| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit b3ca9eef6646576ad506a96d941d87a69f66732a ]
This driver is susceptible to a form of the bug explained in commit
c26a2c2ddc01 ("gianfar: Fix TX timestamping with a stacked DSA driver")
and in Documentation/networking/timestamping.rst section "Other caveats
for MAC drivers", specifically it timestamps any skb which has
SKBTX_HW_TSTAMP, and does not consider if timestamping has been enabled
in adapter->hwtstamp_config.tx_type.
Evaluate the proper TX timestamping condition only once on the TX
path (in tsnep_xmit_frame_ring()) and store the result in an additional
TX entry flag. Evaluate the new TX entry flag in the TX confirmation path
(in tsnep_tx_poll()).
This way SKBTX_IN_PROGRESS is set by the driver as required, but never
evaluated. SKBTX_IN_PROGRESS shall not be evaluated as it can be set
by a stacked DSA driver and evaluating it would lead to unwanted
timestamps.
Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver")
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250514195657.25874-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 92ec4855034b2c4d13f117558dc73d20581fa9ff ]
The driver only offloads neighbors that are constructed on top of net
devices registered by it or their uppers (which are all Ethernet). The
device supports GRE encapsulation and decapsulation of forwarded
traffic, but the driver will not offload dummy neighbors constructed on
top of GRE net devices as they are not uppers of its net devices:
# ip link add name gre1 up type gre tos inherit local 192.0.2.1 remote 198.51.100.1
# ip neigh add 0.0.0.0 lladdr 0.0.0.0 nud noarp dev gre1
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 NOARP
(Note that the neighbor is not marked with 'offload')
When the driver is reloaded and the existing configuration is replayed,
the driver does not perform the same check regarding existing neighbors
and offloads the previously added one:
# devlink dev reload pci/0000:01:00.0
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 offload NOARP
If the neighbor is later deleted, the driver will ignore the
notification (given the GRE net device is not its upper) and will
therefore keep referencing freed memory, resulting in a use-after-free
[1] when the net device is deleted:
# ip neigh del 0.0.0.0 lladdr 0.0.0.0 dev gre1
# ip link del dev gre1
Fix by skipping neighbor replay if the net device for which the replay
is performed is not our upper.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x1ea/0x200
Read of size 8 at addr ffff888155b0e420 by task ip/2282
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
mlxsw_sp_neigh_entry_update+0x1ea/0x200
mlxsw_sp_router_rif_gone_sync+0x2a8/0x440
mlxsw_sp_rif_destroy+0x1e9/0x750
mlxsw_sp_netdevice_ipip_ol_event+0x3c9/0xdc0
mlxsw_sp_router_netdevice_event+0x3ac/0x15e0
notifier_call_chain+0xca/0x150
call_netdevice_notifiers_info+0x7f/0x100
unregister_netdevice_many_notify+0xc8c/0x1d90
rtnl_dellink+0x34e/0xa50
rtnetlink_rcv_msg+0x6fb/0xb70
netlink_rcv_skb+0x131/0x360
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x121/0x1b0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 8fdb09a7674c ("mlxsw: spectrum_router: Replay neighbours when RIF is made")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/c53c02c904fde32dad484657be3b1477884e9ad6.1747225701.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dcb479fde00be9a151c047d0a7c0626b64eb0019 ]
If ntuple filters count is modified followed by
unicast filters count using devlink then the ntuple count
set by user is ignored and all the ntuple filters are
being reallocated. Fix this by storing the ntuple count
set by user. Without this patch, say if user tries
to modify ntuple count as 8 followed by ucast filter count as 4
using devlink commands then ntuple count is being reverted to
default value 16 i.e, not retaining user set value 8.
Fixes: 39c469188b6d ("octeontx2-pf: Add ucast filter count configurability via devlink.")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747054357-5850-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf449f35e77fd44017abf991fac1f9ab7705bbe0 ]
Each CGX block supports 4 logical MACs (LMACS). Receive
counters CGX_CMR_RX_STAT0-8 are per LMAC and CGX_CMR_RX_STAT9-12
are per CGX.
Due a bug in previous patch, stale Per CGX counters values observed.
Fixes: 66208910e57a ("octeontx2-af: Support to retrieve CGX LMAC stats")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250513071554.728922-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1bdea6fad6fb985ff13828373c48e337c4e939f9 ]
Since MTK_ESW_BIT is a bit number rather than a bitmap, it causes
MTK_HAS_CAPS to produce incorrect results. This leads to the ETH
driver not declaring MAC capabilities correctly for the MT7988 ESW.
