summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2018-06-05mlxsw: Add extack messages for port_{un, }split failuresDavid Ahern
Return messages in extack for port split/unsplit errors. e.g., $ devlink port split swp1s1 count 4 Error: mlxsw_spectrum: Port cannot be split further. devlink answers: Invalid argument $ devlink port unsplit swp4 Error: mlxsw_spectrum: Port was not split. devlink answers: Invalid argument Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05devlink: Add extack to reload and port_{un, }split operationsDavid Ahern
Add extack argument to reload, port_split and port_unsplit operations. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05net: hns3: remove unused hclgevf_cfg_func_mta_filterArnd Bergmann
The last patch apparently added a complete replacement for this function, but left the old one in place, which now causes a harmless warning: drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c:731:12: 'hclgevf_cfg_func_mta_filter' defined but not used I assume it can be removed. Fixes: 3a678b5806e6 ("net: hns3: Optimize the VF's process of updating multicast MAC") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05qed*: Utilize FW 8.37.2.0Michal Kalderon
This FW contains several fixes and features. RDMA - Several modifications and fixes for Memory Windows - drop vlan and tcp timestamp from mss calculation in driver for this FW - Fix SQ completion flow when local ack timeout is infinite - Modifications in t10dif support ETH - Fix aRFS for tunneled traffic without inner IP. - Fix chip configuration which may fail under heavy traffic conditions. - Support receiving any-VNI in VXLAN and GENEVE RX classification. iSCSI / FcoE - Fix iSCSI recovery flow - Drop vlan and tcp timestamp from mss calc for fw 8.37.2.0 Misc - Several registers (split registers) won't read correctly with ethtool -d Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05net/mlx5e: fix error return code in mlx5e_alloc_rq()Wei Yongjun
Fix to return error code -ENOMEM from the kvzalloc_node() error handling case instead of 0, as done elsewhere in this function. Fixes: 069d11465a80 ("net/mlx5e: RX, Enhance legacy Receive Queue memory scheme") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05net/mlx5e: Make function mlx5e_change_rep_mtu() staticWei Yongjun
Fixes the following sparse warning: drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:903:5: warning: symbol 'mlx5e_change_rep_mtu' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05net: qualcomm: rmnet: Fix use after free while sending command ackSubash Abhinov Kasiviswanathan
When sending an ack to a command packet, the skb is still referenced after it is sent to the real device. Since the real device could free the skb, the device pointer would be invalid. Also, remove an unnecessary variable. Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05net: ipv6: Generate random IID for addresses on RAWIP devicesSubash Abhinov Kasiviswanathan
RAWIP devices such as rmnet do not have a hardware address and instead require the kernel to generate a random IID for the IPv6 addresses. Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05ixgbe: remove ndo_xdp_flush call ixgbe_xdp_flushJesper Dangaard Brouer
Remove the ndo_xdp_flush call implementation ixgbe_xdp_flush as no callers of ndo_xdp_flush are left. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-05i40e: remove ndo_xdp_flush call i40e_xdp_flushJesper Dangaard Brouer
Remove the ndo_xdp_flush call implementation i40e_xdp_flush as no callers of ndo_xdp_flush are left. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2018-06-04Merge branch '10GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-06-04 This series contains a smorgasbord of updates to documentation, e1000e, igb, ixgbe, ixgbevf and i40e. Benjamin Poirier fixes a potential kernel crash due to NULL pointer dereference in e1000e. Jeff updates the kernel documentation for e100 and e1000 to correct default values and URLs which were incorrect in the documentation. Also took the time to update these to the new reStructured text format for kernel documentation. Joanna Yurdal fixes a missing PTP transmit timestamp by ensuring that TSICR gets cleared when ICR is cleared. Sergey updates igb to reset all the transmit queues at one time so that we only have to wait once for all the queues to be reset. Alex fixes ixgbevf so that malicious driver detection (MDD) can co-exist with XDP. Emil and Tony extend the RTNL lock to ensure we get the most up-to-date values for the bits and avoid a possible race condition when going down. YueHaibing from Huawei introduces a helper function in ixgbe for operation reads to simplify the code a bit more. Daniel Borkmann adds support for XDP meta data when using build SKB for i40e. Shannon Nelson provides twp fixes for the IPSec code in ixgbe, first is to make sure we do not try to offload the decryption of any incoming packet that is destined for the management engine. The other fix is to resolve a cast problem introduced by a sparse cleanup patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04net: hns: Fix the process of adding broadcast addresses to tcamXi Wang
