summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2025-03-07gve: set xdp redirect target only when it is availableJoshua Washington
commit 415cadd505464d9a11ff5e0f6e0329c127849da5 upstream. Before this patch the NETDEV_XDP_ACT_NDO_XMIT XDP feature flag is set by default as part of driver initialization, and is never cleared. However, this flag differs from others in that it is used as an indicator for whether the driver is ready to perform the ndo_xdp_xmit operation as part of an XDP_REDIRECT. Kernel helpers xdp_features_(set|clear)_redirect_target exist to convey this meaning. This patch ensures that the netdev is only reported as a redirect target when XDP queues exist to forward traffic. Fixes: 39a7f4aa3e4a ("gve: Add XDP REDIRECT support for GQI-QPL format") Cc: stable@vger.kernel.org Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Jeroen de Borst <jeroendb@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Link: https://patch.msgid.link/20250214224417.1237818-1-joshwash@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-07net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()Wei Fang
commit 249df695c3ffe8c8d36d46c2580ce72410976f96 upstream. There is an off-by-one issue for the err_chained_bd path, it will free one more tx_swbd than expected. But there is no such issue for the err_map_data path. To fix this off-by-one issue and make the two error handling consistent, the increment of 'i' and 'count' remain in sync and enetc_unwind_tx_frame() is called for error handling. Fixes: fb8629e2cbfc ("net: enetc: add support for software TSO") Cc: stable@vger.kernel.org Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-9-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-07net: enetc: correct the xdp_tx statisticsWei Fang
commit 432a2cb3ee97a7c6ea578888fe81baad035b9307 upstream. The 'xdp_tx' is used to count the number of XDP_TX frames sent, not the number of Tx BDs. Fixes: 7ed2bc80074e ("net: enetc: add support for XDP_TX") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-4-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-07net: enetc: update UDP checksum when updating originTimestamp fieldWei Fang
commit bbcbc906ab7b5834c1219cd17a38d78dba904aa0 upstream. There is an issue with one-step timestamp based on UDP/IP. The peer will discard the sync packet because of the wrong UDP checksum. For ENETC v1, the software needs to update the UDP checksum when updating the originTimestamp field, so that the hardware can correctly update the UDP checksum when updating the correction field. Otherwise, the UDP checksum in the sync packet will be wrong. Fixes: 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-6-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-07net: enetc: keep track of correct Tx BD count in enetc_map_tx_tso_buffs()Wei Fang
commit da291996b16ebd10626d4b20288327b743aff110 upstream. When creating a TSO header, if the skb is VLAN tagged, the extended BD will be used and the 'count' should be increased by 2 instead of 1. Otherwise, when an error occurs, less tx_swbd will be freed than the actual number. Fixes: fb8629e2cbfc ("net: enetc: add support for software TSO") Cc: stable@vger.kernel.org Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-3-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-07net: enetc: fix the off-by-one issue in enetc_map_tx_buffs()Wei Fang
commit 39ab773e4c120f7f98d759415ccc2aca706bbc10 upstream. When a DMA mapping error occurs while processing skb frags, it will free one more tx_swbd than expected, so fix this off-by-one issue. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Cc: stable@vger.kernel.org Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-2-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-07net: ti: icss-iep: Reject perout generation requestMeghana Malladi
[ Upstream commit 54e1b4becf5e220be03db4e1be773c1310e8cbbd ] IEP driver supports both perout and pps signal generation but perout feature is faulty with half-cooked support due to some missing configuration. Remove perout support from the driver and reject perout requests with "not supported" error code. Fixes: c1e0230eeaab2 ("net: ti: icss-iep: Add IEP driver") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250227092441.1848419-1-m-malladi@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07net: ti: icss-iep: Remove spinlock-based synchronizationDiogo Ivo
[ Upstream commit 5758e03cf604aa282b9afa61aec3188c4a9b3fe7 ] As all sources of concurrency in hardware register access occur in non-interrupt context eliminate spinlock-based synchronization and rely on the mutex-based synchronization that is already present. Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 54e1b4becf5e ("net: ti: icss-iep: Reject perout generation request") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07net/mlx5: IRQ, Fix null string in debug printShay Drory
[ Upstream commit 2f5a6014eb168a97b24153adccfa663d3b282767 ] irq_pool_alloc() debug print can print a null string. Fix it by providing a default string to print. Fixes: 71e084e26414 ("net/mlx5: Allocating a pool of MSI-X vectors for SFs") Signed-off-by: Shay Drory <shayd@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501141055.SwfIphN0-lkp@intel.com/ Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20250225072608.526866-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.Harshal Chaudhari
[ Upstream commit 2d253726ff7106b39a44483b6864398bba8a2f74 ] Non IP flow, with vlan tag not working as expected while running below command for vlan-priority. fixed that. ethtool -N eth1 flow-type ether vlan 0x8000 vlan-mask 0x1fff action 0 loc 0 Fixes: 1274daede3ef ("net: mvpp2: cls: Add steering based on vlan Id and priority.") Signed-off-by: Harshal Chaudhari <hchaudhari@marvell.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250225042058.2643838-1-hchaudhari@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07ice: Fix deinitializing VF in error pathMarcin Szycik