Fixes: 445eb6448ed3 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/b8b37f409d1280fad9c4d32521e6207f63cd3213.1747110258.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 865ab2461375e3a5a2526f91f9a9f17b8931bc9e ]
MASCEC hardware block has a field called maximum transmit size for
TX secy. Max packet size going out of MCS block has be programmed
taking into account full packet size which has L2 header,SecTag
and ICV. MACSEC offload driver is configuring max transmit size as
macsec interface MTU which is incorrect. Say with 1500 MTU of real
device, macsec interface created on top of real device will have MTU of
1468(1500 - (SecTag + ICV)). This is causing packets from macsec
interface of size greater than or equal to 1468 are not getting
transmitted out because driver programmed max transmit size as 1468
instead of 1514(1500 + ETH_HDR_LEN).
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747053756-4529-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9d8a99c5a7c7f4f7eca2c168a4ec254409670035 ]
In one of the error paths in qlcnic_sriov_channel_cfg_cmd(), the memory
allocated in qlcnic_sriov_alloc_bc_mbx_args() for mailbox arguments is
not freed. Fix that by jumping to the error path that frees them, by
calling qlcnic_free_mbx_args(). This was found using static analysis.
Fixes: f197a7aa6288 ("qlcnic: VF-PF communication channel implementation")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250512044829.36400-1-abdun.nihaal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 588431474eb7572e57a927fa8558c9ba2f8af143 ]
MACsec offload is not supported in switchdev mode for uplink
representors. When switching to the uplink representor profile, the
MACsec offload feature must be cleared from the netdevice's features.
If left enabled, attempts to add offloads result in a null pointer
dereference, as the uplink representor does not support MACsec offload
even though the feature bit remains set.
Clear NETIF_F_HW_MACSEC in mlx5e_fix_uplink_rep_features().
Kernel log:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 29 UID: 0 PID: 4714 Comm: ip Not tainted 6.14.0-rc4_for_upstream_debug_2025_03_02_17_35 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__mutex_lock+0x128/0x1dd0
Code: d0 7c 08 84 d2 0f 85 ad 15 00 00 8b 35 91 5c fe 03 85 f6 75 29 49 8d 7e 60 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a6 15 00 00 4d 3b 76 60 0f 85 fd 0b 00 00 65 ff
RSP: 0018:ffff888147a4f160 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 000000000000000f RSI: 0000000000000000 RDI: 0000000000000078
RBP: ffff888147a4f2e0 R08: ffffffffa05d2c19 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: 0000000000000018 R15: ffff888152de0000
FS: 00007f855e27d800(0000) GS:ffff88881ee80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004e5768 CR3: 000000013ae7c005 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
Call Trace:
<TASK>
? die_addr+0x3d/0xa0
? exc_general_protection+0x144/0x220
? asm_exc_general_protection+0x22/0x30
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? __mutex_lock+0x128/0x1dd0
? lockdep_set_lock_cmp_fn+0x190/0x190
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? mutex_lock_io_nested+0x1ae0/0x1ae0
? lock_acquire+0x1c2/0x530
? macsec_upd_offload+0x145/0x380
? lockdep_hardirqs_on_prepare+0x400/0x400
? kasan_save_stack+0x30/0x40
? kasan_save_stack+0x20/0x40
? kasan_save_track+0x10/0x30
? __kasan_kmalloc+0x77/0x90
? __kmalloc_noprof+0x249/0x6b0
? genl_family_rcv_msg_attrs_parse.constprop.0+0xb5/0x240
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? mlx5e_macsec_add_rxsa+0x11a0/0x11a0 [mlx5_core]
macsec_update_offload+0x26c/0x820
? macsec_set_mac_address+0x4b0/0x4b0
? lockdep_hardirqs_on_prepare+0x284/0x400
? _raw_spin_unlock_irqrestore+0x47/0x50
macsec_upd_offload+0x2c8/0x380
? macsec_update_offload+0x820/0x820
? __nla_parse+0x22/0x30
? genl_family_rcv_msg_attrs_parse.constprop.0+0x15e/0x240
genl_family_rcv_msg_doit+0x1cc/0x2a0
? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
? cap_capable+0xd4/0x330
genl_rcv_msg+0x3ea/0x670
? genl_family_rcv_msg_dumpit+0x2a0/0x2a0
? lockdep_set_lock_cmp_fn+0x190/0x190
? macsec_update_offload+0x820/0x820
netlink_rcv_skb+0x12b/0x390
? genl_family_rcv_msg_dumpit+0x2a0/0x2a0
? netlink_ack+0xd80/0xd80
? rwsem_down_read_slowpath+0xf90/0xf90
? netlink_deliver_tap+0xcd/0xac0
? netlink_deliver_tap+0x155/0xac0
? _copy_from_iter+0x1bb/0x12c0
genl_rcv+0x24/0x40
netlink_unicast+0x440/0x700
? netlink_attachskb+0x760/0x760
? lock_acquire+0x1c2/0x530
? __might_fault+0xbb/0x170
netlink_sendmsg+0x749/0xc10
? netlink_unicast+0x700/0x700
? __might_fault+0xbb/0x170
? netlink_unicast+0x700/0x700
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x53f/0x760
? import_iovec+0x7/0x10
? kernel_sendmsg+0x30/0x30
? __copy_msghdr+0x3c0/0x3c0
? filter_irq_stacks+0x90/0x90
? stack_depot_save_flags+0x28/0xa30
___sys_sendmsg+0xeb/0x170
? kasan_save_stack+0x30/0x40
? copy_msghdr_from_user+0x110/0x110
? do_syscall_64+0x6d/0x140
? lock_acquire+0x1c2/0x530
? __virt_addr_valid+0x116/0x3b0