If the multicast mask value in device tree is configured not all 0xff, the broadcast mac will be lost from tcam table after the execution of command 'ifconfig up'. The address is appended by hns_ae_start, but will be clear later by hns_nic_set_rx_mode called in dev_open process. This patch fixed it by not use the multicast mask when add a broadcast address. Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04qed: use dma_zalloc_coherent instead of allocator/memsetYueHaibing
Use dma_zalloc_coherent instead of dma_alloc_coherent followed by memset 0. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04qed: Add srq core support for RoCE and iWARPYuval Bason
This patch adds support for configuring SRQ and provides the necessary APIs for rdma upper layer driver (qedr) to enable the SRQ feature. Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Yuval Bason <yuval.bason@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04net: ethernet: bnx2: Replace NULL comparisonVarsha Rao
This patch fixes the checkpatch issue of NULL comparison. Replace x == NULL with !x, by using the following coccinelle script: @disable is_null@ expression e; @@ -e==NULL +!e Signed-off-by: Varsha Rao <rvarsha016@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04net: ethernet: bnx2: Remove extra parenthesesVarsha Rao
The following coccinelle script removes extra parentheses to fix the clang warning of extraneous parentheses. @disable paren@ identifier i; expression e; statement s; @@ if ( -(i == e) +i == e ) s Suggested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Varsha Rao <rvarsha016@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04net: gemini: fix spelling mistake: "it" -> "is"YueHaibing
Trivial fix to spelling mistake in gemini dev_warn message Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04net: chelsio: Use zeroing memory allocator instead of allocator/memsetYueHaibing
Use dma_zalloc_coherent for allocating zeroed memory and remove unnecessary memset function. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04sh_eth: use DIV_ROUND_UP() in sh_eth_soft_swap()Sergei Shtylyov
When initializing 'maxp' in sh_eth_soft_swap(), the buffer length needs to be rounded up -- that's just asking for DIV_ROUND_UP()! Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04sh_eth: uninline sh_eth_soft_swap()Sergei Shtylyov
sh_eth_tsu_soft_swap() is called twice by the driver, remove *inline* and move that function from the header to the driver itself to let gcc decide whether to expand it inline or not... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04sh_eth: make sh_eth_soft_swap() work on ARMSergei Shtylyov
Browsing thru the driver disassembly, I noticed that ARM gcc generated no code whatsoever for sh_eth_soft_swap() while building a little-endian kernel -- apparently __LITTLE_ENDIAN__ was not being #define'd, however it got implicitly #define'd when building with the SH gcc (I could only find the explicit #define __LITTLE_ENDIAN that was #include'd when building a little-endian kernel). Luckily, the Ether controller only doing big- endian DMA is encountered on the early SH771x SoCs only and all ARM SoCs implement EDMR.DE and thus set 'sh_eth_cpu_data::hw_swap'. But anyway, we need to fix the #ifdef inside sh_eth_soft_swap() to something that would work on all architectures... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - replace the force_dma flag with a dma_configure bus method. (Nipun Gupta, although one patch is іncorrectly attributed to me due to a git rebase bug) - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai) - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the right thing for bounce buffering. - move dma-debug initialization to common code, and apply a few cleanups to the dma-debug code. - cleanup the Kconfig mess around swiotlb selection - swiotlb comment fixup (Yisheng Xie) - a trivial swiotlb fix. (Dan Carpenter) - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt) - add a new generic dma-noncoherent dma_map_ops implementation and use it for arc, c6x and nds32. - improve scatterlist validity checking in dma-debug. (Robin Murphy) - add a struct device quirk to limit the dma-mask to 32-bit due to bridge/system issues, and switch x86 to use it instead of a local hack for VIA bridges. - handle devices without a dma_mask more gracefully in the dma-direct code. * tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits) dma-direct: don't crash on device without dma_mask nds32: use generic dma_noncoherent_ops nds32: implement the unmap_sg DMA operation nds32: consolidate DMA cache maintainance routines x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag x86/pci-dma: remove the explicit nodac and allowdac option x86/pci-dma: remove the experimental forcesac boot option Documentation/x86: remove a stray reference to pci-nommu.c core, dma-direct: add a flag 32-bit dma limits dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs dma-debug: check scatterlist segments c6x: use generic dma_noncoherent_ops arc: use generic dma_noncoherent_ops arc: fix arc_dma_{map,unmap}_page arc: fix arc_dma_sync_sg_for_{cpu,device} arc: simplify arc_dma_sync_single_for_{cpu,device} dma-mapping: provide a generic dma-noncoherent implementation dma-mapping: simplify Kconfig dependencies riscv: add swiotlb support riscv: only enable ZONE_DMA32 for 64-bit ...