[ Upstream commit 79990cf5e7aded76d0c092c9f5ed31eb1c75e02c ] If ice_ena_vfs() fails after calling ice_create_vf_entries(), it frees all VFs without removing them from snapshot PF-VF mailbox list, leading to list corruption. Reproducer: devlink dev eswitch set $PF1_PCI mode switchdev ip l s $PF1 up ip l s $PF1 promisc on sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs Trace (minimized): list_add corruption. next->prev should be prev (ffff8882e241c6f0), but was 0000000000000000. (next=ffff888455da1330). kernel BUG at lib/list_debug.c:29! RIP: 0010:__list_add_valid_or_report+0xa6/0x100 ice_mbx_init_vf_info+0xa7/0x180 [ice] ice_initialize_vf_entry+0x1fa/0x250 [ice] ice_sriov_configure+0x8d7/0x1520 [ice] ? __percpu_ref_switch_mode+0x1b1/0x5d0 ? __pfx_ice_sriov_configure+0x10/0x10 [ice] Sometimes a KASAN report can be seen instead with a similar stack trace: BUG: KASAN: use-after-free in __list_add_valid_or_report+0xf1/0x100 VFs are added to this list in ice_mbx_init_vf_info(), but only removed in ice_free_vfs(). Move the removing to ice_free_vf_entries(), which is also being called in other places where VFs are being removed (including ice_free_vfs() itself). Fixes: 8cd8a6b17d27 ("ice: move VF overflow message count into struct ice_mbx_vf_info") Reported-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/PH0PR11MB50138B635F2E5CEB7075325D961F2@PH0PR11MB5013.namprd11.prod.outlook.com Reviewed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07ice: add E830 HW VF mailbox message limit supportPaul Greenwalt
[ Upstream commit 59f4d59b25aec39a015c0949f4ec235c7a839c44 ] E830 adds hardware support to prevent the VF from overflowing the PF mailbox with VIRTCHNL messages. E830 will use the hardware feature (ICE_F_MBX_LIMIT) instead of the software solution ice_is_malicious_vf(). To prevent a VF from overflowing the PF, the PF sets the number of messages per VF that can be in the PF's mailbox queue (ICE_MBX_OVERFLOW_WATERMARK). When the PF processes a message from a VF, the PF decrements the per VF message count using the E830_MBX_VF_DEC_TRIG register. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: 79990cf5e7ad ("ice: Fix deinitializing VF in error path") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07ice: Add E830 device IDs, MAC type and registersPaul Greenwalt
[ Upstream commit ba1124f58afd37d9ff155d4ab7c9f209346aaed9 ] E830 is the 200G NIC family which uses the ice driver. Add specific E830 registers. Embed macros to use proper register based on (hw)->mac_type & name those macros to [ORIGINAL]_BY_MAC(hw). Registers only available on one of the macs will need to be explicitly referred to as E800_NAME instead of just NAME. PTP is not yet supported. Co-developed-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Milena Olech <milena.olech@intel.com> Co-developed-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Co-developed-by: Scott Taylor <scott.w.taylor@intel.com> Signed-off-by: Scott Taylor <scott.w.taylor@intel.com> Co-developed-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 79990cf5e7ad ("ice: Fix deinitializing VF in error path") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07net: cadence: macb: Synchronize stats calculationsSean Anderson
[ Upstream commit fa52f15c745ce55261b92873676f64f7348cfe82 ] Stats calculations involve a RMW to add the stat update to the existing value. This is currently not protected by any synchronization mechanism, so data races are possible. Add a spinlock to protect the update. The reader side could be protected using u64_stats, but we would still need a spinlock for the update side anyway. And we always do an update immediately before reading the stats anyway. Fixes: 89e5785fc8a6 ("[PATCH] Atmel MACB ethernet driver") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Link: https://patch.msgid.link/20250220162950.95941-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-27net/mlx5e: Don't call cleanup on profile rollback failureCosmin Ratiu
commit 4dbc1d1a9f39c3711ad2a40addca04d07d9ab5d0 upstream. When profile rollback fails in mlx5e_netdev_change_profile, the netdev profile var is left set to NULL. Avoid a crash when unloading the driver by not calling profile->cleanup in such a case. This was encountered while testing, with the original trigger that the wq rescuer thread creation got interrupted (presumably due to Ctrl+C-ing modprobe), which gets converted to ENOMEM (-12) by mlx5e_priv_init, the profile rollback also fails for the same reason (signal still active) so the profile is left as NULL, leading to a crash later in _mlx5e_remove. [ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2) [ 734.525513] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR [ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12 [ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12 [ 734.560153] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR [ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12 [ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12 [ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 745.538222] #PF: supervisor read access in kernel mode <snipped> [ 745.551290] Call Trace: [ 745.551590] <TASK> [ 745.551866] ? __die+0x20/0x60 [ 745.552218] ? page_fault_oops+0x150/0x400 [ 745.555307] ? exc_page_fault+0x79/0x240 [ 745.555729] ? asm_exc_page_fault+0x22/0x30 [ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core] [ 745.556698] auxiliary_bus_remove+0x18/0x30 [ 745.557134] device_release_driver_internal+0x1df/0x240 [ 745.557654] bus_remove_device+0xd7/0x140 [ 745.558075] device_del+0x15b/0x3c0 [ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core] [ 745.559112] mlx5_unregister_device+0x34/0x50 [mlx5_core] [ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core] [ 745.560203] remove_one+0x4e/0xd0 [mlx5_core] [ 745.560694] pci_device_remove+0x39/0xa0 [ 745.561112] device_release_driver_internal+0x1df/0x240 [ 745.561631] driver_detach+0x47/0x90 [ 745.562022] bus_remove_driver+0x84/0x100 [ 745.562444] pci_unregister_driver+0x3b/0x90 [ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core] [ 745.563415] __x64_sys_delete_module+0x14d/0x2f0 [ 745.563886] ? kmem_cache_free+0x1b0/0x460 [ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190 [ 745.564825] do_syscall_64+0x6d/0x140 [ 745.565223] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 745.565725] RIP: 0033:0x7f1579b1288b Fixes: 3ef14e463f6e ("net/mlx5e: Separate between netdev objects and mlx5e profiles initialization") Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-27nfp: bpf: Add check for nfp_app_ctrl_msg_alloc()Haoxiang Li
commit 878e7b11736e062514e58f3b445ff343e6705537 upstream. Add check for the return value of nfp_app_ctrl_msg_alloc() in nfp_bpf_cmsg_alloc() to prevent null pointer dereference. Fixes: ff3d43f7568c ("nfp: bpf: implement helpers for FW map ops") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Link: https://patch.msgid.link/20250218030409.2425798-1-haoxiang_li2024@163.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-27net: axienet: Set mac_managed_pmNick Hu