? __virt_addr_valid+0x1da/0x3b0
? lock_downgrade+0x680/0x680
? __delete_object+0x21/0x50
__sys_sendmsg+0xf7/0x180
? __sys_sendmsg_sock+0x20/0x20
? kmem_cache_free+0x14c/0x4e0
? __x64_sys_close+0x78/0xd0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f855e113367
Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RSP: 002b:00007ffd15e90c88 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f855e113367
RDX: 0000000000000000 RSI: 00007ffd15e90cf0 RDI: 0000000000000004
RBP: 00007ffd15e90dbc R08: 0000000000000028 R09: 000000000045d100
R10: 00007f855e011dd8 R11: 0000000000000246 R12: 0000000000000019
R13: 0000000067c6b785 R14: 00000000004a1e80 R15: 0000000000000000
</TASK>
Modules linked in: 8021q garp mrp sch_ingress openvswitch nsh mlx5_ib mlx5_fwctl mlx5_dpll mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: mlx5_core]
---[ end trace 0000000000000000 ]---
Fixes: 8ff0ac5be144 ("net/mlx5: Add MACsec offload Tx command support")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1746958552-561295-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c92d6089d8ad7d4d815ebcedee3f3907b539ff1f ]
There is a situation where after THALT is set high, TGO stays high as
well. Because jiffies are never updated, as we are in a context with
interrupts disabled, we never exit that loop and have a deadlock.
That deadlock was noticed on a sama5d4 device that stayed locked for days.
Use retries instead of jiffies so that the timeout really works and we do
not have a deadlock anymore.
Fixes: e86cd53afc590 ("net/macb: better manage tx errors")
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250509121935.16282-1-othacehe@gnu.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ce2fa1dba204c761582674cf2eb9cbe0b949b5c7 ]
We had originally thought to have the mailbox go to ready in the background
while we were doing other things. One issue with this though is that we
can't disable it by clearing the ready state without also blocking
interrupts or calls to mbx_poll as it will just pop back to life during an
interrupt.
In order to prevent that from happening we can pull the code for toggling
to ready out of the interrupt path and instead place it in the
fbnic_mbx_poll_tx_ready path so that it becomes the only spot where the
Rx/Tx can toggle to the ready state. By doing this we can prevent races
where we disable the DMA and/or free buffers only to have an interrupt fire
and undo what we have done.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654722518.499179.11612865740376848478.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1b34d1c1dc8384884febd83140c9afbc7c4b9eb8 ]
This change pulls the call to fbnic_fw_xmit_cap_msg out of
fbnic_mbx_init_desc_ring and instead places it in the polling function for
getting the Tx ready. Doing that we can avoid the potential issue with an
interrupt coming in later from the firmware that causes it to get fired in
interrupt context.
Fixes: 20d2e88cc746 ("eth: fbnic: Add initial messaging to notify FW of our presence")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654721876.499179.9839651602256668493.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ab064f6005973d456f95ae99cd9ea0d8ab676cce ]
There were a couple different issues found in fbnic_mbx_poll_tx_ready.
Among them were the fact that we were sleeping much longer than we actually
needed to as the actual FW could respond in under 20ms. The other issue was
that we would just keep polling the mailbox even if the device itself had
gone away.
To address the responsiveness issues we can decrease the sleeps to 20ms and
use a jiffies based timeout value rather than just counting the number of
times we slept and then polled.
To address the hardware going away we can move the check for the firmware
BAR being present from where it was and place it inside the loop after the
mailbox descriptor ring is initialized and before we sleep so that we just
abort and return an error if the device went away during initialization.
With these two changes we see a significant improvement in boot times for
the driver.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654721224.499179.2698616208976624755.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0f9a959a0addd9bbc47e5d16c36b3a7f97981915 ]
The fbnic_mbx_flush_tx function had a number of issues.
First, we were waiting 200ms for the firmware to process the packets. We
can drop this to 20ms and in almost all cases this should be more than
enough time. So by changing this we can significantly reduce shutdown time.
Second, we were not making sure that the Tx path was actually shut off. As
such we could still have packets added while we were flushing the mailbox.
To prevent that we can now clear the ready flag for the Tx side and it
should stay down since the interrupt is disabled.
Third, we kept re-reading the tail due to the second issue. The tail should
not move after we have started the flush so we can just read it once while
we are holding the mailbox Tx lock. By doing that we are guaranteed that
the value should be consistent.
