summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2024-09-18net: dpaa: Pad packets to ETH_ZLENSean Anderson
[ Upstream commit cbd7ec083413c6a2e0c326d49e24ec7d12c7a9e0 ] When sending packets under 60 bytes, up to three bytes of the buffer following the data may be leaked. Avoid this by extending all packets to ETH_ZLEN, ensuring nothing is leaked in the padding. This bug can be reproduced by running $ ping -s 11 destination Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240910143144.1439910-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18net: ftgmac100: Enable TX interrupt to avoid TX timeoutJacky Chou
[ Upstream commit fef2843bb49f414d1523ca007d088071dee0e055 ] Currently, the driver only enables RX interrupt to handle RX packets and TX resources. Sometimes there is not RX traffic, so the TX resource needs to wait for RX interrupt to free. This situation will toggle the TX timeout watchdog when the MAC TX ring has no more resources to transmit packets. Therefore, enable TX interrupt to release TX resources at any time. When I am verifying iperf3 over UDP, the network hangs. Like the log below. root# iperf3 -c 192.168.100.100 -i1 -t10 -u -b0 Connecting to host 192.168.100.100, port 5201 [ 4] local 192.168.100.101 port 35773 connected to 192.168.100.100 port 5201 [ ID] Interval Transfer Bandwidth Total Datagrams [ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 20 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 0.000 ms 0/20 (0%) [ 4] Sent 20 datagrams iperf3: error - the server has terminated The network topology is FTGMAC connects directly to a PC. UDP does not need to wait for ACK, unlike TCP. Therefore, FTGMAC needs to enable TX interrupt to release TX resources instead of waiting for the RX interrupt. Fixes: 10cbd6407609 ("ftgmac100: Rework NAPI & interrupts handling") Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com> Link: https://patch.msgid.link/20240906062831.2243399-1-jacky_chou@aspeedtech.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18octeontx2-af: Modify SMQ flush sequence to drop packetsNaveen Mamindlapalli
[ Upstream commit 019aba04f08c2102b35ce7fee9d4628d349f56c0 ] The current implementation of SMQ flush sequence waits for the packets in the TM pipeline to be transmitted out of the link. This sequence doesn't succeed in HW when there is any issue with link such as lack of link credits, link down or any other traffic that is fully occupying the link bandwidth (QoS). This patch modifies the SMQ flush sequence to drop the packets after TL1 level (SQM) instead of polling for the packets to be sent out of RPM/CGX link. Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology") Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Link: https://patch.msgid.link/20240906045838.1620308-1-naveenm@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18net/mlx5: Fix bridge mode operations when there are no VFsBenjamin Poirier
[ Upstream commit b1d305abef4640af1b4f1b4774d513cd81b10cfc ] Currently, trying to set the bridge mode attribute when numvfs=0 leads to a crash: bridge link set dev eth2 hwmode vepa [ 168.967392] BUG: kernel NULL pointer dereference, address: 0000000000000030 [...] [ 168.969989] RIP: 0010:mlx5_add_flow_rules+0x1f/0x300 [mlx5_core] [...] [ 168.976037] Call Trace: [ 168.976188] <TASK> [ 168.978620] _mlx5_eswitch_set_vepa_locked+0x113/0x230 [mlx5_core] [ 168.979074] mlx5_eswitch_set_vepa+0x7f/0xa0 [mlx5_core] [ 168.979471] rtnl_bridge_setlink+0xe9/0x1f0 [ 168.979714] rtnetlink_rcv_msg+0x159/0x400 [ 168.980451] netlink_rcv_skb+0x54/0x100 [ 168.980675] netlink_unicast+0x241/0x360 [ 168.980918] netlink_sendmsg+0x1f6/0x430 [ 168.981162] ____sys_sendmsg+0x3bb/0x3f0 [ 168.982155] ___sys_sendmsg+0x88/0xd0 [ 168.985036] __sys_sendmsg+0x59/0xa0 [ 168.985477] do_syscall_64+0x79/0x150 [ 168.987273] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 168.987773] RIP: 0033:0x7f8f7950f917 (esw->fdb_table.legacy.vepa_fdb is null) The bridge mode is only relevant when there are multiple functions per port. Therefore, prevent setting and getting this setting when there are no VFs. Note that after this change, there are no settings to change on the PF interface using `bridge link` when there are no VFs, so the interface no longer appears in the `bridge link` output. Fixes: 4b89251de024 ("net/mlx5: Support ndo bridge_setlink and getlink") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18net/mlx5: Verify support for scheduling element and TSAR typeCarolina Jubran
[ Upstream commit 861cd9b9cb62feb244b8d77e68fd6ddedbbf66e9 ] Before creating a scheduling element in a NIC or E-Switch scheduler, ensure that the requested element type is supported. If the element is of type Transmit Scheduling Arbiter (TSAR), also verify that the specific TSAR type is supported. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Fixes: 85c5f7c9200e ("net/mlx5: E-switch, Create QoS on demand") Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18net/mlx5: Correct TASR typo into TSARCosmin Ratiu
[ Upstream commit e575d3a6dd22123888defb622b1742aa2d45b942 ] TSAR is the correct spelling (Transmit Scheduling ARbiter). Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240613210036.1125203-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 861cd9b9cb62 ("net/mlx5: Verify support for scheduling element and TSAR type") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18net/mlx5: Explicitly set scheduling element and TSAR typeCarolina Jubran
[ Upstream commit c88146abe4d0f8cf659b2b8883fdc33936d2e3b8 ] Ensure the scheduling element type and TSAR type are explicitly initialized in the QoS rate group creation. This prevents potential issues due to default values. Fixes: 1ae258f8b343 ("net/mlx5: E-switch, Introduce rate limiting groups API") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18net/mlx5e: Add missing link mode to ptys2ext_ethtool_mapShahar Shitrit
[ Upstream commit 80bf474242b21d64a514fd2bb65faa7a17ca8d8d ] Add MLX5E_400GAUI_8_400GBASE_CR8 to the extended modes in ptys2ext_ethtool_table, since it was missing. Fixes: 6a897372417e ("net/mlx5: ethtool, Add ethtool support for 50Gbps per lane link modes") Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18IB/mlx5: Rename 400G_8X speed to comply to naming conventionPatrisious Haddad
