| Age | Commit message (Collapse) | Author |
|---|
|
Let's pass the queue index to netif_napi_add_config() to preserve
per-NAPI config.
Test:
Set 100 to defer-hard-irqs (default is 0) and check the value after
link down & up.
$ cat /sys/class/net/enp39s0/napi_defer_hard_irqs
0
$ ./tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 65,
'ifindex': 2,
'irq': 29,
'irq-suspend-timeout': 0}]
$ sudo ./tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--do napi-set --json='{"id": 65, "defer-hard-irqs": 100}'
$ sudo ip link set enp39s0 down && sudo ip link set enp39s0 up
Without patch:
$ ./tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'defer-hard-irqs': 0, <------------------- Reset to 0
'gro-flush-timeout': 0,
'id': 66, <------------------------------- New ID
'ifindex': 2,
'irq': 29,
'irq-suspend-timeout': 0}]
With patch:
$ ./tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'defer-hard-irqs': 100, <--------------+-- Preserved
'gro-flush-timeout': 0, |
'id': 65, <----------------------------'
'ifindex': 2,
'irq': 29,
'irq-suspend-timeout': 0}]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com>
Link: https://patch.msgid.link/20250407164802.25184-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC cleanups from Eric Biggers:
"Finish cleaning up the CRC kconfig options by removing the remaining
unnecessary prompts and an unnecessary 'default y', removing
CONFIG_LIBCRC32C, and documenting all the CRC library options"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc: remove CONFIG_LIBCRC32C
lib/crc: document all the CRC library kconfig options
lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T
lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF
lib/crc: remove unnecessary prompt for CONFIG_CRC16
lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT
lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'
|
|
WX_RXD_IPV6EX was incorrectly defined in Rx ring descriptor. In fact, this
field stores the 802.1ad ID from which the packet was received. The wrong
definition caused the statistics rx_csum_offload_errors to fail to grow
when receiving the 802.1ad packet with incorrect checksum.
Fixes: ef4f3c19f912 ("net: wangxun: libwx add rx offload functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250407103322.273241-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use SPDX-License-Identifier accross all the files of the xgbe driver to
ensure compliance with Linux kernel standards, thus removing the
boiler-plate template license text.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407102913.3063691-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove the double negation and simplify the if condition.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250407091442.743478-1-thorsten.blum@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The __get_unaligned_cpu32 function is deprecated. So, replace it with
the more generic get_unaligned and just cast the input parameter.
Signed-off-by: Julian Vetter <julian@outer-limits.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407083306.1553921-1-julian@outer-limits.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The current code configures the Physical Function (PF) root node at TL1
and the Virtual Function (VF) root node at TL2.
This ensure at any given point of time PF traffic gets more priority.
PF root node
TL1
/ \
TL2 TL2 VF root node
/ \
TL3 TL3
/ \
TL4 TL4
/ \
SMQ SMQ
Due to a bug in the current code, the TL2 parent queue index on the
VF interface is not being configured, leading to 'SMQ Flush' errors
Fixes: 5e6808b4c68d ("octeontx2-pf: Add support for HTB offload")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407070341.2765426-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Now that LIBCRC32C does nothing besides select CRC32, make every option
that selects LIBCRC32C instead select CRC32 directly. Then remove
LIBCRC32C.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
v2:
- Created a single error handling unlock and exit in veth_pool_store
- Greatly expanded commit message with previous explanatory-only text
Summary: Use rtnl_mutex to synchronize veth_pool_store with itself,
ibmveth_close and ibmveth_open, preventing multiple calls in a row to
napi_disable.
Background: Two (or more) threads could call veth_pool_store through
writing to /sys/devices/vio/30000002/pool*/*. You can do this easily
with a little shell script. This causes a hang.
I configured LOCKDEP, compiled ibmveth.c with DEBUG, and built a new
kernel. I ran this test again and saw:
Setting pool0/active to 0
Setting pool1/active to 1
[ 73.911067][ T4365] ibmveth 30000002 eth0: close starting
Setting pool1/active to 1
Setting pool1/active to 0
[ 73.911367][ T4366] ibmveth 30000002 eth0: close starting
[ 73.916056][ T4365] ibmveth 30000002 eth0: close complete
[ 73.916064][ T4365] ibmveth 30000002 eth0: open starting
[ 110.808564][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification.
[ 230.808495][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification.
[ 243.683786][ T123] INFO: task stress.sh:4365 blocked for more than 122 seconds.