Fourth, we were keeping a count of descriptors cleaned due to the second
and third issues called out. That count is not a valid reason to be exiting
the cleanup, and with the tail only being read once we shouldn't see any
cases where the tail moves after the disable so the tracking of count can
be dropped.
Fifth, we were using attempts * sleep time to determine how long we would
wait in our polling loop to flush out the Tx. This can be very imprecise.
In order to tighten up the timing we are shifting over to using a jiffies
value of jiffies + 10 * HZ + 1 to determine the jiffies value we should
stop polling at as this should be accurate within once sleep cycle for the
total amount of time spent polling.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654719929.499179.16406653096197423749.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3b12f00ddd08e888273b2ac0488d396d90a836fc ]
In order to prevent the device from throwing spurious writes and/or reads
at us we need to gate the AXI fabric interface to the PCIe until such time
as we know the FW is in a known good state.
To accomplish this we use the mailbox as a mechanism for us to recognize
that the FW has acknowledged our presence and is no longer sending any
stale message data to us.
We start in fbnic_mbx_init by calling fbnic_mbx_reset_desc_ring function,
disabling the DMA in both directions, and then invalidating all the
descriptors in each ring.
We then poll the mailbox in fbnic_mbx_poll_tx_ready and when the interrupt
is set by the FW we pick it up and mark the mailboxes as ready, while also
enabling the DMA.
Once we have completed all the transactions and need to shut down we call
into fbnic_mbx_clean which will in turn call fbnic_mbx_reset_desc_ring for
each ring and shut down the DMA and once again invalidate the descriptors.
Fixes: 3646153161f1 ("eth: fbnic: Add register init to set PCIe/Ethernet device config")
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654718623.499179.7445197308109347982.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f34343cc11afc7bb1f881c3492bee3484016bf71 ]
Address to issues with the FW mailbox descriptor initialization.
We need to reverse the order of accesses when we invalidate an entry versus
writing an entry. When writing an entry we write upper and then lower as
the lower 32b contain the valid bit that makes the entire address valid.
However for invalidation we should write it in the reverse order so that
the upper is marked invalid before we update it.
Without this change we may see FW attempt to access pages with the upper
32b of the address set to 0 which will likely result in DMAR faults due to
write access failures on mailbox shutdown.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/174654717972.499179.8083789731819297034.stgit@ahduyck-xeon-server.home.arpa
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0093cb194a7511d1e68865fa35b763c72e44c2f0 ]
Use Device Serial Number instead of PCI bus/device/function for
the index of struct ice_adapter.
Functions on the same physical device should point to the very same
ice_adapter instance, but with two PFs, when at least one of them is
PCI-e passed-through to a VM, it is no longer the case - PFs will get
seemingly random PCI BDF values, and thus indices, what finally leds to
each of them being on their own instance of ice_adapter. That causes them
to don't attempt any synchronization of the PTP HW clock usage, or any
other future resources.
DSN works nicely in place of the index, as it is "immutable" in terms of
virtualization.
Fixes: 0e2bddf9e5f9 ("ice: add ice_adapter for shared data across PFs on the same NIC")
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250505161939.2083581-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fdb7f54700b1c88e734323a62fea986d9ce5a9c6 ]
Address E825C devices by PCI ID since dual IP core configurations
need 1 ice_adapter for both devices.
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 0093cb194a75 ("ice: use DSN instead of PCI BDF for ice_adapter index")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e8716b5b0dff1b3d523b4a83fd5e94d57b887c5c ]
Remove redundant PSE reset.
When setting FE register there is no need to reset PSE,
doing so may cause FE to work abnormal.
Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/3a5223473e086a4b54a2b9a44df7d9ddcc2bc75a
Fixes: dee4dd10c79aa ("net: ethernet: mtk_eth_soc: ppe: add support for multiple PPEs")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://patch.msgid.link/18f0ac7d83f82defa3342c11ef0d1362f6b81e88.1746406763.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4db6c75124d871fbabf8243f947d34cc7e0697fc ]
The purpose of resetting the TX queue is to reset the byte and packet
count as well as to clear the software flow control XOFF bit.
MediaTek developers pointed out that netdev_reset_queue would only
resets queue 0 of the network device.
Queues that are not reset may cause unexpected issues.
Packets may stop being sent after reset and "transmit timeout" log may
be displayed.
Import fix from MediaTek's SDK to resolve this issue.
Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/319c0d9905579a46dc448579f892f364f1f84818
Fixes: f63959c7eec31 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/c9ff9adceac4f152239a0f65c397f13547639175.1746406763.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ee512922ddd7d64afe2b28830a88f19063217649 ]
In case the CMD_RTS got corrupted by interferences, the MSE102x
doesn't allow a retransmission of the command. Instead the Ethernet
frame must be shifted out of the SPI FIFO. Since the actual length is
unknown, assume the maximum possible value.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-5-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d4dda902dac194e3231a1ed0f76c6c3b6340ba8a ]
Since there is no protection in the SPI protocol against electrical
interferences, the driver shouldn't blindly trust the length payload
of CMD_RTS. So introduce a bounds check for incoming frames.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-4-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 74987089ec678b4018dba0a609e9f4bf6ef7f4ad ]
The LEN_MASK for CMD_RTS doesn't cover the whole parameter mask.
