mode abilities first and then based on
these abilities doing EEE link modes detection.
Results of EEE ability detection will be stored into new variable
phydev->supported_eee.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
net/core/gro.c
7d2c89b32587 ("skb: Do mix page pool and page referenced frags in GRO")
b1a78b9b9886 ("net: add support for ipv4 big tcp")
https://lore.kernel.org/all/20230203094454.5766f160@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit bc66fa87d4fd ("net: phy: Add link between phy dev and mac dev")
introduced a link between net devices and phy devices. It fails to check
whether dev is NULL, leading to a NULL dereference error.
Fixes: bc66fa87d4fd ("net: phy: Add link between phy dev and mac dev")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some PHYs provide invalid IDs in C22 space. If C45 is supported on the
bus an attempt can be made to get the IDs from the C45 space. Decide
on this based on the presence of the C45 read method in the bus
structure. This will allow the unreliable probe_capabilities to be
removed.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch adds the required connection between netlink ethtool and
phylib to resolve PLCA get/set config and get status messages.
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the link modes for the IEEE 802.3cg Clause 147 10BASE-T1S
Ethernet PHY. According to the specifications, the 10BASE-T1S supports
Point-To-Point Full-Duplex, Point-To-Point Half-Duplex and/or
Point-To-Multipoint (AKA Multi-Drop) Half-Duplex operations.
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Until now, it is not possible for a PHY driver to disable interrupts
during runtime. If a driver offers the .config_intr() as well as the
.handle_interrupt() ops, it is eligible for interrupt handling.
Introduce a new flag for the dev_flags property of struct phy_device, which
can be set by PHY driver to skip interrupt setup and fall back to polling
mode.
At the moment, this is used for the MaxLinear PHY which has broken
interrupt handling and there is a need to disable interrupts in some
cases.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If the external phy used by current mac interface is
managed by another mac interface, it means that this
network port cannot work independently, especially
when the system suspends and resumes, the following
trace may appear, so we should create a device link
between phy dev and mac dev.
WARNING: CPU: 0 PID: 24 at drivers/net/phy/phy.c:983 phy_error+0x20/0x68
Modules linked in:
CPU: 0 PID: 24 Comm: kworker/0:2 Not tainted 6.1.0-rc3-00011-g5aaef24b5c6d-dirty #34
Hardware name: Freescale i.MX6 SoloX (Device Tree)
Workqueue: events_power_efficient phy_state_machine
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x68/0x90
dump_stack_lvl from __warn+0xb4/0x24c
__warn from warn_slowpath_fmt+0x5c/0xd8
warn_slowpath_fmt from phy_error+0x20/0x68
phy_error from phy_state_machine+0x22c/0x23c
phy_state_machine from process_one_work+0x288/0x744
process_one_work from worker_thread+0x3c/0x500
worker_thread from kthread+0xf0/0x114
kthread from ret_from_fork+0x14/0x28
Exception stack(0xf0951fb0 to 0xf0951ff8)
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221130021216.1052230-1-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I got the following report while doing device(mscc-miim) load test
with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled:
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /spi/soc@0/mdio@7107009c/ethernet-phy@0
If the 'fwnode' is not an acpi node, the refcount is get in
fwnode_mdiobus_phy_device_register(), but it has never been
put when the device is freed in the normal path. So call
fwnode_handle_put() in phy_device_release() to avoid leak.
If it's an acpi node, it has never been get, but it's put
in the error path, so call fwnode_handle_get() before
phy_device_register() to keep get/put operation balanced.
Fixes: bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221124150130.609420-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I got a null-ptr-deref report as following when doing fault injection test:
BUG: kernel NULL pointer dereference, address: 0000000000000058
Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G B N 6.1.0-rc3+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:klist_put+0x2d/0xd0
Call Trace:
<TASK>
klist_remove+0xf1/0x1c0
device_release_driver_internal+0x23e/0x2d0
bus_remove_device+0x1bd/0x240
device_del+0x357/0x770
phy_device_remove+0x11/0x30
mdiobus_unregister+0xa5/0x140
release_nodes+0x6a/0xa0
devres_release_all+0xf8/0x150
device_unbind_cleanup+0x19/0xd0
//probe path:
phy_device_register()
device_add()
phy_connect
phy_attach_direct() //set device driver
probe() //it's failed, driver is not bound
device_bind_driver() // probe failed, it's not called
//remove path:
phy_device_remove()
device_del()
device_release_driver_internal()
__device_release_driver() //dev->drv is not NULL
klist_remove() <- knode_driver is not added yet, cause null-ptr-deref
In phy_attach_direct(), after setting the 'dev->driver', probe() fails,
device_bind_driver() is not called, so the knode_driver->n_klist is not
set, then it causes null-ptr-deref in __device_release_driver() while
deleting device. Fix this by setting dev->driver to NULL in the error
path in phy_attach_direct().