[ 243.683827][ T123] Not tainted 6.14.0-01103-g2df0c02dab82-dirty #8
[ 243.683833][ T123] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 243.683838][ T123] task:stress.sh state:D stack:28096 pid:4365 tgid:4365 ppid:4364 task_flags:0x400040 flags:0x00042000
[ 243.683852][ T123] Call Trace:
[ 243.683857][ T123] [c00000000c38f690] [0000000000000001] 0x1 (unreliable)
[ 243.683868][ T123] [c00000000c38f840] [c00000000001f908] __switch_to+0x318/0x4e0
[ 243.683878][ T123] [c00000000c38f8a0] [c000000001549a70] __schedule+0x500/0x12a0
[ 243.683888][ T123] [c00000000c38f9a0] [c00000000154a878] schedule+0x68/0x210
[ 243.683896][ T123] [c00000000c38f9d0] [c00000000154ac80] schedule_preempt_disabled+0x30/0x50
[ 243.683904][ T123] [c00000000c38fa00] [c00000000154dbb0] __mutex_lock+0x730/0x10f0
[ 243.683913][ T123] [c00000000c38fb10] [c000000001154d40] napi_enable+0x30/0x60
[ 243.683921][ T123] [c00000000c38fb40] [c000000000f4ae94] ibmveth_open+0x68/0x5dc
[ 243.683928][ T123] [c00000000c38fbe0] [c000000000f4aa20] veth_pool_store+0x220/0x270
[ 243.683936][ T123] [c00000000c38fc70] [c000000000826278] sysfs_kf_write+0x68/0xb0
[ 243.683944][ T123] [c00000000c38fcb0] [c0000000008240b8] kernfs_fop_write_iter+0x198/0x2d0
[ 243.683951][ T123] [c00000000c38fd00] [c00000000071b9ac] vfs_write+0x34c/0x650
[ 243.683958][ T123] [c00000000c38fdc0] [c00000000071bea8] ksys_write+0x88/0x150
[ 243.683966][ T123] [c00000000c38fe10] [c0000000000317f4] system_call_exception+0x124/0x340
[ 243.683973][ T123] [c00000000c38fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec
...
[ 243.684087][ T123] Showing all locks held in the system:
[ 243.684095][ T123] 1 lock held by khungtaskd/123:
[ 243.684099][ T123] #0: c00000000278e370 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x50/0x248
[ 243.684114][ T123] 4 locks held by stress.sh/4365:
[ 243.684119][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150
[ 243.684132][ T123] #1: c000000041aea888 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0
[ 243.684143][ T123] #2: c0000000366fb9a8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0
[ 243.684155][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_enable+0x30/0x60
[ 243.684166][ T123] 5 locks held by stress.sh/4366:
[ 243.684170][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150
[ 243.684183][ T123] #1: c00000000aee2288 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0
[ 243.684194][ T123] #2: c0000000366f4ba8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0
[ 243.684205][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_disable+0x30/0x60
[ 243.684216][ T123] #4: c0000003ff9bbf18 (&rq->__lock){-.-.}-{2:2}, at: __schedule+0x138/0x12a0
From the ibmveth debug, two threads are calling veth_pool_store, which
calls ibmveth_close and ibmveth_open. Here's the sequence:
T4365 T4366
----------------- ----------------- ---------
veth_pool_store veth_pool_store
ibmveth_close
ibmveth_close
napi_disable
napi_disable
ibmveth_open
napi_enable <- HANG
ibmveth_close calls napi_disable at the top and ibmveth_open calls
napi_enable at the top.
https://docs.kernel.org/networking/napi.html]] says
The control APIs are not idempotent. Control API calls are safe
against concurrent use of datapath APIs but an incorrect sequence of
control API calls may result in crashes, deadlocks, or race
conditions. For example, calling napi_disable() multiple times in a
row will deadlock.
In the normal open and close paths, rtnl_mutex is acquired to prevent
other callers. This is missing from veth_pool_store. Use rtnl_mutex in
veth_pool_store fixes these hangs.
Signed-off-by: Dave Marquardt <davemarq@linux.ibm.com>
Fixes: 860f242eb534 ("[PATCH] ibmveth change buffer pools dynamically")
Reviewed-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250402154403.386744-1-davemarq@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the current implementation octeontx2 manages XDP_ABORTED and XDP
invalid as XDP_PASS forwarding the skb to the networking stack.
Align the behaviour to other XDP drivers handling XDP_ABORTED and XDP
invalid as XDP_DROP.
Please note this patch has just compile tested.
Fixes: 06059a1a9a4a5 ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250401-octeontx2-xdp-abort-fix-v1-1-f0587c35a0b9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-04-02 (igc, e1000e, ixgbe, idpf)
For igc:
Joe Damato removes unmapping of XSK queues from NAPI instance.
Zdenek Bouska swaps condition checks/call to prevent AF_XDP Tx drops
with low budget value.
For e1000e:
Vitaly adjusts Kumeran interface configuration to prevent MDI errors.
For ixgbe:
Piotr clears PHY high values on media type detection to ensure stale
values are not used.
For idpf:
Emil adjusts shutdown calls to prevent NULL pointer dereference.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: fix adapter NULL pointer dereference on reboot
ixgbe: fix media type detection for E610 device
e1000e: change k1 configuration on MTP and later platforms
igc: Fix TX drops in XDP ZC
igc: Fix XSK queue NAPI ID mapping
====================
Link: https://patch.msgid.link/20250402173900.1957261-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Dev pointer in airoha_ppe_foe_entry_prepare routine is not strictly
a device allocated by airoha_eth driver since it is an egress device
and the flowtable can contain even wlan, pppoe or vlan devices. E.g:
flowtable ft {
hook ingress priority filter
devices = { eth1, lan1, lan2, lan3, lan4, wlan0 }
flags offload ^
|
"not allocated by airoha_eth" --
}
In this case airoha_get_dsa_port() will just return the original device
pointer and we can't assume netdev priv pointer points to an
airoha_gdm_port struct.