2018-06-04ixgbe: fix broken ipsec Rx with proper cast on spiShannon Nelson
Fix up a cast problem introduced by a sparse cleanup patch. This fixes a problem where the encrypted packets were not recognized on Rx and subsequently dropped. Fixes: 9cfbfa701b55 ("ixgbe: cleanup sparse warnings") Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04ixgbe: check ipsec ip addr against mgmt filtersShannon Nelson
Make sure we don't try to offload the decryption of an incoming packet that should get delivered to the management engine. This is a corner case that will likely be very seldom seen, but could really confuse someone if they were to hit it. Suggested-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04mlxsw: spectrum_span: Suppress VLAN on BRIDGE_VLAN_INFO_UNTAGGEDPetr Machata
When offloading mirroring to gretap or ip6gretap netdevices, an 802.1q bridge is one of the soft devices permissible in the underlay when resolving the packet path. After the packet path is resolved to a particular bridge egress device, flags on packet VLAN determine whether the egressed packet should be tagged. The current logic however only ever sets the VLAN tag, never suppresses it. Thus if there's a VLAN netdevice above the bridge that determines the packet VLAN, that VLAN is never unset, and mirroring is configured with VLAN tagging. Fix by setting the packet VLAN on both branches: set to zero (for unset) when BRIDGE_VLAN_INFO_UNTAGGED, copy the resolved VLAN (e.g. from bridge PVID) otherwise. Fixes: 946a11e7408e ("mlxsw: spectrum_span: Allow bridge for gretap mirror") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04mlxsw: spectrum_switchdev: Postpone respin on object deletionPetr Machata
VLAN deletion notifications are emitted before the relevant change is projected to bridge configuration. Thus, like with VLAN addition, schedule SPAN respin for later. Fixes: c520bc698647 ("mlxsw: Respin SPAN on switchdev events") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04ixgbe: fix possible race in reset subtaskTony Nguyen
Similar to ixgbevf, the same possibility for race exists. Extend the RTNL lock in ixgbe_reset_subtask() to protect the state bits; this is to make sure that we get the most up-to-date values for the bits and avoid a possible race when going down. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04bpf, i40e: add meta data supportDaniel Borkmann
Add support for XDP meta data when using build skb variant of the i40e driver. Implementation is analogous to the existing ixgbe and ixgbevf support for meta data from 366a88fe2f40 ("bpf, ixgbe: add meta data support") and be8333322eff ("ixgbevf: Add support for meta data"). With the build skb variant we get 192 bytes of extra headroom which can be used for encaps or meta data. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Tested-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04ixgbe: introduce a helper to simplify codeYueHaibing
ixgbe_dbg_reg_ops_read and ixgbe_dbg_netdev_ops_read copy-pasting the same code except for ixgbe_dbg_netdev_ops_buf/ixgbe_dbg_reg_ops_buf, so introduce a helper ixgbe_dbg_common_ops_read to remove redundant code. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04ixgbevf: fix possible race in the reset subtaskEmil Tantilov
Extend the RTNL lock in ixgbevf_reset_subtask() to protect the state bits check in addition to the call to ixgbevf_reinit_locked(). This is to make sure that we get the most up-to-date values for the bits and avoid a possible race when going down. Suggested-by: Zhiping du <zhipingdu@tencent.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04ixgbevf: Fix coexistence of malicious driver detection with XDPAlexander Duyck
In the case of the VF driver it is supposed to provide a context descriptor that allows us to provide information about the header offsets inside of the frame. However in the case of XDP we don't really have any of that information since the data is minimally processed. As a result we were seeing malicious driver detection (MDD) events being triggered when the PF had that functionality enabled. To address this I have added a bit of new code that will "prime" the XDP ring by providing one context descriptor that assumes the minimal setup of an Ethernet frame which is an L2 header length of 14. With just that we can provide enough information to make the hardware happy so that we don't trigger MDD events. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04igb: Wait 10ms just once after TX queues resetSergey Nemov
Move 10ms sleep out of function resetting TX queue. Reset all the TX queues in one turn and wait for all of them just once. Use usleep_range() instead of mdelay() in order not to affect transmission on other interfaces. Signed-off-by: Sergey Nemov <sergey.nemov@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04igb: Clear TSICR interrupts together with ICRJoanna Yurdal