[ Upstream commit b28ad32442bec2f0d9cb660d7d698a1a53c13d08 ] Rename 400G_8X speed to comply to naming convention. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Link: https://lore.kernel.org/r/ac98447cac8379a43fbdb36d56e5fb2b741a97ff.1695204156.git.leon@kernel.org Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Stable-dep-of: 80bf474242b2 ("net/mlx5e: Add missing link mode to ptys2ext_ethtool_map") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18net/mlx5e: Add missing link modes to ptys2ethtool_mapShahar Shitrit
[ Upstream commit 7617d62cba4a8a3ff3ed3fda0171c43f135c142e ] Add MLX5E_1000BASE_T and MLX5E_100BASE_TX to the legacy modes in ptys2legacy_ethtool_table, since they were missing. Fixes: 665bc53969d7 ("net/mlx5e: Use new ethtool get/set link ksettings API") Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18net/mlx5: Update the list of the PCI supported devicesMaher Sanalla
[ Upstream commit 7472d157cb8014103105433bcc0705af2e6f7184 ] Add the upcoming ConnectX-9 device ID to the table of supported PCI device IDs. Fixes: f908a35b2218 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18igb: Always call igb_xdp_ring_update_tail() under Tx lockSriram Yagnaraman
[ Upstream commit 27717f8b17c098c4373ddb8fe89e1a1899c7779d ] Always call igb_xdp_ring_update_tail() under __netif_tx_lock, add a comment and lockdep assert to indicate that. This is needed to share the same TX ring between XDP, XSK and slow paths. Furthermore, the current XDP implementation is racy on tail updates. Fixes: 9cbc948b5a20 ("igb: add XDP support") Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> [Kurt: Add lockdep assert and fixes tag] Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18ice: fix VSI lists confusion when adding VLANsMichal Schmidt
[ Upstream commit d2940002b0aa42898de815a1453b29d440292386 ] The description of function ice_find_vsi_list_entry says: Search VSI list map with VSI count 1 However, since the blamed commit (see Fixes below), the function no longer checks vsi_count. This causes a problem in ice_add_vlan_internal, where the decision to share VSI lists between filter rules relies on the vsi_count of the found existing VSI list being 1. The reproducing steps: 1. Have a PF and two VFs. There will be a filter rule for VLAN 0, referring to a VSI list containing VSIs: 0 (PF), 2 (VF#0), 3 (VF#1). 2. Add VLAN 1234 to VF#0. ice will make the wrong decision to share the VSI list with the new rule. The wrong behavior may not be immediately apparent, but it can be observed with debug prints. 3. Add VLAN 1234 to VF#1. ice will unshare the VSI list for the VLAN 1234 rule. Due to the earlier bad decision, the newly created VSI list will contain VSIs 0 (PF) and 3 (VF#1), instead of expected 2 (VF#0) and 3 (VF#1). 4. Try pinging a network peer over the VLAN interface on VF#0. This fails. Reproducer script at: https://gitlab.com/mschmidt2/repro/-/blob/master/RHEL-46814/test-vlan-vsi-list-confusion.sh Commented debug trace: https://gitlab.com/mschmidt2/repro/-/blob/master/RHEL-46814/ice-vlan-vsi-lists-debug.txt Patch adding the debug prints: https://gitlab.com/mschmidt2/linux/-/commit/f8a8814623944a45091a77c6094c40bfe726bfdb (Unsafe, by the way. Lacks rule_lock when dumping in ice_remove_vlan.) Michal Swiatkowski added to the explanation that the bug is caused by reusing a VSI list created for VLAN 0. All created VFs' VSIs are added to VLAN 0 filter. When a non-zero VLAN is created on a VF which is already in VLAN 0 (normal case), the VSI list from VLAN 0 is reused. It leads to a problem because all VFs (VSIs to be specific) that are subscribed to VLAN 0 will now receive a new VLAN tag traffic. This is one bug, another is the bug described above. Removing filters from one VF will remove VLAN filter from the previous VF. It happens a VF is reset. Example: - creation of 3 VFs - we have VSI list (used for VLAN 0) [0 (pf), 2 (vf1), 3 (vf2), 4 (vf3)] - we are adding VLAN 100 on VF1, we are reusing the previous list because 2 is there - VLAN traffic works fine, but VLAN 100 tagged traffic can be received on all VSIs from the list (for example broadcast or unicast) - trust is turning on VF2, VF2 is resetting, all filters from VF2 are removed; the VLAN 100 filter is also removed because 3 is on the list - VLAN traffic to VF1 isn't working anymore, there is a need to recreate VLAN interface to readd VLAN filter One thing I'm not certain about is the implications for the LAG feature, which is another caller of ice_find_vsi_list_entry. I don't have a LAG-capable card at hand to test. Fixes: 23ccae5ce15f ("ice: changes to the interface with the HW and FW for SRIOV_VF+LAG") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Dave Ertman <David.m.ertman@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18ice: fix accounting for filters shared by multiple VSIsJacob Keller
[ Upstream commit e843cf7b34fe2e0c1afc55e1f3057375c9b77a14 ] When adding a switch filter (such as a MAC or VLAN filter), it is expected that the driver will detect the case where the filter already exists, and return -EEXIST. This is used by calling code such as ice_vc_add_mac_addr, and ice_vsi_add_vlan to avoid incrementing the accounting fields such as vsi->num_vlan or vf->num_mac. This logic works correctly for the case where only a single VSI has added a given switch filter. When a second VSI adds the same switch filter, the driver converts the existing filter from an ICE_FWD_TO_VSI filter into an ICE_FWD_TO_VSI_LIST filter. This saves switch resources, by ensuring that multiple VSIs can re-use the same filter. The ice_add_update_vsi_list() function is responsible for doing this conversion. When first converting a filter from the FWD_TO_VSI into FWD_TO_VSI_LIST, it checks if the VSI being added is the same as the existing rule's VSI. In such a case it returns -EEXIST. However, when the switch rule has already been converted to a FWD_TO_VSI_LIST, the logic is different. Adding a new VSI in this case just requires extending the VSI list entry. The logic for checking if the rule already exists in this case returns 0 instead of -EEXIST. This breaks the accounting logic mentioned above, so the counters for how many MAC and VLAN filters exist for a given VF or VSI no longer accurately reflect the actual count. This breaks other code which relies on these counts. In typical usage this primarily affects such filters generally shared by multiple VSIs such as VLAN 0, or broadcast and multicast MAC addresses. Fix this by correctly reporting -EEXIST in the case of adding the same VSI to a switch rule already converted to ICE_FWD_TO_VSI_LIST. Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18ice: Fix lldp packets dropping after changing the number of channelsMartyna Szapar-Mudlaw
