summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2023-07-18Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-07-17 (iavf) This series contains updates to iavf driver only. Ding Hui fixes use-after-free issue by calling netif_napi_del() for all allocated q_vectors. He also resolves out-of-bounds issue by not updating to new values when timeout is encountered. Marcin and Ahmed change the way resets are handled so that the callback operating under the RTNL lock will wait for the reset to finish, the rtnl_lock sensitive functions in reset flow will schedule the netdev update for later in order to remove circular dependency with the critical lock. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: fix reset task race with iavf_remove() iavf: fix a deadlock caused by rtnl and driver's lock circular dependencies Revert "iavf: Do not restart Tx queues after reset task failure" Revert "iavf: Detach device during reset task" iavf: Wait for reset in callbacks which trigger it iavf: use internal state to free traffic IRQs iavf: Fix out-of-bounds when setting channels on remove iavf: Fix use-after-free in free_netdev ==================== Link: https://lore.kernel.org/r/20230717175205.3217774-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-18octeontx2-pf: mcs: Generate hash key using ecb(aes)Subbaraya Sundeep
Hardware generated encryption and ICV tags are found to be wrong when tested with IEEE MACSEC test vectors. This is because as per the HRM, the hash key (derived by AES-ECB block encryption of an all 0s block with the SAK) has to be programmed by the software in MCSX_RS_MCS_CPM_TX_SLAVE_SA_PLCY_MEM_4X register. Hence fix this by generating hash key in software and configuring in hardware. Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://lore.kernel.org/r/1689574603-28093-1-git-send-email-sbhatta@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-18igc: Prevent garbled TX queue with XDP ZEROCOPYFlorian Kauer
In normal operation, each populated queue item has next_to_watch pointing to the last TX desc of the packet, while each cleaned item has it set to 0. In particular, next_to_use that points to the next (necessarily clean) item to use has next_to_watch set to 0. When the TX queue is used both by an application using AF_XDP with ZEROCOPY as well as a second non-XDP application generating high traffic, the queue pointers can get in an invalid state where next_to_use points to an item where next_to_watch is NOT set to 0. However, the implementation assumes at several places that this is never the case, so if it does hold, bad things happen. In particular, within the loop inside of igc_clean_tx_irq(), next_to_clean can overtake next_to_use. Finally, this prevents any further transmission via this queue and it never gets unblocked or signaled. Secondly, if the queue is in this garbled state, the inner loop of igc_clean_tx_ring() will never terminate, completely hogging a CPU core. The reason is that igc_xdp_xmit_zc() reads next_to_use before acquiring the lock, and writing it back (potentially unmodified) later. If it got modified before locking, the outdated next_to_use is written pointing to an item that was already used elsewhere (and thus next_to_watch got written). Fixes: 9acf59a752d4 ("igc: Enable TX via AF_XDP zero-copy") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230717175444.3217831-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-18octeontx2-pf: Dont allocate BPIDs for LBK interfacesGeetha sowjanya
Current driver enables backpressure for LBK interfaces. But these interfaces do not support this feature. Hence, this patch fixes the issue by skipping the backpressure configuration for these interfaces. Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool"). Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/20230716093741.28063-1-gakula@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-18Merge branch '100GbE' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-07-14 (ice) This series contains updates to ice driver only. Petr Oros removes multiple calls made to unregister netdev and devlink_port. Michal fixes null pointer dereference that can occur during reload. ==================== Link: https://lore.kernel.org/r/20230714201041.1717834-1-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-17iavf: fix reset task race with iavf_remove()Ahmed Zaki
The reset task is currently scheduled from the watchdog or adminq tasks. First, all direct calls to schedule the reset task are replaced with the iavf_schedule_reset(), which is modified to accept the flag showing the type of reset. To prevent the reset task from starting once iavf_remove() starts, we need to check the __IAVF_IN_REMOVE_TASK bit before we schedule it. This is now easily added to iavf_schedule_reset(). Finally, remove the check for IAVF_FLAG_RESET_NEEDED in the watchdog task. It is redundant since all callers who set the flag immediately schedules the reset task. Fixes: 3ccd54ef44eb ("iavf: Fix init state closure on remove") Fixes: 14756b2ae265 ("iavf: Fix __IAVF_RESETTING state usage") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-17iavf: fix a deadlock caused by rtnl and driver's lock circular dependenciesAhmed Zaki
A driver's lock (crit_lock) is used to serialize all the driver's tasks. Lockdep, however, shows a circular dependency between rtnl and crit_lock. This happens when an ndo that already holds the rtnl requests the driver to reset, since the reset task (in some paths) tries to grab rtnl to either change real number of queues of update netdev features. [566.241851] ====================================================== [566.241893] WARNING: possible circular locking dependency detected [566.241936] 6.2.14-100.fc36.x86_64+debug #1 Tainted: G OE [566.241984] ------------------------------------------------------ [566.242025] repro.sh/2604 is trying to acquire lock: [566.242061] ffff9280fc5ceee8 (&adapter->crit_lock){+.+.}-{3:3}, at: iavf_close+0x3c/0x240 [iavf] [566.242167] but task is already holding lock: [566.242209] ffffffff9976d350 (rtnl_mutex){+.+.}-{3:3}, at: iavf_remove+0x6b5/0x730 [iavf] [566.242300] which lock already depends on the new lock. [566.242353] the existing dependency chain (in reverse order) is: [566.242401] -> #1 (rtnl_mutex){+.+.}-{3:3}: [566.242451] __mutex_lock+0xc1/0xbb0 [566.242489] iavf_init_interrupt_scheme+0x179/0x440 [iavf] [566.242560] iavf_watchdog_task+0x80b/0x1400 [iavf] [566.242627] process_one_work+0x2b3/0x560 [566.242663] worker_thread+0x4f/0x3a0 [566.242696] kthread+0xf2/0x120 [566.242730] ret_from_fork+0x29/0x50 [566.242763] -> #0 (&adapter->crit_lock){+.+.}-{3:3}: [566.242815] __lock_acquire+0x15ff/0x22b0 [566.242869] lock_acquire+0xd2/0x2c0 [566.242901] __mutex_lock+0xc1/0xbb0 [566.242934] iavf_close+0x3c/0x240 [iavf] [566.242997] __dev_close_many+0xac/0x120 [566.243036] dev_close_many+0x8b/0x140 [566.243071] unregister_netdevice_many_notify+0x165/0x7c0 [566.243116] unregister_netdevice_queue+0xd3/0x110 [566.243157] iavf_remove+0x6c1/0x730 [iavf] [566.243217] pci_device_remove+0x33/0xa0 [566.243257] device_release_driver_internal+0x1bc/0x240 [566.243299] pci_stop_bus_device+0x6c/0x90 [566.243338] pci_stop_and_remove_bus_device+0xe/0x20 [566.243380] pci_iov_remove_virtfn+0xd1/0x130 [566.243417] sriov_disable+0x34/0xe0 [566.243448] ice_free_vfs+0x2da/0x330 [ice] [566.244383] ice_sriov_configure+0x88/0xad0 [ice] [566.245353] sriov_numvfs_store+0xde/0x1d0 [566.246156] kernfs_fop_write_iter+0x15e/0x210 [566.246921] vfs_write+0x288/0x530 [566.247671] ksys_write+0x74/0xf0 [566.248408] do_syscall_64+0x58/0x80 [566.249145] entry_SYSCALL_64_after_hwframe+0x72/0xdc [566.249886] other info that might help us debug this: [566.252014] Possible unsafe locking scenario: [566.253432] CPU0 CPU1 [566.254118] ---- ---- [566.254800] lock(rtnl_mutex); [566.255514] lock(&adapter->crit_lock); [566.256233] lock(rtnl_mutex); [566.256897] lock(&adapter->crit_lock); [566.257388] *** DEADLOCK *** The deadlock can be triggered by a script that is continuously resetting the VF adapter while doing other operations requiring RTNL, e.g: while :; do ip link set $VF up ethtool --set-channels $VF combined 2 ip link set $VF down ip link set $VF up ethtool --set-channels $VF combined 4 ip link set $VF down done Any operation that triggers a reset can substitute "ethtool --set-channles" As a fix, add a new task "finish_config" that do all the work which needs rtnl lock. With the exception of iavf_remove(), all work that require rtnl should be called from this task. As for iavf_remove(), at the point where we need to call unregister_netdevice() (and grab rtnl_lock), we make sure the finish_config task is not running (cancel_work_sync()) to safely grab rtnl. Subsequent finish_config work cannot restart after that since the task is guarded by the __IAVF_IN_REMOVE_TASK bit in iavf_schedule_finish_config(). Fixes: 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-17Revert "iavf: Do not restart Tx queues after reset task failure"Marcin Szycik
This reverts commit 08f1c147b7265245d67321585c68a27e990e0c4b. Netdev is no longer being detached during reset, so this fix can be reverted. We leave the removal of "hacky" IFF_UP flag update. Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-17Revert "iavf: Detach device during reset task"Marcin Szycik
This reverts commit aa626da947e9cd30c4cf727493903e1adbb2c0a0. Detaching device during reset was not fully fixing the rtnl locking issue, as there could be a situation where callback was already in progress before detaching netdev. Furthermore, detaching netdevice causes TX timeouts if traffic is running. To reproduce: ip netns exec ns1 iperf3 -c $PEER_IP -t 600 --logfile /dev/null & while :; do for i in 200 7000 400 5000 300 3000 ; do ip netns exec ns1 ip link set $VF1 mtu $i sleep 2 done sleep 10 done Currently, callbacks such as iavf_change_mtu() wait for the reset. If the reset fails to acquire the rtnl_lock, they schedule the netdev update for later while continuing the reset flow. Operations like MTU changes are performed under the rtnl_lock. Therefore, when the operation finishes, another callback that uses rtnl_lock can start. Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-17iavf: Wait for reset in callbacks which trigger itMarcin Szycik
There was a fail when trying to add the interface to bonding right after changing the MTU on the interface. It was caused by bonding interface unable to open the interface due to interface being in __RESETTING state because of MTU change. Add new reset_waitqueue to indicate that reset has finished. Add waiting for reset to finish in callbacks which trigger hw reset: iavf_set_priv_flags(), iavf_change_mtu() and iavf_set_ringparam(). We use a 5000ms timeout period because on Hyper-V based systems, this operation takes around 3000-4000ms. In normal circumstances, it doesn't take more than 500ms to complete. Add a function iavf_wait_for_reset() to reuse waiting for reset code and use it also in iavf_set_channels(), which already waits for reset. We don't use error handling in iavf_set_channels() as this could cause the device to be in incorrect state if the reset was scheduled but hit timeout or the waitng function was interrupted by a signal. Fixes: 4e5e6b5d9d13 ("iavf: Fix return of set the new channel count") Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Co-developed-by: Dawid Wesierski <dawidx.wesierski@intel.com> Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com> Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-17iavf: use internal state to free traffic IRQsAhmed Zaki
If the system tries to close the netdev while iavf_reset_task() is running, __LINK_STATE_START will be cleared and netif_running() will return false in iavf_reinit_interrupt_scheme(). This will result in iavf_free_traffic_irqs() not being called and a leak as follows: [7632.489326] remove_proc_entry: removing non-empty directory 'irq/999', leaking at least 'iavf-enp24s0f0v0-TxRx-0' [7632.490214] WARNING: CPU: 0 PID: 10 at fs/proc/generic.c:718 remove_proc_entry+0x19b/0x1b0 is shown when pci_disable_msix() is later called. Fix by using the internal adapter state. The traffic IRQs will always exist if state == __IAVF_RUNNING. Fixes: 5b36e8d04b44 ("i40evf: Enable VF to request an alternate queue allocation") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-17iavf: Fix out-of-bounds when setting channels on removeDing Hui
If we set channels greater during iavf_remove(), and waiting reset done would be timeout, then returned with error but changed num_active_queues directly, that will lead to OOB like the following logs. Because the num_active_queues is greater than tx/rx_rings[] allocated actually. Reproducer: [root@host ~]# cat repro.sh #!/bin/bash pf_dbsf="0000:41:00.0" vf0_dbsf="0000:41:02.0" g_pids=() function do_set_numvf() { echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) } function do_set_channel() { local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/) [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; } ifconfig $nic 192.168.18.5 netmask 255.255.255.0 ifconfig $nic up ethtool -L $nic combined 1 ethtool -L $nic combined 4 sleep $((RANDOM%3)) } function on_exit() { local pid for pid in "${g_pids[@]}"; do kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null done g_pids=() } trap "on_exit; exit" EXIT while :; do do_set_numvf ; done & g_pids+=($!) while :; do do_set_channel ; done & g_pids+=($!) wait Result: [ 3506.152887] iavf 0000:41:02.0: Removing device [ 3510.400799] ================================================================== [ 3510.400820] BUG: KASAN: slab-out-of-bounds in iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400823] Read of size 8 at addr ffff88b6f9311008 by task repro.sh/55536 [ 3510.400823] [ 3510.400830] CPU: 101 PID: 55536 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [ 3510.400832] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021 [ 3510.400835] Call Trace: [ 3510.400851] dump_stack+0x71/0xab [ 3510.400860] print_address_description+0x6b/0x290 [ 3510.400865] ? iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400868] kasan_report+0x14a/0x2b0 [ 3510.400873] iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400880] iavf_remove+0x2b6/0xc70 [iavf] [ 3510.400884] ? iavf_free_all_rx_resources+0x160/0x160 [iavf] [ 3510.400891] ? wait_woken+0x1d0/0x1d0 [ 3510.400895] ? notifier_call_chain+0xc1/0x130 [ 3510.400903] pci_device_remove+0xa8/0x1f0 [ 3510.400910] device_release_driver_internal+0x1c6/0x460 [ 3510.400916] pci_stop_bus_device+0x101/0x150 [ 3510.400919] pci_stop_and_remove_bus_device+0xe/0x20 [ 3510.400924] pci_iov_remove_virtfn+0x187/0x420 [ 3510.400927] ? pci_iov_add_virtfn+0xe10/0xe10 [ 3510.400929] ? pci_get_subsys+0x90/0x90 [ 3510.400932] sriov_disable+0xed/0x3e0 [ 3510.400936] ? bus_find_device+0x12d/0x1a0 [ 3510.400953] i40e_free_vfs+0x754/0x1210 [i40e] [ 3510.400966] ? i40e_reset_all_vfs+0x880/0x880 [i40e] [ 3510.400968] ? pci_get_device+0x7c/0x90 [ 3510.400970] ? pci_get_subsys+0x90/0x90 [ 3510.400982] ? pci_vfs_assigned.part.7+0x144/0x210 [ 3510.400987] ? __mutex_lock_slowpath+0x10/0x10 [ 3510.400996] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 3510.401001] sriov_numvfs_store+0x214/0x290 [ 3510.401005] ? sriov_totalvfs_show+0x30/0x30 [ 3510.401007] ? __mutex_lock_slowpath+0x10/0x10 [ 3510.401011] ? __check_object_size+0x15a/0x350 [ 3510.401018] kernfs_fop_write+0x280/0x3f0 [ 3510.401022] vfs_write+0x145/0x440 [ 3510.401025] ksys_write+0xab/0x160 [ 3510.401028] ? __ia32_sys_read+0xb0/0xb0 [ 3510.401031] ? fput_many+0x1a/0x120 [ 3510.401032] ? filp_close+0xf0/0x130 [ 3510.401038] do_syscall_64+0xa0/0x370 [ 3510.401041] ? page_fault+0x8/0x30 [ 3510.401043] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 3510.401073] RIP: 0033:0x7f3a9bb842c0 [ 3510.401079] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24 [ 3510.401080] RSP: 002b:00007ffc05f1fe18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 3510.401083] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f3a9bb842c0 [ 3510.401085] RDX: 0000000000000002 RSI: 0000000002327408 RDI: 0000000000000001 [ 3510.401086] RBP: 0000000002327408 R08: 00007f3a9be53780 R09: 00007f3a9c8a4700 [ 3510.401086] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002 [ 3510.401087] R13: 0000000000000001 R14: 00007f3a9be52620 R15: 0000000000000001 [ 3510.401090] [ 3510.401093] Allocated by task 76795: [ 3510.401098] kasan_kmalloc+0xa6/0xd0 [ 3510.401099] __kmalloc+0xfb/0x200 [ 3510.401104] iavf_init_interrupt_scheme+0x26f/0x1310 [iavf] [ 3510.401108] iavf_watchdog_task+0x1d58/0x4050 [iavf] [ 3510.401114] process_one_work+0x56a/0x11f0 [ 3510.401115] worker_thread+0x8f/0xf40 [ 3510.401117] kthread+0x2a0/0x390 [ 3510.401119] ret_from_fork+0x1f/0x40 [ 3510.401122] 0xffffffffffffffff [ 3510.401123] In timeout handling, we should keep the original num_active_queues and reset num_req_queues to 0. Fixes: 4e5e6b5d9d13 ("iavf: Fix return of set the new channel count") Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Cc: Donglin Peng <pengdonglin@sangfor.com.cn> Cc: Huang Cun <huangcun@sangfor.com.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-17iavf: Fix use-after-free in free_netdevDing Hui
We do netif_napi_add() for all allocated q_vectors[], but potentially do netif_napi_del() for part of them, then kfree q_vectors and leave invalid pointers at dev->napi_list. Reproducer: [root@host ~]# cat repro.sh #!/bin/bash pf_dbsf="0000:41:00.0" vf0_dbsf="0000:41:02.0" g_pids=() function do_set_numvf() { echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) } function do_set_channel() { local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/) [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; } ifconfig $nic 192.168.18.5 netmask 255.255.255.0 ifconfig $nic up ethtool -L $nic combined 1 ethtool -L $nic combined 4 sleep $((RANDOM%3)) } function on_exit() { local pid for pid in "${g_pids[@]}"; do kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null done g_pids=() } trap "on_exit; exit" EXIT while :; do do_set_numvf ; done & g_pids+=($!) while :; do do_set_channel ; done & g_pids+=($!) wait Result: [ 4093.900222] ================================================================== [ 4093.900230] BUG: KASAN: use-after-free in free_netdev+0x308/0x390 [ 4093.900232] Read of size 8 at addr ffff88b4dc145640 by task repro.sh/6699 [ 4093.900233] [ 4093.900236] CPU: 10 PID: 6699 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [ 4093.900238] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021 [ 4093.900239] Call Trace: [ 4093.900244] dump_stack+0x71/0xab [ 4093.900249] print_address_description+0x6b/0x290 [ 4093.900251] ? free_netdev+0x308/0x390 [ 4093.900252] kasan_report+0x14a/0x2b0 [ 4093.900254] free_netdev+0x308/0x390 [ 4093.900261] iavf_remove+0x825/0xd20 [iavf] [ 4093.900265] pci_device_remove+0xa8/0x1f0 [ 4093.900268] device_release_driver_internal+0x1c6/0x460 [ 4093.900271] pci_stop_bus_device+0x101/0x150 [ 4093.900273] pci_stop_and_remove_bus_device+0xe/0x20 [ 4093.900275] pci_iov_remove_virtfn+0x187/0x420 [ 4093.900277] ? pci_iov_add_virtfn+0xe10/0xe10 [ 4093.900278] ? pci_get_subsys+0x90/0x90 [ 4093.900280] sriov_disable+0xed/0x3e0 [ 4093.900282] ? bus_find_device+0x12d/0x1a0 [ 4093.900290] i40e_free_vfs+0x754/0x1210 [i40e] [ 4093.900298] ? i40e_reset_all_vfs+0x880/0x880 [i40e] [ 4093.900299] ? pci_get_device+0x7c/0x90 [ 4093.900300] ? pci_get_subsys+0x90/0x90 [ 4093.900306] ? pci_vfs_assigned.part.7+0x144/0x210 [ 4093.900309] ? __mutex_lock_slowpath+0x10/0x10 [ 4093.900315] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 4093.900318] sriov_numvfs_store+0x214/0x290 [ 4093.900320] ? sriov_totalvfs_show+0x30/0x30 [ 4093.900321] ? __mutex_lock_slowpath+0x10/0x10 [ 4093.900323] ? __check_object_size+0x15a/0x350 [ 4093.900326] kernfs_fop_write+0x280/0x3f0 [ 4093.900329] vfs_write+0x145/0x440 [ 4093.900330] ksys_write+0xab/0x160 [ 4093.900332] ? __ia32_sys_read+0xb0/0xb0 [ 4093.900334] ? fput_many+0x1a/0x120 [ 4093.900335] ? filp_close+0xf0/0x130 [ 4093.900338] do_syscall_64+0xa0/0x370 [ 4093.900339] ? page_fault+0x8/0x30 [ 4093.900341] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 4093.900357] RIP: 0033:0x7f16ad4d22c0 [ 4093.900359] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24 [ 4093.900360] RSP: 002b:00007ffd6491b7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 4093.900362] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f16ad4d22c0 [ 4093.900363] RDX: 0000000000000002 RSI: 0000000001a41408 RDI: 0000000000000001 [ 4093.900364] RBP: 0000000001a41408 R08: 00007f16ad7a1780 R09: 00007f16ae1f2700 [ 4093.900364] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002 [ 4093.900365] R13: 0000000000000001 R14: 00007f16ad7a0620 R15: 0000000000000001 [ 4093.900367] [ 4093.900368] Allocated by task 820: [ 4093.900371] kasan_kmalloc+0xa6/0xd0 [ 4093.900373] __kmalloc+0xfb/0x200 [ 4093.900376] iavf_init_interrupt_scheme+0x63b/0x1320 [iavf] [ 4093.900380] iavf_watchdog_task+0x3d51/0x52c0 [iavf] [ 4093.900382] process_one_work+0x56a/0x11f0 [ 4093.900383] worker_thread+0x8f/0xf40 [ 4093.900384] kthread+0x2a0/0x390 [ 4093.900385] ret_from_fork+0x1f/0x40 [ 4093.900387] 0xffffffffffffffff [ 4093.900387] [ 4093.900388] Freed by task 6699: [ 4093.900390] __kasan_slab_free+0x137/0x190 [ 4093.900391] kfree+0x8b/0x1b0 [ 4093.900394] iavf_free_q_vectors+0x11d/0x1a0 [iavf] [ 4093.900397] iavf_remove+0x35a/0xd20 [iavf] [ 4093.900399] pci_device_remove+0xa8/0x1f0 [ 4093.900400] device_release_driver_internal+0x1c6/0x460 [ 4093.900401] pci_stop_bus_device+0x101/0x150 [ 4093.900402] pci_stop_and_remove_bus_device+0xe/0x20 [ 4093.900403] pci_iov_remove_virtfn+0x187/0x420 [ 4093.900404] sriov_disable+0xed/0x3e0 [ 4093.900409] i40e_free_vfs+0x754/0x1210 [i40e] [ 4093.900415] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 4093.900416] sriov_numvfs_store+0x214/0x290 [ 4093.900417] kernfs_fop_write+0x280/0x3f0 [ 4093.900418] vfs_write+0x145/0x440 [ 4093.900419] ksys_write+0xab/0x160 [ 4093.900420] do_syscall_64+0xa0/0x370 [ 4093.900421] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 4093.900422] 0xffffffffffffffff [ 4093.900422] [ 4093.900424] The buggy address belongs to the object at ffff88b4dc144200 which belongs to the cache kmalloc-8k of size 8192 [ 4093.900425] The buggy address is located 5184 bytes inside of 8192-byte region [ffff88b4dc144200, ffff88b4dc146200) [ 4093.900425] The buggy address belongs to the page: [ 4093.900427] page:ffffea00d3705000 refcount:1 mapcount:0 mapping:ffff88bf04415c80 index:0x0 compound_mapcount: 0 [ 4093.900430] flags: 0x10000000008100(slab|head) [ 4093.900433] raw: 0010000000008100 dead000000000100 dead000000000200 ffff88bf04415c80 [ 4093.900434] raw: 0000000000000000 0000000000030003 00000001ffffffff 0000000000000000 [ 4093.900434] page dumped because: kasan: bad access detected [ 4093.900435] [ 4093.900435] Memory state around the buggy address: [ 4093.900436] ffff88b4dc145500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900437] ffff88b4dc145580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900438] >ffff88b4dc145600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900438] ^ [ 4093.900439] ffff88b4dc145680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900440] ffff88b4dc145700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900440] ================================================================== Although the patch #2 (of 2) can avoid the issue triggered by this repro.sh, there still are other potential risks that if num_active_queues is changed to less than allocated q_vectors[] by unexpected, the mismatched netif_napi_add/del() can also cause UAF. Since we actually call netif_napi_add() for all allocated q_vectors unconditionally in iavf_alloc_q_vectors(), so we should fix it by letting netif_napi_del() match to netif_napi_add(). Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Cc: Donglin Peng <pengdonglin@sangfor.com.cn> Cc: Huang Cun <huangcun@sangfor.com.cn> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-17r8169: fix ASPM-related problem for chip version 42 and 43Heiner Kallweit