[ Upstream commit a370295367b55662a32a4be92565fe72a5aa79bb ] The external PHY will undergo a soft reset twice during the resume process when it wake up from suspend. The first reset occurs when the axienet driver calls phylink_of_phy_connect(), and the second occurs when mdio_bus_phy_resume() invokes phy_init_hw(). The second soft reset of the external PHY does not reinitialize the internal PHY, which causes issues with the internal PHY, resulting in the PHY link being down. To prevent this, setting the mac_managed_pm flag skips the mdio_bus_phy_resume() function. Fixes: a129b41fe0a8 ("Revert "net: phy: dp83867: perform soft reset and retain established link"") Signed-off-by: Nick Hu <nick.hu@sifive.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250217055843.19799-1-nick.hu@sifive.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-27ibmvnic: Don't reference skb after sending to VIOSNick Child
[ Upstream commit bdf5d13aa05ec314d4385b31ac974d6c7e0997c9 ] Previously, after successfully flushing the xmit buffer to VIOS, the tx_bytes stat was incremented by the length of the skb. It is invalid to access the skb memory after sending the buffer to the VIOS because, at any point after sending, the VIOS can trigger an interrupt to free this memory. A race between reading skb->len and freeing the skb is possible (especially during LPM) and will result in use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in ibmvnic_xmit+0x75c/0x1808 [ibmvnic] Read of size 4 at addr c00000024eb48a70 by task hxecom/14495 <...> Call Trace: [c000000118f66cf0] [c0000000018cba6c] dump_stack_lvl+0x84/0xe8 (unreliable) [c000000118f66d20] [c0000000006f0080] print_report+0x1a8/0x7f0 [c000000118f66df0] [c0000000006f08f0] kasan_report+0x128/0x1f8 [c000000118f66f00] [c0000000006f2868] __asan_load4+0xac/0xe0 [c000000118f66f20] [c0080000046eac84] ibmvnic_xmit+0x75c/0x1808 [ibmvnic] [c000000118f67340] [c0000000014be168] dev_hard_start_xmit+0x150/0x358 <...> Freed by task 0: kasan_save_stack+0x34/0x68 kasan_save_track+0x2c/0x50 kasan_save_free_info+0x64/0x108 __kasan_mempool_poison_object+0x148/0x2d4 napi_skb_cache_put+0x5c/0x194 net_tx_action+0x154/0x5b8 handle_softirqs+0x20c/0x60c do_softirq_own_stack+0x6c/0x88 <...> The buggy address belongs to the object at c00000024eb48a00 which belongs to the cache skbuff_head_cache of size 224 ================================================================== Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250214155233.235559-1-nnac123@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-27ibmvnic: Add stat for tx direct vs tx batchedNick Child
[ Upstream commit 2ee73c54a615b74d2e7ee6f20844fd3ba63fc485 ] Allow tracking of packets sent with send_subcrq direct vs indirect. `ethtool -S <dev>` will now provide a counter of the number of uses of each xmit method. This metric will be useful in performance debugging. Signed-off-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241001163531.1803152-1-nnac123@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: bdf5d13aa05e ("ibmvnic: Don't reference skb after sending to VIOS") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-27ibmvnic: Introduce send sub-crq directNick Child
[ Upstream commit 74839f7a82689bf5a21a5447cae8e3a7b7a606d2 ] Firmware supports two hcalls to send a sub-crq request: H_SEND_SUB_CRQ_INDIRECT and H_SEND_SUB_CRQ. The indirect hcall allows for submission of batched messages while the other hcall is limited to only one message. This protocol is defined in PAPR section 17.2.3.3. Previously, the ibmvnic xmit function only used the indirect hcall. This allowed the driver to batch it's skbs. A single skb can occupy a few entries per hcall depending on if FW requires skb header information or not. The FW only needs header information if the packet is segmented. By this logic, if an skb is not GSO then it can fit in one sub-crq message and therefore is a candidate for H_SEND_SUB_CRQ. Batching skb transmission is only useful when there are more packets coming down the line (ie netdev_xmit_more is true). As it turns out, H_SEND_SUB_CRQ induces less latency than H_SEND_SUB_CRQ_INDIRECT. Therefore, use H_SEND_SUB_CRQ where appropriate. Small latency gains seen when doing TCP_RR_150 (request/response workload). Ftrace results (graph-time=1): Previous: ibmvnic_xmit = 29618270.83 us / 8860058.0 hits = AVG 3.34 ibmvnic_tx_scrq_flush = 21972231.02 us / 6553972.0 hits = AVG 3.35 Now: ibmvnic_xmit = 22153350.96 us / 8438942.0 hits = AVG 2.63 ibmvnic_tx_scrq_flush = 15858922.4 us / 6244076.0 hits = AVG 2.54 Signed-off-by: Nick Child <nnac123@linux.ibm.com> Link: https://patch.msgid.link/20240807211809.1259563-6-nnac123@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: bdf5d13aa05e ("ibmvnic: Don't reference skb after sending to VIOS") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-27ibmvnic: Return error code on TX scrq flush failNick Child
[ Upstream commit 5cb431dcf8048572e9ffc6c30cdbd8832cbe502d ] In ibmvnic_xmit() if ibmvnic_tx_scrq_flush() returns H_CLOSED then it will inform upper level networking functions to disable tx queues. H_CLOSED signals that the connection with the vnic server is down and a transport event is expected to recover the device. Previously, ibmvnic_tx_scrq_flush() was hard-coded to return success. Therefore, the queues would remain active until ibmvnic_cleanup() is called within do_reset(). The problem is that do_reset() depends on the RTNL lock. If several ibmvnic devices are resetting then there can be a long wait time until the last device can grab the lock. During this time the tx/rx queues still appear active to upper level functions. FYI, we do make a call to netif_carrier_off() outside the RTNL lock but its calls to dev_deactivate() are also dependent on the RTNL lock. As a result, large amounts of retransmissions were observed in a short period of time, eventually leading to ETIMEOUT. This was specifically seen with HNV devices, likely because of even more RTNL dependencies. Therefore, ensure the return code of ibmvnic_tx_scrq_flush() is propagated to the xmit function to allow for an earlier (and lock-less) response to a transport event. Signed-off-by: Nick Child <nnac123@linux.ibm.com> Link: https://lore.kernel.org/r/20240416164128.387920-1-nnac123@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: bdf5d13aa05e ("ibmvnic: Don't reference skb after sending to VIOS") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw()Wentao Liang