[ Upstream commit 9debb703e14939dfafa5d403f27c4feb2e9f6501 ] After vsi setup refactor commit 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") ice_cfg_sw_lldp function which removes rx rule directing LLDP packets to vsi is moved from ice_vsi_release to ice_vsi_decfg function. ice_vsi_decfg is used in more cases than just in vsi_release resulting in unnecessary removal of rx lldp packets handling switch rule. This leads to lldp packets being dropped after a change number of channels via ethtool. This patch moves ice_cfg_sw_lldp function that removes rx lldp sw rule back to ice_vsi_release function. Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Reported-by: Matěj Grégr <mgregr@netx.as> Closes: https://lore.kernel.org/intel-wired-lan/1be45a76-90af-4813-824f-8398b69745a9@netx.as/T/#u Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18net: xilinx: axienet: Fix race in axienet_stopSean Anderson
commit 858430db28a5f5a11f8faa3a6fa805438e6f0851 upstream. axienet_dma_err_handler can race with axienet_stop in the following manner: CPU 1 CPU 2 ====================== ================== axienet_stop() napi_disable() axienet_dma_stop() axienet_dma_err_handler() napi_disable() axienet_dma_stop() axienet_dma_start() napi_enable() cancel_work_sync() free_irq() Fix this by setting a flag in axienet_stop telling axienet_dma_err_handler not to bother doing anything. I chose not to use disable_work_sync to allow for easier backporting. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Link: https://patch.msgid.link/20240903175141.4132898-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Adjusted to apply before dmaengine support ] Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-18net: hns3: use correct release function during uninitializationPeiyang Wang
[ Upstream commit 7660833d217528c8f2385528951ab820a031e4e3 ] pci_request_regions is called to apply for PCI I/O and memory resources when the driver is initialized, Therefore, when the driver is uninstalled, pci_release_regions should be used to release PCI I/O and memory resources instead of pci_release_mem_regions is used to release memory reasouces only. Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-18net: ethernet: use ip_hdrlen() instead of bit shiftMoon Yeounsu
[ Upstream commit 9a039eeb71a42c8b13408a1976e300f3898e1be0 ] `ip_hdr(skb)->ihl << 2` is the same as `ip_hdrlen(skb)` Therefore, we should use a well-defined function not a bit shift to find the header length. It also compresses two lines to a single line. Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com> Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12intel: legacy: Partial revert of field get conversionSasha Neftin
commit ba54b1a276a6b69d80649942fe5334d19851443e upstream. Refactoring of the field get conversion introduced a regression in the legacy Wake On Lan from a magic packet with i219 devices. Rx address copied not correctly from MAC to PHY with FIELD_GET macro. Fixes: b9a452545075 ("intel: legacy: field get conversion") Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Florian Larysch <fl@n621.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12net: dpaa: avoid on-stack arrays of NR_CPUS elementsVladimir Oltean
[ Upstream commit 555a05d84ca2c587e2d4777006e2c2fb3dfbd91d ] The dpaa-eth driver is written for PowerPC and Arm SoCs which have 1-24 CPUs. It depends on CONFIG_NR_CPUS having a reasonably small value in Kconfig. Otherwise, there are 2 functions which allocate on-stack arrays of NR_CPUS elements, and these can quickly explode in size, leading to warnings such as: drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:3280:12: warning: stack frame size (16664) exceeds limit (2048) in 'dpaa_eth_probe' [-Wframe-larger-than] The problem is twofold: - Reducing the array size to the boot-time num_possible_cpus() (rather than the compile-time NR_CPUS) creates a variable-length array, which should be avoided in the Linux kernel. - Using NR_CPUS as an array size makes the driver blow up in stack consumption with generic, as opposed to hand-crafted, .config files. A simple solution is to use dynamic allocation for num_possible_cpus() elements (aka a small number determined at runtime). Link: https://lore.kernel.org/all/202406261920.l5pzM1rj-lkp@intel.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Breno Leitao <leitao@debian.org> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Link: https://patch.msgid.link/20240713225336.1746343-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12ice: do not bring the VSI up, if it was down before the XDP setupLarysa Zaremba
[ Upstream commit 04c7e14e5b0b6227e7b00d7a96ca2f2426ab9171 ] After XDP configuration is completed, we bring the interface up unconditionally, regardless of its state before the call to .ndo_bpf(). Preserve the information whether the interface had to be brought down and later bring it up only in such case. Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12ice: protect XDP configuration with a mutexLarysa Zaremba
[ Upstream commit 2504b8405768a57a71e660dbfd5abd59f679a03f ] The main threat to data consistency in ice_xdp() is a possible asynchronous PF reset. It can be triggered by a user or by TX timeout handler. XDP setup and PF reset code access the same resources in the following sections: * ice_vsi_close() in ice_prepare_for_reset() - already rtnl-locked * ice_vsi_rebuild() for the PF VSI - not protected * ice_vsi_open() - already rtnl-locked With an unfortunate timing, such accesses can result in a crash such as the one below: [ +1.999878] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 14 [ +2.002992] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 18 [Mar15 18:17] ice 0000:b1:00.0 ens801f0np0: NETDEV WATCHDOG: CPU: 38: transmit queue 14 timed out 80692736 ms [ +0.000093] ice 0000:b1:00.0 ens801f0np0: tx_timeout: VSI_num: 6, Q 14, NTC: 0x0, HW_HEAD: 0x0, NTU: 0x0, INT: 0x4000001 [ +0.000012] ice 0000:b1:00.0 ens801f0np0: tx_timeout recovery level 1, txqueue 14 [ +0.394718] ice 0000:b1:00.0: PTP reset successful [ +0.006184] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ +0.000045] #PF: supervisor read access in kernel mode [ +0.000023] #PF: error_code(0x0000) - not-present page [ +0.000023] PGD 0 P4D 0 [ +0.000018] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000023] CPU: 38 PID: 7540 Comm: kworker/38:1 Not tainted 6.8.0-rc7 #1 [ +0.000031] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ +0.000036] Workqueue: ice ice_service_task [ice] [ +0.000183] RIP: 