Referenced commit missed that for chip versions 42 and 43 ASPM remained disabled in the respective rtl_hw_start_...() routines. This resulted in problems as described in the referenced bug ticket. Therefore re-instantiate the previous logic. Fixes: 5fc3f6c90cca ("r8169: consolidate disabling ASPM before EPHY access") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217635 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-14ice: prevent NULL pointer deref during reloadMichal Swiatkowski
Calling ethtool during reload can lead to call trace, because VSI isn't configured for some time, but netdev is alive. To fix it add rtnl lock for VSI deconfig and config. Set ::num_q_vectors to 0 after freeing and add a check for ::tx/rx_rings in ring related ethtool ops. Add proper unroll of filters in ice_start_eth(). Reproduction: $watch -n 0.1 -d 'ethtool -g enp24s0f0np0' $devlink dev reload pci/0000:18:00.0 action driver_reinit Call trace before fix: [66303.926205] BUG: kernel NULL pointer dereference, address: 0000000000000000 [66303.926259] #PF: supervisor read access in kernel mode [66303.926286] #PF: error_code(0x0000) - not-present page [66303.926311] PGD 0 P4D 0 [66303.926332] Oops: 0000 [#1] PREEMPT SMP PTI [66303.926358] CPU: 4 PID: 933821 Comm: ethtool Kdump: loaded Tainted: G OE 6.4.0-rc5+ #1 [66303.926400] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018 [66303.926446] RIP: 0010:ice_get_ringparam+0x22/0x50 [ice] [66303.926649] Code: 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 87 c0 09 00 00 c7 46 04 e0 1f 00 00 c7 46 10 e0 1f 00 00 48 8b 50 20 <48> 8b 12 0f b7 52 3a 89 56 14 48 8b 40 28 48 8b 00 0f b7 40 58 48 [66303.926722] RSP: 0018:ffffad40472f39c8 EFLAGS: 00010246 [66303.926749] RAX: ffff98a8ada05828 RBX: ffff98a8c46dd060 RCX: ffffad40472f3b48 [66303.926781] RDX: 0000000000000000 RSI: ffff98a8c46dd068 RDI: ffff98a8b23c4000 [66303.926811] RBP: ffffad40472f3b48 R08: 00000000000337b0 R09: 0000000000000000 [66303.926843] R10: 0000000000000001 R11: 0000000000000100 R12: ffff98a8b23c4000 [66303.926874] R13: ffff98a8c46dd060 R14: 000000000000000f R15: ffffad40472f3a50 [66303.926906] FS: 00007f6397966740(0000) GS:ffff98b390900000(0000) knlGS:0000000000000000 [66303.926941] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66303.926967] CR2: 0000000000000000 CR3: 000000011ac20002 CR4: 00000000007706e0 [66303.926999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [66303.927029] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [66303.927060] PKRU: 55555554 [66303.927075] Call Trace: [66303.927094] <TASK> [66303.927111] ? __die+0x23/0x70 [66303.927140] ? page_fault_oops+0x171/0x4e0 [66303.927176] ? exc_page_fault+0x7f/0x180 [66303.927209] ? asm_exc_page_fault+0x26/0x30 [66303.927244] ? ice_get_ringparam+0x22/0x50 [ice] [66303.927433] rings_prepare_data+0x62/0x80 [66303.927469] ethnl_default_doit+0xe2/0x350 [66303.927501] genl_family_rcv_msg_doit.isra.0+0xe3/0x140 [66303.927538] genl_rcv_msg+0x1b1/0x2c0 [66303.927561] ? __pfx_ethnl_default_doit+0x10/0x10 [66303.927590] ? __pfx_genl_rcv_msg+0x10/0x10 [66303.927615] netlink_rcv_skb+0x58/0x110 [66303.927644] genl_rcv+0x28/0x40 [66303.927665] netlink_unicast+0x19e/0x290 [66303.927691] netlink_sendmsg+0x254/0x4d0 [66303.927717] sock_sendmsg+0x93/0xa0 [66303.927743] __sys_sendto+0x126/0x170 [66303.927780] __x64_sys_sendto+0x24/0x30 [66303.928593] do_syscall_64+0x5d/0x90 [66303.929370] ? __count_memcg_events+0x60/0xa0 [66303.930146] ? count_memcg_events.constprop.0+0x1a/0x30 [66303.930920] ? handle_mm_fault+0x9e/0x350 [66303.931688] ? do_user_addr_fault+0x258/0x740 [66303.932452] ? exc_page_fault+0x7f/0x180 [66303.933193] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fixes: 5b246e533d01 ("ice: split probe into smaller functions") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-14ice: Unregister netdev and devlink_port only oncePetr Oros
Since commit 6624e780a577fc ("ice: split ice_vsi_setup into smaller functions") ice_vsi_release does things twice. There is unregister netdev which is unregistered in ice_deinit_eth also. It also unregisters the devlink_port twice which is also unregistered in ice_deinit_eth(). This double deregistration is hidden because devl_port_unregister ignores the return value of xa_erase. [ 68.642167] Call Trace: [ 68.650385] ice_devlink_destroy_pf_port+0xe/0x20 [ice] [ 68.655656] ice_vsi_release+0x445/0x690 [ice] [ 68.660147] ice_deinit+0x99/0x280 [ice] [ 68.664117] ice_remove+0x1b6/0x5c0 [ice] [ 171.103841] Call Trace: [ 171.109607] ice_devlink_destroy_pf_port+0xf/0x20 [ice] [ 171.114841] ice_remove+0x158/0x270 [ice] [ 171.118854] pci_device_remove+0x3b/0xc0 [ 171.122779] device_release_driver_internal+0xc7/0x170 [ 171.127912] driver_detach+0x54/0x8c [ 171.131491] bus_remove_driver+0x77/0xd1 [ 171.135406] pci_unregister_driver+0x2d/0xb0 [ 171.139670] ice_module_exit+0xc/0x55f [ice] Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-14net: ethernet: Remove repeating expressionWang Ming
Identify issues that arise by using the tests/doublebitand.cocci semantic patch. Need to remove duplicate expression in if statement. Signed-off-by: Wang Ming <machel@vivo.com> Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-14bna: Remove error checking for debugfs_create_dir()Wang Ming
It is expected that most callers should _ignore_ the errors return by debugfs_create_dir() in bnad_debugfs_init(). Signed-off-by: Wang Ming <machel@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-14net: ethernet: mtk_eth_soc: handle probe deferralDaniel Golle
Move the call to of_get_ethdev_address to mtk_add_mac which is part of the probe function and can hence itself return -EPROBE_DEFER should of_get_ethdev_address return -EPROBE_DEFER. This allows us to entirely get rid of the mtk_init function. The problem of of_get_ethdev_address returning -EPROBE_DEFER surfaced in situations in which the NVMEM provider holding the MAC address has not yet be loaded at the time mtk_eth_soc is initially probed. In this case probing of mtk_eth_soc should be deferred instead of falling back to use a random MAC address, so once the NVMEM provider becomes available probing can be repeated. Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-14net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field()/cpsw_ale_set_field()Tanmay Patil
CPSW ALE has 75 bit ALE entries which are stored within three 32 bit words. The cpsw_ale_get_field() and cpsw_ale_set_field() functions assume that the field will be strictly contained within one word. However, this is not guaranteed to be the case and it is possible for ALE field entries to span across up to two words at the most. Fix the methods to handle getting/setting fields spanning up to two words. Fixes: db82173f23c5 ("netdev: driver: ethernet: add cpsw address lookup engine support") Signed-off-by: Tanmay Patil <t-patil@ti.com> [s-vadapalli@ti.com: rephrased commit message and added Fixes tag] Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-12net: txgbe: fix eeprom calculation errorJiawen Wu