Fix the issue validating egress gdm port in airoha_ppe_foe_entry_prepare
routine before accessing net_device priv pointer.
Fixes: 00a7678310fe ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250401-airoha-validate-egress-gdm-port-v4-1-c7315d33ce10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When queue is being reset, callbacks of mgmt_ops are called by
netdev_nl_bind_rx_doit().
The netdev_nl_bind_rx_doit() first acquires netdev_lock() and then calls
callbacks.
So, mgmt_ops callbacks should not acquire netdev_lock() internaly.
The bnxt_queue_{start | stop}() calls napi_{enable | disable}() but they
internally acquire netdev_lock().
So, deadlock occurs.
To avoid deadlock, napi_{enable | disable}_locked() should be used
instead.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Fixes: cae03e5bdd9e ("net: hold netdev instance lock during queue operations")
Link: https://patch.msgid.link/20250402133123.840173-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since cited commit, ef100_probe_main() and hence also
ef100_check_design_params() run before efx->net_dev is created;
consequently, we cannot netif_set_tso_max_size() or _segs() at this
point.
Move those netif calls to ef100_probe_netdev(), and also replace
netif_err within the design params code with pci_err.
Reported-by: Kyungwook Boo <bookyungwook@gmail.com>
Fixes: 98ff4c7c8ac7 ("sfc: Separate netdev probe/remove from PCI probe/remove")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250401225439.2401047-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the tx tail is less than the head (in cases of wraparound), the TX
consumed descriptor statistic in DQ will be reported as
UINT32_MAX - head + tail, which is incorrect. Mask the difference of
head and tail according to the ring size when reporting the statistic.
Cc: stable@vger.kernel.org
Fixes: 2c9198356d56 ("gve: Add consumed counts to ethtool stats")
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250402001037.2717315-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Protect the parser TCAM/SRAM memory, and the cached (shadow) SRAM
information, from concurrent modifications.
Both the TCAM and SRAM tables are indirectly accessed by configuring
an index register that selects the row to read or write to. This means
that operations must be atomic in order to, e.g., avoid spreading
writes across multiple rows. Since the shadow SRAM array is used to
find free rows in the hardware table, it must also be protected in
order to avoid TOCTOU errors where multiple cores allocate the same
row.
This issue was detected in a situation where `mvpp2_set_rx_mode()` ran
concurrently on two CPUs. In this particular case the
MVPP2_PE_MAC_UC_PROMISCUOUS entry was corrupted, causing the
classifier unit to drop all incoming unicast - indicated by the
`rx_classifier_drops` counter.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250401065855.3113635-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With commit 8533b14b3d65 ("eth: mlx4: create a page pool for Rx") mlx4
started using functions guarded by PAGE_POOL. This change introduced
build errors when CONFIG_MLX4_EN is set but CONFIG_PAGE_POOL is not:
ld: vmlinux.o: in function `mlx4_en_alloc_frags':
en_rx.c:(.text+0xa5eaf9): undefined reference to `page_pool_alloc_pages'
ld: vmlinux.o: in function `mlx4_en_create_rx_ring':
(.text+0xa5ee91): undefined reference to `page_pool_create'
Make MLX4_EN select PAGE_POOL to fix the ml;x4 build errors.
Fixes: 8533b14b3d65 ("eth: mlx4: create a page pool for Rx")
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250401015315.2306092-1-gthelen@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ETS Qdisc schedules SP bands in a priority order assigning band-0 the
highest priority (band-0 > band-1 > .. > band-n) while EN7581 arranges
SP bands in a priority order assigning band-7 the highest priority
(band-7 > band-6, .. > band-n).
Fix priomap check in airoha_qdma_set_tx_ets_sched routine in order to
align ETS Qdisc and airoha_eth driver SP priority ordering.
Fixes: b56e4d660a96 ("net: airoha: Enforce ETS Qdisc priomap")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20250331-airoha-ets-validate-priomap-v1-1-60a524488672@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the following kernel warning deleting HTB offloaded leafs and/or root
HTB qdisc in airoha_eth driver properly reporting qid in
airoha_tc_get_htb_get_leaf_queue routine.