The Bit 11 is reserved, so adjust LEN_MASK accordingly.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 55f362885951b2d00fd7fbb02ef0227deea572c2 ]
The MSE102x doesn't provide any SPI commands for interrupt handling.
So in case the interrupt fired before the driver requests the IRQ,
the interrupt will never fire again. In order to fix this always poll
for pending packets after opening the interface.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4971394d9d624f91689d766f31ce668d169d9959 ]
Currently the ptp_clock_register() is called before relative
ptp resource ready. It may cause unexpected result when upper
layer called the ptp API during the timewindow. Fix it by
moving the ptp_clock_register() to the function end.
Fixes: 0bf5eb788512 ("net: hns3: add support for PTP")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250430093052.2400464-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e317aebeefcb3b0c71f2305af3c22871ca6b3833 ]
The size of the tm_qset file of debugfs is limited to 64 KB,
which is too small in the scenario with 1280 qsets.
The size needs to be expanded to 1 MB.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250430093052.2400464-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8e6b9c6ea5a55045eed6526d8ee49e93192d1a58 ]
When a VF is passthrough to a VM, and the VM is killed, the reported
interrupt may not been handled, it will remain, and won't be clear by
the nic engine even with a flr or tqp reset. When the VM restart, the
interrupt of the first vector may be dropped by the second enable_irq
in vfio, see the issue below:
https://gitlab.com/qemu-project/qemu/-/issues/2884#note_2423361621
We notice that the vfio has always behaved this way, and the interrupt
is a residue of the nic engine, so we fix the problem by moving the
vector enable process out of the enable_irq loop.
Fixes: 08a100689d4b ("net: hns3: re-organize vector handle")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250430093052.2400464-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef2383d078edcbe3055032436b16cdf206f26de2 ]
The VF driver missed to store the rx VLAN tag strip state when
user change the rx VLAN tag offload state. And it will default
to enable the rx vlan tag strip when re-init VF device after
reset. So if user disable rx VLAN tag offload, and trig reset,
then the HW will still strip the VLAN tag from packet nad fill
into RX BD, but the VF driver will ignore it for rx VLAN tag
offload disabled. It may cause the rx VLAN tag dropped.
Fixes: b2641e2ad456 ("net: hns3: Add support of hardware rx-vlan-offload to HNS3 VF driver")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250430093052.2400464-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 34f42736b325287a7b2ce37e415838f539767bda ]
When the host loses heartbeat messages from the device,
the driver calls the device-specific ndo_stop function,
which frees the resources. If the driver is unloaded in
this scenario, it calls ndo_stop again, attempting to free
resources that have already been freed, leading to a host
hang issue. To resolve this, dev_close should be called
instead of the device-specific stop function.dev_close
internally calls ndo_stop to stop the network interface
and performs additional cleanup tasks. During the driver
unload process, if the device is already down, ndo_stop
is not called.
Fixes: 5cb96c29aa0e ("octeon_ep: add heartbeat monitor")
Signed-off-by: Sathesh B Edara <sedara@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250429114624.19104-1-sedara@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a179aad12badc43201cbf45d1e8ed2c1383c76b9 ]
Activate TX hang workaround also in
fec_enet_txq_submit_skb() when TSO is not enabled.
Errata: ERR007885
Symptoms: NETDEV WATCHDOG: eth0 (fec): transmit queue 0 timed out
commit 37d6017b84f7 ("net: fec: Workaround for imx6sx enet tx hang when enable three queues")
There is a TDAR race condition for mutliQ when the software sets TDAR
and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles).
This will cause the udma_tx and udma_tx_arbiter state machines to hang.
So, the Workaround is checking TDAR status four time, if TDAR cleared by
hardware and then write TDAR, otherwise don't set TDAR.
Fixes: 53bb20d1faba ("net: fec: add variable reg_desc_active to speed things up")
Signed-off-by: Mattias Barthel <mattias.barthel@atlascopco.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250429090826.3101258-1-mattiasbarthel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d52e2e38b85c8b7bc00dca55c2499f46f8c8198 ]
Always map the `skb` to the LS descriptor. Previously skb was
mapped to EXT descriptor when the number of fragments is zero with
GSO enabled. Mapping the skb to EXT descriptor prevents it from
being freed, leading to a memory leak
Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250429052527.10031-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 927069d5c40c1cfa7b2d13cfc6d7d58bc6f85c50 ]
Recent updates to the PTP part of bnxt changed the way PTP FIFO is
cleared, skbs waiting for TX timestamps are now cleared during
ndo_close() call. To do clearing procedure, the ptp structure must
exist and point to a valid address. Module destroy sequence had ptp
clear code running before netdev close causing invalid memory access and
kernel crash. Change the sequence to destroy ptp structure after device
close.
