summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2021-07-20igc: Remove phy->type checkingSasha Neftin
i225 devices have only one phy->type: copper. There is no point checking phy->type during the igc_has_link method from the watchdog that invoked every 2 seconds. This patch comes to clean up these pointless checkings. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20igc: Remove _I_PHY_ID checkingSasha Neftin
i225 devices have only one PHY vendor. There is no point checking _I_PHY_ID during the link establishment and auto-negotiation process. This patch comes to clean up these pointless checkings. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20igc: Check if num of q_vectors is smaller than max before array accessSasha Neftin
Ensure that the adapter->q_vector[MAX_Q_VECTORS] array isn't accessed beyond its size. It was fixed by using a local variable num_q_vectors as a limit for loop index, and ensure that num_q_vectors is not bigger than MAX_Q_VECTORS. Suggested-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20net/e1000e: Fix spelling mistake "The" -> "This"Tree Davies
There is a spelling mistake in the comment block. Signed-off-by: Tree Davies <tdavies@darkphysics.net> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add space to the debug printSasha Neftin
Minor fixes to allow debug prints more readable. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add support for the next LOM generationSasha Neftin
Add devices IDs for the next LOM generations that will be available on the next Intel Client platforms This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add support for Lunar LakeSasha Neftin
Add devices IDs for the next LOM generations that will be available on the next Intel Client platform (Lunar Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Additional PHY power saving in S0ixSasha Neftin
After transferring the MAC-PHY interface to the SMBus set the PHY to S0ix low power idle mode. Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add polling mechanism to indicate CSME DPG exitSasha Neftin
Per guidance from the CSME architecture team, it may take up to 1 second for unconfiguring dynamic power gating mode. Practically it can take more time. Wait up to 2.5 seconds to indicate dynamic power gating exit from the S0ix configuration. Detect scenarios that take more than 1 second but less than 2.5 seconds will emit warning message. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add handshake with the CSME to support S0ixSasha Neftin
On the corporate system, the driver will ask from the CSME (manageability engine) to perform device settings are required to allow S0ix residency. This patch provides initial support. Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20net: marvell: clean up trigraph warning on ??! stringColin Ian King
The character sequence ??! is a trigraph and causes the following clang warning: drivers/net/ethernet/marvell/mvneta.c:2604:39: warning: trigraph ignored [-Wtrigraphs] Clean this by replacing it with single ?. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: mvpp2: deny disabling autoneg for 802.3z modesRussell King (Oracle)
The documentation for Armada 8040 says: Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ... When <PortType> = 1 (1000BASE-X) this field must be set to 1. We presently ignore whether userspace requests autonegotiation or not through the ethtool ksettings interface. However, we have some network interfaces that wish to do this. To offer a consistent API across network interfaces, deny the ability to disable autonegotiation on mvpp2 hardware when in 1000BASE-X and 2500BASE-X. This means the only way to switch between 2500BASE-X and 1000BASE-X on SFPs that support this will be: # ethtool -s ethX advertise 0x20000006000 # 1000BASE-X Pause AsymPause # ethtool -s ethX advertise 0xe000 # 2500BASE-X Pause AsymPause Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Marek Behún <kabel@kernel.org> Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: mvneta: deny disabling autoneg for 802.3z modesRussell King (Oracle)
The documentation for Armada 38x says: Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ... When <PortType> = 1 (1000BASE-X) this field must be set to 1. We presently ignore whether userspace requests autonegotiation or not through the ethtool ksettings interface. However, we have some network interfaces that wish to do this. To offer a consistent API across network interfaces, deny the ability to disable autonegotiation on mvneta hardware when in 1000BASE-X and 2500BASE-X. This means the only way to switch between 2500BASE-X and 1000BASE-X on SFPs that support this will be: # ethtool -s ethX advertise 0x20000002000 # 1000BASE-X Pause # ethtool -s ethX advertise 0xa000 # 2500BASE-X Pause Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20Merge branch 's390-next'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: updates 2021-07-20 please apply the following patch series for qeth to netdev's net-next tree. This removes the deprecated support for OSN-mode devices, and does some follow-on cleanups. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20Revert "igc: Export LEDs"Kurt Kanzenbach
