summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2014-05-21i40e: Don't disable SR-IOV when VFs are assignedMitch Williams
When VFs are assigned to active VMs and we disable SR-IOV out from under them, bad things happen. Currently, the VM does not crash, but the VFs lose all resources and have no way to get them back. Add an additional check for when the user is disabling through sysfs, and add a comment to clarify why we check twice. Change-ID: Icad78eef516e4e1e4a87874d59132bc3baa058d4 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e: remove hardcode of stats struct size in ethtoolShannon Nelson
Base the queue stats length on the queue stats struct rather than assuming it is 2 fields. This is in prep for adding data fields which are configuration dependent. Change-ID: I937f471f389d2e0f8cec733960c5d9a06b14f3ec Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e/i40evf: control auto ITR through ethtoolMitch Williams
For all of our supported kernels, ethtool allows us to directly control adaptive ITR instead of just faking it with an ITR value. Support this capability so that user knows explicitly when ITR is being controlled dynamically. Suggested by Ben Hutchings. CC: Ben Hutchings <ben@decadent.org.uk> Change-ID: Iae6b79c5db767a63d22ecd9a9c24acaff02a096e Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e/i40evf: set proper default for ITR registersMitch Williams
Ethtool consistently reports 0 values for our ITR settings because we never actually set them. Fix this by setting the default values to the specified default values. Change-ID: I2832406a66f7140f2b1230945d6ff6cbf77467c8 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40evf: make ethtool_ops constMitch Williams
Const-ify the ethtool_ops structure, as it is extremely unlikely to change at runtime. Suggested by Ben Hutchings. CC: Ben Hutchings <ben@decadent.org.uk> Change-ID: I1ccb1b7c3ea801cc934447599a35910e7c93d321 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40evf: don't lie to ethtoolMitch Williams
Don't tell ethtool that the VF can do 10GbaseT, when it really has no idea what its link speed is. Set the supported values to 0 instead. Suggested by Ben Hutchings. CC: Ben Hutchings <ben@decadent.org.uk> Change-ID: Iceb0d8af68fe5d8dc13224366979ba701ba89c39 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40evf: Use macro param for ethtool statsMitch Williams
Use a macro parameter for ethtool stats instead of just assuming that a valid netdev variable exists. Suggested by Ben Hutchings. CC: Ben Hutchings <ben@decadent.org.uk> Change-ID: I66681698573c1549f95fdea310149d8a7e96a60f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e: add required includeMitch Williams
On some architectures, this header must be explicitly included. Change-ID: I4bc2eb0531956a7b676489f79d347d55cfe12421 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40evf: Fix the headers and update copyright year.Jesse Brandeburg
Adding the appropriate GNU General Public License header and update copyright year to 2014. Change-ID: I769dd2d37d70350afd0c8727ae2859c0fd340361 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40evf: Remove unused definesCatherine Sullivan
Remove the defines for PCI bus info that are never used. Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40evf: Update AdminQ interfaceShannon Nelson
Minor changes to the AdminQ interface to bring it up-to-date. Change-ID: Ie31a4cc4911b2d9d3b7f9af2e56fb0ae674f6345 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-18net: ethernet: ibm: ehea: ehea_qmr.c: Fix for possible null pointer dereferenceRickard Strandqvist
There is otherwise a risk of a possible null pointer dereference. Was largely found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-18net: 8390: use time_after() for time comparisonManuel Schölling
To be future-proof and for better readability the time comparisons are modified to use time_after() instead of raw math. Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-18net/mlx4_en: Fix uninitialized use of 'port_up' in mlx4_en_set_channels()Christian Engelmayer
Function mlx4_en_set_channels() stops running ports before performing the requested action. In that case local variable 'port_up' is set so that the port is restarted at the end of the function, however, in case the port was not stopped, variable 'port_up' is left uninitialized and the behaviour is undetermined. Detected by Coverity - CID 751497. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Acked-By: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-18bnx2x: Convert return 0 to return rcJoe Perches
These "return 0;" uses seem wrong as there are rc variables where error return values are set but unused. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-19ethtool, be2net: constify array pointer parameters to ethtool_ops::set_rxfhBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-05-16net: mvneta: add support for fixed linksThomas Petazzoni
Following the introduction of of_phy_register_fixed_link(), this patch introduces fixed link support in the mvneta driver, for Marvell Armada 370/XP SOCs. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16net: pch_gbe depends on x86_32Jean Delvare
The pch_gbe driver is for a companion chip to the Intel Atom E600 series processors. These are 32-bit x86 processors so the driver is only needed on X86_32. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Jiri Slaby <jslaby@suse.cz> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16net: systemport: wait for packet in umac_enable_set()Florian Fainelli
When umac_enable_set() is used to disable the UniMAC receiver or transmitter, we need to make sure that we wait for a full-sized packet to be processed because the UniMAC hardware stops on a packet boundary, not immediately. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16net: systemport: fix dma_unmap_single() lenFlorian Fainelli