Fixes: 8f7ae5a85137 ("bnxt_en: improve TX timestamping FIFO configuration")
Reported-by: Taehee Yoo <ap420073@gmail.com>
Closes: https://lore.kernel.org/netdev/CAMArcTWDe2cd41=ub=zzvYifaYcYv-N-csxfqxUvejy_L0D6UQ@mail.gmail.com/
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250430170343.759126-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 02e8be5a032cae0f4ca33c6053c44d83cf4acc93 ]
For version 1 register dump that includes the PCIe stats, the existing
code incorrectly assumes that all PCIe stats are 64-bit values. Fix it
by using an array containing the starting and ending index of the 32-bit
values. The loop in bnxt_get_regs() will use the array to do proper
endian swap for the 32-bit values.
Fixes: b5d600b027eb ("bnxt_en: Add support for 'ethtool -d'")
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6b87bd94f34370bbf1dfa59352bed8efab5bf419 ]
When retrieving the FW coredump using ethtool, it can sometimes cause
memory corruption:
BUG: KFENCE: memory corruption in __bnxt_get_coredump+0x3ef/0x670 [bnxt_en]
Corrupted memory at 0x000000008f0f30e8 [ ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ] (in kfence-#45):
__bnxt_get_coredump+0x3ef/0x670 [bnxt_en]
ethtool_get_dump_data+0xdc/0x1a0
__dev_ethtool+0xa1e/0x1af0
dev_ethtool+0xa8/0x170
dev_ioctl+0x1b5/0x580
sock_do_ioctl+0xab/0xf0
sock_ioctl+0x1ce/0x2e0
__x64_sys_ioctl+0x87/0xc0
do_syscall_64+0x5c/0xf0
entry_SYSCALL_64_after_hwframe+0x78/0x80
...
This happens when copying the coredump segment list in
bnxt_hwrm_dbg_dma_data() with the HWRM_DBG_COREDUMP_LIST FW command.
The info->dest_buf buffer is allocated based on the number of coredump
segments returned by the FW. The segment list is then DMA'ed by
the FW and the length of the DMA is returned by FW. The driver then
copies this DMA'ed segment list to info->dest_buf.
In some cases, this DMA length may exceed the info->dest_buf length
and cause the above BUG condition. Fix it by capping the copy
length to not exceed the length of info->dest_buf. The extra
DMA data contains no useful information.
This code path is shared for the HWRM_DBG_COREDUMP_LIST and the
HWRM_DBG_COREDUMP_RETRIEVE FW commands. The buffering is different
for these 2 FW commands. To simplify the logic, we need to move
the line to adjust the buffer length for HWRM_DBG_COREDUMP_RETRIEVE
up, so that the new check to cap the copy length will work for both
commands.
Fixes: c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ea9376cf68230e05492f22ca45d329f16e262c7b ]
When handling HWRM_DBG_COREDUMP_LIST FW command in
bnxt_hwrm_dbg_dma_data(), the allocated buffer info->dest_buf is
not freed in the error path. In the normal path, info->dest_buf
is assigned to coredump->data and it will eventually be freed after
the coredump is collected.
Free info->dest_buf immediately inside bnxt_hwrm_dbg_dma_data() in
the error path.
Fixes: c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length")
Reported-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1ae04e489dd757e1e61999362f33e7c554c3b9e3 ]
On some architectures (e.g. ARM), calling pci_alloc_irq_vectors()
will immediately cause the MSIX table to be written. This will not
work if we haven't called bnxt_reserve_rings() to properly map
the MSIX table to the MSIX vectors reserved by FW.
Fix the FW error recovery path to delay the bnxt_init_int_mode() ->
pci_alloc_irq_vectors() call by removing it from bnxt_hwrm_if_change().
bnxt_request_irq() later in the code path will call it and by then the
MSIX table is properly mapped.
Fixes: 4343838ca5eb ("bnxt_en: Replace deprecated PCI MSIX APIs")
Suggested-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a63db07e4ecd45b027718168faf7d798bb47bf58 ]
If bnxt_rx_vlan() fails because the VLAN protocol ID is invalid,
the SKB is freed but we're missing the call to recycle it. This
may cause the warning:
"page_pool_release_retry() stalled pool shutdown"
Add the missing skb_mark_for_recycle() in bnxt_rx_vlan().
Fixes: 86b05508f775 ("bnxt_en: Use the unified RX page pool buffers for XDP and non-XDP")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8e6cc9045380f3f0c48ebda2bda5e1abe263388d ]
When RDMA driver is loaded, running offline self test is not
supported and driver returns failure early. But it is not clearing
the input buffer and hence the application prints some junk
characters for individual test results.
Fix it by clearing the buffer before returning.