This reverts commit cf8331825a8d10e46fa574fdf015a65cb5a6db86. There are better Linux interfaces to export the different LED modes and blinking reasons. Revert this patch for now and come up with better solution later. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20210719101640.16047-1-kurt@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-19iavf: fix locking of critical sectionsStefan Assmann
To avoid races between iavf_init_task(), iavf_reset_task(), iavf_watchdog_task(), iavf_adminq_task() as well as the shutdown and remove functions more locking is required. The current protection by __IAVF_IN_CRITICAL_TASK is needed in additional places. - The reset task performs state transitions, therefore needs locking. - The adminq task acts on replies from the PF in iavf_virtchnl_completion() which may alter the states. - The init task is not only run during probe but also if a VF gets stuck to reinitialize it. - The shutdown function performs a state transition. - The remove function performs a state transition and also free's resources. iavf_lock_timeout() is introduced to avoid waiting infinitely and cause a deadlock. Rather unlock and print a warning. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-19iavf: do not override the adapter state in the watchdog taskStefan Assmann
The iavf watchdog task overrides adapter->state to __IAVF_RESETTING when it detects a pending reset. Then schedules iavf_reset_task() which takes care of the reset. The reset task is capable of handling the reset without changing adapter->state. In fact we lose the state information when the watchdog task prematurely changes the adapter state. This may lead to a crash if instead of the reset task the iavf_remove() function gets called before the reset task. In that case (if we were in state __IAVF_RUNNING previously) the iavf_remove() function triggers iavf_close() which fails to close the device because of the incorrect state information. This may result in a crash due to pending interrupts. kernel BUG at drivers/pci/msi.c:357! [...] Call Trace: [<ffffffffbddf24dd>] pci_disable_msix+0x3d/0x50 [<ffffffffc08d2a63>] iavf_reset_interrupt_capability+0x23/0x40 [iavf] [<ffffffffc08d312a>] iavf_remove+0x10a/0x350 [iavf] [<ffffffffbddd3359>] pci_device_remove+0x39/0xc0 [<ffffffffbdeb492f>] __device_release_driver+0x7f/0xf0 [<ffffffffbdeb49c3>] device_release_driver+0x23/0x30 [<ffffffffbddcabb4>] pci_stop_bus_device+0x84/0xa0 [<ffffffffbddcacc2>] pci_stop_and_remove_bus_device+0x12/0x20 [<ffffffffbddf361f>] pci_iov_remove_virtfn+0xaf/0x160 [<ffffffffbddf3bcc>] sriov_disable+0x3c/0xf0 [<ffffffffbddf3ca3>] pci_disable_sriov+0x23/0x30 [<ffffffffc0667365>] i40e_free_vfs+0x265/0x2d0 [i40e] [<ffffffffc0667624>] i40e_pci_sriov_configure+0x144/0x1f0 [i40e] [<ffffffffbddd5307>] sriov_numvfs_store+0x177/0x1d0 Code: 00 00 e8 3c 25 e3 ff 49 c7 86 88 08 00 00 00 00 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 8b 7b 28 e8 0d 44 RIP [<ffffffffbbbf1068>] free_msi_irqs+0x188/0x190 The solution is to not touch the adapter->state in iavf_watchdog_task() and let the reset task handle the state transition. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-19i40e: improve locking of mac_filter_hashStefan Assmann
i40e_config_vf_promiscuous_mode() calls i40e_getnum_vf_vsi_vlan_filters() without acquiring the mac_filter_hash_lock spinlock. This is unsafe because mac_filter_hash may get altered in another thread while i40e_getnum_vf_vsi_vlan_filters() traverses the hashes. Simply adding the spinlock in i40e_getnum_vf_vsi_vlan_filters() is not possible as it already gets called in i40e_get_vlan_list_sync() with the spinlock held. Therefore adding a wrapper that acquires the spinlock and call the correct function where appropriate. Fixes: 37d318d7805f ("i40e: Remove scheduling while atomic possibility") Fix-suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-16igc: Export LEDsKurt Kanzenbach
Each i225 has three LEDs. Export them via the LED class framework. Each LED is controllable via sysfs. Example: $ cd /sys/class/leds/igc_led0 $ cat brightness # Current Mode $ cat max_brightness # 15 $ echo 0 > brightness # Mode 0 $ echo 1 > brightness # Mode 1 The brightness field here reflects the different LED modes ranging from 0 to 15. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-16igc: Make flex filter more flexibleKurt Kanzenbach
Currently flex filters are only used for filters containing user data. However, it makes sense to utilize them also for filters having multiple conditions, because that's not supported by the driver at the moment. Add it. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-16igc: Allow for Flex Filters to be installedVinicius Costa Gomes
Allows Flex Filters to be installed. The previous restriction to the types of filters that can be installed can now be lifted. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-16igc: Integrate flex filter into ethtool opsKurt Kanzenbach
Use the flex filter mechanism to extend the current ethtool filter operations by intercoperating the user data. This allows to match eight more bytes within a Ethernet frame in addition to macs, ether types and vlan. The matching pattern looks like this: * dest_mac [6] * src_mac [6] * tpid [2] * vlan tci [2] * ether type [2] * user data [8] This can be used to match Profinet traffic classes by FrameID range. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-16igc: Add possibility to add flex filterKurt Kanzenbach