$tc qdisc replace dev eth1 root handle 10: htb offload
$tc class add dev eth1 arent 10: classid 10:4 htb rate 100mbit ceil 100mbit
$tc qdisc replace dev eth1 parent 10:4 handle 4: ets bands 8 \
quanta 1514 3028 4542 6056 7570 9084 10598 12112
$tc qdisc del dev eth1 root
[ 55.827864] ------------[ cut here ]------------
[ 55.832493] WARNING: CPU: 3 PID: 2678 at 0xffffffc0798695a4
[ 55.956510] CPU: 3 PID: 2678 Comm: tc Tainted: G O 6.6.71 #0
[ 55.963557] Hardware name: Airoha AN7581 Evaluation Board (DT)
[ 55.969383] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 55.976344] pc : 0xffffffc0798695a4
[ 55.979851] lr : 0xffffffc079869a20
[ 55.983358] sp : ffffffc0850536a0
[ 55.986665] x29: ffffffc0850536a0 x28: 0000000000000024 x27: 0000000000000001
[ 55.993800] x26: 0000000000000000 x25: ffffff8008b19000 x24: ffffff800222e800
[ 56.000935] x23: 0000000000000001 x22: 0000000000000000 x21: ffffff8008b19000
[ 56.008071] x20: ffffff8002225800 x19: ffffff800379d000 x18: 0000000000000000
[ 56.015206] x17: ffffffbf9ea59000 x16: ffffffc080018000 x15: 0000000000000000
[ 56.022342] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000001
[ 56.029478] x11: ffffffc081471008 x10: ffffffc081575a98 x9 : 0000000000000000
[ 56.036614] x8 : ffffffc08167fd40 x7 : ffffffc08069e104 x6 : ffffff8007f86000
[ 56.043748] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000001
[ 56.050884] x2 : 0000000000000000 x1 : 0000000000000250 x0 : ffffff800222c000
[ 56.058020] Call trace:
[ 56.060459] 0xffffffc0798695a4
[ 56.063618] 0xffffffc079869a20
[ 56.066777] __qdisc_destroy+0x40/0xa0
[ 56.070528] qdisc_put+0x54/0x6c
[ 56.073748] qdisc_graft+0x41c/0x648
[ 56.077324] tc_get_qdisc+0x168/0x2f8
[ 56.080978] rtnetlink_rcv_msg+0x230/0x330
[ 56.085076] netlink_rcv_skb+0x5c/0x128
[ 56.088913] rtnetlink_rcv+0x14/0x1c
[ 56.092490] netlink_unicast+0x1e0/0x2c8
[ 56.096413] netlink_sendmsg+0x198/0x3c8
[ 56.100337] ____sys_sendmsg+0x1c4/0x274
[ 56.104261] ___sys_sendmsg+0x7c/0xc0
[ 56.107924] __sys_sendmsg+0x44/0x98
[ 56.111492] __arm64_sys_sendmsg+0x20/0x28
[ 56.115580] invoke_syscall.constprop.0+0x58/0xfc
[ 56.120285] do_el0_svc+0x3c/0xbc
[ 56.123592] el0_svc+0x18/0x4c
[ 56.126647] el0t_64_sync_handler+0x118/0x124
[ 56.131005] el0t_64_sync+0x150/0x154
[ 56.134660] ---[ end trace 0000000000000000 ]---
Fixes: ef1ca9271313b ("net: airoha: Add sched HTB offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250331-airoha-htb-qdisc-offload-del-fix-v1-1-4ea429c2c968@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With SRIOV enabled, idpf ends up calling into idpf_remove() twice.
First via idpf_shutdown() and then again when idpf_remove() calls into
sriov_disable(), because the VF devices use the idpf driver, hence the
same remove routine. When that happens, it is possible for the adapter
to be NULL from the first call to idpf_remove(), leading to a NULL
pointer dereference.
echo 1 > /sys/class/net/<netif>/device/sriov_numvfs
reboot
BUG: kernel NULL pointer dereference, address: 0000000000000020
...
RIP: 0010:idpf_remove+0x22/0x1f0 [idpf]
...
? idpf_remove+0x22/0x1f0 [idpf]
? idpf_remove+0x1e4/0x1f0 [idpf]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x19f/0x200
pci_stop_bus_device+0x6d/0x90
pci_stop_and_remove_bus_device+0x12/0x20
pci_iov_remove_virtfn+0xbe/0x120
sriov_disable+0x34/0xe0
idpf_sriov_configure+0x58/0x140 [idpf]
idpf_remove+0x1b9/0x1f0 [idpf]
idpf_shutdown+0x12/0x30 [idpf]
pci_device_shutdown+0x35/0x60
device_shutdown+0x156/0x200
...
Replace the direct idpf_remove() call in idpf_shutdown() with
idpf_vc_core_deinit() and idpf_deinit_dflt_mbx(), which perform
the bulk of the cleanup, such as stopping the init task, freeing IRQs,
destroying the vports and freeing the mailbox. This avoids the calls to
sriov_disable() in addition to a small netdev cleanup, and destroying
workqueues, which don't seem to be required on shutdown.
Reported-by: Yuying Ma <yuma@redhat.com>
Fixes: e850efed5e15 ("idpf: add module register and probe functionality")
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The commit 23c0e5a16bcc ("ixgbe: Add link management support for E610
device") introduced incorrect media type detection for E610 device. It
reproduces when advertised speed is modified after driver reload. Clear
the previous outdated PHY type high value.
Reproduction steps:
modprobe ixgbe
ethtool -s eth0 advertise 0x1000000000000
modprobe -r ixgbe
modprobe ixgbe
ethtool -s eth0 advertise 0x1000000000000
Result before the fix:
netlink error: link settings update failed
netlink error: Invalid argument
Result after the fix:
No output error
Fixes: 23c0e5a16bcc ("ixgbe: Add link management support for E610 device")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Starting from Meteor Lake, the Kumeran interface between the integrated
MAC and the I219 PHY works at a different frequency. This causes sporadic
MDI errors when accessing the PHY, and in rare circumstances could lead
to packet corruption.