Fixes: 895621f1c816 ("bnxt_en: Don't support offline self test when RoCE driver is loaded")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9ab7a709c926c16b4433cf02d04fcbcf35aaab2b ]
WARN_ON() is triggered in __flush_work() if bnxt_init_chip() fails
because we call cancel_work_sync() on dim work that has not been
initialized.
WARNING: CPU: 37 PID: 5223 at kernel/workqueue.c:4201 __flush_work.isra.0+0x212/0x230
The driver relies on the BNXT_STATE_NAPI_DISABLED bit to check if dim
work has already been cancelled. But in the bnxt_open() path,
BNXT_STATE_NAPI_DISABLED is not set and this causes the error
path to think that it needs to cancel the uninitalized dim work.
Fix it by setting BNXT_STATE_NAPI_DISABLED during initialization.
The bit will be cleared when we enable NAPI and initialize dim work.
Fixes: 40452969a506 ("bnxt_en: Fix DIM shutdown")
Suggested-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6e0490fc36cdac696f96e57b61d93b9ae32e0f4c ]
If the mtk_poll_rx() function detects the MTK_RESETTING flag, it will
jump to release_desc and refill the high word of the SDP on the 4GB RFB.
Subsequently, mtk_rx_clean will process an incorrect SDP, leading to a
panic.
Add patch from MediaTek's SDK to resolve this.
Fixes: 2d75891ebc09 ("net: ethernet: mtk_eth_soc: support 36-bit DMA addressing on MT7988")
Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/71f47ea785699c6aa3b922d66c2bdc1a43da25b1
Signed-off-by: Chad Monroe <chad@monroe.io>
Link: https://patch.msgid.link/4adc2aaeb0fb1b9cdc56bf21cf8e7fa328daa345.1745715843.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c7d6cb96d5c33b5148f3dc76fcd30a9b8cd9e973 ]
Commit 1a931c4f5e68 ("igc: add lock preventing multiple simultaneous PTM
transactions") added a new mutex to protect concurrent PTM transactions.
This lock is acquired in igc_ptp_reset() in order to ensure the PTM
registers are properly disabled after a device reset.
The flow where the lock is acquired already holds a spinlock, so acquiring
a mutex leads to a sleep-while-locking bug, reported both by smatch,
and the kernel test robot.
The critical section in igc_ptp_reset() does correctly use the
readx_poll_timeout_atomic variants, but the standard PTM flow uses regular
sleeping variants. This makes converting the mutex to a spinlock a bit
tricky.
Instead, re-order the locking in igc_ptp_reset. Acquire the mutex first,
and then the tmreg_lock spinlock. This is safe because there is no other
ordering dependency on these locks, as this is the only place where both
locks were acquired simultaneously. Indeed, any other flow acquiring locks
in that order would be wrong regardless.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: 1a931c4f5e68 ("igc: add lock preventing multiple simultaneous PTM transactions")
Link: https://lore.kernel.org/intel-wired-lan/Z_-P-Hc1yxcw0lTB@stanley.mountain/
Link: https://lore.kernel.org/intel-wired-lan/202504211511.f7738f5d-lkp@intel.com/T/#u
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ed375b182140eeb9c73609b17939c8a29b27489e ]
Before the referenced commit, the shutdown just called idpf_remove(),
this way IDPF_REMOVE_IN_PROG was protecting us from the serv_task
rescheduling reset. Without this flag set the shutdown process is
vulnerable to HW reset or any other triggering conditions (such as
default mailbox being destroyed).
When one of conditions checked in idpf_service_task becomes true,
vc_event_task can be rescheduled during shutdown, this leads to accessing
freed memory e.g. idpf_req_rel_vector_indexes() trying to read
vport->q_vector_idxs. This in turn causes the system to become defunct
during e.g. systemctl kexec.
Considering using IDPF_REMOVE_IN_PROG would lead to more heavy shutdown
process, instead just cancel the serv_task before cancelling
adapter->serv_task before cancelling adapter->vc_event_task to ensure that
reset will not be scheduled while we are doing a shutdown.
Fixes: 4c9106f4906a ("idpf: fix adapter NULL pointer dereference on reboot")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8a558cbda51bef09773c72bf74a32047479110c7 ]
In case of failing on rss_data->rss_key allocation the function is
freeing vport without freeing earlier allocated q_vector_idxs. Fix it.
Move from freeing in error branch to goto scheme.
Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Suggested-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e7e5ae71831c44d58627a991e603845a2fed2cab ]
As it's name suggests, parse_eeprom() parses EEPROM data.
This is done by reading data, 16 bits at a time as follows:
for (i = 0; i < 128; i++)
((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom(np, i));
sromdata is at the same memory location as psrom.
And the type of psrom is a pointer to struct t_SROM.
As can be seen in the loop above, data is stored in sromdata, and thus psrom,
as 16-bit little-endian values.
However, the integer fields of t_SROM are host byte order integers.