0010:ice_clean_tx_ring+0xa/0xd0 [ice] [...] [ +0.000013] Call Trace: [ +0.000016] <TASK> [ +0.000014] ? __die+0x1f/0x70 [ +0.000029] ? page_fault_oops+0x171/0x4f0 [ +0.000029] ? schedule+0x3b/0xd0 [ +0.000027] ? exc_page_fault+0x7b/0x180 [ +0.000022] ? asm_exc_page_fault+0x22/0x30 [ +0.000031] ? ice_clean_tx_ring+0xa/0xd0 [ice] [ +0.000194] ice_free_tx_ring+0xe/0x60 [ice] [ +0.000186] ice_destroy_xdp_rings+0x157/0x310 [ice] [ +0.000151] ice_vsi_decfg+0x53/0xe0 [ice] [ +0.000180] ice_vsi_rebuild+0x239/0x540 [ice] [ +0.000186] ice_vsi_rebuild_by_type+0x76/0x180 [ice] [ +0.000145] ice_rebuild+0x18c/0x840 [ice] [ +0.000145] ? delay_tsc+0x4a/0xc0 [ +0.000022] ? delay_tsc+0x92/0xc0 [ +0.000020] ice_do_reset+0x140/0x180 [ice] [ +0.000886] ice_service_task+0x404/0x1030 [ice] [ +0.000824] process_one_work+0x171/0x340 [ +0.000685] worker_thread+0x277/0x3a0 [ +0.000675] ? preempt_count_add+0x6a/0xa0 [ +0.000677] ? _raw_spin_lock_irqsave+0x23/0x50 [ +0.000679] ? __pfx_worker_thread+0x10/0x10 [ +0.000653] kthread+0xf0/0x120 [ +0.000635] ? __pfx_kthread+0x10/0x10 [ +0.000616] ret_from_fork+0x2d/0x50 [ +0.000612] ? __pfx_kthread+0x10/0x10 [ +0.000604] ret_from_fork_asm+0x1b/0x30 [ +0.000604] </TASK> The previous way of handling this through returning -EBUSY is not viable, particularly when destroying AF_XDP socket, because the kernel proceeds with removal anyway. There is plenty of code between those calls and there is no need to create a large critical section that covers all of them, same as there is no need to protect ice_vsi_rebuild() with rtnl_lock(). Add xdp_state_lock mutex to protect ice_vsi_rebuild() and ice_xdp(). Leaving unprotected sections in between would result in two states that have to be considered: 1. when the VSI is closed, but not yet rebuild 2. when VSI is already rebuild, but not yet open The latter case is actually already handled through !netif_running() case, we just need to adjust flag checking a little. The former one is not as trivial, because between ice_vsi_close() and ice_vsi_rebuild(), a lot of hardware interaction happens, this can make adding/deleting rings exit with an error. Luckily, VSI rebuild is pending and can apply new configuration for us in a managed fashion. Therefore, add an additional VSI state flag ICE_VSI_REBUILD_PENDING to indicate that ice_xdp() can just hot-swap the program. Also, as ice_vsi_rebuild() flow is touched in this patch, make it more consistent by deconfiguring VSI when coalesce allocation fails. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12igc: Unlock on error in igc_io_resume()Dan Carpenter
[ Upstream commit ef4a99a0164e3972abb421cbb1b09ea6c61414df ] Call rtnl_unlock() on this error path, before returning. Fixes: bc23aa949aeb ("igc: Add pcie error handler support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12ice: Add netif_device_attach/detach into PF reset flowDawid Osuchowski
[ Upstream commit d11a67634227f9f9da51938af085fb41a733848f ] Ethtool callbacks can be executed while reset is in progress and try to access deleted resources, e.g. getting coalesce settings can result in a NULL pointer dereference seen below. Reproduction steps: Once the driver is fully initialized, trigger reset: # echo 1 > /sys/class/net/<interface>/device/reset when reset is in progress try to get coalesce settings using ethtool: # ethtool -c <interface> BUG: kernel NULL pointer dereference, address: 0000000000000020 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 11 PID: 19713 Comm: ethtool Tainted: G S 6.10.0-rc7+ #7 RIP: 0010:ice_get_q_coalesce+0x2e/0xa0 [ice] RSP: 0018:ffffbab1e9bcf6a8 EFLAGS: 00010206 RAX: 000000000000000c RBX: ffff94512305b028 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9451c3f2e588 RDI: ffff9451c3f2e588 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff9451c3f2e580 R11: 000000000000001f R12: ffff945121fa9000 R13: ffffbab1e9bcf760 R14: 0000000000000013 R15: ffffffff9e65dd40 FS: 00007faee5fbe740(0000) GS:ffff94546fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 0000000106c2e005 CR4: 00000000001706f0 Call Trace: <TASK> ice_get_coalesce+0x17/0x30 [ice] coalesce_prepare_data+0x61/0x80 ethnl_default_doit+0xde/0x340 genl_family_rcv_msg_doit+0xf2/0x150 genl_rcv_msg+0x1b3/0x2c0 netlink_rcv_skb+0x5b/0x110 genl_rcv+0x28/0x40 netlink_unicast+0x19c/0x290 netlink_sendmsg+0x222/0x490 __sys_sendto+0x1df/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x82/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7faee60d8e27 Calling netif_device_detach() before reset makes the net core not call the driver when ethtool command is issued, the attempt to execute an ethtool command during reset will result in the following message: netlink error: No such device instead of NULL pointer dereference. Once reset is done and ice_rebuild() is executing, the netif_device_attach() is called to allow for ethtool operations to occur again in a safe manner. Fixes: fcea6f3da546 ("ice: Add stats and ethtool support") Suggested-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com> Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12igb: Fix not clearing TimeSync interrupts for 82580Daiwei Li
[ Upstream commit ba8cf80724dbc09825b52498e4efacb563935408 ] 82580 NICs have a hardware bug that makes it necessary to write into the TSICR (TimeSync Interrupt Cause) register to clear it: https://lore.kernel.org/all/CDCB8BE0.1EC2C%25matthew.vick@intel.com/ Add a conditional so only for 82580 we write into the TSICR register, so we don't risk losing events for other models. Without this change, when running ptp4l with an Intel 82580 card, I get the following output: > timed out while polling for tx timestamp increasing tx_timestamp_timeout or > increasing kworker priority may correct this issue, but a driver bug likely > causes it This goes away with this change. This (partially) reverts commit ee14cc9ea19b ("igb: Fix missing time sync events"). Fixes: ee14cc9ea19b ("igb: Fix missing time sync events") Closes: https://lore.kernel.org/intel-wired-lan/CAN0jFd1kO0MMtOh8N2Ztxn6f7vvDKp2h507sMryobkBKe=xk=w@mail.gmail.com/ Tested-by: Daiwei Li <daiweili@google.com> Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Daiwei Li <daiweili@google.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12ice: Check all ice_vsi_rebuild() errors in functionEric Joyner
[ Upstream commit d47bf9a495cf424fad674321d943123dc12b926d ] Check the return value from ice_vsi_rebuild() and prevent the usage of incorrectly configured VSI. Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Eric Joyner <eric.joyner@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanupSouradeep Chakrabarti