commit fee5d688940690cc845937459e340e4e02598e90 upstream. Add a check for the return value of mlxsw_sp_port_get_stats_raw() in __mlxsw_sp_port_get_stats(). If mlxsw_sp_port_get_stats_raw() returns an error, exit the function to prevent further processing with potentially invalid data. Fixes: 614d509aa1e7 ("mlxsw: Move ethtool_ops to spectrum_ethtool.c") Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20250212152311.1332-1-vulab@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21igc: Set buffer type for empty frames in igc_init_empty_frameSong Yoong Siang
commit 63f20f00d23d569e4e67859b4e8dcc9de79221cb upstream. Set the buffer type to IGC_TX_BUFFER_TYPE_SKB for empty frame in the igc_init_empty_frame function. This ensures that the buffer type is correctly identified and handled during Tx ring cleanup. Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") Cc: stable@vger.kernel.org # 6.2+ Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17net: atlantic: fix warning during hot unplugJacob Moroni
[ Upstream commit 028676bb189ed6d1b550a0fc570a9d695b6acfd3 ] Firmware deinitialization performs MMIO accesses which are not necessary if the device has already been removed. In some cases, these accesses happen via readx_poll_timeout_atomic which ends up timing out, resulting in a warning at hw_atl2_utils_fw.c:112: [ 104.595913] Call Trace: [ 104.595915] <TASK> [ 104.595918] ? show_regs+0x6c/0x80 [ 104.595923] ? __warn+0x8d/0x150 [ 104.595925] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic] [ 104.595934] ? report_bug+0x182/0x1b0 [ 104.595938] ? handle_bug+0x6e/0xb0 [ 104.595940] ? exc_invalid_op+0x18/0x80 [ 104.595942] ? asm_exc_invalid_op+0x1b/0x20 [ 104.595944] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic] [ 104.595952] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic] [ 104.595959] aq_nic_deinit.part.0+0xbd/0xf0 [atlantic] [ 104.595964] aq_nic_deinit+0x17/0x30 [atlantic] [ 104.595970] aq_ndev_close+0x2b/0x40 [atlantic] [ 104.595975] __dev_close_many+0xad/0x160 [ 104.595978] dev_close_many+0x99/0x170 [ 104.595979] unregister_netdevice_many_notify+0x18b/0xb20 [ 104.595981] ? __call_rcu_common+0xcd/0x700 [ 104.595984] unregister_netdevice_queue+0xc6/0x110 [ 104.595986] unregister_netdev+0x1c/0x30 [ 104.595988] aq_pci_remove+0xb1/0xc0 [atlantic] Fix this by skipping firmware deinitialization altogether if the PCI device is no longer present. Tested with an AQC113 attached via Thunderbolt by performing repeated unplug cycles while traffic was running via iperf. Fixes: 97bde5c4f909 ("net: ethernet: aquantia: Support for NIC-specific code") Signed-off-by: Jacob Moroni <mail@jakemoroni.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250203143604.24930-3-mail@jakemoroni.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17tg3: Disable tg3 PCIe AER on system rebootLenny Szubowicz
[ Upstream commit e0efe83ed325277bb70f9435d4d9fc70bebdcca8 ] Disable PCIe AER on the tg3 device on system reboot on a limited list of Dell PowerEdge systems. This prevents a fatal PCIe AER event on the tg3 device during the ACPI _PTS (prepare to sleep) method for S5 on those systems. The _PTS is invoked by acpi_enter_sleep_state_prep() as part of the kernel's reboot sequence as a result of commit 38f34dba806a ("PM: ACPI: reboot: Reinstate S5 for reboot"). There was an earlier fix for this problem by commit 2ca1c94ce0b6 ("tg3: Disable tg3 device on system reboot to avoid triggering AER"). But it was discovered that this earlier fix caused a reboot hang when some Dell PowerEdge servers were booted via ipxe. To address this reboot hang, the earlier fix was essentially reverted by commit 9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF"). This re-exposed the tg3 PCIe AER on reboot problem. This fix is not an ideal solution because the root cause of the AER is in system firmware. Instead, it's a targeted work-around in the tg3 driver. Note also that the PCIe AER must be disabled on the tg3 device even if the system is configured to use "firmware first" error handling. V3: - Fix sparse warning on improper comparison of pdev->current_state - Adhere to netdev comment style Fixes: 9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF") Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17ice: Add check for devm_kzalloc()Jiasheng Jiang
[ Upstream commit a8aa6a6ddce9b5585f2b74f27f3feea1427fb4e7 ] Add check for the return value of devm_kzalloc() to guarantee the success of allocation. Fixes: 42c2eb6b1f43 ("ice: Implement devlink-rate API") Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250131013832.24805-1-jiashengjiangcool@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17net: bcmgenet: Correct overlaying of PHY and MAC Wake-on-LANFlorian Fainelli
[ Upstream commit 46ded709232344b5750a852747a8881763c721ab ] Some Wake-on-LAN modes such as WAKE_FILTER may only be supported by the MAC, while others might be only supported by the PHY. Make sure that the .get_wol() returns the union of both rather than only that of the PHY if the PHY supports Wake-on-LAN. When disabling Wake-on-LAN, make sure that this is done at both the PHY and MAC level, rather than doing an early return from the PHY driver. Fixes: 7e400ff35cbe ("net: bcmgenet: Add support for PHY-based Wake-on-LAN") Fixes: 9ee09edc05f2 ("net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250129231342.35013-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17ice: put Rx buffers after being done with current frameMaciej Fijalkowski
[ Upstream commit 743bbd93cf29f653fae0e1416a31f03231689911 ] Introduce a new helper ice_put_rx_mbuf() that will go through gathered frags from current frame and will call ice_put_rx_buf() on them. Current logic that was supposed to simplify and optimize the driver where we go through a batch of all buffers processed in current NAPI instance turned out to be broken for jumbo frames and very heavy load that was coming from both multi-thread iperf and nginx/wrk pair between server and client. The delay introduced by approach that we are dropping is simply too big and we need to take the decision regarding page recycling/releasing as quick as we can. While at it, address an error path of ice_add_xdp_frag() - we were missing buffer putting from day 1 there. As a nice side effect we get rid of annoying and repetitive three-liner: xdp->data = NULL; rx_ring->first_desc = ntc; rx_ring->nr_frags = 0; by embedding it within introduced routine. Fixes: 1dc1a7e7f410 ("ice: Centrallize Rx buffer recycling") Reported-and-tested-by: Xu Du <xudu@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17net/mlx5: use do_aux_work for PHC overflow checksVadim Fedorenko