Issuing "ip link set up/down" can block TSICR interrupts, what results in missing PTP Tx timestamp and no PPS pulse generation. Problem happens when the link is set up with the TSICR interrupts pending. ICR is cleared before enabling interrupts, while TSICR is not. When all TSICR interrupts are pending at this moment, time_sync interrupt will never be generated. TSICR should be cleared as well. In order to reproduce the issue: 1. Setup linux with IEEE 1588 grandmaster and PPS output enabled 2. Continue setting link up/down with random intervals between commands 3. Wait until PPS is not generated ( only one pulse is generated and PPS dies), and ptp4l complains constantly about Tx timeout. Signed-off-by: Joanna Yurdal <jyu@trackman.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04e1000e: Ignore TSYNCRXCTL when getting I219 clock attributesBenjamin Poirier
There have been multiple reports of crashes that look like kernel: RIP: 0010:[<ffffffff8110303f>] timecounter_read+0xf/0x50 [...] kernel: Call Trace: kernel: [<ffffffffa0806b0f>] e1000e_phc_gettime+0x2f/0x60 [e1000e] kernel: [<ffffffffa0806c5d>] e1000e_systim_overflow_work+0x1d/0x80 [e1000e] kernel: [<ffffffff810992c5>] process_one_work+0x155/0x440 kernel: [<ffffffff81099e16>] worker_thread+0x116/0x4b0 kernel: [<ffffffff8109f422>] kthread+0xd2/0xf0 kernel: [<ffffffff8163184f>] ret_from_fork+0x3f/0x70 These can be traced back to the fact that e1000e_systim_reset() skips the timecounter_init() call if e1000e_get_base_timinca() returns -EINVAL, which leads to a null deref in timecounter_read(). Commit 83129b37ef35 ("e1000e: fix systim issues", v4.2-rc1) reworked e1000e_get_base_timinca() in such a way that it can return -EINVAL for e1000_pch_spt if the SYSCFI bit is not set in TSYNCRXCTL. Some experimentation has shown that on I219 (e1000_pch_spt, "MAC: 12") adapters, the E1000_TSYNCRXCTL_SYSCFI flag is unstable; TSYNCRXCTL reads sometimes don't have the SYSCFI bit set. Retrying the read shortly after finds the bit to be set. This was observed at boot (probe) but also link up and link down. Moreover, the phc (PTP Hardware Clock) seems to operate normally even after reads where SYSCFI=0. Therefore, remove this register read and unconditionally set the clock parameters. Reported-by: Achim Mildenberger <admin@fph.physik.uni-karlsruhe.de> Message-Id: <20180425065243.g5mqewg5irkwgwgv@f2> Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1075876 Fixes: 83129b37ef35 ("e1000e: fix systim issues") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04net: mvpp2: mvpp2_percpu_read_relaxed() can be statickbuild test robot
Fixes: db9d7d36eecc ("net: mvpp2: Split the PPv2 driver to a dedicated directory") Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04net: aquantia: make function aq_fw2x_get_mac_permanent staticColin Ian King
The function aq_fw2x_get_mac_permanent is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: warning: symbol 'aq_fw2x_get_mac_permanent' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04Merge tag 'verbs_flow_counters' of ↵Jason Gunthorpe
git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma.git into for-next Pull verbs counters series from Leon Romanovsky: ==================== Verbs flow counters support This series comes to allow user space applications to monitor real time traffic activity and events of the verbs objects it manages, e.g.: ibv_qp, ibv_wq, ibv_flow. The API enables generic counters creation and define mapping to association with a verbs object, the current mlx5 driver is using this API for flow counters. With this API, an application can monitor the entire life cycle of object activity, defined here as a static counters attachment. This API also allows dynamic counters monitoring of measurement points for a partial period in the verbs object life cycle. In addition it presents the implementation of the generic counters interface. This will be achieved by extending flow creation by adding a new flow count specification type which allows the user to associate a previously created flow counters using the generic verbs counters interface to the created flow, once associated the user could read statistics by using the read function of the generic counters interface. The API includes: 1. create and destroyed API of a new counters objects 2. read the counters values from HW Note: Attaching API to allow application to define the measurement points per objects is a user space only API and this data is passed to kernel when the counted object (e.g. flow) is created with the counters object. =================== * tag 'verbs_flow_counters': IB/mlx5: Add counters read support IB/mlx5: Add flow counters read support IB/mlx5: Add flow counters binding support IB/mlx5: Add counters create and destroy support IB/uverbs: Add support for flow counters IB/core: Add support for flow counters IB/core: Support passing uhw for create_flow IB/uverbs: Add read counters support IB/core: Introduce counters read verb IB/uverbs: Add create/destroy counters support IB/core: Introduce counters object and its create/destroy IB/uverbs: Add an ib_uobject getter to ioctl() infrastructure net/mlx5: Export flow counter related API net/mlx5: Use flow counter pointer as input to the query function