commit b6ecc662037694488bfff7c9fd21c405df8411f2 upstream. Currently napi_disable() gets called during rxq and txq cleanup, even before napi is enabled and hrtimer is initialized. It causes kernel panic. ? page_fault_oops+0x136/0x2b0 ? page_counter_cancel+0x2e/0x80 ? do_user_addr_fault+0x2f2/0x640 ? refill_obj_stock+0xc4/0x110 ? exc_page_fault+0x71/0x160 ? asm_exc_page_fault+0x27/0x30 ? __mmdrop+0x10/0x180 ? __mmdrop+0xec/0x180 ? hrtimer_active+0xd/0x50 hrtimer_try_to_cancel+0x2c/0xf0 hrtimer_cancel+0x15/0x30 napi_disable+0x65/0x90 mana_destroy_rxq+0x4c/0x2f0 mana_create_rxq.isra.0+0x56c/0x6d0 ? mana_uncfg_vport+0x50/0x50 mana_alloc_queues+0x21b/0x320 ? skb_dequeue+0x5f/0x80 Cc: stable@vger.kernel.org Fixes: e1b5683ff62e ("net: mana: Move NAPI from EQ to CQ") Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12net: microchip: vcap: Fix use-after-free error in kunit testJens Emil Schulz Østergaard
commit a3c1e45156ad39f225cd7ddae0f81230a3b1e657 upstream. This is a clear use-after-free error. We remove it, and rely on checking the return code of vcap_del_rule. Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/kernel-janitors/7bffefc6-219a-4f71-baa0-ad4526e5c198@kili.mountain/ Fixes: c956b9b318d9 ("net: microchip: sparx5: Adding KUNIT tests of key/action values in VCAP API") Signed-off-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-08net/mlx5e: SHAMPO, Fix incorrect page releaseDragos Tatulea
[ Upstream commit 70bd03b89f20b9bbe51a7f73c4950565a17a45f7 ] Under the following conditions: 1) No skb created yet 2) header_size == 0 (no SHAMPO header) 3) header_index + 1 % MLX5E_SHAMPO_WQ_HEADER_PER_PAGE == 0 (this is the last page fragment of a SHAMPO header page) a new skb is formed with a page that is NOT a SHAMPO header page (it is a regular data page). Further down in the same function (mlx5e_handle_rx_cqe_mpwrq_shampo()), a SHAMPO header page from header_index is released. This is wrong and it leads to SHAMPO header pages being released more than once. Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240603212219.1037656-3-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08ionic: fix potential irq name truncationShannon Nelson
[ Upstream commit 3eb76e71b16e8ba5277bf97617aef51f5e64dbe4 ] Address a warning about potential string truncation based on the string buffer sizes. We can add some hints to the string format specifier to set limits on the resulting possible string to squelch the complaints. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240529000259.25775-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08net/mlx5: DR, Fix 'stack guard page was hit' error in dr_ruleYevgeny Kliteynik
[ Upstream commit 94a3ad6c081381fa9ee523781789802b4ed00faf ] This patch reduces the size of hw_ste_arr_optimized array that is allocated on stack from 640 bytes (5 match STEs + 5 action STES) to 448 bytes (2 match STEs + 5 action STES). This fixes the 'stack guard page was hit' issue, while still fitting majority of the usecases (up to 2 match STEs). Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://patch.msgid.link/20240730061638.1831002-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04net: mana: Fix race of mana_hwc_post_rx_wqe and new hwc responseHaiyang Zhang
commit 8af174ea863c72f25ce31cee3baad8a301c0cf0f upstream. The mana_hwc_rx_event_handler() / mana_hwc_handle_resp() calls complete(&ctx->comp_event) before posting the wqe back. It's possible that other callers, like mana_create_txq(), start the next round of mana_hwc_send_request() before the posting of wqe. And if the HW is fast enough to respond, it can hit no_wqe error on the HW channel, then the response message is lost. The mana driver may fail to create queues and open, because of waiting for the HW response and timed out. Sample dmesg: [ 528.610840] mana 39d4:00:02.0: HWC: Request timed out! [ 528.614452] mana 39d4:00:02.0: Failed to send mana message: -110, 0x0 [ 528.618326] mana 39d4:00:02.0 enP14804s2: Failed to create WQ object: -110 To fix it, move posting of rx wqe before complete(&ctx->comp_event). Cc: stable@vger.kernel.org Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-29net: ngbe: Fix phy mode set to external phyMengyuan Lou
commit f2916c83d746eb99f50f42c15cf4c47c2ea5f3b3 upstream. The MAC only has add the TX delay and it can not be modified. MAC and PHY are both set the TX delay cause transmission problems. So just disable TX delay in PHY, when use rgmii to attach to external phy, set PHY_INTERFACE_MODE_RGMII_RXID to phy drivers. And it is does not matter to internal phy. Fixes: bc2426d74aa3 ("net: ngbe: convert phylib to phylink") Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> Cc: stable@vger.kernel.org # 6.3+ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E6759CF1387CF84C+20240820030425.93003-1-mengyuanlou@net-swift.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: mengyuanlou <mengyuanlou@net-swift.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-29igc: Fix qbv tx latency by setting gtxoffsetFaizal Rahim
commit 6c3fc0b1c3d073bd6fc3bf43dbd0e64240537464 upstream. A large tx latency issue was discovered during testing when only QBV was enabled. The issue occurs because gtxoffset was not set when QBV is active, it was only set when launch time is active. The patch "igc: Correct the launchtime offset" only sets gtxoffset when the launchtime_enable field is set by the user. Enabling launchtime_enable ultimately sets the register IGC_TXQCTL_QUEUE_MODE_LAUNCHT (referred to as LaunchT in the SW user manual). Section 7.5.2.6 of the IGC i225/6 SW User Manual Rev 1.2.4 states: "The latency between transmission scheduling (launch time) and the time the packet is transmitted to the network is listed in Table 7-61." However, the patch misinterprets the phrase "launch time" in that section by assuming it specifically refers to the LaunchT register, whereas it actually denotes the generic term for when a packet is released from the internal buffer to the MAC transmit logic. This launch time, as per that section, also implicitly refers to the QBV gate open time, where a packet waits in the buffer for the QBV gate to open. Therefore, latency applies whenever QBV is in use. TSN features such as QBU and QAV reuse QBV, making the latency universal to TSN features. Discussed with i226 HW owner (Shalev, Avi) and we were in agreement that the term "launch time" used in Section 7.5.2.6 is not