[ Upstream commit e61e6c415ba9ff2b32bb6780ce1b17d1d76238f1 ] The overflow_work is using system wq to do overflow checks and updates for PHC device timecounter, which might be overhelmed by other tasks. But there is dedicated kthread in PTP subsystem designed for such things. This patch changes the work queue to proper align with PTP subsystem and to avoid overloading system work queue. The adjfine() function acts the same way as overflow check worker, we can postpone ptp aux worker till the next overflow period after adjfine() was called. Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250107104812.380225-1-vadfed@meta.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08net: sh_eth: Fix missing rtnl lock in suspend/resume pathKory Maincent
[ Upstream commit b95102215a8d0987789715ce11c0d4ec031cbfbe ] Fix the suspend/resume path by ensuring the rtnl lock is held where required. Calls to sh_eth_close, sh_eth_open and wol operations must be performed under the rtnl lock to prevent conflicts with ongoing ndo operations. Fixes: b71af04676e9 ("sh_eth: add more PM methods") Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08bgmac: reduce max frame size to support just MTU 1500Rafał Miłecki
[ Upstream commit 752e5fcc2e77358936d36ef8e522d6439372e201 ] bgmac allocates new replacement buffer before handling each received frame. Allocating & DMA-preparing 9724 B each time consumes a lot of CPU time. Ideally bgmac should just respect currently set MTU but it isn't the case right now. For now just revert back to the old limited frame size. This change bumps NAT masquerade speed by ~95%. Since commit 8218f62c9c9b ("mm: page_frag: use initial zero offset for page_frag_alloc_align()"), the bgmac driver fails to open its network interface successfully and runs out of memory in the following call stack: bgmac_open -> bgmac_dma_init -> bgmac_dma_rx_skb_for_slot -> netdev_alloc_frag BGMAC_RX_ALLOC_SIZE = 10048 and PAGE_FRAG_CACHE_MAX_SIZE = 32768. Eventually we land into __page_frag_alloc_align() with the following parameters across multiple successive calls: __page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=0 __page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=10048 __page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=20096 __page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=30144 So in that case we do indeed have offset + fragsz (40192) > size (32768) and so we would eventually return NULL. Reverting to the older 1500 bytes MTU allows the network driver to be usable again. Fixes: 8c7da63978f1 ("bgmac: configure MTU and add support for frames beyond 8192 byte size") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> [florian: expand commit message about recent commits] Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250127175159.1788246-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08net: stmmac: Limit FIFO size by hardware capabilityKunihiko Hayashi
[ Upstream commit 044f2fbaa2725696ecbf1f02ba7ab0a8ccb7e1ae ] Tx/Rx FIFO size is specified by the parameter "{tx,rx}-fifo-depth" from stmmac_platform layer. However, these values are constrained by upper limits determined by the capabilities of each hardware feature. There is a risk that the upper bits will be truncated due to the calculation, so it's appropriate to limit them to the upper limit values and display a warning message. This only works if the hardware capability has the upper limit values. Fixes: e7877f52fd4a ("stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08net: stmmac: Limit the number of MTL queues to hardware capabilityKunihiko Hayashi
[ Upstream commit f5fb35a3d6b36d378b2e2ecbfb9caa337d5428e6 ] The number of MTL queues to use is specified by the parameter "snps,{tx,rx}-queues-to-use" from stmmac_platform layer. However, the maximum numbers of queues are constrained by upper limits determined by the capability of each hardware feature. It's appropriate to limit the values not to exceed the upper limit values and display a warning message. This only works if the hardware capability has the upper limit values. Fixes: d976a525c371 ("net: stmmac: multiple queues dt configuration") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08net: davicom: fix UAF in dm9000_drv_removeChenyuan Yang
[ Upstream commit 19e65c45a1507a1a2926649d2db3583ed9d55fd9 ] dm is netdev private data and it cannot be used after free_netdev() call. Using dm after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. This is similar to the issue fixed in commit ad297cd2db89 ("net: qcom/emac: fix UAF in emac_remove"). This bug is detected by our static analysis tool. Fixes: cf9e60aa69ae ("net: davicom: Fix regulator not turned off on driver removal") Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> CC: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/20250123214213.623518-1-chenyuan0y@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08iavf: allow changing VLAN state without calling PFMichal Swiatkowski
[ Upstream commit ee7d79433d783346430ee32f28c9df44a88b3bb6 ] First case: > ip l a l $VF name vlanx type vlan id 100 > ip l d vlanx > ip l a l $VF name vlanx type vlan id 100 As workqueue can be execute after sometime, there is a window to have call trace like that: - iavf_del_vlan - iavf_add_vlan - iavf_del_vlans (wq) It means that our VLAN 100 will change the state from IAVF_VLAN_ACTIVE to IAVF_VLAN_REMOVE (iavf_del_vlan). After that in iavf_add_vlan state won't be changed because VLAN 100 is on the filter list. The final result is that the VLAN 100 filter isn't added in hardware (no iavf_add_vlans call). To fix that change the state if the filter wasn't removed yet directly to active. It is save as IAVF_VLAN_REMOVE means that virtchnl message wasn't sent yet. Second case: > ip l a l $VF name vlanx type vlan id 100 Any type of VF reset ex. change trust > ip l s $PF vf $VF_NUM trust on > ip l d vlanx > ip l a l $VF name vlanx type vlan id 100 In case of reset iavf driver is responsible for readding all filters that are being used. To do that all VLAN filters state are changed to IAVF_VLAN_ADD. Here is even longer window for changing VLAN state from kernel side, as workqueue isn't called immediately. We can have call trace like that: - changing to IAVF_VLAN_ADD (after reset) - iavf_del_vlan (called from kernel ops) - iavf_del_vlans (wq) Not exsisitng VLAN filters will be removed from hardware. It isn't a bug, ice driver will handle it fine. However, we can have call trace like that: - changing to IAVF_VLAN_ADD (after reset) - iavf_del_vlan (called from kernel ops) - iavf_add_vlan (called from kernel ops) - iavf_del_vlans (wq) With fix for previous case we end up with no VLAN filters in hardware. We have to remove VLAN filters if the state is IAVF_VLAN_ADD and delete VLAN was called. It is save as IAVF_VLAN_ADD means that virtchnl message wasn't sent yet. Fixes: 0c0da0e95105 ("iavf: refactor VLAN filter states") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08net: fec: implement TSO descriptor cleanupDheeraj Reddy Jonnalagadda