And in the case of led_mode this leads to a little endian value
being incorrectly treated as host byte order.
Looking at rio_set_led_mode, this does appear to be a bug as that code
masks led_mode with 0x1, 0x2 and 0x8. Logic that would be effected by a
reversed byte order.
This problem would only manifest on big endian hosts.
Found by inspection while investigating a sparse warning
regarding the crc field of t_SROM.
I believe that warning is a false positive. And although I plan
to send a follow-up to use little-endian types for other the integer
fields of PSROM_t I do not believe that will involve any bug fixes.
Compile tested only.
Fixes: c3f45d322cbd ("dl2k: Add support for IP1000A-based cards")
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250425-dlink-led-mode-v1-1-6bae3c36e736@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 713dd6c2deca88cba0596b1e2576f7b7a8e5c59e ]
Split offloads into csum, tso and other offloads so that tunneled
packets do not by default have all the offloads enabled.
Stateless offloads for encapsulated packets are not yet supported in
firmware/software but in the driver we were setting the features same as
non encapsulated features.
Fixed naming to clarify CSUM bits are being checked for Tx.
Inherit netdev features to VLAN interfaces as well.
Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration")
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Zachary Goldstein <zachmgoldstein@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250425222636.3188441-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 425c5f266b2edeee0ce16fedd8466410cdcfcfe3 ]
As mentioned in the commit baeb705fd6a7 ("ice: always check VF VSI
pointer values"), we need to perform a null pointer check on the return
value of ice_get_vf_vsi() before using it.
Fixes: 6ebbe97a4881 ("ice: Add a per-VF limit on number of FDIR filters")
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250425222636.3188441-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dfd76010f8e821b66116dec3c7d90dd2403d1396 ]
A use-after-free error popped up in stress testing:
[Mon Apr 21 21:21:33 2025] BUG: KFENCE: use-after-free write in pdsc_auxbus_dev_del+0xef/0x160 [pds_core]
[Mon Apr 21 21:21:33 2025] Use-after-free write at 0x000000007013ecd1 (in kfence-#47):
[Mon Apr 21 21:21:33 2025] pdsc_auxbus_dev_del+0xef/0x160 [pds_core]
[Mon Apr 21 21:21:33 2025] pdsc_remove+0xc0/0x1b0 [pds_core]
[Mon Apr 21 21:21:33 2025] pci_device_remove+0x24/0x70
[Mon Apr 21 21:21:33 2025] device_release_driver_internal+0x11f/0x180
[Mon Apr 21 21:21:33 2025] driver_detach+0x45/0x80
[Mon Apr 21 21:21:33 2025] bus_remove_driver+0x83/0xe0
[Mon Apr 21 21:21:33 2025] pci_unregister_driver+0x1a/0x80
The actual device uninit usually happens on a separate thread
scheduled after this code runs, but there is no guarantee of order
of thread execution, so this could be a problem. There's no
actual need to clear the client_id at this point, so simply
remove the offending code.
Fixes: 10659034c622 ("pds_core: add the aux client API")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250425203857.71547-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b699bdc720c0255d1bb76cecba7382c1f2107af5 ]
In preparation for adding a new auxiliary_device for the PF,
make the vif type an argument to pdsc_auxbus_dev_add(). Pass in
the address of the padev pointer so that the caller can specify
where to save it and keep the mutex usage within the function.
Link: https://patch.msgid.link/r/20250320194412.67983-3-shannon.nelson@amd.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: dfd76010f8e8 ("pds_core: remove write-after-free of client_id")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e8562da829432d04a0de1830146984c89844f35e ]
Since there really is no useful return, advertising a return value
is rather misleading. Make pdsc_auxbus_dev_del() a void function.
Link: https://patch.msgid.link/r/20250320194412.67983-2-shannon.nelson@amd.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: dfd76010f8e8 ("pds_core: remove write-after-free of client_id")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8c47d5753a119f1c986bc3ed92e9178d2624e1e8 ]
When removing the clock bits for clocks which aren't used by the
Ethernet driver their names should also have been removed from the
mtk_clks_source_name array.
Remove them now as enum mtk_clks_map needs to match the
mtk_clks_source_name array so the driver can make sure that all required
clocks are present and correctly name missing clocks.
Fixes: 887b1d1adb2e ("net: ethernet: mtk_eth_soc: drop clocks unused by Ethernet driver")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/d075e706ff1cebc07f9ec666736d0b32782fd487.1745555321.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e54b4db35e201a9173da9cb7abc8377e12abaf87 ]
In mtk_star_rx_poll function, on event processing completion, the
mtk_star_emac driver calls napi_complete_done but ignores its return
code and enable RX DMA interrupts inconditionally. This return code
gives the info if a device should avoid rearming its interrupts or not,
so fix this behaviour by taking it into account.
Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250424-mtk_star_emac-fix-spinlock-recursion-issue-v2-2-f3fde2e529d8@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