clear and can be easily misinterpreted. Avi will update this section to: "When TQAVCTRL.TRANSMIT_MODE = TSN, the latency between transmission scheduling and the time the packet is transmitted to the network is listed in Table 7-61." Fix this issue by using igc_tsn_is_tx_mode_in_tsn() as a condition to write to gtxoffset, aligning with the newly updated SW User Manual. Tested: 1. Enrol taprio on talker board base-time 0 cycle-time 1000000 flags 0x2 index 0 cmd S gatemask 0x1 interval1 index 0 cmd S gatemask 0x1 interval2 Note: interval1 = interval for a 64 bytes packet to go through interval2 = cycle-time - interval1 2. Take tcpdump on listener board 3. Use udp tai app on talker to send packets to listener 4. Check the timestamp on listener via wireshark Test Result: 100 Mbps: 113 ~193 ns 1000 Mbps: 52 ~ 84 ns 2500 Mbps: 95 ~ 223 ns Note that the test result is similar to the patch "igc: Correct the launchtime offset". Fixes: 790835fcc0cb ("igc: Correct the launchtime offset") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-29cxgb4: add forgotten u64 ivlan cast before shiftNikolay Kuratov
commit 80a1e7b83bb1834b5568a3872e64c05795d88f31 upstream. It is done everywhere in cxgb4 code, e.g. in is_filter_exact_match() There is no reason it should not be done here Found by Linux Verification Center (linuxtesting.org) with SVACE Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru> Cc: stable@vger.kernel.org Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters") Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240819075408.92378-1-kniv@yandex-team.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-29net: xilinx: axienet: Fix dangling multicast addressesSean Anderson
[ Upstream commit 797a68c9de0f5a5447baf4bd3bb9c10a3993435b ] If a multicast address is removed but there are still some multicast addresses, that address would remain programmed into the frame filter. Fix this by explicitly setting the enable bit for each filter. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240822154059.1066595-3-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29net: xilinx: axienet: Always disable promiscuous modeSean Anderson
[ Upstream commit 4ae738dfef2c0323752ab81786e2d298c9939321 ] If promiscuous mode is disabled when there are fewer than four multicast addresses, then it will not be reflected in the hardware. Fix this by always clearing the promiscuous mode flag even when we program multicast addresses. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240822154059.1066595-2-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29octeontx2-af: Fix CPT AF register offset calculationBharat Bhushan
[ Upstream commit af688a99eb1fc7ef69774665d61e6be51cea627a ] Some CPT AF registers are per LF and others are global. Translation of PF/VF local LF slot number to actual LF slot number is required only for accessing perf LF registers. CPT AF global registers access do not require any LF slot number. Also, there is no reason CPT PF/VF to know actual lf's register offset. Without this fix microcode loading will fail, VFs cannot be created and hardware is not usable. Fixes: bc35e28af789 ("octeontx2-af: replace cpt slot with lf id on reg write") Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240821070558.1020101-1-bbhushan2@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29bnxt_en: Fix double DMA unmapping for XDP_REDIRECTSomnath Kotur
[ Upstream commit 8baeef7616d5194045c5a6b97fd1246b87c55b13 ] Remove the dma_unmap_page_attrs() call in the driver's XDP_REDIRECT code path. This should have been removed when we let the page pool handle the DMA mapping. This bug causes the warning: WARNING: CPU: 7 PID: 59 at drivers/iommu/dma-iommu.c:1198 iommu_dma_unmap_page+0xd5/0x100 CPU: 7 PID: 59 Comm: ksoftirqd/7 Tainted: G W 6.8.0-1010-gcp #11-Ubuntu Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.15.2 04/02/2024 RIP: 0010:iommu_dma_unmap_page+0xd5/0x100 Code: 89 ee 48 89 df e8 cb f2 69 ff 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 31 f6 31 ff 45 31 c0 e9 ab 17 71 00 <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 RSP: 0018:ffffab1fc0597a48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff99ff838280c8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffab1fc0597a78 R08: 0000000000000002 R09: ffffab1fc0597c1c R10: ffffab1fc0597cd3 R11: ffff99ffe375acd8 R12: 00000000e65b9000 R13: 0000000000000050 R14: 0000000000001000 R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffff9a06efb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000565c34c37210 CR3: 00000005c7e3e000 CR4: 0000000000350ef0 ? show_regs+0x6d/0x80 ? __warn+0x89/0x150 ? iommu_dma_unmap_page+0xd5/0x100 ? report_bug+0x16a/0x190 ? handle_bug+0x51/0xa0 ? exc_invalid_op+0x18/0x80 ? iommu_dma_unmap_page+0xd5/0x100 ? iommu_dma_unmap_page+0x35/0x100 dma_unmap_page_attrs+0x55/0x220 ? bpf_prog_4d7e87c0d30db711_xdp_dispatcher+0x64/0x9f bnxt_rx_xdp+0x237/0x520 [bnxt_en] bnxt_rx_pkt+0x640/0xdd0 [bnxt_en] __bnxt_poll_work+0x1a1/0x3d0 [bnxt_en] bnxt_poll+0xaa/0x1e0 [bnxt_en] __napi_poll+0x33/0x1e0 net_rx_action+0x18a/0x2f0 Fixes: 578fcfd26e2a ("bnxt_en: Let the page pool manage the DMA mapping") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240820203415.168178-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29igb: cope with large MAX_SKB_FRAGSPaolo Abeni
[ Upstream commit 8aba27c4a5020abdf60149239198297f88338a8d ] Sabrina reports that the igb driver does not cope well with large MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload corruption on TX. An easy reproducer is to run ssh to connect to the machine. With MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has been reported originally in https://bugzilla.redhat.com/show_bug.cgi?id=2265320 The root cause of the issue is that the driver does not take into account properly the (possibly large) shared info size when selecting the ring layout, and will try to fit two packets inside the same 4K page even when the 1st fraglist will trump over the 2nd head. Address the issue by checking if 2K buffers are insufficient. Fixes: 3948b05950fd ("net: introduce a config option to tweak MAX_SKB_FRAGS") Reported-by: Jan Tluka <jtluka@redhat.com> Reported-by: Jirka Hladky <jhladky@redhat.com> Reported-by: Sabrina Dubroca <sd@queasysnail.net> Tested-by: Sabrina Dubroca <sd@queasysnail.net> Tested-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Link: https://patch.msgid.link/20240816152034.1453285-1-vinschen@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29dpaa2-switch: Fix error checking in dpaa2_switch_seed_bp()Dan Carpenter