[ Upstream commit 61dc1fd9205bc9d9918aa933a847b08e80b4dc20 ] Implement cleanup of descriptors in the TSO error path of fec_enet_txq_submit_tso(). The cleanup - Unmaps DMA buffers for data descriptors skipping TSO header - Clears all buffer descriptors - Handles extended descriptors by clearing cbd_esc when enabled Fixes: 79f339125ea3 ("net: fec: Add software TSO support") Signed-off-by: Dheeraj Reddy Jonnalagadda <dheeraj.linuxdev@gmail.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20250120085430.99318-1-dheeraj.linuxdev@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08net: hns3: fix oops when unload drivers parallelingJian Shen
[ Upstream commit 92e5995773774a3e70257e9c95ea03518268bea5 ] When unload hclge driver, it tries to disable sriov first for each ae_dev node from hnae3_ae_dev_list. If user unloads hns3 driver at the time, because it removes all the ae_dev nodes, and it may cause oops. But we can't simply use hnae3_common_lock for this. Because in the process flow of pci_disable_sriov(), it will trigger the remove flow of VF, which will also take hnae3_common_lock. To fixes it, introduce a new mutex to protect the unload process. Fixes: 0dd8a25f355b ("net: hns3: disable sriov before unload hclge layer") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250118094741.3046663-1-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08net: ethernet: ti: am65-cpsw: fix freeing IRQ in am65_cpsw_nuss_remove_tx_chns()Roger Quadros
[ Upstream commit 4395a44acb15850e492dd1de9ec4b6479d96bc80 ] When getting the IRQ we use k3_udma_glue_tx_get_irq() which returns negative error value on error. So not NULL check is not sufficient to deteremine if IRQ is valid. Check that IRQ is greater then zero to ensure it is valid. There is no issue at probe time but at runtime user can invoke .set_channels which results in the following call chain. am65_cpsw_set_channels() am65_cpsw_nuss_update_tx_rx_chns() am65_cpsw_nuss_remove_tx_chns() am65_cpsw_nuss_init_tx_chns() At this point if am65_cpsw_nuss_init_tx_chns() fails due to k3_udma_glue_tx_get_irq() then tx_chn->irq will be set to a negative value. Then, at subsequent .set_channels with higher channel count we will attempt to free an invalid IRQ in am65_cpsw_nuss_remove_tx_chns() leading to a kernel warning. The issue is present in the original commit that introduced this driver, although there, am65_cpsw_nuss_update_tx_rx_chns() existed as am65_cpsw_nuss_update_tx_chns(). Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08octeon_ep: remove firmware stats fetch in ndo_get_stats64Shinas Rasheed
[ Upstream commit 1f64255bb76c11d0c41a7d81d7cec68e49d5362d ] The firmware stats fetch call that happens in ndo_get_stats64() is currently not required, and causes a warning to issue. The warn log is given below: [ 123.316837] ------------[ cut here ]------------ [ 123.316840] Voluntary context switch within RCU read-side critical section! [ 123.316917] pc : rcu_note_context_switch+0x2e4/0x300 [ 123.316919] lr : rcu_note_context_switch+0x2e4/0x300 [ 123.316947] Call trace: [ 123.316949] rcu_note_context_switch+0x2e4/0x300 [ 123.316952] __schedule+0x84/0x584 [ 123.316955] schedule+0x38/0x90 [ 123.316956] schedule_timeout+0xa0/0x1d4 [ 123.316959] octep_send_mbox_req+0x190/0x230 [octeon_ep] [ 123.316966] octep_ctrl_net_get_if_stats+0x78/0x100 [octeon_ep] [ 123.316970] octep_get_stats64+0xd4/0xf0 [octeon_ep] [ 123.316975] dev_get_stats+0x4c/0x114 [ 123.316977] dev_seq_printf_stats+0x3c/0x11c [ 123.316980] dev_seq_show+0x1c/0x40 [ 123.316982] seq_read_iter+0x3cc/0x4e0 [ 123.316985] seq_read+0xc8/0x110 [ 123.316987] proc_reg_read+0x9c/0xec [ 123.316990] vfs_read+0xc8/0x2ec [ 123.316993] ksys_read+0x70/0x100 [ 123.316995] __arm64_sys_read+0x20/0x30 [ 123.316997] invoke_syscall.constprop.0+0x7c/0xd0 [ 123.317000] do_el0_svc+0xb4/0xd0 [ 123.317002] el0_svc+0xe8/0x1f4 [ 123.317005] el0t_64_sync_handler+0x134/0x150 [ 123.317006] el0t_64_sync+0x17c/0x180 [ 123.317008] ---[ end trace 63399811432ab69b ]--- Fixes: 6a610a46bad1 ("octeon_ep: add support for ndo ops") Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://patch.msgid.link/20250117094653.2588578-2-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08net/mlxfw: Drop hard coded max FW flash image sizeMaher Sanalla
[ Upstream commit 70d81f25cc92cc4e914516c9935ae752f27d78ad ] Currently, mlxfw kernel module limits FW flash image size to be 10MB at most, preventing the ability to burn recent BlueField-3 FW that exceeds the said size limit. Thus, drop the hard coded limit. Instead, rely on FW's max_component_size threshold that is reported in MCQI register as the size limit for FW image. Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/1737030796-1441634-1-git-send-email-moshe@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08inet: ipmr: fix data-racesEric Dumazet
[ Upstream commit 3440fa34ad99d471f1085bc2f4dedeaebc310261 ] Following fields of 'struct mr_mfc' can be updated concurrently (no lock protection) from ip_mr_forward() and ip6_mr_forward() - bytes - pkt - wrong_if - lastuse They also can be read from other functions. Convert bytes, pkt and wrong_if to atomic_long_t, and use READ_ONCE()/WRITE_ONCE() for lastuse. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250114221049.1190631-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-23net: ethernet: xgbe: re-add aneg to supported features in PHY quirksHeiner Kallweit