To overcome this, introduce minor changes to the Kumeran idle
state (K1) parameters during device initialization. Hardware reset
reverts this configuration, therefore it needs to be applied in a few
places.
Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake")
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fixes TX frame drops in AF_XDP zero copy mode when budget < 4.
xsk_tx_peek_desc() consumed TX frame and it was ignored because of
low budget. Not even AF_XDP completion was done for dropped frames.
It can be reproduced on i226 by sending 100000x 60 B frames with
launch time set to minimal IPG (672 ns between starts of frames)
on 1Gbit/s. Always 1026 frames are not sent and are missing a
completion.
Fixes: 9acf59a752d4c ("igc: Enable TX via AF_XDP zero-copy")
Signed-off-by: Zdenek Bouska <zdenek.bouska@siemens.com>
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In commit b65969856d4f ("igc: Link queues to NAPI instances"), the XSK
queues were incorrectly unmapped from their NAPI instances. After
discussion on the mailing list and the introduction of a test to codify
the expected behavior, we can see that the unmapping causes the
check_xsk test to fail:
NETIF=enp86s0 ./tools/testing/selftests/drivers/net/queues.py
[...]
# Check| ksft_eq(q.get('xsk', None), {},
# Check failed None != {} xsk attr on queue we configured
not ok 4 queues.check_xsk
After this commit, the test passes:
ok 4 queues.check_xsk
Note that the test itself is only in net-next, so I tested this change
by applying it to my local net-next tree, booting, and running the test.
Cc: stable@vger.kernel.org
Fixes: b65969856d4f ("igc: Link queues to NAPI instances")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Rather tiny pull request, mostly so that we can get into our trees
your fix to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc", error
queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported, avoid
spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files"
* tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits)
Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc"
bnxt_en: bring back rtnl lock in bnxt_shutdown
eth: gve: add missing netdev locks on reset and shutdown paths
selftests: mptcp: ignore mptcp_diag binary
selftests: mptcp: close fd_in before returning in main_loop
selftests: mptcp: fix incorrect fd checks in main_loop
mptcp: fix NULL pointer in can_accept_new_subflow
octeontx2-af: Free NIX_AF_INT_VEC_GEN irq
octeontx2-af: Fix mbox INTR handler when num VFs > 64
net: fix use-after-free in the netdev_nl_sock_priv_destroy()
selftests: net: use Path helpers in ping
selftests: net: use the dummy bpf from net/lib
selftests: drv-net: replace the rpath helper with Path objects
net: lapbether: use netdev_lockdep_set_classes() helper
net: phy: broadcom: Correct BCM5221 PHY model detection
net: usb: usbnet: restore usb%d name exception for local mac addresses
net/mlx5e: SHAMPO, Make reserved size independent of page size
net: mana: Switch to page pool for jumbo frames
MAINTAINERS: Add dedicated entries for phy_link_topology
net: move replay logic to tc_modify_qdisc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"The dmaengine subsystem updates for this cycle consist of a new driver
(Microchip) along with couple of yaml binding conversions, core api
updates and bunch of driver updates etc.
New HW support:
- Microchip sama7d65 dma controller
- Yaml conversion of atmel dma binding and Freescale Elo DMA
Controller binding
Core:
- Remove device_prep_dma_imm_data() API as users are removed
- Reduce scope of some less frequently used DMA request channel APIs
with aim to cleanup these in future
Updates:
- Drop Fenghua Yu from idxd maintainers, as he changed jobs
- AMD ptdma support for multiqueue and ae4dma deprecated PCI IDs
removal"
* tag 'dmaengine-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (29 commits)
dmaengine: ptdma: Utilize the AE4DMA engine's multi-queue functionality
dmaengine: ae4dma: Use the MSI count and its corresponding IRQ number
dmaengine: ae4dma: Remove deprecated PCI IDs
dmaengine: Remove device_prep_dma_imm_data from struct dma_device
dmaengine: ti: edma: support sw triggered chans in of_edma_xlate()
dmaengine: ti: k3-udma: Enable second resource range for BCDMA and PKTDMA
dmaengine: fsl-edma: free irq correctly in remove path
dmaengine: fsl-edma: cleanup chan after dma_async_device_unregister
dt-bindings: dma: snps,dw-axi-dmac: Allow devices to be marked as noncoherent
dmaengine: dmatest: Fix dmatest waiting less when interrupted
dt-bindings: dma: Convert fsl,elo*-dma to YAML
dt-bindings: dma: fsl-mxs-dma: Add compatible string for i.MX8 chips
dmaengine: Fix typo in comment
dmaengine: ti: k3-udma-glue: Drop skip_fdq argument from k3_udma_glue_reset_rx_chn
dmaengine: bcm2835-dma: fix warning when CONFIG_PM=n
dt-bindings: dma: fsl,edma: Add i.MX94 support
dt-bindings: dma: atmel: add microchip,sama7d65-dma
dmaengine: img-mdc: remove incorrect of_match_ptr annotation
dmaengine: idxd: Delete unnecessary NULL check
dmaengine: pxa: Enable compile test
...