2018-06-04net: ethernet: mlx4: Remove unnecessary parenthesesVarsha Rao
This patch fixes the clang warning of extraneous parentheses, with the following coccinelle script. @@ identifier i; expression e; statement s; @@ if ( -(i == e) +i == e ) s Suggested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Varsha Rao <rvarsha016@gmail.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04net: stmmac: Add Flexible PPS supportJose Abreu
This adds support for Flexible PPS output (which is equivalent to per_out output of PTP subsystem). Tested using an oscilloscope and the following commands: 1) Start PTP4L: # ptp4l -A -4 -H -m -i eth0 & 2) Set Flexible PPS frequency: # echo <idx> <ts> <tns> <ps> <pns> > /sys/class/ptp/ptpX/period Where, ts/tns is start time and ps/pns is period time, and ptpX is ptp of eth0. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04qed: Fix use of incorrect shmem address.Sudarsana Reddy Kalluru
Incorrect shared memory address is used while deriving the values for tc and pri_type. Use shmem address corresponding to 'oem_cfg_func' where the management firmare saves tc/pri_type values. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04qed: Fix shared memory inconsistency between driver and the MFW.Sudarsana Reddy Kalluru
The structure shared between driver and management firmware (MFW) differ in sizes. The additional field defined by the MFW is not relevant to the current driver. Add a dummy field to the structure. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03ixgbe: implement flush flag for ndo_xdp_xmitJesper Dangaard Brouer
When passed the XDP_XMIT_FLUSH flag ixgbe_xdp_xmit now performs the same kind of ring tail update as in ixgbe_xdp_flush. The update tail code in ixgbe_xdp_flush is generalized and shared with ixgbe_xdp_xmit. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-03i40e: implement flush flag for ndo_xdp_xmitJesper Dangaard Brouer
When passed the XDP_XMIT_FLUSH flag i40e_xdp_xmit now performs the same kind of ring tail update as in i40e_xdp_flush. The advantage is that all the necessary checks have been performed and xdp_ring can be updated, instead of having to perform the exact same steps/checks in i40e_xdp_flush Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-03xdp: add flags argument to ndo_xdp_xmit APIJesper Dangaard Brouer
This patch only change the API and reject any use of flags. This is an intermediate step that allows us to implement the flush flag operation later, for each individual driver in a separate patch. The plan is to implement flush operation via XDP_XMIT_FLUSH flag and then remove XDP_XMIT_FLAGS_NONE when done. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-03mlx4_core: restore optimal ICM memory allocationEric Dumazet
Commit 1383cb8103bb ("mlx4_core: allocate ICM memory in page size chunks") brought two regressions caught in our regression suite. The big one is an additional cost of 256 bytes of overhead per 4096 bytes, or 6.25 % which is unacceptable since ICM can be pretty large. This comes from having to allocate one struct mlx4_icm_chunk (256 bytes) per MLX4_TABLE_CHUNK, which the buggy commit shrank to 4KB (instead of prior 256KB) Note that mlx4_alloc_icm() is already able to try high order allocations and fallback to low-order allocations under high memory pressure. Most of these allocations happen right after boot time, when we get plenty of non fragmented memory, there is really no point being so pessimistic and break huge pages into order-0 ones just for fun. We only have to tweak gfp_mask a bit, to help falling back faster, without risking OOM killings. Second regression is an KASAN fault, that will need further investigations. Fixes: 1383cb8103bb ("mlx4_core: allocate ICM memory in page size chunks") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Cc: John Sperbeck <jsperbeck@google.com> Cc: Tarick Bedeir <tarick@google.com> Cc: Qing Huang <qing.huang@oracle.com> Cc: Daniel Jurgens <danielj@mellanox.com> Cc: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03net: axienet: remove stale comment of axienet_openYueHaibing
axienet_open no longer return -ENODEV when PHY cannot be connected to since commit d7cc3163e026 ("net: axienet: Support phy-less mode of operation") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03net: netcp: ethss: remove unnecessary pointer set to NULLYueHaibing
If statement has make sure the 'slave->phy' is NULL Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03net/mlx5: Make function mlx5_fpga_tls_send_teardown_cmd() staticWei Yongjun
Fixes the following sparse warning: drivers/net/ethernet/mellanox/mlx5/core/fpga/tls.c:199:6: warning: symbol 'mlx5_fpga_tls_send_teardown_cmd' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Filling in the padding slot in the bpf structure as a bug fix in 'ne' overlapped with actually using that padding area for something in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 07:01:20 +0000