The Intel i225 NIC has the possibility to add flex filters which can match up to the first 128 byte of a packet. These filters are useful for all kind of packet matching. One particular use case is Profinet, as the different traffic classes are distinguished by the frame id range which cannot be matched by any other means. Add code to configure and enable flex filters. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-16bnx2x: remove unused variable 'cur_data_offset'Bill Wendling
Fix the clang build warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1862:13: error: variable 'cur_data_offset' set but not used [-Werror,-Wunused-but-set-variable] dma_addr_t cur_data_offset; Signed-off-by: Bill Wendling <morbo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16net: switchdev: Simplify 'mlxsw_sp_mc_write_mdb_entry()'Christophe JAILLET
Use 'bitmap_alloc()/bitmap_free()' instead of hand-writing it. This makes the code less verbose. Also, use 'bitmap_alloc()' instead of 'bitmap_zalloc()' because the bitmap is fully overridden by a 'bitmap_copy()' call just after its allocation. While at it, remove an extra and unneeded space. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16gve: fix the wrong AdminQ buffer overflow checkHaiyue Wang
The 'tail' pointer is also free-running count, so it needs to be masked as 'adminq_prod_cnt' does, to become an index value of AdminQ buffer. Fixes: 5cdad90de62c ("gve: Batch AQ commands for creating and destroying queues.") Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-14Merge tag 'net-5.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski. "Including fixes from bpf and netfilter. Current release - regressions: - sock: fix parameter order in sock_setsockopt() Current release - new code bugs: - netfilter: nft_last: - fix incorrect arithmetic when restoring last used - honor NFTA_LAST_SET on restoration Previous releases - regressions: - udp: properly flush normal packet at GRO time - sfc: ensure correct number of XDP queues; don't allow enabling the feature if there isn't sufficient resources to Tx from any CPU - dsa: sja1105: fix address learning getting disabled on the CPU port - mptcp: addresses a rmem accounting issue that could keep packets in subflow receive buffers longer than necessary, delaying MPTCP-level ACKs - ip_tunnel: fix mtu calculation for ETHER tunnel devices - do not reuse skbs allocated from skbuff_fclone_cache in the napi skb cache, we'd try to return them to the wrong slab cache - tcp: consistently disable header prediction for mptcp Previous releases - always broken: - bpf: fix subprog poke descriptor tracking use-after-free - ipv6: - allocate enough headroom in ip6_finish_output2() in case iptables TEE is used - tcp: drop silly ICMPv6 packet too big messages to avoid expensive and pointless lookups (which may serve as a DDOS vector) - make sure fwmark is copied in SYNACK packets - fix 'disable_policy' for forwarded packets (align with IPv4) - netfilter: conntrack: - do not renew entry stuck in tcp SYN_SENT state - do not mark RST in the reply direction coming after SYN packet for an out-of-sync entry - mptcp: cleanly handle error conditions with MP_JOIN and syncookies - mptcp: fix double free when rejecting a join due to port mismatch - validate lwtstate->data before returning from skb_tunnel_info() - tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path - mt76: mt7921: continue to probe driver when fw already downloaded - bonding: fix multiple issues with offloading IPsec to (thru?) bond - stmmac: ptp: fix issues around Qbv support and setting time back - bcmgenet: always clear wake-up based on energy detection Misc: - sctp: move 198 addresses from unusable to private scope - ptp: support virtual clocks and timestamping - openvswitch: optimize operation for key comparison" * tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (158 commits) net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave() sfc: add logs explaining XDP_TX/REDIRECT is not available sfc: ensure correct number of XDP queues sfc: fix lack of XDP TX queues - error XDP TX failed (-22) net: fddi: fix UAF in fza_probe net: dsa: sja1105: fix address learning getting disabled on the CPU port net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload net: Use nlmsg_unicast() instead of netlink_unicast() octeontx2-pf: Fix uninitialized boolean variable pps ipv6: allocate enough headroom in ip6_finish_output2() net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific net: bridge: multicast: fix MRD advertisement router port marking race net: bridge: multicast: fix PIM hello router port marking race net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340 dsa: fix for_each_child.cocci warnings virtio_net: check virtqueue_add_sgs() return value mptcp: properly account bulk freed memory selftests: mptcp: fix case multiple subflows limited by server mptcp: avoid processing packet if a subflow reset mptcp: fix syncookie process if mptcp can not_accept new subflow ...