|
|
Taehee reports missing rtnl from bnxt_shutdown path:
inetdev_event (./include/linux/inetdevice.h:256 net/ipv4/devinet.c:1585)
notifier_call_chain (kernel/notifier.c:85)
__dev_close_many (net/core/dev.c:1732 (discriminator 3))
kernel/locking/mutex.c:713 kernel/locking/mutex.c:732)
dev_close_many (net/core/dev.c:1786)
netif_close (./include/linux/list.h:124 ./include/linux/list.h:215
bnxt_shutdown (drivers/net/ethernet/broadcom/bnxt/bnxt.c:16707) bnxt_en
pci_device_shutdown (drivers/pci/pci-driver.c:511)
device_shutdown (drivers/base/core.c:4820)
kernel_restart (kernel/reboot.c:271 kernel/reboot.c:285)
Bring back the rtnl lock.
Link: https://lore.kernel.org/netdev/CAMArcTV4P8PFsc6O2tSgzRno050DzafgqkLA2b7t=Fv_SY=brw@mail.gmail.com/
Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL")
Reported-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250328174216.3513079-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All the misc entry points end up calling into either gve_open()
or gve_close(), they take rtnl_lock today but since the recent
instance locking changes should also take the instance lock.
Found by code inspection and untested.
Fixes: cae03e5bdd9e ("net: hold netdev instance lock during queue operations")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250328164742.1268069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Due to the incorrect initial vector number in
rvu_nix_unregister_interrupts(), NIX_AF_INT_VEC_GEN is not
geeting free. Fix the vector number to include NIX_AF_INT_VEC_GEN
irq.
Fixes: 5ed66306eab6 ("octeontx2-af: Add devlink health reporters for NIX")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250327094054.2312-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When number of RVU VFs > 64, the vfs value passed to "rvu_queue_work"
function is incorrect. Due to which mbox workqueue entries for
VFs 0 to 63 never gets added to workqueue.
Fixes: 9bdc47a6e328 ("octeontx2-af: Mbox communication support btw AF and it's VFs")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250327091441.1284-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull rdma updates from Jason Gunthorpe:
- Usual minor updates and fixes for bnxt_re, hfi1, rxe, mana, iser,
mlx5, vmw_pvrdma, hns
- Make rxe work on tun devices
- mana gains more standard verbs as it moves toward supporting
in-kernel verbs
- DMABUF support for mana
- Fix page size calculations when memory registration exceeds 4G
- On Demand Paging support for rxe
- mlx5 support for RDMA TRANSPORT flow tables and a new ucap mechanism
to access control use of them
- Optional RDMA_TX/RX counters per QP in mlx5
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (73 commits)
IB/mad: Check available slots before posting receive WRs
RDMA/mana_ib: Fix integer overflow during queue creation
RDMA/mlx5: Fix calculation of total invalidated pages
RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow
RDMA/mlx5: Fix page_size variable overflow
RDMA/mlx5: Drop access_flags from _mlx5_mr_cache_alloc()
RDMA/mlx5: Fix cache entry update on dereg error
RDMA/mlx5: Fix MR cache initialization error flow
RDMA/mlx5: Support optional-counters binding for QPs
RDMA/mlx5: Compile fs.c regardless of INFINIBAND_USER_ACCESS config
RDMA/core: Pass port to counter bind/unbind operations
RDMA/core: Add support to optional-counters binding configuration
RDMA/core: Create and destroy rdma_counter using rdma_zalloc_drv_obj()
RDMA/mlx5: Add optional counters for RDMA_TX/RX_packets/bytes
RDMA/core: Fix use-after-free when rename device name
RDMA/bnxt_re: Support perf management counters
RDMA/rxe: Fix incorrect return value of rxe_odp_atomic_op()
RDMA/uverbs: Propagate errors from rdma_lookup_get_uobject()
RDMA/mana_ib: Handle net event for pointing to the current netdev
net: mana: Change the function signature of mana_get_primary_netdev_rcu
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull fwctl subsystem from Jason Gunthorpe:
"fwctl is a new subsystem intended to bring some common rules and order
to the growing pattern of exposing a secure FW interface directly to
userspace.
Unlike existing places like RDMA/DRM/VFIO/uacce that are exposing a
device for datapath operations fwctl is focused on debugging,
configuration and provisioning of the device. It will not have the
necessary features like interrupt delivery to support a datapath.
This concept is similar to the long standing practice in the "HW" RAID
space of having a device specific misc device to manage the RAID
controller FW. fwctl generalizes this notion of a companion debug and
management interface that goes along with a dataplane implemented in
an appropriate subsystem.
There have been three LWN articles written discussing various aspects
of this:
https://lwn.net/Articles/955001/
https://lwn.net/Articles/969383/
https://lwn.net/Articles/990802/
This includes three drivers to launch the subsystem:
- CXL provides a vendor scheme for executing commands and a way to
learn the 'command effects' (ie the security properties) of such
commands. The fwctl driver allows access to these mechanism within
the fwctl security model
- mlx5 is family of networking products, the driver supports all
current Mellanox HW still receiving FW feature updates. This
includes RDMA multiprotocol NICs like ConnectX and the Bluefield
family of Smart NICs.