[ Upstream commit c50e7475961c36ec4d21d60af055b32f9436b431 ] The dpaa2_switch_add_bufs() function returns the number of bufs that it was able to add. It returns BUFS_PER_CMD (7) for complete success or a smaller number if there are not enough pages available. However, the error checking is looking at the total number of bufs instead of the number which were added on this iteration. Thus the error checking only works correctly for the first iteration through the loop and subsequent iterations are always counted as a success. Fix this by checking only the bufs added in the current iteration. Fixes: 0b1b71370458 ("staging: dpaa2-switch: handle Rx path on control interface") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://patch.msgid.link/eec27f30-b43f-42b6-b8ee-04a6f83423b6@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29ice: fix truesize operations for PAGE_SIZE >= 8192Maciej Fijalkowski
[ Upstream commit d53d4dcce69be5773e2d0878c9899ebfbf58c393 ] When working on multi-buffer packet on arch that has PAGE_SIZE >= 8192, truesize is calculated and stored in xdp_buff::frame_sz per each processed Rx buffer. This means that frame_sz will contain the truesize based on last received buffer, but commit 1dc1a7e7f410 ("ice: Centrallize Rx buffer recycling") assumed this value will be constant for each buffer, which breaks the page recycling scheme and mess up the way we update the page::page_offset. To fix this, let us work on constant truesize when PAGE_SIZE >= 8192 instead of basing this on size of a packet read from Rx descriptor. This way we can simplify the code and avoid calculating truesize per each received frame and on top of that when using xdp_update_skb_shared_info(), current formula for truesize update will be valid. This means ice_rx_frame_truesize() can be removed altogether. Furthermore, first call to it within ice_clean_rx_irq() for 4k PAGE_SIZE was redundant as xdp_buff::frame_sz is initialized via xdp_init_buff() in ice_vsi_cfg_rxq(). This should have been removed at the point where xdp_buff struct started to be a member of ice_rx_ring and it was no longer a stack based variable. There are two fixes tags as my understanding is that the first one exposed us to broken truesize and page_offset handling and then second introduced broken skb_shared_info update in ice_{construct,build}_skb(). Reported-and-tested-by: Luiz Capitulino <luizcap@redhat.com> Closes: https://lore.kernel.org/netdev/8f9e2a5c-fd30-4206-9311-946a06d031bb@redhat.com/ Fixes: 1dc1a7e7f410 ("ice: Centrallize Rx buffer recycling") Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29ice: fix ICE_LAST_OFFSET formulaMaciej Fijalkowski
[ Upstream commit b966ad832942b5a11e002f9b5ef102b08425b84a ] For bigger PAGE_SIZE archs, ice driver works on 3k Rx buffers. Therefore, ICE_LAST_OFFSET should take into account ICE_RXBUF_3072, not ICE_RXBUF_2048. Fixes: 7237f5b0dba4 ("ice: introduce legacy Rx flag") Suggested-by: Luiz Capitulino <luizcap@redhat.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29ice: fix page reuse when PAGE_SIZE is over 8kMaciej Fijalkowski
[ Upstream commit 50b2143356e888777fc5bca023c39f34f404613a ] Architectures that have PAGE_SIZE >= 8192 such as arm64 should act the same as x86 currently, meaning reuse of a page should only take place when no one else is busy with it. Do two things independently of underlying PAGE_SIZE: - store the page count under ice_rx_buf::pgcnt - then act upon its value vs ice_rx_buf::pagecnt_bias when making the decision regarding page reuse Fixes: 2b245cb29421 ("ice: Implement transmit and NAPI support") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29net: mscc: ocelot: serialize access to the injection/extraction groupsVladimir Oltean
[ Upstream commit c5e12ac3beb0dd3a718296b2d8af5528e9ab728e ] As explained by Horatiu Vultur in commit 603ead96582d ("net: sparx5: Add spinlock for frame transmission from CPU") which is for a similar hardware design, multiple CPUs can simultaneously perform injection or extraction. There are only 2 register groups for injection and 2 for extraction, and the driver only uses one of each. So we'd better serialize access using spin locks, otherwise frame corruption is possible. Note that unlike in sparx5, FDMA in ocelot does not have this issue because struct ocelot_fdma_tx_ring already contains an xmit_lock. I guess this is mostly a problem for NXP LS1028A, as that is dual core. I don't think VSC7514 is. So I'm blaming the commit where LS1028A (aka the felix DSA driver) started using register-based packet injection and extraction. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q"Vladimir Oltean
[ Upstream commit e1b9e80236c540fa85d76e2d510d1b38e1968c5d ] There are 2 distinct code paths (listed below) in the source code which set up an injection header for Ocelot(-like) switches. Code path (2) lacks the QoS class and source port being set correctly. Especially the improper QoS classification is a problem for the "ocelot-8021q" alternative DSA tagging protocol, because we support tc-taprio and each packet needs to be scheduled precisely through its time slot. This includes PTP, which is normally assigned to a traffic class other than 0, but would be sent through TC 0 nonetheless. The code paths are: (1) ocelot_xmit_common() from net/dsa/tag_ocelot.c - called only by the standard "ocelot" DSA tagging protocol which uses NPI-based injection - sets up bit fields in the tag manually to account for a small difference (destination port offset) between Ocelot and Seville. Namely, ocelot_ifh_set_dest() is omitted out of ocelot_xmit_common(), because there's also seville_ifh_set_dest(). (2) ocelot_ifh_set_basic(), called by: - ocelot_fdma_prepare_skb() for FDMA transmission of the ocelot switchdev driver - ocelot_port_xmit() -> ocelot_port_inject_frame() for register-based transmission of the ocelot switchdev driver - felix_port_deferred_xmit() -> ocelot_port_inject_frame() for the DSA tagger ocelot-8021q when it must transmit PTP frames (also through register-based injection). sets the bit fields according to its own logic. The problem is that (2) doesn't call ocelot_ifh_set_qos_class(). Copying that logic from ocelot_xmit_common() fixes that. Unfortunately, although desirable, it is not easily possible to de-duplicate code paths (1) and (2), and make net/dsa/tag_ocelot.c directly call ocelot_ifh_set_basic()), because of the ocelot/seville difference. This is the "minimal" fix with some logic duplicated (but at least more consolidated). Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29net: mscc: ocelot: use ocelot_xmit_get_vlan_info() also for FDMA and ↵Vladimir Oltean