For some device types like TXGBE_ID_XAUI, *checksum computed in txgbe_calc_eeprom_checksum() is larger than TXGBE_EEPROM_SUM. Remove the limit on the size of *checksum. Fixes: 049fe5365324 ("net: txgbe: Add operations to interact with firmware") Fixes: 5e2ea7801fac ("net: txgbe: Fix unsigned comparison to zero in txgbe_calc_eeprom_checksum()") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://lore.kernel.org/r/20230711063414.3311-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-12net: ena: fix shift-out-of-bounds in exponential backoffKrister Johansen
The ENA adapters on our instances occasionally reset. Once recently logged a UBSAN failure to console in the process: UBSAN: shift-out-of-bounds in build/linux/drivers/net/ethernet/amazon/ena/ena_com.c:540:13 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 28 PID: 70012 Comm: kworker/u72:2 Kdump: loaded not tainted 5.15.117 Hardware name: Amazon EC2 c5d.9xlarge/, BIOS 1.0 10/16/2017 Workqueue: ena ena_fw_reset_device [ena] Call Trace: <TASK> dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e ? __const_udelay+0x43/0x50 ena_delay_exponential_backoff_us.cold+0x16/0x1e [ena] wait_for_reset_state+0x54/0xa0 [ena] ena_com_dev_reset+0xc8/0x110 [ena] ena_down+0x3fe/0x480 [ena] ena_destroy_device+0xeb/0xf0 [ena] ena_fw_reset_device+0x30/0x50 [ena] process_one_work+0x22b/0x3d0 worker_thread+0x4d/0x3f0 ? process_one_work+0x3d0/0x3d0 kthread+0x12a/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> Apparently, the reset delays are getting so large they can trigger a UBSAN panic. Looking at the code, the current timeout is capped at 5000us. Using a base value of 100us, the current code will overflow after (1<<29). Even at values before 32, this function wraps around, perhaps unintentionally. Cap the value of the exponent used for this backoff at (1<<16) which is larger than currently necessary, but large enough to support bigger values in the future. Cc: stable@vger.kernel.org Fixes: 4bb7f4cf60e3 ("net: ena: reduce driver load time") Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/r/20230711013621.GE1926@templeofstupid.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-12Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== igc: Fix corner cases for TSN offload Florian Kauer says: The igc driver supports several different offloading capabilities relevant in the TSN context. Recent patches in this area introduced regressions for certain corner cases that are fixed in this series. Each of the patches (except the first one) addresses a different regression that can be separately reproduced. Still, they have overlapping code changes so they should not be separately applied. Especially #4 and #6 address the same observation, but both need to be applied to avoid TX hang occurrences in the scenario described in the patches. ==================== Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-11octeontx2-pf: Add additional check for MCAM rulesSuman Ghosh
Due to hardware limitation, MCAM drop rule with ether_type == 802.1Q and vlan_id == 0 is not supported. Hence rejecting such rules. Fixes: dce677da57c0 ("octeontx2-pf: Add vlan-etype to ntuple filters") Signed-off-by: Suman Ghosh <sumang@marvell.com> Link: https://lore.kernel.org/r/20230710103027.2244139-1-sumang@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11net: fec: use netdev_err_once() instead of netdev_err()Wei Fang
In the case of heavy XDP traffic to be transmitted, the console will print the error log continuously if there are lack of enough BDs to accommodate the frames. The log looks like below. [ 160.013112] fec 30be0000.ethernet eth0: NOT enough BD for SG! [ 160.023116] fec 30be0000.ethernet eth0: NOT enough BD for SG! [ 160.028926] fec 30be0000.ethernet eth0: NOT enough BD for SG! [ 160.038946] fec 30be0000.ethernet eth0: NOT enough BD for SG! [ 160.044758] fec 30be0000.ethernet eth0: NOT enough BD for SG! Not only will this log be replicated and redundant, it will also degrade XDP performance. So we use netdev_err_once() instead of netdev_err() now. Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support") Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11net: fec: increase the size of tx ring and update tx_wake_thresholdWei Fang
When the XDP feature is enabled and with heavy XDP frames to be transmitted, there is a considerable probability that available tx BDs are insufficient. This will lead to some XDP frames to be discarded and the "NOT enough BD for SG!" error log will appear in the console (as shown below). [ 160.013112] fec 30be0000.ethernet eth0: NOT enough BD for SG! [ 160.023116] fec 30be0000.ethernet eth0: NOT enough BD for SG! [ 160.028926] fec 30be0000.ethernet eth0: NOT enough BD for SG! [ 160.038946] fec 30be0000.ethernet eth0: NOT enough BD for SG! [ 160.044758] fec 30be0000.ethernet eth0: NOT enough BD for SG! In the case of heavy XDP traffic, sometimes the speed of recycling tx BDs may be slower than the speed of sending XDP frames. There may be several specific reasons, such as the interrupt is not responsed in time, the efficiency of the NAPI callback function is too low due to all the queues (tx queues and rx queues) share the same NAPI, and so on. After trying various methods, I think that increase the size of tx BD ring is simple and effective. Maybe the best resolution is that allocate NAPI for each queue to improve the efficiency of the NAPI callback, but this change is a bit big and I didn't try this method. Perheps this method will be implemented in a future patch. This patch also updates the tx_wake_threshold of tx ring which is related to the size of tx ring in the previous logic. Otherwise, the tx_wake_threshold will be too high (403 BDs), which is more likely to impact the slow path in the case of heavy XDP traffic, because XDP path and slow path share the tx BD rings. According to Jakub's suggestion, the tx_wake_threshold is at least equal to tx_stop_threshold + 2 * MAX_SKB_FRAGS, if a queue of hundreds of entries is overflowing, we should be able to apply a hysteresis of a few tens of entries. Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support") Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11net: fec: recycle pages for transmitted XDP framesWei Fang
Once the XDP frames have been successfully transmitted through the ndo_xdp_xmit() interface, it's the driver responsibility to free the frames so that the page_pool can recycle the pages and reuse them. However, this action is not implemented in the fec driver. This leads to a user-visible problem that the console will print the following warning log. [ 157.568851] page_pool_release_retry() stalled pool shutdown 1389 inflight 60 sec [ 217.983446] page_pool_release_retry() stalled pool shutdown 1389 inflight 120 sec [ 278.399006] page_pool_release_retry() stalled pool shutdown 1389 inflight 181 sec [ 338.812885] page_pool_release_retry() stalled pool shutdown 1389 inflight 241 sec [ 399.226946] page_pool_release_retry() stalled pool shutdown 1389 inflight 302 sec Therefore, to solve this issue, we free XDP frames via xdp_return_frame() while cleaning the tx BD ring. Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support") Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11net: fec: dynamically set the NETDEV_XDP_ACT_NDO_XMIT feature of XDPWei Fang
When a XDP program is installed or uninstalled, fec_restart() will be invoked to reset MAC and buffer descriptor rings. It's reasonable not to transmit any packet during the process of reset. However, the NETDEV_XDP_ACT_NDO_XMIT bit of xdp_features is enabled by default, that is to say, it's possible that the fec_enet_xdp_xmit() will be invoked even if the process of reset is not finished. In this case, the redirected XDP frames might be dropped and available transmit BDs may be incorrectly deemed insufficient. So this patch disable the NETDEV_XDP_ACT_NDO_XMIT feature by default and dynamically configure this feature when the bpf program is installed or uninstalled. Fixes: e4ac7cc6e5a4 ("net: fec: turn on XDP features") Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-10igc: Fix inserting of empty frame for launchtimeFlorian Kauer