2021-07-13sfc: add logs explaining XDP_TX/REDIRECT is not availableÍñigo Huguet
If it's not possible to allocate enough channels for XDP, XDP_TX and XDP_REDIRECT don't work. However, only a message saying that not enough channels were available was shown, but not saying what are the consequences in that case. The user didn't know if he/she can use XDP or not, if the performance is reduced, or what. Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-13sfc: ensure correct number of XDP queuesÍñigo Huguet
Commit 99ba0ea616aa ("sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues") intended to fix a problem caused by a round up when calculating the number of XDP channels and queues. However, this was not the real problem. The real problem was that the number of XDP TX queues had been reduced to half in commit e26ca4b53582 ("sfc: reduce the number of requested xdp ev queues"), but the variable xdp_tx_queue_count had remained the same. Once the correct number of XDP TX queues is created again in the previous patch of this series, this also can be reverted since the error doesn't actually exist. Only in the case that there is a bug in the code we can have different values in xdp_queue_number and efx->xdp_tx_queue_count. Because of this, and per Edward Cree's suggestion, I add instead a WARN_ON to catch if it happens again in the future. Note that the number of allocated queues can be higher than the number of used ones due to the round up, as explained in the existing comment in the code. That's why we also have to stop increasing xdp_queue_number beyond efx->xdp_tx_queue_count. Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-13sfc: fix lack of XDP TX queues - error XDP TX failed (-22)Íñigo Huguet
Fixes: e26ca4b53582 sfc: reduce the number of requested xdp ev queues The buggy commit intended to allocate less channels for XDP in order to be more unlikely to reach the limit of 32 channels of the driver. The idea was to use each IRQ/eventqeue for more XDP TX queues than before, calculating which is the maximum number of TX queues that one event queue can handle. For example, in EF10 each event queue could handle up to 8 queues, better than the 4 they were handling before the change. This way, it would have to allocate half of channels than before for XDP TX. The problem is that the TX queues are also contained inside the channel structs, and there are only 4 queues per channel. Reducing the number of channels means also reducing the number of queues, resulting in not having the desired number of 1 queue per CPU. This leads to getting errors on XDP_TX and XDP_REDIRECT if they're executed from a high numbered CPU, because there only exist queues for the low half of CPUs, actually. If XDP_TX/REDIRECT is executed in a low numbered CPU, the error doesn't happen. This is the error in the logs (repeated many times, even rate limited): sfc 0000:5e:00.0 ens3f0np0: XDP TX failed (-22) This errors happens in function efx_xdp_tx_buffers, where it expects to have a dedicated XDP TX queue per CPU. Reverting the change makes again more likely to reach the limit of 32 channels in machines with many CPUs. If this happen, no XDP_TX/REDIRECT will be possible at all, and we will have this log error messages: At interface probe: sfc 0000:5e:00.0: Insufficient resources for 12 XDP event queues (24 other channels, max 32) At every subsequent XDP_TX/REDIRECT failure, rate limited: sfc 0000:5e:00.0 ens3f0np0: XDP TX failed (-22) However, without reverting the change, it makes the user to think that everything is OK at probe time, but later it fails in an unpredictable way, depending on the CPU that handles the packet. It is better to restore the predictable behaviour. If the user sees the error message at probe time, he/she can try to configure the best way it fits his/her needs. At least, he/she will have 2 options: - Accept