commit 6be7aca91009865d8c2b73589270224a6b6e67ab upstream. In 4.19, before the switch to linkmode bitmaps, PHY_GBIT_FEATURES included feature bits for aneg and TP/MII ports. SUPPORTED_TP | \ SUPPORTED_MII) SUPPORTED_10baseT_Full) SUPPORTED_100baseT_Full) SUPPORTED_1000baseT_Full) PHY_100BT_FEATURES | \ PHY_DEFAULT_FEATURES) PHY_1000BT_FEATURES) Referenced commit expanded PHY_GBIT_FEATURES, silently removing PHY_DEFAULT_FEATURES. The removed part can be re-added by using the new PHY_GBIT_FEATURES definition. Not clear to me is why nobody seems to have noticed this issue. I stumbled across this when checking what it takes to make phy_10_100_features_array et al private to phylib. Fixes: d0939c26c53a ("net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/46521973-7738-4157-9f5e-0bb6f694acba@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-23net/mlx5e: Always start IPsec sequence number from 1Leon Romanovsky
[ Upstream commit 7f95b0247764acd739d949ff247db4b76138e55a ] According to RFC4303, section "3.3.3. Sequence Number Generation", the first packet sent using a given SA will contain a sequence number of 1. This is applicable to both ESN and non-ESN mode, which was not covered in commit mentioned in Fixes line. Fixes: 3d42c8cc67a8 ("net/mlx5e: Ensure that IPsec sequence packet number starts from 1") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-23net/mlx5e: Rely on reqid in IPsec tunnel modeLeon Romanovsky
[ Upstream commit 25f23524dfa227959beb3b2c2c0f38e0222f4cfa ] All packet offloads SAs have reqid in it to make sure they have corresponding policy. While it is not strictly needed for transparent mode, it is extremely important in tunnel mode. In that mode, policy and SAs have different match criteria. Policy catches the whole subnet addresses, and SA catches the tunnel gateways addresses. The source address of such tunnel is not known during egress packet traversal in flow steering as it is added only after successful encryption. As reqid is required for packet offload and it is unique for every SA, we can safely rely on it only. The output below shows the configured egress policy and SA by strongswan: [leonro@vm ~]$ sudo ip x s src 192.169.101.2 dst 192.169.101.1 proto esp spi 0xc88b7652 reqid 1 mode tunnel replay-window 0 flag af-unspec esn aead rfc4106(gcm(aes)) 0xe406a01083986e14d116488549094710e9c57bc6 128 anti-replay esn context: seq-hi 0x0, seq 0x0, oseq-hi 0x0, oseq 0x0 replay_window 1, bitmap-length 1 00000000 crypto offload parameters: dev eth2 dir out mode packet [leonro@064 ~]$ sudo ip x p src 192.170.0.0/16 dst 192.170.0.0/16 dir out priority 383615 ptype main tmpl src 192.169.101.2 dst 192.169.101.1 proto esp spi 0xc88b7652 reqid 1 mode tunnel crypto offload parameters: dev eth2 mode packet Fixes: b3beba1fb404 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-23net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnelLeon Romanovsky
[ Upstream commit 2c3688090f8a1f085230aa839cc63e4a7b977df0 ] Attempt to enable IPsec packet offload in tunnel mode in debug kernel generates the following kernel panic, which is happening due to two issues: 1. In SA add section, the should be _bh() variant when marking SA mode. 2. There is not needed flush_workqueue in SA delete routine. It is not needed as at this stage as it is removed from SADB and the running work will be canceled later in SA free. ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected 6.12.0+ #4 Not tainted ----------------------------------------------------- charon/1337 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire: ffff88810f365020 (&xa->xa_lock#24){+.+.}-{3:3}, at: mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] and this task is already holding: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30 which would create a new lock dependency: (&x->lock){+.-.}-{3:3} -> (&xa->xa_lock#24){+.+.}-{3:3} but this new dependency connects a SOFTIRQ-irq-safe lock: (&x->lock){+.-.}-{3:3} ... which became SOFTIRQ-irq-safe at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_timer_handler+0x91/0xd70 __hrtimer_run_queues+0x1dd/0xa60 hrtimer_run_softirq+0x146/0x2e0 handle_softirqs+0x266/0x860 irq_exit_rcu+0x115/0x1a0 sysvec_apic_timer_interrupt+0x6e/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 default_idle+0x13/0x20 default_idle_call+0x67/0xa0 do_idle+0x2da/0x320 cpu_startup_entry+0x50/0x60 start_secondary+0x213/0x2a0 common_startup_64+0x129/0x138 to a SOFTIRQ-irq-unsafe lock: (&xa->xa_lock#24){+.+.}-{3:3} ... which became SOFTIRQ-irq-unsafe at: ... lock_acquire+0x1be/0x520 _raw_spin_lock+0x2c/0x40 xa_set_mark+0x70/0x110 mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&xa->xa_lock#24); local_irq_disable(); lock(&x->lock); lock(&xa->xa_lock#24); <Interrupt> lock(&x->lock); *** DEADLOCK *** 2 locks held by charon/1337: #0: ffffffff87f8f858 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{4:4}, at: xfrm_netlink_rcv+0x5e/0x90 #1: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30 the dependencies between SOFTIRQ-irq-safe lock and the holding lock: -> (&x->lock){+.-.}-{3:3} ops: 29 { HARDIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_alloc_spi+0xc0/0xe60 xfrm_alloc_userspi+0x5f6/0xbc0 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 IN-SOFTIRQ-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_timer_handler+0x91/0xd70 __hrtimer_run_queues+0x1dd/0xa60 hrtimer_run_softirq+0x146/0x2e0 handle_softirqs+0x266/0x860 irq_exit_rcu+0x115/0x1a0 sysvec_apic_timer_interrupt+0x6e/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 default_idle+0x13/0x20 default_idle_call+0x67/0xa0 do_idle+0x2da/0x320 cpu_startup_entry+0x50/0x60 start_secondary+0x213/0x2a0 common_startup_64+0x129/0x138 INITIAL USE at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_alloc_spi+0xc0/0xe60 xfrm_alloc_userspi+0x5f6/0xbc0 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 } ... key at: [<ffffffff87f9cd20>] __key.18+0x0/0x40 the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: -> (&xa->xa_lock#24){+.+.}-{3:3} ops: 9 { HARDIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 SOFTIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock+0x2c/0x40 xa_set_mark+0x70/0x110 mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 INITIAL USE at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 } ... key at: [<ffffffffa078ff60>] __key.48+0x0/0xfffffffffff210a0 [mlx5_core] ... acquired at: __lock_acquire+0x30a0/0x5040 lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] xfrm_dev_state_delete+0x90/0x160 __xfrm_state_delete+0x662/0xae0 xfrm_state_delete+0x1e/0x30 xfrm_del_sa+0x1c2/0x340 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 stack backtrace: CPU: 7 UID: 0 PID: 1337 Comm: charon Not tainted 6.12.0+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x74/0xd0 check_irq_usage+0x12e8/0x1d90 ? print_shortest_lock_dependencies_backwards+0x1b0/0x1b0 ? check_chain_key+0x1bb/0x4c0 ? __lockdep_reset_lock+0x180/0x180 ? check_path.constprop.0+0x24/0x50 ? mark_lock+0x108/0x2fb0 ? print_circular_bug+0x9b0/0x9b0 ? mark_lock+0x108/0x2fb0 ? print_usage_bug.part.0+0x670/0x670 ? check_prev_add+0x1c4/0x2310 check_prev_add+0x1c4/0x2310 __lock_acquire+0x30a0/0x5040 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? lockdep_set_lock_cmp_fn+0x190/0x190 lock_acquire+0x1be/0x520 ? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? __xfrm_state_delete+0x5f0/0xae0 ? lock_downgrade+0x6b0/0x6b0 _raw_spin_lock_bh+0x34/0x40 ? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] xfrm_dev_state_delete+0x90/0x160 __xfrm_state_delete+0x662/0xae0 xfrm_state_delete+0x1e/0x30 xfrm_del_sa+0x1c2/0x340 ? xfrm_get_sa+0x250/0x250 ? check_chain_key+0x1bb/0x4c0 xfrm_user_rcv_msg+0x493/0x880 ? copy_sec_ctx+0x270/0x270 ? check_chain_key+0x1bb/0x4c0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? lockdep_set_lock_cmp_fn+0x190/0x190 netlink_rcv_skb+0x12e/0x380 ? copy_sec_ctx+0x270/0x270 ? netlink_ack+0xd90/0xd90 ? netlink_deliver_tap+0xcd/0xb60 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 ? netlink_attachskb+0x730/0x730 ? lock_acquire+0x1be/0x520 netlink_sendmsg+0x745/0xbe0 ? netlink_unicast+0x740/0x740 ? __might_fault+0xbb/0x170 ? netlink_unicast+0x740/0x740 __sock_sendmsg+0xc5/0x190 ? fdget+0x163/0x1d0 __sys_sendto+0x1fe/0x2c0 ? __x64_sys_getpeername+0xb0/0xb0 ? do_user_addr_fault+0x856/0xe30 ? lock_acquire+0x1be/0x520 ? __task_pid_nr_ns+0x117/0x410 ? lock_downgrade+0x6b0/0x6b0 __x64_sys_sendto+0xdc/0x1b0 ? lockdep_hardirqs_on_prepare+0x284/0x400 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f7d31291ba4 Code: 7d e8 89 4d d4 e8 4c 42 f7 ff 44 8b 4d d0 4c 8b 45 c8 89 c3 44 8b 55 d4 8b 7d e8 b8 2c 00 00 00 48 8b 55 d8 48 8b 75 e0 0f 05 <48> 3d 00 f0 ff ff 77 34 89 df 48 89 45 e8 e8 99 42 f7 ff 48 8b 45 RSP: 002b:00007f7d2ccd94f0 EFLAGS: 00000297 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f7d31291ba4 RDX: 0000000000000028 RSI: 00007f7d2ccd96a0 RDI: 000000000000000a RBP: 00007f7d2ccd9530 R08: 00007f7d2ccd9598 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000297 R12: 0000000000000028 R13: 00007f7d2ccd9598 R14: 00007f7d2ccd96a0 R15: 00000000000000e1 </TASK> Fixes: 4c24272b4e2b ("net/mlx5e: Listen to ARP events to update IPsec L2 headers in tunnel mode") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-23net/mlx5: Clear port select structure when fail to createMark Zhang
[ Upstream commit 5641e82cb55b4ecbc6366a499300917d2f3e6790 ] Clear the port select structure on error so no stale values left after definers are destroyed. That's because the mlx5_lag_destroy_definers() always try to destroy all lag definers in the tt_map, so in the flow below lag definers get double-destroyed and cause kernel crash: mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 1 mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 0 mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00 [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)] CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] sp : ffff800085fafb00 x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000 x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000 x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000 x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350 x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0 x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190 x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000 Call trace: mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core] mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core] mlx5_activate_lag+0x60c/0x6f8 [mlx5_core] mlx5_do_bond_work+0x284/0x5c8 [mlx5_core] process_one_work+0x170/0x3e0 worker_thread+0x2d8/0x3e0 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400) ---[ end trace 0000000000000000 ]--- Fixes: dc48516ec7d3 ("net/mlx5: Lag, add support to create definers for LAG") Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-23net/mlx5: Fix RDMA TX steering prioPatrisious Haddad
[ Upstream commit c08d3e62b2e73e14da318a1d20b52d0486a28ee0 ] User added steering rules at RDMA_TX were being added to the first prio, which is the counters prio. Fix that so that they are correctly added to the BYPASS_PRIO instead. Fixes: 24670b1a3166 ("net/mlx5: Add support for RDMA TX steering") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-23net: fec: handle page_pool_dev_alloc_pages errorKevin Groeneveld
[ Upstream commit 001ba0902046cb6c352494df610718c0763e77a5 ] The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did not handle the case when it returned NULL. There was a WARN_ON(!new_page) but it would still proceed to use the NULL pointer and then crash. This case does seem somewhat rare but when the system is under memory pressure it can happen. One case where I can duplicate this with some frequency is when writing over a smbd share to a SATA HDD attached to an imx6q. Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve the problem for my test case. But it still seems wrong that the fec driver ignores the memory allocation error and can crash. This commit handles the allocation error by dropping the current packet. Fixes: 95698ff6177b5 ("net: fec: using page pool to manage RX buffers") Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20250113154846.1765414-1-kgroeneveld@lenbrook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-23net: xilinx: axienet: Fix IRQ coalescing packet count overflowSean Anderson
[ Upstream commit c17ff476f53afb30f90bb3c2af77de069c81a622 ] If coalesce_count is greater than 255 it will not fit in the register and will overflow. This can be reproduced by running # ethtool -C ethX rx-frames 256 which will result in a timeout of 0us instead. Fix this by checking for invalid values and reporting an error. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://patch.msgid.link/20250113163001.2335235-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-23nfp: bpf: prevent integer overflow in nfp_bpf_event_output()Dan Carpenter
[ Upstream commit 16ebb6f5b6295c9688749862a39a4889c56227f8 ] The "sizeof(struct cmsg_bpf_event) + pkt_size + data_size" math could potentially have an integer wrapping bug on 32bit systems. Check for this and return an error. Fixes: 9816dd35ecec ("nfp: bpf: perf event output helpers support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/6074805b-e78d-4b8a-bf05-e929b5377c28@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 04:45:03 +0000