dma_unmap_single() was called with dma_unmap_len(cb, dma_len), unfortunately we failed to assign this length field in bcm_sysport_rx_refill() or bcm_sysport_alloc_rx_bufs() using dma_unmap_len_set(). This causes packet contents corruption because are we not invoking the cache invalidation routines with the proper length. Fix this by using the full RX buffer size (RX_BUF_LENGTH) because the mappings for the RX bufers are created with that size. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16net/mlx4_core: Add UPDATE_QP SRIOV wrapper supportMatan Barak
This patch adds UPDATE_QP SRIOV wrapper support. The mechanism is a general one, but currently only source MAC index changes are allowed for VFs. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15net/ariadne: delete unneeded call to netdev_privJulia Lawall
Netdev_priv is an accessor function, and has no purpose if its result is not used. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ local idexpression x; @@ -x = netdev_priv(...); ... when != x // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15net: systemport: pad packets to a minimum of 68 bytesFlorian Fainelli
Packets need to be at least 64 bytes to enter the switch port logic, including the FCS, otherwise they will be discarded as RUNT packets. With packets having Broadcom tags, the 4-bytes tag is first stripped off the packet, and the packet length is then checked, so we need to make sure that the packet length with FCS is at least 64 bytes. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15net: systemport: only update UMAC_CMD if something changedFlorian Fainelli
The link adjustment callback can be called as frequently as desired by the PHY library, as such, let's avoid doing a Read/Modify/Write sequence if nothing changed, which is more than likely since we are interfaced with a switch device. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15Altera TSE: Disable Multicast filtering to workaround problemVince Bridgers
This patch disables multicast hash filtering if present in the hardware and uses promiscuous mode instead until the problem with multicast filtering has been debugged, integrated and tested. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15Altera TSE: Fix sparse errors and warningsVince Bridgers
This patch fixes the many sparse errors and warnings contained in the initial submission of the Altera Triple Speed Ethernet driver, and a few minor cppcheck warnings. Changes are tested on ARM and NIOS2 example designs, and compile tested against multiple architectures. Typical issues addressed were as follows: altera_tse_ethtool.c:136:19: warning: incorrect type in argument 1 (different address spaces) altera_tse_ethtool.c:136:19: expected void const volatile [noderef] <asn:2>*addr altera_tse_ethtool.c:136:19: got unsigned int *<noident> ... altera_sgdma.c:129:31: warning: cast removes address space of expression Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15ti: Remove trailing semicolon from do {...} while (0) macroJoe Perches
These should not have trailing semicolons so remove them. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15drivers: net: Register Micrel ksz884x network devices in PCI device tree.Markus Lottmann
This unifies the behaviour with other network device drivers and allows for a matching of the PCI device path in UDEV rules. Signed-off-by: Markus Lottmann <markus.lottmann1986@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15drivers: net: davinci_cpdma: Convert kzalloc() to devm_kzalloc().George Cherian
Convert kzalloc() to devm_kzalloc(). Signed-off-by: George Cherian <george.cherian@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15net: davinci_mdio: Convert pr_err() to dev_err() callGeorge Cherian
Convert the lone pr_err() to dev_err() call. Signed-off-by: George Cherian <george.cherian@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15driver net: cpsw: Convert pr_*() to dev_*() callsGeorge Cherian
Convert all pr_*() calls to dev_*() calls. No functional changes. Signed-off-by: George Cherian <george.cherian@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14driver/net/ethernet/ec_bhf.c: fix sparse warningsDarek Marcinkiewicz
Sparse was reporting quite a few warnings for the driver. Those get fixed by this patch. Signed-off-by: Dariusz Marcinkiewicz <reksio@newterm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14net: systemport: Use devm_ioremap_resource()Jingoo Han
Use devm_ioremap_resource() because devm_request_and_ioremap() is obsoleted by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14net/mlx4_core: Fix inaccurate return value of mlx4_flow_attach()Eyal Perry
Adopt the "info: why not propagate 'ret' from parse_trans_rule()..." suggestion made by the smatch semantic checker on: drivers/net/ethernet/mellanox/mlx4/mcg.c:867 mlx4_flow_attach() Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14net/mlx4_en: Using positive error value for unsignedEyal Perry
Using a positive value for error: MLX4_NET_TRANS_RULE_NUM instead of -EPROTONOSUPPORT, to remove compilation warning. Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14net/mlx4_en: Protect MAC address modification with the state_lock mutexShani Michaelli