The insertion of an empty frame was introduced with commit db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") in order to ensure that the current cycle has at least one packet if there is some packet to be scheduled for the next cycle. However, the current implementation does not properly check if a packet is already scheduled for the current cycle. Currently, an empty packet is always inserted if and only if txtime >= end_of_cycle && txtime > last_tx_cycle but since last_tx_cycle is always either the end of the current cycle (end_of_cycle) or the end of a previous cycle, the second part (txtime > last_tx_cycle) is always true unless txtime == last_tx_cycle. What actually needs to be checked here is if the last_tx_cycle was already written within the current cycle, so an empty frame should only be inserted if and only if txtime >= end_of_cycle && end_of_cycle > last_tx_cycle. This patch does not only avoid an unnecessary insertion, but it can actually be harmful to insert an empty packet if packets are already scheduled in the current cycle, because it can lead to a situation where the empty packet is actually processed as the first packet in the upcoming cycle shifting the packet with the first_flag even one cycle into the future, finally leading to a TX hang. The TX hang can be reproduced on a i225 with: sudo tc qdisc replace dev enp1s0 parent root handle 100 taprio \ num_tc 1 \ map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 \ base-time 0 \ sched-entry S 01 300000 \ flags 0x1 \ txtime-delay 500000 \ clockid CLOCK_TAI sudo tc qdisc replace dev enp1s0 parent 100:1 etf \ clockid CLOCK_TAI \ delta 500000 \ offload \ skip_sock_check and traffic generator sudo trafgen -i traffic.cfg -o enp1s0 --cpp -n0 -q -t1400ns with traffic.cfg #define ETH_P_IP 0x0800 { /* Ethernet Header */ 0x30, 0x1f, 0x9a, 0xd0, 0xf0, 0x0e, # MAC Dest - adapt as needed 0x24, 0x5e, 0xbe, 0x57, 0x2e, 0x36, # MAC Src - adapt as needed const16(ETH_P_IP), /* IPv4 Header */ 0b01000101, 0, # IPv4 version, IHL, TOS const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header)) const16(2), # IPv4 ident 0b01000000, 0, # IPv4 flags, fragmentation off 64, # IPv4 TTL 17, # Protocol UDP csumip(14, 33), # IPv4 checksum /* UDP Header */ 10, 0, 48, 1, # IP Src - adapt as needed 10, 0, 48, 10, # IP Dest - adapt as needed const16(5555), # UDP Src Port const16(6666), # UDP Dest Port const16(1008), # UDP length (UDP header 8 bytes + payload length) csumudp(14, 34), # UDP checksum /* Payload */ fill('W', 1000), } and the observed message with that is for example igc 0000:01:00.0 enp1s0: Detected Tx Unit Hang Tx Queue <0> TDH <32> TDT <3c> next_to_use <3c> next_to_clean <32> buffer_info[next_to_clean] time_stamp <ffff26a8> next_to_watch <00000000632a1828> jiffies <ffff27f8> desc.status <1048000> Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-10igc: Fix launchtime before start of cycleFlorian Kauer
It is possible (verified on a running system) that frames are processed by igc_tx_launchtime with a txtime before the start of the cycle (baset_est). However, the result of txtime - baset_est is written into a u32, leading to a wrap around to a positive number. The following launchtime > 0 check will only branch to executing launchtime = 0 if launchtime is already 0. Fix it by using a s32 before checking launchtime > 0. Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-10igc: No strict mode in pure launchtime/CBS offloadFlorian Kauer
The flags IGC_TXQCTL_STRICT_CYCLE and IGC_TXQCTL_STRICT_END prevent the packet transmission over slot and cycle boundaries. This is important for taprio offload where the slots and cycles correspond to the slots and cycles configured for the network. However, the Qbv offload feature of the i225 is also used for enabling TX launchtime / ETF offload. In that case, however, the cycle has no meaning for the network and is only used internally to adapt the base time register after a second has passed. Enabling strict mode in this case would unnecessarily prevent the transmission of certain packets (i.e. at the boundary of a second) and thus interferes with the ETF qdisc that promises transmission at a certain point in time. Similar to ETF, this also applies to CBS offload that also should not be influenced by strict mode unless taprio offload would be enabled at the same time. This fully reverts commit d8f45be01dd9 ("igc: Use strict cycles for Qbv scheduling") but its commit message only describes what was already implemented before that commit. The difference to a plain revert of that commit is that it now copes with the base_time = 0 case that was fixed with commit e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv") In particular, enabling strict mode leads to TX hang situations under high traffic if taprio is applied WITHOUT taprio offload but WITH ETF offload, e.g. as in sudo tc qdisc replace dev enp1s0 parent root handle 100 taprio \ num_tc 1 \ map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 \ base-time 0 \ sched-entry S 01 300000 \ flags 0x1 \ txtime-delay 500000 \ clockid CLOCK_TAI sudo tc qdisc replace dev enp1s0 parent 100:1 etf \ clockid CLOCK_TAI \ delta 500000 \ offload \ skip_sock_check and traffic generator sudo trafgen -i traffic.cfg -o enp1s0 --cpp -n0 -q -t1400ns with traffic.cfg #define ETH_P_IP 0x0800 { /* Ethernet Header */ 0x30, 0x1f, 0x9a, 0xd0, 0xf0, 0x0e, # MAC Dest - adapt as needed 0x24, 0x5e, 0xbe, 0x57, 0x2e, 0x36, # MAC Src - adapt as needed const16(ETH_P_IP), /* IPv4 Header */ 0b01000101, 0, # IPv4 version, IHL, TOS const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header)) const16(2), # IPv4 ident 0b01000000, 0, # IPv4 flags, fragmentation off 64, # IPv4 TTL 17, # Protocol UDP csumip(14, 33), # IPv4 checksum /* UDP Header */ 10, 0, 48, 1, # IP Src - adapt as needed 10, 0, 48, 10, # IP Dest - adapt as needed const16(5555), # UDP Src Port const16(6666), # UDP Dest Port const16(1008), # UDP length (UDP header 8 bytes + payload length) csumudp(14, 34), # UDP checksum /* Payload */ fill('W', 1000), } and the observed message with that is for example igc 0000:01:00.0 enp1s0: Detected Tx Unit Hang Tx Queue <0> TDH <d0> TDT <f0> next_to_use <f0> next_to_clean <d0> buffer_info[next_to_clean] time_stamp <ffff661f> next_to_watch <00000000245a4efb> jiffies <ffff6e48> desc.status <1048000> Fixes: d8f45be01dd9 ("igc: Use strict cycles for Qbv scheduling") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-10igc: Handle already enabled taprio offload for basetime 0Florian Kauer
Since commit e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv") it is possible to enable taprio offload with a basetime of 0. However, the check if taprio offload is already enabled (and thus -EALREADY should be returned for igc_save_qbv_schedule) still relied on adapter->base_time > 0. This can be reproduced as follows: # TAPRIO offload (flags == 0x2) and base-time = 0 sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \ num_tc 1 \ map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 \ base-time 0 \ sched-entry S 01 300000 \ flags 0x2 # The second call should fail with "Error: Device failed to setup taprio offload." # But that only happens if base-time was != 0 sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \ num_tc 1 \ map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 \ base-time 0 \ sched-entry S 01 300000 \ flags 0x2 Fixes: e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-10igc: Do not enable taprio offload for invalid argumentsFlorian Kauer