- AMD/Pensando Distributed Services card is a multi protocol Smart
NIC with a multi PCI function design. fwctl works on the management
PCI function following a 'command effects' model similar to CXL"
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (30 commits)
pds_fwctl: add Documentation entries
pds_fwctl: add rpc and query support
pds_fwctl: initial driver framework
pds_core: add new fwctl auxiliary_device
pds_core: specify auxiliary_device to be created
pds_core: make pdsc_auxbus_dev_del() void
cxl: Fixup kdoc issues for include/cxl/features.h
fwctl/cxl: Add documentation to FWCTL CXL
cxl/test: Add Set Feature support to cxl_test
cxl/test: Add Get Feature support to cxl_test
cxl: Add support to handle user feature commands for set feature
cxl: Add support to handle user feature commands for get feature
cxl: Add support for fwctl RPC command to enable CXL feature commands
cxl: Move cxl feature command structs to user header
cxl: Add FWCTL support to CXL
mlx5: Create an auxiliary device for fwctl_mlx5
fwctl/mlx5: Support for communicating with mlx5 fw
fwctl: Add documentation
fwctl: FWCTL_RPC to execute a Remote Procedure Call to device firmware
taint: Add TAINT_FWCTL
...
|
|
When hw-gro is enabled, the maximum number of header entries that are
needed per wqe (hd_per_wqe) is calculated based on the size of the
reservations among other parameters.
Miscalculation of the size of reservations leads to incorrect
calculation of hd_per_wqe as 0, particularly in the case of large page
size like in aarch64, this prevents the SHAMPO header from being
correctly initialized in the device, ultimately causing the following
cqe err that indicates a violation of PD.
mlx5_core 0000:00:08.0 eth2: ERR CQE on RQ: 0x1180
mlx5_core 0000:00:08.0 eth2: Error cqe on cqn 0x510, ci 0x0, qn 0x1180, opcode 0xe, syndrome 0x4, vendor syndrome 0x32
00000000: 00 00 00 00 04 4a 00 00 00 00 00 00 20 00 93 32
00000010: 55 00 00 00 fb cc 00 00 00 00 00 00 07 18 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4a
00000030: 00 00 00 9a 93 00 32 04 00 00 00 00 00 00 da e1
Use the correct formula for calculating the size of reservations,
precisely it shouldn't be dependent on page size, instead use the
correct multiply of MLX5E_SHAMPO_WQ_BASE_RESRV_SIZE.
Fixes: e5ca8fb08ab2 ("net/mlx5e: Add control path for SHAMPO feature")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1742732906-166564-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Frag allocators, such as netdev_alloc_frag(), were not designed to
work for fragsz > PAGE_SIZE.
So, switch to page pool for jumbo frames instead of using page frag
allocators. This driver is using page pool for smaller MTUs already.
Cc: stable@vger.kernel.org
Fixes: 80f6215b450e ("net: mana: Add support for jumbo frame")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://patch.msgid.link/1742920357-27263-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Remove support for IBM Cell Blades
- SMP support for microwatt platform
- Support for inline static calls on PPC32
- Enable pmu selftests for power11 platform
- Enable hardware trace macro (HTM) hcall support
- Support for limited address mode capability
- Changes to RMA size from 512 MB to 768 MB to handle fadump
- Misc fixes and cleanups
Thanks to Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann,
Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom,
Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook,
Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani
(IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav
Jain, and Venkat Rao Bagalkote.
* tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (61 commits)
powerpc/kexec: fix physical address calculation in clear_utlb_entry()
crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD
powerpc: Fix 'intra_function_call not a direct call' warning
powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu'
KVM: PPC: Enable CAP_SPAPR_TCE_VFIO on pSeries KVM guests
powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7
powerpc/microwatt: Add SMP support
powerpc: Define config option for processors with broadcast TLBIE
powerpc/microwatt: Define an idle power-save function
powerpc/microwatt: Device-tree updates
powerpc/microwatt: Select COMMON_CLK in order to get the clock framework
net: toshiba: Remove reference to PPC_IBM_CELL_BLADE
net: spider_net: Remove powerpc Cell driver
cpufreq: ppc_cbe: Remove powerpc Cell driver
genirq: Remove IRQ_EDGE_EOI_HANDLER
docs: Remove reference to removed CBE_CPUFREQ_SPU_GOVERNOR
powerpc: Remove UDBG_RTAS_CONSOLE
powerpc/io: Use standard barrier macros in io.c
powerpc/io: Rename _insw_ns() etc.
powerpc/io: Use generic raw accessors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
|
|
Merge in late fixes to prepare for the 6.15 net-next PR.
No conflicts, adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
919f9f497dbc ("eth: bnxt: fix out-of-range access of vnic_info array")
fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
|
|
The hardware only supports L4 checksum offload for TCP/UDP/SCTP protocol.
There was a bug to set Tx checksum flag for the other protocol that results
in Tx ring hang. Fix to compute software checksum for these packets.