This Patches solves an issue that could raise when modifying the device's MAC. It occurs due to a simultaneous access to priv->mac_hash from two contexts. The buggy scenario described below: Context 1: copy the new mac address to the dev->dev_addr field. Context 2: mlx4_en_do_uc_filter removes prev_mac entry from the mac_hash db since it is not in dev->uc and not equal to dev->dev_addr. Context 1: mlx4_en_do_set_mac() calls mlx4_en_replace_mac() to replace prev_mac with dev_addr but it fails to update the mac_hash db since it no longer contains prev_mac, therefore it returns with an error. The fix is to prevent mlx4_en_do_uc_filter from being executed by both of the context 1 calls described above, This is done by putting them both under the mdev->state_lock lock, it will solve this issue since mlx4_en_do_uc_filter is already protected by the mdev->state_lock. Reviewed-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14net/mlx4_core: Removed unnecessary bit operation conditionEyal Perry
Fix the "warn: suspicious bitop condition" made by the smatch semantic checker on: drivers/net/ethernet/mellanox/mlx4/main.c:509 mlx4_slave_cap() Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14net/mlx4_core: Fix smatch error - possible access to a null variableEyal Perry
Fix the "error: we previously assumed 'out_param' could be null" found by smatch semantic checker on: drivers/net/ethernet/mellanox/mlx4/cmd.c:506 mlx4_cmd_poll() drivers/net/ethernet/mellanox/mlx4/cmd.c:578 mlx4_cmd_wait() Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14net/mlx4_en: Fix errors in MAC address changing when port is downShani Michaelli
This patch fix an issue that happen when changing the MAC address when the port is down, described as follows: 1. Set the port down. 2. Change the MAC address - mlx4_en_set_mac() will change dev->dev_addr. 3. Set the port up - will result in mlx4_en_do_uc_filter that will remove the prev_mac entry from the mac_hash db. 4. Changing the MAC address again will eventually trigger the call to mlx4_en_replace_mac() in order to replace prev_mac with dev_addr but the prev_mac entry is already not exist in the mac_hash db therefore the operation fails. The fix is to set the prev_mac with the new MAC address so in step 3 above, after setting the port up mlx4_en_get_qp() is updating the mac_hash with the entry of dev_addr which is equal to prev_mac. Therefore in step 4, when calling mlx4_en_replace_mac, the entry related to prev_mac exist in mac_hash and the replace operation succeed. Reviewed-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14net/mlx4_en: User prio mapping gets corrupted when changing number of channelsIdo Shamay
When using ethtool set_channels, mlx4_en_setup_tc is always called, even when it was not configured. Fixed code to call mlx4_en_setup_tc() only if needed. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14net/mlx4_core: Enforce irq affinity changes immediatlyYuval Atias
During heavy traffic, napi is constatntly polling the complition queue and no interrupt is fired. Because of that, changes to irq affinity are ignored until traffic is stopped and resumed. By registering to the irq notifier mechanism, and forcing interrupt when affinity is changed, irq affinity changes will be immediatly enforced. Signed-off-by: Yuval Atias <yuvala@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14be2net: enable interrupts in EEH resumeKalesh AP
On some BE3 FW versions, after a HW reset, interrupts will remain disabled for each function. So, explicitly enable the interrupts in the eeh_resume handler, else after an eeh recovery interrupts wouldn't work. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14jme: Fix unmap loop counting error:Neil Horman
In my recent fix (76a691d0a: fix dma unmap warning), Ben Hutchings noted that my loop count was incorrect. Where j started at startidx, it should have started at zero, and gone on for count entries, not to endidx. Additionally, a DMA resource exhaustion should drop the frame and (for now), return NETDEV_TX_OK, not NETEV_TX_BUSY. This patch fixes both of those issues: Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Ben Hutchings <ben@decadent.org.uk> CC: "David S. Miller" <davem@davemloft.net> CC: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13sh_eth: replace devm_kzalloc() with devm_kmalloc_array()Sergei Shtylyov
When I was converting the driver to the managed device API, only devm_kzalloc() was available for memory allocation, so I had to use it, despite zeroing out the PHY IRQ array right before initializing all its entries to PHY_POLL was quite stupid. Now that devm_kmalloc_array() has become available, we can avoid the needless zeroing out... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13tg3: Update copyright and version to 3.137Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13tg3: Prevent page allocation failure during TSO workaroundMichael Chan
If any TSO fragment hits hardware bug conditions (e.g. 4G boundary), the driver will workaround by calling skb_copy() to copy to a linear SKB. Users have reported page allocation failures as the TSO packet can be up to 64K. Copying such a large packet is also very inefficient. We fix this by using existing tg3_tso_bug() to transmit the packet using GSO. Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13tg3: Don't modify ip header fields when doing GSOMichael Chan
tg3 uses GSO as workaround if the hardware cannot perform TSO on certain packets. We should not modify the ip header fields if we do GSO on the packet. It happens to work by accident because GSO recalculates the IP checksum and IP total length. Also fix the tg3_start_xmit comment to reflect that this is the only xmit function for all devices. Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13arc_emac: add netpoll supportBeniamino Galvani
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13arc_emac: implement promiscuous mode and multicast filteringBeniamino Galvani
This patch implements the set_rx_mode function to enable/disable promiscuous or all-multicast modes and to update the multicast filtering list of the device. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 04:41:18 +0000