register injection [ Upstream commit 67c3ca2c5cfe6a50772514e3349b5e7b3b0fac03 ] Problem description ------------------- On an NXP LS1028A (felix DSA driver) with the following configuration: - ocelot-8021q tagging protocol - VLAN-aware bridge (with STP) spanning at least swp0 and swp1 - 8021q VLAN upper interfaces on swp0 and swp1: swp0.700, swp1.700 - ptp4l on swp0.700 and swp1.700 we see that the ptp4l instances do not see each other's traffic, and they all go to the grand master state due to the ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES condition. Jumping to the conclusion for the impatient ------------------------------------------- There is a zero-day bug in the ocelot switchdev driver in the way it handles VLAN-tagged packet injection. The correct logic already exists in the source code, in function ocelot_xmit_get_vlan_info() added by commit 5ca721c54d86 ("net: dsa: tag_ocelot: set the classified VLAN during xmit"). But it is used only for normal NPI-based injection with the DSA "ocelot" tagging protocol. The other injection code paths (register-based and FDMA-based) roll their own wrong logic. This affects and was noticed on the DSA "ocelot-8021q" protocol because it uses register-based injection. By moving ocelot_xmit_get_vlan_info() to a place that's common for both the DSA tagger and the ocelot switch library, it can also be called from ocelot_port_inject_frame() in ocelot.c. We need to touch the lines with ocelot_ifh_port_set()'s prototype anyway, so let's rename it to something clearer regarding what it does, and add a kernel-doc. ocelot_ifh_set_basic() should do. Investigation notes ------------------- Debugging reveals that PTP event (aka those carrying timestamps, like Sync) frames injected into swp0.700 (but also swp1.700) hit the wire with two VLAN tags: 00000000: 01 1b 19 00 00 00 00 01 02 03 04 05 81 00 02 bc ~~~~~~~~~~~ 00000010: 81 00 02 bc 88 f7 00 12 00 2c 00 00 02 00 00 00 ~~~~~~~~~~~ 00000020: 00 00 00 00 00 00 00 00 00 00 00 01 02 ff fe 03 00000030: 04 05 00 01 00 04 00 00 00 00 00 00 00 00 00 00 00000040: 00 00 The second (unexpected) VLAN tag makes felix_check_xtr_pkt() -> ptp_classify_raw() fail to see these as PTP packets at the link partner's receiving end, and return PTP_CLASS_NONE (because the BPF classifier is not written to expect 2 VLAN tags). The reason why packets have 2 VLAN tags is because the transmission code treats VLAN incorrectly. Neither ocelot switchdev, nor felix DSA, declare the NETIF_F_HW_VLAN_CTAG_TX feature. Therefore, at xmit time, all VLANs should be in the skb head, and none should be in the hwaccel area. This is done by: static struct sk_buff *validate_xmit_vlan(struct sk_buff *skb, netdev_features_t features) { if (skb_vlan_tag_present(skb) && !vlan_hw_offload_capable(features, skb->vlan_proto)) skb = __vlan_hwaccel_push_inside(skb); return skb; } But ocelot_port_inject_frame() handles things incorrectly: ocelot_ifh_port_set(ifh, port, rew_op, skb_vlan_tag_get(skb)); void ocelot_ifh_port_set(struct sk_buff *skb, void *ifh, int port, u32 rew_op) { (...) if (vlan_tag) ocelot_ifh_set_vlan_tci(ifh, vlan_tag); (...) } The way __vlan_hwaccel_push_inside() pushes the tag inside the skb head is by calling: static inline void __vlan_hwaccel_clear_tag(struct sk_buff *skb) { skb->vlan_present = 0; } which does _not_ zero out skb->vlan_tci as seen by skb_vlan_tag_get(). This means that ocelot, when it calls skb_vlan_tag_get(), sees (and uses) a residual skb->vlan_tci, while the same VLAN tag is _already_ in the skb head. The trivial fix for double VLAN headers is to replace the content of ocelot_ifh_port_set() with: if (skb_vlan_tag_present(skb)) ocelot_ifh_set_vlan_tci(ifh, skb_vlan_tag_get(skb)); but this would not be correct either, because, as mentioned, vlan_hw_offload_capable() is false for us, so we'd be inserting dead code and we'd always transmit packets with VID=0 in the injection frame header. I can't actually test the ocelot switchdev driver and rely exclusively on code inspection, but I don't think traffic from 8021q uppers has ever been injected properly, and not double-tagged. Thus I'm blaming the introduction of VLAN fields in the injection header - early driver code. As hinted at in the early conclusion, what we _want_ to happen for VLAN transmission was already described once in commit 5ca721c54d86 ("net: dsa: tag_ocelot: set the classified VLAN during xmit"). ocelot_xmit_get_vlan_info() intends to ensure that if the port through which we're transmitting is under a VLAN-aware bridge, the outer VLAN tag from the skb head is stripped from there and inserted into the injection frame header (so that the packet is processed in hardware through that actual VLAN). And in all other cases, the packet is sent with VID=0 in the injection frame header, since the port is VLAN-unaware and has logic to strip this VID on egress (making it invisible to the wire). Fixes: 08d02364b12f ("net: mscc: fix the injection header") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29ionic: check cmd_regs before copying in or outShannon Nelson
[ Upstream commit 7662fad348ac54120e9e6443cb0bbe4f3b582219 ] Since we now have potential cases of NULL cmd_regs and info_regs during a reset recovery, and left NULL if a reset recovery has failed, we need to check that they exist before we use them. Most of the cases were covered in the original patch where we verify before doing the ioreadb() for health or cmd status. However, we need to protect a few uses of io mem that could be hit in error recovery or asynchronous threads calls as well (e.g. ethtool or devlink handlers). Fixes: 219e183272b4 ("ionic: no fw read when PCI reset failed") Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29ionic: use pci_is_enabled not open codeShannon Nelson
[ Upstream commit 121e4dcba3700b30e63f25203d09ddfccbab4a09 ] Since there is a utility available for this, use the API rather than open code. Fixes: 13943d6c8273 ("ionic: prevent pci disable of already disabled device") Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29net: hns3: add checking for vf id of mailboxJian Shen
[ Upstream commit 4e2969a0d6a7549bc0bc1ebc990588b622c4443d ] Add checking for vf id of mailbox, in order to avoid array out-of-bounds risk. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 01:47:46 +0000