Fixes: 3403960cdf86 ("net: wangxun: libwx add tx offload functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250324103235.823096-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The length of skb header was incorrectly calculated when transmit a tunnel
packet with outer IPv6 extension header, or a IP over IP packet which has
inner IPv6 header. Thus the correct Tx context descriptor cannot be
composed, resulting in Tx ring hang.
Fixes: 3403960cdf86 ("net: wangxun: libwx add tx offload functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250324103235.823096-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the PCI-ID of the AQR105-based Tehuti TN4010 cards to allow loading
of the tn40xx driver on these cards. Here, I chose the detailed definition
with the subvendor ID similar to the QT2025 cards with the PCI-ID
TEHUTI:0x4022, because there is a card with an AQ2104 hiding amongst the
AQR105 cards, and they all come with the same PCI-ID (TEHUTI:0x4025). But
the AQ2104 is currently not supported.
Signed-off-by: Hans-Frieder Vogt <hfdevel@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250322-tn9510-v3a-v7-7-672a9a3d8628@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prepare the tn40xx driver to load for Tehuti TN9510 cards, which require
bit 3 in the register TN40_REG_MDIO_CMD_STAT to be set. The function of bit
3 is unclear, but may have something to do with the length of the preamble
in the MDIO communication. If bit 3 is not set, the PHY will not be found
when performing a scan for PHYs. Use the available tn40_mdio_set_speed
function which includes setting bit 3. Just move the function to before the
devm_mdio_register function, which scans the mdio bus for PHYs.
Signed-off-by: Hans-Frieder Vogt <hfdevel@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20250322-tn9510-v3a-v7-6-672a9a3d8628@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of an AQR105-based device, create a software node for the mdio
function, with a child node for the Aquantia AQR105 PHY, providing a
firmware-name (and a bit more, which may be used for future checks) to
allow the PHY to load a MAC specific firmware from the file system.
The name of the PHY software node follows the naming convention suggested
in the patch for the mdiobus_scan function (in the same patch series).
Signed-off-by: Hans-Frieder Vogt <hfdevel@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250322-tn9510-v3a-v7-5-672a9a3d8628@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds support for running XDP programs on DQ, along with
rudimentary processing for XDP_DROP and XDP_PASS. These actions require
very limited driver functionality when it comes to processing an XDP
buffer, so currently if the XDP action is not XDP_PASS, the packet is
dropped and stats are updated.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaliginedi <pkaligineedi@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy<hramamurthy@google.com>
Link: https://patch.msgid.link/20250321002910.1343422-7-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to support installing an XDP program on DQ, RX buffers need to
be reposted using 4K buffers, which is larger than the default packet
buffer size of 2K. This is needed to accommodate the extra head and tail
that accompanies the data portion of an XDP buffer. Continuing to use 2K
buffers would mean that the packet buffer size for the NIC would have to
be restricted to 2048 - 320 - 256 = 1472B. However, this is problematic
for two reasons: first, 1472 is not a packet buffer size accepted by
GVE; second, at least 1474B of buffer space is needed to accommodate an
MTU of 1460, which is the default on GCP. As such, we allocate 4K
buffers, and post a 2K section of those 4K buffers (offset relative to
the XDP headroom) to the NIC for DMA to avoid a potential extra copy.
Because the GQ-QPL datapath requires copies regardless, this change was
not needed to support XDP in that case.
To capture this subtlety, a new field, packet_buffer_truesize, has been
added to the rx ring struct to represent size of the allocated buffer,
while packet_buffer_size has been left to represent the portion of the
buffer posted to the NIC.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250321002910.1343422-6-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The data_buffer_size_dqo field in gve_priv and the packet_buffer_size
field in gve_rx_ring theoretically have the same meaning, but they are
defined in two different places and used in two separate contexts. There
is no good reason for this, so this change merges those fields into the
packet_buffer_size field in the RX ring.
This change also introduces a packet_buffer_size field to struct
gve_rx_queue_config to account for cases where queues are not allocated,
such as when the interface is down.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250321002910.1343422-5-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit ebdfae0d377b ("gve: adopt page pool for DQ RDA mode") introduced
a buf_size field to the gve_rx_slot_page_info struct, which can be used
in the datapath to take the place of the packet_buffer_size field, as it
will already be hot in the cache due to its extensive use. Using the
buf_size field in the datapath frees up the packet_buffer_size field in
the GQ-specific RX cacheline to be generalized for GQ and DQ (in the
next patch), as there is currently no common packet buffer size field
between the two queue formats.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250321002910.1343422-4-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
An earlier patch series[1] introduced RX/TX ring allocation configuration
structs which contained metadata used to allocate and configure new RX
and TX rings. This led to a much cleaner and safer allocation pattern
wherein queue resources were not deallocated until new queue resources
were successfully allocated.
Migrate the XDP allocation path to use the same pattern to allow for the
existence of a single allocation path instead of relying on XDP-specific
allocation methods. These extra allocation methods result in the
duplication of many existing behaviors while being prone to error when
configuration changes unrelated to XDP occur.
Link: https://lore.kernel.org/netdev/20240122182632.1102721-1-shailend@google.com/ [1]
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250321002910.1343422-3-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These statistics pollute the hotpath and do not have any real-world use
or meaning.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250321002910.1343422-2-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