that XDP_TX/REDIRECT is not available (he/she may not need it) - Load sfc module with modparam 'rss_cpus' with a lower number, thus creating less normal RX queues/channels, letting more free resources for XDP, with some performance penalty. Anyway, let the calculation of maximum TX queues that can be handled by a single event queue, and use it only if it's less than the number of TX queues per channel. This doesn't happen in practice, but could happen if some constant values are tweaked in the future, such us EFX_MAX_TXQ_PER_CHANNEL, EFX_MAX_EVQ_SIZE or EFX_MAX_DMAQ_SIZE. Related mailing list thread: https://lore.kernel.org/bpf/20201215104327.2be76156@carbon/ Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-13net: ocelot: fix switchdev objects synced for wrong netdev with LAG offloadVladimir Oltean
The point with a *dev and a *brport_dev is that when we have a LAG net device that is a bridge port, *dev is an ocelot net device and *brport_dev is the bonding/team net device. The ocelot net device beneath the LAG does not exist from the bridge's perspective, so we need to sync the switchdev objects belonging to the brport_dev and not to the dev. Fixes: e4bd44e89dcf ("net: ocelot: replay switchdev events when joining bridge") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-12octeontx2-pf: Fix uninitialized boolean variable ppsColin Ian King
In the case where act->id is FLOW_ACTION_POLICE and also act->police.rate_bytes_ps > 0 or act->police.rate_pkt_ps is not > 0 the boolean variable pps contains an uninitialized value when function otx2_tc_act_set_police is called. Fix this by initializing pps to false. Addresses-Coverity: ("Uninitialized scalar variable)" Fixes: 68fbff68dbea ("octeontx2-pf: Add police action for TC flower") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-10Merge tag 'arm-soc-5.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC updates from Olof Johansson: "A few SoC (code) changes have queued up this cycle, mostly for minor changes and some refactoring and cleanup of legacy platforms. This branch also contains a few of the fixes that weren't sent in by the end of the release (all fairly minor). - Adding an additional maintainer for the TEE subsystem (Sumit Garg) - Quite a significant modernization of the IXP4xx platforms by Linus Walleij, revisiting with a new PCI host driver/binding, removing legacy mach/* include dependencies and moving platform detection/config to drivers/soc. Also some updates/cleanup of platform data. - Core power domain support for Tegra platforms, and some improvements in build test coverage by adding stubs for compile test targets. - A handful of updates to i.MX platforms, adding legacy (non-PSCI) SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform data and board fixups for iMX6/7. ... and a few smaller changes and fixes for Samsung, OMAP, Allwinner, Rockchip" * tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits) MAINTAINERS: Add myself as TEE subsystem reviewer ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device" hw_random: ixp4xx: Add OF support hw_random: ixp4xx: Add DT bindings hw_random: ixp4xx: Turn into a module hw_random: ixp4xx: Use SPDX license tag hw_random: ixp4xx: enable compile-testing pata: ixp4xx: split platform data to its own header soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h PCI: ixp4xx: Add a new driver for IXP4xx PCI: ixp4xx: Add device tree bindings for IXP4xx ARM/ixp4xx: Make NEED_MACH_IO_H optional ARM/ixp4xx: Move the virtual IObases MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree ARM: debug: add UART early console support for MSTAR SoCs ARM: dts: ux500: Fix LED probing ARM: imx: add smp support for imx7d ARM: imx6q: drop of_platform_default_populate() from init_machine arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory soc/tegra: fuse: Fix Tegra234-only builds ...