Only set adapter->taprio_offload_enable after validating the arguments. Otherwise, it stays set even if the offload was not enabled. Since the subsequent code does not get executed in case of invalid arguments, it will not be read at first. However, by activating and then deactivating another offload (e.g. ETF/TX launchtime offload), taprio_offload_enable is read and erroneously keeps the offload feature of the NIC enabled. This can be reproduced as follows: # TAPRIO offload (flags == 0x2) and negative base-time leading to expected -ERANGE sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \ num_tc 1 \ map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 \ base-time -1000 \ sched-entry S 01 300000 \ flags 0x2 # IGC_TQAVCTRL is 0x0 as expected (iomem=relaxed for reading register) sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1 # Activate ETF offload sudo tc qdisc replace dev enp1s0 parent root handle 6666 mqprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ hw 0 sudo tc qdisc add dev enp1s0 parent 6666:1 etf \ clockid CLOCK_TAI \ delta 500000 \ offload # IGC_TQAVCTRL is 0x9 as expected sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1 # Deactivate ETF offload again sudo tc qdisc delete dev enp1s0 parent 6666:1 # IGC_TQAVCTRL should now be 0x0 again, but is observed as 0x9 sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1 Fixes: e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-10igc: Rename qbv_enable to taprio_offload_enableFlorian Kauer
In the current implementation the flags adapter->qbv_enable and IGC_FLAG_TSN_QBV_ENABLED have a similar name, but do not have the same meaning. The first one is used only to indicate taprio offload (i.e. when igc_save_qbv_schedule was called), while the second one corresponds to the Qbv mode of the hardware. However, the second one is also used to support the TX launchtime feature, i.e. ETF qdisc offload. This leads to situations where adapter->qbv_enable is false, but the flag IGC_FLAG_TSN_QBV_ENABLED is set. This is prone to confusion. The rename should reduce this confusion. Since it is a pure rename, it has no impact on functionality. Fixes: e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-10gve: unify driver name usageJunfeng Guo
Current codebase contained the usage of two different names for this driver (i.e., `gvnic` and `gve`), which is quite unfriendly for users to use, especially when trying to bind or unbind the driver manually. The corresponding kernel module is registered with the name of `gve`. It's more reasonable to align the name of the driver with the module. Fixes: 893ce44df565 ("gve: Add basic driver framework for Compute Engine Virtual NIC") Cc: csully@google.com Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-09net: lan743x: select FIXED_PHYSimon Horman
The blamed commit introduces usage of fixed_phy_register() but not a corresponding dependency on FIXED_PHY. This can result in a build failure. s390-linux-ld: drivers/net/ethernet/microchip/lan743x_main.o: in function `lan743x_phy_open': drivers/net/ethernet/microchip/lan743x_main.c:1514: undefined reference to `fixed_phy_register' Fixes: 624864fbff92 ("net: lan743x: add fixed phy support for LAN7431 device") Cc: stable@vger.kernel.org Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/netdev/725bf1c5-b252-7d19-7582-a6809716c7d6@infradead.org/ Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-08net: bgmac: postpone turning IRQs off to avoid SoC hangsRafał Miłecki
Turning IRQs off is done by accessing Ethernet controller registers. That can't be done until device's clock is enabled. It results in a SoC hang otherwise. This bug remained unnoticed for years as most bootloaders keep all Ethernet interfaces turned on. It seems to only affect a niche SoC family BCM47189. It has two Ethernet controllers but CFE bootloader uses only the first one. Fixes: 34322615cbaa ("net: bgmac: Mask interrupts during probe") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-07ionic: remove dead device fail pathShannon Nelson
Remove the probe error path code that leaves the driver bound to the device, but with essentially a dead device. This was useful maybe twice early in the driver's life and no longer makes sense to keep. Fixes: 30a1e6d0f8e2 ("ionic: keep ionic dev on lif init fail") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-07ionic: remove WARN_ON to prevent panic_on_warnNitya Sunkad
Remove unnecessary early code development check and the WARN_ON that it uses. The irq alloc and free paths have long been cleaned up and this check shouldn't have stuck around so long. Fixes: 77ceb68e29cc ("ionic: Add notifyq support") Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-07octeontx2-af: Move validation of ptp pointer before its usageSai Krishna
Moved PTP pointer validation before its use to avoid smatch warning. Also used kzalloc/kfree instead of devm_kzalloc/devm_kfree. Fixes: 2ef4e45d99b1 ("octeontx2-af: Add PTP PPS Errata workaround on CN10K silicon") Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-07octeontx2-af: Promisc enable/disable through mboxRatheesh Kannoth
In legacy silicon, promiscuous mode is only modified through CGX mbox messages. In CN10KB silicon, it is modified from CGX mbox and NIX. This breaks legacy application behaviour. Fix this by removing call from NIX. Fixes: d6c9784baf59 ("octeontx2-af: Invoke exact match functions if supported") Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-07Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-07-05 (igc) This series contains updates to igc driver only. Husaini adds check to increment Qbv change error counter only on taprio Qbvs. He also removes delay during Tx ring configuration and resolves Tx hang that could occur when transmitting on a gate to be closed. Prasad Koya reports ethtool link mode as TP (twisted pair). Tee Min corrects value for max SDU. Aravindhan ensures that registers for PPS are always programmed to occur in future. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-06gve: Set default duplex configuration to fullJunfeng Guo
Current duplex mode was unset in the driver, resulting in the default parameter being set to 0, which corresponds to half duplex. It might mislead users to have incorrect expectation about the driver's transmission capabilities. Set the default duplex configuration to full, as the driver runs in full duplex mode at this point. Fixes: 7e074d5a76ca ("gve: Enable Link Speed Reporting in the driver.") Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Message-ID: <20230706044128.2726747-1-junfeng.guo@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-06Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-07-05 (ice) This series contains updates to ice driver only. Sridhar fixes incorrect comparison of max Tx rate limit to occur against each TC value rather than the aggregate. He also resolves an issue with the wrong VSI being used when setting max Tx rate when TCs are enabled. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix tx queue rate limit when TCs are configured ice: Fix max_rate check while configuring TX rate limits ==================== Link: https://lore.kernel.org/r/20230705201346.49370-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-06Merge tag 'mlx5-fixes-2023-07-05' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2023-07-05 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: RX, Fix page_pool page fragment tracking for XDP net/mlx5: Query hca_cap_2 only when supported net/mlx5e: TC, CT: Offload ct clear only once net/mlx5e: Check for NOT_READY flag state after locking net/mlx5: Register a unique thermal zone per device net/mlx5e: RX, Fix flush and close release flow of regular rq for legacy rq net/mlx5e: fix memory leak in mlx5e_ptp_open net/mlx5e: fix memory leak in mlx5e_fs_tt_redirect_any_create net/mlx5e: fix double free in mlx5e_destroy_flow_table ==================== Link: https://lore.kernel.org/r/20230705175757.284614-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-06net: mscc: ocelot: fix oversize frame dropping for preemptible TCsVladimir Oltean