Fixes: e13934563db0 ("[PATCH] PHY Layer fixup")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some PHYs can be linked with PSE (Power Sourcing Equipment), so search
for related nodes and attach it to the phydev.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the value
to be returned to user space.
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1664364860-29153-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume()
state") introduced a WARN() on resume from system sleep if a PHY is not
in PHY_HALTED state.
Commit 6dbe852c379f ("net: phy: Don't WARN for PHY_READY state in
mdio_bus_phy_resume()") added an exemption for PHY_READY state from
the WARN().
It turns out PHY_UP state needs to be exempted as well because the
following may happen on suspend:
mdio_bus_phy_suspend()
phy_stop_machine()
phydev->state = PHY_UP # if (phydev->state >= PHY_UP)
Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/netdev/2b1a1588-505e-dff3-301d-bfc1fb14d685@samsung.com/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/8128fdb51eeebc9efbf3776a4097363a1317aaf1.1663905575.git.lukas@wunner.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN
Link: https://lore.kernel.org/r/20220830201457.7984-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For some MAC drivers, they set the mac_managed_pm to true in its
->ndo_open() callback. So before the mac_managed_pm is set to true,
we still want to leverage the mdio_bus_phy_suspend()/resume() for
the phy device suspend and resume. In this case, the phy device is
in PHY_READY, and we shouldn't warn about this. It also seems that
the check of mac_managed_pm in WARN_ON is redundant since we already
check this in the entry of mdio_bus_phy_resume(), so drop it.
Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220819082451.1992102-1-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Calling mdio_bus_phy_resume() with neither the PHY state machine set to
PHY_HALTED nor phydev->mac_managed_pm set to true is a good indication
that we can produce a race condition looking like this:
CPU0 CPU1
bcmgenet_resume
-> phy_resume
-> phy_init_hw
-> phy_start
-> phy_resume
phy_start_aneg()
mdio_bus_phy_resume
-> phy_resume
-> phy_write(..., BMCR_RESET)
-> usleep() -> phy_read()
with the phy_resume() function triggering a PHY behavior that might have
to be worked around with (see bf8bfc4336f7 ("net: phy: broadcom: Fix
brcm_fet_config_init()") for instance) that ultimately leads to an error
reading from the PHY.
Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220801233403.258871-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.c
9c5de246c1db ("net: sparx5: mdb add/del handle non-sparx5 devices")
fbb89d02e33a ("net: sparx5: Allow mdb entries to both CPU and ports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Upon system sleep, mdio_bus_phy_suspend() stops the phy_state_machine(),
but subsequent interrupts may retrigger it:
They may have been left enabled to facilitate wakeup and are not
quiesced until the ->suspend_noirq() phase. Unwanted interrupts may
hence occur between mdio_bus_phy_suspend() and dpm_suspend_noirq(),
as well as between dpm_resume_noirq() and mdio_bus_phy_resume().
Retriggering the phy_state_machine() through an interrupt is not only
undesirable for the reason given in mdio_bus_phy_suspend() (freezing it
midway with phydev->lock held), but also because the PHY may be
inaccessible after it's suspended: Accesses to USB-attached PHYs are
blocked once usb_suspend_both() clears the can_submit flag and PHYs on
PCI network cards may become inaccessible upon suspend as well.
Amend phy_interrupt() to avoid triggering the state machine if the PHY
is suspended. Signal wakeup instead if the attached net_device or its
parent has been configured as a wakeup source. (Those conditions are
identical to mdio_bus_phy_may_suspend().) Postpone handling of the
interrupt until the PHY has resumed.
Before stopping the phy_state_machine() in mdio_bus_phy_suspend(),
wait for a concurrent phy_interrupt() to run to completion. That is
necessary because phy_interrupt() may have checked the PHY's suspend
status before the system sleep transition commenced and it may thus
retrigger the state machine after it was stopped.
Likewise, after re-enabling interrupt handling in mdio_bus_phy_resume(),
wait for a concurrent phy_interrupt() to complete to ensure that
interrupts which it postponed are properly rerun.
The issue was exposed by commit 1ce8b37241ed ("usbnet: smsc95xx: Forward
PHY interrupts to PHY driver to avoid polling"), but has existed since
forever.
Fixes: 541cd3ee00a4 ("phylib: Fix deadlock on resume")
Link: https://lore.kernel.org/netdev/a5315a8a-32c2-962f-f696-de9a26d30091@samsung.com/
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable@vger.kernel.org # v2.6.33+
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/b7f386d04e9b5b0e2738f0125743e30676f309ef.1656410895.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phylib can make use of the newly introduced mii_bmcr_encode_fixed()
macro, so let's convert it over.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|