2021-07-09net: ti: fix UAF in tlan_remove_onePavel Skripkin
priv is netdev private data and it cannot be used after free_netdev() call. Using priv after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. Fixes: 1e0a8b13d355 ("tlan: cancel work at remove path") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-09net: qcom/emac: fix UAF in emac_removePavel Skripkin
adpt is netdev private data and it cannot be used after free_netdev() call. Using adpt after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. Fixes: 54e19bc74f33 ("net: qcom/emac: do not use devm on internal phy pdev") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-09net: moxa: fix UAF in moxart_mac_probePavel Skripkin
In case of netdev registration failure the code path will jump to init_fail label: init_fail: netdev_err(ndev, "init failed\n"); moxart_mac_free_memory(ndev); irq_map_fail: free_netdev(ndev); return ret; So, there is no need to call free_netdev() before jumping to error handling path, since it can cause UAF or double-free bug. Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08net: bcmgenet: Ensure all TX/RX queues DMAs are disabledFlorian Fainelli
Make sure that we disable each of the TX and RX queues in the TDMA and RDMA control registers. This is a correctness change to be symmetrical with the code that enables the TX and RX queues. Tested-by: Maxime Ripard <maxime@cerno.tech> Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08net: microchip: sparx5: fix kconfig warningRandy Dunlap
PHY_SPARX5_SERDES depends on OF so SPARX5_SWITCH should also depend on OF since 'select' does not follow any dependencies. WARNING: unmet direct dependencies detected for PHY_SPARX5_SERDES Depends on [n]: (ARCH_SPARX5 || COMPILE_TEST [=n]) && OF [=n] && HAS_IOMEM [=y] Selected by [y]: - SPARX5_SWITCH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y] Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: linux-arm-kernel@lists.infradead.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08cxgb4: fix IRQ free race during driver unloadShahjada Abul Husain
IRQs are requested during driver's ndo_open() and then later freed up in disable_interrupts() during driver unload. A race exists where driver can set the CXGB4_FULL_INIT_DONE flag in ndo_open() after the disable_interrupts() in driver unload path checks it, and hence misses calling free_irq(). Fix by unregistering netdevice first and sync with driver's ndo_open(). This ensures disable_interrupts() checks the flag correctly and frees up the IRQs properly. Fixes: b37987e8db5f ("cxgb4: Disable interrupts and napi before unregistering netdev") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08atl1c: fix Mikrotik 10/25G NIC detectionGatis Peisenieks
Since Mikrotik 10/25G NIC MDIO op emulation is not 100% reliable, on rare occasions it can happen that some physical functions of the NIC do not get initialized due to timeouted early MDIO op. This changes the atl1c probe on Mikrotik 10/25G NIC not to depend on MDIO op emulation. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-07stmmac: platform: Fix signedness bug in stmmac_probe_config_dt()YueHaibing
The "plat->phy_interface" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling is never triggered. Fixes: b9f0b2f634c0 ("net: stmmac: platform: fix probe for ACPI devices") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-07stmmac: dwmac-loongson: Fix unsigned comparison to zeroYueHaibing
plat->phy_interface is unsigned integer, so the condition can't be less than zero and the warning will never printed. Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-07Merge tag 'Wimplicit-fallthrough-clang-5.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull more fallthrough fixes from Gustavo Silva: "Fix maore fall-through warnings when building the kernel with clang and '-Wimplicit-fallthrough'" * tag 'Wimplicit-fallthrough-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: Input: Fix fall-through warning for Clang scsi: aic94xx: Fix fall-through warning for Clang i3c: master: cdns: Fix fall-through warning for Clang net/mlx4: Fix fall-through warning for Clang
2021-07-06octeontx2-pf: Fix assigned error return value that is never usedColin Ian King
Currently when the call to otx2_mbox_alloc_msg_cgx_mac_addr_update fails the error return variable rc is being assigned -ENOMEM and does not return early. rc is then re-assigned and the error case is not handled correctly. Fix this by returning -ENOMEM rather than assigning rc. Addresses-Coverity: ("Unused value") Fixes: 79d2be385e9e ("octeontx2-pf: offload DMAC filters to CGX/RPM block") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-06ixgbevf: use xso.real_dev instead of xso.dev in callback functions of struct ↵Taehee Yoo