This switch implements Hold/Release in a strange way, with no control from the user as required by IEEE 802.1Q-2018 through Set-And-Hold-MAC and Set-And-Release-MAC, but rather, it emits HOLD requests implicitly based on the schedule. Namely, when the gate of a preemptible TC is about to close (actually QSYS::PREEMPTION_CFG.HOLD_ADVANCE octet times in advance of this event), the QSYS seems to emit a HOLD request pulse towards the MAC which preempts the currently transmitted packet, and further packets are held back in the queue system. This allows large frames to be squeezed through small time slots, because HOLD requests initiated by the gate events result in the frame being segmented in multiple fragments, the bit time of which is equal to the size of the time slot. It has been reported that the vsc9959_tas_guard_bands_update() logic breaks this, because it doesn't take preemptible TCs into account, and enables oversized frame dropping when the time slot doesn't allow a full MTU to be sent, but it does allow 2*minFragSize to be sent (128B). Packets larger than 128B are dropped instead of being sent in multiple fragments. Confusingly, the manual says: | For guard band, SDU calculation of a traffic class of a port, if | preemption is enabled (through 'QSYS::PREEMPTION_CFG.P_QUEUES') then | QSYS::PREEMPTION_CFG.HOLD_ADVANCE is used, otherwise | QSYS::QMAXSDU_CFG_*.QMAXSDU_* is used. but this only refers to the static guard band durations, and the QMAXSDU_CFG_* registers have dual purpose - the other being oversized frame dropping, which takes place irrespective of whether frames are preemptible or express. So, to fix the problem, we need to call vsc9959_tas_guard_bands_update() from ocelot_port_update_active_preemptible_tcs(), and modify the guard band logic to consider a different (lower) oversize limit for preemptible traffic classes. Fixes: 403ffc2c34de ("net: mscc: ocelot: add support for preemptible traffic classes") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Message-ID: <20230705104422.49025-4-vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-06net: mscc: ocelot: extend ocelot->fwd_domain_lock to cover ocelot->tas_lockVladimir Oltean
In a future commit we will have to call vsc9959_tas_guard_bands_update() from ocelot_port_update_active_preemptible_tcs(), and that will be impossible due to the AB/BA locking dependencies between ocelot->tas_lock and ocelot->fwd_domain_lock. Just like we did in commit 3ff468ef987e ("net: mscc: ocelot: remove struct ocelot_mm_state :: lock"), the only solution is to expand the scope of ocelot->fwd_domain_lock for it to also serialize changes made to the Time-Aware Shaper, because those will have to result in a recalculation of cut-through TCs, which is something that depends on the forwarding domain. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Message-ID: <20230705104422.49025-2-vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-06net: mvneta: fix txq_map in case of txq_number==1Klaus Kudielka
If we boot with mvneta.txq_number=1, the txq_map is set incorrectly: MVNETA_CPU_TXQ_ACCESS(1) refers to TX queue 1, but only TX queue 0 is initialized. Fix this. Fixes: 50bf8cb6fc9c ("net: mvneta: Configure XPS support") Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://lore.kernel.org/r/20230705053712.3914-1-klaus.kudielka@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-05Merge tag 'net-6.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, bpf and wireguard. Current release - regressions: - nvme-tcp: fix comma-related oops after sendpage changes Current release - new code bugs: - ptp: make max_phase_adjustment sysfs device attribute invisible when not supported Previous releases - regressions: - sctp: fix potential deadlock on &net->sctp.addr_wq_lock - mptcp: - ensure subflow is unhashed before cleaning the backlog - do not rely on implicit state check in mptcp_listen() Previous releases - always broken: - net: fix net_dev_start_xmit trace event vs skb_transport_offset() - Bluetooth: - fix use-bdaddr-property quirk - L2CAP: fix multiple UaFs - ISO: use hci_sync for setting CIG parameters - hci_event: fix Set CIG Parameters error status handling - hci_event: fix parsing of CIS Established Event - MGMT: fix marking SCAN_RSP as not connectable - wireguard: queuing: use saner cpu selection wrapping - sched: act_ipt: various bug fixes for iptables <> TC interactions - sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX - dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging - eth: sfc: fix null-deref in devlink port without MAE access - eth: ibmvnic: do not reset dql stats on NON_FATAL err Misc: - xsk: honor SO_BINDTODEVICE on bind" * tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits) nfp: clean mc addresses in application firmware when closing port selftests: mptcp: pm_nl_ctl: fix 32-bit support selftests: mptcp: depend on SYN_COOKIES selftests: mptcp: userspace_pm: report errors with 'remove' tests selftests: mptcp: userspace_pm: use correct server port selftests: mptcp: sockopt: return error if wrong mark selftests: mptcp: sockopt: use 'iptables-legacy' if available selftests: mptcp: connect: fail if nft supposed to work mptcp: do not rely on implicit state check in mptcp_listen() mptcp: ensure subflow is unhashed before cleaning the backlog s390/qeth: Fix vipa deletion octeontx-af: fix hardware timestamp configuration net: dsa: sja1105: always enable the send_meta options net: dsa: tag_sja1105: fix MAC DA patching from meta frames net: Replace strlcpy with strscpy pptp: Fix fib lookup calls. mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX xsk: Honor SO_BINDTODEVICE on bind ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported ...
2023-07-05igc: Handle PPS start time programming for past time valuesAravindhan Gunasekaran
I225/6 hardware can be programmed to start PPS output once the time in Target Time registers is reached. The time programmed in these registers should always be into future. Only then PPS output is triggered when SYSTIM register reaches the programmed value. There are two modes in i225/6 hardware to program PPS, pulse and clock mode. There were issues reported where PPS is not generated when start time is in past. Example 1, "echo 0 0 0 2 0 > /sys/class/ptp/ptp0/period" In the current implementation, a value of '0' is programmed into Target time registers and PPS output is in pulse mode. Eventually an interrupt which is triggered upon SYSTIM register reaching Target time is not fired. Thus no PPS output is generated. Example 2, "echo 0 0 0 1 0 > /sys/class/ptp/ptp0/period" Above case, a value of '0' is programmed into Target time registers and PPS output is in clock mode. Here, HW tries to catch-up the current time by incrementing Target Time register. This catch-up time seem to vary according to programmed PPS period time as per the HW design. In my experiments, the delay ranged between few tens of seconds to few minutes. The PPS output is only generated after the Target time register reaches current time. In my experiments, I also observed PPS stopped working with below test and could not recover until module is removed and loaded again. 1) echo 0 <future time> 0 1 0 > /sys/class/ptp/ptp1/period 2) echo 0 0 0 1 0 > /sys/class/ptp/ptp1/period 3) echo 0 0 0 1 0 > /sys/class/ptp/ptp1/period After this PPS did not work even if i re-program with proper values. I could only get this back working by reloading the driver. This patch takes care of calculating and programming appropriate future time value into Target Time registers. Fixes: 5e91c72e560c ("igc: Fix PPS delta between two synchronized end-points") Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 18:34:38 +0000