xfrmdev_ops There are two pointers in struct xfrm_state_offload, *dev, *real_dev. These are used in callback functions of struct xfrmdev_ops. The *dev points whether bonding interface or real interface. If bonding ipsec offload is used, it points bonding interface If not, it points real interface. And real_dev always points real interface. So, ixgbevf should always use real_dev instead of dev. Of course, real_dev always not be null. Test commands: ip link add bond0 type bond #eth0 is ixgbevf interface ip link set eth0 master bond0 ip link set bond0 up ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \ transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \ 0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \ dst 14.0.0.70/24 proto tcp offload dev bond0 dir in Splat looks like: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 6 PID: 688 Comm: ip Not tainted 5.13.0-rc3+ #1168 RIP: 0010:ixgbevf_ipsec_find_empty_idx+0x28/0x1b0 [ixgbevf] Code: 00 00 0f 1f 44 00 00 55 53 48 89 fb 48 83 ec 08 40 84 f6 0f 84 9c 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 01 0f 8e 4c 01 00 00 66 81 3b 00 04 0f RSP: 0018:ffff8880089af390 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffff8880089af4f8 R08: 0000000000000003 R09: fffffbfff4287e11 R10: 0000000000000001 R11: ffff888005de8908 R12: 0000000000000000 R13: ffff88810936a000 R14: ffff88810936a000 R15: ffff888004d78040 FS: 00007fdf9883a680(0000) GS:ffff88811a400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bc14adbf40 CR3: 000000000b87c005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ixgbevf_ipsec_add_sa+0x1bf/0x9c0 [ixgbevf] ? rcu_read_lock_sched_held+0x91/0xc0 ? ixgbevf_ipsec_parse_proto_keys.isra.9+0x280/0x280 [ixgbevf] ? lock_acquire+0x191/0x720 ? bond_ipsec_add_sa+0x48/0x350 [bonding] ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0 ? rcu_read_lock_held+0x91/0xa0 ? rcu_read_lock_sched_held+0xc0/0xc0 bond_ipsec_add_sa+0x193/0x350 [bonding] xfrm_dev_state_add+0x2a9/0x770 ? memcpy+0x38/0x60 xfrm_add_sa+0x2278/0x3b10 [xfrm_user] ? xfrm_get_policy+0xaa0/0xaa0 [xfrm_user] ? register_lock_class+0x1750/0x1750 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user] ? rcu_read_lock_sched_held+0x91/0xc0 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? find_held_lock+0x3a/0x1c0 ? mutex_lock_io_nested+0x1210/0x1210 ? sched_clock_cpu+0x18/0x170 netlink_rcv_skb+0x121/0x350 [ ... ] Fixes: 272c2330adc9 ("xfrm: bail early on slave pass over skb") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-05Merge tag 'char-misc-5.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big set of char / misc and other driver subsystem updates for 5.14-rc1. Included in here are: - habanalabs driver updates - fsl-mc driver updates - comedi driver updates - fpga driver updates - extcon driver updates - interconnect driver updates - mei driver updates - nvmem driver updates - phy driver updates - pnp driver updates - soundwire driver updates - lots of other tiny driver updates for char and misc drivers This is looking more and more like the "various driver subsystems mushed together" tree... All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits) mcb: Use DEFINE_RES_MEM() helper macro and fix the end address PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls bus: mhi: Wait for M2 state during system resume bus: mhi: core: Fix power down latency intel_th: Wait until port is in reset before programming it intel_th: msu: Make contiguous buffers uncached intel_th: Remove an unused exit point from intel_th_remove() stm class: Spelling fix nitro_enclaves: Set Bus Master for the NE PCI device misc: ibmasm: Modify matricies to matrices misc: vmw_vmci: return the correct errno code siox: Simplify error handling via dev_err_probe() fpga: machxo2-spi: Address warning about unused variable lkdtm/heap: Add init_on_alloc tests selftests/lkdtm: Enable various testable CONFIGs lkdtm: Add CONFIG hints in errors where possible lkdtm: Enable DOUBLE_FAULT on all architectures lkdtm/heap: Add vmalloc linear overflow test lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE ...
2021-07-05net: stmmac: ptp: update tas basetime after ptp adjustXiaoliang Yang
After adjusting the ptp time, the Qbv base time may be the past time of the new current time. dwmac5 hardware limited the base time cannot be set as past time. This patch add a btr_reserve to store the base time get from qopt, then calculate the base time and reset the Qbv configuration after ptp time adjust. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-05net: stmmac: add mutex lock to protect est parametersXiaoliang Yang
Add a mutex lock to protect est structure parameters so that the EST parameters can be updated by other threads. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-05net: stmmac: separate the tas basetime calculation functionXiaoliang Yang
Separate the TAS basetime calculation function so that it can be called by other functions. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-03net: marvell: always set skb_shared_info in mvneta_swbm_add_rx_fragmentLorenzo Bianconi
Always set skb_shared_info data structure in mvneta_swbm_add_rx_fragment routine even if the fragment contains only the ethernet FCS. Fixes: 039fbc47f9f1 ("net: mvneta: alloc skb_shared_info on the mvneta_rx_swbm stack") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 06:05:03 +0000